nagendra modadugu a8473bf87d CR50: add a simple ASN.1 parser & certificate verifier ...

Add a certificate verifier, so that endorsement
certificates may be verified upon installation.
Doing so allows for catching certificate errors early.

BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
TEST=all tests in test/tpm_test/tpmtest.py pass

Change-Id: I9339a6bc36e4d82ae875ce774e31848ae983fa1f
Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/351031
Commit-Ready: Nagendra Modadugu <ngm@google.com>
Tested-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>

2016-06-12 04:38:01 -07:00

..

dcrypto

CR50: add a simple ASN.1 parser & certificate verifier

2016-06-12 04:38:01 -07:00

loader

CR50: fix bug in rom_flash.c debug print message

2016-06-10 00:18:01 -07:00

blob.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

build.mk

CR50: add a simple ASN.1 parser & certificate verifier

2016-06-12 04:38:01 -07:00

clock.c

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

config_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

flash_config.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash_info.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash.c

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

gpio.c

Cr50: Add DIO_PULL_UP and DIO_PULL_DOWN flags

2016-04-15 21:29:25 -07:00

hw_regdefs.h

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

hwtimer.c

Timer initialization & conversion bug fixes

2016-05-28 01:45:31 +00:00

i2cs.c

g: i2c slave driver

2016-04-27 18:12:25 -07:00

i2cs.h

g: i2c slave driver

2016-04-27 18:12:25 -07:00

idle.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

init_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

jitter.c

g: Enable SOF calibration after first SOF token

2016-06-08 14:02:22 -07:00

jtag.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

pmu.c

cr50: code modifications to support FPGA B1

2015-08-11 02:58:45 +00:00

pmu.h

Cr50: Fixed soft resets on silicon.

2016-02-01 21:17:22 +00:00

polling_uart.c

cr50: add polling uart implementation

2015-08-11 02:58:39 +00:00

rbox.c

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

rbox.h

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

rdd.c

g: drop: always start with USB facing external port

2016-05-02 17:35:45 -07:00

rdd.h

cr50: enable AP and EC UART in CCD MODE

2016-04-15 21:29:17 -07:00

registers.h

g: Add GR_KEYMGR_HKEY_FRR to registers.h

2016-05-16 11:52:34 -07:00

signed_header.h

Modified the bootloader to check PMU_PWRDN_SCRATCH30 and load the newer

2016-01-28 20:58:32 +00:00

spi_master.c

cr50: enable AP and EC flash access

2016-04-26 14:21:00 -07:00

spi_master.h

Cr50: Export the chip-specific SPI master functions

2016-05-31 22:16:42 +00:00

sps_tpm.c

Cr50: Sleep only when SPS has been quiet for a while

2016-04-03 10:27:39 -07:00

sps.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

sps.h

cr50: sps: allow receive registration function set FIFO threshold

2015-08-13 23:34:05 +00:00

system.c

Cr50: Include low-power exit triggers in reset causes

2016-03-30 20:38:13 -07:00

trng.c

cr50: trng: handle (unlikely) TRNG timeout

2016-03-14 20:11:30 -07:00

uart.c

UART: Remove enable/disable interrupt functions

2016-04-27 10:10:02 -07:00

uartn.c

cr50: disable UART peripheral when the device is powered off.

2016-05-27 18:08:51 -07:00

uartn.h

cr50: disable UART peripheral when the device is powered off.

2016-05-27 18:08:51 -07:00

upgrade_fw.c

CR50: port dcrypto/cr50 code to depend on third_party/cryptoc

2016-05-31 23:58:31 -07:00

upgrade_fw.h

Cr50: Update the USB VID:PID:subclass constants

2016-04-15 15:09:08 -07:00

usart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usart.h

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usb_console.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb_endpoints.S

cr50: add USB support

2015-04-02 20:27:46 +00:00

usb_hid.c

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_hw.h

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_spi.c

g: implement EC/AP flash access via CCD

2016-06-03 20:14:58 -07:00

usb_spi.h

g: implement EC/AP flash access via CCD

2016-06-03 20:14:58 -07:00

usb_upgrade.c

g: enhance upgrade protocol to allow upgrade block restarts

2016-05-02 17:35:46 -07:00

usb-stream.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

usb-stream.h

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb.c

g: Enable SOF calibration after first SOF token

2016-06-08 14:02:22 -07:00

watchdog.c

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00