Ensure that LEDs are configured to be ON before attempting to change their state.
Previously, if the LED was configured to be OFF, it would still enter a double-blink
state when the cloud connection was lost, and then switch to solid ON upon
reconnection—ignoring the configured OFF state.
This update changes that behavior:
- If LEDs are configured OFF, they will remain OFF even during cloud
disconnection (no double-blink).
- After temporary state changes (e.g., during factory reset), the LED will
return to its configured state (either OFF or ON).
Signed-off-by: Paul White <paul@shasta.cloud>
92fb3c1 WIFI-14901: Add rrm_chanutil status to health.uc (when it fails) and save health metric in /tmp/ucentral.health
6313892 WIFI-14906: Add 'sync' after file generation in Cloud discovery process
Signed-off-by: John Crispin <john@phrozen.org>
b971b73 Support HaLow Mesh on EAP112
7d28320 Fix in ucode script of config_raw to add multiple UCI sections via config-raw object of the schema
1453f2e chanUtil per radio shall be obtained from the policy_chanutil.uc script
fa26853 enable multiple bssid by default on 6G
Signed-off-by: John Crispin <john@phrozen.org>
Rate limiting was not applied on WiFi-7 devices because their
hostapd interface names use the phy* prefix instead of wlan*.
This patch extends the match pattern to include both wlan* and phy*.
Fixes: WIFI-14884
Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>
1. For EAP112 LTE module (Quectel EM60 series), when username and password is configured, it is required to update the context with the QICSGP AT command.
2. Use a handler function to check if the AT command is stuck and retry.
Fixes: WIFI-14545
Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>
1. Copy modemmanager to feeds/ucentral.
2. Add function to find the device sysfs path when protocol is "wwan".
3. Call ifup when modem is ready for connection.
4. Add trigger to restart modemmanager when network uci is updated.
Fixes: WIFI-14751
Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>
2819f87 HaLow: fix channel 8/24/40 cannot be set
3b04c09 HaLow: set default channel to avoid HaLow not working when no channel set by JSON
Signed-off-by: John Crispin <john@phrozen.org>
2b8a58b dont crash if udevmand does not reply
985f3cb WIFI-14588: Cloud Package Manager
Fixes: WIFI-14752
Signed-off-by: John Crispin <john@phrozen.org>
Support user to control PSE on/off (chip: tps23861) via ucentral config file.
Use uci-default to write poe's uci default file.
Fixes: WIFI-14724
Signed-off-by: jackcybertan <jack.tsai@cybertan.com.tw>
125a148 add PoE support for client ports
17b6c18 Cloud Package Manager
a86b8b0 Fix typo in enhanced MPSK property name
57852ed update schema.json to 4.1.0
e155483 command: update upgrade and factory commands to handle new operational certs
Signed-off-by: John Crispin <john@phrozen.org>
9710867 (HEAD -> main, origin/main, origin/HEAD) make the MTU configurable on GRE tunnels
4dd0904 SSH IdleTimeout can be configured from JSON config
6faaa1f HaLow: Extend ucentral schema & state for HaLow
Signed-off-by: John Crispin <john@phrozen.org>
6faaa1f HaLow: Extend ucentral schema & state for HaLow
aa9cac5 dhcp_inject: Use same keyword "dhcp-inject" in config file
Signed-off-by: John Crispin <john@phrozen.org>
Added check when parsing ssid info retrieved from iwinfo.
Program will exit if expected interface count and iwinfo entry count mismatch.
Fixes: WIFI-14564
Signed-off-by: alex18_huang <alex18_huang@accton.com>
- avoid calculated Channel Utilization value to be 'infinity' from cycle_count_delta being '0'
Fixes: WIFI-14536
Signed-off-by: Tanya Singh <tanya_singh@accton.com>
Program sometimes did not setup tc qdisc on some interfaces when creating SSID with dhcpinject enabled initially.
Added delayed startup.
Fixes: WIFI-14522
Signed-off-by: alex18_huang <alex18_huang@accton.com>
