ath12k-wifi: update NWA130BE BDF files

Signed-off-by: Jimmy Cheng <jimmy.cheng@zyxel.com.tw>

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -41,8 +41,10 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
+	emplus-wap380c \
 	emplus-wap385c \
 	emplus-wap386v2 \
+	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -56,6 +58,7 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
 	sonicfi-rap650c \
+	sonicfi-rap630e \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -406,8 +409,10 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
 $(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
 $(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -416,6 +421,7 @@ $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630e,SonicFi RAP630E))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -33,6 +33,11 @@ sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
         ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
+sonicfi,rap630e)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_default "power" "POWER" "green:power" "on"
+	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -68,6 +68,12 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
+	sonicfi,rap630e)
+		ucidef_set_interface_wan "eth1"
+		ucidef_set_interface_lan "eth0"
+	emplus,wap581)
+		ucidef_set_interface_wan "eth0 eth1"
+		;;
 	esac
 }
 
@@ -104,6 +110,16 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 2)
 		;;
+	sonicfi,rap630e)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		lan_mac=$(macaddr_canonicalize $mac)
+		wan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth1 $wan_mac
+		ucidef_set_network_device_mac eth0 $lan_mac
+		ip link set eth1 address $wan_mac
+		ip link set eth0 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -94,6 +94,15 @@ ath11k_generate_macs_gl_b3000() {
 	}
 }
 
+ath11k_generate_macs_rap630e() {
+	touch /lib/firmware/ath11k-macs
+	eth=$(cat /sys/class/net/eth0/address)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -122,6 +131,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -140,6 +150,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
+	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -152,6 +163,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
@@ -163,6 +175,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
+	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -178,6 +191,7 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 		;;
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	glinet,b3000)
@@ -213,6 +227,9 @@ ath11k-macs)
 	cybertan,eww631-b1)
 		ath11k_generate_macs_eww631_b1
 		;;
+	sonicfi,rap630e)
+		ath11k_generate_macs_rap630e
+		;;
 	edgecore,eap104|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -73,6 +73,7 @@ platform_check_image() {
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -91,6 +92,7 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
+	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -138,6 +140,7 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
+	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
@@ -149,7 +152,8 @@ platform_do_upgrade() {
 	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630w-312g)
+	sonicfi,rap630w-312g|\
+	sonicfi,rap630e)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
 			echo "Current bootfrom is $boot_part"
 			if [[ $boot_part == 1 ]]; then

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -450,6 +450,8 @@ CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_SAMA5D2_PIOBU is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_USB_DETECT is not set
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 # CONFIG_GSI is not set
 # CONFIG_HABANA_AI is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts

@@ -0,0 +1,831 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP581";
+	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <&tlmm 0x27 0>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x3e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+					port@4 {
+						port_id = <5>;
+						phy_address = <4>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+				led@28 {
+					label = "led_blue";
+					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@38 {
+					label = "led_red";
+					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@46 {
+					label = "led_green";
+					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+		};
+
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};		
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red { /* POWER_LED */
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green { /* 2G_LED */
+			pins = "gpio46";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,rproc = <&q6_wcss_pd1>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x23>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+&pcie_x2 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+	status = "disabled";	
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts

@@ -0,0 +1,893 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Sonicfi RAP630E";
+	compatible = "sonicfi,rap630e", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E000000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E200000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4EF00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F000000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D300000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D500000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E400000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E900000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4F800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4E900000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
+			no-map;
+			reg = <0x0 0x4F600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
+			no-map;
+			reg = <0x0 0x4F700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
+			no-map;
+			reg = <0x0 0x4F800000 0x0 0x500000>;
+		};
+		ramoops: ramoops@50400000 {
+			compatible = "ramoops";
+			reg = <0x0 0x50400000 0x0 0x80000>; // 512KB
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			no-map;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+		};
+
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	audio_pins: audio_pinmux {
+	};
+
+	leds_pins: leds_pins {
+			led_5g {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_2g {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_sys {
+					pins = "gpio26";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_onekey {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+			};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+	leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led34 {
+				label = "green:wifi5";
+				gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led33 {
+				label = "green:wifi2";
+				gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led_power: led26 {
+				label = "green:power";
+				gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led@28 {
+				label = "led_onekey";
+				gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "led_onekey";
+				default-state = "off";
+			};
+		};
+
+		gpio-watchdog {
+			compatible = "linux,wdt-gpio";
+            gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+			hw_algo = "toggle";
+			hw_margin_ms = <5000>;
+			start-at-boot;
+			always-running;
+			status = "okay";
+		};
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	nss-radio-priority = <0>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
+	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	nss-radio-priority = <1>;
+	status = "ok";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+	nss-radio-priority = <1>;
+#endif
+	mem-region = <&q6_qcn6122_data2>;
+	qcom,caldb-size = <0x500000>;
+	status = "disabled";
+};
+
+&dwc_0 {
+       /delete-property/ #phy-cells;
+       /delete-property/ phys;
+       /delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+       status = "ok";
+};
+
+&eud {
+	status = "disabled";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -73,6 +73,17 @@ define Device/sonicfi_rap630w_311g
 endef
 TARGET_DEVICES += sonicfi_rap630w_311g
 
+define Device/sonicfi_rap630e
+  DEVICE_TITLE := Sonicfi RAP630E
+  DEVICE_DTS := qcom-ipq5018-rap630e
+  SUPPORTED_DEVICES := sonicfi,rap630e
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630e ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap630e
+
 define Device/edgecore_eap104
   DEVICE_TITLE := EdgeCore EAP104
   DEVICE_DTS := qcom-ipq5018-eap104
@@ -228,3 +239,16 @@ define Device/glinet_b3000
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
+
+define Device/emplus_wap581
+  DEVICE_TITLE := Emplus WAP581
+  DEVICE_DTS := qcom-ipq5018-emplus-wap581
+  SUPPORTED_DEVICES := emplus,wap581
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+  IMAGES := sysupgrade.tar nand-factory.bin
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
+endef
+TARGET_DEVICES += emplus_wap581
+

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -20,6 +20,12 @@ edgecore,oap103)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
+emplus,wap380c)
+	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
+	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
+	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
+	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
+	;;
 sonicfi,rap630w-311g|\
 sonicfi,rap650c|\
 cybertan,eww631-b1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -12,6 +12,7 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"
 
 	case $board in
+	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -72,6 +72,7 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
+	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,6 +29,7 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	emplus,wap380c|\
 	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
@@ -48,7 +49,8 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-        cig,wf196)
+	cig,wf196|\
+	emplus,wap380c)
                 [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                         CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                         CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts

