Aseda Aboagye eff4baf03f sn5s330: Add support for Vbus detection. ...

The SN5S330 has support for detecting when Vbus is present on a port.
This commit simply adds an API to query the PPC.

BUG=None
BRANCH=None
TEST=`make -j buildall`.
TEST=Flash a board with the SN5S330, with some extra code, verify that
Vbus can be detected with this API.

Change-Id: I45bf7ff24bcdc447efe12932f51f8094108e29d5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/791502
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>

2017-12-06 17:30:46 -08:00

..

battery

sb_fw_update: Get rid of CONFIG_SB_FIRMWARE_UPDATE

2017-11-28 17:56:29 -08:00

bc12

grunt: Initial USB PD board code.

2017-11-30 14:18:40 -08:00

charger

charger: add sy21612 buck-boost converter driver

2017-11-29 04:04:12 -08:00

led

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ppc

sn5s330: Add support for Vbus detection.

2017-12-06 17:30:46 -08:00

tcpm

tcpm: fusb302: Wake PD task on VBUS level change

2017-12-04 17:33:54 -08:00

temp_sensor

Fizz: Modify thermal table

2017-11-06 13:48:38 -08:00

accel_bma2x2.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accel_bma2x2.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

accel_kionix.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accel_kionix.h

sensors: add bmi160 & kionix orientation driver

2017-08-08 17:34:11 -07:00

accel_kx022.h

sensors: add bmi160 & kionix orientation driver

2017-08-08 17:34:11 -07:00

accel_kxcj9.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

accel_lis2dh.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accel_lis2dh.h

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accelgyro_bmi160.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accelgyro_bmi160.h

driver: bm160: Fix minimal gyro frequency

2017-09-20 16:37:57 -07:00

accelgyro_lsm6ds0.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accelgyro_lsm6ds0.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

accelgyro_lsm6dsm.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accelgyro_lsm6dsm.h

driver: lsm6dsm/lsm6dsl: Fix LSM6DSM_ODR_TO_NORMALIZE macro

2017-09-20 05:50:22 -07:00

als_al3010.c

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_al3010.h

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_isl29035.c

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_isl29035.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_opt3001.c

OPT3001: Support MOTIONSENSE_CMD_SENSOR_[OFFSET|RANGE] for calibration.

2017-11-26 05:21:39 -08:00

als_opt3001.h

OPT3001: Support MOTIONSENSE_CMD_SENSOR_[OFFSET|RANGE] for calibration.

2017-11-26 05:21:39 -08:00

als_si114x.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

als_si114x.h

driver: sensor: tune MAX_FREQ

2017-07-13 15:08:42 -07:00

baro_bmp280.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

baro_bmp280.h

cleanup: motion_sense: Remove driver data structure externs

2017-06-15 23:54:00 -07:00

build.mk

eve_fp: update fingerprint architecture

2017-12-06 14:28:56 -08:00

gyro_l3gd20h.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

gyro_l3gd20h.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

ina2xx.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ina2xx.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9555.h

driver: Add driver header for PCA9555 I/O port controller

2017-08-07 22:18:49 -07:00

mag_bmm150.c

driver: bmi160: Remove unnecessary delay

2016-11-21 18:22:56 -08:00

mag_bmm150.h

driver: BMM150: Set max frequency based on repetitions setting

2017-10-30 14:03:10 -07:00

mcdp28x0.c

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

mcdp28x0.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb9281.h

usb_charger: Move part-specific code to usb_switch driver

2016-05-13 23:34:51 -07:00

pi3usb30532.h

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

pmic_tps650x30.h

driver: Rename pmic_tps650830 -> pmic_tps650x30.

2017-10-26 20:20:59 -07:00

regulator_ir357x.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

stm_mems_common.c

lis2dh: code cleanup

2017-02-13 21:15:16 -08:00

stm_mems_common.h

lis2dh: code cleanup

2017-02-13 21:15:16 -08:00

touchpad_elan.c

touchpad_elan: Rename task/interrupts functions

2017-11-20 04:53:20 -08:00

usb_mux_it5205.c

driver: add IT5205 mux driver

2017-10-31 21:49:24 -07:00

usb_mux_it5205.h

driver: add IT5205 mux driver

2017-10-31 21:49:24 -07:00

usb_mux_pi3usb30532.c

cleanup: Fix gcc 5.2.1 compile errors

2015-11-11 11:00:56 -08:00

usb_mux_ps874x.c

usb_mux: Merge PS8743 & PS8740 as PS874X

2017-08-11 20:10:23 -07:00

usb_mux_ps874x.h

usb_mux: Merge PS8743 & PS8740 as PS874X

2017-08-11 20:10:23 -07:00

usb_mux_virtual.c

kevin / gru: Notify host of HPD IRQ status

2016-08-10 20:07:32 -07:00

usb_mux.c

usb_mux: Correct an error print.

2016-08-24 17:40:52 -07:00