scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-10-29 09:32:34 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ipq807x: Add support for Mesh++ S618 devices

Browse Source 
Mesh++ S618 has below products based on Qualcomm IPQ6018:

  * cp03-c1
  * cp01-c1

These are Wi-Fi 6 (IEEE 80211.ax) dual band 2x2 mesh routers.

Fixes: WIFI-10561
Signed-off-by: Krishna <krishna@meshplusplus.com>
Signed-off-by: Edward Cheung <edward@meshplusplus.com>
Signed-off-by: Alex Ballmer <alexb@meshplusplus.com>
This commit is contained in:
Krishna
2022-07-21 02:17:04 +05:30
committed by John Crispin
parent 2291ccf198
commit 888aa40057
14 changed files with 928 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
.github/workflows/build-dev.yml vendored
View File

@@ -21,7 +21,7 @@ jobs:
strategy:
fail-fast: false
matrix:
target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'x64_vm' ]
target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'x64_vm' ]
steps:
- uses: actions/checkout@v2

4
feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network
View File

@@ -58,7 +58,9 @@ qcom_setup_interfaces()
ucidef_set_interface_wan "eth4"
;;
wallys,dr6018-v4|\
glinet,ax1800)
glinet,ax1800|\
meshpp,s618-cp03|\
meshpp,s618-cp01)
ucidef_set_interface_lan "eth1 eth2 eth3 eth4"
ucidef_set_interface_wan "eth0"
;;

3
feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
View File

@@ -105,6 +105,9 @@ case "$FIRMWARE" in
hfcl,ion4xe|\
wallys,dr6018|\
wallys,dr6018-v4|\
meshpp,ipq6018-cp01|\
meshpp,ipq6018-cp03|\
qcom,ipq6018-cp03|\
qcom,ipq6018-cp01|\
xiaomi,ax1800|\
glinet,ax1800|\

4
feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh
View File

@@ -129,7 +129,9 @@ platform_do_upgrade() {
wallys,dr6018-v4|\
yuncore,ax840|\
tplink,ex447|\
tplink,ex227)
tplink,ex227|\
meshpp,s618-cp03|\
meshpp,s618-cp01)
nand_upgrade_tar "$1"
;;
hfcl,ion4xi|\

2
feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-meshpp-s618-cp01.dts Normal file
View File

@@ -0,0 +1,2 @@
#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp01.dts"
#include "qcom-ipq6018.dtsi"

2
feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-meshpp-s618-cp03.dts Normal file
View File

@@ -0,0 +1,2 @@
#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp03.dts"
#include "qcom-ipq6018.dtsi"

23
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp01.dts Normal file
View File

@@ -0,0 +1,23 @@
/dts-v1/;
/*
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq6018-meshpp-s618.dtsi"
/ {
model = "MeshPlusPlus, Inc. S618 CP01";
compatible = "meshpp,s618-cp01", "qcom,ipq6018-cp01", "qcom,ipq6018";
};

23
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp03.dts Normal file
View File

@@ -0,0 +1,23 @@
/dts-v1/;
/*
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq6018-meshpp-s618.dtsi"
/ {
model = "MeshPlusPlus, Inc. S618 CP01";
compatible = "meshpp,s618-cp03", "qcom,ipq6018-cp03", "qcom,ipq6018";
};

789
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618.dtsi Normal file
View File

