Vic Yang 9de97e8754 charge_state_v2: Do not draw max input current if battery is present ...

Currently we set the input current limit to its maximum when the system
is unlocked, so that we can boot the system with a powerful charger when
the battery is absent. However, with a low power charger, we risk
browning out the charger. If the battery is present, reduce the input
current limit so that low power chargers work in this case.

BRANCH=None
BUG=None
TEST=On Ryu, reboot EC when the a low power charger is used. Without
this change, the charger browns out right after the reboot. With this
fix, the problem doesn't happen anymore.

Change-Id: I9d491cbe45e77f864198c97a47624918e6c272db
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/248442
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>

2015-02-20 19:37:16 +00:00

..

acpi.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

adc.c

Move ADC console command to common

2013-12-20 05:07:58 +00:00

als.c

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

build.mk

charge_ramp: initial commit of charge ramp module

2015-02-18 04:53:22 +00:00

button.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

case_closed_debug.c

CCD: Remove CCD specific board connect and disconnect

2015-02-10 23:07:16 +00:00

charge_manager.c

charge_manager: Assume all chargers are dedicated when in locked RO

2015-02-18 04:53:38 +00:00

charge_ramp.c

charge_ramp: initial commit of charge ramp module

2015-02-18 04:53:22 +00:00

charge_state_v1.c

charger: Make critical battery shutdown timeout a config option

2015-01-15 05:13:14 +00:00

charge_state_v2.c

charge_state_v2: Do not draw max input current if battery is present

2015-02-20 19:37:16 +00:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Move CLZ emulation to common code

2014-03-06 21:32:57 +00:00

console_output.c

Samus: Split motion sense and lid angle

2014-10-29 22:23:54 +00:00

console.c

Only process console input after console task started

2015-01-17 23:19:58 +00:00

crc8.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

eoption.c

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

extpower_falco.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

extpower_gpio.c

Initialize extpower module prior to modules with default priority

2014-03-29 02:14:26 +00:00

extpower_snow.c

Remove bolt, daisy, kirby, puppy, slippy boards

2013-11-21 22:21:56 +00:00

extpower_spring.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

fan.c

samus: Only update fan speeds every N seconds

2015-02-18 04:53:30 +00:00

firmware_image.lds.S

Remove extra EAh at end of RW image.

2014-12-05 00:02:06 +00:00

firmware_image.S

ryu_sh_loader: Add board directory for load image

2014-12-15 22:46:21 +00:00

flash.c

Support vboot hash and system version if flash isn't memory-mapped

2015-02-05 21:03:01 +00:00

fmap.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

gesture.c

gesture: add absolute threshold for start of tap for battery

2014-12-30 22:04:11 +00:00

gpio.c

cleanup: Don't admit the existence of unimplemented gpios

2015-02-20 02:59:52 +00:00

hooks.c

hooks: add hook for battery state of charge change

2015-02-03 05:39:18 +00:00

host_command_master.c

pd: Add timeout for HC flash commands.

2015-01-07 08:45:38 +00:00

host_command_pd.c

samus: panic reboot EC if PD MCU crashes

2015-02-18 04:53:59 +00:00

host_command.c

Support command versioning of new host command range

2015-01-06 02:33:04 +00:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_arbitration.c

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

samus: disable i2cscan console command to save space

2015-02-18 04:52:56 +00:00

in_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

inductive_charging.c

ryu: improve inductive charging control

2015-01-30 05:11:06 +00:00

keyboard_8042.c

nuc: Add all IC specific drivers of NPCX5M5G

2015-01-14 03:16:10 +00:00

keyboard_mkbp.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

keyboard_scan.c

samus: change charge override hot keys to ctrl+search+0|1|2

2015-01-24 06:42:02 +00:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: switch default firmware to use STM32F373

2014-11-12 23:08:12 +00:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

Standard Power/Charging LED Behavior

2015-01-14 21:49:36 +00:00

lid_angle.c

Convert motion sense calculations to fixed point.

2015-02-05 19:41:41 +00:00

lid_switch.c

lid_switch: Support forced lid open

2014-11-18 01:05:49 +00:00

lightbar.c

samus: fix lightbar tap sequence doesn't always show on AC event

2015-02-04 23:32:37 +00:00

main.c

Add RW firmware signature verification for common runtime

2014-12-01 20:30:46 +00:00

math_util.c

Convert motion sense calculations to fixed point.

2015-02-05 19:41:41 +00:00

memory_commands.c

cleanup: Poke the watchdog when dumping lots of memory

2015-02-20 00:07:08 +00:00

mkbp_event.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

motion_lid.c

Convert motion sense calculations to fixed point.

2015-02-05 19:41:41 +00:00

motion_sense.c

Convert motion sense calculations to fixed point.

2015-02-05 19:41:41 +00:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

out_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

panic_output.c

panic: fix logging of watchdog in panic data

2015-02-20 00:07:01 +00:00

pd_log.c

pd_log: Add command to request PD MCU to write a log

2015-02-12 23:08:45 +00:00

pmu_tps65090_charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

pmu_tps65090_powerinfo.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

pmu_tps65090.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

port80.c

CHROMIUM: ec: Add Port 80 history access from ectools

2014-05-07 03:41:27 +00:00

power_button_x86.c

power_button_x86: Don't inhibit power button in S0

2015-01-29 06:48:45 +00:00

power_button.c

Power Button: Wait for power button to be stable when waiting for release

2015-02-10 23:07:14 +00:00

printf.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

pwm.c

Move source files to driver/ and power/ subdirs

2013-10-23 20:07:25 +00:00

queue.c

Queue: Add methods that accept a memcpy routine

2015-01-08 00:38:13 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

pd: log important events for accessories

2015-01-15 01:07:14 +00:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smbus.c

smbus: Don't use shared memory buffer for word writes

2015-02-04 23:32:42 +00:00

spi_flash.c

Fix errors discovered by new compiler.

2014-11-21 02:44:47 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

panic: fix logging of watchdog in panic data

2015-02-20 00:07:01 +00:00

temp_sensor.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

test_util.c

emulator: Keep fail count across sysjump

2014-01-08 03:49:36 +00:00

thermal.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

common: Add a forcetime console command

2015-01-14 03:16:29 +00:00

uart_buffering.c

Make Ctrl-S and Ctrl-Q match the rest of the world

2014-06-04 21:01:43 +00:00

usb_pd_policy.c

pd: Allow multiple mode entry.

2015-01-28 11:13:58 +00:00

usb_pd_protocol.c

pd: charge_manager: make new VBUS charge supplier

2015-02-18 04:53:12 +00:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

Support inverted ILIM_SEL for smart USB port power

2014-08-23 02:42:21 +00:00

util.c

Queue: Add methods that accept a memcpy routine

2015-01-08 00:38:13 +00:00

vboot_hash.c

Support vboot hash and system version if flash isn't memory-mapped

2015-02-05 21:03:01 +00:00

version.c

USB: Remove special case for iVersion string descriptor

2014-11-04 21:34:39 +00:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00