scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-10-29 17:42:41 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ipq807x: add motorola q14 support

Browse Source 
Fixes: WIFI-8040
Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin
2022-05-22 16:58:37 +02:00
parent d4442efbfe
commit 85af9d7e0b
11 changed files with 1081 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network
View File

@@ -33,6 +33,7 @@ qcom_setup_interfaces()
edgecore,eap106|\
qcom,ipq5018-mp03.3|\
yuncore,ax840|\
motorola,q14|\
sercomm,wallaby)
ucidef_set_interface_lan "eth0"
ucidef_set_interface_wan "eth1"

9
feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
View File

@@ -107,13 +107,22 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
case "$board" in
cybertan,eww622-a1|\
edgecore,eap104|\
motorola,q14|\
qcom,ipq5018-mp03.1)
caldata_extract "0:ART" 0x1000 0x20000
;;
esac
;;
ath11k/qcn6122/hw1.0/caldata_1.bin)
case "$board" in
motorola,q14)
caldata_extract "0:ART" 0x26800 0x20000
;;
esac
;;
ath11k/qcn6122/hw1.0/caldata_2.bin)
case "$board" in
motorola,q14|\
edgecore,eap104)
caldata_extract "0:ART" 0x4c000 0x20000
;;

48
feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh
View File

@@ -19,6 +19,50 @@ qca_do_upgrade() {
fi
}
find_mmc_part() {
local DEVNAME PARTNAME
if grep -q "$1" /proc/mtd; then
echo "" && return 0
fi
for DEVNAME in /sys/block/mmcblk*/mmcblk*p*; do
PARTNAME=$(grep PARTNAME ${DEVNAME}/uevent | cut -f2 -d'=')
[ "$PARTNAME" = "$1" ] && echo "/dev/$(basename $DEVNAME)" && return 0
done
}
do_flash_emmc() {
local tar_file=$1
local emmcblock=$(find_mmc_part $2)
local board_dir=$3
local part=$4
[ -z "$emmcblock" ] && {
echo failed to find $2
return
}
echo erase $4
dd if=/dev/zero of=${emmcblock}
echo flash $4
tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
}
emmc_do_upgrade() {
local tar_file="$1"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
do_flash_emmc $tar_file '0:HLOS' $board_dir kernel
do_flash_emmc $tar_file 'rootfs' $board_dir root
local emmcblock="$(find_mmc_part "rootfs_data")"
if [ -e "$emmcblock" ]; then
mkfs.ext4 "$emmcblock"
fi
}
platform_check_image() {
local magic_long="$(get_magic_long "$1")"
board=$(board_name)
@@ -42,6 +86,7 @@ platform_check_image() {
tplink,ex227|\
tplink,ex447|\
yuncore,ax840|\
motorola,q14|\
qcom,ipq6018-cp01|\
qcom,ipq807x-hk01|\
qcom,ipq807x-hk14|\
@@ -62,6 +107,9 @@ platform_do_upgrade() {
cig,wf188)
qca_do_upgrade $1
;;
motorola,q14)
emmc_do_upgrade $1
;;
cig,wf188n|\
cig,wf194c|\
cig,wf194c4|\

18
feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-q14.dts Normal file
View File

@@ -0,0 +1,18 @@
/*
* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-q14.dts"
#include "ipq5018.dtsi"

934
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-q14.dts Executable file
View File

