hostapd: proxy arp: fail gracefully

Disable proxy arp and continue if snoop interface setup fail.

Fixes WIFI-14507

Signed-off-by: Rick Sommerville <rick.sommerville@netexperience.com>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/patches/zzzz-001-fix-assoc-reject-during-roaming.patch

@@ -1,46 +0,0 @@
-Index: hostapd-2023-09-08-e5ccbfc6/src/ap/wpa_auth_ft.c
-===================================================================
---- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/wpa_auth_ft.c
-+++ hostapd-2023-09-08-e5ccbfc6/src/ap/wpa_auth_ft.c
-@@ -3293,6 +3297,8 @@ static int wpa_ft_process_auth_req(struc
- 	size_t identity_len = 0, radius_cui_len = 0;
- 	size_t pmk_r1_len, kdk_len, len;
- 	int retval = WLAN_STATUS_UNSPECIFIED_FAILURE;
-+	struct os_reltime now;
-+	struct rsn_ftie *ftie;
- 
- 	*resp_ies = NULL;
- 	*resp_ies_len = 0;
-@@ -3324,6 +3330,9 @@ static int wpa_ft_process_auth_req(struc
- 		goto out;
- 	}
- 
-+	ftie = (struct rsn_ftie *) parse.ftie;
-+	os_memcpy(sm->SNonce, ftie->snonce, WPA_NONCE_LEN);
-+
- 	if (parse.r0kh_id == NULL) {
- 		wpa_printf(MSG_DEBUG, "FT: Invalid FTIE - no R0KH-ID");
- 		retval = WLAN_STATUS_INVALID_FTIE;
-@@ -3424,10 +3433,18 @@ pmk_r1_derived:
- 	os_memcpy(sm->pmk_r1, pmk_r1, pmk_r1_len);
- 	sm->pmk_r1_len = pmk_r1_len;
- 
--	if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
--		wpa_printf(MSG_DEBUG, "FT: Failed to get random data for "
--			   "ANonce");
--		goto out;
-+	if (os_get_reltime(&now) < 0 ||
-+	    os_reltime_expired(&now, &sm->ANonce_time, 1)) {
-+		if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
-+			wpa_printf(MSG_DEBUG, "FT: Failed to get random data for "
-+				   "ANonce");
-+			return WLAN_STATUS_UNSPECIFIED_FAILURE;
-+		}
-+		sm->ANonce_time.sec = now.sec;
-+		sm->ANonce_time.usec = now.usec;
-+		wpa_printf(MSG_INFO, "FT: ANonce was randomized");
-+	} else {
-+		wpa_printf(MSG_INFO, "FT: ANonce has not expired");
- 	}
- 
- 	/* Now that we know the correct PMK-R1 length and as such, the length

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -53,7 +53,6 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
-	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -411,7 +410,6 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/hostapd/patches/zzz-FT-Store-PMK-R0-PMK-R1-after-EAPOL-Key-msg-2-4-MIC-v.patch

@@ -1,411 +0,0 @@
-From: Jouni Malinen <quic_jouni@quicinc.com>
-Date: Tue, 14 Feb 2023 11:29:30 +0200
-Subject: [PATCH] FT: Store PMK-R0/PMK-R1 after EAPOL-Key msg 2/4 MIC
- validation
-
-hostapd was previously storing the derived PMK-R0 and PMK-R1 as soon as
-these keys were derived. While that is fine for most purposes, it is
-unnecessary to do that so quickly and if anything were to fail before
-the supplicant is able to return a valid EAPOL-Key msg 2/4, there would
-not really be any real use for the derived keys.
-
-For the special case of FT-PSK and VLAN determination based on the
-wpa_psk file, the VLAN information is set in the per-STA data structures
-only after the EAPOL-Key msg 2/4 MIC has been verified. This ended up
-storing the PMK-R0/PMK-R1 entries without correct VLAN assignment and as
-such, any use of the FT protocol would not be able to transfer the VLAN
-information through RRB.
-
-Split local storing of the FT key hierarchy for the cases using the FT
-4-way handshake so that PMK-R0 and PMK-R1 are first derived and then
-stored as a separate step after having verified the MIC in the EAPOL-Key
-msg 2/4 (i.e., after having confirmed the per-STA passphrase/PSK was
-selected) and VLAN update. This fixes VLAN information for the
-wpa_psk_file cases with FT-PSK.
-
-Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
----
-
---- a/src/ap/wpa_auth.c
-+++ b/src/ap/wpa_auth.c
-@@ -58,7 +58,9 @@ static int wpa_group_config_group_keys(s
- 				       struct wpa_group *group);
- static int wpa_derive_ptk(struct wpa_state_machine *sm, const u8 *snonce,
- 			  const u8 *pmk, unsigned int pmk_len,
--			  struct wpa_ptk *ptk, int force_sha256);
-+			  struct wpa_ptk *ptk, int force_sha256,
-+			  u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
-+			  size_t *key_len);
- static void wpa_group_free(struct wpa_authenticator *wpa_auth,
- 			   struct wpa_group *group);
- static void wpa_group_get(struct wpa_authenticator *wpa_auth,
-@@ -940,6 +942,10 @@ static int wpa_try_alt_snonce(struct wpa
- 	const u8 *pmk = NULL;
- 	size_t pmk_len;
- 	int vlan_id = 0;
-+	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
-+	u8 pmk_r1[PMK_LEN_MAX];
-+	size_t key_len;
-+	int ret = -1;
- 
- 	os_memset(&PTK, 0, sizeof(PTK));
- 	for (;;) {
-@@ -961,8 +967,8 @@ static int wpa_try_alt_snonce(struct wpa
- 			pmk_len = sm->pmk_len;
- 		}
- 
--		if (wpa_derive_ptk(sm, sm->alt_SNonce, pmk, pmk_len, &PTK, 0) <
--		    0)
-+		if (wpa_derive_ptk(sm, sm->alt_SNonce, pmk, pmk_len, &PTK, 0,
-+				   pmk_r0, pmk_r1, pmk_r0_name, &key_len) < 0)
- 			break;
- 
- 		if (wpa_verify_key_mic(sm->wpa_key_mgmt, pmk_len, &PTK,
-@@ -983,7 +989,7 @@ static int wpa_try_alt_snonce(struct wpa
- 	if (!ok) {
- 		wpa_printf(MSG_DEBUG,
- 			   "WPA: Earlier SNonce did not result in matching MIC");
--		return -1;
-+		goto fail;
- 	}
- 
- 	wpa_printf(MSG_DEBUG,
-@@ -992,14 +998,26 @@ static int wpa_try_alt_snonce(struct wpa
- 
- 	if (vlan_id && wpa_key_mgmt_wpa_psk(sm->wpa_key_mgmt) &&
- 	    wpa_auth_update_vlan(sm->wpa_auth, sm->addr, vlan_id) < 0)
--		return -1;
-+		goto fail;
-+
-+#ifdef CONFIG_IEEE80211R_AP
-+	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt) && !sm->ft_completed) {
-+		wpa_printf(MSG_DEBUG, "FT: Store PMK-R0/PMK-R1");
-+		wpa_auth_ft_store_keys(sm, pmk_r0, pmk_r1, pmk_r0_name,
-+				       key_len);
-+	}
-+#endif /* CONFIG_IEEE80211R_AP */
- 
- 	os_memcpy(sm->SNonce, sm->alt_SNonce, WPA_NONCE_LEN);
- 	os_memcpy(&sm->PTK, &PTK, sizeof(PTK));
- 	forced_memzero(&PTK, sizeof(PTK));
- 	sm->PTK_valid = true;
- 
--	return 0;
-+	ret = 0;
-+fail:
-+	forced_memzero(pmk_r0, sizeof(pmk_r0));
-+	forced_memzero(pmk_r1, sizeof(pmk_r1));
-+	return ret;
- }
- 
- 
-@@ -2283,7 +2301,9 @@ SM_STATE(WPA_PTK, PTKSTART)
- 
- static int wpa_derive_ptk(struct wpa_state_machine *sm, const u8 *snonce,
- 			  const u8 *pmk, unsigned int pmk_len,
--			  struct wpa_ptk *ptk, int force_sha256)
-+			  struct wpa_ptk *ptk, int force_sha256,
-+			  u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
-+			  size_t *key_len)
- {
- 	const u8 *z = NULL;
- 	size_t z_len = 0, kdk_len;
-@@ -2311,7 +2331,8 @@ static int wpa_derive_ptk(struct wpa_sta
- 						 sm->pairwise,
- 						 kdk_len);
- 		}
--		return wpa_auth_derive_ptk_ft(sm, ptk);
-+		return wpa_auth_derive_ptk_ft(sm, ptk, pmk_r0, pmk_r1,
-+					      pmk_r0_name, key_len);
- 	}
- #endif /* CONFIG_IEEE80211R_AP */
- 
-@@ -2934,6 +2955,9 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 	struct wpa_eapol_ie_parse kde;
- 	int vlan_id = 0;
- 	int owe_ptk_workaround = !!wpa_auth->conf.owe_ptk_workaround;
-+	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
-+	u8 pmk_r1[PMK_LEN_MAX];
-+	size_t key_len;
- 
- 	SM_ENTRY_MA(WPA_PTK, PTKCALCNEGOTIATING, wpa_ptk);
- 	sm->EAPOLKeyReceived = false;
-@@ -2972,7 +2996,8 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 		}
- 
- 		if (wpa_derive_ptk(sm, sm->SNonce, pmk, pmk_len, &PTK,
--				   owe_ptk_workaround == 2) < 0)
-+				   owe_ptk_workaround == 2, pmk_r0, pmk_r1,
-+				   pmk_r0_name, &key_len) < 0)
- 			break;
- 
- 		if (mic_len &&
-@@ -3021,7 +3046,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 						 sm->last_rx_eapol_key,
- 						 sm->last_rx_eapol_key_len);
- 		sm->waiting_radius_psk = 1;
--		return;
-+		goto out;
- 	}
- 
- 	if (!ok) {
-@@ -3029,7 +3054,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 				"invalid MIC in msg 2/4 of 4-Way Handshake");
- 		if (psk_found)
- 			wpa_auth_psk_failure_report(sm->wpa_auth, sm->addr);
--		return;
-+		goto out;
- 	}
- 
- 	/*
-@@ -3043,12 +3068,12 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 	key_data_length = WPA_GET_BE16(mic + mic_len);
- 	if (key_data_length > sm->last_rx_eapol_key_len - sizeof(*hdr) -
- 	    sizeof(*key) - mic_len - 2)
--		return;
-+		goto out;
- 
- 	if (wpa_parse_kde_ies(key_data, key_data_length, &kde) < 0) {
- 		wpa_auth_vlogger(wpa_auth, sm->addr, LOGGER_INFO,
- 				 "received EAPOL-Key msg 2/4 with invalid Key Data contents");
--		return;
-+		goto out;
- 	}
- 	if (kde.rsn_ie) {
- 		eapol_key_ie = kde.rsn_ie;
-@@ -3075,7 +3100,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 		/* MLME-DEAUTHENTICATE.request */
- 		wpa_sta_disconnect(wpa_auth, sm->addr,
- 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
--		return;
-+		goto out;
- 	}
- 	if ((!sm->rsnxe && kde.rsnxe) ||
- 	    (sm->rsnxe && !kde.rsnxe) ||
-@@ -3091,7 +3116,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 		/* MLME-DEAUTHENTICATE.request */
- 		wpa_sta_disconnect(wpa_auth, sm->addr,
- 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
--		return;
-+		goto out;
- 	}
- #ifdef CONFIG_OCV
- 	if (wpa_auth_uses_ocv(sm)) {
-@@ -3103,14 +3128,14 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 		if (wpa_channel_info(wpa_auth, &ci) != 0) {
- 			wpa_auth_logger(wpa_auth, sm->addr, LOGGER_INFO,
- 					"Failed to get channel info to validate received OCI in EAPOL-Key 2/4");
--			return;
-+			goto out;
- 		}
- 
- 		if (get_sta_tx_parameters(sm,
- 					  channel_width_to_int(ci.chanwidth),
- 					  ci.seg1_idx, &tx_chanwidth,
- 					  &tx_seg1_idx) < 0)
--			return;
-+			goto out;
- 
- 		res = ocv_verify_tx_params(kde.oci, kde.oci_len, &ci,
- 					   tx_chanwidth, tx_seg1_idx);
-@@ -3127,7 +3152,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 					OCV_FAILURE "addr=" MACSTR
- 					" frame=eapol-key-m2 error=%s",
- 					MAC2STR(sm->addr), ocv_errorstr);
--			return;
-+			goto out;
- 		}
- 	}
- #endif /* CONFIG_OCV */
-@@ -3135,7 +3160,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 	if (ft && ft_check_msg_2_of_4(wpa_auth, sm, &kde) < 0) {
- 		wpa_sta_disconnect(wpa_auth, sm->addr,
- 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
--		return;
-+		goto out;
- 	}
- #endif /* CONFIG_IEEE80211R_AP */
- #ifdef CONFIG_P2P
-@@ -3171,7 +3196,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 				   "DPP: Peer indicated it supports PFS and local configuration allows this, but PFS was not negotiated for the association");
- 			wpa_sta_disconnect(wpa_auth, sm->addr,
- 					   WLAN_REASON_PREV_AUTH_NOT_VALID);
--			return;
-+			goto out;
- 		}
- 	}
- #endif /* CONFIG_DPP2 */
-@@ -3191,7 +3216,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 				    sm->sup_pmk_r1_name, WPA_PMK_NAME_LEN);
- 			wpa_hexdump(MSG_DEBUG, "FT: Derived PMKR1Name",
- 				    sm->pmk_r1_name, WPA_PMK_NAME_LEN);
--			return;
-+			goto out;
- 		}
- 	}
- #endif /* CONFIG_IEEE80211R_AP */
-@@ -3200,7 +3225,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 	    wpa_auth_update_vlan(wpa_auth, sm->addr, vlan_id) < 0) {
- 		wpa_sta_disconnect(wpa_auth, sm->addr,
- 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
--		return;
-+		goto out;
- 	}
- 
- 	sm->pending_1_of_4_timeout = 0;
-@@ -3216,9 +3241,20 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
- 
- 	sm->MICVerified = true;
- 
-+#ifdef CONFIG_IEEE80211R_AP
-+	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt) && !sm->ft_completed) {
-+		wpa_printf(MSG_DEBUG, "FT: Store PMK-R0/PMK-R1");
-+		wpa_auth_ft_store_keys(sm, pmk_r0, pmk_r1, pmk_r0_name,
-+				       key_len);
-+	}
-+#endif /* CONFIG_IEEE80211R_AP */
-+
- 	os_memcpy(&sm->PTK, &PTK, sizeof(PTK));
- 	forced_memzero(&PTK, sizeof(PTK));
- 	sm->PTK_valid = true;
-+out:
-+	forced_memzero(pmk_r0, sizeof(pmk_r0));
-+	forced_memzero(pmk_r1, sizeof(pmk_r1));
- }
- 
- 
---- a/src/ap/wpa_auth_ft.c
-+++ b/src/ap/wpa_auth_ft.c
-@@ -2175,13 +2175,13 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- }
- 
- 
--int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk)
-+int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk,
-+			   u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
-+			   size_t *key_len)
- {
--	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
- 	size_t pmk_r0_len = wpa_key_mgmt_sha384(sm->wpa_key_mgmt) ?
- 		SHA384_MAC_LEN : PMK_LEN;
- 	size_t pmk_r1_len = pmk_r0_len;
--	u8 pmk_r1[PMK_LEN_MAX];
- 	u8 ptk_name[WPA_PMK_NAME_LEN];
- 	const u8 *mdid = sm->wpa_auth->conf.mobility_domain;
- 	const u8 *r0kh = sm->wpa_auth->conf.r0_key_holder;
-@@ -2189,13 +2189,6 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 	const u8 *r1kh = sm->wpa_auth->conf.r1_key_holder;
- 	const u8 *ssid = sm->wpa_auth->conf.ssid;
- 	size_t ssid_len = sm->wpa_auth->conf.ssid_len;
--	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
--	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
--	struct vlan_description vlan;
--	struct rate_description rate;
--	const u8 *identity, *radius_cui;
--	size_t identity_len, radius_cui_len;
--	int session_timeout;
- 	const u8 *mpmk;
- 	size_t mpmk_len;
- 
-@@ -2211,10 +2204,41 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 		return -1;
- 	}
- 
-+	*key_len = pmk_r0_len;
-+	if (wpa_derive_pmk_r0(mpmk, mpmk_len, ssid, ssid_len, mdid,
-+			      r0kh, r0kh_len, sm->addr,
-+			      pmk_r0, pmk_r0_name,
-+			      pmk_r0_len == SHA384_MAC_LEN) < 0 ||
-+	    wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
-+			      pmk_r1, sm->pmk_r1_name) < 0)
-+		return -1;
-+
-+	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
-+				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
-+				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
-+				 0);
-+}
-+
-+
-+void wpa_auth_ft_store_keys(struct wpa_state_machine *sm, const u8 *pmk_r0,
-+			    const u8 *pmk_r1, const u8 *pmk_r0_name,
-+			    size_t key_len)
-+{
-+	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
-+	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
-+	struct vlan_description vlan;
-+	struct rate_description rate;
-+	const u8 *identity, *radius_cui;
-+	size_t identity_len, radius_cui_len;
-+	int session_timeout;
-+
-+	if (psk_local && wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
-+		return;
-+
- 	if (wpa_ft_get_vlan(sm->wpa_auth, sm->addr, &vlan) < 0) {
- 		wpa_printf(MSG_DEBUG, "FT: vlan not available for STA " MACSTR,
- 			   MAC2STR(sm->addr));
--		return -1;
-+		return;
- 	}
- 
- 	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
-@@ -2224,32 +2248,16 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 					       &radius_cui);
- 	session_timeout = wpa_ft_get_session_timeout(sm->wpa_auth, sm->addr);
- 
--	if (wpa_derive_pmk_r0(mpmk, mpmk_len, ssid, ssid_len, mdid,
--			      r0kh, r0kh_len, sm->addr,
--			      pmk_r0, pmk_r0_name,
--			      wpa_key_mgmt_sha384(sm->wpa_key_mgmt)) < 0)
--		return -1;
--	if (!psk_local || !wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
--		wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
--				    pmk_r0_name,
--				    sm->pairwise, &vlan, expires_in,
--				    session_timeout, identity, identity_len,
--				    radius_cui, radius_cui_len, &rate);
--
--	if (wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
--			      pmk_r1, sm->pmk_r1_name) < 0)
--		return -1;
--	if (!psk_local || !wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
--		wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, pmk_r1_len,
--				    sm->pmk_r1_name, sm->pairwise, &vlan,
--				    expires_in, session_timeout, identity,
--				    identity_len, radius_cui, radius_cui_len,
--				    &rate);
--
--	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
--				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
--				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
--				 0);
-+	wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, key_len,
-+			    pmk_r0_name,
-+			    sm->pairwise, &vlan, expires_in,
-+			    session_timeout, identity, identity_len,
-+			    radius_cui, radius_cui_len, &rate);
-+
-+	wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, key_len,
-+			    sm->pmk_r1_name, sm->pairwise, &vlan,
-+			    expires_in, session_timeout, identity,
-+			    identity_len, radius_cui, radius_cui_len, &rate);
- }
- 
- 
---- a/src/ap/wpa_auth_i.h
-+++ b/src/ap/wpa_auth_i.h
-@@ -302,7 +302,12 @@ int wpa_write_ftie(struct wpa_auth_confi
- 		   const u8 *anonce, const u8 *snonce,
- 		   u8 *buf, size_t len, const u8 *subelem,
- 		   size_t subelem_len, int rsnxe_used);
--int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk);
-+int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk,
-+			   u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
-+			   size_t *key_len);
-+void wpa_auth_ft_store_keys(struct wpa_state_machine *sm, const u8 *pmk_r0,
-+			    const u8 *pmk_r1, const u8 *pmk_r0_name,
-+			    size_t key_len);
- struct wpa_ft_pmk_cache * wpa_ft_pmk_cache_init(void);
- void wpa_ft_pmk_cache_deinit(struct wpa_ft_pmk_cache *cache);
- void wpa_ft_install_ptk(struct wpa_state_machine *sm, int retry);

