This adds basic support for the stm32f446.
This consists of:
* New DMA model for stm32f4
* New clock domain support.
* MCO oscillator gpio export support.
* Flash support for irregular blocks.
BUG=chromium:608039
TEST=boots w/ correct clock, stm32f0 also boots.
BRANCH=None
Change-Id: I1c5cf6ddca09009c9dac60da8a3d0c5ceedfcf4d
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/363992
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
This change modifies the behavior of RBOX by blocking the key0 and key1
output, when the power button is pressed. It also adds support for
printing debug statements when various RBOX interrupts are triggered.
BUG=none
BRANCH=none
TEST=On cr50 test board verify key0 and key1 out are not asserted unless
the power button is pressed.
Change-Id: I67a3c1b8009279015bdc87bcf0995cffa9ab6f03
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/341470
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This adds support for RD Detection on cr50. It can be used to detect a
debug device and signal the controller to switch from the AP PHY to the
to CCD PHY. When RDCC1 and 2 no longer detect the debug device, then
the controller switches back to using the USB to AP PHY.
BUG=chrome-os-partner:50700
BRANCH=none
TEST=change the value on RDCC1 and RDCC1 and check that the usb
controller connects to the right PHY.
Change-Id: Ice01a45a31fe1932945f89df2e3b851f4d287a17
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/338454
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Rather than having various PWM module groups initialized from various
HOOK_INIT functions, group them all into a single module and initialize
them all from a common function in pwm.c.
BUG=chromium:563708
TEST=Manual on samus / samus_pd (with CONFIG_ADC enabled). Verify that
samus fan + KB backlight control is functional and samus_pd correctly
sets PWM output.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9f9b09bfa544cd9bc6b7a867e77757dff0505941
Reviewed-on: https://chromium-review.googlesource.com/314882
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove assumption of only one SPI master going to the SPI flash.
SPI3 can be used as second SPI master.
Define a new module type, SPI_FLASH, that can be turned
on/off when flash is not in used without impacting other
SPI masters.
BRANCH=smaug
BUG=chrome-os-partner:42304
TEST=Test on Ryu board.
Change-Id: Ie72471cea6f0a357ffee055a610d032580a794e7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288514
A purely cosmetic change making it easier to convert numbers into
enums when analyzing debug printouts.
BRANCH=none
BUG=none
TEST='make buildall -j' still succeeds.
Change-Id: I078a1d253fe928a1390cbed9baf7786a239fa01d
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/268402
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This driver can be used to access multiple usarts using an abstract
stream interface. The stream interface can also be used in drivers
for the host interface and USB console interface, providing a
consistent API across all character stream style IO.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: Icf567f0b0fa4eb0e9ad4cdb0be8edc31c937a7de
Reviewed-on: https://chromium-review.googlesource.com/209671
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Enough USB support to be able to enumerate the device and use bulk or
interrupt endpoints.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28295
TEST=with the following USB console CL, connect a Fruitpie through USB
and use its console over USB.
Change-Id: I37b7f3b6a754cb82ab5f940ea20122d2e16b3b5b
Reviewed-on: https://chromium-review.googlesource.com/193983
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
These boards are unloved and unsupported. They'll never grow up to be
laptops, and hardware is increasingly hard to come by.
Comparable functionality is available in the other, more-loved boards.
Removing these boards speeds up util/make_all.sh by 40%. (If you're
not running that before every upload, you should be...)
BUG=chrome-os-partner:24062
BRANCH=none
TEST=build all remaining platforms and pass unit tests
Change-Id: I4d8a49e4d52d7393471f1b1cbef059c8db4a4f77
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177373
This is tidier than every board defining its own module_id enum, and
encourages standard naming of modules.
A subsequent CL will do more cleanup (standardizing on MODULE_LED
instead of MODULE_POWER_LED and MODULE_LED_KIRBY), but it's easier to
do that as a separate CL than part of this one.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: If0fcef284fb3aa2fa145bc9ff3d1f3f2d25a2e47
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174382
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
