mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-29 17:42:41 +00:00
ramips: add yuncore fap640 support
Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin
301
patches/ramips/0017-ramips-add-support-for-YunCore-FAP640.patch
Normal file
301
patches/ramips/0017-ramips-add-support-for-YunCore-FAP640.patch
Normal file
@@ -0,0 +1,301 @@
|
||||
From dbd1fbf93aa42f4bd69ec6af4c4741229f5d7005 Mon Sep 17 00:00:00 2001
|
||||
From: Volodymyr Puiul <volodymyr.puiul@gmail.com>
|
||||
Date: Thu, 8 Dec 2022 15:20:40 +0100
|
||||
Subject: [PATCH] ramips: add support for YunCore FAP640
|
||||
|
||||
It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A.
|
||||
|
||||
Specifications:
|
||||
- SoC: MT7621AT (880MHz, 2 Cores)
|
||||
- RAM: 128 MB
|
||||
- Flash: 16 MB SPI
|
||||
- Wi-Fi:
|
||||
- MT7915DN + MT7905DAN: 2.4/5 GHz
|
||||
- Ethernet: 5x1GiE via MT7530, 1xWAN with POE and 4xLAN
|
||||
- UART: J4 (115200 baud)
|
||||
- Pinout: [3V3] (TXD) (RXD) (GND)
|
||||
- Power: 802.11af/at PoE;
|
||||
|
||||
- Bootloader: U-Boot
|
||||
- Buttons:
|
||||
- Reset
|
||||
- LEDs:
|
||||
- Status - RGB controlled by
|
||||
- GPIO 14 LOW - green color
|
||||
- GPIO 15 LOW- red color
|
||||
- GPIO 16 LOW - blue color
|
||||
- WAN - gren color, controlled by switch GPIO 12 LOW
|
||||
- LAN1 - gren color, controlled by switch GPIO 9 HIGH
|
||||
- LAN2 - gren color, controlled by switch GPIO 6 LOW
|
||||
- LAN3 - gren color, controlled by switch GPIO 3 LOW
|
||||
- LAN4 - gren color, controlled by switch GPIO 0 LOW
|
||||
|
||||
Installation:
|
||||
OEM firmware is based on LEDE with custom UI and support standard sysupgrade
|
||||
variant of firmware. However it requires "*.ubin" extension for sysupgrade file.
|
||||
Always select "Factory reset" switch on upgrade to OpenWRT, otherwise
|
||||
router will not boot.
|
||||
|
||||
MAC addresses with OEM firmware:
|
||||
vendor source
|
||||
lan factory 0x4 (label)
|
||||
5g factory 0x4 (label)
|
||||
2g label with flipped bits bit in 1-st byte and bits 5, 6, 7 in
|
||||
4-th byte
|
||||
|
||||
Example
|
||||
label: 44:xx:xx:b7:xx:xx
|
||||
lan: 44:xx:xx:b7:xx:xx
|
||||
2g 46:xx:xx:c7:xx:xx
|
||||
5g 44:xx:xx:b7:xx:xx
|
||||
|
||||
Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
|
||||
---
|
||||
.../ramips/dts/mt7621_yuncore_fap640.dts | 198 ++++++++++++++++++
|
||||
target/linux/ramips/image/mt7621.mk | 10 +
|
||||
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 5 +
|
||||
3 files changed, 213 insertions(+)
|
||||
create mode 100644 target/linux/ramips/dts/mt7621_yuncore_fap640.dts
|
||||
|
||||
diff --git a/target/linux/ramips/dts/mt7621_yuncore_fap640.dts b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
|
||||
new file mode 100644
|
||||
index 0000000000..b48546d825
|
||||
--- /dev/null
|
||||
+++ b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
|
||||
@@ -0,0 +1,198 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
+
|
||||
+#include "mt7621.dtsi"
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "yuncore,fap640", "mediatek,mt7621-soc";
|
||||
+ model = "YunCore FAP640";
|
||||
+
|
||||
+ aliases {
|
||||
+ led-boot = &led_status_blue;
|
||||
+ led-failsafe = &led_status_red;
|
||||
+ led-running = &led_status_green;
|
||||
+ led-upgrade = &led_status_red;
|
||||
+ label-mac-device = &gmac0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led_status_green: status_green {
|
||||
+ label = "green:status";
|
||||
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ led_status_red: status_red {
|
||||
+ label = "red:status";
|
||||
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ led_status_blue: status_blue {
|
||||
+ label = "blue:status";
|
||||
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ wan {
|
||||
+ label = "green:wan";
|
||||
+ gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "mt7530-0:04:link";
|
||||
+ };
|
||||
+
|
||||
+ lan1 {
|
||||
+ label = "green:lan1";
|
||||
+ gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "mt7530-0:03:link";
|
||||
+ };
|
||||
+
|
||||
+ lan2 {
|
||||
+ label = "green:lan2";
|
||||
+ gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "mt7530-0:02:link";
|
||||
+ };
|
||||
+
|
||||
+ lan3 {
|
||||
+ label = "green:lan3";
|
||||
+ gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "mt7530-0:01:link";
|
||||
+ };
|
||||
+
|
||||
+ lan4 {
|
||||
