Mary Ruthven e47eaaf2e8 cr50: unlock console ...

UART0 RX only needs to be disabled on reef. This change uses a system
property instead of a #define to disable UART0 RX that way it can just
be done on Reef not Gru or the dev board.

BUG=chrome-os-partner:55510
BRANCH=none
TEST=manual
	rw 0x4060000c shows a value of 1 for reef and 3 for gru

	gru kevin and reef still boot.

	Connect DIOA13 to DIOA1 on the dev board and verify the console
	can be used.

Change-Id: I5ee3559c2b35f959c0d67f233d1dfa40743b4064
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/378336
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>

2016-09-01 07:39:38 -07:00

..

dcrypto

CR50: when testing an RSA key, check that N % p == 0

2016-07-21 17:32:25 -07:00

loader

Cr50: Rearrange flash to allow dual RO images

2016-07-22 15:36:14 -07:00

blob.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

build.mk

g: Remove unused GC_REVISION compile-time constant

2016-07-24 23:11:30 -07:00

clock.c

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

config_chip.h

Modified flash API batch write logic to respect row boundaries.

2016-08-24 17:40:39 -07:00

flash_config.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash_info.h

CR50: add endorsement certificate flow

2016-07-23 02:18:49 +00:00

flash.c

Modified flash API batch write logic to respect row boundaries.

2016-08-24 17:40:39 -07:00

gpio.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

hw_regdefs.h

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

hwtimer.c

Timer initialization & conversion bug fixes

2016-05-28 01:45:31 +00:00

i2cs.c

g: i2c slave driver

2016-04-27 18:12:25 -07:00

i2cs.h

g: i2c slave driver

2016-04-27 18:12:25 -07:00

idle.c

Cr50: Implement the console unlock dance

2016-08-31 18:05:11 +00:00

init_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

jitter.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

jtag.c

Release EC_RST_L in RW after all initialization has completed

2016-08-13 17:31:34 -07:00

pmu.c

cr50: code modifications to support FPGA B1

2015-08-11 02:58:45 +00:00

pmu.h

Cr50: Fixed soft resets on silicon.

2016-02-01 21:17:22 +00:00

polling_uart.c

cr50: add polling uart implementation

2015-08-11 02:58:39 +00:00

rbox.c

cr50: remove internal pull up on DIOM0

2016-08-31 21:35:30 +00:00

rbox.h

cr50: remove internal pull up on DIOM0

2016-08-31 21:35:30 +00:00

rdd.c

g: Add help message for test_rdd command

2016-08-25 21:59:13 -07:00

rdd.h

g: disable usb wakeup when debug accessory is disconnected

2016-07-19 16:32:10 -07:00

registers.h

Added additional macros for the TIMEUS module.

2016-08-29 13:31:01 -07:00

signed_header.h

Modified the bootloader to check PMU_PWRDN_SCRATCH30 and load the newer

2016-01-28 20:58:32 +00:00

spi_master.c

g: tristate spi master pins

2016-07-14 23:34:38 -07:00

spi_master.h

Cr50: Export the chip-specific SPI master functions

2016-05-31 22:16:42 +00:00

sps_tpm.c

g: Remove obsolete spstpm command

2016-08-22 14:52:14 -07:00

sps.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

sps.h

cr50: sps: allow receive registration function set FIFO threshold

2015-08-13 23:34:05 +00:00

system.c

cr50: unlock console

2016-09-01 07:39:38 -07:00

trng.c

cr50: trng: handle (unlikely) TRNG timeout

2016-03-14 20:11:30 -07:00

uart.c

g: disable uart 1 and 2 during init

2016-07-13 19:09:19 -07:00

uartn.c

cr50: unlock console

2016-09-01 07:39:38 -07:00

uartn.h

cr50: disable UART peripheral when the device is powered off.

2016-05-27 18:08:51 -07:00

upgrade_fw.c

usb_updater: implement version 4 on the cr50 side

2016-08-26 21:51:34 +00:00

upgrade_fw.h

usb_updater: move to protocol version 4

2016-08-26 21:49:30 +00:00

usart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usart.h

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usb_console.c

g: increase usb console TX buffer size to 4K

2016-08-01 13:45:00 -07:00

usb_endpoints.S

cr50: add USB support

2015-04-02 20:27:46 +00:00

usb_hid.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

usb_hw.h

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_spi.c

g: implement EC/AP flash access via CCD

2016-06-03 20:14:58 -07:00

usb_spi.h

cr50: fix usb spi to disable resets while doing updates

2016-07-28 20:20:51 -07:00

usb_upgrade.c

g: implement firmware upgrade protocol version 3

2016-08-22 23:27:23 -07:00

usb-stream.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

usb-stream.h

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

watchdog.c

g: Always reboot on watchdog or lockup

2016-08-03 19:40:48 -07:00