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -13,10 +13,10 @@ qcom_setup_interfaces()
 
 	case $board in
 	cig,wf186w)
-		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6u@eth0"
+		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6@eth0"
 		;;
 	cig,wf186h)
-		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6u@eth0"
+		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6@eth0"
 		;;
 	sonicfi,rap630c-311g|\
 	cybertan,eww631-a1)
@@ -25,7 +25,7 @@ qcom_setup_interfaces()
 		;;
 	sonicfi,rap630w-311g|\
 	cybertan,eww631-b1)
-		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6u@eth0"
+		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
 		;;
 	udaya,a6-id2)
 		ucidef_set_interface_wan "eth1"
@@ -46,7 +46,7 @@ qcom_setup_interfaces()
 	edgecore,eap104)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch1" \
-			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
@@ -62,10 +62,10 @@ qcom_setup_interfaces()
 	sonicfi,rap630w-312g|\
 	yuncore,fap655)
 		ucidef_add_switch "switch1" \
-			"6u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+			"6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
 	glinet,b3000)
-		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
+		ucidef_add_switch "switch1" "6@eth1" "1:wan" "2:lan" "3:lan"
 		;;
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -21,7 +21,6 @@ edgecore,oap103)
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
-sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -24,7 +24,6 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
-	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -51,16 +50,6 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
-	sonicfi,rap650c)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ip link set eth0 address $wan_mac
-		ip link set eth1 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,20 +16,6 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_sonicfi() {
-	mac=$(fw_printenv -n BaseMacAddress)
-	[ -z "$mac" ] && return;
-
-	touch /lib/firmware/ath11k-macs
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	mac3=$(macaddr_add $eth 4)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -77,7 +63,6 @@ case "$FIRMWARE" in
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
-	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -112,9 +97,6 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi*)
-		ath11k_generate_macs_sonicfi
-		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,8 +10,7 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103"|\
-    "sonicfi,rap650c")
+    "edgecore,oap103")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,7 +29,6 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
-	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -84,17 +83,5 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	sonicfi,rap650c)
-		boot_part=$(fw_printenv -n bootfrom)
-		[ ${#boot_part} -eq 0 ] && boot_part=0
-		echo "Current bootfrom is $boot_part"
-		if [[ $boot_part == 1 ]]; then
-			CI_UBIPART="rootfs"
-			CI_FWSETENV="bootfrom 0"
-		elif [[ $boot_part == 0 ]]; then
-			CI_UBIPART="rootfs_1"
-			CI_FWSETENV="bootfrom 1"
-		fi
-		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -1,650 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "SonicFi RAP650C";
-	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
-	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio57";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			usb_mux_sel_pins: usb_mux_pins {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			pcie0_pins: pcie_pins {
-				pcie0_rst {
-					pins = "gpio58";
-					function = "pcie0_rst";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				pcie0_wake {
-					pins = "gpio59";
-					function = "pcie0_wake";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio25";
-					function = "gpio";
-					bias-pull-up;
-				};
-				mux_3 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			led_pins: led_pins {
-				red {
-					pins = "gpio0";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				green {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				blue {
-					pins = "gpio9";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			spi_3_pins: spi_3_pins {
-				mux {
-					pins = "gpio50", "gpio52", "gpio53";
-					function = "blsp3_spi";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				spi_cs {
-					pins = "gpio22";
-					function = "blsp3_spi2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				quartz_interrupt {
-					pins = "gpio47";
-					function = "gpio";
-					input;
-					bias-disable;
-				};
-				quartz_reset {
-					pins = "gpio21";
-					function = "gpio";
-					output-low;
-					bias-disable;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <5>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <24>;
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001a00 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		spi@78b8000 {
-			status = "ok";
-			pinctrl-0 = <&spi_3_pins>;
-			pinctrl-names = "default";
-			cs-select = <2>;
-			quartz-reset-gpio = <&tlmm 21 1>;
-
-			spidev3: spi@3 {
-				  compatible = "qti,spidev";
-				  reg = <0>;
-				  spi-max-frequency = <24000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		qusb@79000 {
-			status = "ok";
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		usb3@8A00000 {
-			status = "ok";
-		};
-
-		qusb@59000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		usb3@8C00000 {
-			status = "ok";
-		};
-
-		phy@84000 {
-			status = "ok";
-		};
-
-		phy@86000 {
-			status = "ok";
-		};
-
-		pci@20000000 {
-			perst-gpio = <&tlmm 58 1>;
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-
-			red {
-				label = "sys:red";
-				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			green {
-				label = "sys:green";
-				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led_power: blue {
-				label = "sys:blue";
-				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <24>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <24>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x90>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,17 +57,6 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
-define Device/sonicfi_rap650c
-  DEVICE_TITLE := SonicFi RAP650C
-  DEVICE_DTS := qcom-ipq807x-rap650c
-  DEVICE_DTS_CONFIG=config@hk09
-  SUPPORTED_DEVICES := sonicfi,rap650c
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap650c
-
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981b-sonicfi-rap630w-211g.dts

