scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-10-29 01:22:25 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ipq807x: add initial support for MUXI AP3220L

Browse Source 
Hardware:
* SoC: Qcom IPQ5018
* RAM: 512MB
* Flash: 4MB Nor + 128MB Nand
* Ethernet: 2x GbE
* WLAN: 2x2 2.4GHz 574Mbps(builtin) + 2x2 5GHz 2400Mbps(qcn6122)
* BT: BT5.1(builtin) / nrf52840(option)
* LEDS: 1x power, 1x 2G, 1x 5G
* Buttons: 1x reset
* USB: 1x 2.0(Type-A)
* Power: DC 12V/2A, PoE 48V/0.6A
* UART: 1x RJ45

Flash instruction under U-Boot:
tftpboot 0x44000000 openwrt-ipq807x-muxi_ap3220l-squashfs-nand-factory.bin
imxtract 0x44000000 ubi
flash rootfs
reset

Signed-off-by: angliu-muxi <ang.liu@muxi-connect.com>
This commit is contained in:
John Crispin
2022-11-14 09:21:06 +01:00
parent b48506b156
commit a3d348b664
10 changed files with 945 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds
View File

@@ -50,6 +50,10 @@ glinet,ax1800|\
glinet,axt1800)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
;;
muxi,ap3220l)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
;;
esac
board_config_flush

11
feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network
View File

@@ -55,7 +55,8 @@ qcom_setup_interfaces()
liteon,wpx8324|\
wallys,dr6018|\
cig,wf188n|\
cig,wf196)
cig,wf196|\
muxi,ap3220l)
ucidef_set_interface_lan "eth1"
ucidef_set_interface_wan "eth0"
;;
@@ -123,6 +124,14 @@ qcom_setup_macs()
wan_mac=$(cat /sys/class/net/eth1/address)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
muxi,ap3220l)
wan_mac=$(mtd_get_mac_binary 0:Product_Info 0x5b)
lan_mac=$(macaddr_add "$wan_mac" 1)
ucidef_set_network_device_mac eth0 $wan_mac
ucidef_set_network_device_mac eth1 $lan_mac
ip link set eth0 address $wan_mac
ip link set eth1 address $lan_mac
;;
*)
wan_mac=$(cat /sys/class/net/eth0/address)
lan_mac=$(macaddr_add "$wan_mac" 1)

4
feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
View File

@@ -128,6 +128,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
edgecore,eap104|\
liteon,wpx8324|\
motorola,q14|\
muxi,ap3220l|\
qcom,ipq5018-mp03.1)
caldata_extract "0:ART" 0x1000 0x20000
;;
@@ -147,6 +148,9 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
liteon,wpx8324)
caldata_extract "0:ART" 0x4c000 0x20000
;;
muxi,ap3220l)
caldata_extract "0:ART" 0x26800 0x20000
;;
esac
;;
ath11k/QCN9074/hw1.0/caldata_1.bin)

2
feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh
View File

@@ -90,12 +90,14 @@ platform_check_image() {
hfcl,ion4x|\
hfcl,ion4x_2|\
hfcl,ion4xe|\
muxi,ap3220l|\
plasmacloud,pax1800-v1|\
plasmacloud,pax1800-v2|\
tplink,ex227|\
tplink,ex447|\
yuncore,ax840|\
motorola,q14|\
muxi,ap3220l|\
qcom,ipq6018-cp01|\
qcom,ipq807x-hk01|\
qcom,ipq807x-hk14|\

23
feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-muxi-ap3220l.dts Normal file
View File

@@ -0,0 +1,23 @@
/*
* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-muxi-ap3220l.dts"
/ {
pmuv8: pmu {
compatible = "arm,cortex-a7-pmu";
};
};

891
feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-muxi-ap3220l.dts Executable file
View File

