mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 09:32:34 +00:00
qca-wifi-7: add support for EMPLUS WAP7635
Signed-off-by: Jesse Wu <Jesse.Wu@emplustech.com>
This commit is contained in:
Jesse Wu
@@ -43,6 +43,11 @@ $(call Package/ath12k-wifi-default)
|
||||
TITLE:=board-2.bin for EAP105
|
||||
endef
|
||||
|
||||
define Package/ath12k-wifi-emplus-wap7635
|
||||
$(call Package/ath12k-wifi-default)
|
||||
TITLE:=board-2.bin for WAP7635
|
||||
endef
|
||||
|
||||
define Package/ath12k-wifi-sonicfi-rap7110c-341x
|
||||
$(call Package/ath12k-wifi-default)
|
||||
TITLE:=board-2.bin for RAP7710c_341x
|
||||
@@ -107,6 +112,13 @@ define Package/ath12k-wifi-edgecore-eap105/install
|
||||
$(INSTALL_DATA) ./board-2.bin.eap105.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
|
||||
endef
|
||||
|
||||
define Package/ath12k-wifi-emplus-wap7635/install
|
||||
$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
|
||||
$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
|
||||
$(INSTALL_DATA) ./board-2.bin.wap7635.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
|
||||
$(INSTALL_DATA) ./board-2.bin.wap7635.QCN6274 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
|
||||
endef
|
||||
|
||||
define Package/ath12k-wifi-sonicfi-rap7110c-341x/install
|
||||
$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
|
||||
$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
|
||||
@@ -188,6 +200,7 @@ endef
|
||||
|
||||
$(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
|
||||
$(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
|
||||
$(eval $(call BuildPackage,ath12k-wifi-emplus-wap7635))
|
||||
$(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
|
||||
$(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-h))
|
||||
$(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-s))
|
||||
|
||||
BIN
feeds/qca-wifi-7/ath12k-wifi/board-2.bin.wap7635.IPQ5332
Normal file
BIN
feeds/qca-wifi-7/ath12k-wifi/board-2.bin.wap7635.IPQ5332
Normal file
Binary file not shown.
BIN
feeds/qca-wifi-7/ath12k-wifi/board-2.bin.wap7635.QCN6274
Normal file
BIN
feeds/qca-wifi-7/ath12k-wifi/board-2.bin.wap7635.QCN6274
Normal file
Binary file not shown.
@@ -7,6 +7,11 @@ board_config_update
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
emplus,wap7635)
|
||||
ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
|
||||
ucidef_set_led_default "ledg" "LEDG" "sys:green" "off"
|
||||
ucidef_set_led_default "ledr" "LEDR" "sys:red" "off"
|
||||
;;
|
||||
sercomm,ap72tip-v4|\
|
||||
sercomm,ap72tip)
|
||||
ucidef_set_led_default "power" "POWER" "blue:status" "on"
|
||||
|
||||
@@ -32,6 +32,7 @@ ipq53xx_setup_interfaces()
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
|
||||
;;
|
||||
emplus,wap7635|\
|
||||
sercomm,ap72tip-v4)
|
||||
ucidef_set_interface_wan "eth0"
|
||||
;;
|
||||
@@ -104,6 +105,7 @@ qcom_setup_macs()
|
||||
ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
|
||||
ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
|
||||
;;
|
||||
emplus,wap7635|\
|
||||
sercomm,ap72tip-v4)
|
||||
wan_mac=$(cat /sys/class/net/eth0/address)
|
||||
ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
|
||||
|
||||
@@ -64,6 +64,7 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
|
||||
cig,wf189h|\
|
||||
cig,wf189|\
|
||||
edgecore,eap105|\
|
||||
emplus,wap7635|\
|
||||
sercomm,ap72tip-v4|\
|
||||
sercomm,ap72tip|\
|
||||
zyxel,nwa130be)
|
||||
@@ -86,6 +87,7 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
|
||||
case "$board" in
|
||||
cig,wf189|\
|
||||
edgecore,eap105|\
|
||||
emplus,wap7635|\
|
||||
sercomm,ap72tip-v4|\
|
||||
sercomm,ap72tip|\
|
||||
zyxel,nwa130be)
|
||||
|
||||
@@ -136,7 +136,8 @@ platform_do_upgrade() {
|
||||
sercomm,ap72tip|\
|
||||
cig,wf189w|\
|
||||
cig,wf189h|\
|
||||
cig,wf189)
|
||||
cig,wf189|\
|
||||
emplus,wap7635)
|
||||
if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
|
||||
CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
|
||||
CI_BOOTCFG=1
|
||||
|
||||
413
feeds/qca-wifi-7/ipq53xx/dts/ipq5332-emplus-wap7635.dts
Normal file
413
feeds/qca-wifi-7/ipq53xx/dts/ipq5332-emplus-wap7635.dts
Normal file