@@ -0,0 +1,789 @@
/*
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq6018.dtsi"
#include <dt-bindings/input/input.h>
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
interrupt-parent = <&intc>;
qcom,msm-id = <0x1A5 0x0>;
aliases {
ethernet0 = "/soc/dp1";
ethernet1 = "/soc/dp2";
ethernet2 = "/soc/dp3";
ethernet3 = "/soc/dp4";
ethernet4 = "/soc/dp5";
led-boot = &led_green;
led-running = &led_blue;
led-upgrade = &led_red;
};
chosen {
bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
#ifdef __IPQ_MEM_PROFILE_256_MB__
bootargs-append = " console=ttyMSM0,115200n8 panic=10 ubi.mtd=nand root=mtd:ubi_rootfs rootfstype=squashfs swiotlb=1 rootwait";
#else
bootargs-append = " console=ttyMSM0,115200n8 panic=10 ubi.mtd=nand root=mtd:ubi_rootfs rootfstype=squashfs swiotlb=1 coherent_pool=2M rootwait";
#endif
};
/*
* +=========+==============+========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | | | |
* | | | |
* | Linux | 0x41000000 | 139MB |
* | | | |
* | | | |
* | | | |
* +--------+--------------+-------------------------+
* | TZ App | 0x49B00000 | 6MB |
* +--------+--------------+-------------------------+
*
* From the available 145 MB for Linux in the first 256 MB,
* we are reserving 6 MB for TZAPP.
*
* Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
* for memory layout.
*/
/* TZAPP is enabled only in default memory profile */
reserved-memory {
#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
tzapp:tzapp@49B00000 { /* TZAPPS */
no-map;
reg = <0x0 0x49B00000 0x0 0x00600000>;
};
#endif
qcn9000_pcie0@50200000 {
no-map;
reg = <0x0 0x50200000 0x0 0x03700000>;
};
mhi_region0: dma_pool0@53900000 {
compatible = "shared-dma-pool";
no-map;
reg = <0x0 0x53900000 0x0 0x01800000>;
};
};
};
&tlmm {
pinctrl-0 = <&sd_ldo_pins &generic_gpios &pcie_pins>;
pinctrl-names = "default";
uart_pins: uart_pins {
mux {
pins = "gpio44", "gpio45";
function = "blsp2_uart";
drive-strength = <8>;
bias-pull-down;
};
};
sd_ldo_pins: sd_ldo_pins {
mux {
pins = "gpio66";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
};
spi_0_pins: spi_0_pins {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41";
function = "blsp0_spi";
drive-strength = <8>;
bias-pull-down;
};
};
spi_1_pins: spi_1_pins {
mux {
pins = "gpio69", "gpio71", "gpio72";
function = "blsp1_spi";
drive-strength = <8>;
bias-pull-down;
};
spi_cs {
pins = "gpio70";
function = "blsp1_spi";
drive-strength = <8>;
bias-disable;
};
quartz_interrupt {
pins = "gpio78";
function = "gpio";
input;
bias-disable;
};
quartz_reset {
pins = "gpio79";
function = "gpio";
output-low;
bias-disable;
};
};
button_pins: button_pins {
switch_button {
pins = "gpio9";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
reset_button {
pins = "gpio19";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
mdio_pins: mdio_pinmux {
mux_0 {
pins = "gpio64";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio65";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
mux_2 {
pins = "gpio75";
function = "gpio";
bias-pull-up;
};
mux_3 {
pins = "gpio77";
function = "gpio";
bias-pull-up;
};
};
leds_pins: leds_pins {
led_5g {
pins = "gpio35";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_2g {
pins = "gpio37";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
m2_1_regulator {
pins = "gpio29";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
m2_1_pwr_en {
pins = "gpio49";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
m2_1_reset_n {
pins = "gpio32";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_red: red {
pins = "gpio50";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_green: green {
pins = "gpio54";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_blue: blue {
pins = "gpio57";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