@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP380C";
+	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
+	qcom,msm-id = <0x143 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp6";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		qti: ledc@191E000  {
+			compatible = "qti,ledc";
+			reg = <0x191E000 0x20070>;
+			reg-names = "ledc_base_addr";
+			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
+									0x00000000 0x00000000 \
+									0x00000000 0xFFFFFFFF \
+									0xFFFF7FFF 0xFFFFFFFF \
+									0x007D0820 0x00000000 \
+									0x10482094 0x03FFFFE1>;
+			qti,ledc_blink_indices_cnt = <6>;
+			qti,ledc_blink_indices = <15 14 13 12 11 10>;
+			qti,ledc_blink_idx_src_pair = <5 20>;
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio52";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			ledc_pins: ledc_pinmux {
+				led_clk {
+					pins = "gpio18";
+					function = "led0";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_data {
+					pins = "gpio19";
+					function = "led1";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_clr {
+					pins = "gpio20";
+					function = "led2";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <4>;
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		dp6 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&apc_cpr {
+	/* Same CPR configuration as OAK */
+	compatible = "qcom,cpr4-ipq817x-apss-regulator";
+
+	thread@0 {
+		apc_vreg: regulator {
+			regulator-min-microvolt = <1>;
+			regulator-max-microvolt = <2>;
+			qcom,cpr-fuse-corners = <2>;
+			qcom,cpr-corners = <3>;
+			qcom,cpr-speed-bin-corners = <3>;
+			qcom,cpr-corner-fmax-map = <1 3>;
+
+			qcom,cpr-voltage-ceiling =
+				<840000 904000 944000>;
+			qcom,cpr-voltage-floor =
+				<592000 648000 712000>;
+			qcom,corner-frequencies =
+				<1017600000 1382400000 1382400000>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				< 20000  26000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0   7000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-floor-to-ceiling-max-range =
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>;
+		};
+	};
+};
+
+&npu_cpr {
+	status = "disabled";
+};
+
+&nss0 {
+	qcom,low-frequency = <187200000>;
+	qcom,mid-frequency = <748800000>;
+	qcom,max-frequency = <1497600000>;
+};
+
+&nss0 {
+	npu-supply = <&dummy_reg>;
+	mx-supply = <&dummy_reg>;
+};
+
+&wifi0 {
+	qcom,board_id = <0x92>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};
+
+&ledc {
+	pinctrl-0 = <&ledc_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+
+	led_power: led0 {
+		label = "ipq::led0";
+		linux,default-trigger = "default-on";
+	};
+
+	wan: led1 {
+		label = "ipq::led1";
+		linux,default-trigger = "netdev";
+	};
+
+	wifi2g: led2 {
+		label = "ipq::led2";
+		linux,default-trigger = "phy1tpt";
+	};
+
+	wifi5g: led3 {
+		label = "ipq::led3";
+		linux,default-trigger = "phy0tpt";
+	};
+
+	led4 {
+		label = "ipq::led4";
+		linux,default-trigger = "none";
+	};
+
+	led5 {
+		label = "ipq::led5";
+		linux,default-trigger = "none";
+	};
+};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,6 +57,15 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
+define Device/emplus_wap380c
+  DEVICE_TITLE := Emplus WAP380C
+  DEVICE_DTS := qcom-ipq807x-wap380c
+  DEVICE_DTS_CONFIG=config@hk07
+  SUPPORTED_DEVICES := emplus,wap380c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
+endef
+TARGET_DEVICES += emplus_wap380c
+
 define Device/sonicfi_rap650c
   DEVICE_TITLE := SonicFi RAP650C
   DEVICE_DTS := qcom-ipq807x-rap650c

feeds/morse/netifd-morse/lib/netifd/wireless/morse.sh

@@ -832,6 +832,13 @@ morse_hostapd_add_bss(){
 	morse_override_hostapd_set_bss_options hostapd_cfg "$_phy" "$vif" || return 1
 	json_get_vars wds wds_bridge sae_pwe dtim_period max_listen_int start_disabled
 
+	local network_config network_values
+	json_get_values network_values network
+	network_config=$(echo "$network_values" | cut -d' ' -f1)
+
+	if [ "$wds" -gt 0 ] && [ -z "$wds_bridge" ]; then
+		wds_bridge="${network_config%%[0-9]*}"
+	fi
 
 	raw_block=
 	json_for_each_item morse_hostapd_add_raw raws

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa130be-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
+                ],
+                "data": "nwa130be-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa130be-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=4121"
+                ],
+                "data": "nwa130be-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=4121"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -15,3 +15,6 @@ $encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
 
 $encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
 $encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX
+
+$encoder -c board-2-nwa130be-IPQ5332.json -o board-2.bin.nwa130be.IPQ5332
+$encoder -c board-2-nwa130be-QCN92XX.json -o board-2.bin.nwa130be.QCN92XX

feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile

@@ -0,0 +1,29 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=cig-device-boot
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/cig-device-boot
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+kmod-usb-serial-xr
+  TITLE:=CIG device init
+endef
+
+define Package/cig-device-boot/description
+  Initialize particular functions of the CIG device
+endef
+
+define Build/Compile
+
+endef
+
+define Package/cig-device-boot/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/cig-device.init $(1)/etc/init.d/cig-device-boot
+endef
+
+$(eval $(call BuildPackage,cig-device-boot))

feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init

@@ -0,0 +1,7 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot(){
+    [ -e /dev/ttyUSB0 ] && stty -F /dev/ttyUSB0 115200 cs8 -cstopb -parenb -icrnl -onlcr
+}

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/Makefile

@@ -0,0 +1,25 @@
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=cig-poe-judgment
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/cig-poe-judgment
+  SUBMENU:=Other modules
+  TITLE:=CIG POE judgment
+  FILES:=$(PKG_BUILD_DIR)/cig_poe_judgment.ko
+  AUTOLOAD:=$(call AutoLoad,99,cig_poe_judgment)
+endef
+
+define KernelPackage/cig-poe-judgment/description
+  Find POE type
+endef
+
+define Build/Compile
+	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
+endef
+
+$(eval $(call KernelPackage,cig-poe-judgment))

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/Makefile

@@ -0,0 +1 @@
+obj-m += cig_poe_judgment.o

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/cig_poe_judgment.c

@@ -0,0 +1,252 @@
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/proc_fs.h>
+#include <linux/kthread.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/irqreturn.h>
+#include <linux/of_gpio.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/uaccess.h>
+
+#define GPIO_MAX 		8 
+#define INT_MODE_MASK 		0xf0
+#define DETECT_MODE1	 	0x3
+#define DETECT_MODE2	 	0x4
+
+enum POE_TYPE {
+	POE_TYPE_AT = 1,
+	POE_TYPE_AF,
+	POE_TYPE_BT,
+	POE_TYPE_DC,
+	POE_TYPE_MAX
+};
+
+struct poe_irq_data
+{
+	struct device *dev;
+	int irq;
+	struct tasklet_struct tasklet;
+	int poe_type;
+};
+
+static void  *poe_gpio_base;
+static void  *pse_gpio_base;
+struct poe_irq_data *data = NULL;
+u32 mode;
+
+static const struct of_device_id my_of_ids[] = {
+	{.compatible = "poe-judge"},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of,my_of_ids);
+
+static int poe_info_proc_show(struct seq_file *m, void *v)
+{
+	const char *type_str = "invalid";
+
+	switch (data->poe_type) {
+		case POE_TYPE_AT: 
+			type_str = "AT"; 
+			break;
+		case POE_TYPE_AF: 
+			type_str = "AF"; 
+			break;
+		case POE_TYPE_BT: 
+			type_str = "BT"; 
+			break;
+		case POE_TYPE_DC: 
+			type_str = "DC"; 
+			break;
+	}
+
+	seq_printf(m, "%s\n", type_str);
+
+	return 0;
+}
+
+static void poe_tasklet_func(unsigned long data)
+{
+	struct poe_irq_data *irq_data = (struct poe_irq_data *)data;
+
+	writel(0x3, pse_gpio_base+4);
+	irq_data->poe_type = POE_TYPE_BT;
+
+	return;
+}
+
+static irqreturn_t gpio_key1_irq_handler(int irq, void *dev_id)
+{
+	struct poe_irq_data *data = (struct poe_irq_data *)dev_id;
+
+	disable_irq_nosync(data->irq);
+	tasklet_schedule(&data->tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static int poe_info_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, poe_info_proc_show, NULL);
+}
+
+static const struct proc_ops poe_info_proc_fops = {
+	.proc_open = poe_info_proc_open,
+	.proc_read = seq_read,
+	.proc_lseek = seq_lseek,
+	.proc_release = single_release,
+};
+
+static int gpio_key_probe(struct platform_device *dev)
+{
+	int ret = 0;
+	int irq = (-1);
+	int val = 0;
+	int gpio_id = 0;
+	int gpio[GPIO_MAX] = {0}, gpio_val[GPIO_MAX] = {0};
+	int num;
+	char name[16];
+	struct device_node *np = dev->dev.of_node;
+
+	if (of_property_read_u32(np, "detect-mode", &mode)) {
+		pr_err("Failed to read detect mode\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(&dev->dev, sizeof(struct poe_irq_data), GFP_KERNEL);
+	if (!data)
+	{
+		return -ENOMEM;
+	}
+
+	if (mode & INT_MODE_MASK) {
+		poe_gpio_base = ioremap(0x1017004, 8);
+		pse_gpio_base = ioremap(0x1026000, 8);
+
+		writel(0x2c1, pse_gpio_base);
+		writel(0x0, pse_gpio_base+4);
+
+
+		data->dev = &dev->dev;
+		dev_set_drvdata(&dev->dev, data);
+
+		gpio_id = of_get_named_gpio(dev->dev.of_node, "detect_gpio", 0);
+		if (gpio_id < 0)
+		{
+			return -EINVAL;
+		}
+
+		tasklet_init(&data->tasklet, poe_tasklet_func, (unsigned long)data);
+
+		ret = devm_gpio_request_one(&dev->dev, gpio_id, GPIOF_IN, "poe_judge");
+		if(ret)
+		{
+			pr_err("GPIO23 request failed, ret:%d\n", ret);
+			return ret;
+		}
+
+		val = readl(poe_gpio_base);
+		if(val == 1)
+		{
+			pr_info("poe type is af or bt,close pse first\n");
+			data->poe_type = POE_TYPE_AF;
+		}
+		else
+		{
+			data->poe_type = POE_TYPE_AT;
+		}
+
+		irq = gpio_to_irq(gpio_id);
+		data->irq = irq;
+
+		ret = devm_request_any_context_irq(&dev->dev, data->irq, 
+				gpio_key1_irq_handler, 
+				IRQF_TRIGGER_FALLING, 
+				"poe_judge", data);
+		if (ret)
+		{
+			pr_err("Request irq fail %d\n", ret);
+			return ret;
+		}
+	} else {
+		if (mode == DETECT_MODE1 || mode == DETECT_MODE2) {
+			num = 3;
+		} else {
+			pr_err("Wrong poe detect mode\n");
+			return -ENOMEM;
+		}
+
+		for (int i = 0; i < num; i++) {
+			sprintf(name, "detect-gpio%d", i+1);
+			gpio[i] = of_get_named_gpio(np, name, 0); 	
+			ret = gpio_request(gpio[i], name);
+			if (ret) {
+				pr_err("Can not request gpio %d\n", i+1);
+				return ret;
+			}
+			gpio_direction_input(gpio[i]);
+			gpio_val[i] = gpio_get_value_cansleep(gpio[i]);
+		}
+		
+		if (mode == DETECT_MODE1){
+			if (gpio_val[0] > 0) {
+				data->poe_type = POE_TYPE_DC;
+			} else if (gpio_val[1] > 0){
+				if (gpio_val[2] == 0) {
+					data->poe_type = POE_TYPE_AT;
+				} else {
+					data->poe_type = POE_TYPE_AF;
+				}
+			}
+		}else if (mode == DETECT_MODE2){
+			switch (gpio_val[0] | (gpio_val[1] << 1) | (gpio_val[2] << 2)) {
+				case 3:
+					data->poe_type = POE_TYPE_AT;
+					break;
+				case 4:
+					data->poe_type = POE_TYPE_BT;
+					break;
+				case 7:
+					data->poe_type = POE_TYPE_AF;
+					break;
+			}
+		}
+
+	}
+
+	if (!proc_create("poe_info", 0444, NULL, &poe_info_proc_fops)) {
+		pr_err("Failed to create proc entry for poe_info\n");
+		return -ENOMEM;
+	}
+
+	return ret;
+}
+
+static int gpio_key_remove(struct platform_device *dev)
+{
+	remove_proc_entry("poe_info", NULL);
+
+	return 0;
+}
+
+static struct platform_driver poe_judge_driver =
+{
+	.driver = {
+		.name = "poe_judge",
+		.of_match_table = my_of_ids,
+		.owner = THIS_MODULE,
+	},
+	.probe = gpio_key_probe,
+	.remove = gpio_key_remove,
+};
+
+module_platform_driver(poe_judge_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Poe type judgment driver");
+MODULE_AUTHOR("huangyunxiang<huangyunxiang@cigtech.com>");

