WIFI-14560: Update file names from /tmp dir in rrmd init script that need to be removed when rrmd (re)starts

Signed-off-by: Tanya Singh <tanya_singh@accton.com>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -53,7 +53,6 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
-	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -411,7 +410,6 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -21,7 +21,6 @@ edgecore,oap103)
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
-sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -24,7 +24,6 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
-	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -51,16 +50,6 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
-	sonicfi,rap650c)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ip link set eth0 address $wan_mac
-		ip link set eth1 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,20 +16,6 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_sonicfi() {
-	mac=$(fw_printenv -n BaseMacAddress)
-	[ -z "$mac" ] && return;
-
-	touch /lib/firmware/ath11k-macs
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	mac3=$(macaddr_add $eth 4)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -77,7 +63,6 @@ case "$FIRMWARE" in
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
-	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -112,9 +97,6 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi*)
-		ath11k_generate_macs_sonicfi
-		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,8 +10,7 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103"|\
-    "sonicfi,rap650c")
+    "edgecore,oap103")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,7 +29,6 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
-	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -84,17 +83,5 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	sonicfi,rap650c)
-		boot_part=$(fw_printenv -n bootfrom)
-		[ ${#boot_part} -eq 0 ] && boot_part=0
-		echo "Current bootfrom is $boot_part"
-		if [[ $boot_part == 1 ]]; then
-			CI_UBIPART="rootfs"
-			CI_FWSETENV="bootfrom 0"
-		elif [[ $boot_part == 0 ]]; then
-			CI_UBIPART="rootfs_1"
-			CI_FWSETENV="bootfrom 1"
-		fi
-		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -1,650 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "SonicFi RAP650C";
-	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
-	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio57";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			usb_mux_sel_pins: usb_mux_pins {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			pcie0_pins: pcie_pins {
-				pcie0_rst {
-					pins = "gpio58";
-					function = "pcie0_rst";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				pcie0_wake {
-					pins = "gpio59";
-					function = "pcie0_wake";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio25";
-					function = "gpio";
-					bias-pull-up;
-				};
-				mux_3 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			led_pins: led_pins {
-				red {
-					pins = "gpio0";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				green {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				blue {
-					pins = "gpio9";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			spi_3_pins: spi_3_pins {
-				mux {
-					pins = "gpio50", "gpio52", "gpio53";
-					function = "blsp3_spi";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				spi_cs {
-					pins = "gpio22";
-					function = "blsp3_spi2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				quartz_interrupt {
-					pins = "gpio47";
-					function = "gpio";
-					input;
-					bias-disable;
-				};
-				quartz_reset {
-					pins = "gpio21";
-					function = "gpio";
-					output-low;
-					bias-disable;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <5>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <24>;
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001a00 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		spi@78b8000 {
-			status = "ok";
-			pinctrl-0 = <&spi_3_pins>;
-			pinctrl-names = "default";
-			cs-select = <2>;
-			quartz-reset-gpio = <&tlmm 21 1>;
-
-			spidev3: spi@3 {
-				  compatible = "qti,spidev";
-				  reg = <0>;
-				  spi-max-frequency = <24000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		qusb@79000 {
-			status = "ok";
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		usb3@8A00000 {
-			status = "ok";
-		};
-
-		qusb@59000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		usb3@8C00000 {
-			status = "ok";
-		};
-
-		phy@84000 {
-			status = "ok";
-		};
-
-		phy@86000 {
-			status = "ok";
-		};
-
-		pci@20000000 {
-			perst-gpio = <&tlmm 58 1>;
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-
-			red {
-				label = "sys:red";
-				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			green {
-				label = "sys:green";
-				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led_power: blue {
-				label = "sys:blue";
-				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <24>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <24>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x90>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,17 +57,6 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
-define Device/sonicfi_rap650c
-  DEVICE_TITLE := SonicFi RAP650C
-  DEVICE_DTS := qcom-ipq807x-rap650c
-  DEVICE_DTS_CONFIG=config@hk09
-  SUPPORTED_DEVICES := sonicfi,rap650c
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap650c
-
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -63,17 +63,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF189W
 endef
 
-define Package/ath12k-wifi-sercomm-ap72tip
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for AP72TIP
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip-v4
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for AP72TIP-v4
-endef
-
-
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -121,25 +110,9 @@ define Package/ath12k-wifi-cig-wf189h/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
-define Package/ath12k-wifi-sercomm-ap72tip/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.ap72tip.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.ap72tip.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip-v4/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-v4-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-v4-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -9,9 +9,3 @@ $encoder -c board-2-eap105-QCN92XX.json -o board-2.bin.eap105.QCN92XX
 
 $encoder -c board-2-rap7110c_341x-IPQ5332.json -o board-2.bin.rap7110c_341x.IPQ5332
 $encoder -c board-2-rap7110c_341x-QCN92XX.json -o board-2.bin.rap7110c_341x.QCN92XX
-
-$encoder -c board-2-ap72tip-IPQ5332.json -o board-2.bin.ap72tip.IPQ5332
-$encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
-
-$encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
-$encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -126,15 +126,12 @@ hostapd_common_add_device_config() {
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
-	config_add_boolean maxassoc_ignore_probe
 
 	config_add_string acs_chan_bias
-	config_add_boolean acs_exclude_dfs
 	config_add_array hostapd_options
 
 	config_add_int airtime_mode
 	config_add_int mbssid
-	config_add_boolean rnr_beacon ema
 
 	hostapd_add_log_config
 }
@@ -145,11 +142,10 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
 		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
-		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
-		maxassoc_ignore_probe band
+		mbssid:0 band reg_power_type stationary_ap
 