sd_pins: sd_pins {
mux_1 {
pins = "gpio62";
function = "sd_card";
drive-strength = <8>;
bias-pull-up;
};
mux_2 {
pins = "gpio23";
function = "gpio";
drive_strength = <8>;
bias-disable;
output-high;
};
};
extcon_usb_pins: extcon_usb_pins {
mux {
pins = "gpio26";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
generic_gpios: generic_gpios {
gpio42 {
pins = "gpio42";
function = "gpio";
drive-strength = <8>;
bias-disable;
output-high;
};
};
pcie_pins: pcie_pins {
pcie0_enable {
pins = "gpio34";
function = "gpio";
drive-strength = <8>;
bias-disable;
output-high;
};
};
i2c_2_pins: i2c_2_pins {
mux {
pins = "gpio55", "gpio56";
function = "gpio";
drive-strength = <16>;
bias-pull-up;
input-enable;
};
mux_2 {
pins = "gpio48";
function = "gpio";
drive_strength = <16>;
output-high;
};
mux_3 {
pins = "gpio73";
function = "gpio";
drive-stength = <16>;
output-low;
};
};
};
&soc {
extcon_usb: extcon_usb {
pinctrl-0 = <&extcon_usb_pins>;
pinctrl-names = "default";
id-gpio = <&tlmm 26 GPIO_ACTIVE_LOW>;
status = "ok";
};
mdio0: mdio@90000 {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 75 0 &tlmm 77 1>;
status = "ok";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
ess0: ess-switch@3a000000 {
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
switch_lan_bmp = <0x1e>; /* lan port bitmap */
switch_wan_bmp = <0x20>; /* wan port bitmap */
switch_inner_bmp = <0xc0>; /*inner port bitmap*/
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
qcom,port_phyinfo {
port@0 {
port_id = <1>;
phy_address = <0>;
};
port@1 {
port_id = <2>;
phy_address = <1>;
};
port@2 {
port_id = <3>;
phy_address = <2>;
};
port@3 {
port_id = <4>;
phy_address = <3>;
};
port@4 {
port_id = <5>;
phy_address = <4>;
};
};
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <1>;
reg = <0x3a001000 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <0>;
phy-mode = "sgmii";
};
dp2 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <2>;
reg = <0x3a001200 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <1>;
phy-mode = "sgmii";
};
dp3 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <3>;
reg = <0x3a001400 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <2>;
phy-mode = "sgmii";
};
dp4 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <4>;
reg = <0x3a001600 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <3>;
phy-mode = "sgmii";
};
dp5 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <5>;
reg = <0x3a001800 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <4>;
phy-mode = "sgmii";
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
led@29 {
label = "m2_1_regulator";
gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "on";
};
led@49 {
label = "m2_1_pwr_en";
gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "on";
};
led@32 {
label = "m2_1_reset_n";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
default-state = "off";
};
led@50 {
label = "red";
gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "on";
};
led@54 {
label = "green";
gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "on";
};
led@57 {
label = "blue";
gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "off";
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
switch {
label = "switch";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
i2c_2: i2c@0 { /* i2c gpio */
pinctrl-0 = <&i2c_2_pins>;
pinctrl-names = "default";
compatible = "i2c-gpio";
gpios = <&tlmm 56 0>, <&tlmm 55 0>;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <7>;
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
};
wifi3: wifi3@f00000 {
qcom,wlan-ramdump-dynamic = <0x400000>;
mhi,max-channels = <30>;
mhi,timeout = <10000>;
#address-cells = <1>;
#size-cells = <0>;
qrtr_node_id = <0x20>;
qca,auto-restart;
#ifdef __IPQ_MEM_PROFILE_512_MB__