@@ -0,0 +1,934 @@
/dts-v1/;
/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
*
* Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "ipq5018.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "Mototola Q14";
compatible = "motorola,q14", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
interrupt-parent = <&intc>;
aliases {
sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
serial0 = &blsp1_uart1;
serial1 = &blsp1_uart2;
ethernet0 = "/soc/dp1";
ethernet1 = "/soc/dp2";
};
chosen {
bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
bootargs-append = " swiotlb=1 coherent_pool=2M";
stdout-path = "serial0";
};
reserved-memory {
#ifdef __IPQ_MEM_PROFILE_256_MB__
/* 256 MB Profile
* +==========+==============+=========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +----------+--------------+-------------------------+
* | NSS | 0x40000000 | 8MB |
* +----------+--------------+-------------------------+
* | Linux | 0x40800000 | Depends on total memory |
* +----------+--------------+-------------------------+
* | uboot | 0x4A600000 | 4MB |
* +----------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +----------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +----------+--------------+-------------------------+
* | TZ | 0x4AC00000 | 4MB |
* +----------+--------------+-------------------------+
* | Q6 | | |
* | code/ | 0x4B000000 | 20MB |
* | data | | |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | data | 0x4C400000 | 13MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | M3 Dump | 0x4D100000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | QDSS | 0x4D200000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | data | 0x4D300000 | 13MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | M3 Dump | 0x4E000000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | QDSS | 0x4E100000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | data | 0x4E200000 | 13MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | M3 Dump | 0x4EF00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | QDSS | 0x4F000000 | 1MB |
* +----------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +===================================================+
*/
q6_mem_regions: q6_mem_regions@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x4100000>;
};
q6_code_data: q6_code_data@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x1400000>;
};
q6_ipq5018_data: q6_ipq5018_data@4C400000 {
no-map;
reg = <0x0 0x4C400000 0x0 0xD00000>;
};
m3_dump: m3_dump@4D100000 {
no-map;
reg = <0x0 0x4D100000 0x0 0x100000>;
};
q6_etr_region: q6_etr_dump@4D200000 {
no-map;
reg = <0x0 0x4D200000 0x0 0x100000>;
};
q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
no-map;
reg = <0x0 0x4D300000 0x0 0xD00000>;
};
m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
no-map;
reg = <0x0 0x4E000000 0x0 0x100000>;
};
q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
no-map;
reg = <0x0 0x4E100000 0x0 0x100000>;
};
q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
no-map;
reg = <0x0 0x4E200000 0x0 0xD00000>;
};
m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
no-map;
reg = <0x0 0x4EF00000 0x0 0x100000>;
};
q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
no-map;
reg = <0x0 0x4F000000 0x0 0x100000>;
};
#else
/* 512MB/1GB Profiles
* +==========+==============+=========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +----------+--------------+-------------------------+
* | NSS | 0x40000000 | 16MB |
* +----------+--------------+-------------------------+
* | Linux | 0x41000000 | Depends on total memory |
* +----------+--------------+-------------------------+
* | uboot | 0x4A600000 | 4MB |
* +----------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +----------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +----------+--------------+-------------------------+
* | TZ | 0x4AC00000 | 4MB |
* +----------+--------------+-------------------------+
* | Q6 | | |
* | code/ | 0x4B000000 | 20MB |