 	hostapd_set_log_options base_cfg
 
@@ -159,9 +155,6 @@ hostapd_prepare_device_config() {
 	set_default legacy_rates 0
 	set_default airtime_mode 0
 	set_default cell_density 0
-	set_default rnr_beacon 0
-	set_default ema 0
-	set_default acs_exclude_dfs 0
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
@@ -251,14 +244,8 @@ hostapd_prepare_device_config() {
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 	append base_cfg "beacon_int=$beacon_int" "$N"
 	[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
-	append base_cfg "dtim_period=$dtim_period" "$N"
 	[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
 	[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
-	[ "$maxassoc_ignore_probe" -gt 0 ] && append base_cfg "no_probe_resp_if_max_sta=1" "$N"
-	[ "$rnr_beacon" -gt 0 ] && append base_cfg "rnr_beacon=$rnr_beacon" "$N"
-	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
-	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"
-
 	[ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N"
 
 	[ "$band" = "6g" ] && {
@@ -300,24 +287,15 @@ hostapd_common_add_bss_config() {
 	config_add_int ieee80211w
 	config_add_int eapol_version
 
-	config_add_string 'auth_server:host' 'server:host'
+	config_add_array auth_server acct_server
+	config_add_string 'server:host'
 	config_add_string auth_secret key
 	config_add_int 'auth_port:port' 'port:port'
 
-	config_add_string acct_server
 	config_add_string acct_secret
 	config_add_int acct_port
-
-	config_add_string acct_server_secondary
-	config_add_string acct_secret_secondary
-	config_add_int acct_port_secondary
-
 	config_add_int acct_interval
 
-	config_add_string auth_server_secondary
-	config_add_string auth_secret_secondary
-	config_add_int auth_port_secondary
-
 	config_add_int bss_load_update_period chan_util_avg_period
 
 	config_add_string dae_client
@@ -361,8 +339,8 @@ hostapd_common_add_bss_config() {
 	config_add_string lci civic
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
-	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
-	config_add_string mobility_domain r1_key_holder ft_key
+	config_add_int r0_key_lifetime reassociation_deadline
+	config_add_string mobility_domain r1_key_holder
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -413,18 +391,14 @@ hostapd_common_add_bss_config() {
 	config_add_array radius_auth_req_attr
 	config_add_array radius_acct_req_attr
 
-	config_add_int eap_server
-	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
+	config_add_int eap_server radius_server_auth_port
+	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients
 
 	config_add_boolean fils
 	config_add_string fils_dhcp
 
-	config_add_boolean ratelimit
 	config_add_int ocv
 
-	config_add_string uci_section
-	config_add_boolean dynamic_probe_resp
-
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
 }
@@ -459,7 +433,6 @@ hostapd_set_psk() {
 	local ifname="$1"
 
 	rm -f /var/run/hostapd-${ifname}.psk
-	touch /var/run/hostapd-${ifname}.psk
 	for_each_station hostapd_set_psk_file ${ifname}
 }
 
@@ -576,83 +549,18 @@ append_airtime_sta_weight() {
 	[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
 }
 
-append_radius_server() {
+append_auth_server() {
+	[ -n "$1" ] || return
+	append bss_conf "auth_server_addr=$1" "$N"
+	append bss_conf "auth_server_port=$auth_port" "$N"
+	[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+}
 
-	json_get_vars \
-		auth_server auth_secret auth_port \
-		auth_server_secondary auth_secret_secondary auth_port_secondary \
-		dae_client dae_secret dae_port \
-		dynamic_ownip ownip radius_client_addr \
-		eap_reauth_period request_cui \
-		erp_domain mobility_domain \
-		fils_realm fils_dhcp
-
-	set_default dynamic_ownip 1
-
-	# legacy compatibility
-	[ -n "$auth_server" ] || json_get_var auth_server server
-	[ -n "$auth_port" ] || json_get_var auth_port port
-	[ -n "$auth_secret" ] || json_get_var auth_secret key
-
-	[ "$fils" -gt 0 ] && {
-		set_default erp_domain "$mobility_domain"
-		set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
-		set_default fils_realm "$erp_domain"
-
-		append bss_conf "erp_send_reauth_start=1" "$N"
-		append bss_conf "erp_domain=$erp_domain" "$N"
-		append bss_conf "fils_realm=$fils_realm" "$N"
-		append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
-
-		[ "$fils_dhcp" = "*" ] && {
-			json_get_values network network
-			fils_dhcp=
-			for net in $network; do
-				fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
-				[ -n "$fils_dhcp" ] && break
-			done
-
-			[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
-				fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
-		}
-		[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
-	}
-
-	set_default auth_port 1812
-	set_default auth_port_secondary 1812
-	set_default dae_port 3799
-	set_default request_cui 0
-
-	[ "$eap_server" -eq 0  -a -n "$auth_server" ] && {
-		append bss_conf "auth_server_addr=$auth_server" "$N"
-		append bss_conf "auth_server_port=$auth_port" "$N"
-		append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-	}
-
-	[ -n "$auth_server_secondary" ] && {
-		append bss_conf "auth_server_addr=$auth_server_secondary" "$N"
-		append bss_conf "auth_server_port=$auth_port_secondary" "$N"
-		[ -n "$auth_secret_secondary" ] && \
-			append bss_conf "auth_server_shared_secret=$auth_secret_secondary" "$N"
-	}
-
-	[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
-	[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
-
-	[ -n "$dae_client" -a -n "$dae_secret" ] && {
-		append bss_conf "radius_das_port=$dae_port" "$N"
-		append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
-	}
-	json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
-
-	if [ -n "$ownip" ]; then
-		append bss_conf "own_ip_addr=$ownip" "$N"
-	elif [ "$dynamic_ownip" -gt 0 ]; then
-		append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
-	fi
-
-	[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
-	[ "$macfilter" = radius ] && append bss_conf "macaddr_acl=2" "$N"
+append_acct_server() {
+	[ -n "$1" ] || return
+	append bss_conf "acct_server_addr=$1" "$N"
+	append bss_conf "acct_server_port=$acct_port" "$N"
+	[ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 }
 
