ipq807x: various improvements to cig,wf660a

Fixes: WIFI-12592
Signed-off-by: John Crispin <john@phrozen.org>

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -60,7 +60,7 @@ qcom_setup_interfaces()
 		ucidef_set_interface_wan "eth0"
 		;;
        cig,wf660a)
-                ucidef_set_interface_lan "eth0"		
+                ucidef_set_interface_wan "eth0"		
 		;;
        cig,wf186w)
                 ucidef_set_interface_lan "eth1"		
@@ -134,6 +134,15 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	cig,wf660a)
+		mmc_dev=$(echo $(find_mmc_part "0:APPSBLENV") | sed 's/^.\{5\}//')
+		[ -z mmc_dev ] && return
+		mac=$(grep BaseMacAddress= /dev/$mmc_dev | cut -dx -f2)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ip link set eth0 address $wan_mac
+		;;
 	cybertan,eww622-a1)
 	        mac=$(grep -i -m 1 mac_addr_base= /dev/`cat /proc/mtd | grep devinfo | cut -d: -f1` | cut -d= -f2)
 	        [ -z "$mac"] && mac="00:11:22:33:44:55"

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -44,7 +44,7 @@ do_flash_emmc() {
 		return
 	}
 
-	echo erase $4
+	echo erase $4 / $emmcblock
 	dd if=/dev/zero of=${emmcblock} 2> /dev/null
 	echo flash $4
 	tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a-cp01.dtsi

@@ -17,6 +17,7 @@
 #include "qcom-ipq6018.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	#address-cells = <0x2>;
@@ -38,6 +39,11 @@
 		ethernet2 = "/soc/dp3";
 		ethernet3 = "/soc/dp4";
 		ethernet4 = "/soc/dp5";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -227,27 +233,6 @@
 		};
 	};
 
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_usb0 {
-			pins = "gpio50";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
 	hsuart_pins: hsuart_pins {
 		mux {
 			pins = "gpio71", "gpio72";
@@ -298,11 +283,12 @@
 };
 
 &soc {
-	pwm {
+	pwm0: pwm {
                 pinctrl-0 = <&pwm_pins>;
                 pinctrl-names = "default";
                 used-pwm-indices = <1>, <1>, <1>, <0>;
                 status = "ok";
+		#pwm-cells = <2>;
         };
 	extcon_usb: extcon_usb {
 		pinctrl-0 = <&extcon_usb_pins>;
@@ -454,28 +440,25 @@
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
+	pwmleds {
+		compatible = "pwm-leds";
 
-		led@35 {
-			label = "led_5g";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_5g";
-			default-state = "off";
+		led_power: led1 {
+			label = "blue:status";
+			pwms = <&pwm0 0 5000>;
+			max-brightness = <255>;
 		};
-		led@37 {
-			label = "led_2g";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_2g";
-			default-state = "off";
+
+		led2 {
+			label = "green:status";
+			pwms = <&pwm0 1 5000>;
+			max-brightness = <255>;
 		};
-		led@50 {
-			label = "led_usb0";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usb-host";
-			default-state = "off";
+
+		led3 {
+			label = "red:status";
+			pwms = <&pwm0 2 5000>;
+			max-brightness = <255>;
 		};
 	};
 

feeds/tip/certificates/files/etc/init.d/certificates

@@ -30,12 +30,18 @@ boot() {
 			[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
 		fi
 	fi
+	
+	case "$(board_name)" in
+	cig,wf660a)
+		mmc_dev=$(echo $(find_mmc_part "0:ETHPHYFW") | sed 's/^.\{5\}//')
+		[ -n $mmc_dev ] && mount -t ext4 /dev/$mmc_dev /certificates
+		;;
+	esac
+
 	copy_certificates
 
