scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 02:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ac2b30d1e74f4cf2e956db58d13fbaffd61cb3aa
OpenCellular/common
History
Alec Berg 358aeb2877 Revert "pd: samus: ryu: add Vconn support and enable for samus and ryu" 
This reverts commit 61dc089e23.

Samus polarity is wrong on VCONN due to naming mismatch. Will fix in a later CL, but should revert now to avoid problems.

Change-Id: Icabcf2967e92caec94840df7e66a6658c7cde007
Reviewed-on: https://chromium-review.googlesource.com/222717
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2014-10-10 06:54:16 +00:00
..
acpi.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
adc.c
Move ADC console command to common
2013-12-20 05:07:58 +00:00
als.c
samus: move als sampling from hooks to its own task
2014-06-04 21:00:32 +00:00
ap_hang_detect.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
backlight_lid.c
Support backlight control via lid only
2013-09-27 23:07:21 +00:00
battery.c
Add 'at-shutdown' option to batterycutoff host command
2014-06-15 01:45:21 +00:00
build.mk
pd: VDM Alternate mode support.
2014-10-09 20:44:43 +00:00
button.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
capsense.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
charge_state_v1.c
EC: Add smart battery firmware update driver
2014-09-03 22:49:28 +00:00
charge_state_v2.c
Don't hibernate on low battery if hiberante is not supported
2014-10-09 23:29:34 +00:00
charger.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
chipset.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
clz.c
Move CLZ emulation to common code
2014-03-06 21:32:57 +00:00
console_output.c
usb: add support for mass storage (bulk-only)
2014-08-15 17:55:04 +00:00
console.c
usb: add USB console driver
2014-07-17 00:40:23 +00:00
crc8.c
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.c
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
eoption.c
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
extpower_falco.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
extpower_gpio.c
Initialize extpower module prior to modules with default priority
2014-03-29 02:14:26 +00:00
extpower_snow.c
Remove bolt, daisy, kirby, puppy, slippy boards
2013-11-21 22:21:56 +00:00
extpower_spring.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
fan.c
ectool: hostcmd support to set fans auto control individually
2014-10-07 20:58:33 +00:00
firmware_image.lds.S
Move core-specific toolchain configuration to core/ directory
2013-11-07 22:36:05 +00:00
firmware_image.S
Make a top-level config.h file to include sub-configs
2013-07-16 12:06:31 -07:00
flash.c
flash: Fix bad check for flash_is_erased()
2014-07-08 02:14:32 +00:00
fmap.c
cleanup: Remove checkpatch warnings
2013-12-19 00:12:28 +00:00
gpio.c
Added v1 version of ectool gpioget supporting more functions
2014-04-29 03:11:16 +00:00
hooks.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
host_command_master.c
samus: add automatic retries for host commands from EC to PD
2014-09-17 01:24:05 +00:00
host_command_pd.c
samus: exchange status with PD MCU on boot
2014-09-17 01:24:25 +00:00
host_command.c
EC: Add smart battery firmware update driver
2014-09-03 22:49:28 +00:00
host_event_commands.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
i2c_arbitration.c
cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER
2013-10-25 01:32:15 +00:00
i2c_wedge.c
i2c: add wedge command
2014-03-06 21:33:09 +00:00
i2c.c
i2c: allow for mulitple i2c busses to utilize automatic unwedging
2014-09-30 08:32:23 +00:00
in_stream.c
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.c
Add inductive charging control module
2014-08-25 20:52:32 +00:00
keyboard_8042.c
Add demo_tap() function for lightbar demo mode
2014-09-26 09:21:06 +00:00
keyboard_mkbp.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
keyboard_scan.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
keyboard_test.c
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.c
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
led_common.c
rambi: fix led command
2014-01-14 09:19:45 +00:00
lid_angle.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
lid_switch.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
lightbar.c
lightbar: Rename structs and macros for kernel cros_ec_commands
2014-10-09 23:29:42 +00:00
main.c
Add CONFIG_BRINGUP option to help debug signals for bringup
2014-06-05 01:36:44 +00:00
math_util.c
[common]: Remove accelerator calibration code.
2014-09-25 04:09:07 +00:00
memory_commands.c
Use uintptr_t when converting integer from/to pointer
2013-05-07 20:59:53 -07:00
motion_sense.c
samus: support sensor at different power state.
2014-10-08 02:51:17 +00:00
onewire.c
Move onewire bus support from chip/lm4 to common
2013-08-02 18:22:57 -07:00
out_stream.c
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
panic_output.c
ryu: Use brief assertion failure message
2014-10-01 06:53:14 +00:00
pmu_tps65090_charger.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
pmu_tps65090_powerinfo.c
Add battery_get_params()
2013-12-02 22:03:51 +00:00
pmu_tps65090.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
port80.c
CHROMIUM: ec: Add Port 80 history access from ectools
2014-05-07 03:41:27 +00:00
power_button_x86.c
Add CONFIG_BRINGUP option to help debug signals for bringup
2014-06-05 01:36:44 +00:00
power_button.c
power_button: expose raw signal assertion
2014-08-21 08:02:00 +00:00
printf.c
cleanup: Remove checkpatch warnings
2013-12-19 00:12:28 +00:00
pstore_commands.c
Change host command params/response pointers to void *
2012-07-26 16:25:34 -07:00
pwm_kblight.c
Pad jump tags to 4 bytes inside the system module
2013-11-05 02:32:40 +00:00
pwm.c
Move source files to driver/ and power/ subdirs
2013-10-23 20:07:25 +00:00
queue.c
Queue: Add functionality needed by new USART stream driver
2014-09-18 02:59:24 +00:00
rsa.c
add RSA signature verification code
2014-09-30 05:42:15 +00:00
sha1.c
Add SHA-1 hash
2014-05-17 20:14:17 +00:00
sha256.c
cleanup: Remove checkpatch warnings
2013-12-19 00:12:28 +00:00
shared_mem.c
Use uintptr_t when converting integer from/to pointer
2013-05-07 20:59:53 -07:00
smbus.c
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
spi_flash.c
Refactor STM32 SPI flash driver
2014-07-15 09:07:40 +00:00
switch.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
system.c
pd: change pd_soft_reset() to use PD task to send command
2014-09-25 18:15:47 +00:00
temp_sensor.c
cleanup: Rename and move header files
2013-10-23 21:27:40 +00:00
test_util.c
emulator: Keep fail count across sysjump
2014-01-08 03:49:36 +00:00
thermal.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
throttle_ap.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
timer.c
ite: Add initial support for ITE IT8380 chip
2014-01-08 02:24:23 +00:00
uart_buffering.c
Make Ctrl-S and Ctrl-Q match the rest of the world
2014-06-04 21:01:43 +00:00
usb_pd_policy.c
pd: VDM Alternate mode support.
2014-10-09 20:44:43 +00:00
usb_pd_protocol.c
Revert "pd: samus: ryu: add Vconn support and enable for samus and ryu"
2014-10-10 06:54:16 +00:00
usb_port_power_dumb.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
usb_port_power_smart.c
Support inverted ILIM_SEL for smart USB port power
2014-08-23 02:42:21 +00:00
util.c
util: move console command argument parsing to util.c
2014-06-11 00:17:06 +00:00
vboot_hash.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
version.c
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
wireless.c
Allow AP to set wireless power state in suspend
2014-02-22 00:50:37 +00:00