 hostapd_set_bss_options() {
@@ -662,7 +570,7 @@ hostapd_set_bss_options() {
 
 	wireless_vif_parse_encryption
 
-	local bss_conf bss_md5sum
+	local bss_conf bss_md5sum ft_key
 	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 
 	json_get_vars \
@@ -673,14 +581,13 @@ hostapd_set_bss_options() {
 		wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
 		macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
 		iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
-		acct_server acct_secret acct_port acct_interval \
-		acct_server_secondary acct_secret_secondary acct_port_secondary \
+		acct_secret acct_port acct_interval \
 		bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
+		vendor_elements fils ocv apup multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -697,7 +604,6 @@ hostapd_set_bss_options() {
 	set_default tdls_prohibit 0
 	set_default eapol_version $((wpa & 1))
 	set_default acct_port 1813
-	set_default acct_port_secondary 1813
 	set_default bss_load_update_period 60
 	set_default chan_util_avg_period 600
 	set_default utf8_ssid 1
@@ -706,7 +612,6 @@ hostapd_set_bss_options() {
 	set_default airtime_bss_weight 0
 	set_default airtime_bss_limit 0
 	set_default eap_server 0
-	set_default dynamic_probe_resp 0
 	set_default apup 0
 
 	/usr/sbin/hostapd -vfils || fils=0
@@ -733,7 +638,6 @@ hostapd_set_bss_options() {
 	append bss_conf "preamble=$short_preamble" "$N"
 	append bss_conf "wmm_enabled=$wmm" "$N"
 	append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
-	append bss_conf "dynamic_probe_resp=$dynamic_probe_resp" "$N"
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
@@ -750,22 +654,10 @@ hostapd_set_bss_options() {
 
 	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 
-	[ -n "$acct_server" ] && {
-		append bss_conf "acct_server_addr=$acct_server" "$N"
-		append bss_conf "acct_server_port=$acct_port" "$N"
-		[ -n "$acct_secret" ] && \
-			append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
-		[ -n "$acct_interval" ] && \
-			append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
-		json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
-	}
-
-	[ -n "$acct_server_secondary" ] && {
-		append bss_conf "acct_server_addr=$acct_server_secondary" "$N"
-		append bss_conf "acct_server_port=$acct_port_secondary" "$N"
-		[ -n "$acct_secret_secondary" ] && \
-			append bss_conf "acct_server_shared_secret=$acct_secret_secondary" "$N"
-	}
+	[ -n "$acct_interval" ] && \
+		append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+	json_for_each_item append_acct_server acct_server
+	json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
 
 	[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
 
@@ -798,8 +690,6 @@ hostapd_set_bss_options() {
 			# Here we make the assumption that if we're in open mode
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
-			vlan_possible=1
-			append_radius_server
 		;;
 		psk|sae|psk-sae)
 			json_get_vars key wpa_psk_file
@@ -824,15 +714,74 @@ hostapd_set_bss_options() {
 			}
 			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
-			append_radius_server
 			set_default dynamic_vlan 0
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap192|eap-eap2|eap2)
-			append_radius_server
+		eap|eap2|eap-eap2|eap192)
+			json_get_vars \
+				auth_server auth_secret auth_port \
+				dae_client dae_secret dae_port \
+				dynamic_ownip ownip radius_client_addr \
+				eap_reauth_period request_cui \
+				erp_domain mobility_domain \
+				fils_realm fils_dhcp
+
 			# radius can provide VLAN ID for clients
 			vlan_possible=1
+
+			set_default dynamic_ownip 1
+
+			# legacy compatibility
+			[ -n "$auth_server" ] || json_get_var auth_server server
+			[ -n "$auth_port" ] || json_get_var auth_port port
+			[ -n "$auth_secret" ] || json_get_var auth_secret key
+
+			[ "$fils" -gt 0 ] && {
+				set_default erp_domain "$mobility_domain"
+				set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
+				set_default fils_realm "$erp_domain"
+
+				append bss_conf "erp_send_reauth_start=1" "$N"
+				append bss_conf "erp_domain=$erp_domain" "$N"
+				append bss_conf "fils_realm=$fils_realm" "$N"
+				append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
+
+				[ "$fils_dhcp" = "*" ] && {
+					json_get_values network network
+					fils_dhcp=
+					for net in $network; do
+						fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
+						[ -n "$fils_dhcp" ] && break
+					done
+
+					[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
+						fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
+				}
+				[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
+			}
+
+			set_default auth_port 1812
+			set_default dae_port 3799
+			set_default request_cui 0
+
+			[ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server
+			[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
+			[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
+
+			[ -n "$dae_client" -a -n "$dae_secret" ] && {
+				append bss_conf "radius_das_port=$dae_port" "$N"
+				append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
+			}
+			json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
+
+			if [ -n "$ownip" ]; then
+				append bss_conf "own_ip_addr=$ownip" "$N"
+			elif [ "$dynamic_ownip" -gt 0 ]; then
+				append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+			fi
+
+			[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 			append bss_conf "eapol_key_index_workaround=1" "$N"
 			append bss_conf "ieee8021x=1" "$N"
 
