scottk/kubernetes
1
0
Fork 0
mirror of https://github.com/optim-enterprises-bv/kubernetes.git synced 2025-11-03 19:58:17 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
2ca200f087362c240ee958e9304baaf6bebc9c6a
kubernetes/docs/user-guide/compute-resources.md
Mike Danese fe6b15ba2f rewrite all links to issues to k8s links
2015-08-05 21:11:11 -07:00

258 lines
12 KiB
Markdown
Raw Blame History

<!-- BEGIN MUNGE: UNVERSIONED_WARNING -->
<!-- BEGIN STRIP_FOR_RELEASE -->
<img src="http://kubernetes.io/img/warning.png" alt="WARNING"
width="25" height="25">
<img src="http://kubernetes.io/img/warning.png" alt="WARNING"
width="25" height="25">
<img src="http://kubernetes.io/img/warning.png" alt="WARNING"
width="25" height="25">
<img src="http://kubernetes.io/img/warning.png" alt="WARNING"
width="25" height="25">
<img src="http://kubernetes.io/img/warning.png" alt="WARNING"
width="25" height="25">
<h2>PLEASE NOTE: This document applies to the HEAD of the source tree</h2>
If you are using a released version of Kubernetes, you should
refer to the docs that go with that version.
<strong>
The latest 1.0.x release of this document can be found
[here](http://releases.k8s.io/release-1.0/docs/user-guide/compute-resources.md).
Documentation for other releases can be found at
[releases.k8s.io](http://releases.k8s.io).
</strong>
--
<!-- END STRIP_FOR_RELEASE -->
<!-- END MUNGE: UNVERSIONED_WARNING -->
# Compute Resources
**Table of Contents**
<!-- BEGIN MUNGE: GENERATED_TOC -->
- [Compute Resources](#compute-resources)
- [Container and Pod Resource Limits](#container-and-pod-resource-limits)
- [How Pods with Resource Limits are Scheduled](#how-pods-with-resource-limits-are-scheduled)
- [How Pods with Resource Limits are Run](#how-pods-with-resource-limits-are-run)
- [Monitoring Compute Resource Usage](#monitoring-compute-resource-usage)
- [Troubleshooting](#troubleshooting)
- [My pods are pending with event message failedScheduling](#my-pods-are-pending-with-event-message-failedscheduling)
- [My container is terminated](#my-container-is-terminated)
- [Planned Improvements](#planned-improvements)
<!-- END MUNGE: GENERATED_TOC -->
When specifying a [pod](pods.md), you can optionally specify how much CPU and memory (RAM) each
container needs. When containers have resource limits, the scheduler is able to make better
decisions about which nodes to place pods on, and contention for resources can be handled in a
consistent manner.
*CPU* and *memory* are each a *resource type*. A resource type has a base unit. CPU is specified
in units of cores. Memory is specified in units of bytes.
CPU and RAM are collectively referred to as *compute resources*, or just *resources*. Compute
resources are measureable quantities which can be requested, allocated, and consumed. They are
distinct from [API resources](working-with-resources.md). API resources, such as pods and
[services](services.md) are objects that can be written to and retrieved from the Kubernetes API
server.
## Container and Pod Resource Limits
Each container of a Pod can optionally specify `spec.container[].resources.limits.cpu` and/or
`spec.container[].resources.limits.memory`. The `spec.container[].resources.requests` field is not
currently used and need not be set.
Specifying resource limits is optional. In some clusters, an unset value may be replaced with a
default value when a pod is created or updated. The default value depends on how the cluster is
configured.
Although limits can only be specified on individual containers, it is convenient to talk about pod
resource limits. A *pod resource limit* for a particular resource type is the sum of the resource
limits of that type for each container in the pod, with unset values treated as zero.
The following pod has two containers. Each has a limit of 0.5 core of cpu and 128MiB
(2<sup>20</sup> bytes) of memory. The pod can be said to have a limit of 1 core and 256MiB of
memory.