@@ -0,0 +1,891 @@
/dts-v1/;
/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "qcom-ipq5018.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "MUXI AP3220L";
compatible = "muxi,ap3220l", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
interrupt-parent = <&intc>;
aliases {
serial0 = &blsp1_uart1;
serial1 = &blsp1_uart2;
ethernet0 = "/soc/dp1";
ethernet1 = "/soc/dp2";
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
#ifdef __IPQ_MEM_PROFILE_256_MB__
bootargs-append = " swiotlb=1";
#else
bootargs-append = " swiotlb=1 coherent_pool=2M";
#endif
stdout-path = "serial0";
};
reserved-memory {
#ifdef __IPQ_MEM_PROFILE_256_MB__
/* 256 MB Profile
* +==========+==============+=========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +----------+--------------+-------------------------+
* | NSS | 0x40000000 | 8MB |
* +----------+--------------+-------------------------+
* | Linux | 0x40800000 | Depends on total memory |
* +----------+--------------+-------------------------+
* | uboot | 0x4A600000 | 4MB |
* +----------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +----------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +----------+--------------+-------------------------+
* | TZ | 0x4AC00000 | 4MB |
* +----------+--------------+-------------------------+
* | Q6 | | |
* | code/ | 0x4B000000 | 20MB |
* | data | | |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | data | 0x4C400000 | 13MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | M3 Dump | 0x4D100000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | QDSS | 0x4D200000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | data | 0x4D300000 | 15MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | M3 Dump | 0x4E200000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | QDSS | 0x4E300000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | data | 0x4E400000 | 15MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | M3 Dump | 0x4F300000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | QDSS | 0x4F400000 | 1MB |
* +----------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +===================================================+
*/
q6_mem_regions: q6_mem_regions@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x4500000>;
};
q6_code_data: q6_code_data@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x1400000>;
};
q6_ipq5018_data: q6_ipq5018_data@4C400000 {
no-map;
reg = <0x0 0x4C400000 0x0 0xD00000>;
};
m3_dump: m3_dump@4D100000 {
no-map;
reg = <0x0 0x4D100000 0x0 0x100000>;
};
q6_etr_region: q6_etr_dump@4D200000 {
no-map;
reg = <0x0 0x4D200000 0x0 0x100000>;
};
q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
no-map;
reg = <0x0 0x4D300000 0x0 0xF00000>;
};
m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
no-map;
reg = <0x0 0x4E200000 0x0 0x100000>;
};
q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
no-map;
reg = <0x0 0x4E300000 0x0 0x100000>;
};
q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
no-map;
reg = <0x0 0x4E400000 0x0 0xF00000>;
};
m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
no-map;
reg = <0x0 0x4F300000 0x0 0x100000>;
};
q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
no-map;
reg = <0x0 0x4F400000 0x0 0x100000>;
};
#else
/* 512MB/1GB Profiles
* +==========+==============+=========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +----------+--------------+-------------------------+
* | NSS | 0x40000000 | 16MB |
* +----------+--------------+-------------------------+
* | Linux | 0x41000000 | Depends on total memory |
* +----------+--------------+-------------------------+
* | uboot | 0x4A600000 | 4MB |
* +----------+--------------+-------------------------+
* | SBL | 0x4AA00000 | 1MB |
* +----------+--------------+-------------------------+
* | smem | 0x4AB00000 | 1MB |
* +----------+--------------+-------------------------+
* | TZ | 0x4AC00000 | 4MB |
* +----------+--------------+-------------------------+
* | Q6 | | |
* | code/ | 0x4B000000 | 20MB |
* | data | | |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | data | 0x4C400000 | 14MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | M3 Dump | 0x4D200000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | QDSS | 0x4D300000 | 1MB |
* +----------+--------------+-------------------------+
* | IPQ5018 | | |
* | Caldb | 0x4D400000 | 2MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | data | 0x4D600000 | 16MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | M3 Dump | 0x4E600000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | QDSS | 0x4E700000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_1| | |
* | Caldb | 0x4E800000 | 5MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | data | 0x4ED00000 | 16MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | M3 Dump | 0x4FD00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | QDSS | 0x4FE00000 | 1MB |
* +----------+--------------+-------------------------+
* | QCN6122_2| | |
* | Caldb | 0x4FF00000 | 5MB |
* +----------+--------------+-------------------------+
* | |
* | Rest of the memory for Linux |
* | |