@@ -849,7 +798,6 @@ hostapd_set_bss_options() {
 			append bss_conf "wpa_psk_radius=3" "$N"
 			append_radius_server
 			vlan_possible=1
-		;;
 	esac
 
 	case "$auth_type" in
@@ -973,74 +921,9 @@ hostapd_set_bss_options() {
 		}
 	fi
 
+	json_get_vars ieee80211r
+	set_default ieee80211r 0
 	if [ "$wpa" -ge "1" ]; then
-		json_get_vars ieee80211r
-		set_default ieee80211r 0
-
-		if [ "$ieee80211r" -gt "0" ]; then
-			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline ft_l2_refresh
-
-			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
-			set_default ft_over_ds 1
-			set_default ft_l2_refresh 30
-			set_default reassociation_deadline 1000
-			skip_kh_setup=0
-
-			case "$auth_type" in
-				psk|psk-sae)
-					set_default ft_psk_generate_local 1
-					skip_kh_setup="$ft_psk_generate_local"
-				;;
-				*)
-					set_default ft_psk_generate_local 0
-				;;
-			esac
-
-			case "$auth_type" in
-				*sae*) skip_kh_setup=0;;
-			esac
-
-			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
-			append bss_conf "mobility_domain=$mobility_domain" "$N"
-			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
-			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
-			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
-			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
-
-			if [ "$skip_kh_setup" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
-				json_get_values r0kh r0kh
-				json_get_values r1kh r1kh
-
-				set_default r0_key_lifetime 10000
-				set_default pmk_r1_push 0
-
-				[ -n "$r0kh" -a -n "$r1kh" ] || {
-					if [ -z "$auth_secret" -a -z "$key" ]; then
-						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
-						return 1
-					fi
-					[ -z "$ft_key" ] && {
-						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
-
-						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
-						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
-					}
-				}
-
-				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
-				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
-				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
-				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
-
-				for kh in $r0kh; do
-					append bss_conf "r0kh=${kh//,/ }" "$N"
-				done
-				for kh in $r1kh; do
-					append bss_conf "r1kh=${kh//,/ }" "$N"
-				done
-			fi
-		fi
 		if [ "$fils" -gt 0 ]; then
 			json_get_vars fils_realm
 			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
@@ -1053,6 +936,60 @@ hostapd_set_bss_options() {
 	fi
 
 	if [ "$wpa" -ge "2" ]; then
+		if [ "$ieee80211r" -gt "0" ]; then
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+
+			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
+			set_default ft_over_ds 0
+			set_default reassociation_deadline 1000
+
+			case "$auth_type" in
+				psk)
+					set_default ft_psk_generate_local 1
+				;;
+				*)
+					set_default ft_psk_generate_local 0
+				;;
+			esac
+
+			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
+			append bss_conf "mobility_domain=$mobility_domain" "$N"
+			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
+			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
+			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+
+			if [ "$ft_psk_generate_local" -eq "0" ]; then
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+				json_get_values r0kh r0kh
+				json_get_values r1kh r1kh
+
+				set_default r0_key_lifetime 10000
+				set_default pmk_r1_push 0
+
+				[ -n "$r0kh" -a -n "$r1kh" ] || {
+					if [ -z "$auth_secret" -a -z "$key" ]; then
+						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
+						return 1
+					fi
+					ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
+
+					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
+					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
+				}
+
+				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
+				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
+				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
+
+				for kh in $r0kh; do
+					append bss_conf "r0kh=${kh//,/ }" "$N"
+				done
+				for kh in $r1kh; do
+					append bss_conf "r1kh=${kh//,/ }" "$N"
+				done
+			fi
+		fi
+
 		if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 			set_default auth_cache 1
 			append bss_conf "rsn_preauth=1" "$N"
@@ -1252,8 +1189,6 @@ hostapd_set_bss_options() {
 		append bss_conf "per_sta_vif=$per_sta_vif" "$N"
 	fi
 
-	[ -n "$uci_section" ] && append bss_conf "uci_section=$uci_section" "$N"
-
 	if [ "$apup" -gt 0 ]; then
 		append bss_conf "apup=$apup" "$N"
 

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,9 +7,7 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-sercomm,ap72tip-v4|\
 sercomm,ap72tip)
-	ucidef_set_led_default "power" "POWER" "blue:status" "on"
 	ucidef_set_led_netdev "wan_link" "wan_link" "green:phy" "eth0" "link"
 	ucidef_set_led_netdev "wan_act" "wan_act" "yellow:phy" "eth0" "rx tx"
 	;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -29,9 +29,6 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
 		;;
-	sercomm,ap72tip-v4)
-		ucidef_set_interface_wan "eth0"
-		;;	
 	esac
 }
 
@@ -55,13 +52,6 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
                 ;;
-        sercomm,ap72tip)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                lan_mac=$(cat /sys/class/net/eth1/address)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
-                ;;
         edgecore,eap105)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -78,12 +68,6 @@ qcom_setup_macs()
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
                 ;;
-        sercomm,ap72tip-v4)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
-                ;;
         *)
                 wan_mac=$(cat /sys/class/net/eth1/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -31,7 +31,6 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
@@ -47,7 +46,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -120,9 +120,5 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	sercomm,ap72tip-v4|\
-	sercomm,ap72tip)
-		nand_upgrade_tar "$1"
-		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -47,7 +47,6 @@
 
 			phy0: ethernet-phy@0 {
 				reg = <8>;
-				compatible ="ethernet-phy-ieee802.3-c45";
 			};
 
 			phy1: ethernet-phy@1 {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip-v4.dts

