2ee157f fix health.uc: the events patch left a stray sprintf( breaking compile
ac9e8cf capabilities: add developer mode info to restrictions
Signed-off-by: John Crispin <john@phrozen.org>
This exports USB related pins in sysfs using 'gpio-export' as:
- usb-rear-power
- usb-side-power
- usb-hub-enable (renamed from 'usb-enable')
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This adds few more pin configs for USB (rear and side ports power) and
MCU (reserved pin, apparently used by device vendor for DTM enable).
While at it, align labels and nodes names with staging branch.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This change focuses on the I/O related cleanups for the CIG WF-196 DTS
file. Most of the removed definitions come from QCA reference files and
should have been adjusted for a custom board. List of changes:
1. Drop 'btcoex' pinctrl mux define
WF-196 includes nRF52833 MCU which doesn't have dedicated PTA coex
hardware interface (see [1] for software based solution in Nordic's
nRF Connect SDK). Based on the real hardware research, defined pins
from 'btcoex' mux aren't routed to nRF52833 MCU.
2. Drop 'spi_3' pinctrl mux define
Defined label isn't used as reference in any other node and defined
GPIOs most likely aren't used as well.
3. Drop GPIO 46 and 47 from hsuart pinctrl mux define
It turned out that only UART TX and RX lines are routed between the
main SOC (IPQ8072A) and the MCU (nRF52833).
While at it, fix also some broken indentation and redundant new lines.
[1] https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrfxlib/mpsl/doc/bluetooth_coex.html
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8c71638 fix listing mesh interfaces inside state
c3f6981 sysupgrade: GW sends FWsignature and not signature
94543ee state: cleanup and document the data model
6056d32 state: add [ avg, max ] cpu thermal sensor
900ce67 add phy temperature to state messages
Signed-off-by: John Crispin <john@phrozen.org>
ProblemStatement: On EAP104, "fw_setenv" fails with the error "MTD erase error on /dev/mtd10: Invalid argument"
RootCause: uboot-envtools expects hex format for the number of sectors while the config file (/etc/fw_env.config) contains a decimal number format for the number of sectors. This leads to out-of-boundary size calculation within the function "environment_end()".
Solution: Update the scripts to write a hex value instead of a decimal value in the config file.
Reference for the expected format from the config file: Please check the function "get_config" in the file "fw_env.c", where the function uses sscanf to read the parameters from the config file.
Fixes: WIFI-12189
Signed-off-by: Ravi Vaishnav <ravi.vaishnav@netexperience.com>
config_get is issued with a default (120) parameter, which makes a check for 0
a redundant.
It can be safely removed, as the check for "[ "$interval" -eq 0 ]" is
always non-zero.
Fixes 396e2bd06c ("ucentral-client: cleanup health parameter")
Tested on virtual Wlan-AP img: no syntax error occured.
Signed-off-by: Oleksandr Mazur <cahbua@gmail.com>
