Nicolas Boichat 51b6222520 npcx/uart: Pull up communication line during transaction ...

Boards needs to define GPIO_EC_COMM_PU, which needs to be driven
high during EC-EC transaction. This makes sure that the line does
not go low, even when the base goes away during the transaction.

BRANCH=none
BUG=b:68954760
TEST=EC-EC communication works with this change.
TEST=With signal analyzer, check that UART line is always kept
     high while transaction is in progress.

Change-Id: Iad7b26a9a93b674aa4fff0bc3a72a13e6782515d
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/845544
Reviewed-by: Randall Spangler <rspangler@chromium.org>

2018-01-04 21:52:01 -08:00

..

g

g: fix flaky timeout check for spi transfer.

2018-01-04 14:35:21 -08:00

host

Mark reset and panic functions as noreturn

2017-11-07 15:25:17 -08:00

ish

ish i2c: use i2c_ports[] to set bus speed

2017-12-13 00:32:23 -08:00

it83xx

it83xx: espi: workaround for changing PLL

2017-12-12 22:00:36 -08:00

lm4

host_events: Bump up host events and masks to 64-bit

2017-11-21 18:53:35 -08:00

mchp

ec_chip_mchp: Add I2C controller

2018-01-02 15:48:23 -08:00

mec1322

system: Allow hibernate to clear AP_OFF flag

2017-12-05 18:00:38 -08:00

npcx

npcx/uart: Pull up communication line during transaction

2018-01-04 21:52:01 -08:00

nrf51

cleanup: Remove jtag_pre_init()

2017-09-07 15:01:05 -07:00

stm32

stm32: re-factor registers.h addresses

2017-12-25 17:17:26 -08:00