scottk/wlan-ap
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-10-28 17:12:22 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ipq60xx: Support EMPLUS WAP386V2 model

Browse Source 
Device specifications:
======================

SoC: Qualcomm IPQ6018
RAM: 1 x 1G DDR4 RAM
Flash: NAND 128MB
Radio: 2T2R@2.4GHz, 2T2R@5GHz
Ethernet: 1 x 1GbE PHY
Reset Button: 1
Power Source: AC, Standard PoE 802.3af/at
LED Indicator: 4 x Single-color LED indicator (GPIO Control)

Signed-off-by: Jesse Wu <Jesse.Wu@emplustech.com>
This commit is contained in:
Jesse Wu
2025-05-28 18:25:48 +08:00
committed by John Crispin
parent 2b26a4e68a
commit dc41a0fd0c
9 changed files with 409 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
feeds/ipq807x_v5.4/ath11k-wifi/Makefile
View File

@@ -41,6 +41,7 @@ ALLWIFIBOARDS:= \
edgecore-oap102 \
edgecore-oap103 \
edgecore-eap104 \
emplus-wap386v2 \
liteon-wpx8324 \
indio-um-310ax-v1 \
indio-um-510axp-v1 \
@@ -404,6 +405,7 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
$(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
$(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
$(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
$(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
$(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
$(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))

6
feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds
View File

@@ -26,6 +26,12 @@ edgecore,eap101)
ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
;;
emplus,wap386v2)
ucidef_set_led_default "power" "POWER" "red:power" "on"
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
;;
hfcl,ion4xi|\
hfcl,ion4x|\
hfcl,ion4x_2|\

7
feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network
View File

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
ucidef_set_interface_lan "eth1"
ucidef_set_interface_wan "eth0"
;;
cig,wf660a)
cig,wf660a|\
emplus,wap386v2)
ucidef_set_interface_wan "eth0"
;;
yuncore,fap650)
ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
ucidef_set_interface_wan "eth4"
@@ -76,6 +76,9 @@ qcom_setup_macs()
ucidef_set_network_device_mac eth0 $wan_mac
ip link set eth0 address $wan_mac
;;
emplus,wap386v2)
wan_mac=$(cat /sys/class/net/eth0/address)
;;
yuncore,ax840)
wan_mac=$(cat /sys/class/net/eth1/address)
lan_mac=$(macaddr_add "$wan_mac" 1)

4
feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
View File

@@ -76,6 +76,7 @@ case "$FIRMWARE" in
cig,wf188n|\
cig,wf660a|\
edgecore,eap101|\
emplus,wap386v2|\
hfcl,ion4xi|\
hfcl,ion4x|\
hfcl,ion4x_2|\
@@ -109,7 +110,8 @@ ath11k-macs)
edgecore,eap101)
ath11k_generate_macs_eap101
;;
cig,wf188n)
cig,wf188n|\
emplus,wap386v2)
ath11k_generate_macs
;;
cig,wf660a)

4
feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh
View File

@@ -122,6 +122,7 @@ platform_check_image() {
wallys,dr6018|\
wallys,dr6018-v4|\
edgecore,eap101|\
emplus,wap386v2|\
hfcl,ion4xi|\
hfcl,ion4x|\
hfcl,ion4x_2|\
@@ -145,7 +146,8 @@ platform_do_upgrade() {
cig,wf660a)
spi_nor_emmc_do_upgrade_bootconfig $1
;;
cig,wf188n)
cig,wf188n|\
emplus,wap386v2)
[ -f /proc/boot_info/rootfs/upgradepartition ] && {
CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
CI_BOOTCFG=1

356
feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts Normal file
View File