* +===================================================+
*/
q6_mem_regions: q6_mem_regions@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 0x5400000>;
};
q6_code_data: q6_code_data@4B000000 {
no-map;
reg = <0x0 0x4B000000 0x0 01400000>;
};
q6_ipq5018_data: q6_ipq5018_data@4C400000 {
no-map;
reg = <0x0 0x4C400000 0x0 0xE00000>;
};
m3_dump: m3_dump@4D200000 {
no-map;
reg = <0x0 0x4D200000 0x0 0x100000>;
};
q6_etr_region: q6_etr_dump@4D300000 {
no-map;
reg = <0x0 0x4D300000 0x0 0x100000>;
};
q6_caldb_region: q6_caldb_region@4D400000 {
no-map;
reg = <0x0 0x4D400000 0x0 0x200000>;
};
q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
no-map;
reg = <0x0 0x4D600000 0x0 0x1000000>;
};
m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
no-map;
reg = <0x0 0x4E600000 0x0 0x100000>;
};
q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
no-map;
reg = <0x0 0x4E700000 0x0 0x100000>;
};
q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
no-map;
reg = <0x0 0x4E800000 0x0 0x500000>;
};
q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
no-map;
reg = <0x0 0x4ED00000 0x0 0x1000000>;
};
m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
no-map;
reg = <0x0 0x4FD00000 0x0 0x100000>;
};
q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
no-map;
reg = <0x0 0x4FE00000 0x0 0x100000>;
};
q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
no-map;
reg = <0x0 0x4FF00000 0x0 0x500000>;
};
#endif
};
soc {
blsp1_uart1: serial@78af000 {
pinctrl-0 = <&blsp0_uart_pins>;
pinctrl-names = "default";
status = "okay";
};
blsp1_uart2: serial@78b0000 {
pinctrl-0 = <&blsp1_uart_pins>;
pinctrl-names = "default";
status = "disabled";
};
qpic_bam: dma@7984000{
status = "ok";
};
nand: qpic-nand@79b0000 {
pinctrl-0 = <&qspi_nand_pins>;
pinctrl-names = "default";
status = "ok";
};
spi_0: spi@78b5000 { /* BLSP1 QUP0 */
pinctrl-0 = <&blsp0_spi_pins>;
pinctrl-names = "default";
cs-select = <0>;
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
linux,modalias = "m25p80", "n25q128a11";
spi-max-frequency = <50000000>;
use-default-sizes;
};
};
mdio0: mdio@88000 {
status = "ok";
ethernet-phy@0 {
reg = <7>;
};
};
mdio1: mdio@90000 {
status = "ok";
pinctrl-0 = <&mdio1_pins &phy_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 39 0>;
ethernet-phy@0 {
reg = <0>;
};
ethernet-phy@1 {
reg = <1>;
};
ethernet-phy@2 {
reg = <2>;
};
ethernet-phy@3 {
reg = <3>;
};
};
ess-instance {
num_devices = <0x2>;
ess-switch@0x39c00000 {
compatible = "qcom,ess-switch-ipq50xx";
device_id = <0>;
switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
qcom,port_phyinfo {
port@0 {
port_id = <1>;
phy_address = <7>;
};
port@1 {
port_id = <2>;
forced-speed = <1000>;
forced-duplex = <1>;
};
};
/*
led_source@0 {
source = <0>;
mode = "normal";
speed = "all";
blink_en = "enable";
active = "high";
};
*/
};
ess-switch1@1 {
compatible = "qcom,ess-switch-qca83xx";
device_id = <1>;
switch_access_mode = "mdio";
mdio-bus = <&mdio1>;
reset_gpio = <0x27>;
switch_cpu_bmp = <0x40>; /* cpu port bitmap */
switch_lan_bmp = <0x1e>; /* lan port bitmap */
switch_wan_bmp = <0x0>; /* wan port bitmap */
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x00010 0x2613a0 /* PORT6 FORCE MODE*/
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
qcom,port_phyinfo {
port@0 {
port_id = <1>;
phy_address = <0>;
};
port@1 {
port_id = <2>;
phy_address = <1>;
};
port@2 {
port_id = <3>;
phy_address = <2>;
};
port@3 {
port_id = <4>;
phy_address = <3>;
};
};
};
};
ess-uniphy@98000 {
status = "disabled";
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
clock-names = "nss-snoc-gmac-axi-clk";
qcom,id = <1>;
reg = <0x39C00000 0x10000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
qcom,mactype = <2>;
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <7>;
mdio-bus = <&mdio0>;
local-mac-address = [000000000000];
phy-mode = "sgmii";
};
dp2 {
device_type = "network";
compatible = "qcom,nss-dp";
clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
clock-names = "nss-snoc-gmac-axi-clk";
qcom,id = <2>;
reg = <0x39D00000 0x10000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
qcom,mactype = <2>;
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <3>;
mdio-bus = <&mdio1>;
local-mac-address = [000000000000];
phy-mode = "sgmii";
};
qcom,test@0 {
status = "ok";
};
};
thermal-zones {
status = "ok";
};
};
&tlmm {
//pinctrl-0 = <&phy_led_pins>;
pinctrl-names = "default";
blsp0_uart_pins: uart_pins {
blsp0_uart_rx_tx {
pins = "gpio20", "gpio21";
function = "blsp0_uart0";
bias-disable;
};
};
blsp1_uart_pins: blsp1_uart_pins {
blsp1_uart_rx_tx {
pins = "gpio23", "gpio25";
function = "blsp1_uart2";
bias-disable;
};
};
blsp0_spi_pins: blsp0_spi_pins {
mux {
pins = "gpio10", "gpio11", "gpio12", "gpio13";
function = "blsp0_spi";
drive-strength = <2>;
bias-disable;
};
};
qspi_nand_pins: qspi_nand_pins {
qspi_clock {
pins = "gpio9";
function = "qspi_clk";
drive-strength = <8>;
bias-disable;
};
qspi_cs {
pins = "gpio8";
function = "qspi_cs";
drive-strength = <8>;
bias-disable;
};
qspi_data_0 {
pins = "gpio7";
function = "qspi0";
drive-strength = <8>;
bias-disable;
};
qspi_data_1 {
pins = "gpio6";
function = "qspi1";