```yaml
apiVersion: v1
kind: Pod
metadata:
name: frontend
spec:
containers:
- name: db
image: mysql
resources:
limits:
memory: "128Mi"
cpu: "500m"
- name: wp
image: wordpress
resources:
limits:
memory: "128Mi"
cpu: "500m"
```
## How Pods with Resource Limits are Scheduled
When a pod is created, the Kubernetes scheduler selects a node for the pod to
run on. Each node has a maximum capacity for each of the resource types: the
amount of CPU and memory it can provide for pods. The scheduler ensures that,
for each resource type (CPU and memory), the sum of the resource limits of the
containers scheduled to the node is less than the capacity of the node. Note
that although actual memory or CPU resource usage on nodes is very low, the
scheduler will still refuse to place pods onto nodes if the capacity check
fails. This protects against a resource shortage on a node when resource usage
later increases, such as due to a daily peak in request rate.
Note: Although the scheduler normally spreads pods out across nodes, there are currently some cases
where pods with no limits (unset values) might all land on the same node.
## How Pods with Resource Limits are Run
When kubelet starts a container of a pod, it passes the CPU and memory limits to the container
runner (Docker or rkt).
When using Docker:
- The `spec.container[].resources.limits.cpu` is multiplied by 1024, converted to an integer, and
used as the value of the [`--cpu-shares`](
https://docs.docker.com/reference/run/#runtime-constraints-on-resources) flag to the `docker run`
command.
- The `spec.container[].resources.limits.memory` is converted to an integer, and used as the value
of the [`--memory`](https://docs.docker.com/reference/run/#runtime-constraints-on-resources) flag
to the `docker run` command.
**TODO: document behavior for rkt**
If a container exceeds its memory limit, it may be terminated. If it is restartable, it will be
restarted by kubelet, as will any other type of runtime failure.
A container may or may not be allowed to exceed its CPU limit for extended periods of time.
However, it will not be killed for excessive CPU usage.
To determine if a container cannot be scheduled or is being killed due to resource limits, see the
"Troubleshooting" section below.
## Monitoring Compute Resource Usage
The resource usage of a pod is reported as part of the Pod status.
If [optional monitoring](http://releases.k8s.io/HEAD/cluster/addons/cluster-monitoring/README.md) is configured for your cluster,
then pod resource usage can be retrieved from the monitoring system.
## Troubleshooting
### My pods are pending with event message failedScheduling
If the scheduler cannot find any node where a pod can fit, then the pod will remain unscheduled
until a place can be found. An event will be produced each time the scheduler fails to find a
place for the pod, like this:
```console
$ kubectl describe pods/frontend | grep -A 3 Events
Events:
FirstSeen LastSeen Count From SubobjectPath Reason Message
Tue, 30 Jun 2015 09:01:41 -0700 Tue, 30 Jun 2015 09:39:27 -0700 128 {scheduler } failedScheduling Error scheduling: For each of these fitness predicates, pod frontend failed on at least one node: PodFitsResources.
```
If a pod or pods are pending with this message, then there are several things to try:
- Add more nodes to the cluster.
- Terminate unneeded pods to make room for pending pods.
- Check that the pod is not larger than all the nodes. For example, if all the nodes
have a capacity of `cpu: 1`, then a pod with a limit of `cpu: 1.1` will never be scheduled.
You can check node capacities with the `kubectl get nodes -o <format>` command.
Here are some example command lines that extract just the necessary information:
- `kubectl get nodes -o yaml | grep '\sname\|cpu\|memory'`
- `kubectl get nodes -o json | jq '.items[] | {name: .metadata.name, cap: .status.capacity}'`
The [resource quota](../admin/resource-quota.md) feature can be configured
to limit the total amount of resources that can be consumed. If used in conjunction
with namespaces, it can prevent one team from hogging all the resources.