* | data | | |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | data | 0x4C400000 | 14MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | M3 Dump | 0x4D200000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | QDSS | 0x4D300000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | Caldb | 0x4D400000 | 2MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | data | 0x4D600000 | 16MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | M3 Dump | 0x4E600000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | QDSS | 0x4E700000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | Caldb | 0x4E800000 | 5MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | data | 0x4ED00000 | 16MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | M3 Dump | 0x4FD00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | QDSS | 0x4FE00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | Caldb | 0x4FF00000 | 5MB |
* +----------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +===================================================+
*/
q6_mem_regions: q6_mem_regions@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x5400000>;
};
q6_code_data: q6_code_data@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 01400000>;
};
q6_ipq5018_data: q6_ipq5018_data@4C400000 {
no-map;
reg = <0x0 0x4C400000 0x0 0xE00000>;
};
m3_dump: m3_dump@4D200000 {
no-map;
reg = <0x0 0x4D200000 0x0 0x100000>;
};
q6_etr_region: q6_etr_dump@4D300000 {
no-map;
reg = <0x0 0x4D300000 0x0 0x100000>;
};
q6_caldb_region: q6_caldb_region@4D400000 {
no-map;
reg = <0x0 0x4D400000 0x0 0x200000>;
};
q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
no-map;
reg = <0x0 0x4D600000 0x0 0x1000000>;
};
m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
no-map;
reg = <0x0 0x4E600000 0x0 0x100000>;
};
q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
no-map;
reg = <0x0 0x4E700000 0x0 0x100000>;
};
q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
no-map;
reg = <0x0 0x4E800000 0x0 0x500000>;
};
q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
no-map;
reg = <0x0 0x4ED00000 0x0 0x1000000>;
};
m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
no-map;
reg = <0x0 0x4FD00000 0x0 0x100000>;
};
q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
no-map;
reg = <0x0 0x4FE00000 0x0 0x100000>;
};
q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
no-map;
reg = <0x0 0x4FF00000 0x0 0x500000>;
};
#endif
};
soc {
serial@78af000 {
status = "ok";
};
blsp1_uart2: serial@78b0000 {
pinctrl-0 = <&blsp1_uart_pins>;
pinctrl-names = "default";
};
qpic_bam: dma@7984000{
status = "ok";
};
nand: qpic-nand@79b0000 {
pinctrl-0 = <&qspi_nand_pins>;
pinctrl-names = "default";
status = "disabled";
};
spi_0: spi@78b5000 { /* BLSP1 QUP0 */
pinctrl-0 = <&blsp0_spi_pins>;
pinctrl-names = "default";
cs-select = <0>;
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
linux,modalias = "m25p80", "n25q128a11";
spi-max-frequency = <50000000>;
use-default-sizes;
};
};
mdio0: mdio@88000 {
status = "ok";
ethernet-phy@0 {
reg = <7>;
};
};
mdio1: mdio@90000 {
status = "ok";
pinctrl-0 = <&mdio1_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 39 0>;
ethernet-phy@0 {
reg = <28>;
};
};
ess-instance {
num_devices = <0x1>;
ess-switch@0x39c00000 {
switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
qcom,port_phyinfo {
port@0 {
port_id = <1>;
phy_address = <7>;
mdiobus = <&mdio0>;
};
port@1 {
port_id = <2>;
phy_address = <0x1c>;
mdiobus = <&mdio1>;
port_mac_sel = "QGMAC_PORT";
};
};
led_source@0 {
source = <0>;
mode = "normal";
speed = "all";
blink_en = "enable";
active = "high";
};
};
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
clock-names = "nss-snoc-gmac-axi-clk";
qcom,id = <1>;
reg = <0x39C00000 0x10000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
qcom,mactype = <2>;
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <7>;
mdio-bus = <&mdio0>;
local-mac-address = [000000000000];
phy-mode = "sgmii";
qcom,rx-page-mode = <0>;
};
dp2 {
device_type = "network";
compatible = "qcom,nss-dp";
clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
clock-names = "nss-snoc-gmac-axi-clk";
qcom,id = <2>;
reg = <0x39D00000 0x10000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
qcom,mactype = <2>;
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <28>;
mdio-bus = <&mdio1>;
local-mac-address = [000000000000];
phy-mode = "sgmii";
qcom,rx-page-mode = <0>;
};
nss-macsec1 {
compatible = "qcom,nss-macsec";
