scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-03 05:29:29 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
c268f2eee300bb56adcf8ff942325469a936a5d6
OpenCellular/include
History
Alec Berg 71fb0f9e11 pd: add new state to wait for getSinkCap response 
Add new state to wait for getSinkCap response. We use the READY states
in the PD state machine to indicate that we are not waiting on a response.
This assumption is necessary for VDMs to know whether or not it is ok
to send. This CL fixes a bug in that assumption.

BUG=chrome-os-partner:33861
BRANCH=samus
TEST=load onto zinger. without this change, under the right circumstances
it was possible for a collision between a VDM (response to discover identity)
and an incoming response to the getSinkCap. This would cause the discovery
identity response to get dropped. with this change, when discover identity
response is queued it is delayed until after the getSinkCap response.

Change-Id: I16f4d5272e68bf699d0aecba12bdf6d6b8ff7fc7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238239
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2015-01-03 02:26:42 +00:00
..
accelgyro.h
motion: Add decoding for MOTION_CMD_DUMP v1 command
2014-11-18 05:19:08 +00:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
stm32: implement ADC support for STM32F0xx
2014-03-20 23:51:28 +00:00
als.h
Add ALS driver for light sensors connected to EC
2013-11-07 23:42:56 +00:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
Support backlight control via lid only
2013-09-27 23:07:21 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
battery.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
ryu: Add minimal Case Closed Debug support
2014-11-13 03:14:32 +00:00
charge_manager.h
samus: when battery is full, and not in S0, stop charging
2015-01-03 02:26:21 +00:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
samus: fix charge state machine's handling of low power chargers
2014-12-15 19:53:46 +00:00
charge_state.h
power_button_x86: Inhibit AP power-on if battery level is too low
2014-12-17 18:07:10 +00:00
charger.h
Add "debug" option to charge_state_v2.c
2014-05-15 05:28:08 +00:00
chipset.h
x86: generalize power state machine for all platforms (2/2)
2014-01-09 05:30:49 +00:00
clock.h
lm4: Use low speed clock in deep sleep.
2013-10-21 23:59:38 +00:00
common.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
compile_time_macros.h
Improved the BUILD_ASSERT macro to work outside of functions.
2013-04-29 11:05:08 -07:00
config.h
mec1322: Added support to use crystal vs oscillator based on board's clock circuitry.
2014-12-29 19:04:38 +00:00
console.h
Samus: Split motion sense and lid angle
2014-10-29 22:23:54 +00:00
crc8.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.h
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
dma.h
Make DMA interface chip independent
2014-06-23 21:48:33 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
pd: Modify EC_CMD_USB_PD_RW_HASH_ENTRY to return PD device image type
2014-12-20 08:54:18 +00:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
eoption.h
Clean up a few modules in common/
2012-10-26 09:49:38 -07:00
extpower_falco.h
Rename charge_state.[ch] to charge_state_v1.[ch]
2014-03-20 23:51:00 +00:00
extpower_spring.h
cleanup: Still more TODO comments
2013-11-02 01:07:10 +00:00
extpower.h
Rename extpower_usb to extpower_spring
2013-08-28 01:54:48 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
Fix incorrect valid and writable flash flags
2014-10-15 23:56:27 +00:00
gesture.h
Samus: move gesture to common
2014-10-29 22:23:43 +00:00
gpio_list.h
Add config option to reduce GPIO name string size.
2014-12-16 22:47:50 +00:00
gpio_signal.h
gpio: Replace duplication in gpio declarations with X-macro file
2014-06-26 02:43:01 +00:00
gpio.h
Add support for shared interrupts.
2014-12-19 00:05:16 +00:00
gpio.wrap
GPIO: Move definition of alternate functions to gpio.inc
2014-07-17 00:39:52 +00:00
hooks.h
Hooks: Use CONCAT and STRINGIFY macros in hook definitions
2014-12-02 01:57:31 +00:00
host_command.h
lightbar: ask the PD MCU for the charge direction
2014-12-11 04:23:33 +00:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c_arbitration.h
Move I2C arbitration to its own file
2013-03-20 15:23:29 -07:00
i2c.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
in_stream.h
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.h
Add inductive charging control module
2014-08-25 20:52:32 +00:00
jtag.h
lm4: Use low speed clock in deep sleep.