@@ -1,591 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Sercomm WiFi-7";
-	compatible = "sercomm,ap72tip-v4", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		serial1 = &blsp1_uart1; /*ble*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-	
-#if 0   //AQR114C
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-
-			phy1: ethernet-phy@1 {   //aqr114c
-				reg = <0>;
-				compatible ="ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 { //aqr114c
-						port_id = <2>;
-						phy_address = <0>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-		
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};	
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,phy-mdio-addr = <0>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-#else //SFP	
-		mdio:mdio@90000 { 
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio0 for napa*/
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			status = "okay";
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <30>;
-						media-type = "sfp"; 
-					};
-				};
-			};
-		};
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <30>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-#endif
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-                compatible = "gpio-leds";
-
-				led@25 {
-					label = "blue:status";
-					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
-                    default-state = "off";
-                };
-				led@61 {
-					label = "green:phy";
-					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
-				};
-				led@62 {
-					label = "yellow:phy";
-					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
-				};
-		};
-		
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_i2c2 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&blsp1_spi0 {   //nor flash
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11"; 
-		//, "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_spi1 {   /*tpm*/
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "okay";
-	
-	tpm: spi-tpm@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,st33htpm-spi";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		status = "okay";
-	};
-};
-
-&pcm {
-	pinctrl-0 = <&audio_pins_pri>;
-	pinctrl-names = "primary";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x100f>;  //0x1019->0x100f
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	audio_pins_pri: audio_pinmux_pri {
-		mux_1 {
-			pins = "gpio29";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio30";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio31";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio32";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_0_pins: i2c-0-state {
-		pins = "gpio43", "gpio45";
-		function = "blsp2_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_1_pins: spi-1-pins {  /* tpm */
-		pins = "gpio29", "gpio30", "gpio31", "gpio32";
-		function = "blsp1_spi0";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-/*	gpio_leds_default: gpio-leds-default-state {
-		pins = "gpio36";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-down;
-	};*/
-	
-	button_pins: button-state {
-		pins = "gpio1";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio47";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};
-
-//sercomm add
-&wifi3 {
-	/* QCN9224 5G+6G */
-	hremote_node = <&qcn9224_pcie1>;
-	qcom,board_id = <0x100f>; 
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip.dts

@@ -1,601 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Sercomm WiFi-7";
-	compatible = "sercomm,ap72tip", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		serial1 = &blsp1_uart1; /*ble*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-	
-#if 1   //AQR114C
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-
-			phy1: ethernet-phy@1 {   //aqr114c
-				reg = <0>;
-				compatible ="ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 { //aqr114c
-						port_id = <2>;
-						phy_address = <0>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-		
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};	
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,phy-mdio-addr = <0>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-#else //SFP	
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <30>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-		mdio:mdio@90000 { 
-			status = "okay";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio0 for napa*/
-			phy-reset-gpio = <&tlmm 0 0>;
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <30>;
-						media-type = "sfp"; 
-					};
-				};
-			};
-		};
-
-#endif
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-                compatible = "gpio-leds";
-
-				led@25 {
-					label = "blue:status";
-					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
-                    default-state = "off";
-                };
-				led@24 {
-					label = "red:status";
-					gpios = <&tca6416 10 GPIO_ACTIVE_HIGH>;
-				};
-				led_power: led@16 {
-                                label = "green:status";
-					gpios = <&tca6416 11 GPIO_ACTIVE_HIGH>;
-				};
-				led@61 {
-					label = "green:phy";
-					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
-				};
-				led@62 {
-					label = "yellow:phy";
-					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
-				};
-		};
-/*
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};*/
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_i2c2 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&blsp1_spi0 {   //nor flash
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11"; 
-		//, "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_spi1 {   /*tpm*/
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "okay";
-	
-	tpm: spi-tpm@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,st33htpm-spi";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		status = "okay";
-	};
-};
-
-&pcm {
-	pinctrl-0 = <&audio_pins_pri>;
-	pinctrl-names = "primary";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x100f>;  //0x1019->0x100f
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	audio_pins_pri: audio_pinmux_pri {
-		mux_1 {
-			pins = "gpio29";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio30";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio31";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio32";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_0_pins: i2c-0-state {
-		pins = "gpio43", "gpio45";
-		function = "blsp2_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_1_pins: spi-1-pins {  /* tpm */
-		pins = "gpio29", "gpio30", "gpio31", "gpio32";
-		function = "blsp1_spi0";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-/*	gpio_leds_default: gpio-leds-default-state {
-		pins = "gpio36";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-down;
-	};*/
-/*
-	button_pins: button-state {
-		pins = "gpio25";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};*/
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio47";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};
-
-//sercomm add
-&wifi3 {
-	/* QCN9224 5G+6G */
-	hremote_node = <&qcn9224_pcie1>;
-	qcom,board_id = <0x100f>; 
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332.dtsi

@@ -736,36 +736,6 @@
 			status = "disabled";
 		};
 
-		blsp1_spi1: spi@78b6000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x078b6000 0x600>;
-			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
-			spi-max-frequency = <50000000>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-		
-		blsp1_i2c2: i2c@78b7000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x78b7000 0x600>;
-			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			clock-frequency  = <400000>;
-			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
 		blsp1_i2c1: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x600>;

feeds/qca-wifi-7/ipq53xx/files-6.1/drivers/net/phy/rtk/rtk_phy.c

@@ -48,9 +48,6 @@ static int rtl826xb_get_features(struct phy_device *phydev)
     linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
                        phydev->supported);
 
-    linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-                       phydev->supported);
-
     return 0;
 }
 