/* QCN9000 tgt-mem-mode=1 layout - 30MB
* +=========+==============+=========+
* | Region | Start Offset | Size |
* +---------+--------------+---------+
* | BASE | 0x4E400000 | 20MB |
* +---------+--------------+---------+
* | M3 Dump | 0x4F800000 | 1MB |
* +---------+--------------+---------+
* | Caldb | 0x4FA00000 | 8MB |
* +==================================+
*/
base-addr = <0x4E400000>;
m3-dump-addr = <0x4F800000>;
qcom,caldb-addr = <0x4FA00000>;
#else
/* QCN9000 tgt-mem-mode=0 layout - 55MB
* +=========+==============+=========+
* | Region | Start Offset | Size |
* +---------+--------------+---------+
* | BASE | 0x50200000 | 45MB |
* +---------+--------------+---------+
* | M3 Dump | 0x52F00000 | 1MB |
* +---------+--------------+---------+
* | Caldb | 0x53100000 | 8MB |
* +==================================+
*/
base-addr = <0x50200000>;
m3-dump-addr = <0x52F00000>;
qcom,caldb-addr = <0x53100000>;
#endif
status = "ok";
mhi_channels {
mhi_chan@0 {
reg = <0>;
label = "LOOPBACK";
mhi,num-elements = <32>;
mhi,event-ring = <1>;
mhi,chan-dir = <1>;
mhi,data-type = <0>;
mhi,doorbell-mode = <2>;
mhi,ee = <0x14>;
};
mhi_chan@1 {
reg = <1>;
label = "LOOPBACK";
mhi,num-elements = <32>;
mhi,event-ring = <1>;
mhi,chan-dir = <2>;
mhi,data-type = <0>;
mhi,doorbell-mode = <2>;
mhi,ee = <0x14>;
};
mhi_chan@4 {
reg = <4>;
label = "DIAG";
mhi,num-elements = <32>;
mhi,event-ring = <1>;
mhi,chan-dir = <1>;
mhi,data-type = <0>;
mhi,doorbell-mode = <2>;
mhi,ee = <0x14>;
};
mhi_chan@5 {
reg = <5>;
label = "DIAG";
mhi,num-elements = <32>;
mhi,event-ring = <1>;
mhi,chan-dir = <2>;
mhi,data-type = <0>;
mhi,doorbell-mode = <2>;
mhi,ee = <0x14>;
};
mhi_chan@20 {
reg = <20>;
label = "IPCR";
mhi,num-elements = <32>;
mhi,event-ring = <1>;
mhi,chan-dir = <1>;
mhi,data-type = <1>;
mhi,doorbell-mode = <2>;
mhi,ee = <0x14>;
mhi,auto-start;
};
mhi_chan@21 {
reg = <21>;
label = "IPCR";
mhi,num-elements = <32>;
mhi,event-ring = <1>;
mhi,chan-dir = <2>;
mhi,data-type = <0>;
mhi,doorbell-mode = <2>;
mhi,ee = <0x14>;
mhi,auto-queue;
mhi,auto-start;
};
};
mhi_events {
mhi_event@0 {
mhi,num-elements = <32>;
mhi,intmod = <1>;
mhi,msi = <1>;
mhi,priority = <1>;
mhi,brstmode = <2>;
mhi,data-type = <1>;
};
mhi_event@1 {
mhi,num-elements = <256>;
mhi,intmod = <1>;
mhi,msi = <2>;
mhi,priority = <1>;
mhi,brstmode = <2>;
};
};
mhi_devices {
mhi_qrtr {
mhi,chan = "IPCR";
qcom,net-id = <0>;
};
};
};
};
&blsp1_uart3 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
status = "ok";
};
&qpic_bam {
status = "ok";
};
&ssphy_0 {
status = "ok";
};
&qusb_phy_0 {
status = "ok";
};
&qusb_phy_1 {
status = "ok";
};
&usb2 {
status = "ok";
};
&usb3 {
status = "ok";
};
&nss_crypto {
status = "ok";
};
&CPU0 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1200000 1100000
1608000 1100000
>;
clock-latency = <200000>;
};
&CPU1 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1200000 1100000
1608000 1100000
>;
clock-latency = <200000>;
};
&CPU2 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1200000 1100000
1608000 1100000
>;
clock-latency = <200000>;
};
&CPU3 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1200000 1100000
1608000 1100000
>;
clock-latency = <200000>;
};
&wifi0 {
qcom,board_id = <0x10>;
status = "ok";
};
&pcie0 {
status = "ok";
pcie0_rp {
reg = <0 0 0 0 0>;
status = "ok";
mhi_0: qcom,mhi@0 {
reg = <0 0 0 0 0 >;
qrtr_instance_id = <0x20>;
qcom,board_id = <0xa4>;
#if !defined(__IPQ_MEM_PROFILE_256_MB__)
memory-region = <&mhi_region0>;
#endif
};
};
};
&pcie_phy {
status = "ok";
};
&spi_0 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-select = <0>;
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
linux,modalias = "m25p80", "n25q128a11";
spi-max-frequency = <50000000>;
use-default-sizes;
};
};

