mirror of
https://github.com/Telecominfraproject/OpenCellular.git
synced 2025-12-28 10:45:22 +00:00
73e439dc87
Added a warm reboot function that reboots the AP while preserving RAM contents. This will be helpful in debugging AP/OS hard hangs since in conjunction with PSTORE_CONSOLE in the kernel, the kernel log messages from the previous boot will be preserved. BUG=chrome-os-partner:13249 TEST=1. From EC console issue the "warm_reboot" command. Upon rebooting "cat /dev/pstore/console-ramoops" and ensure that the contents are dmesg of previous boot. 2. Reboot the system using alt-volume_up-r key combination. Upon rebooting, check pstore contents in the same manner as case#1 above. BRANCH=snow Change-Id: Ic8f0415da6182f4c1bc2d35b91302ceda5c19569 Signed-off-by: Sameer Nanda <snanda@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/31523 Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
- EC Lib
This wraps Blizzard driverlib and implements the EC chip interface defined
by Google. See below diagram for architecture.
+--------------------+
| Host BIOS/OS |
+--------------------+
---- host interface ----
+--------------------+
| Google EC features |
+--------------------+
---- chip interface ---- The interface is defined in
src/platform/ec/chip_interface/*.
+--------------------+ But the real implementation is in EC Lib.
| EC Lib |
+--------------------+
| Blizzard low level |
| driver, the |
| driverlib. |
+--------------------+
Build Options
=============
- CONFIG_WATCHDOG_HELP
Try to detect a watchdog that is about to fire, and print a trace.
This is needed on STM32, where the independent watchdog has no early
warning feature and the windowed watchdog has a very short period.
- CONFIG_PANIC_NEW_STACK
When reporting a panic, change to a completely new stack. This might
help get a useful trace out a situation where the stack or stack
pointer has been corrupted.
- CONFIG_PANIC_HELP
Report extra information about a panic, such as the fault address,
here shown as bfar. This shows the reason for the fault and may help
to determine the cause.
=== EXCEPTION: 03 ====== xPSR: 01000000 ===========
r0 :0000000b r1 :00000047 r2 :60000000 r3 :200013dd
r4 :00000000 r5 :080053f4 r6 :200013d0 r7 :00000002
r8 :00000000 r9 :200013de r10:00000000 r11:00000000
r12:00000000 sp :200009a0 lr :08002b85 pc :08003a8a
Precise data bus error, Forced hard fault, Vector catch, bfar = 60000000
mmfs = 00008200, shcsr = 00000000, hfsr = 40000000, dfsr = 00000008
- CONFIG_ASSERT_HELP
Report assertion failures in a vebose manner to aid debugging. When
enabled an ASSERT() which fails will produce message in the form:
ASSERTION FAILURE '<expr>' in function() at file:line
- CONFIG_CONFIGURE_BOARD_LATE
Define this to call configure_board_late() after initial system init
is complete (and after GPIOs are set up).
- CONFIG_AC_POWER_STATUS
Monitor the state of the AC power input and drive out a GPIO to
the AP indicating this state. The GPIO will be driven low when
AC power is not connected, and high when it is connected. This
uses GPIO_AC_STATUS for this purpose.