2013-10-21 23:59:38 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
More keyboard scan test
2013-06-18 10:31:09 -07:00
keyboard_mkbp.h
cleanup: mkbp keyboard module
2013-10-30 23:10:13 +00:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
led_common.h
Peppy ectool led command
2013-08-07 12:43:48 -07:00
lid_angle.h
accel: Add host cmd for setting lid angle threshold for disabling keyboard wake
2014-04-11 04:00:44 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
Improve EC console messages for lightbar stuff
2014-11-21 06:23:16 +00:00
link_defs.h
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
lpc.h
baytrail: Workaround for stuck boot process
2014-04-30 10:00:02 +00:00
math_util.h
math: use CONFIG_FPU when using float.
2014-11-09 01:07:07 +00:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
module_id.h
discovery-stm32f072: Enable SPI over USB tunnel
2014-10-23 01:41:37 +00:00
motion_lid.h
Samus: Split motion sense and lid angle
2014-10-29 22:23:54 +00:00
motion_sense.h
motion: Add decoding for MOTION_CMD_DUMP v1 command
2014-11-18 05:19:08 +00:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
out_stream.h
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
panic.h
ryu: Use brief assertion failure message
2014-10-01 06:53:14 +00:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
rename power_state* to charge_state*
2014-01-07 04:53:20 +00:00
port80.h
port80: Track and export last post code in previous boot
2012-08-13 14:58:38 -07:00
power_button.h
power_button: expose raw signal assertion
2014-08-21 08:02:00 +00:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
stm32l: supports fake-hibernate
2014-03-06 23:14:07 +00:00
printf.h
Clean up printf module
2012-10-25 14:12:10 -07:00
pwm.h
Separate fan_t from pwm_t
2013-10-30 23:10:10 +00:00
queue.h
Queue: Add functionality needed by new USART stream driver
2014-09-18 02:59:24 +00:00
rsa.h
Add RW firmware signature verification for common runtime
2014-12-01 20:30:46 +00:00
sha1.h
samus: add host commands for flashing zinger RW
2014-08-26 23:06:23 +00:00
sha256.h
Clean up vboot hash support
2012-10-25 17:03:44 -07:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
spi_flash.h
Fix errors discovered by new compiler.
2014-11-21 02:44:47 +00:00
spi.h
mec1322: Add SPI master driver
2014-06-26 06:48:37 +00:00
stack_trace.h
emulator: Move trace dump to a separate module
2014-01-22 04:52:49 +00:00
switch.h
Split x86 power button logic out of switch.c
2013-07-17 10:49:48 -07:00
system.h
system: Add function to convert passed system_image_copy_t to string
2014-12-22 21:50:07 +00:00
task_id.h
Add interrupt support for emulator
2014-01-06 12:40:45 +00:00
task.h
stm32f: Add DMA interrupt handlers for channel 1 to 3
2014-10-21 00:44:39 +00:00
temp_sensor_chip.h
cleanup: Rename and move header files
2013-10-23 21:27:40 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
Optimize memset
2014-03-01 20:15:59 +00:00
thermal.h
Completely new thermal/fan implementation
2013-08-23 10:38:36 -07:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
cleanup: More comments in timer.h
2013-11-21 00:09:09 +00:00
uart.h
lm4: Use low speed clock in deep sleep.
2013-10-21 23:59:38 +00:00
usb_api.h
stm32: Do not wait for USB host if USB is disabled
2014-11-21 02:44:07 +00:00
usb_bb.h
usb: Groundwork for USB BOS & Billboard class descriptors.
2014-10-11 02:22:23 +00:00
usb_charge.h
rambi: Leave 5V rail on in S3 if USB ports are powered
2014-01-23 19:32:27 +00:00
usb_console.h
ryu: Enable PD/EC console over USB
2014-11-13 03:14:37 +00:00
usb_hid.h
usb: add USB HID driver
2014-06-19 03:28:43 +00:00
usb_ms_scsi.h
usb: add support for mass storage (bulk-only)
2014-08-15 17:55:04 +00:00
usb_ms.h
usb: add support for mass storage (bulk-only)
2014-08-15 17:55:04 +00:00
usb_pd.h
pd: add new state to wait for getSinkCap response
2015-01-03 02:26:42 +00:00
usb.h
USB: Add setup packet struct and parsing routine
2014-12-08 21:51:43 +00:00
util.h
ryu: Use brief assertion failure message
2014-10-01 06:53:14 +00:00
vboot_hash.h
Invalidate hash if flash operation changes the hashed region
2012-12-10 15:14:38 -08:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Allow AP to set wireless power state in suspend
2014-02-22 00:50:37 +00:00