Nicolas Boichat 14e70e3019 charge_state_v2: Use lid and base batteries to determine if near full ...

When reporting state, current code was only using the lid battery
level to determine if we are "near full" (different LED color).

Fix this to include both lid and base batteries in the logic.

BRANCH=none
BUG=b:75982704
TEST=Lid at 100%, base at 50%, LED is amber when charging.
     Disconnect base => LED turns white (lid is near full)

Change-Id: I6fd44a16832cbd6d440f1bbb8c696e41c3f4699b
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/983202
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>

2018-03-28 23:23:48 -07:00

..

vboot

EFS: Perform EFS even if flash WP is enabled

2018-03-16 18:31:27 -07:00

acpi.c

battery: Allow 2 batteries to be fetched via ACPI

2018-02-09 07:55:33 -08:00

adc.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

als.c

ec_als: ALS now uses CPRINT macros

2017-12-28 14:50:29 -08:00

ap_hang_detect.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

backlight_lid.c

backlight: Adding support for active low GPIO signal

2018-01-18 05:09:37 -08:00

base32.c

common: Substitute modified CRC8 with CRC-5-USB

2017-09-12 16:17:03 -07:00

battery.c

battery: Allow 2 batteries to be fetched via ACPI

2018-02-09 07:55:33 -08:00

bluetooth_le.c

btle: Cleanup: Moved constants, renamed functions

2016-08-11 14:46:33 -07:00

btle_hci_controller.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

btle_ll.c

btle_ll.c: Initialize variables to fix GCC warnings

2016-11-16 19:04:31 -08:00

build.mk

common: Add support for PWM LEDs.

2018-02-05 23:05:39 -08:00

button.c

config: Add CONFIG_BUTTON_TRIGGERED_RECOVERY.

2017-12-18 22:55:02 -08:00

capsense.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

cbi.c

CBI: Share common code between host tool and firmware

2018-02-23 03:36:35 -08:00

ccd_config.c

cr50: include GscFullConsole in rma open

2018-03-01 16:13:34 -08:00

charge_manager.c

usbc: add config support for multiple (and no) vbus adc channels

2018-03-09 20:05:13 -08:00

charge_ramp_sw.c

chg_ramp: Add charge_is_consuming_full_input_current().

2017-11-01 16:47:21 -07:00

charge_ramp.c

charge_ramp: Ramp USB-C DTS sources

2017-10-19 12:56:42 -07:00

charge_state_v2.c

charge_state_v2: Use lid and base batteries to determine if near full

2018-03-28 23:23:48 -07:00

charger_profile_override.c

charger_profile: support multiple battery voltage range thresholds

2017-02-10 19:02:55 -08:00

charger.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

chipset.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

Cr50: The chan command is not safe.

2016-10-01 03:13:43 +00:00

console.c

Fix inconsistent task function declarations

2017-08-08 14:56:13 -07:00

crc8.c

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.c

ec: add crc32_ctx..() to take context parameter.