@@ -9,11 +9,6 @@
 / {
 	aliases {
 		serial0 = &uart0;
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -44,22 +39,31 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led_power: led_blue {
+		led_blue {
 			label = "sys:blue";
 			gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
-			default-state="off";
+			linux,default-trigger = "timer";
+			active-delay = <500>;
+			inactive-delay = <500>;
+			default-state="on";
 		};
 
 		led_green {
 			label = "sys:green";
 			gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
-			default-state="off";
+			linux,default-trigger = "timer";
+			active-delay = <500>;
+			inactive-delay = <500>;
+			default-state="on";
 		};
 
 		led_red {
 			label = "sys:red";
 			gpios = <&pio 25 GPIO_ACTIVE_LOW>;
-			default-state="off";
+			linux,default-trigger = "timer";
+			active-delay = <500>;
+			inactive-delay = <500>;
+			default-state="on";
 		};
 	};
 };
@@ -109,7 +113,7 @@
 
 							port@0 {
 									reg = <0>;
-									label = "lan3";
+									label = "lan1";
 							};
 
 							port@1 {
@@ -119,7 +123,7 @@
 
 							port@2 {
 									reg = <2>;
-									label = "lan1";
+									label = "lan3";
 							};
 
 							port@6 {

feeds/qca-wifi-7/ath12k-firmware/Makefile

@@ -42,15 +42,6 @@ define Package/ath12k-firmware-ipq5332-peb/description
 Standard ath12k firmware for IPQ5332 + Pebble from QCA
 endef
 
-define Package/ath12k-firmware-ipq5332-peb-peb
-$(Package/ath12k-firmware-default)
-  TITLE:=ath12k firmware for IPQ5332 + Pebble + Pebble devices
-endef
-
-define Package/ath12k-firmware-ipq5332-peb-peb/description
-Standard ath12k firmware for IPQ5332 + Pebble + Pebble from QCA
-endef
-
 define Build/Compile
 
 endef
@@ -76,16 +67,6 @@ define Package/ath12k-firmware-ipq5332-peb/install
 		$(1)/lib/firmware/qcn6432/
 endef
 
-define Package/ath12k-firmware-ipq5332-peb-peb/install
-	$(INSTALL_DIR) $(1)/lib/firmware/IPQ5332/
-	$(INSTALL_DIR) $(1)/lib/firmware/qcn6432/
-	$(INSTALL_DATA) ./files/IPQ5332_peb_peb/*.* \
-		$(1)/lib/firmware/IPQ5332/
-	$(INSTALL_DATA) ./files/IPQ5332_peb_peb/qcn6432/* \
-		$(1)/lib/firmware/qcn6432/
-endef
-
 $(eval $(call BuildPackage,ath12k-firmware-qcn92xx))
 $(eval $(call BuildPackage,ath12k-firmware-ipq5332))
 $(eval $(call BuildPackage,ath12k-firmware-ipq5332-peb))
-$(eval $(call BuildPackage,ath12k-firmware-ipq5332-peb-peb))

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/iu_fw.flist

@@ -1,3 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/iu_fw.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/iu_fw.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/iu_fw.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw0.flist

@@ -1,11 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b02
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b03
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b04
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b05
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b06
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b07
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b08
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b09
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b11

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw1.flist

@@ -1,3 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw1.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw1.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw1.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw2.flist

@@ -1,3 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw2.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw2.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw2.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw3.flist

@@ -1,3 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw3.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw3.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw3.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw4.flist

@@ -1,3 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw4.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw4.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw4.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qcn6432/fw_ini_cfg.bin

@@ -1,16 +0,0 @@
-//Number of VAPs
-{"Mode": 0,"num vap":17}    // Max VAP support is 17 per MAC
-{"Mode": 1,"num vap":17}    // Max VAP support is 17 per MAC
-{"Mode": 2,"num vap":17}    // Max VAP support is 17 per MAC
-
-//Number of clients
-{"Mode":0, "num clients":256}   // Max client support is 256 for both single MAC and dual MAC
-{"Mode":1, "num clients":256}   // Max client support is 256 per MAC
-{"Mode":2, "num clients":256}   // Max client support is 256 per MAC
-
-// Please do not reduce the default configuration while working in QWRAP Mode.
-
-//AFC Proxy ,Deployment type ,Power mode mask INI configuration
-{"afc_local_rsvd":0,"Deployment_Type":1,"Power_mode_mask":7}
-2<EFBFBD>=R<02>[I<>
-<EFBFBD>;<3B>b|G%<25><><19><05>ъ[<5B>nT

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qcn6432/iu_fw.flist

@@ -1,3 +0,0 @@
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/qcn6432/iu_fw.b00
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/qcn6432/iu_fw.b01
-build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/qcn6432/iu_fw.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qcn6432/qdss_trace_config.bin

@@ -1,181 +0,0 @@
-seq_start;
-seq_type:mem_req;
-sink:etr_ddr,0x1,0x400;
-seq_end;
-seq_start;
-seq_type:mac_event_trace;
-subsys_cfg_start:umac;
-cxc_eb0:0x2,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
-reo_eb0:0x4,0x61C81F4,0x0,0x0,0x0;
-tqm_eb0:0x5,0xCDB3C6C6,0x803007E0,0x0,0x0;
-tcl_eb0:0x6,0x25030034,0x3000,0x0,0x0;
-wbm_eb0:0x7,0x880004,0x380000,0x0,0x0;
-cxc_eb1:0x8,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
-tcl_eb1:0x9,0x25030034,0x3000,0x0,0x0;
-reo_eb1:0xA,0x61C81F4,0x0,0x0,0x0;
-tqm_eb1:0xB,0xCDB3C6C6,0x803007E0,0x0,0x0;
-wbm_eb1:0xC,0x880004,0x380000,0x0,0x0;
-mxi:0xD,0x122234,0x0,0x0,0x0;
-wsib:0xE,0x0,0x0,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:umac;
-subsys_cfg_start:dmac;
-swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
-txdma_eb0:0x1,0x200,0x0,0x0,0x0;
-txdma_eb1:0x2,0xD9220,0xAF0,0x0,0x0;
-txdma_eb2:0x3,0xD9220,0xAF0,0x0,0x0;
-rxdma_eb0:0x4,0x93297E3F,0xC00000,0x0,0x0;
-rxdma_eb1:0x5,0x707F,0x0,0x0,0x0;
-txole_eb0:0x6,0xFFFFFFFF,0x0,0x0,0x0;
-txole_eb1:0x7,0x781F0734,0x6,0x0,0x0;
-txole_eb2:0x8,0x781F0734,0x6,0x0,0x0;
-rxole_eb0:0x9,0xF,0x0,0x0,0x0;
-rxole_eb1:0xA,0x7F,0x0,0x0,0x0;
-rxole_eb2:0xB,0x7F,0x0,0x0,0x0;
-crypto:0xC,0xFF3FFF,0x0,0x0,0x0;
-mxi:0xD,0x122234,0x0,0x0,0x0;
-sfm_eb0:0xE,0x40000003,0x7F8,0x0,0x0;
-rxmon_eb0:0x14,0x22800010,0x40A00,0x0,0x0;
-rxmon_eb1:0x15,0x18005000,0x18,0x0,0x0;
-txmon_eb0:0x12,0x22800010,0x40A00,0x0,0x0;
-txmon_eb1:0x13,0x98005000,0x199,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:dmac;
-subsys_cfg_start:pmac0;
-swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
-hwsch:0x1,0x803FFFF7,0x30003,0x0,0x0;
-pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
-txpcu_eb0:0x8,0xE87A047,0x132,0x0,0x0;
-rxpcu_eb0:0x9,0x10060217,0x1F24500,0x0,0x0;
-rri:0xa,0x0,0x0,0x0,0x0;
-ampi:0xb,0x69C07,0x0,0x0,0x0;
-mxi:0xd,0x122234,0x0,0x0,0x0;
-txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
-sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
-rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
-hwmlo:0x1c,0x1C100004,0x7800,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:pmac0;
-subsys_cfg_start:pmac1;
-swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
-hwsch:0x1,0x803FFFF7,0x30003,0x0,0x0;
-pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
-txpcu_eb0:0x8,0xE87A047,0x132,0x0,0x0;
-rxpcu_eb0:0x9,0x10060217,0x1F24500,0x0,0x0;
-rri:0xa,0x0,0x0,0x0,0x0;
-ampi:0xb,0x69C07,0x0,0x0,0x0;
-mxi:0xd,0x122234,0x0,0x0,0x0;
-txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
-sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
-rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
-hwmlo:0x1c,0x1C100004,0x7800,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:pmac1;
-seq_end;
-seq_start;
-seq_type:phy_event_trace;
-subsys_cfg_start:phya0;
-data_tlv:0;
-wsi:0x0,0x00000000,0x00000000;
-rfcntl:0x0,0x00000000,0x00000000;
-tpc:0x0,0x00000000,0x00000000;
-cal:0x0,0x00000000,0x00000000;
-impcorr:0x0,0x00000000,0x00000000;
-mpi:0x6,0x00000006,0x00000000;
-fft:0x0,0x00000000,0x00000000;
-txtd:0x0,0x00000000,0x00000000;
-pmi:0x9,0x0000000A,0x00000000;
-rxtd:0xa,0x0000000A,0x00000000;
-demfront:0x0,0x00000000,0x00000000;
-pcss:0xc,0x0000003E,0x00000000;
-txfd:0x0,0x00000000,0x00000000;
-robe:0x0,0x00000000,0x00000000;
-dmac_0_1:0x0,0x00000000,0x00000000;
-dmac_2_3:0x0,0x00000000,0x00000000;
-dmac_4_5:0x0,0x00000000,0x00000000;
-dmac_6:0x0,0x00000000,0x00000000;
-eos:0x0,0x00000000,0x00000000;
-subsys_cfg_end:phya0;
-//subsys_cfg_start:phya1;
-//data_tlv:1;
-//wsi:0x0,0x00000000,0x00000000;
-//rfcntl:0x0,0x00000000,0x00000000;
-//tpc:0x0,0x00000000,0x00000000;
-//cal:0x0,0x00000000,0x00000000;
-//impcorr:0x0,0x00000000,0x00000000;
-//mpi:0x6,0x00000006,0x00000000;
-//fft:0x0,0x00000000,0x00000000;
-//txtd:0x0,0x00000000,0x00000000;
-//pmi:0x9,0x0000000A,0x00000000;
-//rxtd:0xa,0x0000000A,0x00000000;
-//demfront:0x0,0x00000000,0x00000000;
-//pcss:0xc,0x0000003E,0x00000000;
-//txfd:0x0,0x00000000,0x00000000;
-//robe:0x0,0x00000000,0x00000000;
-//dmac_0_1:0x0,0x00000000,0x00000000;
-//dmac_2_3:0x0,0x00000000,0x00000000;
-//dmac_4_5:0x0,0x00000000,0x00000000;
-//dmac_6:0x0,0x00000000,0x00000000;
-//eos:0x0,0x00000000,0x00000000;
-//subsys_cfg_end:phya1;
-seq_end;
-//seq_start;
-//seq_type:noc_trace;
-//noc_id:umacnoc;
-//syncoutperiod:0x1F;
-//probe_id:0x0;
-//probe_type:0x2;
-//probe_andinv:0x0;
-//probe_portsel:0x1;
-//filter0_path:0x0;
-//filter0_path_mask:0x0;
-//filter0_addr_min_lo:0x0;
-//filter0_addr_min_hi:0x0;
-//filter0_addr_max_lo:0xFFFFFFFF;
-//filter0_addr_max_hi:0xF;
-//filter0_opcode:0x3;
-//filter0_status:0x3;
-//filter0_trtype:0x0;
-//filter0_extid:0x0;
-//filter0_extid_mask:0x0;
-//filter1_path:0x0;
-//filter1_path_mask:0x0;
-//filter1_addr_min_lo:0x0;
-//filter1_addr_min_hi:0x0;
-//filter1_addr_max_lo:0xFFFFFFFF;
-//filter1_addr_max_hi:0xF;
-//filter1_opcode:0x3;
-//filter1_status:0x3;
-//filter1_trtype:0x0;
-//filter1_extid:0x0;
-//filter1_extid_mask:0x0;
-//seq_end;
-//seq_start;
-//seq_type:mac_tlv_trace;
-//subsys_cfg_start:pmac0;
-//tlv_port:tqm_hwsch_tlv;
-//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
-//tlv_config:1,3,3,3;
-//memw:0x2,0x10220A0,0xFFFFFDFF,0x10220B0,0x7FFFFFFF;
-//subsys_cfg_end:pmac0;
-//seq_end;
-//seq_start;
-//seq_start;
-//seq_type:mac_tlv_trace;
-//subsys_cfg_start:pmac1;
-//tlv_port:tqm_hwsch_tlv;
-//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
-//tlv_config:1,3,3,3;
-//memw:0x2,0x10220A0,0xFFFFFDFF,0x10220B0,0x7FFFFFFF;
-//subsys_cfg_end:pmac1;
-//seq_end;
-//seq_start;
-//seq_type:mac_obo_trace;
-//subsys_cfg_start:pmac0;
-//tbus_port:pdg_testbus, 0x7;
-//memw:0x0;
-//subsys_cfg_end:pmac0;
-//seq_end;
-//seq_start;
-//seq_type:irq_trace;
-//seq_end;

