mirror of
https://github.com/Telecominfraproject/oopt-gnpy.git
synced 2025-10-29 09:12:37 +00:00
56e615c713
Correctly uses the oms band and spacing for computing the nb of channel and total power for design per band. In order to keep the SI values as reference, introduce a new parameter in SI to indicate wether to use this feature or not. If "use_si_channel_count_for_design": true, then the f_min, f_max and spacing from SI are used for all OMSes else, the f_min, f_max, spacing defined per OMS (design_bands) is used. This impacts tests where the artificial C-band boudaries were hardcoded, and it also has an impact on performances when SI's defined nb of channels is larger than the one defined per OMS. In this case the design was considering a larger total power than the one finally propagated which resulted in reduced performance. This feature now corrects this case (if "use_si_channel_count_for_design": false which is the default setting). Overall autodesign are thus improved. Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com> Change-Id: I471a2c45200894ca354c90b46b662f42414b48ad tous les test marche et les jeu de tests aussi. Signed-off-by: EstherLerouzic <esther.lerouzic@orange.com> Change-Id: If25b47aa10f97301fde7f17daa2a9478aed46db2
17 KiB
17 KiB
User input for spectrum used for propagation instead of SI
Power mode is set to True
=> it can be modified in eqpt_config.json - Span
There are 15 fiber spans over 1200 km between Site_A and Site_B
Now propagating between Site_A and Site_B:
Reference used for design: (Input optical power reference in span = 0.00dBm,
spacing = 50.00GHz
nb_channels = None)
Channels propagating: (Input optical power deviation in span = mode_1: 0.00, mode_2: 0.00dB,
spacing = mode_1: 50.00, mode_2: 75.00GHz,
transceiver output power = mode_1: 0.00, mode_2: 0.00dBm,
nb_channels = 60)
Input optical power reference in span = 0.00 dBm:
Transceiver Site_A
GSNR (0.1nm, dB): mode_1: 40.00, mode_2: 40.00
GSNR (signal bw, dB): mode_1: 35.92, mode_2: 32.91
OSNR ASE (0.1nm, dB): mode_1: 40.00, mode_2: 40.00
OSNR ASE (signal bw, dB): mode_1: 35.92, mode_2: 32.91
CD (ps/nm): 0.00
PMD (ps): 0.00
PDL (dB): 0.00
Latency (ms): 0.00
Actual pch out (dBm): mode_1: 0.00, mode_2: 0.00
Roadm roadm Site A
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.00, mode_2: 18.24
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster A
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span1
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.22
Edfa Edfa1
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span2
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.21
Edfa Edfa2
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Fiber Span3
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.97, mode_2: -14.20
Edfa Edfa3
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.64
Power Out (dBm): 18.64
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.04, mode_2: 1.80
output VOA (dB): 0.00
Fiber Span4
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.96, mode_2: -14.19
Edfa Edfa4
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.65
Power Out (dBm): 18.65
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.05, mode_2: 1.81
output VOA (dB): 0.00
Fiber Span5
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.95, mode_2: -14.18
Edfa Edfa5
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.66
Power Out (dBm): 18.66
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.05, mode_2: 1.82
output VOA (dB): 0.00
Roadm roadm Site C
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.05, mode_2: 20.06
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster C
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span6
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.23
Edfa Edfa6
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span7
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.21
Edfa Edfa7
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Fiber Span8
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.97, mode_2: -14.20
Edfa Edfa8
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.64
Power Out (dBm): 18.64
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.04, mode_2: 1.80
output VOA (dB): 0.00
Fiber Span9
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.96, mode_2: -14.19
Edfa Edfa9
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.65
Power Out (dBm): 18.65
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.04, mode_2: 1.81
output VOA (dB): 0.00
Fiber Span10
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.95, mode_2: -14.18
Edfa Edfa10
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.66
Power Out (dBm): 18.66
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.05, mode_2: 1.82
output VOA (dB): 0.00
Roadm roadm Site D
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.05, mode_2: 20.06
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster D
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span11
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.23
Edfa Edfa11
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span12
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.21
Edfa Edfa12
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Roadm roadm Site E
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.03, mode_2: 20.03
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster E
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span13
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.23
Edfa Edfa13
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span14
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.22
Edfa Edfa14
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Fiber Span15
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.97, mode_2: -14.20
Edfa Edfa15
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.64
Power Out (dBm): 18.64
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.80
output VOA (dB): 0.00
Roadm roadm Site B
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.03, mode_2: 20.04
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Transceiver Site_B
GSNR (0.1nm, dB): mode_1: 18.02, mode_2: 20.22
GSNR (signal bw, dB): mode_1: 13.94, mode_2: 13.12
OSNR ASE (0.1nm, dB): mode_1: 19.69, mode_2: 21.35
OSNR ASE (signal bw, dB): mode_1: 15.61, mode_2: 14.26
CD (ps/nm): 20040.00
PMD (ps): 1.39
PDL (dB): 0.00
Latency (ms): 5.88
Actual pch out (dBm): mode_1: 0.00, mode_2: 0.00