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_sw

@@ -3,9 +3,9 @@
 band=$1
 if [ $band -eq 2 ] || [ $band -eq 3 ]; then
 	echo $band > /proc/rf_switch
-	echo "reboot for switch wifi mode 2/3 bands"
+	echo "firstboot for switch wifi mode 2/3 bands"
 	sleep 1
-	reboot
+	firstboot -y -r
 else
 	echo "error band param"
 fi

feeds/qca-wifi-7/hostapd/patches/zzz-socket-read-buffer-size.patch

@@ -0,0 +1,11 @@
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -127,7 +127,7 @@ static void nl80211_register_eloop_read(
+ 	 */
+ 	int err;
+ 
+-	err = nl_socket_set_buffer_size(*handle, 262144, 0);
++	err = nl_socket_set_buffer_size(*handle, 1048576, 0);
+ 	if (err < 0) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "nl80211: Could not set nl_socket RX buffer size: %s",

feeds/qca-wifi-7/ipq53xx/config-6.1

@@ -1225,3 +1225,4 @@ CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_RAM=y
 # CONFIG_RTL8221D_PHY is not set
 # CONFIG_INPUT_LSM303AGR is not set
+# CONFIG_USB_SERIAL_XR is not set

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -236,6 +236,15 @@
 			};
 		};
 
+		poe {
+			compatible = "poe-judge";
+			detect-mode = <0x3>;
+			detect-gpio1 = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+			detect-gpio2 = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+			detect-gpio3 = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+			status = "ok";
+                };
+
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -85,6 +85,15 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
+        ramoops@49c00000 {
+            compatible = "ramoops";
+            no-map;
+            reg = <0x0 0x49c00000 0x0 0x50000>;
+            record-size = <0x20000>;
+            console-size = <0x8000>;
+            pmsg-size = <0x8000>;
+        };
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 			reg = <0x0 0x4a900000 0x0 0x6D00000>;
 			no-map;
@@ -298,6 +307,13 @@
 			};
 		};
 
+		poe {
+                        compatible = "poe-judge";
+			detect-mode = <0x11>;
+                        detect_gpio = <&tlmm 0x17 0>;
+                        status = "ok";
+                };
+
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -85,6 +85,15 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
+        ramoops@49c00000 {
+            compatible = "ramoops";
+            no-map;
+            reg = <0x0 0x49c00000 0x0 0x50000>;
+            record-size = <0x20000>;
+            console-size = <0x8000>;
+            pmsg-size = <0x8000>;
+        };
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 			reg = <0x0 0x4a900000 0x0 0x6D00000>;
 			no-map;
@@ -298,6 +307,13 @@
 			};
 		};
 
+		poe {
+                        compatible = "poe-judge";
+			detect-mode = <0x11>;
+                        detect_gpio = <&tlmm 0x17 0>;
+                        status = "ok";
+                };
+
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts

@@ -18,6 +18,21 @@
 	model = "CIG WF672";
 	compatible = "cig,wf672", "qcom,ipq5332-rdp468", "qcom,ipq5332";
 
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+       ramoops@49c00000 {
+           compatible = "ramoops";
+           no-map;
+           reg = <0x0 0x49c00000 0x0 0x50000>;
+           record-size = <0x20000>;
+           console-size = <0x8000>;
+           pmsg-size = <0x8000>;
+       };
+    };
+
 	aliases {
 		serial0 = &blsp1_uart0;
 		serial1 = &blsp1_uart1;
@@ -59,6 +74,8 @@
 			num_devices = <0x1>;
 
 			ess-switch@3a000000 {
+				pinctrl-0 = <&sfp_pins>;
+				pinctrl-names = "default";
 				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
@@ -234,6 +251,15 @@
 			};
 		};
 
+		poe {
+			compatible = "poe-judge";
+			detect-mode = <0x4>;
+			detect-gpio1 = <&extgpio 0 0>;
+			detect-gpio2 = <&extgpio 1 0>;
+			detect-gpio3 = <&extgpio 2 0>;
+			status = "ok";
+                };
+
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;
@@ -275,7 +301,7 @@
 
 &blsp1_i2c1 {
 	status = "okay";
-	clock-frequency  = <400000>;
+	clock-frequency  = <100000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	extgpio:pca9555@20{
@@ -433,6 +459,13 @@
                 };
 	};
 
+	sfp_pins: sfp-state {
+		pins = "gpio43";
+		function = "gpio";
+		bias-pull-up;
+		input-enable;
+	};
+
 	spi_0_data_clk_pins: spi-0-data-clk-state {
 		pins = "gpio14", "gpio15", "gpio16";
 		function = "blsp0_spi";
@@ -538,7 +571,6 @@
 	pinctrl-0 = <&pwm_pins>;
 	pinctrl-names = "default";
 	dft-pwm-status = <0>, <0>, <1>, <0>;
-        poe_type_pin = <&extgpio 0 0 &extgpio 1 0 &extgpio 2 0>;
 	status = "okay";
 };
 

feeds/qca-wifi-7/mac80211/patches-cig_wf189h/ath12k/993-CIG-add-thermal-and-antenna-control.patch