### My container is terminated
Your container may be terminated because it's resource-starved. To check if a container is being killed because it is hitting a resource limit, call `kubectl describe pod`
on the pod you are interested in:
```console
[12:54:41] $ ./cluster/kubectl.sh describe pod simmemleak-hra99
Name: simmemleak-hra99
Namespace: default
Image(s): saadali/simmemleak
Node: kubernetes-minion-tf0f/10.240.216.66
Labels: name=simmemleak
Status: Running
Reason:
Message:
IP: 10.244.2.75
Replication Controllers: simmemleak (1/1 replicas created)
Containers:
simmemleak:
Image: saadali/simmemleak
Limits:
cpu: 100m
memory: 50Mi
State: Running
Started: Tue, 07 Jul 2015 12:54:41 -0700
Ready: False
Restart Count: 5
Conditions:
Type Status
Ready False
Events:
FirstSeen LastSeen Count From SubobjectPath Reason Message
Tue, 07 Jul 2015 12:53:51 -0700 Tue, 07 Jul 2015 12:53:51 -0700 1 {scheduler } scheduled Successfully assigned simmemleak-hra99 to kubernetes-minion-tf0f
Tue, 07 Jul 2015 12:53:51 -0700 Tue, 07 Jul 2015 12:53:51 -0700 1 {kubelet kubernetes-minion-tf0f} implicitly required container POD pulled Pod container image "gcr.io/google_containers/pause:0.8.0" already present on machine
Tue, 07 Jul 2015 12:53:51 -0700 Tue, 07 Jul 2015 12:53:51 -0700 1 {kubelet kubernetes-minion-tf0f} implicitly required container POD created Created with docker id 6a41280f516d
Tue, 07 Jul 2015 12:53:51 -0700 Tue, 07 Jul 2015 12:53:51 -0700 1 {kubelet kubernetes-minion-tf0f} implicitly required container POD started Started with docker id 6a41280f516d
Tue, 07 Jul 2015 12:53:51 -0700 Tue, 07 Jul 2015 12:53:51 -0700 1 {kubelet kubernetes-minion-tf0f} spec.containers{simmemleak} created Created with docker id 87348f12526a
```
The `Restart Count: 5` indicates that the `simmemleak` container in this pod was terminated and restarted 5 times.
Once [#10861](http://issue.k8s.io/10861) is resolved the reason for the termination of the last container will also be printed in this output.
Until then you can call `get pod` with the `-o template -t ...` option to fetch the status of previously terminated containers:
```console
[13:59:01] $ ./cluster/kubectl.sh get pod -o template -t '{{range.status.containerStatuses}}{{"Container Name: "}}{{.name}}{{"\r\nLastState: "}}{{.lastState}}{{end}}' simmemleak-60xbc
Container Name: simmemleak
LastState: map[terminated:map[exitCode:137 reason:OOM Killed startedAt:2015-07-07T20:58:43Z finishedAt:2015-07-07T20:58:43Z containerID:docker://0e4095bba1feccdfe7ef9fb6ebffe972b4b14285d5acdec6f0d3ae8a22fad8b2]][13:59:03] clusterScaleDoc ~/go/src/github.com/GoogleCloudPlatform/kubernetes $
```
We can see that this container was terminated because `reason:OOM Killed`, where *OOM* stands for Out Of Memory.
## Planned Improvements
The current system only allows resource quantities to be specified on a container.
It is planned to improve accounting for resources which are shared by all containers in a pod,
such as [EmptyDir volumes](volumes.md#emptydir).
The current system only supports container limits for CPU and Memory.
It is planned to add new resource types, including a node disk space
resource, and a framework for adding custom [resource types](../design/resources.md#resource-types).
The current system does not facilitate overcommitment of resources because resources reserved
with container limits are assured. It is planned to support multiple levels of [Quality of
Service](http://issue.k8s.io/168).
Currently, one unit of CPU means different things on different cloud providers, and on different
machine types within the same cloud providers. For example, on AWS, the capacity of a node
is reported in [ECUs](http://aws.amazon.com/ec2/faqs/), while in GCE it is reported in logical
cores. We plan to revise the definition of the cpu resource to allow for more consistency
across providers and platforms.
<!-- BEGIN MUNGE: GENERATED_ANALYTICS -->
[![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/docs/user-guide/compute-resources.md?pixel)]()
<!-- END MUNGE: GENERATED_ANALYTICS -->
Reference in New Issue View Git Blame Copy Permalink