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qdss_trace_config.bin

@@ -1,133 +0,0 @@
-seq_start;
-seq_type:mem_req;
-sink:etr_ddr,0x1,0x400;
-seq_end;
-seq_start;
-seq_type:mac_event_trace;
-subsys_cfg_start:umac;
-cxc_eb0:0x2,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
-reo_eb0:0x4,0x61C81F4,0x0,0x0,0x0;
-tqm_eb0:0x5,0xCDB3C6C6,0x803007E0,0x0,0x0;
-tcl_eb0:0x6,0x25030034,0x3000,0x0,0x0;
-wbm_eb0:0x7,0x880004,0x380000,0x0,0x0;
-cxc_eb1:0x8,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
-tcl_eb1:0x9,0x25030034,0x3000,0x0,0x0;
-reo_eb1:0xA,0x61C81F4,0x0,0x0,0x0;
-tqm_eb1:0xB,0xCDB3C6C6,0x803007E0,0x0,0x0;
-wbm_eb1:0xC,0x880004,0x380000,0x0,0x0;
-wsib:0xE,0x0,0x0,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:umac;
-subsys_cfg_start:dmac;
-swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
-txdma_eb0:0x1,0x0,0x0,0x0,0x0;
-txdma_eb1:0x2,0x286C0,0x83C304,0x0,0x0;
-txdma_eb2:0x3,0x286C0,0x83C304,0x0,0x0;
-rxdma_eb0:0x4,0x93297E3F,0xC00000,0x0,0x0;
-rxdma_eb1:0x5,0x707F,0x0,0x0,0x0;
-txole_eb0:0x6,0xFFFFFFFF,0x0,0x0,0x0;
-txole_eb1:0x7,0x781F0734,0x6,0x0,0x0;
-txole_eb2:0x8,0x781F0734,0x6,0x0,0x0;
-rxole_eb0:0x9,0xF,0x0,0x0,0x0;
-rxole_eb1:0xA,0x7F,0x0,0x0,0x0;
-rxole_eb2:0xB,0x7F,0x0,0x0,0x0;
-crypto:0xC,0xFF3FFF,0x0,0x0,0x0;
-mxi:0xD,0x122234,0x0,0x0,0x0;
-sfm_eb0:0xE,0x40000003,0x7F8,0x0,0x0;
-rxmon_eb0:0x14,0x0,0x0,0x0,0x0;
-rxmon_eb1:0x15,0x0,0x0,0x0,0x0;
-txmon_eb0:0x12,0x0,0x0,0x0,0x0;
-txmon_eb1:0x13,0x0,0x0,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:dmac;
-subsys_cfg_start:pmac0;
-swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
-hwsch:0x1,0x3FFFF7,0x30000,0x0,0x0;
-pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
-txpcu_eb0:0x8,0xE87A047,0x112,0x0,0x0;
-rxpcu_eb0:0x9,0x10060217,0x1824500,0x0,0x0;
-rri:0xa,0x0,0x0,0x0,0x0;
-ampi:0xb,0x69C07,0x0,0x0,0x0;
-mxi:0xd,0x122234,0x0,0x0,0x0;
-txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
-sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
-rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
-hwmlo:0x1c,0x1C100004,0x0,0x0,0x0;
-memw:0x0;
-subsys_cfg_end:pmac0;
-seq_end;
-seq_start;
-seq_type:phy_event_trace;
-subsys_cfg_start:phya0;
-data_tlv:0;
-wsi:0x0,0x00000000,0x00000000;
-rfcntl:0x0,0x00000000,0x00000000;
-tpc:0x0,0x00000000,0x00000000;
-cal:0x0,0x00000000,0x00000000;
-impcorr:0x0,0x00000000,0x00000000;
-mpi:0x6,0x00000006,0x00000000;
-fft:0x0,0x00000000,0x00000000;
-txtd:0x0,0x00000000,0x00000000;
-pmi:0x9,0x0000000A,0x00000000;
-rxtd:0xa,0x0000000A,0x00000000;
-demfront:0x0,0x00000000,0x00000000;
-pcss:0xc,0x0000003E,0x00000000;
-txfd:0x0,0x00000000,0x00000000;
-robe:0x0,0x00000000,0x00000000;
-dmac_0_1:0x0,0x00000000,0x00000000;
-dmac_2_3:0x0,0x00000000,0x00000000;
-dmac_4_5:0x0,0x00000000,0x00000000;
-dmac_6:0x0,0x00000000,0x00000000;
-eos:0x0,0x00000000,0x00000000;
-subsys_cfg_end:phya0;
-seq_end;
-//seq_start;
-//seq_type:noc_trace;
-//noc_id:umacnoc;
-//syncoutperiod:0x1F;
-//probe_id:0x0;
-//probe_type:0x2;
-//probe_andinv:0x0;
-//probe_portsel:0x1;
-//filter0_path:0x0;
-//filter0_path_mask:0x0;
-//filter0_addr_min_lo:0x0;
-//filter0_addr_min_hi:0x0;
-//filter0_addr_max_lo:0xFFFFFFFF;
-//filter0_addr_max_hi:0xF;
-//filter0_opcode:0x3;
-//filter0_status:0x3;
-//filter0_trtype:0x0;
-//filter0_extid:0x0;
-//filter0_extid_mask:0x0;
-//filter1_path:0x0;
-//filter1_path_mask:0x0;
-//filter1_addr_min_lo:0x0;
-//filter1_addr_min_hi:0x0;
-//filter1_addr_max_lo:0xFFFFFFFF;
-//filter1_addr_max_hi:0xF;
-//filter1_opcode:0x3;
-//filter1_status:0x3;
-//filter1_trtype:0x0;
-//filter1_extid:0x0;
-//filter1_extid_mask:0x0;
-//seq_end;
-//seq_start;
-//seq_type:mac_tlv_trace;
-//subsys_cfg_start:pmac0;
-//tlv_port:txpcu_ampi_tlv;
-//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
-//tlv_config:1,3,3,3;
-//memw:0x0;
-//subsys_cfg_end:pmac0;
-//seq_end;
-//seq_start;
-//seq_type:mac_obo_trace;
-//subsys_cfg_start:pmac0;
-//tbus_port:pdg_testbus, 0x7;
-//memw:0x0;
-//subsys_cfg_end:pmac0;
-//seq_end;
-//seq_start;
-//seq_type:irq_trace;
-//seq_end;

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -53,27 +53,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750W_311a
 endef
 
-define Package/ath12k-wifi-cig-wf189h
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WF189H
-endef
-
-define Package/ath12k-wifi-cig-wf189w
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WF189W
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for AP72TIP
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip-v4
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for AP72TIP-v4
-endef
-
-
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -104,42 +83,7 @@ define Package/ath12k-wifi-sonicfi-rap750w-311a/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
-define Package/ath12k-wifi-cig-wf189w/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189w.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.189w.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
-endef
-
-
-define Package/ath12k-wifi-cig-wf189h/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.ap72tip.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.ap72tip.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip-v4/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
-$(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
-$(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-v4-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-v4-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -9,9 +9,3 @@ $encoder -c board-2-eap105-QCN92XX.json -o board-2.bin.eap105.QCN92XX
 
 $encoder -c board-2-rap7110c_341x-IPQ5332.json -o board-2.bin.rap7110c_341x.IPQ5332
 $encoder -c board-2-rap7110c_341x-QCN92XX.json -o board-2.bin.rap7110c_341x.QCN92XX
-
-$encoder -c board-2-ap72tip-IPQ5332.json -o board-2.bin.ap72tip.IPQ5332
-$encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
-
-$encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
-$encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -73,10 +73,6 @@ hostapd_append_wpa_key_mgmt() {
 		owe)
 			append wpa_key_mgmt "OWE"
 		;;
-		psk2-radius)
-			append wpa_key_mgmt "WPA-PSK"
-			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
-		;;
 	esac
 
 	[ "$fils" -gt 0 ] && {
@@ -126,15 +122,12 @@ hostapd_common_add_device_config() {
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
-	config_add_boolean maxassoc_ignore_probe
 
 	config_add_string acs_chan_bias
-	config_add_boolean acs_exclude_dfs
 	config_add_array hostapd_options
 
 	config_add_int airtime_mode
 	config_add_int mbssid
-	config_add_boolean rnr_beacon ema
 
 	hostapd_add_log_config
 }
@@ -145,11 +138,10 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
 		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
-		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
-		maxassoc_ignore_probe band
+		mbssid:0 band reg_power_type stationary_ap
 
 	hostapd_set_log_options base_cfg
 
@@ -159,9 +151,6 @@ hostapd_prepare_device_config() {
 	set_default legacy_rates 0
 	set_default airtime_mode 0
 	set_default cell_density 0
-	set_default rnr_beacon 0
-	set_default ema 0
-	set_default acs_exclude_dfs 0
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
@@ -251,14 +240,8 @@ hostapd_prepare_device_config() {
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 	append base_cfg "beacon_int=$beacon_int" "$N"
 	[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
-	append base_cfg "dtim_period=$dtim_period" "$N"
 	[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
 	[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
-	[ "$maxassoc_ignore_probe" -gt 0 ] && append base_cfg "no_probe_resp_if_max_sta=1" "$N"
-	[ "$rnr_beacon" -gt 0 ] && append base_cfg "rnr_beacon=$rnr_beacon" "$N"
-	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
-	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"
-
 	[ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N"
 
 	[ "$band" = "6g" ] && {
@@ -300,24 +283,15 @@ hostapd_common_add_bss_config() {
 	config_add_int ieee80211w
 	config_add_int eapol_version
 
-	config_add_string 'auth_server:host' 'server:host'
+	config_add_array auth_server acct_server
+	config_add_string 'server:host'
 	config_add_string auth_secret key
 	config_add_int 'auth_port:port' 'port:port'
 
-	config_add_string acct_server
 	config_add_string acct_secret
 	config_add_int acct_port
-
-	config_add_string acct_server_secondary
-	config_add_string acct_secret_secondary
-	config_add_int acct_port_secondary
-
 	config_add_int acct_interval
 