phy_addr = <0x1c>;
mdiobus = <&mdio1>;
};
pcm: pcm@0xA3C0000{
pinctrl-0 = <&audio_pins>;
pinctrl-names = "default";
status = "disabled";
};
};
qcom,test@0 {
status = "ok";
};
thermal-zones {
status = "ok";
};
};
&sdhc_1 {
status = "ok";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
qcom,nonremovable;
};
&tlmm {
pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
pinctrl-names = "default";
emmc_pins: emmc_pins {
emmc_clk {
pins = "gpio9";
function = "sdc1_clk";
drive-strength = <8>;
bias-disable;
};
emmc_cmd {
pins = "gpio8";
function = "sdc1_cmd";
drive-strength = <8>;
bias-pull-up;
};
emmc_data_0 {
pins = "gpio7";
function = "sdc10";
drive-strength = <8>;
bias-disable;
};
emmc_data_1 {
pins = "gpio6";
function = "sdc11";
drive-strength = <8>;
bias-disable;
};
emmc_data_2 {
pins = "gpio5";
function = "sdc12";
drive-strength = <8>;
bias-disable;
};
emmc_data_3 {
pins = "gpio4";
function = "sdc13";
drive-strength = <8>;
bias-disable;
};
};
blsp0_uart_pins: uart_pins {
blsp0_uart_rx_tx {
pins = "gpio20", "gpio21";
function = "blsp0_uart0";
bias-disable;
};
};
blsp1_uart_pins: blsp1_uart_pins {
blsp1_uart_rx_tx {
pins = "gpio23", "gpio25", "gpio24", "gpio26";
function = "blsp1_uart2";
bias-disable;
};
};
blsp0_spi_pins: blsp0_spi_pins {
mux {
pins = "gpio10", "gpio11", "gpio12", "gpio13";
function = "blsp0_spi";
drive-strength = <2>;
bias-disable;
};
};
qspi_nand_pins: qspi_nand_pins {
qspi_clock {
pins = "gpio9";
function = "qspi_clk";
drive-strength = <8>;
bias-disable;
};
qspi_cs {
pins = "gpio8";
function = "qspi_cs";
drive-strength = <8>;
bias-disable;
};
qspi_data {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
function = "qspi_data";
drive-strength = <8>;
bias-disable;
};
};
mdio1_pins: mdio_pinmux {
mux_0 {
pins = "gpio36";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio37";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
phy_led_pins: phy_led_pins {
gephy_led_pin {
pins = "gpio46";
function = "led0";
drive-strength = <8>;
bias-pull-down;
};
};
i2c_pins: i2c_pins {
i2c_scl {
pins = "gpio25";
function = "blsp2_i2c1";
drive-strength = <8>;
bias-disable;
};
i2c_sda {
pins = "gpio26";
function = "blsp2_i2c1";
drive-strength = <8>;
bias-disable;
};
};
button_pins: button_pins {
wps_button {
pins = "gpio38";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
reset_button {
pins = "gpio31";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
audio_pins: audio_pinmux {
mux_1 {
pins = "gpio24";
function = "audio_rxbclk";
drive-strength = <8>;
bias-pull-down;
};
mux_2 {
pins = "gpio25";
function = "audio_rxfsync";
drive-strength = <8>;
bias-pull-down;
};
mux_3 {
pins = "gpio26";
function = "audio_rxd";
drive-strength = <8>;
bias-pull-down;
};
mux_4 {
pins = "gpio27";
function = "audio_txmclk";
drive-strength = <8>;
bias-pull-down;
};
mux_5 {
pins = "gpio28";
function = "audio_txbclk";
drive-strength = <8>;
bias-pull-down;
};
mux_6 {
pins = "gpio29";
function = "audio_txfsync";
drive-strength = <8>;
bias-pull-down;
};
mux_7 {
pins = "gpio30";
function = "audio_txd";
drive-strength = <8>;
bias-pull-down;
};
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
button@1 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
button@2 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
};
&q6v5_wcss {
compatible = "qcom,ipq5018-q6-mpd";
#address-cells = <1>;
#size-cells = <1>;
ranges;
firmware = "IPQ5018/q6_fw.mdt";
reg = <0x0cd00000 0x4040>,
<0x1938000 0x8>,
<0x193d204 0x4>;
reg-names = "qdsp6",
"tcsr-msip",
"tcsr-q6";
resets = <&gcc GCC_WCSSAON_RESET>,
<&gcc GCC_WCSS_Q6_BCR>;
reset-names = "wcss_aon_reset",
"wcss_q6_reset";
clocks = <&gcc GCC_Q6_AXIS_CLK>,
<&gcc GCC_WCSS_ECAHB_CLK>,
<&gcc GCC_Q6_AXIM_CLK>,
<&gcc GCC_Q6_AXIM2_CLK>,
<&gcc GCC_Q6_AHB_CLK>,
<&gcc GCC_Q6_AHB_S_CLK>,
<&gcc GCC_WCSS_AXI_S_CLK>;
clock-names = "gcc_q6_axis_clk",
"gcc_wcss_ecahb_clk",
"gcc_q6_axim_clk",
"gcc_q6_axim2_clk",
"gcc_q6_ahb_clk",
"gcc_q6_ahb_s_clk",
"gcc_wcss_axi_s_clk";
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_mem_regions>, <&q6_etr_region>;
#else
memory-region = <&q6_mem_regions>, <&q6_etr_region>,
<&q6_caldb_region>;
#endif
qcom,rproc = <&q6v5_wcss>;
qcom,bootargs_smem = <507>;
boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
<0x2 0x4 0x2 0x12 0x0 0x0>;
status = "ok";
q6_wcss_pd1: remoteproc_pd1@4ab000 {
compatible = "qcom,ipq5018-wcss-ahb-mpd";
reg = <0x4ab000 0x20>;
reg-names = "rmb";
firmware = "IPQ5018/q6_fw.mdt";
m3_firmware = "IPQ5018/m3_fw.mdt";
interrupts-extended = <&wcss_smp2p_in 8 0>,
<&wcss_smp2p_in 9 0>,
<&wcss_smp2p_in 12 0>,
<&wcss_smp2p_in 11 0>;
interrupt-names = "fatal",
"ready",
"spawn-ack",
"stop-ack";
resets = <&gcc GCC_WCSSAON_RESET>,
<&gcc GCC_WCSS_BCR>,
<&gcc GCC_CE_BCR>;
reset-names = "wcss_aon_reset",
"wcss_reset",
"ce_reset";
clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
<&gcc GCC_WCSS_ACMT_CLK>,
<&gcc GCC_WCSS_AXI_M_CLK>;
clock-names = "gcc_wcss_ahb_s_clk",
"gcc_wcss_acmt_clk",
"gcc_wcss_axi_m_clk";
qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
qcom,smem-states = <&wcss_smp2p_out 8>,
<&wcss_smp2p_out 9>,
<&wcss_smp2p_out 10>;
qcom,smem-state-names = "shutdown",
"stop",
"spawn";
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_ipq5018_data>, <&m3_dump>,
<&q6_etr_region>;
#else
memory-region = <&q6_ipq5018_data>, <&m3_dump>,
<&q6_etr_region>, <&q6_caldb_region>;
#endif
};
q6_wcss_pd2: remoteproc_pd2 {
compatible = "qcom,ipq5018-wcss-pcie-mpd";
firmware = "IPQ5018/q6_fw.mdt";
m3_firmware = "qcn6122/m3_fw.mdt";
interrupts-extended = <&wcss_smp2p_in 16 0>,
<&wcss_smp2p_in 17 0>,
<&wcss_smp2p_in 20 0>,
<&wcss_smp2p_in 19 0>;
interrupt-names = "fatal",
"ready",
"spawn-ack",
"stop-ack";
qcom,smem-states = <&wcss_smp2p_out 16>,
<&wcss_smp2p_out 17>,
<&wcss_smp2p_out 18>;
qcom,smem-state-names = "shutdown",
"stop",
"spawn";
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
<&q6_qcn6122_etr_1>;
#else
memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
#endif
};
q6_wcss_pd3: remoteproc_pd3 {
compatible = "qcom,ipq5018-wcss-pcie-mpd";
firmware = "IPQ5018/q6_fw.mdt";
interrupts-extended = <&wcss_smp2p_in 24 0>,
<&wcss_smp2p_in 25 0>,
<&wcss_smp2p_in 28 0>,
<&wcss_smp2p_in 27 0>;
interrupt-names = "fatal",
"ready",
"spawn-ack",
"stop-ack";
qcom,smem-states = <&wcss_smp2p_out 24>,
<&wcss_smp2p_out 25>,
<&wcss_smp2p_out 26>;
qcom,smem-state-names = "shutdown",
"stop",
"spawn";
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
<&q6_qcn6122_etr_2>;
#else
memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
#endif
};
};
&i2c_0 {
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
status = "disabled";
};
&wifi0 {
/* IPQ5018 */
qcom,multipd_arch;
qcom,rproc = <&q6_wcss_pd1>;
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x23>;
qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
#else
qcom,caldb-addr = <0x4D400000>;
m3-dump-addr = <0x4D200000>;
#endif
qcom,caldb-size = <0x200000>;
mem-region = <&q6_ipq5018_data>;
status = "ok";
};
&wifi1 {
/* QCN6122 5G */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
qcom,rproc = <&q6_wcss_pd2>;
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x60>;
qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
#else
qcom,caldb-addr = <0x4E800000>;
m3-dump-addr = <0x4E600000>;
#endif
qcom,caldb-size = <0x500000>;
mem-region = <&q6_qcn6122_data1>;
status = "ok";
};
&wifi2 {
/* QCN6122 6G */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
qcom,rproc = <&q6_wcss_pd3>;
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0xb0>;
qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E200000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
#else
qcom,caldb-addr = <0x4FF00000>;
m3-dump-addr = <0x4FD00000>;
#endif
qcom,caldb-size = <0x500000>;
mem-region = <&q6_qcn6122_data2>;
status = "ok";
};
&usb3 {
status = "ok";
device-power-gpio = <&tlmm 24 1>;
};
&dwc_0 {
/delete-property/ #phy-cells;
/delete-property/ phys;
/delete-property/ phy-names;
};
&hs_m31phy_0 {
status = "ok";
};
&eud {
status = "ok";
};
&pcie_x1 {
status = "disabled";
perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
&pcie_x2 {
status = "disabled";
perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
};
&pcie_x1phy {
status = "disabled";
};
&pcie_x2phy {
status = "disabled";
};
&pcie_x1_rp {
status = "disabled";
mhi_0: qcom,mhi@0 {
reg = <0 0 0 0 0 >;
};
};
&pcie_x2_rp {
status = "disabled";
mhi_1: qcom,mhi@1 {
reg = <0 0 0 0 0 >;
};
};