@@ -0,0 +1,181 @@
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
+--- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
++++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
+@@ -10451,6 +10451,30 @@
+ 	return 0;
+ }
+ 
++int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
++{
++    int ret;
++    
++    if (!tx_ant || !rx_ant) {
++        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
++        return -EINVAL;
++    }
++
++    /* return if it is no changed */
++    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
++        return 0;
++
++    mutex_lock(&ar->conf_mutex);
++    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
++    if (!ret) {
++        ar->cfg_tx_chainmask = tx_ant;
++        ar->cfg_rx_chainmask = rx_ant;
++    }
++    mutex_unlock(&ar->conf_mutex);
++
++    return ret;
++}
++
+ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
+ {
+ 	int num_mgmt = 0;
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
+--- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
++++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
+@@ -168,6 +168,7 @@
+ 
+ extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
+ 
++int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
+ void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
+ void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
+ void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
+--- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
++++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
+@@ -401,8 +401,25 @@
+ 	complete(&ar->thermal.wmi_sync);
+ }
+ 
++static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
++    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
++    struct ath12k *ar = thermal_work->ar;
++    int ret;
++
++    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
++    if (ret) {
++        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
++                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
++    }
++    kfree(thermal_work);
++}
++
+ void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
+ {
++	int temp = ar->thermal.temperature;
++    	u32 tx_mask, rx_mask;
++    	bool need_switch = false;
++
+ 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
+ 	    curr_level >= ENHANCED_THERMAL_LEVELS)
+ 		return;
+@@ -416,7 +433,37 @@
+ 	else
+ 		ar->thermal.throttle_state =
+ 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
+-	spin_unlock_bh(&ar->data_lock);
++	
++	/* configure ant mode */
++	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
++        	tx_mask = 0x1;
++        	rx_mask = 0x1;
++        	need_switch = true;
++    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
++        	tx_mask = ar->thermal.default_tx_chainmask;
++        	rx_mask = ar->thermal.default_rx_chainmask;
++        	need_switch = true;
++    	}
++
++    	spin_unlock_bh(&ar->data_lock);
++
++    /* set param async*/ 
++    if (need_switch) {
++        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
++        if (work) {
++            work->ar = ar;
++            work->tx_mask = tx_mask;
++            work->rx_mask = rx_mask;
++            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
++            schedule_work(&work->work);
++            
++            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
++                       ar->pdev_idx, temp,
++                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
++                       (tx_mask > 0x1) ? "dual" : "single",
++                       curr_level);
++        }
++    }
+ }
+ 
+ static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
+@@ -459,6 +506,11 @@
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
+ 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
++
++                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
++                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
++                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
++                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
+ 		}
+ 	} else {
+ 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
+@@ -494,6 +546,10 @@
+ 	for (i = 0; i < ab->num_radios; i++) {
+ 		pdev = &ab->pdevs[i];
+ 		ar = pdev->ar;
++
++		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
++        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
++
+ 		if (!ar)
+ 			continue;
+ 
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+--- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
++++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
+@@ -22,15 +22,15 @@
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
++#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
++#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
++#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
++#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+ #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+@@ -83,6 +83,16 @@
+ 	 * protected by data_lock
+ 	 */
+ 	int temperature;
++
++	u32 default_tx_chainmask;
++    	u32 default_rx_chainmask;
++};
++
++struct ath12k_thermal_work {
++    struct work_struct work;
++    struct ath12k *ar;
++    u32 tx_mask;
++    u32 rx_mask;
+ };
+ 
+ #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION

feeds/qca-wifi-7/mac80211/patches-cig_wf189w/ath12k/993-CIG-add-thermal-and-antenna-control.patch

@@ -0,0 +1,181 @@
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
+--- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
++++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
+@@ -10451,6 +10451,30 @@
+ 	return 0;
+ }
+ 
++int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
++{
++    int ret;
++    
++    if (!tx_ant || !rx_ant) {
++        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
++        return -EINVAL;
++    }
++
++    /* return if it is no changed */
++    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
++        return 0;
++
++    mutex_lock(&ar->conf_mutex);
++    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
++    if (!ret) {
++        ar->cfg_tx_chainmask = tx_ant;
++        ar->cfg_rx_chainmask = rx_ant;
++    }
++    mutex_unlock(&ar->conf_mutex);
++
++    return ret;
++}
++
+ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
+ {
+ 	int num_mgmt = 0;
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
+--- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
++++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
+@@ -168,6 +168,7 @@
+ 
+ extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
+ 
++int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
+ void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
+ void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
+ void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
+--- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
++++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
+@@ -401,8 +401,25 @@
+ 	complete(&ar->thermal.wmi_sync);
+ }
+ 
++static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
++    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
++    struct ath12k *ar = thermal_work->ar;
++    int ret;
++
++    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
++    if (ret) {
++        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
++                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
++    }
++    kfree(thermal_work);
++}
++
+ void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
+ {
++	int temp = ar->thermal.temperature;
++    	u32 tx_mask, rx_mask;
++    	bool need_switch = false;
++
+ 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
+ 	    curr_level >= ENHANCED_THERMAL_LEVELS)
+ 		return;
+@@ -416,7 +433,37 @@
+ 	else
+ 		ar->thermal.throttle_state =
+ 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
+-	spin_unlock_bh(&ar->data_lock);
++	
++	/* configure ant mode */
++	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
++        	tx_mask = 0x1;
++        	rx_mask = 0x1;
++        	need_switch = true;
++    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
++        	tx_mask = ar->thermal.default_tx_chainmask;
++        	rx_mask = ar->thermal.default_rx_chainmask;
++        	need_switch = true;
++    	}
++
++    	spin_unlock_bh(&ar->data_lock);
++
++    /* set param async*/ 
++    if (need_switch) {
++        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
++        if (work) {
++            work->ar = ar;
++            work->tx_mask = tx_mask;
++            work->rx_mask = rx_mask;
++            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
++            schedule_work(&work->work);
++            
++            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
++                       ar->pdev_idx, temp,
++                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
++                       (tx_mask > 0x1) ? "dual" : "single",
++                       curr_level);
++        }
++    }
+ }
+ 
+ static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
+@@ -459,6 +506,11 @@
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
+ 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
++
++                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
++                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
++                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
++                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
+ 		}
+ 	} else {
+ 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
+@@ -494,6 +546,10 @@
+ 	for (i = 0; i < ab->num_radios; i++) {
+ 		pdev = &ab->pdevs[i];
+ 		ar = pdev->ar;
++
++		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
++        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
++
+ 		if (!ar)
+ 			continue;
+ 
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+--- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
++++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
+@@ -22,15 +22,15 @@
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
++#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
++#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
++#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
++#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+ #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+@@ -83,6 +83,16 @@
+ 	 * protected by data_lock
+ 	 */
+ 	int temperature;
++
++	u32 default_tx_chainmask;
++    	u32 default_rx_chainmask;
++};
++
++struct ath12k_thermal_work {
++    struct work_struct work;
++    struct ath12k *ar;
++    u32 tx_mask;
++    u32 rx_mask;
+ };
+ 
+ #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION

feeds/qca-wifi-7/mac80211/patches-zyxel_nwa130be/ath12k/0001-thermal-thermal-setting.patch

@@ -1,6 +1,6 @@
-From 1a46aa106a50a06bfa4b669d87a8143c3d59f2f4 Mon Sep 17 00:00:00 2001
+From f117d369cecadedefd2eb1467d52e9df76c14dc6 Mon Sep 17 00:00:00 2001
 From: YenLin Pan <yenlin.pan@zyxel.com.tw>
-Date: Wed, 14 May 2025 14:14:22 +0800
+Date: Wed, 9 Jul 2025 14:46:13 +0800
 Subject: [PATCH] thermal: thermal setting
 
 lv0 -100 -hi0 105 -off0 0
@@ -10,11 +10,11 @@ lv3 105  -hi3 120 -off3 100
 
 Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
 ---
- drivers/net/wireless/ath/ath12k/thermal.h | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
+ drivers/net/wireless/ath/ath12k/thermal.h | 24 +++++++++++------------
+ 1 file changed, 12 insertions(+), 12 deletions(-)
 
 diff --git a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
-index 5c91906..a493cd5 100644
+index 5c91906..dae4488 100644
 --- a/drivers/net/wireless/ath/ath12k/thermal.h
 +++ b/drivers/net/wireless/ath/ath12k/thermal.h
 @@ -13,28 +13,28 @@
@@ -34,15 +34,19 @@ index 5c91906..a493cd5 100644
  