-	config_add_string auth_server_secondary
-	config_add_string auth_secret_secondary
-	config_add_int auth_port_secondary
-
 	config_add_int bss_load_update_period chan_util_avg_period
 
 	config_add_string dae_client
@@ -361,8 +335,8 @@ hostapd_common_add_bss_config() {
 	config_add_string lci civic
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
-	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
-	config_add_string mobility_domain r1_key_holder ft_key
+	config_add_int r0_key_lifetime reassociation_deadline
+	config_add_string mobility_domain r1_key_holder
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -413,18 +387,14 @@ hostapd_common_add_bss_config() {
 	config_add_array radius_auth_req_attr
 	config_add_array radius_acct_req_attr
 
-	config_add_int eap_server
-	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
+	config_add_int eap_server radius_server_auth_port
+	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients
 
 	config_add_boolean fils
 	config_add_string fils_dhcp
 
-	config_add_boolean ratelimit
 	config_add_int ocv
 
-	config_add_string uci_section
-	config_add_boolean dynamic_probe_resp
-
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
 }
@@ -459,7 +429,6 @@ hostapd_set_psk() {
 	local ifname="$1"
 
 	rm -f /var/run/hostapd-${ifname}.psk
-	touch /var/run/hostapd-${ifname}.psk
 	for_each_station hostapd_set_psk_file ${ifname}
 }
 
@@ -576,83 +545,18 @@ append_airtime_sta_weight() {
 	[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
 }
 
-append_radius_server() {
+append_auth_server() {
+	[ -n "$1" ] || return
+	append bss_conf "auth_server_addr=$1" "$N"
+	append bss_conf "auth_server_port=$auth_port" "$N"
+	[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+}
 
-	json_get_vars \
-		auth_server auth_secret auth_port \
-		auth_server_secondary auth_secret_secondary auth_port_secondary \
-		dae_client dae_secret dae_port \
-		dynamic_ownip ownip radius_client_addr \
-		eap_reauth_period request_cui \
-		erp_domain mobility_domain \
-		fils_realm fils_dhcp
-
-	set_default dynamic_ownip 1
-
-	# legacy compatibility
-	[ -n "$auth_server" ] || json_get_var auth_server server
-	[ -n "$auth_port" ] || json_get_var auth_port port
-	[ -n "$auth_secret" ] || json_get_var auth_secret key
-
-	[ "$fils" -gt 0 ] && {
-		set_default erp_domain "$mobility_domain"
-		set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
-		set_default fils_realm "$erp_domain"
-
-		append bss_conf "erp_send_reauth_start=1" "$N"
-		append bss_conf "erp_domain=$erp_domain" "$N"
-		append bss_conf "fils_realm=$fils_realm" "$N"
-		append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
-
-		[ "$fils_dhcp" = "*" ] && {
-			json_get_values network network
-			fils_dhcp=
-			for net in $network; do
-				fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
-				[ -n "$fils_dhcp" ] && break
-			done
-
-			[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
-				fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
-		}
-		[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
-	}
-
-	set_default auth_port 1812
-	set_default auth_port_secondary 1812
-	set_default dae_port 3799
-	set_default request_cui 0
-
-	[ "$eap_server" -eq 0  -a -n "$auth_server" ] && {
-		append bss_conf "auth_server_addr=$auth_server" "$N"
-		append bss_conf "auth_server_port=$auth_port" "$N"
-		append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-	}
-
-	[ -n "$auth_server_secondary" ] && {
-		append bss_conf "auth_server_addr=$auth_server_secondary" "$N"
-		append bss_conf "auth_server_port=$auth_port_secondary" "$N"
-		[ -n "$auth_secret_secondary" ] && \
-			append bss_conf "auth_server_shared_secret=$auth_secret_secondary" "$N"
-	}
-
-	[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
-	[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
-
-	[ -n "$dae_client" -a -n "$dae_secret" ] && {
-		append bss_conf "radius_das_port=$dae_port" "$N"
-		append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
-	}
-	json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
-
-	if [ -n "$ownip" ]; then
-		append bss_conf "own_ip_addr=$ownip" "$N"
-	elif [ "$dynamic_ownip" -gt 0 ]; then
-		append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
-	fi
-
-	[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
-	[ "$macfilter" = radius ] && append bss_conf "macaddr_acl=2" "$N"
+append_acct_server() {
+	[ -n "$1" ] || return
+	append bss_conf "acct_server_addr=$1" "$N"
+	append bss_conf "acct_server_port=$acct_port" "$N"
+	[ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 }
 
 hostapd_set_bss_options() {
@@ -662,7 +566,7 @@ hostapd_set_bss_options() {
 
 	wireless_vif_parse_encryption
 
-	local bss_conf bss_md5sum
+	local bss_conf bss_md5sum ft_key
 	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 
 	json_get_vars \
@@ -673,14 +577,13 @@ hostapd_set_bss_options() {
 		wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
 		macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
 		iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
-		acct_server acct_secret acct_port acct_interval \
-		acct_server_secondary acct_secret_secondary acct_port_secondary \
+		acct_secret acct_port acct_interval \
 		bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
+		vendor_elements fils ocv apup multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -697,7 +600,6 @@ hostapd_set_bss_options() {
 	set_default tdls_prohibit 0
 	set_default eapol_version $((wpa & 1))
 	set_default acct_port 1813
-	set_default acct_port_secondary 1813
 	set_default bss_load_update_period 60
 	set_default chan_util_avg_period 600
 	set_default utf8_ssid 1
@@ -706,7 +608,6 @@ hostapd_set_bss_options() {
 	set_default airtime_bss_weight 0
 	set_default airtime_bss_limit 0
 	set_default eap_server 0
-	set_default dynamic_probe_resp 0
 	set_default apup 0
 
 	/usr/sbin/hostapd -vfils || fils=0
@@ -733,7 +634,6 @@ hostapd_set_bss_options() {
 	append bss_conf "preamble=$short_preamble" "$N"
 	append bss_conf "wmm_enabled=$wmm" "$N"
 	append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
-	append bss_conf "dynamic_probe_resp=$dynamic_probe_resp" "$N"
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
@@ -750,22 +650,10 @@ hostapd_set_bss_options() {
 
 	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 
-	[ -n "$acct_server" ] && {
-		append bss_conf "acct_server_addr=$acct_server" "$N"
-		append bss_conf "acct_server_port=$acct_port" "$N"
-		[ -n "$acct_secret" ] && \
-			append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
-		[ -n "$acct_interval" ] && \
-			append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
-		json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
-	}
-
-	[ -n "$acct_server_secondary" ] && {
-		append bss_conf "acct_server_addr=$acct_server_secondary" "$N"
-		append bss_conf "acct_server_port=$acct_port_secondary" "$N"
-		[ -n "$acct_secret_secondary" ] && \
-			append bss_conf "acct_server_shared_secret=$acct_secret_secondary" "$N"
-	}
+	[ -n "$acct_interval" ] && \
+		append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+	json_for_each_item append_acct_server acct_server
+	json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
 
 	[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
 
@@ -775,7 +663,7 @@ hostapd_set_bss_options() {
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
-		psk-sae|psk2-radius|eap-eap2)
+		psk-sae|eap-eap2)
 			set_default ieee80211w 1
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
@@ -798,8 +686,6 @@ hostapd_set_bss_options() {
 			# Here we make the assumption that if we're in open mode
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
-			vlan_possible=1
-			append_radius_server
 		;;
 		psk|sae|psk-sae)
 			json_get_vars key wpa_psk_file
@@ -824,15 +710,74 @@ hostapd_set_bss_options() {
 			}
 			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
-			append_radius_server
 			set_default dynamic_vlan 0
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap192|eap-eap2|eap2)
-			append_radius_server
+		eap|eap2|eap-eap2|eap192)
+			json_get_vars \
+				auth_server auth_secret auth_port \
+				dae_client dae_secret dae_port \
+				dynamic_ownip ownip radius_client_addr \
+				eap_reauth_period request_cui \
+				erp_domain mobility_domain \
+				fils_realm fils_dhcp
+
 			# radius can provide VLAN ID for clients
 			vlan_possible=1
+
+			set_default dynamic_ownip 1
+
+			# legacy compatibility
+			[ -n "$auth_server" ] || json_get_var auth_server server
+			[ -n "$auth_port" ] || json_get_var auth_port port
+			[ -n "$auth_secret" ] || json_get_var auth_secret key
+
+			[ "$fils" -gt 0 ] && {
+				set_default erp_domain "$mobility_domain"
+				set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
+				set_default fils_realm "$erp_domain"
+
+				append bss_conf "erp_send_reauth_start=1" "$N"
+				append bss_conf "erp_domain=$erp_domain" "$N"
+				append bss_conf "fils_realm=$fils_realm" "$N"
+				append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
+
+				[ "$fils_dhcp" = "*" ] && {
+					json_get_values network network
+					fils_dhcp=
+					for net in $network; do
+						fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
+						[ -n "$fils_dhcp" ] && break
+					done
+
+					[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
+						fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
+				}
+				[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
+			}
+
+			set_default auth_port 1812
+			set_default dae_port 3799
+			set_default request_cui 0
+
+			[ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server
+			[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
+			[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
+
+			[ -n "$dae_client" -a -n "$dae_secret" ] && {
+				append bss_conf "radius_das_port=$dae_port" "$N"
+				append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
+			}
+			json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
+
+			if [ -n "$ownip" ]; then
+				append bss_conf "own_ip_addr=$ownip" "$N"
+			elif [ "$dynamic_ownip" -gt 0 ]; then
+				append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+			fi
+
+			[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 			append bss_conf "eapol_key_index_workaround=1" "$N"
 			append bss_conf "ieee8021x=1" "$N"
 
@@ -845,11 +790,6 @@ hostapd_set_bss_options() {
 			append bss_conf "wep_default_key=$wep_keyidx" "$N"
 			[ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 		;;
-		psk2-radius)
-			append bss_conf "wpa_psk_radius=3" "$N"
-			append_radius_server
-			vlan_possible=1
-		;;
 	esac
 
 	case "$auth_type" in
@@ -973,74 +913,9 @@ hostapd_set_bss_options() {
 		}
 	fi
 
+	json_get_vars ieee80211r
+	set_default ieee80211r 0
 	if [ "$wpa" -ge "1" ]; then
-		json_get_vars ieee80211r
-		set_default ieee80211r 0
-
-		if [ "$ieee80211r" -gt "0" ]; then
-			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline ft_l2_refresh
-
-			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
-			set_default ft_over_ds 1
-			set_default ft_l2_refresh 30
-			set_default reassociation_deadline 1000
-			skip_kh_setup=0
-
-			case "$auth_type" in
-				psk|psk-sae)
-					set_default ft_psk_generate_local 1
-					skip_kh_setup="$ft_psk_generate_local"
-				;;
-				*)
-					set_default ft_psk_generate_local 0
-				;;
-			esac
-
-			case "$auth_type" in
-				*sae*) skip_kh_setup=0;;
-			esac
-
-			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
-			append bss_conf "mobility_domain=$mobility_domain" "$N"
-			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
-			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
-			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
-			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
-
-			if [ "$skip_kh_setup" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
-				json_get_values r0kh r0kh
-				json_get_values r1kh r1kh
-
-				set_default r0_key_lifetime 10000
-				set_default pmk_r1_push 0
-
-				[ -n "$r0kh" -a -n "$r1kh" ] || {
-					if [ -z "$auth_secret" -a -z "$key" ]; then
-						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
-						return 1
-					fi
-					[ -z "$ft_key" ] && {
-						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
-
-						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
-						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
-					}
-				}
-
-				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
-				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
-				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
-				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
-
-				for kh in $r0kh; do
-					append bss_conf "r0kh=${kh//,/ }" "$N"
-				done
-				for kh in $r1kh; do
-					append bss_conf "r1kh=${kh//,/ }" "$N"
-				done
-			fi
-		fi
 		if [ "$fils" -gt 0 ]; then
 			json_get_vars fils_realm
 			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
@@ -1053,6 +928,60 @@ hostapd_set_bss_options() {
 	fi
 
 	if [ "$wpa" -ge "2" ]; then
+		if [ "$ieee80211r" -gt "0" ]; then
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+
+			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
+			set_default ft_over_ds 0
+			set_default reassociation_deadline 1000
+
+			case "$auth_type" in
+				psk)
+					set_default ft_psk_generate_local 1
+				;;
+				*)
+					set_default ft_psk_generate_local 0
+				;;
+			esac
+
+			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
+			append bss_conf "mobility_domain=$mobility_domain" "$N"
+			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
+			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
+			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+
+			if [ "$ft_psk_generate_local" -eq "0" ]; then
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+				json_get_values r0kh r0kh
+				json_get_values r1kh r1kh
+
+				set_default r0_key_lifetime 10000
+				set_default pmk_r1_push 0
+
+				[ -n "$r0kh" -a -n "$r1kh" ] || {
+					if [ -z "$auth_secret" -a -z "$key" ]; then
+						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
+						return 1
+					fi
+					ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
+
+					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
+					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
+				}
+
+				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
+				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
+				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
+
+				for kh in $r0kh; do
+					append bss_conf "r0kh=${kh//,/ }" "$N"
+				done
+				for kh in $r1kh; do
+					append bss_conf "r1kh=${kh//,/ }" "$N"
+				done
+			fi
+		fi
+
 		if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 			set_default auth_cache 1
 			append bss_conf "rsn_preauth=1" "$N"
@@ -1252,8 +1181,6 @@ hostapd_set_bss_options() {
 		append bss_conf "per_sta_vif=$per_sta_vif" "$N"
 	fi
 
