nagendra modadugu b6a48a5895 CR50: when generating primes, check compatibility with exp ...

Primes generated for RSA keys need to hold the following
property (public_exponent mod p) > 1 in order for the
private exponent to exist.  This change adds this check
for the public exponent RSA_F4 (65537).

BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
BUG=chrome-os-partner:50115,chrome-os-partner:55260
TEST=test full personalize + cros_ack verify cert flow

Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360662
Reviewed-by: Marius Schilder <mschilder@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@google.com>
(cherry picked from commit 1c37f84ae7fae9f5841421447c7f235790ab6a93)
(cherry picked from commit b2c1678b27c79a2c93f5519e00161243fa0a5d88)
Change-Id: I87bd898cc3750bf1e492bc263edb6eac1edf2a17
Reviewed-on: https://chromium-review.googlesource.com/362115
Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>

2016-07-21 17:32:17 -07:00

..

dcrypto

CR50: when generating primes, check compatibility with exp

2016-07-21 17:32:17 -07:00

loader

CR50: refactor debug_printf() for use as a library function

2016-06-15 15:29:14 -07:00

blob.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

build.mk

CR50: refactor debug_printf() for use as a library function

2016-06-15 15:29:14 -07:00

clock.c

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

config_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

flash_config.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash_info.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash.c

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

gpio.c

Cr50: Add DIO_PULL_UP and DIO_PULL_DOWN flags

2016-04-15 21:29:25 -07:00

hw_regdefs.h

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

hwtimer.c

Timer initialization & conversion bug fixes

2016-05-28 01:45:31 +00:00

i2cs.c

g: i2c slave driver

2016-04-27 18:12:25 -07:00

i2cs.h

g: i2c slave driver

2016-04-27 18:12:25 -07:00

idle.c

g: disable usb wakeup when debug accessory is disconnected

2016-07-19 16:32:10 -07:00

init_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

jitter.c

cr50: TEMP: to be researched and removed

2016-06-29 22:10:51 +00:00

jtag.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

pmu.c

cr50: code modifications to support FPGA B1

2015-08-11 02:58:45 +00:00

pmu.h

Cr50: Fixed soft resets on silicon.

2016-02-01 21:17:22 +00:00

polling_uart.c

cr50: add polling uart implementation

2015-08-11 02:58:39 +00:00

rbox.c

cr50: init rbox before the board init is invoked

2016-07-06 12:45:50 -07:00

rbox.h

g: remove the fuse override in rbox

2016-06-16 16:07:20 -07:00

rdd.c

g: initialize rdd based on current cc readings

2016-07-19 16:32:07 -07:00

rdd.h

g: disable usb wakeup when debug accessory is disconnected

2016-07-19 16:32:10 -07:00

registers.h

g: Add GR_KEYMGR_HKEY_FRR to registers.h

2016-05-16 11:52:34 -07:00

signed_header.h

Modified the bootloader to check PMU_PWRDN_SCRATCH30 and load the newer

2016-01-28 20:58:32 +00:00

spi_master.c

g: tristate spi master pins

2016-07-14 23:34:38 -07:00

spi_master.h

Cr50: Export the chip-specific SPI master functions

2016-05-31 22:16:42 +00:00

sps_tpm.c

Cr50: Sleep only when SPS has been quiet for a while

2016-04-03 10:27:39 -07:00

sps.c

Cr50: Specify pinmux wake sources in gpio.inc

2016-04-05 16:54:03 +00:00

sps.h

cr50: sps: allow receive registration function set FIFO threshold

2015-08-13 23:34:05 +00:00

system.c

Cr50: Include low-power exit triggers in reset causes

2016-03-30 20:38:13 -07:00

trng.c

cr50: trng: handle (unlikely) TRNG timeout

2016-03-14 20:11:30 -07:00

uart.c

g: disable uart 1 and 2 during init

2016-07-13 19:09:19 -07:00

uartn.c

g: add an option to disable uart0 rx no matter what

2016-07-20 22:22:09 -07:00

uartn.h

cr50: disable UART peripheral when the device is powered off.

2016-05-27 18:08:51 -07:00

upgrade_fw.c

cr50: TEMP: to be researched and removed

2016-06-29 22:10:51 +00:00

upgrade_fw.h

Cr50: Update the USB VID:PID:subclass constants

2016-04-15 15:09:08 -07:00

usart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usart.h

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usb_console.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb_endpoints.S

cr50: add USB support

2015-04-02 20:27:46 +00:00

usb_hid.c

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_hw.h

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_spi.c

g: implement EC/AP flash access via CCD

2016-06-03 20:14:58 -07:00

usb_spi.h

cr50: generate HARD RESET when sys_reset is asserted

2016-07-01 18:03:40 -07:00

usb_upgrade.c

g: enhance upgrade protocol to allow upgrade block restarts

2016-05-02 17:35:46 -07:00

usb-stream.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

usb-stream.h

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb.c

g: Enable SOF calibration after first SOF token

2016-06-08 14:02:22 -07:00

watchdog.c

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00