During 802.11r Fast Transition roaming, when a client moves between
APs (e.g., wlan0 to wlan1) with the same dynamic VLAN assignment, the
vlan_add handler's refcount mechanism prevented the new WiFi interface
from being added to the bridge.
When wlan0-v100 and wlan1-v100 exist simultaneously with VLAN ID 100,
the refcount becomes 2, causing vlan_add to exit early for wlan1-v100.
This left wlan1-v100 out of the bridge VLAN table, breaking connectivity
after roaming despite correct VLAN assignment via RADIUS and RRB frames.
Fix by detecting WiFi VLAN interfaces (wlan*-v*) and always adding them
to the bridge regardless of refcount. The refcount mechanism now only
controls WAN port VLAN configuration, which should only occur once per
VLAN ID.
Also reorganise vlan_add/vlan_remove to check swconfig early for clarity.
Signed-off-by: John Crispin <john@phrozen.org>
When a station roams between bands on the same VLAN, the vlan_remove
event from the old band can arrive after the vlan_add event from the
new band, causing the VLAN to be incorrectly deleted whilst still in use.
Add reference counting that tracks how many interfaces are using each
VLAN ID. Only create VLAN devices on the first reference and only
remove them when the last reference is dropped.
On startup, initialise refcounts from current station state to handle
daemon restarts correctly.
Signed-off-by: John Crispin <john@phrozen.org>
676e155 dhcp_inject: fix a syntax issue in dhcp_inject
e594c44 captive.uam.mac-auth: the default was wrong
Signed-off-by: John Crispin <john@phrozen.org>
Set max_ap_assoc at wiphy init instead of vif init for mt7915.
Hard code max_ap_assoc to 128 for EAP112 in wifi_max_user.uc
Fixes WIFI-15027
Signed-off-by: Arif Alam <arif.alam@netexperience.com>
100c045 Fix cloud cannot show association list when WDS-AP in state.uc
168f6a4 dhcp_inject: Support multiple upstream
Signed-off-by: John Crispin <john@phrozen.org>
Ensure that LEDs are configured to be ON before attempting to change their state.
Previously, if the LED was configured to be OFF, it would still enter a double-blink
state when the cloud connection was lost, and then switch to solid ON upon
reconnection—ignoring the configured OFF state.
This update changes that behavior:
- If LEDs are configured OFF, they will remain OFF even during cloud
disconnection (no double-blink).
- After temporary state changes (e.g., during factory reset), the LED will
return to its configured state (either OFF or ON).
Signed-off-by: Paul White <paul@shasta.cloud>
92fb3c1 WIFI-14901: Add rrm_chanutil status to health.uc (when it fails) and save health metric in /tmp/ucentral.health
6313892 WIFI-14906: Add 'sync' after file generation in Cloud discovery process
Signed-off-by: John Crispin <john@phrozen.org>
b971b73 Support HaLow Mesh on EAP112
7d28320 Fix in ucode script of config_raw to add multiple UCI sections via config-raw object of the schema
1453f2e chanUtil per radio shall be obtained from the policy_chanutil.uc script
fa26853 enable multiple bssid by default on 6G
Signed-off-by: John Crispin <john@phrozen.org>
Rate limiting was not applied on WiFi-7 devices because their
hostapd interface names use the phy* prefix instead of wlan*.
This patch extends the match pattern to include both wlan* and phy*.
Fixes: WIFI-14884
Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>
1. For EAP112 LTE module (Quectel EM60 series), when username and password is configured, it is required to update the context with the QICSGP AT command.
2. Use a handler function to check if the AT command is stuck and retry.
Fixes: WIFI-14545
Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>
1. Copy modemmanager to feeds/ucentral.
2. Add function to find the device sysfs path when protocol is "wwan".
3. Call ifup when modem is ready for connection.
4. Add trigger to restart modemmanager when network uci is updated.
Fixes: WIFI-14751
Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>
2819f87 HaLow: fix channel 8/24/40 cannot be set
3b04c09 HaLow: set default channel to avoid HaLow not working when no channel set by JSON
Signed-off-by: John Crispin <john@phrozen.org>
2b8a58b dont crash if udevmand does not reply
985f3cb WIFI-14588: Cloud Package Manager
Fixes: WIFI-14752
Signed-off-by: John Crispin <john@phrozen.org>
Support user to control PSE on/off (chip: tps23861) via ucentral config file.
Use uci-default to write poe's uci default file.
Fixes: WIFI-14724
Signed-off-by: jackcybertan <jack.tsai@cybertan.com.tw>
125a148 add PoE support for client ports
17b6c18 Cloud Package Manager
a86b8b0 Fix typo in enhanced MPSK property name
57852ed update schema.json to 4.1.0
e155483 command: update upgrade and factory commands to handle new operational certs
Signed-off-by: John Crispin <john@phrozen.org>