-	[ -n "$uci_section" ] && append bss_conf "uci_section=$uci_section" "$N"
-
 	if [ "$apup" -gt 0 ]; then
 		append bss_conf "apup=$apup" "$N"
 

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,14 +7,11 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-sercomm,ap72tip-v4|\
 sercomm,ap72tip)
-	ucidef_set_led_default "power" "POWER" "blue:status" "on"
 	ucidef_set_led_netdev "wan_link" "wan_link" "green:phy" "eth0" "link"
 	ucidef_set_led_netdev "wan_act" "wan_act" "yellow:phy" "eth0" "rx tx"
 	;;
-sonicfi,rap7110c-341x|\
-sonicfi,rap750w-311a)
+sonicfi,rap7110c-341x)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
 esac

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -21,17 +21,6 @@ ipq53xx_setup_interfaces()
 	sonicfi,rap7110c-341x)
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
-	cig,wf189w)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan" "1:lan"
-		;;
-	cig,wf189h)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
-		;;
-	sercomm,ap72tip-v4)
-		ucidef_set_interface_wan "eth0"
-		;;	
 	esac
 }
 
@@ -39,8 +28,6 @@ qcom_setup_macs()
 {
         local board="$1"
         case $board in
-	cig,wf189w|\
-	cig,wf189h|\
         cig,wf189)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
 		[ -z "$mtd" ] && return;
@@ -55,30 +42,12 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
                 ;;
-        sercomm,ap72tip)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                lan_mac=$(cat /sys/class/net/eth1/address)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
-                ;;
         edgecore,eap105)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
-        sonicfi,rap7110c-341x)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
-                ;;
+        sonicfi,rap7110c-341x|\
         sonicfi,rap750w-311a)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                lan_mac=$(macaddr_add "$wan_mac" 1)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ;;
-        sercomm,ap72tip-v4)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -27,11 +27,8 @@ board=$(board_name)
 case "$FIRMWARE" in
 ath12k/IPQ5332/hw1.0/caldata.bin)
 	case "$board" in
-	cig,wf189w|\
-	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
@@ -47,7 +44,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;
@@ -59,23 +55,7 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 ath12k/QCN6432/hw1.0/caldata_1.bin)
 	case "$board" in
 	sonicfi,rap750w-311a)
-		caldata_extract "0:ART" 0x12800 0x18800
-		;;
-	esac
-	;;
-ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
-	case "$board" in
-	cig,wf189h|\
-	cig,wf189w)
-		caldata_extract "0:ART" 0x26800 0x20000
-		;;
-	esac
-	;;
-ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
-	case "$board" in
-	cig,wf189h|\
-	cig,wf189w)
-		caldata_extract "0:ART" 0x58800 0x20000
+		caldata_extract "0:ART" 0x26800 0x18800
 		;;
 	esac
 	;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/smp-affinity

@@ -3,75 +3,19 @@
 START=99
 
 boot() {
-	# For CE(assigned 2 core to copy engine)
-	# using 3 core will cause firmware crash due to bss channel survey timed out
-	i=0
-	cpu_mul=2
-	ce="ce"
-	ce1="ce_"
-	ce_name="$ce$i"
-	ce_name1="$ce1$i"
-	while [ $i -lt 15 ]
-	do
-		cpu=1
-		for irq_num in `grep -e "$ce_name" -e "$ce_name1" /proc/interrupts | cut -d ':' -f 1`
-		do
-			[ -n "$irq_num" ] && echo $cpu > /proc/irq/$irq_num/smp_affinity
-			cpu=$((cpu * cpu_mul))
-			if [ $cpu -gt 4 ] ; then cpu=1; fi
-		done
-	i=$((i+1))
-	ce_name="$ce$i"
-	ce_name1="$ce1$i"
+	for j in 68 69 70 71 75 88 92 96; do
+		echo 8 > /proc/irq/$j/smp_affinity
 	done
 
-	#For IPQ5332 2G radio
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2ost-exception' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-rx-release' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-status' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+	for j in 67 74 91 87; do
+		echo 4 > /proc/irq/$j/smp_affinity
+	done
 
-	# 5G and 6G radio
-	# pci0 and pci1 for Wkiki (two radio and one radio split mode)
-	# pcic1 and pcic2 are for Pebble
-	for j in pci0 pci1 pcic1 pcic2; do
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_4 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_5 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_6 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_7 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_0 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_1 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_2 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_11 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_3 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_8 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-        done
+	for j in 66 73 86 90 93; do
+		echo 2 > /proc/irq/$j/smp_affinity
+	done
+
+	for j in 65 72 85 89; do
+		echo 1 > /proc/irq/$j/smp_affinity
+	done
 }

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -86,8 +86,6 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
-	cig,wf189w|\
-	cig,wf189h|\
 	cig,wf189)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
@@ -120,9 +118,5 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	sercomm,ap72tip-v4|\
-	sercomm,ap72tip)
-		nand_upgrade_tar "$1"
-		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -23,10 +23,6 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
 	};
 
 	chosen {
@@ -44,11 +40,9 @@
 			uniphyaddr_fixup = <0xC90F014>;
 			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
 			tip,clk_div = <0xff>; /* MDIO Frequency reduction*/
-			limit_rtlphy_10g_ablity;
 
 			phy0: ethernet-phy@0 {
 				reg = <8>;
-				compatible ="ethernet-phy-ieee802.3-c45";
 			};
 
 			phy1: ethernet-phy@1 {
@@ -184,26 +178,13 @@
 			pinctrl-0 = <&gpio_leds_default>;
 			pinctrl-names = "default";
 
-		led_power_blue: led@26 {
-                        label = "status:blue";
-                        gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                	};
-
-                led_power_green:led@30 {
-                        label = "status:green";
-                        gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                };
-
-                led_power_red:led@45 {
-                        label = "status:red";
-                        gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                };
+			led-0 {
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WLAN;
+				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tx";
+				default-state = "off";
+			};
 		};
 
 		gpio_keys {
@@ -213,9 +194,9 @@
 			status = "okay";
 
 			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
@@ -481,7 +462,7 @@
 	};
 
 	button_pins: button-state {
-		pins = "gpio17";
+		pins = "gpio35";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -500,24 +481,6 @@
 		bias-pull-up;
 		output-low;
 	};
-
-	led_pins: led_pins {
-                mux_1 {
-                        pins = "gpio26";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-                mux_2 {
-                        pins = "gpio30";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-                mux_3 {
-                        pins = "gpio45";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-        };
 };
 