drive-strength = <8>;
bias-disable;
};
qspi_data_2 {
pins = "gpio5";
function = "qspi2";
drive-strength = <8>;
bias-disable;
};
qspi_data_3 {
pins = "gpio4";
function = "qspi3";
drive-strength = <8>;
bias-disable;
};
};
phy_pins: phy_pins {
phy_intr {
pins = "gpio29";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
bias-disable;
};
phy_reset {
pins = "gpio39";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
output-low;
};
};
mdio1_pins: mdio_pinmux {
mux_0 {
pins = "gpio36";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio37";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
phy_led_pins: phy_led_pins {
gephy_led_pin {
//pins = "gpio46";
function = "led0";
drive-strength = <8>;
bias-pull-down;
};
};
button_pins: button_pins {
reset_button {
pins = "gpio32";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
led_pins: led_pins {
led_pwr {
pins = "gpio26";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_2g {
pins = "gpio31";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_5g {
pins = "gpio33";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
button@1 {
label = "reset_button";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: led_pwr {
label = "green:led_pwr";
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "led_pwr";
};
led_2g {
label = "green:wifi2";
gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led_5g {
label = "green:wifi5";
gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
&usb3 {
status = "ok";
device-power-gpio = <&tlmm 30 1>;
};
&eud {
status = "ok";
};
&pcie_x1 {
status = "disabled";
perst-gpio = <&tlmm 18 1>;
};
&pcie_x2 {
status = "disabled";
perst-gpio = <&tlmm 15 1>;
};
&dwc_0 {
/delete-property/ #phy-cells;
/delete-property/ phys;
/delete-property/ phy-names;
};
&hs_m31phy_0 {
status = "ok";
};
&pcie_x1phy {
status = "disabled";
};
&pcie_x2phy {
status = "disabled";
};
&pcie_x1_rp {
status = "disabled";
mhi_0: qcom,mhi@0 {
reg = <0 0 0 0 0 >;
};
};
&pcie_x2_rp {
status = "disabled";
mhi_1: qcom,mhi@1 {
reg = <0 0 0 0 0 >;
};
};
&qfprom {
status = "ok";
};
&tsens {
status = "ok";
};
&qcom_q6v5_wcss {
qcom,multipd_arch;
memory-region = <&q6_mem_regions>;
qcom,share_bootargs;
qcom,bootargs_smem = <507>;
boot-args = <0x2 0x4 0x2 0xF 0x0 0x0>;
/* IPQ5018 */
q6v5_wcss_userpd1 {
m3_firmware = "IPQ5018/m3_fw.mdt";
interrupts-extended = <&wcss_smp2p_in 8 0>,
<&wcss_smp2p_in 9 0>,
<&wcss_smp2p_in 12 0>,
<&wcss_smp2p_in 11 0>;
interrupt-names ="fatal",
"ready",
"spawn_ack",
"stop-ack";
qcom,smem-states = <&wcss_smp2p_out 8>,
<&wcss_smp2p_out 9>,
<&wcss_smp2p_out 10>;
qcom,smem-state-names = "shutdown",
"stop",
"spawn";
qca,asid = <1>;
qca,auto-restart;
qca,int_radio;
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_ipq5018_data>, <&m3_dump>,
<&q6_etr_region>;
#else
memory-region = <&q6_ipq5018_data>, <&m3_dump>,
<&q6_etr_region>, <&q6_caldb_region>;
#endif
};
/* QCN6122 6G */
q6v5_wcss_userpd2 {
m3_firmware = "qcn6122/m3_fw.mdt";
interrupts-extended = <&wcss_smp2p_in 16 0>,
<&wcss_smp2p_in 17 0>,
<&wcss_smp2p_in 20 0>,
<&wcss_smp2p_in 19 0>;
interrupt-names ="fatal",
"ready",
"spawn_ack",
"stop-ack";
qcom,smem-states = <&wcss_smp2p_out 16>,
<&wcss_smp2p_out 17>,
<&wcss_smp2p_out 18>;
qcom,smem-state-names = "shutdown",
"stop",
"spawn";
qca,asid = <2>;
qca,auto-restart;
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
<&q6_qcn6122_etr_1>;
#else
memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
#endif
};
/* QCN6122 5G */
q6v5_wcss_userpd3 {
m3_firmware = "qcn6122/m3_fw.mdt";
interrupts-extended = <&wcss_smp2p_in 24 0>,
<&wcss_smp2p_in 25 0>,
<&wcss_smp2p_in 28 0>,
<&wcss_smp2p_in 27 0>;
interrupt-names ="fatal",
"ready",
"spawn_ack",
"stop-ack";
qcom,smem-states = <&wcss_smp2p_out 24>,
<&wcss_smp2p_out 25>,
<&wcss_smp2p_out 26>;
qcom,smem-state-names = "shutdown",
"stop",
"spawn";
qca,asid = <3>;
qca,auto-restart;
#ifdef __IPQ_MEM_PROFILE_256_MB__
memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
<&q6_qcn6122_etr_2>;
#else
memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
#endif
};
};
&qgic_msi_0 {
status = "ok";
};
&qgic_msi_1 {
status = "ok";
};
&wifi0 {
/* IPQ5018 */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x24>;
qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
#else
qcom,caldb-addr = <0x4D400000>;
m3-dump-addr = <0x4D200000>;
#endif
qcom,caldb-size = <0x200000>;
status = "ok";
};
&wifi1 {
/* QCN6122 6G */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x60>;
qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
#else
qcom,caldb-addr = <0x4E800000>;
m3-dump-addr = <0x4E600000>;
#endif
qcom,caldb-size = <0x500000>;
status = "disabled";
};
&wifi2 {
/* QCN6122 5G */
qcom,multipd_arch;
qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
#ifdef __IPQ_MEM_PROFILE_256_MB__
qcom,tgt-mem-mode = <2>;
#else
qcom,tgt-mem-mode = <1>;
#endif
qcom,board_id = <0x60>;
qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
#ifdef __CNSS2__
qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
#else
qcom,caldb-addr = <0x4FF00000>;
m3-dump-addr = <0x4FD00000>;
#endif
qcom,caldb-size = <0x500000>;
status = "ok";
};

