mirror of
https://github.com/Telecominfraproject/OpenCellular.git
synced 2026-01-04 22:11:41 +00:00
3a4298ef48
This patch sets/clears RESET_FLAG_AP_OFF on S5<->S3 transitions.
It's set when the system gracefully shuts down and cleared when the
system boots up. The result is EC tries to go back to the
previous state upon AC plug-in on battery-less systems.
This is required for digital signage and kiosk.
This also reverts: CL 514209, 486946, and 486945.
BUG=b:37536389
BRANCH=none
TEST=Tested as follows:
A. Boot to S0
A.1. Unplug AC while system is in S0 then plug in - PASS
A.2. Unplug AC while system is in S3 then plug in - PASS
A.3. Press recovery+power in S0 - PASS
A.4. Press recovery+power in G3 - FAIL (To be fixed)
A.5. Execute reboot console command - PASS
A.6. Execute reboot OS command - PASS
A.7. Execute reboot console command in G3 - PASS
B. Boot to G3
B.1 Unplug AC while system is in G3 then plug in - PASS
B.2 Unplug AC after B.1 then plug in - PASS
B.3 Shutdown by power button on recovery screen then unplug
plug in AC - PASS
B.4 Execute reboot ap-off console command - PASS
B.5 Execute shutdown command from OS then plug in AC - PASS
Change-Id: Iaa6f930585050fdd3511c711b449dff47525066d
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/517287
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For an overview of the Embedded Controller firmware, refer to http://www.chromium.org/chromium-os/2014-firmware-summit For instructions on building from source, refer to http://www.chromium.org/chromium-os/ec-development/getting-started-building-ec-images-quickly