 &license_manager {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -1,777 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP446 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq5332.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "CIG WF189H";
-	compatible = "cig,wf189h", "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332-rdp446", "qcom,ipq5332";
-
-	/*     1G  Layout for IPQ5332 + QCN6432 + QCN6432
-	 * +==========+==============+========================+
-	 * |         |              |                         |
-	 * |  Region | Start Offset |          Size           |
-	 * |         |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * |   Q6    |              |                         |
-	 * |  code/  |  0x4A900000  |          25MB           |
-	 * |  data   |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  data   |  0x4C200000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * | M3 Dump |  0x4D700000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  QDSS   |  0x4D800000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  CALDB  |  0x4D900000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  data   |  0x4DE00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * | M3 Dump |  0x4F300000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  QDSS   |  0x4E400000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  CALDB  |  0x4F500000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  data   |  0x4FA00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * | M3 Dump |  0x50F00000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  QDSS   |  0x51000000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  CALDB  |  0x51100000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |         |              |                         |
-	 * |   MLO   |  0x51600000  |          12MB           |
-	 * +==================================================+
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * |             Rest of memory for Linux             |
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * +==================================================+
-	 */
-
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			reg = <0x0 0x4a900000 0x0 0x6D00000>;
-			no-map;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-			no-map;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			reg = <0x0 0x4C200000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump: m3_dump@4D700000 {
-			reg = <0x0 0x4D700000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_etr_region: q6_etr_dump@4D800000 {
-			reg = <0x0 0x4D800000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
-			reg = <0x0 0x4D900000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
-			reg = <0x0 0x4DE00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
-			reg = <0x0 0x4F500000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
-			reg = <0x0 0x4FA00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
-			reg = <0x0 0x50F00000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
-			reg = <0x0 0x51000000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
-			reg = <0x0 0x51100000 0x0 0x500000>;
-			no-map;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@51600000 {
-			reg = <0x0 0x51600000 0x0 0xC00000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &blsp1_uart0;
-		serial1 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins &mdio0_pins>;
-			pinctrl-names = "default";
-			/*gpio51 for manhattan reset*/
-      phy-reset-gpio = <&tlmm 22 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-				fixup;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-				fixup;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <3>;
-				fixup;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <4>;
-				fixup;
-			};
-
-			switch0@10 {
-				compatible = "qca,qca8386";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x10>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						label = "cpu";
-						ethernet = <&gmac2>;
-						dsa-tag-protocol = "qca_4b";
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan1";
-						phy-handle = <&phy0>;
-						phy-mode = "usxgmii";
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan2";
-						phy-handle = <&phy1>;
-						phy-mode = "usxgmii";
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan3";
-						phy-handle = <&phy2>;
-						phy-mode = "usxgmii";
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan4";
-						phy-handle = <&phy3>;
-						phy-mode = "usxgmii";
-					};
-
-					port@5 {
-						reg = <5>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					}; 
-				};
-			};
-		};
-
-		pwmleds {
-			compatible = "pwm-leds";
-
-			led_power_red: red {
-				label = "pwm:red";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_green: green {
-				label = "pwm:green";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_blue: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-
-			ess-switch@3a000000 {
-				pinctrl-names = "default";
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x2>; /* lan port bitmap */
-				switch_wan_bmp = <0x4>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <4>;
-					};
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca8386";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio>;
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
-				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-//				link-polling-required = <0>;
-				fdb_sync = "interrupt";
-				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <0>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <1>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <2>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <3>;
-						phy_address = <3>;
-					};
-				};
-
-				led_source@2 {
-					source = <2>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@5 {
-					source = <5>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@8 {
-					source = <8>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@11 {
-					source = <11>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-			phy-mode = "sgmii";
-		};
-
-		gmac2:dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <3>;
-			status = "okay";
-			chip_info = <0 2 1 2>,
-				    <1 2 2 0>,
-				    <2 2 0 1>;
-		};
-
-		q6v5_wcss: remoteproc@d100000 {
-			boot-args = <0x1 0x4 0x3 0x1 0x2f 0x2>,
-					<0x1 0x4 0x4 0x2 0x2c 0x2>;
-			memory-region = <&q6_mem_regions>,
-					<&mlo_global_mem0>;
-
-			/delete-node/ remoteproc_pd1;
-			/delete-node/ remoteproc_pd2;
-			/delete-node/ remoteproc_pd3;
-
-			q6_wcss_pd4: remoteproc_pd4 {
-				compatible = "qcom,ipq5332-mpd-upd-text";
-				firmware = "IPQ5332/q6_fw4.mdt";
-
-				q6_wcss_pd1: remoteproc_pd1 {
-					compatible = "qcom,ipq5332-wcss-ahb-mpd";
-					firmware = "IPQ5332/q6_fw1.mdt";
-					m3_firmware = "IPQ5332/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 8 0>,
-							<&wcss_smp2p_in 9 0>,
-							<&wcss_smp2p_in 12 0>,
-							<&wcss_smp2p_in 11 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 8>,
-							<&wcss_smp2p_out 9>,
-							<&wcss_smp2p_out 10>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-				};
-
-				q6_wcss_pd2: remoteproc_pd2 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw2.mdt";
-					m3_firmware = "qcn6432/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 16 0>,
-							<&wcss_smp2p_in 17 0>,
-							<&wcss_smp2p_in 20 0>,
-							<&wcss_smp2p_in 19 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 16>,
-							<&wcss_smp2p_out 17>,
-							<&wcss_smp2p_out 18>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-
-				q6_wcss_pd3: remoteproc_pd3 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw3.mdt";
-					interrupts-extended = <&wcss_smp2p_in 24 0>,
-							<&wcss_smp2p_in 25 0>,
-							<&wcss_smp2p_in 28 0>,
-							<&wcss_smp2p_in 27 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 24>,
-							<&wcss_smp2p_out 25>,
-							<&wcss_smp2p_out 26>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-			};
-		};
-	};
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&tlmm {
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	pwm_pins: pwm_pinmux {
-		/* PWM LED GREEN */
-		mux_1 {
-			pins = "gpio30";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED BLUE */
-		mux_2 {
-			pins = "gpio31";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED RED */
-		mux_3 {
-			pins = "gpio29";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux {
-		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-
-	button_pins: button-state {
-		pins = "gpio21";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	mdio1_pins: mdio1-state {
-		mux_0 {
-			pins = "gpio27";
-			function = "mdc1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio28";
-			function = "mdio1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&pwm {
-        pinctrl-0 = <&pwm_pins>;
-        used-pwm-indices = <1>, <1>, <0>, <1>;
-        pinctrl-names = "default";
-        status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&wifi0 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D900000 0x4D900000 0x4D900000 0x0 0x0 0x0>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x41>;
-	mem-region = <&q6_ipq5332_data>;
-	memory-region = <&q6_ipq5332_data>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	status = "okay";
-};
-
-&wifi1 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd2>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4DE00000 0x4DE00000 0x4DE00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4F500000 0x4F500000 0x4F500000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x20000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x061>;
-	mem-region = <&q6_qcn6432_data_1>;
-	memory-region = <&q6_qcn6432_data_1>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	status = "okay";
-	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};
-
-&wifi2 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd3>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4FA00000 0x4FA00000 0x4FA00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x51100000 0x51100000 0x51100000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x18000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x0b1>;
-	mem-region = <&q6_qcn6432_data_2>;
-	memory-region = <&q6_qcn6432_data_2>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <2>;
-	status = "okay";
-	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -1,777 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP446 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq5332.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "CIG WF189W";
-	compatible = "cig,wf189w", "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332-rdp446", "qcom,ipq5332";
-
-	/*     1G  Layout for IPQ5332 + QCN6432 + QCN6432
-	 * +==========+==============+========================+
-	 * |         |              |                         |
-	 * |  Region | Start Offset |          Size           |
-	 * |         |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * |   Q6    |              |                         |
-	 * |  code/  |  0x4A900000  |          25MB           |
-	 * |  data   |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  data   |  0x4C200000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * | M3 Dump |  0x4D700000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  QDSS   |  0x4D800000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  CALDB  |  0x4D900000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  data   |  0x4DE00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * | M3 Dump |  0x4F300000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  QDSS   |  0x4E400000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  CALDB  |  0x4F500000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  data   |  0x4FA00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * | M3 Dump |  0x50F00000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  QDSS   |  0x51000000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  CALDB  |  0x51100000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |         |              |                         |
-	 * |   MLO   |  0x51600000  |          12MB           |
-	 * +==================================================+
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * |             Rest of memory for Linux             |
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * +==================================================+
-	 */
-
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			reg = <0x0 0x4a900000 0x0 0x6D00000>;
-			no-map;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-			no-map;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			reg = <0x0 0x4C200000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump: m3_dump@4D700000 {
-			reg = <0x0 0x4D700000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_etr_region: q6_etr_dump@4D800000 {
-			reg = <0x0 0x4D800000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
-			reg = <0x0 0x4D900000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
-			reg = <0x0 0x4DE00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
-			reg = <0x0 0x4F500000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
-			reg = <0x0 0x4FA00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
-			reg = <0x0 0x50F00000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
-			reg = <0x0 0x51000000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
-			reg = <0x0 0x51100000 0x0 0x500000>;
-			no-map;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@51600000 {
-			reg = <0x0 0x51600000 0x0 0xC00000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &blsp1_uart0;
-		serial1 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins &mdio0_pins>;
-			pinctrl-names = "default";
-			/*gpio51 for manhattan reset*/
-      phy-reset-gpio = <&tlmm 22 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-				fixup;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-				fixup;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <3>;
-				fixup;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <4>;
-				fixup;
-			};
-
-			switch0@10 {
-				compatible = "qca,qca8386";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x10>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						label = "cpu";
-						ethernet = <&gmac2>;
-						dsa-tag-protocol = "qca_4b";
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan1";
-						phy-handle = <&phy0>;
-						phy-mode = "usxgmii";
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan2";
-						phy-handle = <&phy1>;
-						phy-mode = "usxgmii";
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan3";
-						phy-handle = <&phy2>;
-						phy-mode = "usxgmii";
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan4";
-						phy-handle = <&phy3>;
-						phy-mode = "usxgmii";
-					};
-
-					port@5 {
-						reg = <5>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					}; 
-				};
-			};
-		};
-
-		pwmleds {
-			compatible = "pwm-leds";
-
-			led_power_red: red {
-				label = "pwm:red";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_green: green {
-				label = "pwm:green";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_blue: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-
-			ess-switch@3a000000 {
-				pinctrl-names = "default";
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x2>; /* lan port bitmap */
-				switch_wan_bmp = <0x4>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <4>;
-					};
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca8386";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio>;
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
-				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-//				link-polling-required = <0>;
-				fdb_sync = "interrupt";
-				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <0>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <1>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <2>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <3>;
-						phy_address = <3>;
-					};
-				};
-
-				led_source@2 {
-					source = <2>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@5 {
-					source = <5>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@8 {
-					source = <8>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@11 {
-					source = <11>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-			phy-mode = "sgmii";
-		};
-
-		gmac2:dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <3>;
-			status = "okay";
-			chip_info = <0 2 1 2>,
-				    <1 2 2 0>,
-				    <2 2 0 1>;
-		};
-
-		q6v5_wcss: remoteproc@d100000 {
-			boot-args = <0x1 0x4 0x3 0x1 0x2f 0x2>,
-					<0x1 0x4 0x4 0x2 0x2c 0x2>;
-			memory-region = <&q6_mem_regions>,
-					<&mlo_global_mem0>;
-
-			/delete-node/ remoteproc_pd1;
-			/delete-node/ remoteproc_pd2;
-			/delete-node/ remoteproc_pd3;
-
-			q6_wcss_pd4: remoteproc_pd4 {
-				compatible = "qcom,ipq5332-mpd-upd-text";
-				firmware = "IPQ5332/q6_fw4.mdt";
-
-				q6_wcss_pd1: remoteproc_pd1 {
-					compatible = "qcom,ipq5332-wcss-ahb-mpd";
-					firmware = "IPQ5332/q6_fw1.mdt";
-					m3_firmware = "IPQ5332/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 8 0>,
-							<&wcss_smp2p_in 9 0>,
-							<&wcss_smp2p_in 12 0>,
-							<&wcss_smp2p_in 11 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 8>,
-							<&wcss_smp2p_out 9>,
-							<&wcss_smp2p_out 10>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-				};
-
-				q6_wcss_pd2: remoteproc_pd2 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw2.mdt";
-					m3_firmware = "qcn6432/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 16 0>,
-							<&wcss_smp2p_in 17 0>,
-							<&wcss_smp2p_in 20 0>,
-							<&wcss_smp2p_in 19 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 16>,
-							<&wcss_smp2p_out 17>,
-							<&wcss_smp2p_out 18>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-
-				q6_wcss_pd3: remoteproc_pd3 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw3.mdt";
-					interrupts-extended = <&wcss_smp2p_in 24 0>,
-							<&wcss_smp2p_in 25 0>,
-							<&wcss_smp2p_in 28 0>,
-							<&wcss_smp2p_in 27 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 24>,
-							<&wcss_smp2p_out 25>,
-							<&wcss_smp2p_out 26>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-			};
-		};
-	};
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&tlmm {
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	pwm_pins: pwm_pinmux {
-		/* PWM LED GREEN */
-		mux_1 {
-			pins = "gpio30";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED BLUE */
-		mux_2 {
-			pins = "gpio31";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED RED */
-		mux_3 {
-			pins = "gpio29";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux {
-		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-
-	button_pins: button-state {
-		pins = "gpio21";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	mdio1_pins: mdio1-state {
-		mux_0 {
-			pins = "gpio27";
-			function = "mdc1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio28";
-			function = "mdio1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&pwm {
-        pinctrl-0 = <&pwm_pins>;
-        used-pwm-indices = <1>, <1>, <0>, <1>;
-        pinctrl-names = "default";
-        status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&wifi0 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D900000 0x4D900000 0x4D900000 0x0 0x0 0x0>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x41>;
-	mem-region = <&q6_ipq5332_data>;
-	memory-region = <&q6_ipq5332_data>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	status = "okay";
-};
-
-&wifi1 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd2>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4DE00000 0x4DE00000 0x4DE00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4F500000 0x4F500000 0x4F500000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x20000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x061>;
-	mem-region = <&q6_qcn6432_data_1>;
-	memory-region = <&q6_qcn6432_data_1>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	status = "okay";
-	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};
-
-&wifi2 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd3>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4FA00000 0x4FA00000 0x4FA00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x51100000 0x51100000 0x51100000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x18000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x0b1>;
-	mem-region = <&q6_qcn6432_data_2>;
-	memory-region = <&q6_qcn6432_data_2>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <2>;
-	status = "okay";
-	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip-v4.dts

@@ -1,591 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Sercomm WiFi-7";
-	compatible = "sercomm,ap72tip-v4", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		serial1 = &blsp1_uart1; /*ble*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-	
-#if 0   //AQR114C
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-
-			phy1: ethernet-phy@1 {   //aqr114c
-				reg = <0>;
-				compatible ="ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 { //aqr114c
-						port_id = <2>;
-						phy_address = <0>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-		
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};	
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,phy-mdio-addr = <0>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-#else //SFP	
-		mdio:mdio@90000 { 
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio0 for napa*/
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			status = "okay";
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <30>;
-						media-type = "sfp"; 
-					};
-				};
-			};
-		};
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <30>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-#endif
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-                compatible = "gpio-leds";
-
-				led@25 {
-					label = "blue:status";
-					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
-                    default-state = "off";
-                };
-				led@61 {
-					label = "green:phy";
-					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
-				};
-				led@62 {
-					label = "yellow:phy";
-					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
-				};
-		};
-		
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_i2c2 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&blsp1_spi0 {   //nor flash
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11"; 
-		//, "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_spi1 {   /*tpm*/
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "okay";
-	
-	tpm: spi-tpm@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,st33htpm-spi";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		status = "okay";
-	};
-};
-
-&pcm {
-	pinctrl-0 = <&audio_pins_pri>;
-	pinctrl-names = "primary";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x100f>;  //0x1019->0x100f
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	audio_pins_pri: audio_pinmux_pri {
-		mux_1 {
-			pins = "gpio29";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio30";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio31";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio32";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_0_pins: i2c-0-state {
-		pins = "gpio43", "gpio45";
-		function = "blsp2_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_1_pins: spi-1-pins {  /* tpm */
-		pins = "gpio29", "gpio30", "gpio31", "gpio32";
-		function = "blsp1_spi0";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-/*	gpio_leds_default: gpio-leds-default-state {
-		pins = "gpio36";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-down;
-	};*/
-	
-	button_pins: button-state {
-		pins = "gpio1";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio47";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};
-
-//sercomm add
-&wifi3 {
-	/* QCN9224 5G+6G */
-	hremote_node = <&qcn9224_pcie1>;
-	qcom,board_id = <0x100f>; 
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip.dts

