mirror of
https://github.com/Telecominfraproject/OpenCellular.git
synced 2026-01-02 13:14:51 +00:00
92ceccbc4b
Match the configuration on Snow : - set overcurrent timeout to 3200us (max) (to avoid triggering the protection on initial inrush current) - properly enable the auto-discharge feature (we need it when the LDOs are turned OFF) Signed-off-by: Vincent Palatin <vpalatin@chromium.org> BRANCH=none BUG=chrome-os-partner:17790 chrome-os-partner:17804 TEST=on Spring, boot and dump the TPS65090 configuration from the EC command line by using "pmu" command. See 0x1f in registers 0x0f and 0x14 for LCD and Backlight LDOs. Change-Id: I20b0cb11d7abb890e921816e75e8ed816ca4f2d4 Reviewed-on: https://gerrit.chromium.org/gerrit/43180 Tested-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Todd Broch <tbroch@chromium.org> Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
- EC Lib
This wraps Blizzard driverlib and implements the EC chip interface defined
by Google. See below diagram for architecture.
+--------------------+
| Host BIOS/OS |
+--------------------+
---- host interface ----
+--------------------+
| Google EC features |
+--------------------+
---- chip interface ---- The interface is defined in
src/platform/ec/chip_interface/*.
+--------------------+ But the real implementation is in EC Lib.
| EC Lib |
+--------------------+
| Blizzard low level |
| driver, the |
| driverlib. |
+--------------------+
Build Options
=============
- CONFIG_WATCHDOG_HELP
Try to detect a watchdog that is about to fire, and print a trace.
This is needed on STM32, where the independent watchdog has no early
warning feature and the windowed watchdog has a very short period.
- CONFIG_PANIC_HELP
Report extra information about a panic, such as the fault address,
here shown as bfar. This shows the reason for the fault and may help
to determine the cause.
=== EXCEPTION: 03 ====== xPSR: 01000000 ===========
r0 :0000000b r1 :00000047 r2 :60000000 r3 :200013dd
r4 :00000000 r5 :080053f4 r6 :200013d0 r7 :00000002
r8 :00000000 r9 :200013de r10:00000000 r11:00000000
r12:00000000 sp :200009a0 lr :08002b85 pc :08003a8a
Precise data bus error, Forced hard fault, Vector catch, bfar = 60000000
mmfs = 00008200, shcsr = 00000000, hfsr = 40000000, dfsr = 00000008
- CONFIG_ASSERT_HELP
Report assertion failures in a vebose manner to aid debugging. When
enabled an ASSERT() which fails will produce message in the form:
ASSERTION FAILURE '<expr>' in function() at file:line
- CONFIG_CONFIGURE_BOARD_LATE
Define this to call configure_board_late() after initial system init
is complete (and after GPIOs are set up).
- CONFIG_AC_POWER_STATUS
Monitor the state of the AC power input and drive out a GPIO to
the AP indicating this state. The GPIO will be driven low when
AC power is not connected, and high when it is connected. This
uses GPIO_AC_STATUS for this purpose.
- CONFIG_PMU_FORCE_FET
Force switching on and off the FETs on the PMU controlling various
power rails during AP startup and shutdown sequences.
This is mainly useful for bringup when we don't have the corresponding
sequences in the AP code.
- CONFIG_KEYBOARD_TEST
Turn on keyboard testing functionality. This enables a message which
received a list of keyscan events from the AP and processes them.
This will cause keypresses to appear on the AP through the same
mechanism as a normal keyboard press.