Bill Richardson 9a59b5ea9c g: Remove unused CONFIG_RBOX_DEBUG feature ...

This feature is not enabled, is awkwardly written, and shouldn't
be left lying around to use as a bad example. This CL doesn't
change any compiled code.

A followup CL will add a working RBOX interrupt handler.

BUG=none
BRANCH=none
TEST=make buildall; test on Cr50 hardware

Change-Id: I5d0701f55ab9521bf1f29e7ec18994c4401d68fb
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/373600
Tested-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>

2016-08-22 14:52:26 -07:00

..

dcrypto

CR50: when testing an RSA key, check that N % p == 0

2016-07-21 17:32:25 -07:00

loader

Cr50: Rearrange flash to allow dual RO images

2016-07-22 15:36:14 -07:00

blob.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

build.mk

g: Remove unused GC_REVISION compile-time constant

2016-07-24 23:11:30 -07:00

clock.c

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

config_chip.h

cr50: fix nvmem calculations

2016-08-08 20:19:44 -07:00

flash_config.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash_info.h

CR50: add endorsement certificate flow

2016-07-23 02:18:49 +00:00

flash.c

CR50: add endorsement certificate flow

2016-07-23 02:18:49 +00:00

gpio.c

g: add wake pin info to pinmux command

2016-07-28 20:20:42 -07:00

hw_regdefs.h

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

hwtimer.c

Timer initialization & conversion bug fixes

2016-05-28 01:45:31 +00:00

i2cs.c

g: i2c slave driver

2016-04-27 18:12:25 -07:00

i2cs.h

g: i2c slave driver

2016-04-27 18:12:25 -07:00

idle.c

cr50: delay sleep for 3 minutes after resuming from sleep or after init

2016-08-14 02:03:21 -07:00

init_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

jitter.c

cr50: TEMP: to be researched and removed

2016-06-29 22:10:51 +00:00

jtag.c

Release EC_RST_L in RW after all initialization has completed

2016-08-13 17:31:34 -07:00

pmu.c

cr50: code modifications to support FPGA B1

2015-08-11 02:58:45 +00:00

pmu.h

Cr50: Fixed soft resets on silicon.

2016-02-01 21:17:22 +00:00

polling_uart.c

cr50: add polling uart implementation

2015-08-11 02:58:39 +00:00

rbox.c

g: Remove unused CONFIG_RBOX_DEBUG feature

2016-08-22 14:52:26 -07:00

rdd.c

g: fix rdd sleep

2016-08-08 15:21:49 +00:00

rdd.h

g: disable usb wakeup when debug accessory is disconnected

2016-07-19 16:32:10 -07:00

registers.h

cr50: fix wake pin handling when resuming from sleep

2016-07-28 20:19:51 -07:00

signed_header.h

Modified the bootloader to check PMU_PWRDN_SCRATCH30 and load the newer

2016-01-28 20:58:32 +00:00

spi_master.c

g: tristate spi master pins

2016-07-14 23:34:38 -07:00

spi_master.h

Cr50: Export the chip-specific SPI master functions

2016-05-31 22:16:42 +00:00

sps_tpm.c

g: Remove obsolete spstpm command

2016-08-22 14:52:14 -07:00

sps.c

Cr50: Sample slave configuration pins at POR

2016-08-03 19:40:55 -07:00

sps.h

cr50: sps: allow receive registration function set FIFO threshold

2015-08-13 23:34:05 +00:00

system.c

g: report RW header version along with code revision

2016-08-19 14:21:23 -07:00

trng.c

cr50: trng: handle (unlikely) TRNG timeout

2016-03-14 20:11:30 -07:00

uart.c

g: disable uart 1 and 2 during init

2016-07-13 19:09:19 -07:00

uartn.c

g: add an option to disable uart0 rx no matter what

2016-07-20 22:22:09 -07:00

uartn.h

cr50: disable UART peripheral when the device is powered off.

2016-05-27 18:08:51 -07:00

upgrade_fw.c

g: usb_updater: clean up update protocol handling

2016-08-21 04:10:33 -07:00

upgrade_fw.h

usb_updater: host side support protocol version 3

2016-08-21 04:10:38 -07:00

usart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usart.h

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usb_console.c

g: increase usb console TX buffer size to 4K

2016-08-01 13:45:00 -07:00

usb_endpoints.S

cr50: add USB support

2015-04-02 20:27:46 +00:00

usb_hid.c

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_hw.h

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_spi.c

g: implement EC/AP flash access via CCD

2016-06-03 20:14:58 -07:00

usb_spi.h

cr50: fix usb spi to disable resets while doing updates

2016-07-28 20:20:51 -07:00

usb_upgrade.c

usb_updater: host side support protocol version 3

2016-08-21 04:10:38 -07:00

usb-stream.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

usb-stream.h

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb.c

servo_v4: servo_micro: cr50: fix usb power declaration

2016-08-08 18:22:30 -07:00

watchdog.c

g: Always reboot on watchdog or lockup

2016-08-03 19:40:48 -07:00