@@ -0,0 +1,413 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* IPQ5332 RDP468 board device tree source
|
||||
*
|
||||
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "ipq5332.dtsi"
|
||||
#include "ipq5332-default-memory.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Emplus WAP7635";
|
||||
compatible = "emplus,wap7635", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart0; /*console*/
|
||||
ethernet0 = "/soc/dp1";
|
||||
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
soc@0 {
|
||||
mdio:mdio@90000 {
|
||||
pinctrl-0 = <&mdio1_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
|
||||
phyaddr_fixup = <0xC90F018>;
|
||||
uniphyaddr_fixup = <0xC90F014>;
|
||||
mdio_clk_fixup; /* MDIO clock sequence fix up flag */
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <24>;
|
||||
};
|
||||
};
|
||||
|
||||
ess-instance {
|
||||
/*num_devices = <0x1>;*/
|
||||
ess-switch@3a000000 {
|
||||
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
|
||||
switch_lan_bmp = <0x2>; /* lan port bitmap */
|
||||
switch_wan_bmp = <0>; /* wan port bitmap */
|
||||
switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
|
||||
switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
|
||||
switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@0 {
|
||||
port_id = <1>;
|
||||
phy_address = <24>;
|
||||
mdiobus = <&mdio>;
|
||||
ethernet-phy-ieee802.3-c45;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dp1 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,nss-dp";
|
||||
qcom,id = <1>;
|
||||
reg = <0x3a500000 0x4000>;
|
||||
qcom,mactype = <1>;
|
||||
local-mac-address = [000000000000];
|
||||
mdio-bus = <&mdio>;
|
||||
qcom,phy-mdio-addr = <24>;
|
||||
qcom,link-poll = <1>;
|
||||
phy-mode = "sgmii";
|
||||
/* phy-mode = "usxgmii"; */
|
||||
};
|
||||
|
||||
/* EDMA host driver configuration for the board */
|
||||
edma@3ab00000 {
|
||||
qcom,txdesc-ring-start = <4>; /* Tx desc ring start ID */
|
||||
qcom,txdesc-rings = <12>; /* Total number of Tx desc rings to be provisioned */
|
||||
qcom,mht-txdesc-rings = <8>; /* Extra Tx desc rings to be provisioned for MHT SW ports */
|
||||
qcom,txcmpl-ring-start = <4>; /* Tx complete ring start ID */
|
||||
qcom,txcmpl-rings = <12>; /* Total number of Tx complete rings to be provisioned */
|
||||
qcom,mht-txcmpl-rings = <8>; /* Extra Tx complete rings to be provisioned for mht sw ports. */
|
||||
qcom,rxfill-ring-start = <4>; /* Rx fill ring start ID */
|
||||
qcom,rxfill-rings = <4>; /* Total number of Rx fill rings to be provisioned */
|
||||
qcom,rxdesc-ring-start = <12>; /* Rx desc ring start ID */
|
||||
qcom,rxdesc-rings = <4>; /* Total number of Rx desc rings to be provisioned */
|
||||
qcom,rx-page-mode = <0>; /* Rx fill ring page mode */
|
||||
qcom,tx-map-priority-level = <1>; /* Tx priority level per port */
|
||||
qcom,rx-map-priority-level = <1>; /* Rx priority level per core */
|
||||
qcom,ppeds-num = <2>; /* Number of PPEDS nodes */
|
||||
|
||||
/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
|
||||
qcom,ppeds-map = <1 1 1 1 32 8>, /* PPEDS Node#0 ring and queue map */
|
||||
<2 2 2 2 40 8>; /* PPEDS Node#1 ring and queue map */
|
||||
qcom,txdesc-map = <8 9 10 11>, /* Port0 per-core Tx ring map */
|
||||
<12 13 14 15>, /* MHT-Port1 per-core Tx ring map */
|
||||
<4 5 6 7>, /* MHT-Port2 per-core Tx ring map/packets from vp*/
|
||||
<16 17 18 19>, /* MHT-Port3 per-core Tx ring map */
|
||||
<20 21 22 23>; /* MHT-Port4 per-core Tx ring map */
|
||||
qcom,txdesc-fc-grp-map = <1 2 3 4 5>; /* Per GMAC flow control group map */
|
||||
qcom,rxfill-map = <4 5 6 7>; /* Per-core Rx fill ring map */
|
||||
qcom,rxdesc-map = <12 13 14 15>; /* Per-core Rx desc ring map */
|
||||
qcom,rx-queue-start = <0>; /* Rx queue start */
|
||||
qcom,rx-ring-queue-map = <0 8 16 24>, /* Priority 0 queues per-core Rx ring map */
|
||||
<1 9 17 25>, /* Priority 1 queues per-core Rx ring map */
|
||||
<2 10 18 26>, /* Priority 2 queues per-core Rx ring map */
|
||||
<3 11 19 27>, /* Priority 3 queues per-core Rx ring map */
|
||||
<4 12 20 28>, /* Priority 4 queues per-core Rx ring map */