  #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
 -#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
- #define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
 -#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
- #define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
- #define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
- #define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
 -#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
++#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
  #define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
  #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
  

feeds/qca-wifi-7/platform_drivers/Makefile

@@ -475,6 +475,22 @@ endef
 
 $(eval $(call KernelPackage,usb-f-qdss))
 
+define KernelPackage/usb-serial-xr
+  TITLE:=USB xr Serial driver support
+  KCONFIG:=CONFIG_USB_SERIAL_XR
+  FILES:=\
+        $(LINUX_DIR)/drivers/usb/serial/xr_serial.ko
+  AUTOLOAD:=$(call AutoLoad,60,xr_serial)
+  DEPENDS:=+kmod-usb-serial
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-serial-xr/description
+ USB MaxLinear/Exar USB to Serial driver
+endef
+
+$(eval $(call KernelPackage,usb-serial-xr))
+
 LEDS_MENU:=LED modules
 
 define KernelPackage/leds-tlc591xx

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -5,12 +5,10 @@ START=09
 copy_certificates() {
 	[ -f /certificates/key.pem ] || return
 
-	cp /certificates/*.pem /etc/ucentral/
-	chown root.network /etc/ucentral/*.pem
-	chmod 0440 root.network /etc/ucentral/*.pem
+	cp /certificates/cert.pem /certificates/key.pem /certificates/operational.* /etc/ucentral/
+	chown root.network /etc/ucentral/*.pem /etc/ucentral/*.ca
+	chmod 0440 root.network /etc/ucentral/*.pem /etc/ucentral/*.ca
 	[ -f /certificates/gateway.json ] && cp /certificates/gateway.json /etc/ucentral/gateway.flash
-	[ -f /certificates/dev-id ] && cp /certificates/dev-id /etc/ucentral/
-	[ -f /etc/ucentral/dev-id ] && chmod 0400 /etc/ucentral/dev-id
 	[ -f /certificates/restrictions.json ] && cp /certificates/restrictions.json /etc/ucentral/
 	[ -f /certificates/sign_pubkey.pem ] && cp /certificates/sign_pubkey.pem /etc/ucentral/
 	country=`cat /certificates/ucentral.defaults | jsonfilter -e '@.country'`

feeds/tip/certificates/files/etc/uci-defaults/99-tip-certificates.sh

@@ -2,5 +2,6 @@
 
 uci add system certificates
 uci set system.@certificates[-1].key=/etc/ucentral/key.pem
-uci set system.@certificates[-1].cert=/etc/ucentral/cert.pem
-uci set system.@certificates[-1].ca=/etc/ucentral/cas.pem
+uci set system.@certificates[-1].cert=/etc/ucentral/operational.pem
+uci set system.@certificates[-1].ca=/etc/ucentral/operational.ca
+uci commit

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -1,25 +1,22 @@
 #!/bin/sh
 
 check_certificates() {
-	[ -f /certificates/cas.pem -a -f /certificates/cert.pem -a -f /certificates/key.pem ] && exit 0
+	[ -f /certificates/cert.pem -a -f /certificates/key.pem ] && exit 0
 }
 
 check_certificates
 
+bootconfig_lookup() {
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG"
+		;;
+	1)	echo "0:BOOTCONFIG1"
+		;;
+	esac
+}
+
 . /lib/functions.sh
 mkdir -p /certificates /etc/ucentral/
-mtd=$(find_mtd_index certificates)
-
-if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-	mount -t squashfs /dev/mtdblock$mtd /certificates
-else
-	[ -n "$mtd" -a -f /sys/class/mtd/mtd$mtd/oobsize ] && ubiattach -p /dev/mtd$mtd
-	if [ -n "$(ubinfo -a | grep certificates)" ]; then
-		[ -e /dev/ubi0 ] && mount -t ubifs ubi0:certificates /certificates
-		[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
-	fi
-fi
-
 case "$(board_name)" in
 cig,wf660a)
 	mmc_dev=$(echo $(find_mmc_part "0:ETHPHYFW") | sed 's/^.\{5\}//')
@@ -31,8 +28,28 @@ cig,wf672)
 	;;
 sonicfi,rap7110c-341x)
 	mmc_dev=$(echo $(find_mmc_part "certificates") | sed 's/^.\{5\}//')
-	[ -n "$mmc_dev" ] && mount -t squashfs /dev/$mmc_dev /certificates
+	[ -n "$mmc_dev" ] && mount -t squashfs /dev/$mmc_dev /mnt
+	bootconfig=$(bootconfig_lookup)
+	if [ -n "$bootconfig" ]; then
+		mmc_dev=$(echo $(find_mmc_part "$bootconfig") | sed 's/^.\{5\}//')
+		[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
+	else
+		cp /mnt/* /certificates/
+		umount /mnt
+	fi
 	;;
+*)
+	mtd=$(find_mtd_index certificates)
+
+	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
+		mount -t squashfs /dev/mtdblock$mtd /certificates
+	else
+		[ -n "$mtd" -a -f /sys/class/mtd/mtd$mtd/oobsize ] && ubiattach -p /dev/mtd$mtd
+		if [ -n "$(ubinfo -a | grep certificates)" ]; then
+			[ -e /dev/ubi0 ] && mount -t ubifs ubi0:certificates /certificates
+			[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
+		fi
+	fi
 esac
 
 check_certificates
@@ -88,8 +105,10 @@ cig,wf189h|\
 cig,wf186h|\
 cig,wf196|\
 cig,wf188n|\
+emplus,wap380c|\
 emplus,wap385c|\
 emplus,wap386v2|\
+emplus,wap581|\
 yuncore,ax840|\
 yuncore,fap655)
 	PART_NAME=rootfs_1

feeds/tip/certificates/files/usr/bin/store_certs

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+bootconfig_lookup() {
+	bootconfig="$(fw_printenv -n cert_part)"
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG1"
+		bootconfig=1
+		;;
+	*)	echo "0:BOOTCONFIG"
+		bootconfig=0
+		;;
+	esac
+	fw_setenv cert_part $bootconfig
+}
+
+. /lib/functions.sh
+case "$(board_name)" in
+sonicfi,rap7110c-341x)
+	cd /certificates
+	tar cf /tmp/certs.tar
+	bootconfig=$(bootconfig_lookup)
+	mmc_dev=$(echo $(find_mmc_part $bootconfig) | sed 's/^.\{5\}//')
+	dd if=/tmp/certs.tar of=/dev/$bootconfig
+	;;
+esac

feeds/tip/cloud_discovery/Makefile

@@ -12,6 +12,7 @@ define Package/cloud_discovery
   SECTION:=ucentral
   CATEGORY:=uCentral
   TITLE:=TIP cloud_discovery
+  DEPENDS:=+certificates
 endef
 
 Build/Compile=

feeds/tip/cloud_discovery/files/etc/init.d/cloud_discover

@@ -22,13 +22,6 @@ start_service() {
 	[ "$valid" == "true" ] || 
 		/usr/share/ucentral/ucentral.uc /etc/ucentral/ucentral.cfg.0000000001 > /dev/null
 
-	[ "$(fw_printenv -n pki2)" -eq 1 ] || {
-		/etc/init.d/cloud_discover disable
-		return
-	}
-
-	/etc/init.d/firstcontact disable
-
 	procd_open_instance
 	procd_set_param command "$PROG"
 	procd_set_param respawn

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -23,9 +23,9 @@ let offline_time;
 let orphan_time;
 let interval;
 let timeouts = {
-	'offline': 120,
+	'offline': 4 * 60 * 60,
 	'validate': 120,
-	'orphan': 120,
+	'orphan': 2 * 60 * 60,
 };
 
 ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "cloud_discover");
@@ -80,7 +80,7 @@ function gateway_write(data) {
 	gateway ??= {};
 	let new = {};
 	let changed = false;
-	for (let key in [ 'server', 'port', 'valid' ]) {
+	for (let key in [ 'server', 'port', 'valid', 'hostname_validate' ]) {
 		if (exists(data, key))
 			new[key] = data[key];
 		else if (exists(gateway, key))
@@ -144,7 +144,7 @@ function set_state(set) {
 function discover_dhcp() {
 	let dhcp = readjsonfile('/tmp/cloud.json');
 	if (dhcp?.dhcp_server && dhcp?.dhcp_port) {
-		if (gateway_write({ server: dhcp.dhcp_server, port:dhcp.dhcp_port, valid: false })) {
+		if (gateway_write({ server: dhcp.dhcp_server, port:dhcp.dhcp_port, valid: false, hostname_validate: dhcp.no_validation ? 0 : 1 })) {
 			ulog(LOG_INFO, `Discovered cloud via DHCP ${dhcp.dhcp_server}:${dhcp.dhcp_port}\n`);
 			client_start();
 			set_state(VALIDATING);
@@ -160,27 +160,30 @@ function redirector_lookup() {
 	let serial = uci.get('system', '@system[-1]', 'mac');
 
 	fs.unlink(path);
-	system(`curl -k --cert /etc/ucentral/cert.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/cas.pem https://openlan.keys.tip.build/v1/devices/${serial} --output /tmp/ucentral.redirector`);
+	system(`curl -k --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/operational.ca https://openlan.keys.tip.build/v1/devices/${serial} --output /tmp/ucentral.redirector`);
 	if (!fs.stat(path))
 		return;
 	let redir = readjsonfile(path);
 	if (redir?.controller_endpoint) {
 		let controller_endpoint = split(redir.controller_endpoint, ':');
-		if (gateway_write({ server: controller_endpoint[0], port: controller_endpoint[1] || 15002, valid: false })) {
-			ulog(LOG_INFO, `Discovered cloud via lookup service ${redir.server}:${redir.port}\n`);
+		if (gateway_write({ server: controller_endpoint[0], port: controller_endpoint[1] || 15002, valid: false, hostname_validate: 1 })) {
+			ulog(LOG_INFO, `Discovered cloud via lookup service ${controller_endpoint[0]}:${controller_endpoint[1] || 15002}\n`);
                         client_start();
                 	set_state(VALIDATING);
 		}
+	} else {
+		ulog(LOG_INFO, 'Failed to discover cloud endpoint\n');
 	}
 }
 
 function discover_flash() {
 	if (!fs.stat('/etc/ucentral/gateway.flash'))
-		return false;
+		return 1;
 	ulog(LOG_INFO, 'Using pre-populated cloud information\n');
 	fs.writefile('/etc/ucentral/gateway.json', fs.readfile('/etc/ucentral/gateway.flash'));
 	client_start();
 	set_state(VALIDATING);
+	return 0;
 }
 
 function time_is_valid() {
@@ -210,7 +213,10 @@ function interval_handler() {
 		if (discover_dhcp())
 			return;
 
-		if (discover_flash())
+		if (system('/usr/bin/est_client enroll'))
+			return;
+
+		if (!discover_flash())
 			return;
 
 		redirector_lookup();
@@ -287,6 +293,25 @@ let ubus_methods = {
 
 		}
 	},
+	status: {
+		call: function(req) {
+			const names = [ 'discover', 'validate', 'online', 'offline', 'orphan' ];
+			let ret = { state: names[state] };
+			switch(state){
+			case OFFLINE:
+				ret.since = time() - offline_time;
+				break;
+			case ORPHAN:
+				ret.since = time() - orphan_time;
+				break;
+			case VALIDATING:
+				ret.since = time() - validate_time;;
+				break;
+			}
+			return ret;
+		},
+		args: {},
+	},
 };
 
 if (gateway_available()) {

feeds/tip/cloud_discovery/files/usr/bin/est_client

@@ -0,0 +1,172 @@
+#!/usr/bin/ucode
+
+'use strict';
+
+import { ulog_open, ulog, ULOG_SYSLOG, ULOG_STDIO, LOG_DAEMON, LOG_INFO } from 'log';
+import * as fs from 'fs';
+
+
+ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "est_client");
+
+function generate_csr(cert) {
+	if (!fs.stat('/tmp/csr.nohdr.p10')) {
+		let pipe = fs.popen(`openssl x509 -in ${cert} -noout -subject`);
+		let subject = pipe.read("all");
+		pipe.close();
+		subject = rtrim(subject);
+		subject = replace(subject, 'subject=', '/');
+		subject = replace(subject, ' = ', '=');
+		subject = replace(subject, ', ', '/');
+
+		let ret = system(`openssl req -subj "${subject}" -new -key /etc/ucentral/key.pem -out /tmp/csr.p10`);
+		if (ret) {
+			ulog(LOG_INFO, 'Failed to generate CSR\n');
+			return 1;
+		}
+
+		let input = fs.open('/tmp/csr.p10', 'r');
+		let output = fs.open('/tmp/csr.nohdr.p10', 'w');
+		let line;
+		while (line = input.read('line')) {
+		        if (substr(line, 0, 4) == '----')
+		                continue;
+			output.write(line);
+		}
+		input.close();
+		output.close();
+		ulog(LOG_INFO, 'Generated CSR\n');
+	}
+	return 0;
+}
+
+function store_operational_cert(path, target) {
+	system('mount_certs');
+	system(`cp ${path} /certificates/${target}`);
+	system('store_certs');
+
+	ulog(LOG_INFO, `Persistently stored ${target}\n`);
+}
+
+function p7_too_pem(src, dst) {
+	let input = fs.readfile(src);
+	let output = fs.open('/tmp/convert.p7', 'w');
+	output.write('-----BEGIN PKCS #7 SIGNED DATA-----\n');
+	output.write(`${input}\n-----END PKCS #7 SIGNED DATA-----`);
+	output.close();
+
+	let ret = system(`openssl pkcs7 -outform PEM -print_certs -in /tmp/convert.p7 -out ${dst}`);
+	if (ret) {
+		ulog(LOG_INFO, 'Failed to convert P7 to PEM\n');
+		return 1;
+	}
+	
+	ulog(LOG_INFO, 'Converted P7 to PEM\n');
+	
+	return 0;
+}
+
+function call_est_server(path, cert, target) {
+	if (generate_csr(cert))
+		return 1;
+
+	let ret = system('curl -X POST https://qaest.certificates.open-lan.org:8001/.well-known/est/' + path + ' -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert ' + cert + ' --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
+	if (ret) {
+		ulog(LOG_INFO, 'Failed to request operational certificate\n');
+		return 1;
+	}
+	ulog(LOG_INFO, 'EST succeeded\n');
+
+	return p7_too_pem('/tmp/operational.nohdr.p7', target);
+}
+
+
+function simpleenroll() {
+	if (fs.stat('/etc/ucentral/operational.pem')) {
+		ulog(LOG_INFO, 'Operational certificate is present\n');
+		return 0;
+	}
+
+	if (call_est_server('simpleenroll', '/etc/ucentral/cert.pem', '/etc/ucentral/operational.pem'))
+		return 1; 
+	
+	ulog(LOG_INFO, 'Operational cert acquired\n');
+	store_operational_cert('/etc/ucentral/operational.pem', 'operational.pem');
+	return 0;
+}
+
+function simplereenroll() {
+	if (!fs.stat('/etc/ucentral/operational.pem')) {
+		ulog(LOG_INFO, 'Operational certificate was not found\n');
+		return 0;
+	}
+
+	if (call_est_server('simplereenroll', '/etc/ucentral/operational.pem', '/tmp/operational.pem'))
+		return 1;
+	
+	ulog(LOG_INFO, 'Operational cert updated\n');
+	store_operational_cert('/tmp/operational.pem', 'operational.pem');
+
+	return 0;
+}
+
+function load_operational_ca() {
+	if (fs.stat('/etc/ucentral/operational.ca')) {
+		ulog(LOG_INFO, 'Operational CA is present\n');
+		return 0;
+	}
+	let ret = system('curl -X GET https://qaest.certificates.open-lan.org:8001/.well-known/est/cacerts --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.ca.nohdr.p7');
+	if (!ret)
+		ret = p7_too_pem('/tmp/operational.ca.nohdr.p7', '/etc/ucentral/operational.ca');
+	if (ret) {
+		ulog(LOG_INFO, 'Failed to load CA\n');
+		return 1;
+	}
+	system('cat /etc/ucentral/openlan.pem >> /etc/ucentral/operational.ca');
+	ulog(LOG_INFO, 'Acquired CA\n');
+	store_operational_cert('/etc/ucentral/operational.ca', 'operational.ca');
+	return 0;
+}
+
+function fwtool() {
+	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
+	let issuer = pipe.read("all");
+	pipe.close();
+
+	if (!(match(issuer, /OpenLAN/) && match(issuer, /Birth CA/)))
+		return 0;
+
+	ulog(LOG_INFO, 'The issuer is insta\n');
+
+	let metadata = fs.readfile('/tmp/sysupgrade.meta');
+	if (metadata)
+		metadata = json(metadata);
+	if (!metadata)
+		return 0;
+
+	if (!metadata.est_supported) {
+		ulog(LOG_INFO, 'The image does not support EST\n');
+		return 1;
+	}
+	ulog(LOG_INFO, 'The image supports EST\n');
+
+	return 0;
+}
+
+switch(ARGV[0]) {
+case 'enroll':
+	if (simpleenroll())
+		exit(1);
+
+	if (load_operational_ca())
+		exit(1);
+
+	exit(0);
+
+case 'reenroll':
+	if (simplereenroll())
+		exit(1);
+	exit(0);
+
+case 'fwtool':
+	exit(fwtool());
+}

