Kevin K Wong 46dc172711 npcx: set the BUSY bit while handling ACPI command write. ...

BUG=chrome-os-partner:55583
BRANCH=none
TEST=verified OBF status is cleared during idle without event which
     means kernel driver waited for the BUSY bit and read the data.

Change-Id: I79357fea5483fe7a175c60f54235926e105ec832
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/373043
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Mulin Chao <mlchao@nuvoton.com>

2016-08-21 15:52:09 -07:00

..

lfw

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

spiflashfw

nuc: Fixed flash layout issue for npcx

2015-09-21 20:50:56 -07:00

adc_chip.h

wheatley / nuc: Modified the internal ref voltage of ADC to 2.816V

2016-02-17 02:02:03 -08:00

adc.c

npcx: adc: Properly wait for conversion interrupt

2016-08-10 15:30:47 -07:00

build.mk

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

clock_chip.h

nuc: Adjust core clock from 16/12 MHz to 15/13 MHz.

2016-01-20 20:36:53 -08:00

clock.c

npcx: Fixed bug that unexpected value of timer which source clock is 32K

2016-05-11 21:24:32 -07:00

config_chip.h

kevin / gru: Increase size of code RAM

2016-07-26 17:32:31 -07:00

config_flash_layout.h

kevin: Move RAM from data section to code

2016-05-10 09:34:45 -07:00

espi.c

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

fan_chip.h

nuc: Support rpm mode for fan control.

2016-01-06 20:43:32 -08:00

fan.c

hooks: Add relative HOOK_INIT priority for peripherals

2016-05-05 01:12:25 -07:00

flash.c

npcx/flash: Don't print uninitialized values

2016-08-12 13:45:18 -07:00

gpio.c

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

header.c

wheatley: Add CONFIG_LTO definition to reduce FW size.

2015-12-30 20:40:48 -08:00

hwtimer_chip.h

nuc: Add support for CONFIG_LOW_POWER_S0.

2016-02-06 01:57:58 -08:00

hwtimer.c

npcx: Adjust relative IRQ priorities for high-priority UART

2016-08-07 21:43:55 -07:00

i2c.c

npcx/i2c: Remove static from arrays & functions used by inline function

2016-08-10 20:07:28 -07:00

jtag.c

nuc: Enable JTAG directly by NPCX_ENABLE_JTAG definition

2015-10-17 04:56:09 -07:00

keyboard_raw.c

npcx: Adjust relative IRQ priorities for high-priority UART

2016-08-07 21:43:55 -07:00

lpc_chip.h

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

lpc.c

npcx: set the BUSY bit while handling ACPI command write.

2016-08-21 15:52:09 -07:00

peci.c

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

pwm_chip.h

pwm: Add PWM_CONFIG_DSLEEP config flag

2016-04-27 23:58:04 -07:00

pwm.c

npcx: Fixed pwm bug to improve deviation of PWM frequency.

2016-08-12 20:49:49 -07:00

registers.h

npcx: set the BUSY bit while handling ACPI command write.

2016-08-21 15:52:09 -07:00

rom_chip.h

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

shi_chip.h

npcx: Rename CONFIG_SHI to CONFIG_HOSTCMD_SPS

2016-03-08 13:56:38 -08:00

shi.c

Revert "shi: Enable SHI interrupt from CS interrupt"

2016-08-21 00:27:56 +00:00

spi.c

npcx: spi: disable all port from board struct

2016-05-06 00:25:15 -07:00

system_chip.h

nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.

2016-01-14 22:12:05 -08:00

system.c

Fix interrupt disabling problem for gpio volume button.

2016-07-20 04:52:15 -07:00

uart.c

npcx: Adjust relative IRQ priorities for high-priority UART

2016-08-07 21:43:55 -07:00

watchdog.c

npcx: Fixed bug that unexpected value of timer which source clock is 32K

2016-05-11 21:24:32 -07:00