Vic Yang 0fefd25c0c Temperature polling and temporal correction ...

A temperature polling task is added to achieve temporal correction and
also reduce the latency of reading temperature.

Factor out sensor specific part to keep code clean.

Signed-off-by: Vic Yang <victoryang@chromium.org>

BUG=chrome-os-partner:7801
TEST=On link, 'temps' shows all temperature readings.
Cover each sensor with hand and see object temperature rise.
Compilation succeeded on bds/adv/daisy/discovery.

Change-Id: I3c44c8b2e3ab2aa9ce640d3fc25e7fba56534b86

2012-02-18 13:37:53 +08:00

..

adc.h

Add forward declarations in ADC and temp_sensor headers

2012-02-06 13:36:19 -08:00

charger.h

Add basic smart battery driver

2012-02-10 16:12:56 -08:00

chip_temp_sensor.h

Temperature polling and temporal correction

2012-02-18 13:37:53 +08:00

clock.h

Initial sources import 3/3

2011-12-07 19:10:02 +00:00

common.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

console.h

register console commands at compile-time

2012-01-24 00:50:08 +00:00

eeprom.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

flash_commands.h

Support flash checksum command for re-transmit.

2011-12-12 21:24:48 +08:00

flash.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

fpu.h

Change TMP006 temperature calculation to use FP.

2012-02-15 16:34:54 -08:00

gpio.h

GPIO interrupts are disabled by default

2012-01-13 10:34:09 -08:00

host_command.h

Add user-mode LPC endpoint

2011-12-08 16:18:20 -08:00

hwtimer.h

Split the timer code between OS code and hardware dependant code.

2012-01-25 22:50:07 +00:00

i2c.h

Add 8-bit I2C read/write functions.

2012-02-13 16:16:10 -08:00

i8042.h

Fix the missing IRQ problem.

2012-02-02 20:51:45 +08:00

jtag.h

Add JTAG module

2012-01-11 11:37:55 -08:00

keyboard_scan.h

Check for recovery key sequence at init

2012-02-14 10:51:24 -08:00

keyboard.h

Make i8042 independent of host <--> KBC bus.

2012-02-15 18:20:28 -08:00

lpc_commands.h

USB charging control LPC command.

2012-02-16 12:45:51 -08:00

lpc.h

Reduce LPC command parameters to 128 bytes; add LPC memory-mapped space

2012-02-15 15:12:03 -08:00

memory_commands.h

Initial sources import 2/3

2011-12-07 19:10:02 +00:00

peci.h

Temperature polling and temporal correction

2012-02-18 13:37:53 +08:00

port80.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

power_button.h

Split power button code into its own file

2012-01-10 14:14:59 -08:00

powerdemo.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

pwm_commands.h

Add EC host command to control fan speed.

2011-12-27 10:14:29 +08:00

pwm.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

shared_mem.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

smart_battery.h

Add basic smart battery driver

2012-02-10 16:12:56 -08:00

system.h

Split reset cause and image copy code.

2012-01-26 22:34:41 +00:00

task_id.h

Initial mutex implementation

2012-01-25 18:23:48 +00:00

task.h

FPU control

2012-02-16 05:42:08 +08:00

temp_sensor_commands.h

Add host command to read temperature sensor value

2011-12-22 13:51:07 +08:00

temp_sensor.h

Temperature polling and temporal correction

2012-02-18 13:37:53 +08:00

timer.h

Initial sources import 3/3

2011-12-07 19:10:02 +00:00

tmp006.h

Temperature polling and temporal correction

2012-02-18 13:37:53 +08:00

uart.h

Delay enabling UART1 until after LPC bus is enabled.

2012-02-17 15:55:32 -08:00

usb_charge_commands.h

USB charging control LPC command.

2012-02-16 12:45:51 -08:00

usb_charge.h

USB Charging control

2012-01-19 10:54:37 +08:00

util.h

stm32l: add UART driver

2012-01-31 22:29:13 +00:00

vboot.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

version.h

Initial sources import 1/3

2011-12-07 19:10:02 +00:00

watchdog.h

Move SoC-independant headers to another directory

2012-01-26 01:29:48 +00:00

x86_power.h

Send scan code to host when power button is pressed/released.

2012-02-10 12:11:42 +08:00