feeds/tip/cloud_discovery/files/usr/share/ucentral/cloud_discovery.uc

@@ -5,6 +5,7 @@ import * as fs from 'fs';
 
 let cmd = ARGV[0];
 let ifname = getenv("interface");
+let opt224 = getenv("opt138");
 let opt224 = getenv("opt224");
 
 if (cmd != 'bound' && cmd != 'renew')
@@ -21,6 +22,13 @@ if (file.server && file.port && file.valid)
 let cloud = {
 	lease: true,
 };
+if (opt138) {
+	let dhcp = hexdec(opt138);
+	dhcp = split(dhcp, ':');
+	cloud.dhcp_server = dhcp[0];
+	cloud.dhcp_port = dhcp[1] ?? 15002;
+	cloud.no_validation = true;
+}
 if (opt224) {
 	let dhcp = hexdec(opt224);
 	dhcp = split(dhcp, ':');
@@ -29,7 +37,7 @@ if (opt224) {
 }
 fs.writefile('/tmp/cloud.json', cloud);
 
-if (opt224 && cmd == 'renew') {
+if ((opt138 || opt224) && cmd == 'renew') {
 	let ubus = libubus.connect();
 	ubus.call('cloud', 'renew');
 }

feeds/tip/firstcontact/Makefile

@@ -1,25 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=firstcontact
-PKG_RELEASE:=1
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_MAINTAINER:=John Crispin <john@phrozen.org>
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/firstcontact
-  SECTION:=ucentral
-  CATEGORY:=uCentral
-  TITLE:=TIP DigiCert firstcontact
-  DEPENDS:=+libubox +libcurl +libopenssl +certificates
-endef
-
-define Package/firstcontact/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/digicert $(1)/usr/sbin/
-	$(CP) ./files/* $(1)
-endef
-
-$(eval $(call BuildPackage,firstcontact))

feeds/tip/firstcontact/files/etc/init.d/firstcontact

@@ -1,12 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-PROG=/usr/bin/ucode
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "$PROG" -l uci -l fs /usr/share/ucentral/firstcontact.uc
-	procd_set_param respawn 1 10 0
-	procd_close_instance
-}

feeds/tip/firstcontact/files/etc/uci-defaults/zzz-firstcontact

@@ -1,3 +0,0 @@
-#!/bin/sh
-[ -f "/etc/ucentral/gateway.json" ] && /etc/init.d/firstcontact disable
-[ -f "/etc/ucentral/gateway.json" ] || /etc/init.d/ucentral disable

feeds/tip/firstcontact/files/usr/share/ucentral/firstcontact.uc

@@ -1,83 +0,0 @@
-let config = {};
-
-function store_config() {
-	let redir = split(config.Redirector, ":");
-	let gw = {
-		server: redir[0],
-		port: redir[1] || 15002
-	};
-	fs.writefile('/etc/ucentral/gateway.json', gw);
-}
-
-function store_config_uci(path) {
-        let cursor = uci.cursor(path);
-        let redir = split(config.Redirector, ":");
-
-        cursor.load("ucentral");
-        cursor.set("ucentral", "config", "server", redir[0]);
-        cursor.set("ucentral", "config", "port", redir[1] || 15002);
-        cursor.commit();
-}
-
-function digicert() {
-	let devid;
-	let fd = fs.open("/etc/ucentral/dev-id", "r");
-	if (!fd) {
-		warn("firstcontact: failed to find device id");
-		exit(1);
-	}
-	devid = fd.read("all");
-	fd.close();
-
-	ret = system(sprintf('/usr/sbin/digicert -i %s', devid));
-	if (ret) {
-		warn("firstcontact failed to contact redirector, check DHCP option\n");
-		let fd = fs.open("/tmp/capwap/dhcp_opt.txt", "r");
-		if (!fd) {
-			warn("No redirector found\n");
-			exit(1);
-		} else {
-			config.Redirector = fd.read("all");
-			fd.close();
-		}
-	} else {
-		let redirector = { };
-		let fd = fs.open("/etc/ucentral/redirector.json", "r");
-		if (fd) {
-			let data = fd.read("all");
-			fd.close();
-
-			try {
-				redirector = json(data);
-			}
-			catch (e) {
-				warn("firstcontact: Unable to parse JSON data in %s: %s", path, e);
-
-				exit(1);
-			}
-		}
-
-		for (let r in redirector.fields)
-			if (r.name && r.value)
-				config[r.name] = r.value;
-		if (!config.Redirector) {
-			warn("Reply is missing Redirector field\n");
-			exit(1);
-		}
-
-	}
-}
-
-if (!fs.stat('/etc/ucentral/gateway.json')) {
-	digicert();
-	store_config();
-	store_config_uci();
-	store_config_uci("/etc/config-shadow/");
-	warn("firstcontact: managed to look up redirector\n");
-}
-
-system("/etc/init.d/ucentral enable");
-system("/etc/init.d/firstcontact disable");
-system("reload_config");
-system("/etc/init.d/ucentral start");
-system("/etc/init.d/firstcontact stop");

feeds/tip/firstcontact/src/CMakeLists.txt

@@ -1,13 +0,0 @@
-cmake_minimum_required(VERSION 2.6)
-
-PROJECT(digicert C)
-INCLUDE(GNUInstallDirs)
-ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
-
-SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
-
-ADD_EXECUTABLE(digicert digicert.c)
-TARGET_LINK_LIBRARIES(digicert curl crypto ssl ubox)
-INSTALL(TARGETS digicert
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)

feeds/tip/firstcontact/src/digicert.c

@@ -1,104 +0,0 @@
-#define _GNU_SOURCE
-#include <stdio.h>
-#include <unistd.h>
-#include <getopt.h>
-
-#include <curl/curl.h>
-
-#include <libubox/ulog.h>
-
-static const char *file_cert = "/etc/ucentral/cert.pem";
-static const char *file_key  = "/etc/ucentral/key.pem";
-static const char *file_json = "/etc/ucentral/redirector.json";
-static const char *file_dbg  = "/tmp/digicert.hdr";
-
-int main(int argc, char **argv)
-{
-	FILE *fp_json;
-	FILE *fp_dbg;
-	CURLcode res;
-	CURL *curl;
-	char *devid = NULL;
-	char *url;
-
-	alarm(15);
-
-	while (1) {
-		int option = getopt(argc, argv, "k:c:o:hi:");
-
-		if (option == -1)
-			break;
-
-		switch (option) {
-		case 'k':
-			file_key = optarg;
-			break;
-		case 'c':
-			file_cert = optarg;
-			break;
-		case 'o':
-			file_json = optarg;
-			break;
-		case 'i':
-			devid = optarg;
-			break;
-		default:
-		case 'h':
-			printf("Usage: digicert OPTIONS\n"
-			       "  -k <keyfile>\n"
-			       "  -c <certfile>\n"
-			       "  -o <outfile>\n"
-			       "  -i <devid>\n");
-			return -1;
-		}
-	}
-
-	if (!devid) {
-		fprintf(stderr, "missing devid\n");
-		return -1;
-	}
-
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "digicert");
-	ULOG_INFO("attempting first contact\n");
-
-	fp_dbg = fopen(file_dbg, "wb");
-	fp_json = fopen(file_json, "wb");
-	if (!fp_json) {
-		ULOG_ERR("failed to create %s\n", file_json);
-		return -1;
-	}
-
-	curl_global_init(CURL_GLOBAL_DEFAULT);
-	curl = curl_easy_init();
-	if (!curl) {
-		ULOG_ERR("curl_easy_init failed\n");
-		return -1;
-	}
-
-	if (asprintf(&url, "https://clientauth.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
-		ULOG_ERR("failed to assemble url\n");
-		return -1;
-	}
-
-	curl_easy_setopt(curl, CURLOPT_URL, url);
-	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
-	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
-	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
-	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
-	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
-	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
-	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
-	curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT, 10L);
-
-	res = curl_easy_perform(curl);
-	if (res != CURLE_OK)
-		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
-	else
-		ULOG_INFO("downloaded first contact data\n");
-	curl_easy_cleanup(curl);
-	curl_global_cleanup();
-
-	ulog_close();
-
-	return (res != CURLE_OK);
-}