+ label = "green:lan4";
|
||||
+ gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "mt7530-0:00:link";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ watchdog {
|
||||
+ compatible = "linux,wdt-gpio";
|
||||
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
+ hw_algo = "toggle";
|
||||
+ hw_margin_ms = <200>;
|
||||
+ always-running;
|
||||
+ };
|
||||
+
|
||||
+ keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ reset {
|
||||
+ label = "reset";
|
||||
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&spi0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ flash@0 {
|
||||
+ compatible = "jedec,spi-nor";
|
||||
+ reg = <0>;
|
||||
+ spi-max-frequency = <80000000>;
|
||||
+ m25p,fast-read;
|
||||
+
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "Bootloader";
|
||||
+ reg = <0x0 0x30000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@30000 {
|
||||
+ label = "Config";
|
||||
+ reg = <0x30000 0x10000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ /* range 0x40000 to 0x50000 is empty in vendor
|
||||
+ * firmware, so we do not use it either
|
||||
+ */
|
||||
+
|
||||
+ factory: partition@50000 {
|
||||
+ label = "Factory";
|
||||
+ reg = <0x50000 0x40000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@90000 {
|
||||
+ compatible = "denx,uimage";
|
||||
+ label = "firmware";
|
||||
+ reg = <0x90000 0xf60000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@ff0000 {
|
||||
+ label = "certificates";
|
||||
+ reg = <0xff0000 0x10000>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pcie {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pcie1 {
|
||||
+ wifi@0,0 {
|
||||
+ compatible = "mediatek,mt76";
|
||||
+ reg = <0x0000 0 0 0 0>;
|
||||
+ mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
+ mediatek,disable-radar-background;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&gmac0 {
|
||||
+ mtd-mac-address = <&factory 0x4>;
|
||||
+};
|
||||
+
|
||||
+&switch0 {
|
||||
+ gpio-controller;
|
||||
+ #gpio-cells = <2>;
|
||||
+
|
||||
+ ports {
|
||||
+ port@0 {
|
||||
+ status = "okay";
|
||||
+ label = "lan4";
|
||||
+ };
|
||||
+
|
||||
+ port@1 {
|
||||
+ status = "okay";
|
||||
+ label = "lan3";
|
||||
+ };
|
||||
+
|
||||
+ port@2 {
|
||||
+ status = "okay";
|
||||
+ label = "lan2";
|
||||
+ };
|
||||
+
|
||||
+ port@3 {
|
||||
+ status = "okay";
|
||||
+ label = "lan1";
|
||||
+ };
|
||||
+
|
||||
+ port@4 {
|
||||
+ status = "okay";
|
||||
+ label = "wan";
|
||||
+ mtd-mac-address = <&factory 0x4>;
|
||||
+ mtd-mac-address-increment = <1>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&state_default {
|
||||
+ gpio {
|
||||
+ groups = "jtag", "wdt";
|
||||
+ function = "gpio";
|
||||
+ };
|
||||
+};
|
||||
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
|
||||
index 9e1eed024b..a528a257d4 100644
|
||||
--- a/target/linux/ramips/image/mt7621.mk
|
||||
+++ b/target/linux/ramips/image/mt7621.mk
|
||||
@@ -1637,6 +1637,16 @@ define Device/youku_yk-l2
|
||||
endef
|
||||
TARGET_DEVICES += youku_yk-l2
|
||||
|
||||
+define Device/yuncore_fap640
|
||||
+ $(Device/dsa-migration)
|
||||
+ $(Device/uimage-lzma-loader)
|
||||
+ IMAGE_SIZE := 15808k
|
||||
+ DEVICE_VENDOR := YunCore
|
||||
+ DEVICE_MODEL := FAP640
|
||||
+ DEVICE_PACKAGES := kmod-mt7915e
|
||||
+endef
|
||||
+TARGET_DEVICES += yuncore_fap640
|
||||
+
|
||||
define Device/zbtlink_zbt-we1326
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
|
||||
index 157e706534..be7b226c32 100644
|
||||
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
|
||||
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
|
||||
@@ -38,4 +38,9 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
+ yuncore,fap640)
|
||||
+ hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
|
||||
+ [ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
|
||||
+ [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
|
||||
+ ;;
|
||||
esac
|
||||
--
|
||||
2.25.1
|
||||
|
||||
8
profiles/yuncore_fap640.yml
Normal file
8
profiles/yuncore_fap640.yml
Normal file
@@ -0,0 +1,8 @@
|
||||
---
|
||||
profile: yuncore_fap640
|
||||
target: ramips
|
||||
subtarget: mt7621
|
||||
description: Build image for the Yuncore FAP640
|
||||
image: bin/targets/ramips/mt7621/openwrt-ramips-mt7621-yuncore_fap640-squashfs-sysupgrade.bin
|
||||
include:
|
||||
- ucentral-ap
|
||||
Reference in New Issue
Block a user