Create a set of excel utils to be used for .xls and .xlsx files, for
reading workbook, reading sheets, ... optimize openpyxl access to
sheet to save computation time.
Use this opportunity to refactor service sheet without namedtuple
and simplify code
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ibaf3aac40b3f6ca4829d8ea8cd506523d318103a
enable changing the reference span loss and the ratio of the
loss deviation to this reference that should be reported on
the span input.
Initial target used a hardcoded 20dB loss span with
0.3 power slope.
update documentation accordingly.
requires yang updates
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ib763db6be2bd7e947057176f3246f19ac7e6ac0d
Correctly uses the oms band and spacing for computing the nb of channel
and total power for design per band.
In order to keep the SI values as reference, introduce a new parameter
in SI to indicate wether to use this feature or not.
If "use_si_channel_count_for_design": true, then the f_min, f_max and spacing
from SI are used for all OMSes
else, the f_min, f_max, spacing defined per OMS (design_bands) is used.
This impacts tests where the artificial C-band boudaries were hardcoded, and
it also has an impact on performances when SI's defined nb of channels is larger
than the one defined per OMS. In this case the design was considering a larger
total power than the one finally propagated which resulted in reduced performance.
This feature now corrects this case (if "use_si_channel_count_for_design": false
which is the default setting). Overall autodesign are thus improved.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I471a2c45200894ca354c90b46b662f42414b48ad
tous les test marche et les jeu de tests aussi.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: If25b47aa10f97301fde7f17daa2a9478aed46db2
This will be used to compute the max total power for design per OMS.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I392f06c792af9f32d4a14324c683bd3fae655de8
This commit introduces new functions for converting between YANG formatted files and
legacy formats. The conversion processes adhere to RFC7951 for encoding YANG data.
Key changes include:
- Conversion of float and empty type representations.
- Transformation of Span and SI lists xx_power_range into dictionaries.
- Addition of necessary namespaces.
- use of oopt-gnpy-libyang to enforce compliancy to yang models
These utilities enable full compatibility with GNPy.
Co-authored-by: Renato Ambrosone <renato.ambrosone@polito.it>
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ia004113bca2b0631d1648564e5ccb60504fe80f8
But enable the user to still input its own default file with a new
'default_config_from_json' attribute useable in fixed and variable gain
amplifiers.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I773682ae6daa1025007fc051582e779986982838
Instead keep the None value, it user has not stated anything
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I45fcff92caabbfbe514fbe30deac60426b7eb16b
when user settings do not match library
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Id387b7781d9637f1d18c453dae75330962229902
explicitely check the corrections for all cases
ila defined in eqpt or not,
ila defined on the link with same direction as request or not
constraint loose or strict
several or one ila in the OMS
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I4d4b5167e7327c9aea4b13879f4e00d30e60d643
auto design were changed long ago and these functions did not
apply the changes. Besides there was a confusion between request_element
class where loose is a string, and PathRequest from topology.requests
where loose_list is a list of strings.
This patch corrects the naming and also the tests,
because it used the wrong class to gererate xls services
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I564b77576459d6cb47767398a2db8138ba6ad1e4
- read per degre roadm-path impairment from roadm sheet
add additional optional columns: type_variety and 'from degrees'
and 'from degree to degree impairment id'
'from degrees' can contain a list of degrees separated with ' | ', then the
'from degree to degree impairment id' must contain a list of ids of the same
length.
Impairment ids are expected to be in the ROADM equipment spec and
from degree must be the previous node (no verification of user input).
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I7d326bb3d4f366835249089e9537747c7d3ec2fd
An approximated version of the GGN is implemented to reduce the computational time enabling fast multi-band transmission simulations
Change-Id: I2951a878aa04b5eb4a33ba86d626a788c4cbb100
the automatic add_missing_elements function is updated to insert
multiband booster, preamp or inline amplifiers based on the OMS
nature. If nothing is stated, then uses Edfas.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I968a2fc0a3da97aecb7b513ff211491b20cdd4f2
Compute the tilts only if raman-flag in sim_params is turned on.
Use actual input power in fiber (according to expected propagation
during design).
Creates a function that computes the expected tilt after propagation
in a span, and returns the normalized power difference at the center
frequency of each band, and the tilt experenced between lower and
upper frequency in each band.
Include the expected tilt when computing target gains of amplifiers.
Current function requires that the bands remain in the same order.
(ordering is ensured when creating the objects).
Change-Id: I28bdf13f2010153175e8b6d199fd8eea15d7b292
make sure that selected amplifiers (single or multiband) have a band
that encompasses design_band.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I8b66755efbe8413f32328b9e02099ffdedd4b7ed
Introduce a design_band parameter in ROADM and Transceiver.
- if nothing is defined, use SI band(s)
- if design band is defined in ROADM, use this one for all degrees
- if per degree design band is defined, use this one instead
unsupported case: single band OMS with default multiband design band.
Check that these definitions are consistent with actual amplifiers
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Ibea4ce6e72d2b1e96ef8cf4efaf499530d24179c
Introduce a new multi-band element that contains a list of Edfa element:
- reads multiple amps out of the element config.
- deduces frequency band from the amp in the list.
no autodesign yet: multi-band amps must have type_variety.