@@ -1,601 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Sercomm WiFi-7";
-	compatible = "sercomm,ap72tip", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		serial1 = &blsp1_uart1; /*ble*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-	
-#if 1   //AQR114C
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-
-			phy1: ethernet-phy@1 {   //aqr114c
-				reg = <0>;
-				compatible ="ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 { //aqr114c
-						port_id = <2>;
-						phy_address = <0>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-		
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};	
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,phy-mdio-addr = <0>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-#else //SFP	
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <30>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-		mdio:mdio@90000 { 
-			status = "okay";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio0 for napa*/
-			phy-reset-gpio = <&tlmm 0 0>;
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <30>;
-						media-type = "sfp"; 
-					};
-				};
-			};
-		};
-
-#endif
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-                compatible = "gpio-leds";
-
-				led@25 {
-					label = "blue:status";
-					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
-                    default-state = "off";
-                };
-				led@24 {
-					label = "red:status";
-					gpios = <&tca6416 10 GPIO_ACTIVE_HIGH>;
-				};
-				led_power: led@16 {
-                                label = "green:status";
-					gpios = <&tca6416 11 GPIO_ACTIVE_HIGH>;
-				};
-				led@61 {
-					label = "green:phy";
-					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
-				};
-				led@62 {
-					label = "yellow:phy";
-					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
-				};
-		};
-/*
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};*/
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_i2c2 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&blsp1_spi0 {   //nor flash
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11"; 
-		//, "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_spi1 {   /*tpm*/
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "okay";
-	
-	tpm: spi-tpm@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,st33htpm-spi";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		status = "okay";
-	};
-};
-
-&pcm {
-	pinctrl-0 = <&audio_pins_pri>;
-	pinctrl-names = "primary";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x100f>;  //0x1019->0x100f
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	audio_pins_pri: audio_pinmux_pri {
-		mux_1 {
-			pins = "gpio29";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio30";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio31";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio32";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_0_pins: i2c-0-state {
-		pins = "gpio43", "gpio45";
-		function = "blsp2_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_1_pins: spi-1-pins {  /* tpm */
-		pins = "gpio29", "gpio30", "gpio31", "gpio32";
-		function = "blsp1_spi0";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-/*	gpio_leds_default: gpio-leds-default-state {
-		pins = "gpio36";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-down;
-	};*/
-/*
-	button_pins: button-state {
-		pins = "gpio25";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};*/
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio47";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};
-
-//sercomm add
-&wifi3 {
-	/* QCN9224 5G+6G */
-	hremote_node = <&qcn9224_pcie1>;
-	qcom,board_id = <0x100f>; 
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750w-311a.dts

@@ -242,10 +242,6 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -328,6 +324,19 @@
 			};
 		};
 
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&gpio_leds_default>;
+			pinctrl-names = "default";
+
+			led-0 {
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WLAN;
+				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tx";
+				default-state = "off";
+			};
+		};
 
 		gpio_keys {
 			compatible = "gpio-keys";
@@ -336,39 +345,14 @@
 			status = "okay";
 
 			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
 		};
 
-		pwmleds {
-			compatible = "pwm-leds";
-
-			red {
-				label = "pwm:red";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		
-			green {
-				label = "pwm:green";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		
-			led_power: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		};
-
 		ess-instance {
 			num_devices = <0x2>;
 
@@ -427,6 +411,34 @@
 					};
 				};
 
+				led_source@2 {
+					source = <2>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@5 {
+					source = <5>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@8 {
+					source = <8>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@11 {
+					source = <11>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
 			};
 		};
 
@@ -537,7 +549,7 @@
 			memory-region = <&q6_mem_regions>;
 
 			q6_wcss_pd1: remoteproc_pd1 {
-				status = "okay";
+				status = "ok";
 			};
 
 			q6_wcss_pd2: remoteproc_pd2 {
@@ -558,7 +570,7 @@
 				qcom,smem-state-names = "shutdown",
 							"stop",
 							"spawn";
-				status = "okay";
+				status = "ok";
 			};
 		};
 	};
@@ -569,13 +581,13 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
-/*
+
 &blsp1_uart1 {
         pinctrl-0 = <&serial_1_pins>;
         pinctrl-names = "default";
         status = "disabled";
 };
-*/
+
 &blsp1_i2c1 {
 	clock-frequency  = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
@@ -652,50 +664,29 @@
 		};
 	};
 
-	pwm_pins: pwm_pinmux {
-			/* PWM LED GREEN */
-			mux_1 {
-				pins = "gpio43";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-			/* PWM LED BLUE */
-			mux_2 {
-				pins = "gpio45";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-			/* PWM LED RED */
-			mux_3 {
-				pins = "gpio44";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-	};
-/*
 	serial_1_pins: serial1-pinmux {
 		pins = "gpio33", "gpio34", "gpio35", "gpio36";
 		function = "blsp1_uart2";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-*/
+
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
 		function = "blsp1_i2c0";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-/*
+
 	gpio_leds_default: gpio-leds-default-state {
 		pins = "gpio36";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-down;
-	}; 
-*/
+	};
+
 	button_pins: button-state {
-		pins = "gpio24";
+		pins = "gpio35";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -734,13 +725,6 @@
 	status = "disabled";
 };
 
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	used-pwm-indices = <0>, <1>, <1>, <1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
 &hs_m31phy_0 {
 	status = "okay";
 };
@@ -763,7 +747,7 @@
 	memory-region = <&q6_ipq5332_data>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <0>;
-	status = "okay";
+	status = "ok";
 };
 
 &wifi1 {
@@ -784,7 +768,7 @@
 	memory-region = <&q6_qcn6432_data_1>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <1>;
-	status = "okay";
+	status = "ok";
 	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
 	interrupt-names = "umac_reset";
 };

feeds/qca-wifi-7/ipq53xx/dts/ipq5332.dtsi

@@ -736,36 +736,6 @@
 			status = "disabled";
 		};
 
-		blsp1_spi1: spi@78b6000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x078b6000 0x600>;
-			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
-			spi-max-frequency = <50000000>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-		
-		blsp1_i2c2: i2c@78b7000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x78b7000 0x600>;
-			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			clock-frequency  = <400000>;
-			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
 		blsp1_i2c1: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x600>;

feeds/qca-wifi-7/ipq53xx/files-6.1/drivers/net/phy/rtk/rtk_phy.c

@@ -7,7 +7,6 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
-#include <linux/of.h>
 
 #include "phy_rtl826xb_patch.h"
 #include "phy_rtl8251b_patch.h"
@@ -31,7 +30,6 @@ static int rtl8251_match_phy_device(struct phy_device *phydev)
 static int rtl826xb_get_features(struct phy_device *phydev)
 {
     int ret;
-    struct device_node *np;
     ret = genphy_c45_pma_read_abilities(phydev);
     if (ret)
         return ret;
@@ -50,14 +48,6 @@ static int rtl826xb_get_features(struct phy_device *phydev)
     linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
                        phydev->supported);
 
-    np = of_find_node_by_name(NULL, "mdio");
-    if (np)
-	if (of_property_read_bool(np, "limit_rtlphy_10g_ablity"))
-	{
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
-	}
-
-
     return 0;
 }
 
@@ -90,6 +80,7 @@ static int rtkphy_config_init(struct phy_device *phydev)
         case REALTEK_PHY_ID_RTL8261N:
         case REALTEK_PHY_ID_RTL8264B:
             phydev_info(phydev, "%s:%u [RTL8261N/RTL826XB] phy_id: 0x%X PHYAD:%d\n", __FUNCTION__, __LINE__, phydev->drv->phy_id, phydev->mdio.addr);
+	    phy_modify_mmd_changed(phydev, 7, 0x20, BIT(12), 0);
 
           #if 1 /* toggle reset */
             phy_modify_mmd_changed(phydev, 30, 0x145, BIT(0)  , 1);
@@ -222,6 +213,7 @@ static int rtkphy_c45_aneg_done(struct phy_device *phydev)
 static int rtkphy_c45_read_status(struct phy_device *phydev)
 {
     int ret = 0, status = 0;
+    uint16_t local;
     phydev->speed = SPEED_UNKNOWN;
     phydev->duplex = DUPLEX_UNKNOWN;
     phydev->pause = 0;
@@ -240,6 +232,9 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
         if (ret)
             return ret;
 	
+	phy_write_mmd(phydev, 7, 0x20, 0x181);
+	local = phy_read_mmd(phydev, 7, 0x20);
+
         status =  phy_read_mmd(phydev, 31, 0xA414);
         if (status < 0)
             return status;
@@ -247,6 +242,11 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
             phydev->lp_advertising, status & BIT(11));
 
         phy_resolve_aneg_linkmode(phydev);
+	if((phydev->speed == 10000) && (local == 0x181))
+        {
+                phydev->speed = 5000;
+                phydev->duplex = DUPLEX_FULL;
+        }
     }
     else
     {

feeds/qca-wifi-7/ipq53xx/generic/config-6.1-platform

@@ -2288,7 +2288,7 @@ CONFIG_GPIOLIB_FASTPATH_LIMIT=512
 # CONFIG_GPIO_ML_IOH is not set
 # CONFIG_GPIO_MOCKUP is not set
 # CONFIG_GPIO_MPC8XXX is not set
-CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCA9570 is not set
 # CONFIG_GPIO_PCF857X is not set

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -14,30 +14,16 @@ endef
 TARGET_DEVICES += cig_wf189
 
 define Device/sercomm_ap72tip
-  DEVICE_TITLE := Sercomm AP72TIP
+  DEVICE_TITLE := Sercomm AP72 TIP
   DEVICE_DTS := ipq5332-sercomm-ap72tip
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
+  DEVICE_DTS_CONFIG := config@mi01.2-qcn9160-c1
   IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
   DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
 endef
-TARGET_DEVICES += sercomm_ap72tip
-
-define Device/sercomm_ap72tip-v4
-  DEVICE_TITLE := Sercomm AP72TIP-v4
-  DEVICE_DTS := ipq5332-sercomm-ap72tip-v4
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip-v4 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
-endef
-TARGET_DEVICES += sercomm_ap72tip-v4
+#TARGET_DEVICES += sercomm_ap72tip
 
 define Device/edgecore_eap105
   DEVICE_TITLE := Edgecore EAP105
@@ -75,33 +61,6 @@ define Device/sonicfi_rap750w_311a
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb -ath12k-firmware-qcn92xx
+  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb
 endef
 TARGET_DEVICES += sonicfi_rap750w_311a
-
-define Device/cig_wf189w
-  DEVICE_TITLE := CIG WF189W
-  DEVICE_DTS := ipq5332-cig-wf189w
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi04.1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-cig-wf189w ath12k-firmware-ipq5332-peb-peb
-endef
-TARGET_DEVICES += cig_wf189w
-
-
-define Device/cig_wf189h
-  DEVICE_TITLE := CIG WF189H
-  DEVICE_DTS := ipq5332-cig-wf189h
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi04.1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-cig-wf189h ath12k-firmware-ipq5332-peb-peb
-endef
-TARGET_DEVICES += cig_wf189h

feeds/qca-wifi-7/qca-ssdk-qca/patches/0005-qca-ssdk-Fix-QCA8385-Maximum-support-for-4096-VLAN-s.patch

@@ -1,25 +0,0 @@
-From 41861d8524e61b1c350f00c67e0ca8534b73d033 Mon Sep 17 00:00:00 2001
-From: huangyunxiang <huangyunxiang@cigtech.com>
-Date: Wed, 9 Apr 2025 10:03:52 +0800
-Subject: [PATCH] qca-ssdk:Fix QCA8385 Maximum support for 4096 VLAN settings
-
----
- include/init/ssdk_plat.h                                    | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/init/ssdk_plat.h b/init/ssdk_plat.h
-index 414918a5bd..92596477af 100644
---- a/include/init/ssdk_plat.h
-+++ b/include/init/ssdk_plat.h
-@@ -174,7 +174,7 @@
- #define AR8327_NUM_PHYS                              5
- #define AR8327_PORT_CPU                              0
- #define AR8327_NUM_PORTS                             7
--#define AR8327_MAX_VLANS                             128
-+#define AR8327_MAX_VLANS                             4096
- 
- #define MII_PHYADDR_C45                              (1<<30)
- 
--- 
-2.34.1
-