This includes shell script for host side support of the 'hci_uart' MCU
firmware type. The script calls 'btattach' with matching tty interface
and baud rate as arguments, resulting in new Bluetooth HCI controller
registration in the system. Both UART and USB interfaces are supported.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This adds support for executing a host side support script per firmware
type (in our case, full MCU firmware name is a combination of two terms:
'version__type', e.g. 'zephyr-v3.3.x__hci_uart') which currently runs on
the MCU. Additionally, support for calling the init script with 'stop'
argument is included.
The host side support scripts will be placed in '/etc/mcu.d/' and should
have executable flag set and be named after the firmware type, with 'sh'
extension (e.g. 'hci_uart.sh'). This solution assumes also that PID of a
running, related service will be stored in '/var/run/mcu.SN.pid' where
'SN' is the associated MCU serial number.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
In case of some of the MCU firmware types, additional setup on the host
side is required before the target application can be used. Example of
such a requirement is a BLE HCI controller on UART bus (firmware type:
'hci_uart') which, before can be registered in system, needs to be
attached to Bluetooth stack (with e.g. 'btattach').
This includes code for generating hidden packages under 'mcu-firmware'
with all the files required for host side support (stored in directory
with the same name as firmware type, under local 'files' directory),
for a selected MCU firmware. For example, below tree:
./feeds/mcu/mcu-firmware/files/hci_uart/etc/...
would result in creation of new package 'zephyr-hci_uart-host-support',
included in dependencies lists for all MCU firmware versions of the
'hci_uart' type, with everything from '.../files/hci_uart/'.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This reduces amount of helper functions and fixes also global variables
handle inside 'mcu.sh' and 'mcu.hotplug' shell scripts. While at it,
provide additional debug information when fetching images list and
system information.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This includes simple upgrade (downgrade) capability in the MCU support
package. If hash of firmware installed on the MCU doesn't match the one
available on host's local file system, it will get upgraded.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Copy 'bluez' package from OpenWrt's packages master branch to 'ucentral'
feed so that we can use latest version and add custom, local changes.
Keep this within 'ucentral' feeds directory to override version provided
by community based 'packages' feed from OpenWrt 21.02.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
54453a6 cmd_script: custom scripts with no uri failed to send the stdout to the server
Fixes: WIFI-12358
Signed-off-by: John Crispin <john@phrozen.org>
In case of some types of MCU firmware, additional tools, daemons, kernel
drivers, etc. are required on the host side. For example, for Bluetooth
HCI controller, at least kernel module and BlueZ should be included.
This adds a simple recipe which generates dependencies list per firmware
type/name and for existing 'hci_usb' and 'hci_uart', selects 3 packages:
'bluez-daemon', 'kmod-bluetooth' and 'kmod-crypto-user'.
Kernel crypto interface in user space has to be also included because
the BlueZ isn't able to create static address for LE-only controller
without it, which results in no registration of new BT interface:
bluetoothd[668]: src/adapter.c:get_static_addr() Failed to open crypto
bluetoothd[668]: No Bluetooth address for index 0
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This includes default configuration for the on-board Nordic nRF52833 MCU
in CIG WF-196. A Zephyr based sample 'hci_uart' firmware is selected.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Include Zephyr v3.3.x based Bluetooth LE HCI UART firmware package in
default packages list for the CIG WF-196. This brings initial support
for the on-board nRF52833 MCU.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This includes default configuration for the on-board Nordic nRF52840 MCU
in EdgeCore EAP102. A Zephyr based sample 'hci_usb' firmware is selected.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Include Zephyr v3.3.x based Bluetooth LE HCI USB firmware package in
default packages list for the EdgeCore EAP102. This brings initial
support for the on-board nRF52840 MCU.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This adds Zephyr firmware builds from custom git branch based on the
latest's upstream branch name 'main': 'main__mcu-on-wifi-boards'.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The new 'mcu-firmware' package will provide binary firmware dedicated
for MCU embedded on Wi-Fi boards (and also standalone, e.g. USB based),
supported by the OpenWrt/OpenWiFi projects. Currently, only Zephyr RTOS
based sample firmware ('BLE HCI controller' and 'hello world') files are
provided, for Wi-Fi boards and one standalone development module, listed
below:
- CIG WF-196 (Nordic nRF52833, UART bus)
- EdgeCore EAP102 (Nordic nRF52840, USB bus)
- Nordic nRF52840 Dongle (Nordic nRF52840, USB bus)
Different firmware types planned in future include Nordic's nRF Connect
SDK, OpenThread and others.
The Zephyr based firmware comes from a custom fork available in GitLab:
'https://gitlab.com/pepe2k/zephyr' (firmware in this package were built
from a v3.3.0 release based branch 'zephyr-v3.3.x__mcu-on-wifi-boards').
MCU firmware from this package is compatible only with OpenWrt/OpenWiFi
generic MCU support stack which, among others, assumes availability of
compatible bootloader (MCUboot is currently the only one supported) and
e.g. multiple firmware slots. MCUboot fork development takes part in git
repository hosted in GitLab: 'https://gitlab.com/pepe2k/mcuboot/'.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This adds support for creating initial MCU configuration with use of
'uci-defaults' in a same was as for example 'uboot-envtools' package.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
On device running OpenWiFi with uCentral, additional copy of the initial
UCI configuration will be generated in '/etc/config-shadow/'. As part of
the MCU configuration is done during runtime, after the 'config-shadow'
is created, we should update it as well to keep everything in sync.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This introduces new package 'mcu' which is a collection of shell based
scripts used as glue code for generic MCU configuration and management.
The scripts are responsible for communicating with embedded MCU running
compatible MCUboot bootloader version over MCUmgr/SMP protocol.
The communication is realized based on usage of the introduced earlier
dedicated CLI tool called 'umcumgr.
The most important function of this package is a simple MCU's firmware
management (checking firmware available in the MCU's internal flash,
uploading new and selecting active on multi-firmware slot capable MCU).
This solution requires MCU running modified version of MCUboot,
available in GitLab: https://gitlab.com/pepe2k/mcuboot
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The 'umcumgr' is a simple command line tool for MCU firmware management
over MCUmgr/SMP protocol. It will be used together with MCUboot running
on the on-board (or external, e.g. in form of a dongle) MCU.
While at it, add also dedicated 'mcu.yml' profile file.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This backports more fixes for the Bluetooth subsystem from 4.9.
They were found missing during some initial Bluetooth LE testing.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This backports an essential fix for Bluetooth LE-only HCI devices from
kernel 4.9: 39385cb5f327 ("Bluetooth: Fix using the correct source
address type").
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