- checks that type variety of individual EDFAs is consistent with multiband
type variety
- demux and mux spectrum when propagate in multiband
- don't add a preamp or booster if a multiband amp is already defined.
The print of channel number is removed from equipment, since the channel number
may now depend on the path's amplifiers. This changes invocation results layout.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I44e77ff82e622cdee4021a7984d660317cb90cf9
The commit introduces mux/demux functions in amps and ensures that the
propagation is only done on carriers that are in the Amp bandwitdh, ie
with all their spectrum including slot width is in bandwidth.
For consistency, default amp f_min is changed:
Objective is to use amplifiers' band to bound the possible frequencies
to be propagated. Since the current default f_min of Amp in json_io.py is
higher than the SI one, this would result in a different nb of channels
than currently used in tests, and a change in all tests. In order to
avoid this, I preferred to change this value and have consistency
between SI f_min and Amp f_min.
The commits adds a set of functions to make amps band the useable
spectrum on each OMS. Thee OMS generation is changed to use the amp band.
The commit adds filtering functions (demux and mux) to filter out spectrum
which is not in the amplifier band.
Spectrum assignment is also corrected to correctly match the amp bandwidth
constraint with guardband: center frequency index must be within the
usable part of the amp band. This changes a bit the notion of freq_index
and guardband in the functions, but this is transparent to user:
f_min, f_max represent the amp band, while self.freq_index_min/max
represent the center frequency boundary for a reference 50GHz channel.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I225b2b2dc0e1f1992c0460f6e08fa9c9bc641edf
redesign True means that network is redesigned using each request
as reference channel. When False it means that the design is made
once and successive propagation use the settings computed with this
design.
Default propogation is without redesign, so that path-request-script
must use the ----redesign-per-request option to behave as before this
commit.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I0084185106d14659a846136620cd17791d551a7d
Instead of copying the CLI script in API code, use functions shared
by CLI and API
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I3f9b30b8700b68237d0e80768db015d8dec3deb5
to be conformed with ietf + to prepare for next multiband case
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: If71857ef7dff9eaaa4c16e3837d3500bcef2fa72
gnpy currently uses the same parameter for tx output power and span
input power: this prevents from modelling low tx power effect.
This patch introduces a new tx-cannel-power and uses it to
propagate in ROADM.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Id3ac75e2cb617b513bdb38b51a52e05d15af46f5
This fixes error message for wrong trx type, catches the case of
KeyError when trx_type is not part of the library.
removes power setting from this function: power out of transceiver or
at the input of span is nor defined in equipment Transceiver
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I15fa7cc772ab5c1a8c7637738eb83c2ddffa1219
This commit introduces the 'type_variety' attribute for ROADM elements,
allowing the use of different types of ROADM specifications instead of
being limited to the default one.
If no type variety name is provided in the eqpt_config, the 'default'
name is used for backward compatibility with libraries. Additionally,
if no type variety is defined in the ROADM element in the topology,
the default one is used for backward compatibility with topologies.
The 'type_variety' attribute is included in the 'to_json' and
'display' methods for ROADM elements.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I61a2491f994e47ad0b08cf8eaef30d6d855aa706
- Replaced multiple calls to the span_loss function
with recording the span loss result in the fiber elements,
reducing computation time.
- Updated Raman gain estimation based on design target powers to ensure
accurate Edfa gain calculation or gain reduction during design.
- display the computed and design Raman gain in RamanFiber string output
- do not add padding on Raman fibers
- Added to_json function to preserve user input SimParams values,
which were previously overwritten by initializing SimParams
with fake values during design.
Next step is to allow users to balance computation time and
target accuracy of the design by inputing their own SimParams
and ref channels design values.
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: I1ca4954d0621858cefb3d776a538131992cae3e3
Before the Raman coefficient was normalized with respect the given effective area, instead of the reference.
Change-Id: I4c0547db4fbd0f823a9058022b93c1ca37d67b51
In tox v4, "reuse of environments" was disabled [1]. This is then later
explained [2] to refer to exactly that thing which we were using for
inheriting the dependencies from the top-level testenv all the way to
the docs build. That's why the docs build in GitHub CI started failing.
IMHO, The Correct Way™ of specifying what dependencies are used for
which feature are the so-called "extra dependencies". Once they are in
place, it is be possible to install gnpy via, e.g., `pip install
oopt-gnpy[docs]`. However, this process is (as far as I can tell)
incompatible with `requirements.txt`; all my attempts at using the
standard dependency syntax in that file have failed for me.
So, in order to make this happen, let's move all the dependencies from a
more-or-less ad-hoc collection of files to this declarative approach
right in setup.cfg. That way, the deps are listed on a single place, in
a declarative manner, and as a result, the installation is now a trivial
pip oneliner.
As a result, one can also remove that duplication of dependencies in
docs requirements.
[1] https://tox.wiki/en/4.11.4/upgrading.html#reuse-of-environments
[2] https://tox.wiki/en/4.11.4/upgrading.html#packaging-configuration-and-inheritance
Change-Id: I34aa0c71e993b39e2b805a7de40e133b4d290318
Fixes: 47c89626 fix docs requirements
- wrong parameter was used in parameter
- error message could not read 0-dimensional arrey for 0 and -1 element
- add a test that makes use of the feature
Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com>
Change-Id: Id7f6d6766d5b91a4b9410ad23aaa5e472b8ebb6f
