Alec Berg 98daf2a9d1 samus: add hot keys alt+voldown+0|1|2 to set charging port ...

Add hot key detection for alt + volume down + 0|1|2 to set the
charging port by sending the charge override command to PD MCU.

This should be removed once hot-keys (or some other UI) is added
to higher layers.

BUG=chrome-os-partner:34850
BRANCH=samus
TEST=load onto samus and connect to another samus. use hot keys
and see that charge override command gets set appropriately on
PD MCU.

Change-Id: I7e72d597a02b7aca3326911796d20003f6697077
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238226
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2015-01-07 02:32:52 +00:00

..

acpi.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

adc.c

Move ADC console command to common

2013-12-20 05:07:58 +00:00

als.c

samus: move als sampling from hooks to its own task

2014-06-04 21:00:32 +00:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

build.mk

battery: Add support for TI's BQ27621_g1 fuel gauge.

2014-12-31 00:01:00 +00:00

button.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

case_closed_debug.c

ryu: Enable PD/EC console over USB

2014-11-13 03:14:37 +00:00

charge_manager.c

samus: when battery is full, and not in S0, stop charging

2015-01-03 02:26:21 +00:00

charge_state_v1.c

power_button_x86: Inhibit AP power-on if battery level is too low

2014-12-17 18:07:10 +00:00

charge_state_v2.c

samus: when battery is full, and not in S0, stop charging

2015-01-03 02:26:21 +00:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Move CLZ emulation to common code

2014-03-06 21:32:57 +00:00

console_output.c

Samus: Split motion sense and lid angle

2014-10-29 22:23:54 +00:00

console.c

usb: add USB console driver

2014-07-17 00:40:23 +00:00

crc8.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

eoption.c

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

extpower_falco.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

extpower_gpio.c

Initialize extpower module prior to modules with default priority

2014-03-29 02:14:26 +00:00

extpower_snow.c

Remove bolt, daisy, kirby, puppy, slippy boards

2013-11-21 22:21:56 +00:00

extpower_spring.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

fan.c

Remove frequent fan-change updates from EC console

2014-11-14 23:56:39 +00:00

firmware_image.lds.S

Remove extra EAh at end of RW image.

2014-12-05 00:02:06 +00:00

firmware_image.S

ryu_sh_loader: Add board directory for load image

2014-12-15 22:46:21 +00:00

flash.c

Fix incorrect valid and writable flash flags

2014-10-15 23:56:27 +00:00

fmap.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

gesture.c

gesture: add absolute threshold for start of tap for battery

2014-12-30 22:04:11 +00:00

gpio.c

Added v1 version of ectool gpioget supporting more functions

2014-04-29 03:11:16 +00:00

hooks.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

host_command_master.c

samus: add automatic retries for host commands from EC to PD

2014-09-17 01:24:05 +00:00

host_command_pd.c

lightbar: ask the PD MCU for the charge direction

2014-12-11 04:23:33 +00:00

host_command.c

Support command versioning of new host command range

2015-01-06 02:33:04 +00:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_arbitration.c

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

i2c: allow for mulitple i2c busses to utilize automatic unwedging

2014-09-30 08:32:23 +00:00

in_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

inductive_charging.c

ryu: Try to clear CHARGE_DONE when the lid is just closed

2014-12-12 07:26:49 +00:00

keyboard_8042.c

Add demo_tap() function for lightbar demo mode

2014-09-26 09:21:06 +00:00

keyboard_mkbp.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

keyboard_scan.c

samus: add hot keys alt+voldown+0|1|2 to set charging port

2015-01-07 02:32:52 +00:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: switch default firmware to use STM32F373

2014-11-12 23:08:12 +00:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

lid_angle.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

lid_switch.c

lid_switch: Support forced lid open

2014-11-18 01:05:49 +00:00

lightbar.c

lightbar: Pulse lightbar in S5 if power-up is inhibited

2015-01-06 01:19:06 +00:00

main.c

Add RW firmware signature verification for common runtime

2014-12-01 20:30:46 +00:00

math_util.c

math: use CONFIG_FPU when using float.

2014-11-09 01:07:07 +00:00

memory_commands.c

cr50: Replaced ww with md EC cli

2014-12-04 04:02:45 +00:00

mkbp_event.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

motion_lid.c

Samus: Split motion sense and lid angle

2014-10-29 22:23:54 +00:00

motion_sense.c

motion: Add decoding for MOTION_CMD_DUMP v1 command

2014-11-18 05:19:08 +00:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

out_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

panic_output.c

ryu: Use brief assertion failure message

2014-10-01 06:53:14 +00:00

pmu_tps65090_charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

pmu_tps65090_powerinfo.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

pmu_tps65090.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

port80.c

CHROMIUM: ec: Add Port 80 history access from ectools

2014-05-07 03:41:27 +00:00

power_button_x86.c

power_button_x86: Inhibit AP power-on if battery level is too low

2014-12-17 18:07:10 +00:00

power_button.c

power_button: expose raw signal assertion

2014-08-21 08:02:00 +00:00

printf.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

pwm.c

Move source files to driver/ and power/ subdirs

2013-10-23 20:07:25 +00:00

queue.c

Queue: Add functionality needed by new USART stream driver

2014-09-18 02:59:24 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

Add RW firmware signature verification for common runtime

2014-12-01 20:30:46 +00:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smbus.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

spi_flash.c

Fix errors discovered by new compiler.

2014-11-21 02:44:47 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

system: Add function to convert passed system_image_copy_t to string

2014-12-22 21:50:07 +00:00

temp_sensor.c

cleanup: Rename and move header files

2013-10-23 21:27:40 +00:00

test_util.c

emulator: Keep fail count across sysjump

2014-01-08 03:49:36 +00:00

thermal.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

EC: Ensure the udelay function waits at least the time indicated.

2014-10-23 22:41:08 +00:00

uart_buffering.c

Make Ctrl-S and Ctrl-Q match the rest of the world

2014-06-04 21:01:43 +00:00

usb_pd_policy.c

pd: Remove pe dump command by default.

2014-12-22 21:50:13 +00:00

usb_pd_protocol.c

samus: pd: on PD connection, if sink, ask for power swap

2015-01-07 02:32:38 +00:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

Support inverted ILIM_SEL for smart USB port power

2014-08-23 02:42:21 +00:00

util.c

util: move console command argument parsing to util.c

2014-06-11 00:17:06 +00:00

vboot_hash.c

Add CONFIG_CMD_HASH to optionally remove 'hash' console command.

2015-01-06 04:45:53 +00:00

version.c

USB: Remove special case for iVersion string descriptor

2014-11-04 21:34:39 +00:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00