18
feeds/ipq807x/ipq807x/image/ipq60xx.mk
View File

@@ -122,3 +122,21 @@ define Device/plasmacloud_pax1800-v2
DEVICE_PACKAGES += ath11k-wifi-plasmacloud-pax1800
endef
TARGET_DEVICES += plasmacloud_pax1800-v2
define Device/meshpp_s618_cp03
DEVICE_TITLE := S618 cp03
DEVICE_DTS := qcom-ipq6018-meshpp-s618-cp03
SUPPORTED_DEVICES := meshpp,s618-cp03
DEVICE_DTS_CONFIG := config@cp03-c1
DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
endef
TARGET_DEVICES += meshpp_s618_cp03
define Device/meshpp_s618_cp01
DEVICE_TITLE := S618 cp01
DEVICE_DTS := qcom-ipq6018-meshpp-s618-cp01
SUPPORTED_DEVICES := meshpp,s618-cp01
DEVICE_DTS_CONFIG := config@cp01-c1
DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
endef
TARGET_DEVICES += meshpp_s618_cp01

14
feeds/wifi-ax/ath11k-wifi/Makefile
View File

@@ -41,7 +41,8 @@ ALLWIFIBOARDS:= \
wallys-dr6018-v4 \
tplink-ex227 \
tplink-ex447 \
yuncore-ax840
yuncore-ax840 \
meshpp-s618
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ath11k-wifi-$(BOARD))
@@ -108,6 +109,11 @@ $(call Package/ath11k-wifi-default)
TITLE:=hfcl-ion4xi bdf
endef
define Package/ath11k-wifi-meshpp-s618
$(call Package/ath11k-wifi-default)
TITLE:=meshpp-s618 bdf
endef
define ath11k-wifi-install-one-to
$(INSTALL_DIR) $(2)/lib/firmware/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/$(3)/board.bin
@@ -212,6 +218,11 @@ define Package/ath11k-wifi-plasmacloud-pax1800/install
$(INSTALL_DATA) ./board-plasmacloud-pax1800.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
endef
define Package/ath11k-wifi-meshpp-s618/install
$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/
$(INSTALL_DATA) ./board-2-meshpp-s618.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
endef
define Package/ath11k-wifi-hfcl-ion4xi/install
$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/
$(INSTALL_DATA) ./board-hfcl-ion4xi.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
@@ -232,6 +243,7 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
$(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
$(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
$(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))
$(eval $(call generate-ath11k-wifi-package,meshpp-s618,Mesh++ S618))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
$(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))

BIN
feeds/wifi-ax/ath11k-wifi/board-2-meshpp-s618.bin.IPQ6018 Normal file
View File

Binary file not shown.

24
profiles/meshpp_s618_cp01.yml Normal file
View File

@@ -0,0 +1,24 @@
profile: meshpp_s618_cp01
target: ipq807x
subtarget: ipq60xx
description: Build image for Mesh++ S618 CP01 models
image: bin/targets/ipq807x/ipq60xx/openwrt-ipq807x-meshpp_s618_cp01-squashfs-sysupgrade.tar
feeds:
- name: ipq807x
path: ../../feeds/ipq807x
include:
- wifi-ax
- ucentral-ap
- wwan
packages:
- i2c-tools
- kmod-i2c-algo-bit
- kmod-i2c-core
- kmod-i2c-gpio
- libi2c
- iperf3
diffconfig: |
CONFIG_KERNEL_IPQ_MEM_PROFILE=0
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH=y
CONFIG_BUSYBOX_CONFIG_WATCH=y

24
profiles/meshpp_s618_cp03.yml Normal file
View File

@@ -0,0 +1,24 @@
profile: meshpp_s618_cp03
target: ipq807x
subtarget: ipq60xx
description: Build image for Mesh++ S618 CP03 models
image: bin/targets/ipq807x/ipq60xx/openwrt-ipq807x-meshpp_s618_cp03-squashfs-sysupgrade.tar
feeds:
- name: ipq807x
path: ../../feeds/ipq807x
include:
- wifi-ax
- ucentral-ap
- wwan
packages:
- i2c-tools
- kmod-i2c-algo-bit
- kmod-i2c-core
- kmod-i2c-gpio
- libi2c
- iperf3
diffconfig: |
CONFIG_KERNEL_IPQ_MEM_PROFILE=0
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH=y
CONFIG_BUSYBOX_CONFIG_WATCH=y