mirror of
https://github.com/Telecominfraproject/OpenCellular.git
synced 2025-12-27 18:25:05 +00:00
88503ab4ec
This adds explicit "int fan" args to the exported functions from common/fan.c: fan_set_percent_needed() and fan_percent_to_rpm(). Within that file, multiple fans are handled independently. This is not complete, though. Host commands and sysjump support still only handle a single fan, so at the moment multiple fans are treated identically in those cases. BUG=chrome-os-partner:23530 BRANCH=none TEST=manual All boards build, "make runtests" passes. On a multi-fan system, the EC command "faninfo" displays multiple results: > faninfo Fan 0 Actual: 0 rpm Fan 0 Target: 0 rpm Fan 0 Duty: 0% Fan 0 Status: 0 (not spinning) Fan 0 Mode: rpm Fan 0 Auto: yes Fan 0 Enable: yes Fan 1 Actual: 0 rpm Fan 1 Target: 0 rpm Fan 1 Duty: 0% Fan 1 Status: 0 (not spinning) Fan 1 Mode: rpm Fan 1 Auto: no Fan 1 Enable: no > and the "fanduty", "fanset", and "fanauto" all require the fan number as the first arg: > fanduty 0 30 Setting fan 0 duty cycle to 30% > fanset 1 2000 Setting fan 1 rpm target to 2000 > fanauto 0 > fanauto 1 On single-fan systems, there is no visible change. Change-Id: Idb8b818122e157960d56779b2a86e5ba433bee1b Signed-off-by: Bill Richardson <wfrichar@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175368 Reviewed-by: Randall Spangler <rspangler@chromium.org>
In the most general case, the flash layout looks something like this: +---------------------+ | Reserved for EC use | +---------------------+ +---------------------+ | Vblock B | +---------------------+ | RW firmware B | +---------------------+ +---------------------+ | Vblock A | +---------------------+ | RW firmware A | +---------------------+ +---------------------+ | FMAP | +---------------------+ | Public root key | +---------------------+ | Read-only firmware | +---------------------+ BIOS firmware (and kernel) put the vblock info at the start of each image where it's easy to find. The Blizzard EC expects the firmware vector table to come first, so we have to put the vblock at the end. This means we have to know where to look for it, but that's built into the FMAP and the RO firmware anyway, so that's not an issue. The RO firmware doesn't need a vblock of course, but it does need some reserved space for vboot-related things. Using SHA256/RSA4096, the vblock is 2468 bytes (0x9a4), while the public root key is 1064 bytes (0x428) and the current FMAP is 644 bytes (0x284). If we reserve 4K at the top of each FW image, that should give us plenty of room for vboot-related stuff.