|
||||
<5 13 21 29>, /* Priority 5 queues per-core Rx ring map */
|
||||
<6 14 22 30>, /* Priority 6 queues per-core Rx ring map */
|
||||
<7 15 23 31>; /* Priority 7 queues per-core Rx ring map */
|
||||
interrupts = <0 163 4>, /* Tx complete ring id #4 IRQ info */
|
||||
<0 164 4>, /* Tx complete ring id #5 IRQ info */
|
||||
<0 165 4>, /* Tx complete ring id #6 IRQ info */
|
||||
<0 166 4>, /* Tx complete ring id #7 IRQ info */
|
||||
<0 167 4>, /* Tx complete ring id #8 IRQ info */
|
||||
<0 168 4>, /* Tx complete ring id #9 IRQ info */
|
||||
<0 169 4>, /* Tx complete ring id #10 IRQ info */
|
||||
<0 170 4>, /* Tx complete ring id #11 IRQ info */
|
||||
<0 171 4>, /* Tx complete ring id #12 IRQ info */
|
||||
<0 172 4>, /* Tx complete ring id #13 IRQ info */
|
||||
<0 173 4>, /* Tx complete ring id #14 IRQ info */
|
||||
<0 174 4>, /* Tx complete ring id #15 IRQ info */
|
||||
<0 139 4>, /* Rx desc ring id #12 IRQ info */
|
||||
<0 140 4>, /* Rx desc ring id #13 IRQ info */
|
||||
<0 141 4>, /* Rx desc ring id #14 IRQ info */
|
||||
<0 142 4>, /* Rx desc ring id #15 IRQ info */
|
||||
<0 191 4>, /* Misc error IRQ info */
|
||||
<0 155 4>, /* RxFill ring id #4 IRQ info */
|
||||
<0 156 4>, /* RxFill ring id #5 IRQ info */
|
||||
<0 157 4>, /* RxFill ring id #6 IRQ info */
|
||||
<0 158 4>, /* RxFill ring id #7 IRQ info */
|
||||
<0 160 4>, /* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
|
||||
<0 128 4>, /* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
|
||||
<0 152 4>, /* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
|
||||
<0 161 4>, /* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
|
||||
<0 129 4>, /* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
|
||||
<0 153 4>, /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
|
||||
<0 175 4>, /* MHT port Tx complete ring id #16 IRQ info */
|
||||
<0 176 4>, /* MHT port Tx complete ring id #17 IRQ info */
|
||||
<0 177 4>, /* MHT port Tx complete ring id #18 IRQ info */
|
||||
<0 178 4>, /* MHT port Tx complete ring id #19 IRQ info */
|
||||
<0 179 4>, /* MHT port Tx complete ring id #20 IRQ info */
|
||||
<0 180 4>, /* MHT port Tx complete ring id #21 IRQ info */
|
||||
<0 181 4>, /* MHT port Tx complete ring id #22 IRQ info */
|
||||
<0 182 4>; /* MHT port Tx complete ring id #23 IRQ info */
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_blue: led@34 {
|
||||
label = "sys:blue";
|
||||
gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
led_power_green: led@35 {
|
||||
label = "sys:green";
|
||||
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
led_power_red: led@37 {
|
||||
label = "sys:red";
|
||||
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
button@1 {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <1>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
wsi: wsi {
|
||||
id = <0>;
|
||||
num_chip = <2>;
|
||||
status = "okay";
|
||||
chip_info = <0 1 1>,
|
||||
<1 1 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
|
||||
qcom,rproc = <&q6_wcss_pd1>;
|
||||
qcom,rproc_rpd = <&q6v5_wcss>;
|
||||
qcom,multipd_arch;
|
||||
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
|
||||
memory-region = <&q6_region>;
|
||||
qcom,wsi = <&wsi>;
|
||||
qcom,wsi_index = <0>;
|
||||
qcom,board_id = <0x16>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mhi_region1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qcn9224_pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* QCN9224 5G+6G */
|
||||
&wifi4 {
|
||||
hremote_node = <&qcn9224_pcie1>;
|
||||
board_id = <0x1019>;
|
||||
node_id = <0x1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_uart0 {
|
||||
pinctrl-0 = <&serial_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
pinctrl-0 = <&serial_1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdhc {
|
||||
bus-width = <4>;
|
||||
max-frequency = <192000000>;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-0 = <&sdc_default_state>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&xo {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
