Bill Richardson cd4270d4e3 Cr50: Remove unused wipe_nvram() function. ...

Nothing uses this. Take it out.

BUG=none
BRANCH=none
TEST=make buildall

Change-Id: I4512130a97a54cf23ec6d715c4776b7b4d1b59a1
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/382662
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>

2016-09-09 12:33:45 -07:00

..

dcrypto

CR50: bn_modinv: correctly handle even inputs

2016-09-02 15:12:07 -07:00

loader

Cr50: Rearrange flash to allow dual RO images

2016-07-22 15:36:14 -07:00

blob.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

build.mk

cr50: provide build mode for signing with fob

2016-09-07 00:16:56 -07:00

clock.c

cr50: add basic rbox support

2016-04-29 16:07:13 -07:00

config_chip.h

Cr50: NvMem: Increase partition size from 0x2800 to 0x4000

2016-09-02 21:16:38 -07:00

flash_config.h

CR50: add support for writing to info bank

2016-06-10 15:46:32 -07:00

flash_info.h

CR50: add endorsement certificate flow

2016-07-23 02:18:49 +00:00

flash.c

Modified flash API batch write logic to respect row boundaries.

2016-08-24 17:40:39 -07:00

gpio.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

hw_regdefs.h

cr50: integrate register definitions consistent with real silicon

2016-02-09 01:26:06 -08:00

hwtimer.c

g: switch to using timels for hwtimer

2016-09-02 04:24:03 -07:00

i2cs.c

Cr50: I2CS TPM: Added routine to write to HW fifo a word at a time

2016-09-05 23:22:18 -07:00

i2cs.h

Cr50: I2CS TPM: Added routine to write to HW fifo a word at a time

2016-09-05 23:22:18 -07:00

idle.c

g: switch to using timels for hwtimer

2016-09-02 04:24:03 -07:00

init_chip.h

Cr50: Enable the USB SOF clock auto-calibration

2016-05-04 16:15:02 -07:00

jitter.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

jtag.c

Release EC_RST_L in RW after all initialization has completed

2016-08-13 17:31:34 -07:00

pmu.c

cr50: code modifications to support FPGA B1

2015-08-11 02:58:45 +00:00

pmu.h

Cr50: Fixed soft resets on silicon.

2016-02-01 21:17:22 +00:00

polling_uart.c

cr50: add polling uart implementation

2015-08-11 02:58:39 +00:00

rbox.c

g: override RBOX fuses for correct POR behavior

2016-09-09 00:04:48 -07:00

rdd.c

g: Add help message for test_rdd command

2016-08-25 21:59:13 -07:00

rdd.h

g: disable usb wakeup when debug accessory is disconnected

2016-07-19 16:32:10 -07:00

registers.h

Added additional macros for the TIMEUS module.

2016-08-29 13:31:01 -07:00

signed_header.h

Modified the bootloader to check PMU_PWRDN_SCRATCH30 and load the newer

2016-01-28 20:58:32 +00:00

spi_master.c

g: tristate spi master pins

2016-07-14 23:34:38 -07:00

spi_master.h

Cr50: Export the chip-specific SPI master functions

2016-05-31 22:16:42 +00:00

sps_tpm.c

Cr50: I2CS TPM: Unify tpm_registers interface between SPI and I2C

2016-09-05 23:22:15 -07:00

sps.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

sps.h

cr50: sps: allow receive registration function set FIFO threshold

2015-08-13 23:34:05 +00:00

system.c

g: usb update: clear fallback counter after update finishes

2016-09-09 02:58:49 -07:00

trng.c

cr50: trng: handle (unlikely) TRNG timeout

2016-03-14 20:11:30 -07:00

uart.c

g: disable uart 1 and 2 during init

2016-07-13 19:09:19 -07:00

uartn.c

cr50: unlock console

2016-09-01 07:39:38 -07:00

uartn.h

cr50: disable UART peripheral when the device is powered off.

2016-05-27 18:08:51 -07:00

upgrade_fw.c

Cr50: Remove unused wipe_nvram() function.

2016-09-09 12:33:45 -07:00

upgrade_fw.h

g: usb update: clear fallback counter after update finishes

2016-09-09 02:58:49 -07:00

usart.c

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usart.h

cr50: export AP and EC UART through USB

2016-04-07 13:00:39 -07:00

usb_console.c

g: increase usb console TX buffer size to 4K

2016-08-01 13:45:00 -07:00

usb_endpoints.S

cr50: add USB support

2015-04-02 20:27:46 +00:00

usb_hid.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

usb_hw.h

Cr50: Cleaner API for USB_DECLARE_IFACE callbacks

2015-12-11 11:22:02 -08:00

usb_spi.c

g: implement EC/AP flash access via CCD

2016-06-03 20:14:58 -07:00

usb_spi.h

cr50: fix usb spi to disable resets while doing updates

2016-07-28 20:20:51 -07:00

usb_upgrade.c

g: clear reset_counter after update

2016-09-02 09:32:24 -07:00

usb-stream.c

cr50: add support for creating multiple serial endpoints

2016-04-07 13:00:39 -07:00

usb-stream.h

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

usb.c

cr50: mark updated image as good once a usb request is received

2016-09-02 18:34:19 -07:00

watchdog.c

g: Always reboot on watchdog or lockup

2016-08-03 19:40:48 -07:00