Daisuke Nojiri 591eec2cd2 Snappy: Recondition USB3.0 RX ...

The loss between PS8751 and Type-C connector is large and requires
a larger EQ and low squelch threshold for compensation.

- USB Type-c connector facing receiver equalization setting:
	Compensate for channel loss up to 10.9dB
- High Speed Signal Detector threshold adjustment: -25%

BUG=chrome-os-partner:61101
BRANCH=none
TEST=Boot & charge

Change-Id: Ie74e2d0b8ad7206f5e60fb013613c382980c0eac
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/433846
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2017-02-09 12:47:41 -08:00

..

battery

cleanup: Remove charge_state_v1

2017-02-06 14:50:32 -08:00

charger

charge_ramp: Specify port number in board_is_vbus_too_low()

2017-02-02 19:09:52 -08:00

led

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

tcpm

Snappy: Recondition USB3.0 RX

2017-02-09 12:47:41 -08:00

temp_sensor

driver: temp_sensor: Add support for TI TMP112 sensor

2016-12-30 18:14:34 -08:00

accel_bma2x2.c

driver: Add support bma255 sensor

2016-05-31 14:14:44 -07:00

accel_bma2x2.h

driver: bma2x2/kionix remove unused fields

2016-10-28 21:06:51 -07:00

accel_kionix.c

kionix: Add reading whoami to be sure device has booted.

2016-10-08 18:34:36 -07:00

accel_kionix.h

driver: bma2x2/kionix remove unused fields

2016-10-28 21:06:51 -07:00

accel_kx022.h

i2c: Add i2ctest console command

2016-09-23 15:10:08 -07:00

accel_kxcj9.h

i2c: Add i2ctest console command

2016-09-23 15:10:08 -07:00

accel_lis2dh.c

driver: accel: Add acc driver basics and FIFO for LIS2DH/LIS2DH12

2017-02-09 03:10:22 -08:00

accel_lis2dh.h

driver: accel: Add acc driver basics and FIFO for LIS2DH/LIS2DH12

2017-02-09 03:10:22 -08:00

accelgyro_bmi160.c

driver: bmi160: Set odr to 0 at init.

2017-01-10 21:34:32 -08:00

accelgyro_bmi160.h

driver: bmi160: Add temperature sensor

2016-12-12 18:34:34 -08:00

accelgyro_lsm6ds0.c

driver: sensor: Remove set_interrupt

2016-11-08 17:12:18 -08:00

accelgyro_lsm6ds0.h

motion_sense: Add more complex EC/AP sensor rate support.

2015-08-29 01:34:14 -07:00

accelgyro_lsm6dsm.c

driver: Move sensor private struture definition to boards.

2016-12-28 21:49:29 -08:00

accelgyro_lsm6dsm.h

accel: add accel driver for LSM6DSM

2016-11-15 07:04:30 -08:00

als_al3010.c

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_al3010.h

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_isl29035.c

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_isl29035.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_opt3001.c

i2c: Add i2ctest console command

2016-09-23 15:10:08 -07:00

als_opt3001.h

i2c: Add i2ctest console command

2016-09-23 15:10:08 -07:00

als_si114x.c

driver: als: Add error code UNCHANGED

2017-01-05 13:43:39 -08:00

als_si114x.h

driver: si114x: Unlock the device if stuck

2015-12-01 03:46:34 -08:00

baro_bmp280.c

driver: Move sensor private struture definition to boards.

2016-12-28 21:49:29 -08:00

baro_bmp280.h

i2c: Add i2ctest console command

2016-09-23 15:10:08 -07:00

build.mk

driver: accel: Add acc driver basics and FIFO for LIS2DH/LIS2DH12

2017-02-09 03:10:22 -08:00

gyro_l3gd20h.c

driver: sensor: Remove set_interrupt

2016-11-08 17:12:18 -08:00

gyro_l3gd20h.h

driver: Add L3GD20H gyrometer basic driver support

2015-10-20 15:02:49 -07:00

ina2xx.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ina2xx.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

mag_bmm150.c

driver: bmi160: Remove unnecessary delay

2016-11-21 18:22:56 -08:00

mag_bmm150.h

driver: bmm150: Use Bosch recommend repetition

2015-10-15 18:08:25 -07:00

mcdp28x0.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

mcdp28x0.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb9281.h

usb_charger: Move part-specific code to usb_switch driver

2016-05-13 23:34:51 -07:00

pi3usb30532.h

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

pmic_tps650830.h

Kunimitsu: Fix VRMODECTRL for PMIC VCCIO control

2015-09-29 13:07:08 -07:00

pmu_tps65090_charger.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

pmu_tps65090_powerinfo.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pmu_tps65090.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ps8740.h

ps8740: Add a function to tune USB EQ settings

2015-11-24 11:02:49 -08:00

regulator_ir357x.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

stm_mems_common.c

driver: accel: Add acc driver basics and FIFO for LIS2DH/LIS2DH12

2017-02-09 03:10:22 -08:00

stm_mems_common.h

driver: accel: Add acc driver basics and FIFO for LIS2DH/LIS2DH12

2017-02-09 03:10:22 -08:00

touchpad_elan.c

driver/touchpad_elan: Report events to USB HID touchpad

2016-11-22 18:36:39 -08:00

touchpad_elan.h

driver/touchpad_elan: Basic elan touchpad driver

2016-11-08 23:24:52 -08:00

usb_mux_pi3usb30532.c

cleanup: Fix gcc 5.2.1 compile errors

2015-11-11 11:00:56 -08:00

usb_mux_ps8740.c

ps8740: Add a function to tune USB EQ settings

2015-11-24 11:02:49 -08:00

usb_mux_virtual.c

kevin / gru: Notify host of HPD IRQ status

2016-08-10 20:07:32 -07:00

usb_mux.c

usb_mux: Correct an error print.

2016-08-24 17:40:52 -07:00

usb_switch_pi3usb9281.c

pi2usb9281: Prevent race condition in RMW control register

2016-09-23 12:22:13 -07:00