 	# if we get here no valid certificates were found
 
-	. /lib/functions.sh
-
 	local PART_NAME
 
 	case "$(board_name)" in

patches/ipq807x/0008-Add-fw_printenv-support-for-EMMC.patch

@@ -1,12 +1,13 @@
-From 3353a474f9cda9a61101c7f57cec2b991503c73e Mon Sep 17 00:00:00 2001
+From 7d2818e1e1b49b9172c66171e9a96f4cdb9418ff Mon Sep 17 00:00:00 2001
 From: Ken <xshi@actiontec.com>
 Date: Tue, 7 Feb 2023 14:39:52 +0800
-Subject: [PATCH] Add fw_printenv support for EMMC
+Subject: [PATCH 1/9] Add fw_printenv support for EMMC
 
 ---
  package/base-files/files/lib/functions.sh | 13 ++++++++++++
+ package/boot/uboot-envtools/files/ipq60xx | 24 +++++++++++++++++++----
  package/boot/uboot-envtools/files/ipq807x | 24 +++++++++++++++++++----
- 2 files changed, 33 insertions(+), 4 deletions(-)
+ 3 files changed, 53 insertions(+), 8 deletions(-)
 
 diff --git a/package/base-files/files/lib/functions.sh b/package/base-files/files/lib/functions.sh
 index 2bad45324f..415e0763ed 100644
@@ -32,8 +33,49 @@ index 2bad45324f..415e0763ed 100644
  append() {
  	local var="$1"
  	local value="$2"
+diff --git a/package/boot/uboot-envtools/files/ipq60xx b/package/boot/uboot-envtools/files/ipq60xx
+index 84ed73f288..8863df4225 100644
+--- a/package/boot/uboot-envtools/files/ipq60xx
++++ b/package/boot/uboot-envtools/files/ipq60xx
+@@ -13,16 +13,32 @@ ubootenv_mtdinfo () {
+ 	mtd_size=$(echo $UBOOTENV_PART | awk '{print "0x"$2}')
+ 	mtd_erase=$(echo $UBOOTENV_PART | awk '{print "0x"$3}')
+ 	nor_flash=$(find /sys/bus/spi/devices/*/mtd -name ${mtd_dev})
+-
+-	if [ -n "$nor_flash" ]; then
++    	found_emmc=0
++    
++         if [ -z "$UBOOTENV_PART" ]; then
++                mtd_dev=$(echo $(find_mmc_part "0:APPSBLENV") | sed 's/^.\{5\}//')
++                if [ -n "$mtd_dev" ]; then
++                        EMMC_UBOOTENV_PART=$(cat /proc/partitions | grep $mtd_dev)
++                        #convert block to bytes
++                        emmc_ubootenv_size=`expr $(echo $EMMC_UBOOTENV_PART | awk '{print $3}') \* 1024`
++                        ubootenv_size=0x`printf "%x" $emmc_ubootenv_size`
++			found_emmc=1
++                fi
++                mtd_erase=""
++        
++	elif [ -n "$nor_flash" ]; then
+ 		ubootenv_size=$mtd_size
+ 	else
+ 		# size is fixed to 0x40000 in u-boot
+ 		ubootenv_size=0x40000
+ 	fi
++	if [ $found_emmc -eq 0 ]; then
++                sectors=$(printf '0x%x' $(( $ubootenv_size / $mtd_erase )))
++                echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors
++	else
++                echo /dev/$mtd_dev 0x0 $ubootenv_size
++	fi
+ 
+-	sectors=$(( $ubootenv_size / $mtd_erase ))
+-	echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors
+ }
+ 
+ case "$board" in
 diff --git a/package/boot/uboot-envtools/files/ipq807x b/package/boot/uboot-envtools/files/ipq807x
-index 84ed73f288..539cafb3fd 100644
+index 2dcd294964..8863df4225 100644
 --- a/package/boot/uboot-envtools/files/ipq807x
 +++ b/package/boot/uboot-envtools/files/ipq807x
 @@ -13,16 +13,32 @@ ubootenv_mtdinfo () {