@@ -83,6 +80,7 @@ static int rtkphy_config_init(struct phy_device *phydev)
         case REALTEK_PHY_ID_RTL8261N:
         case REALTEK_PHY_ID_RTL8264B:
             phydev_info(phydev, "%s:%u [RTL8261N/RTL826XB] phy_id: 0x%X PHYAD:%d\n", __FUNCTION__, __LINE__, phydev->drv->phy_id, phydev->mdio.addr);
+	    phy_modify_mmd_changed(phydev, 7, 0x20, BIT(12), 0);
 
           #if 1 /* toggle reset */
             phy_modify_mmd_changed(phydev, 30, 0x145, BIT(0)  , 1);
@@ -215,6 +213,7 @@ static int rtkphy_c45_aneg_done(struct phy_device *phydev)
 static int rtkphy_c45_read_status(struct phy_device *phydev)
 {
     int ret = 0, status = 0;
+    uint16_t local;
     phydev->speed = SPEED_UNKNOWN;
     phydev->duplex = DUPLEX_UNKNOWN;
     phydev->pause = 0;
@@ -233,6 +232,9 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
         if (ret)
             return ret;
 	
+	phy_write_mmd(phydev, 7, 0x20, 0x181);
+	local = phy_read_mmd(phydev, 7, 0x20);
+
         status =  phy_read_mmd(phydev, 31, 0xA414);
         if (status < 0)
             return status;
@@ -240,6 +242,11 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
             phydev->lp_advertising, status & BIT(11));
 
         phy_resolve_aneg_linkmode(phydev);
+	if((phydev->speed == 10000) && (local == 0x181))
+        {
+                phydev->speed = 5000;
+                phydev->duplex = DUPLEX_FULL;
+        }
     }
     else
     {

feeds/qca-wifi-7/ipq53xx/generic/config-6.1-platform

@@ -2288,7 +2288,7 @@ CONFIG_GPIOLIB_FASTPATH_LIMIT=512
 # CONFIG_GPIO_ML_IOH is not set
 # CONFIG_GPIO_MOCKUP is not set
 # CONFIG_GPIO_MPC8XXX is not set
-CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCA9570 is not set
 # CONFIG_GPIO_PCF857X is not set

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -14,30 +14,16 @@ endef
 TARGET_DEVICES += cig_wf189
 
 define Device/sercomm_ap72tip
-  DEVICE_TITLE := Sercomm AP72TIP
+  DEVICE_TITLE := Sercomm AP72 TIP
   DEVICE_DTS := ipq5332-sercomm-ap72tip
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
+  DEVICE_DTS_CONFIG := config@mi01.2-qcn9160-c1
   IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
   DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
 endef
-TARGET_DEVICES += sercomm_ap72tip
-
-define Device/sercomm_ap72tip-v4
-  DEVICE_TITLE := Sercomm AP72TIP-v4
-  DEVICE_DTS := ipq5332-sercomm-ap72tip-v4
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip-v4 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
-endef
-TARGET_DEVICES += sercomm_ap72tip-v4
+#TARGET_DEVICES += sercomm_ap72tip
 
 define Device/edgecore_eap105
   DEVICE_TITLE := Edgecore EAP105

feeds/qca-wifi-7/qca-ssdk-qca/patches/0006-qca-ssdk-Fix-10G-rtl-phy-driver-for-c45-mdio-read-wr.patch