Transmission result for input optical power reference in span = 0.00 dBm:
Final GSNR (0.1 nm): 18.94 dB
(No source node specified: picked Site_A)
(No destination node specified: picked Site_B)
Power mode is set to True
=> it can be modified in eqpt_config.json - Span
There are 15 fiber spans over 1200 km between Site_A and Site_B
Now propagating between Site_A and Site_B:
Reference used for design: (Input optical power reference in span = 0.00dBm,
spacing = 50.00GHz
nb_channels = None)
Channels propagating: (Input optical power deviation in span = mode_1: 0.00, mode_2: 0.00dB,
spacing = mode_1: 50.00, mode_2: 75.00GHz,
transceiver output power = mode_1: 0.00, mode_2: 0.00dBm,
nb_channels = 60)
Input optical power reference in span = 0.00 dBm:
Transceiver Site_A
GSNR (0.1nm, dB): mode_1: 40.00, mode_2: 40.00
GSNR (signal bw, dB): mode_1: 35.92, mode_2: 32.91
OSNR ASE (0.1nm, dB): mode_1: 40.00, mode_2: 40.00
OSNR ASE (signal bw, dB): mode_1: 35.92, mode_2: 32.91
CD (ps/nm): 0.00
PMD (ps): 0.00
PDL (dB): 0.00
Latency (ms): 0.00
Actual pch out (dBm): mode_1: 0.00, mode_2: 0.00
Roadm roadm Site A
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.00, mode_2: 18.24
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster A
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span1
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.22
Edfa Edfa1
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span2
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.21
Edfa Edfa2
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Fiber Span3
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.97, mode_2: -14.20
Edfa Edfa3
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.64
Power Out (dBm): 18.64
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.04, mode_2: 1.80
output VOA (dB): 0.00
Fiber Span4
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.96, mode_2: -14.19
Edfa Edfa4
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.65
Power Out (dBm): 18.65
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.05, mode_2: 1.81
output VOA (dB): 0.00
Fiber Span5
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.95, mode_2: -14.18
Edfa Edfa5
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.66
Power Out (dBm): 18.66
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.05, mode_2: 1.82
output VOA (dB): 0.00
Roadm roadm Site C
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.05, mode_2: 20.06
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster C
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span6
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.23
Edfa Edfa6
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span7
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.21
Edfa Edfa7
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Fiber Span8
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.97, mode_2: -14.20
Edfa Edfa8
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.64
Power Out (dBm): 18.64
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.04, mode_2: 1.80
output VOA (dB): 0.00
Fiber Span9
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.96, mode_2: -14.19
Edfa Edfa9
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.65
Power Out (dBm): 18.65
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.04, mode_2: 1.81
output VOA (dB): 0.00
Fiber Span10
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.95, mode_2: -14.18
Edfa Edfa10
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.66
Power Out (dBm): 18.66
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.05, mode_2: 1.82
output VOA (dB): 0.00
Roadm roadm Site D
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.05, mode_2: 20.06
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster D
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span11
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.23
Edfa Edfa11
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span12
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.21
Edfa Edfa12
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Roadm roadm Site E
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.03, mode_2: 20.03
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Edfa booster E
type_variety: std_medium_gain
effective gain(dB): 20.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.58
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): -1.40
Power Out (dBm): 18.61
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.01, mode_2: 1.77
output VOA (dB): 0.00
Fiber Span13
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.99, mode_2: -14.23
Edfa Edfa13
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.62
Power Out (dBm): 18.62
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.02, mode_2: 1.78
output VOA (dB): 0.00
Fiber Span14
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.98, mode_2: -14.22
Edfa Edfa14
type_variety: test_fixed_gain
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 9.00
(including att_in)
pad att_in (dB): 4.00
Power In (dBm): 2.63
Power Out (dBm): 18.63
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.79
output VOA (dB): 0.00
Fiber Span15
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 16.00
(includes conn loss (dB) in: 0.00 out: 0.00)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -16.00
actual pch out (dBm): mode_1: -15.97, mode_2: -14.20
Edfa Edfa15
type_variety: test
effective gain(dB): 16.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 8.86
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 2.64
Power Out (dBm): 18.64
Delta_P (dB): 0.00
target pch (dBm): 0.00
actual pch out (dBm): mode_1: 0.03, mode_2: 1.80
output VOA (dB): 0.00
Roadm roadm Site B
Type_variety: default
Reference loss (dB): 20.00
Actual loss (dB): mode_1: 20.03, mode_2: 20.04
Reference pch out (dBm): -20.00
Actual pch out (dBm): mode_1: -20.00, mode_2: -18.24
Transceiver Site_B
GSNR (0.1nm, dB): mode_1: 18.02, mode_2: 20.22
GSNR (signal bw, dB): mode_1: 13.94, mode_2: 13.12
OSNR ASE (0.1nm, dB): mode_1: 19.69, mode_2: 21.35
OSNR ASE (signal bw, dB): mode_1: 15.61, mode_2: 14.26
CD (ps/nm): 20040.00
PMD (ps): 1.39
PDL (dB): 0.00
Latency (ms): 5.88
Actual pch out (dBm): mode_1: 0.00, mode_2: 0.00
Transmission result for input optical power reference in span = 0.00 dBm:
Final GSNR (0.1 nm): 18.94 dB
(No source node specified: picked Site_A)
(No destination node specified: picked Site_B)