Shubham Vishwakarma
7beac05946
ipq807x: add support for indio um345ax
...
**SPECIFICATION:**
- Chipset: IPQ8072A+QCN5054+QCN5024+QCA80812
- Flash: NOR-8MB AND NAND-128MB
- Memory: 1Gb DDR
- IEEE 802.11: 802.11ax/ac/b/g/n
- 44 2.4G Wi-Fi standard 802.11b/g/n/ax
- 4*4 5.8G Wi-Fi Standard 802.11 a/n/ac/ax
- 2x 1 Gbps Ethernet (QCA8081) with 802.3at PoE input support
- 1x DC Port 12V 3A
- 4x Antenna IPEX Connector, 3dBi omni antennas
- Data Rate: 3657Mbps ( 2.4G: 1182Mbps (11ax 4x4); 5.8G: 2475Mbps (11ax 4x4))
- RF Power: 2.4g ≤ 20dBm; 5.8g ≤ 19dBm
- Max Power Consumption: ≤ 22W
**BACKUP YOUR STOCK FIRMWARE:**
- Put openwrt-*-initramfs-kernel.bin to your TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli and exec these commands:
```
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
```
- Once boot completed and you get the openwrt shell execute below commands:
```
device=<divice_name>
mkdir -p /tmp/fw_backup; cd /tmp/fw_backup
rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
dd if=/dev/${rootfs} of=rootfs_${rootfs} bs=1M
dd if=/dev/${rootfs_1} of=rootfs_1_${rootfs_1} bs=1M
cp /sys/firmware/fdt fdt.dtb
md5sum * > md5sum
tar -cvzf /tmp/${device}.tar.gz .
sum=$(md5sum /tmp/${device}.tar.gz | cut -d' ' -f1)
mv /tmp/${device}.tar.gz /tmp/${device}_${sum}.tar.gz
echo "stock fw backup saved to: /tmp/${device}_${sum}.tar.gz"
```
- Upload/save your backup to a safe place.
**STOCK FIRMWARE RECOVERY:**
- Boot initramfs image
- Upload your backed-up stock fw tarball to the device
using scp or download it from the device using wget.
- Enter device ssh cli or tty and exec:
```
cd /tmp && wget <your_web_server_ip>/${stock_fw_backup}.tar.gz`
tar -xpzf ${stock_fw_backup}.tar.gz
rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f /tmp/rootfs_${rootfs}
ubiformat /dev/${rootfs_1} -y -f /tmp/rootfs_1_${rootfs_1}
reboot
```
**INSTALLATION:**
1. initramfs method
- Put openwrt-*-initramfs-kernel.bin to your TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli and exec these commands:
```
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
```
- Once boot completed and you get the openwrt shell execute below commands:
```
cd /tmp && wget <your_web_server_ip>/factory.ubi`
export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1)
export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f factory.ubi
ubiformat /dev/${rootfs_1} -y -f factory.ubi
reboot
```
2. u-boot nand-factory.bin image method
- Put openwrt-*-squashfs-nand-factory.bin to your TFTP server and enter u-boot cli and exec these commands:
```
tftpboot <your_tftp_server_ip>:factory.bin
#After downloading is finished:
imxtract 0x44000000 ubi
flash rootfs
flash rootfs_1
reset
```
Signed-off-by: Shubham Vishwakarma <shubhamvis98@fossfrog.in >
2025-10-24 07:56:52 +02:00
Jesse Wu
919fe12372
ipq807x: add EMPLUS WAP380C support
...
Fixes: WIFI-14791
Signed-off-by: Jesse Wu <Jesse.Wu@emplustech.com >
2025-07-08 08:13:39 +02:00
jackcybertan
fc700364d1
ipq807x: add sonicfi rap650c
...
Fixes: WIFI-14494
Signed-off-by: jackcybertan <jack.tsai@cybertan.com.tw >
2025-04-25 08:14:14 +02:00
Tanya Singh
7eae0397f1
WIFI-14500: Fixes for Edgecore OAP103 1. Support bluetooth 2. Allow certificate loading on dual boot 3. Support RRM with Channel Utilization 4. Remove EAP102 from supported devices
...
Signed-off-by: Tanya Singh <tanya_singh@accton.com >
2025-03-26 14:56:31 +01:00
Venkat Chimata
1868e369d3
WIFI-14489: Adding Edgecore OAP103 to the list of supported APs
...
1. Integrated WiFi boarddata
2. Integrated LEDs
3. sysupgrade changes are integrated
4. Network ports are enumerated
5. A new profile is added under profiles
Signed-off-by: Venkat Chimata <venkata@shasta.cloud >
2025-03-24 11:56:34 +01:00
Ken
71315b140a
ipq807x: WF188n/WF196 dual image support
...
Fixes: WIFI-14339
Signed-off-by: Ken <xshi@actiontec.com >
2025-01-06 10:59:16 +01:00
Tanya Singh
0412bf03eb
treewide: Fix dual boot fw upgrade for Edgecore APs
...
Fixes: WIFI-13497
Signed-off-by: Tanya Singh <tanya_singh@accton.com >
2024-03-21 08:25:42 +01:00
Tanya Singh
e185a49c5b
ipq807x: Support OAP102
...
Fixes: WIFI-12794
Signed-off-by: Tanya Singh <tanya_singh@accton.com >
2023-10-02 12:55:33 +02:00
John Crispin
3b6582117b
ipq807x: add ath12 / v5.4 support
...
Signed-off-by: John Crispin <john@phrozen.org >
2023-04-10 14:25:48 +02:00