@@ -1,262 +0,0 @@
-From 9181fe30babf33002126dd4367fb314077827609 Mon Sep 17 00:00:00 2001
-From: huangyunxiang <huangyunxiang@cigtech.com>
-Date: Mon, 28 Apr 2025 09:51:00 +0800
-Subject: [PATCH] qca-ssdk Fix 10G rtl phy driver for c45 mdio read/write and
- set fix ablity set
-
----
- include/hsl/hsl.h                         |  4 +-
- include/init/ssdk_plat.h                  |  7 ++
- src/hsl/phy/rtl826xb_phy.c                | 73 +++++++++++--------
- src/init/ssdk_init.c                      |  2 +
- src/init/ssdk_plat.c                      | 54 ++++++++++++++
- 5 files changed, 106 insertions(+), 34 deletions(-)
-
-diff --git a/include/hsl/hsl.h b/include/hsl/hsl.h
-index e6b49d6b55..6e82450991 100644
---- a/include/hsl/hsl.h
-+++ b/include/hsl/hsl.h
-@@ -193,7 +193,7 @@ do { \
-         rv = SW_NOT_INITIALIZED; \
-     } \
- } while (0);
--
-+#endif
- #define HSL_PHY_GET(rv, dev, phy_addr, reg, value) \
- do { \
-     hsl_api_t *p_api = hsl_api_ptr_get(dev); \
-@@ -213,7 +213,7 @@ do { \
-         rv = SW_NOT_INITIALIZED; \
-     } \
- } while (0);
--#endif
-+//#endif
- /*qca808x_start*/
- #if (defined(API_LOCK) \
- && (defined(HSL_STANDALONG) || (defined(KERNEL_MODULE) && defined(USER_MODE))))
-diff --git a/include/init/ssdk_plat.h b/include/init/ssdk_plat.h
-index 92596477af..9fe5bb824a 100644
---- a/include/init/ssdk_plat.h
-+++ b/include/init/ssdk_plat.h
-@@ -471,6 +471,13 @@ a_uint32_t qca_mii_read(a_uint32_t dev_id, a_uint32_t reg);
- void qca_mii_write(a_uint32_t dev_id, a_uint32_t reg, a_uint32_t val);
- int qca_mii_update(a_uint32_t dev_id, a_uint32_t reg, a_uint32_t mask, a_uint32_t val);
- 
-+sw_error_t
-+qca_ar8327_phy_read(a_uint32_t dev_id, a_uint32_t phy_addr,
-+			a_uint32_t reg, a_uint16_t* data);
-+sw_error_t
-+qca_ar8327_phy_write(a_uint32_t dev_id, a_uint32_t phy_addr,
-+			a_uint32_t reg, a_uint16_t data);
-+
- a_uint32_t __qca_mii_read(a_uint32_t dev_id, a_uint32_t reg);
- void __qca_mii_write(a_uint32_t dev_id, a_uint32_t reg, a_uint32_t val);
- int __qca_mii_update(a_uint32_t dev_id, a_uint32_t reg, a_uint32_t mask, a_uint32_t val);
-diff --git a/src/hsl/phy/rtl826xb_phy.c b/src/hsl/phy/rtl826xb_phy.c
-index a336348aa9..4eaa1ea4f1 100644
---- a/src/hsl/phy/rtl826xb_phy.c
-+++ b/src/hsl/phy/rtl826xb_phy.c
-@@ -48,46 +48,66 @@ void rtl826xb_phy_lock_init(void)
- 
- static a_uint16_t rtl826x_phy_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id)
- {
-+	a_uint16_t phy_data;
-+	sw_error_t rv;
- 	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
--
--	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
-+	HSL_PHY_GET(rv, dev_id, phy_id, reg_id_c45, &phy_data);
-+	return phy_data;
- }
- 
- 
- static sw_error_t rtl826x_phy_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id, a_uint16_t reg_val)
- {
-+	sw_error_t rv;
- 	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
--
--	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, reg_val);
-+	HSL_PHY_SET(rv, dev_id,  phy_id, reg_id_c45, reg_val);
-+	return rv;
- }
- 
- 
- static a_uint16_t rtl826x_phy_reg_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg)
- {
--	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg);
-+	a_uint16_t phy_data;
-+	sw_error_t rv;
-+	HSL_PHY_GET(rv, dev_id, phy_id, reg, &phy_data);
-+	return phy_data;
- }
- 
- 
- static sw_error_t rtl826x_phy_reg_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg, a_uint16_t reg_val)
- {
--	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
-+	sw_error_t rv;
-+	
-+	HSL_PHY_SET(rv, dev_id,  phy_id, reg, reg_val);
-+
-+	return rv;
- }
- 
- 
- static a_int16_t hal_miim_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg)
- {
-+	a_uint16_t phy_data;
-+	sw_error_t rv;
-+
- 	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
- 
--	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
-+	HSL_PHY_GET(rv, dev_id, phy_id, reg_id_c45, &phy_data);
-+
-+	return phy_data;
- }
- 
- 
- 
- static a_int32_t hal_miim_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg, a_uint16_t phy_data)
- {
-+	sw_error_t rv;
-+
- 	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
- 
--	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, phy_data);
-+	HSL_PHY_SET(rv, dev_id, phy_id, reg_id_c45, phy_data);
-+
-+
-+	return rv;
- }
- 
- 
-@@ -1281,34 +1301,23 @@ phy_826xb_autoNegoAbility_set(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t a
- 	hsl_phy_phydev_autoneg_update(dev_id, phy_id, A_TRUE, autoneg);
- 	
- 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 16);
-+	phyData &= (~(0x0020 | 0x0040 | FAL_PHY_ADV_100TX_HD | FAL_PHY_ADV_100TX_FD | FAL_PHY_ADV_PAUSE | FAL_PHY_ADV_ASY_PAUSE));
-+	phyData |= (autoneg & FAL_PHY_ADV_100TX_HD) ? (FAL_PHY_ADV_100TX_HD) : (0);
-+	phyData |= ((autoneg & FAL_PHY_ADV_100TX_FD)) ? (FAL_PHY_ADV_100TX_FD) : (0);
-+//	phyData |= (autoneg & FAL_PHY_ADV_PAUSE) ? (FAL_PHY_ADV_PAUSE) : (0);
-+//	phyData |= (autoneg & FAL_PHY_ADV_ASY_PAUSE) ? (FAL_PHY_ADV_ASY_PAUSE) : (0);
- 
--    phyData &= (~(0x0020 | 0x0040 | 0x0080 | 0x0100 | 0x0400 | 0x0800));
--	phyData |= ((autoneg & 1 << 1)) ? (0x0040) : (0);
--    phyData |= ((autoneg & 1 << 2)) ? (0x0080) : (0);
--    phyData |= ((autoneg & 1 << 3)) ? (0x0100) : (0);
--	phyData |= ((autoneg & 1 << 4)) ? (0x0400) : (0);
--	phyData |= ((autoneg & 1 << 5)) ? (0x0800) : (0);
--//    phyData |= ((autoneg & 1 << 9)) ? (0x0400) : (0);
--//    phyData |= ((autoneg & 1 << 10)) ? (0x0800) : (0);
--
--    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
--	
-+	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
- 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 32);
-+	phyData &= (~(FAL_PHY_ADV_2500T_FD | FAL_PHY_ADV_5000T_FD | FAL_PHY_ADV_10000T_FD));
-+	phyData |= (autoneg & FAL_PHY_ADV_2500T_FD) ? (FAL_PHY_ADV_2500T_FD) : (0);
-+	phyData |= (autoneg & FAL_PHY_ADV_5000T_FD) ? (FAL_PHY_ADV_5000T_FD) : (0);
-+//	phyData |= (autoneg & FAL_PHY_ADV_10000T_FD) ? (FAL_PHY_ADV_10000T_FD) : (0);
- 
--    phyData &= (~(0x4000 | 0x2000 | 0x1000));
--    phyData |= (autoneg & 1 << 12) ? (0x0080) : (0);
--    phyData |= (autoneg & 1 << 13) ? (0x0100) : (0);
--    phyData |= (autoneg & 1 << 14) ? (0x1000) : (0);
--
--    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
--     
--	
-+	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
- 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_VEND2, 0xA412);
--
--
--    phyData &= (~(0x0100 | 0x0200));
--    phyData |= (autoneg & 1 << 9) ? (0x0200) : (0);
--//    phyData |= (autoneg & 1 << 5) ? (0x0200) : (0);
-+	phyData &= (~(0x0100 | FAL_PHY_ADV_1000T_FD));
-+	phyData |= (autoneg & FAL_PHY_ADV_1000T_FD) ? (FAL_PHY_ADV_1000T_FD) : (0);
- 
-     phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_VEND2, 0xA412, phyData);
-         
-diff --git a/src/init/ssdk_init.c b/src/init/ssdk_init.c
-index 59f5fc43c0..fb6288db73 100644
---- a/src/init/ssdk_init.c
-+++ b/src/init/ssdk_init.c
-@@ -2210,6 +2210,8 @@ static void ssdk_cfg_default_init(ssdk_init_cfg *cfg)
- 	memset(cfg, 0, sizeof(ssdk_init_cfg));
- 	cfg->cpu_mode = HSL_CPU_1;
- 	cfg->nl_prot = 30;
-+	cfg->reg_func.mdio_set = qca_ar8327_phy_write;
-+	cfg->reg_func.mdio_get = qca_ar8327_phy_read;
- /*qca808x_end*/
- 
- 	cfg->reg_func.header_reg_set = qca_switch_reg_write;
-diff --git a/src/init/ssdk_plat.c b/src/init/ssdk_plat.c
-index 87bd0dbaf1..24285c8de7 100644
---- a/src/init/ssdk_plat.c
-+++ b/src/init/ssdk_plat.c
-@@ -458,6 +458,60 @@ int __qca_mii_update(a_uint32_t dev_id, a_uint32_t reg, a_uint32_t mask, a_uint3
- 	return 0;
- }
- 
-+a_bool_t
-+phy_addr_validation_check(a_uint32_t phy_addr)
-+{
-+
-+        if ((phy_addr > SSDK_PHY_BCAST_ID) || (phy_addr < SSDK_PHY_MIN_ID))
-+                return A_FALSE;
-+        else
-+                return A_TRUE;
-+}
-+
-+sw_error_t
-+qca_ar8327_phy_read(a_uint32_t dev_id, a_uint32_t phy_addr,
-+                           a_uint32_t reg, a_uint16_t* data)
-+{
-+        struct mii_bus *bus = NULL;
-+
-+        if (A_TRUE != phy_addr_validation_check (phy_addr))
-+        {
-+                return SW_BAD_PARAM;
-+        }
-+
-+        bus = ssdk_phy_miibus_get(dev_id, phy_addr);
-+        if (!bus)
-+                return SW_NOT_SUPPORTED;
-+
-+        mutex_lock(&bus->mdio_lock);
-+        *data = __mdiobus_read(bus, phy_addr, reg);
-+        mutex_unlock(&bus->mdio_lock);
-+
-+        return 0;
-+}
-+
-+sw_error_t
-+qca_ar8327_phy_write(a_uint32_t dev_id, a_uint32_t phy_addr,
-+                            a_uint32_t reg, a_uint16_t data)
-+{
-+        struct mii_bus *bus = NULL;
-+
-+        if (A_TRUE != phy_addr_validation_check (phy_addr))
-+        {
-+                return SW_BAD_PARAM;
-+        }
-+
-+        bus = ssdk_phy_miibus_get(dev_id, phy_addr);
-+        if (!bus)
-+                return SW_NOT_SUPPORTED;
-+
-+        mutex_lock(&bus->mdio_lock);
-+        __mdiobus_write(bus, phy_addr, reg, data);
-+        mutex_unlock(&bus->mdio_lock);
-+
-+        return 0;
-+}
-+
- a_uint32_t qca_mii_read(a_uint32_t dev_id, a_uint32_t reg)
- {
- 	a_uint32_t val = 0xffffffff;
--- 
-2.34.1
-