@@ -0,0 +1,356 @@
/*
* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
#include "ipq6018.dtsi"
#include "ipq6018-cpr-regulator.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Emplus WAP386 v2";
compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
aliases {
/*
* Aliases as required by u-boot
* to patch MAC addresses
*/
ethernet0 = "/soc/dp1";
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-append = " swiotlb=1 coherent_pool=2M";
};
/*
* +=========+==============+========================+
* | | | |
* | Region | Start Offset | Size |
* | | | |
* +--------+--------------+-------------------------+
* | | | |
* | | | |
* | | | |
* | | | |
* | Linux | 0x41000000 | 139MB |
* | | | |
* | | | |
* | | | |
* +--------+--------------+-------------------------+
* | TZ App | 0x49B00000 | 6MB |
* +--------+--------------+-------------------------+
*
* From the available 145 MB for Linux in the first 256 MB,
* we are reserving 6 MB for TZAPP.
*
* Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
* for memory layout.
*/
/* TZAPP is enabled only in default memory profile */
#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
reserved-memory {
tzapp:tzapp@49B00000 { /* TZAPPS */
no-map;
reg = <0x0 0x49B00000 0x0 0x00600000>;
};
};
#endif
};
&tlmm {
gpio-reserved-ranges = <20 1>;
uart_pins: uart_pins {
mux {
pins = "gpio44", "gpio45";
function = "blsp2_uart";
drive-strength = <8>;
bias-pull-down;
};
};
spi_0_pins: spi_0_pins {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41";
function = "blsp0_spi";
drive-strength = <8>;
bias-pull-down;
};
};
button_pins: button_pins {
reset_button {
pins = "gpio9";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
mdio_pins: mdio_pinmux {
mux_0 {
pins = "gpio64";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mux_1 {
pins = "gpio65";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
mux_2 {
pins = "gpio75";
function = "gpio";
bias-pull-up;
};
};
leds_pins: leds_pins {
led_5g {
pins = "gpio31";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_2g {
pins = "gpio30";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
};
&soc {
mdio@90000 {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 75 0>;
status = "ok";
phy0: ethernet-phy@0 {
reg = <3>;
};
phy1: ethernet-phy@1 {
reg = <4>;
};
};
ess-switch@3a000000 {
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
switch_lan_bmp = <0x08>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
switch_inner_bmp = <0xc0>; /*inner port bitmap*/
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
qcom,port_phyinfo {
port@0 {
port_id = <2>;
phy_address = <3>;
};
port@1 {
port_id = <3>;
phy_address = <4>;
};
};
};
dp1 {
device_type = "network";
compatible = "qcom,nss-dp";
qcom,id = <3>;
reg = <0x3a001400 0x200>;
qcom,mactype = <0>;
local-mac-address = [000000000000];
qcom,link-poll = <1>;
qcom,phy-mdio-addr = <4>;
phy-mode = "sgmii";
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
button@9 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
led_power: led@28 {
label = "red:power";
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "wap386v2:red:power";
default-state = "on";
};
led@29 {
label = "blue:wan";
gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "wap386v2:blue:eth";
default-state = "on";
};
led@30 {
label = "blue:wifi2";
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "wap386v2:blue:2g";
default-state = "on";
};
led@31 {
label = "blue:wifi5";
gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "wap386v2:blue:5g";
default-state = "on";
};
};
};
&blsp1_uart3 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
status = "ok";
};
&spi_0 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-select = <0>;
status = "ok";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
linux,modalias = "m25p80", "n25q128a11";
spi-max-frequency = <50000000>;
use-default-sizes;
};
};
&wifi0 {
qcom,board_id = <0x30>;
};
&pcie_phy {
status = "ok";
};
&pcie0 {
#if defined(__CNSS2__)
status = "ok";
#endif
};
&qpic_bam {
status = "ok";
};
&qpic_nand {
status = "ok";
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
};
};
&ssphy_0 {
status = "ok";
};
&nss_crypto {
status = "ok";
};
&CPU0 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1320000 1100000
1440000 1100000
1608000 1100000
1800000 1100000
>;
clock-latency = <200000>;
};
&CPU1 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1320000 1100000
1440000 1100000
1608000 1100000
1800000 1100000
>;
clock-latency = <200000>;
};
&CPU2 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1320000 1100000
1440000 1100000
1608000 1100000
1800000 1100000
>;
clock-latency = <200000>;
};
&CPU3 {
operating-points = <
/* kHz uV (fixed) */
864000 1100000
1056000 1100000
1320000 1100000
1440000 1100000
1608000 1100000
1800000 1100000
>;
clock-latency = <200000>;
};
&rpm_glink {
status = "disabled";
};

9
feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk
View File

@@ -76,6 +76,15 @@ define Device/edgecore_eap101
endef
TARGET_DEVICES += edgecore_eap101
define Device/emplus_wap386v2
DEVICE_TITLE := Emplus WAP386v2
DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
DEVICE_DTS_CONFIG := config@cp03-c1
SUPPORTED_DEVICES := emplus,wap386v2
DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
endef
TARGET_DEVICES += emplus_wap386v2
define Device/indio_um-310ax-v1
DEVICE_TITLE := Indio UM-310AX V1
DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

1
feeds/tip/certificates/files/usr/bin/mount_certs
View File

@@ -88,6 +88,7 @@ cig,wf189h|\
cig,wf186h|\
cig,wf196|\
cig,wf188n|\
emplus,wap386v2|\
yuncore,ax840|\
yuncore,fap655)
PART_NAME=rootfs_1

24
profiles/emplus_wap386v2.yml Normal file
View File

@@ -0,0 +1,24 @@
---
profile: emplus_wap386v2
target: ipq60xx
subtarget: generic
description: Build image for the EMPLUS WAP386V2
image: bin/targets/ipq60xx/generic/openwrt-ipq60xx-emplus_wap386v2-squashfs-sysupgrade.tar
feeds:
- name: ipq807x
path: ../../feeds/ipq807x_v5.4
include:
- ucentral-ap
packages:
- ipq60xx
- iperf3
diffconfig: |
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_BUSYBOX_CONFIG_TFTP=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_HPA_COMPAT=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
CONFIG_BUSYBOX_CONFIG_LSOF=y
CONFIG_BUSYBOX_CONFIG_MPSTAT=y
CONFIG_BUSYBOX_CONFIG_PSTREE=y