11
feeds/ipq807x/ipq807x/image/ipq50xx.mk
View File

@@ -18,6 +18,17 @@ define Device/edgecore_eap104
endef
TARGET_DEVICES += edgecore_eap104
define Device/motorola_q14
DEVICE_TITLE := Motorola Q14
DEVICE_DTS := qcom-ipq5018-q14
SUPPORTED_DEVICES := motorola,q14
DEVICE_PACKAGES := ath11k-wifi-motorola-q14 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
DEVICE_DTS_CONFIG := config@mp03.5-c1
IMAGES := sysupgrade.tar mmc-factory.bin
IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
endef
TARGET_DEVICES += motorola_q14
define Device/qcom_mp03_1
DEVICE_TITLE := Qualcomm Maple 03.1
DEVICE_DTS := qcom-ipq5018-mp03.1

13
feeds/wifi-ax/ath11k-wifi/Makefile
View File

@@ -86,6 +86,11 @@ $(call Package/ath11k-wifi-default)
TITLE:=gl-ax1800 bdf
endef
define Package/ath11k-wifi-motorola-q14
$(call Package/ath11k-wifi-default)
TITLE:=motorola q14 bdf
endef
define ath11k-wifi-install-one-to
$(INSTALL_DIR) $(2)/lib/firmware/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/$(3)/board.bin
@@ -173,6 +178,13 @@ define Package/ath11k-wifi-gl-ax1800/install
$(INSTALL_DATA) ./board-gl-ax1800.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
endef
define Package/ath11k-wifi-motorola-q14/install
$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
$(INSTALL_DATA) ./board-motorol-q14.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
$(INSTALL_DATA) ./board-2-motorol-q14.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board-2.bin
endef
$(eval $(call generate-ath11k-wifi-package,cig-wf188,Cigtech WF188))
$(eval $(call generate-ath11k-wifi-package,cig-wf188n,Cigtech WF188n))
$(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
@@ -196,3 +208,4 @@ $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq8074))
$(eval $(call BuildPackage,ath11k-wifi-qcom-ipq6018))
$(eval $(call BuildPackage,ath11k-wifi-qcom-qcn9000))
$(eval $(call BuildPackage,ath11k-wifi-cig-wf196_6g))
$(eval $(call BuildPackage,ath11k-wifi-motorola-q14))

BIN
feeds/wifi-ax/ath11k-wifi/board-2-motorol-q14.bin.QCN6122 Normal file
View File

Binary file not shown.

BIN
feeds/wifi-ax/ath11k-wifi/board-motorol-q14.bin.IPQ5018 Normal file
View File

Binary file not shown.

31
patches/ipq807x/0005-include-image-commands.mk-build-mmc-qdsk-images.patch Normal file
View File

@@ -0,0 +1,31 @@
From 398ceb5dee1a6e1e7e30e02d4f77316a83fdc5b1 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Sun, 22 May 2022 16:56:10 +0200
Subject: [PATCH] include/image-commands.mk: build mmc qdsk images
Signed-off-by: John Crispin <john@phrozen.org>
---
include/image-commands.mk | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/image-commands.mk b/include/image-commands.mk
index d4bce80e68..541ec4f575 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -354,6 +354,13 @@ define Build/qsdk-ipq-factory-nor
@mv $@.new $@
endef
+define Build/qsdk-ipq-factory-mmc
+ $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
+ $@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv $@.new $@
+endef
+
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ \
-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
--
2.25.1

16
profiles/motorola_q14.yml Normal file
View File

@@ -0,0 +1,16 @@
---
profile: motorola_q14
target: ipq807x
subtarget: ipq50xx
description: Build image for the Motorola Q14
image: bin/targets/ipq807x/ipq50xx/openwrt-ipq807x-motorola_q14-squashfs-sysupgrade.tar
feeds:
- name: ipq807x
path: ../../feeds/ipq807x
include:
- wifi-ax
- ucentral-ap
packages:
- e2fsprogs
diffconfig: |
CONFIG_KERNEL_IPQ_MEM_PROFILE=512