profiles/sercomm_ap72tip-v4.yml

@@ -1,16 +0,0 @@
----
-profile: sercomm_ap72tip-v4
-target: ipq53xx
-subtarget: generic
-description: Build image for the Sercomm AP72TIP-v4
-image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-v4-squashfs-sysupgrade.tar
-feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
-packages:
-  - ipq53xx
-  - qca-ssdk-shell
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sercomm_ap72tip.yml

@@ -2,14 +2,14 @@
 profile: sercomm_ap72tip
 target: ipq53xx
 subtarget: generic
-description: Build image for the Sercomm AP72TIP
+description: Build image for the Sercomm AP72 TIP
 image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-squashfs-sysupgrade.tar
 feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
+  - name: ipq95xx
+    path: ../../feeds/ipq95xx
 packages:
   - ipq53xx
+include:
+  - ucentral-ap
 diffconfig: |
   CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sonicfi_rap650c.yml

@@ -1,15 +0,0 @@
----
-profile: sonicfi_rap650c
-target: ipq807x
-subtarget: generic
-description: Build image for the SonicFi RAP650C
-image: bin/targets/ipq807x/generic/openwrt-ipq807x-sonicfi_rap650c-squashfs-sysupgrade.tar
-feeds:
-  - name: ipq807x
-    path: ../../feeds/ipq807x_v5.4
-include:
-  - ucentral-ap
-packages:
-  - ipq807x
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0