2018-02-23 23:13:01 -08:00

ctz.c

common: Add software CTZ implementation when needeed

2017-11-16 23:32:11 -08:00

curve25519-generic.c

core/cortex-m0/curve25519: Integrate fast curve25519 implementation

2017-07-03 21:44:34 -07:00

curve25519.c

core/cortex-m0/curve25519: Integrate fast curve25519 implementation

2017-07-03 21:44:34 -07:00

device_event.c

Add support for reporting device events

2017-06-30 03:08:42 -07:00

device_state.c

cr50: Clean up device state code

2017-08-08 17:34:09 -07:00

dptf.c

eve: Move DPTF tablet mode support to common code

2017-02-14 14:50:36 -08:00

ec_ec_comm_master.c

common/ec_ec_comm_master/slave: Add support for EC hibernate

2018-03-28 23:23:31 -07:00

ec_ec_comm_slave.c

common/ec_ec_comm_master/slave: Add support for EC hibernate

2018-03-28 23:23:31 -07:00

ec_features.c

make EC_FEATURE_RWSIG definition more useful

2018-03-01 16:13:10 -08:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

espi.c

espi: Add API to test if signal is eSPI virtual wire

2018-01-02 15:48:20 -08:00

event_log.c

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

extension.c

cr50: Allow spihash extension command over USB

2018-02-20 22:50:10 -08:00

extpower_gpio.c

extpower: Allow board to override signal debounce time

2016-09-02 07:11:33 -07:00

fan.c

fan: Allow board to configure fans at run time

2018-03-06 09:59:21 -08:00

firmware_image.lds.S

npcx: Build RW_B and support sysjump to it

2017-07-13 19:45:57 -07:00

firmware_image.S

npcx: Build RW_B and support sysjump to it

2017-07-13 19:45:57 -07:00

flash.c

gru: Remove flashinfo command for RAM savings

2017-11-09 19:16:33 -08:00

fmap.c

EFS: Add SIG_RW_B in fmap

2018-01-10 12:58:55 -08:00

fpsensor.c

fpsensor: add enrollment and matching interface

2018-03-20 07:24:25 -07:00

gesture.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

gpio_commands.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

gpio.c

ec_gpio: Add GPIO power down support

2017-12-28 12:35:08 -08:00

hooks.c

stm32/usb: Add HOOK_USB_PM_CHANGE, called when USB is resumed/suspended

2018-02-02 10:17:30 -08:00

host_command_master.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

host_command_pd.c

Fix inconsistent task function declarations

2017-08-08 14:56:13 -07:00

host_command.c

host_command: Count suppressed host commands individually

2018-02-16 21:41:41 -08:00

host_event_commands.c

host_events: Introduce unified host event command

2017-12-06 03:45:57 -08:00

i2c_master.c

i2c: expose port num during unwedge console output.

2018-03-26 23:33:38 -07:00

i2c_slave.c

i2c: separate slave and master code

2017-04-26 13:37:04 -07:00

i2c_wedge.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

i2cs_tpm.c

tpm: provide means of shutting down comms layer while in reset

2017-11-07 17:52:15 -08:00

inductive_charging.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

keyboard_8042_sharedlib.c

keyboard_8042: Allow scancode sets to be mutable

2017-05-18 18:07:29 -07:00

keyboard_8042.c

console: Fix help for parse_bool

2018-03-16 20:55:35 -07:00

keyboard_mkbp.c

host_events: Bump up host events and masks to 64-bit

2017-11-21 18:53:35 -08:00

keyboard_scan.c

keyboard_scan: Disable when USB is suspended without wake

2018-02-05 19:08:21 -08:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

cleanup: Remove 'ryu' board

2017-09-11 11:14:24 -07:00

led_common.c

led: Only report auto control for supported LEDs.

2018-01-31 18:01:04 -08:00

led_policy_std.c

chipset: Introduce CHIPSET_STATE_ANY_SUSPEND

2017-11-28 15:44:19 -08:00

led_pwm.c

led_pwm: Add a few more features to the ledtest command

2018-02-15 21:43:53 -08:00

lid_angle.c

oak: enable lid angle update

2016-03-02 13:39:47 -08:00

lid_switch.c

whiskers: Disable keyboard/USB interface when magnet sensor active

2018-02-08 06:57:51 -08:00

lightbar.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

mag_cal.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

main.c

Fizz: Execute PMIC reset before vboot_main

2018-02-08 12:58:20 -08:00

mat33.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.c

math_util: Use HW instruction for int_sqrtf when available

2017-06-19 15:33:09 -07:00

memory_commands.c

Add more CONFIG_CMD_* options for console commands

2016-10-01 00:02:01 -07:00

mkbp_event.c

power: Allow host to request higher-power wakeable S3

2017-07-28 15:04:24 -07:00

motion_lid.c

motion_lid: Increase precision in noisy mag check.

2017-07-13 08:32:58 -07:00

motion_sense.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

nvcounter.c

Add non-volatile flash counter

2017-06-02 10:38:57 -07:00

nvmem_vars.c

cr50: Store console lock state in NvMem vars.

2017-02-27 18:50:12 -08:00

nvmem.c

cr50: Make sure TPM wipe only clears TPM data.

2017-02-23 01:19:07 -08:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

panic: Set EC_HOST_EVENT_PANIC on chipset reset

2017-11-30 11:48:57 -08:00

pd_log.c

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

physical_presence.c

pp: add API to show when press is expected

2018-01-12 03:27:08 -08:00

port80.c

port80: Clean up macros

2017-10-31 13:04:59 -07:00

power_button_x86.c

power button: Wait for charger and battery initialization

2018-03-13 19:00:18 -07:00

power_button.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

printf.c

Add vsnprintf function.

