Gwendal Grignou f48b781dea driver: bmp280: set_data_rate rate in mHz. ...

The argument is mHz not ms.

BUG=chrome-os-partner:57117,b:27849483
BRANCH=reef
TEST=Using frequency sysfs parameter check the returned value is close
to the requested value. It will be greater than the requested frequency.
It maxes out at 76Hz when frequency is greater than 13.5Hz.
Check Androsensor reports pressure.

Change-Id: Ie40ac0f0a83d1578b5b66097d85a9124ec8e4c54
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/385083
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>

2016-09-15 16:16:10 -07:00

..

battery

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

charger

bd99955: enable power-save mode only when we have no USB data

2016-09-15 02:50:06 -07:00

led

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

tcpm

anx74xx: fix Rp control

2016-09-15 05:24:05 -07:00

temp_sensor

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

accel_bma2x2.c

driver: Add support bma255 sensor

2016-05-31 14:14:44 -07:00

accel_bma2x2.h

driver: Add support bma255 sensor

2016-05-31 14:14:44 -07:00

accel_kionix.c

driver: kionix: Add set_value

2016-09-07 21:32:37 -07:00

accel_kionix.h

driver: kionix: Remove variant field.

2016-09-01 22:55:41 -07:00

accel_kx022.h

driver: Refactor Kionix Accelerometer drivers.

2015-09-15 11:02:43 -07:00

accel_kxcj9.h

driver: Refactor Kionix Accelerometer drivers.

2015-09-15 11:02:43 -07:00

accelgyro_bmi160.c

driver: bmi160: Add support bmi168

2016-05-10 09:34:54 -07:00

accelgyro_bmi160.h

driver: bmi160: Add support bmi168

2016-05-10 09:34:54 -07:00

accelgyro_lsm6ds0.c

sensor: update sensor driver to use I2C port from motion_sensor_t

2016-03-31 21:35:56 -07:00

accelgyro_lsm6ds0.h

motion_sense: Add more complex EC/AP sensor rate support.

2015-08-29 01:34:14 -07:00

als_al3010.c

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_al3010.h

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_isl29035.c

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_isl29035.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_opt3001.c

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_opt3001.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_si114x.c

driver: si114x: Handle overflow properly.

2016-06-17 07:36:34 -07:00

als_si114x.h

driver: si114x: Unlock the device if stuck

2015-12-01 03:46:34 -08:00

baro_bmp280.c

driver: bmp280: set_data_rate rate in mHz.

2016-09-15 16:16:10 -07:00

baro_bmp280.h

driver: bmp280: set_data_rate rate in mHz.

2016-09-15 16:16:10 -07:00

build.mk

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

gyro_l3gd20h.c

driver: l3gd20h: remove unnecessary test.

2016-08-24 17:40:29 -07:00

gyro_l3gd20h.h

driver: Add L3GD20H gyrometer basic driver support

2015-10-20 15:02:49 -07:00

ina2xx.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ina2xx.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

mag_bmm150.c

sensor: update sensor driver to use I2C port from motion_sensor_t

2016-03-31 21:35:56 -07:00

mag_bmm150.h

driver: bmm150: Use Bosch recommend repetition

2015-10-15 18:08:25 -07:00

mcdp28x0.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

mcdp28x0.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb9281.h

usb_charger: Move part-specific code to usb_switch driver

2016-05-13 23:34:51 -07:00

pi3usb30532.h

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

pmic_tps650830.h

Kunimitsu: Fix VRMODECTRL for PMIC VCCIO control

2015-09-29 13:07:08 -07:00

pmu_tps65090_charger.c

common: Move tps65090 PMIC driver to driver/.

2015-09-18 17:55:35 -07:00

pmu_tps65090_powerinfo.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pmu_tps65090.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ps8740.h

ps8740: Add a function to tune USB EQ settings

2015-11-24 11:02:49 -08:00

regulator_ir357x.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

usb_mux_pi3usb30532.c

cleanup: Fix gcc 5.2.1 compile errors

2015-11-11 11:00:56 -08:00

usb_mux_ps8740.c

ps8740: Add a function to tune USB EQ settings

2015-11-24 11:02:49 -08:00

usb_mux_virtual.c

kevin / gru: Notify host of HPD IRQ status

2016-08-10 20:07:32 -07:00

usb_mux.c

usb_mux: Correct an error print.

2016-08-24 17:40:52 -07:00

usb_switch_pi3usb9281.c

charger: Send host event after charge info is updated.

2016-08-24 17:40:38 -07:00