pinctrl-0 = <&qspi_default_state>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nandcs@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1_phy_x2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
pinctrl-0 = <&pcie1_default_state>;
|
||||
pinctrl-names = "default";
|
||||
perst-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
pcie1_rp {
|
||||
reg = <0 0 0 0 0>;
|
||||
|
||||
qcom,mhi@1 {
|
||||
reg = <0 0 0 0 0>;
|
||||
boot-args = <0x2 0x4 0x34 0x3 0x0 0x0 /* MX Rail, GPIO52, Drive strength 0x3 */
|
||||
0x4 0x4 0x18 0x3 0x0 0x0 /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
|
||||
0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
|
||||
memory-region = <&qcn9224_pcie1>;
|
||||
qcom,wsi = <&wsi>;
|
||||
qcom,wsi_index = <1>;
|
||||
qcom,board_id = <0x1019>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* PINCTRL */
|
||||
|
||||
&tlmm {
|
||||
sdc_default_state: sdc-default-state {
|
||||
clk-pins {
|
||||
pins = "gpio13";
|
||||
function = "sdc_clk";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "gpio12";
|
||||
function = "sdc_cmd";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
function = "sdc_data";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_data_clk_pins: spi-0-data-clk-state {
|
||||
pins = "gpio14", "gpio15", "gpio16";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi_0_cs_pins: spi-0-cs-state {
|
||||
pins = "gpio17";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
qspi_default_state: qspi-default-state {
|
||||
qspi_clock {
|
||||
pins = "gpio13";
|
||||
function = "qspi_clk";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
qspi_cs {
|
||||
pins = "gpio12";
|
||||
function = "qspi_cs";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
qspi_data {
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
function = "qspi_data";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
serial_1_pins: serial1-pinmux { /*ble*/
|
||||
pins = "gpio33", "gpio35";
|
||||
function = "blsp1_uart2";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
button_pins: button-state {
|
||||
pins = "gpio24";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pcie1_default_state: pcie1-default-state {
|
||||
pins = "gpio45";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
&license_manager {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
qcom,multiplexed-phy;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&hs_m31phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hs_m31phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssuniphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -52,6 +52,19 @@ define Device/edgecore_eap105
|
||||
endef
|
||||
TARGET_DEVICES += edgecore_eap105
|
||||
|
||||
define Device/emplus_wap7635
|
||||
DEVICE_TITLE := EMPLUS WAP7635
|
||||
DEVICE_DTS := ipq5332-emplus-wap7635
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_DTS_CONFIG := config@mi01.6
|
||||
IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
|
||||
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
||||
IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
|
||||
IMAGE/nand-factory.ubi := append-ubi
|
||||
DEVICE_PACKAGES := ath12k-wifi-emplus-wap7635 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
|
||||
endef
|
||||
TARGET_DEVICES += emplus_wap7635
|
||||
|
||||
define Device/sonicfi_rap7110c_341x
|
||||
DEVICE_TITLE := SONICFI RAP7110C-341X
|
||||
DEVICE_DTS := ipq5332-sonicfi-rap7110c-341x
|
||||
|
||||
22
profiles/emplus_wap7635.yml
Normal file
22
profiles/emplus_wap7635.yml
Normal file
@@ -0,0 +1,22 @@
|
||||
---
|
||||
profile: emplus_wap7635
|
||||
target: ipq53xx
|
||||
subtarget: generic
|
||||
description: Build image for the EMPLUS WAP7635
|
||||
image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-emplus_wap7635-squashfs-sysupgrade.tar
|
||||
feeds:
|
||||
- name: qca
|
||||
path: ../../feeds/qca-wifi-7
|
||||
include:
|
||||
- ucentral-ap
|
||||
packages:
|
||||
- ipq53xx
|
||||
- qca-ssdk-shell
|
||||
- iperf3
|
||||
- jq
|
||||
- sysstat
|
||||
- tree
|
||||
diffconfig: |
|
||||
CONFIG_KERNEL_IPQ_MEM_PROFILE=0
|
||||
CONFIG_BUSYBOX_CUSTOM=y
|
||||
CONFIG_BUSYBOX_CONFIG_PSTREE=y
|
||||
Reference in New Issue
Block a user