9
feeds/ipq807x/ipq807x/image/ipq50xx.mk
View File

@@ -27,6 +27,15 @@ define Device/liteon_wpx8324
endef
TARGET_DEVICES += liteon_wpx8324
define Device/muxi_ap3220l
DEVICE_TITLE := MUXI AP3220L
DEVICE_DTS := qcom-ipq5018-muxi-ap3220l
SUPPORTED_DEVICES := muxi,ap3220l
DEVICE_PACKAGES := ath11k-wifi-muxi-ap3220l ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
DEVICE_DTS_CONFIG := config@mp03.5-c1
endef
TARGET_DEVICES += muxi_ap3220l
define Device/motorola_q14
DEVICE_TITLE := Motorola Q14
DEVICE_DTS := qcom-ipq5018-q14

2
feeds/wifi-ax/ath11k-wifi/Makefile
View File

@@ -40,6 +40,7 @@ ALLWIFIBOARDS:= \
indio-um-310ax-v1 \
indio-um-510axp-v1 \
indio-um-510axm-v1 \
muxi-ap3220l \
plasmacloud-pax1800 \
wallys-dr6018 \
wallys-dr6018-v4 \
@@ -252,6 +253,7 @@ $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
$(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
$(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))
$(eval $(call generate-ath11k-wifi-package,meshpp-s618,Mesh++ S618))
$(eval $(call generate-ath11k-wifi-package,muxi-ap3220l,MUXI AP3220L))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
$(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))

BIN
feeds/wifi-ax/ath11k-wifi/board-muxi-ap3220l.bin.IPQ5018 Normal file
View File

Binary file not shown.

BIN
feeds/wifi-ax/ath11k-wifi/board-muxi-ap3220l.bin.QCN6122 Normal file
View File

Binary file not shown.