2018-03-20 19:30:06 -07:00

pstore_commands.c

pstore: Fix issue with block calculation for pstore blocks

2017-01-03 15:13:58 -08:00

pwm_kblight.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pwm.c

pwm: PWM is disabled when duty is set to max value

2016-09-08 17:57:51 -07:00

queue_policies.c

consumer: Remove flush operation

2017-12-18 20:32:58 -08:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rma_auth.c

cr50: fix console command RMA authentication code check

2018-03-02 13:25:12 -08:00

rollback.c

rollback: Add function to fetch secret

2017-06-14 01:19:31 -07:00

rsa.c

common/rsa: Add support for exponent 3 RSA keys

2016-11-10 21:28:28 -08:00

rtc.c

rtc: Add functions and tests for time conversion

2017-09-26 18:24:07 -07:00

rwsig.c

Fix inconsistent task function declarations

2017-08-08 14:56:13 -07:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

common/sha256: agressive SHA-256 unrolling as an option

2017-09-11 04:42:59 -07:00

shared_mem.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

shmalloc.c

fix shmem console command

2018-03-01 12:39:05 -08:00

smbus.c

smbus: Re-write smbus driver

2016-03-21 16:35:33 -07:00

spi_commands.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

spi_flash_reg.c

ec_flash: Add W25Q128 SPI flash

2017-12-28 14:50:32 -08:00

spi_flash.c

Enable spi_flash_read to read > SPI_FLASH_MAX_READ_SIZE

2016-10-05 20:58:37 -07:00

spi_nor.c

common/spi_nor: Differential erase support

2017-02-09 05:04:56 +00:00

switch.c

Allow lid-less configuration

2017-05-09 23:20:07 -07:00

system.c

system: Log PC and task id on watchdog

2017-12-11 15:16:23 -08:00

tablet_mode.c

motion: Disable tablet mode if one accel is broken

2017-01-04 18:07:12 -08:00

temp_sensor.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

test_util.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

thermal.c

Fizz: Modify thermal table

2017-11-06 13:48:38 -08:00

throttle_ap.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

timer.c

Allow repeated waitms commands without resetting

2018-03-08 19:28:50 -08:00

tpm_log.c

tpm: Add optional event logging

2017-08-10 22:47:24 -07:00

tpm_registers.c

tpm: ccd: allow alternative commands when ap is held in reset

2018-02-15 21:43:57 -08:00

u2f.c

g: use deterministic k for individual attestation certificate ECDSA

2017-08-03 19:23:22 -07:00

uart_buffering.c

uart: fix compile warning when !defined CONFIG_CONSOLE_ENABLE_READ_V1

2017-05-12 13:09:54 -07:00

update_fw.c

update_fw: Store complete touchpad FW hash

2017-09-15 10:50:27 -07:00

usb_charger.c

Introduce CONFIG_USB_PD_5V_CHARGER_CTRL

2018-03-05 00:21:22 -08:00

usb_i2c.c

consumer: Remove flush operation

2017-12-18 20:32:58 -08:00

usb_pd_policy.c

usb pd: Adding PPC vbus discharge path

2018-01-31 11:14:01 -08:00

usb_pd_protocol.c

ppc: Add driver for NX20P3483

2018-03-20 19:30:17 -07:00

usb_pd_tcpc.c

PD: Make current USB PD Stack REV 3 compliant

2017-10-24 15:30:15 -07:00

usb_port_power_dumb.c

usb_port_power: Allow variable number of ports

2017-05-01 21:54:10 -07:00

usb_port_power_smart.c

usb_port_power_smart: Add CDP/SDP only option.

2017-08-28 15:24:10 -07:00

usb_update.c

consumer: Remove flush operation

2017-12-18 20:32:58 -08:00

usbc_ppc.c

ppc: Add driver for NX20P3483

2018-03-20 19:30:17 -07:00

util.c

host_events: Bump up host events and masks to 64-bit

2017-11-21 18:53:35 -08:00

vboot_hash.c

vboot: Add error message in hash command

2017-09-29 23:25:38 -07:00

vec3.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.c

common/rollback: Add support for rollback protection

2017-04-06 03:29:38 -07:00

virtual_battery.c

virtual_battery: Avoid unexpected batt_mode_cache refreshing

2017-09-25 21:06:52 -07:00

vstore.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

webusb_desc.c

Add WebUSB descriptor support

2017-09-22 10:18:50 -07:00

wireless.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00