feeds/tip/luci/luci-mod-ucentral/root/sbin/certupdate

@@ -17,14 +17,16 @@ mkdir -p /tmp/certs
 tar x -C /tmp/certs -f /tmp/certs.tar
 
 # make sure the required files exist
-[ -f /tmp/certs/cas.pem -a -f /tmp/certs/key.pem -a -f /tmp/certs/cert.pem ] || exit 1
-[ -f /tmp/certs/gateway.json -o -f /tmp/certs/dev-id ] || exit 1
+[ -f /tmp/certs/key.pem -a -f /tmp/certs/cert.pem ] || exit 1
 
 # copy the certificates to /etc
 cp /tmp/certs/*.pem /certificates
 
+# remove old operational certs
+rm /certificates/operational.*
+
 # copy dev-id or gateway.json
-for a in dev-id gateway.json; do
+for a in gateway.json; do
 	if [ -f /tmp/certs/$a ]; then
 		cp /tmp/certs/$a /certificates
 	else

feeds/tip/tip-defaults/files/etc/ucentral/insta.pem

@@ -0,0 +1,6 @@
+-----BEGIN CERTIFICATE-----
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
+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----
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
+-----END CERTIFICATE-----

feeds/ucentral/modemmanager/Config.in

@@ -0,0 +1,30 @@
+menu "Configuration"
+	depends on PACKAGE_modemmanager
+
+config MODEMMANAGER_WITH_MBIM
+	bool "Include MBIM support"
+	default y
+	help
+	  Compile ModemManager with MBIM support
+
+config MODEMMANAGER_WITH_QMI
+	bool "Include QMI support"
+	default y
+	help
+	  Compile ModemManager with QMI support
+
+config MODEMMANAGER_WITH_QRTR
+	bool "Include QRTR support"
+	default y
+	depends on MODEMMANAGER_WITH_QMI
+	select LIBQMI_WITH_QRTR_GLIB
+	help
+	  Compile ModemManager with QRTR support
+
+config MODEMMANAGER_WITH_AT_COMMAND_VIA_DBUS
+	bool "Allow AT commands via DBus"
+	default n
+	help
+	  Compile ModemManager allowing AT commands without debug flag
+
+endmenu

feeds/ucentral/modemmanager/Makefile

@@ -0,0 +1,140 @@
+#
+# Copyright (C) 2016 Velocloud Inc.
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=modemmanager
+PKG_SOURCE_VERSION:=1.20.6
+PKG_RELEASE:=12
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://gitlab.freedesktop.org/mobile-broadband/ModemManager.git
+PKG_MIRROR_HASH:=e90103e2e42bb826bbbac83937a9a69f50348cd6ce0d8da655a12b65494ce7c9
+
+PKG_MAINTAINER:=Nicholas Smith <nicholas@nbembedded.com>
+PKG_LICENSE:=GPL-2.0-or-later
+PKG_LICENSE_FILES:=COPYING
+
+PKG_BUILD_DEPENDS:=glib2/host libxslt/host
+PKG_BUILD_FLAGS:=gc-sections
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+include $(INCLUDE_DIR)/meson.mk
+
+TARGET_CFLAGS += -fno-merge-all-constants -fmerge-constants
+
+define Package/modemmanager/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/modemmanager
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Control utility for any kind of mobile broadband modem
+  URL:=https://www.freedesktop.org/wiki/Software/ModemManager
+  DEPENDS:= \
+	$(INTL_DEPENDS) \
+	+glib2 \
+	+dbus \
+	+ppp \
+	+MODEMMANAGER_WITH_MBIM:libmbim \
+	+MODEMMANAGER_WITH_QMI:libqmi \
+	+MODEMMANAGER_WITH_QRTR:libqrtr-glib
+endef
+
+define Package/modemmanager/description
+  ModemManager is a D-Bus-activated service which allows controlling mobile
+  broadband modems. Add kernel modules for your modems as needed.
+  Select Utilities/usb-modeswitch if needed.
+endef
+
+MESON_ARGS += \
+	-Dudev=false \
+	-Dudevdir=/lib/udev \
+	-Dtests=false \
+	-Dsystemdsystemunitdir=no \
+	-Dsystemd_suspend_resume=false \
+	-Dsystemd_journal=false \
+	-Dpolkit=no \
+	-Dintrospection=false \
+	-Dman=false \
+	-Dbash_completion=false \
+	-Db_lto=true \
+	-Dmbim=$(if $(CONFIG_MODEMMANAGER_WITH_MBIM),true,false) \
+	-Dqmi=$(if $(CONFIG_MODEMMANAGER_WITH_QMI),true,false) \
+	-Dqrtr=$(if $(CONFIG_MODEMMANAGER_WITH_QRTR),true,false) \
+	-Dat_command_via_dbus=$(if $(CONFIG_MODEMMANAGER_WITH_AT_COMMAND_VIA_DBUS),true,false)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/ModemManager
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/ModemManager/*.h $(1)/usr/include/ModemManager
+	$(INSTALL_DIR) $(1)/usr/include/libmm-glib
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/libmm-glib/*.h $(1)/usr/include/libmm-glib
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libmm-glib.so* $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/ModemManager.pc $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/mm-glib.pc $(1)/usr/lib/pkgconfig
+	$(INSTALL_DIR) $(1)/usr/share/dbus-1/interfaces
+	$(CP) $(PKG_BUILD_DIR)/introspection/org.freedesktop.ModemManager1.* $(1)/usr/share/dbus-1/interfaces
+endef
+
+define Package/modemmanager/install
+	$(INSTALL_DIR) $(1)/lib/udev/rules.d
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/lib/udev/rules.d/*.rules $(1)/lib/udev/rules.d
+
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/ModemManager $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/usr/sbin/ModemManager-wrapper $(1)/usr/sbin
+
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/mmcli $(1)/usr/bin
+
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libmm-glib.so.* $(1)/usr/lib
+
+	$(INSTALL_DIR) $(1)/usr/lib/ModemManager
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ModemManager/libmm-shared-*.so* $(1)/usr/lib/ModemManager
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ModemManager/libmm-plugin-*.so* $(1)/usr/lib/ModemManager
+
+	$(INSTALL_DIR) $(1)/usr/lib/ModemManager/connection.d
+	$(INSTALL_BIN) ./files/10-report-down $(1)/usr/lib/ModemManager/connection.d
+
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/org.freedesktop.ModemManager1.conf $(1)/etc/dbus-1/system.d
+
+	$(INSTALL_DIR) $(1)/usr/share/dbus-1/system-services
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/dbus-1/system-services/org.freedesktop.ModemManager1.service $(1)/usr/share/dbus-1/system-services
+
+	$(INSTALL_DIR) $(1)/usr/share/ModemManager
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/ModemManager/*.conf $(1)/usr/share/ModemManager
+	$(INSTALL_DATA) ./files/modemmanager.common $(1)/usr/share/ModemManager
+
+	$(INSTALL_DIR) $(1)/usr/share/ModemManager/fcc-unlock.available.d
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/ModemManager/fcc-unlock.available.d/* $(1)/usr/share/ModemManager/fcc-unlock.available.d
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/modemmanager.init $(1)/etc/init.d/modemmanager
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/usb
+	$(INSTALL_DATA) ./files/25-modemmanager-usb $(1)/etc/hotplug.d/usb
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/net
+	$(INSTALL_DATA) ./files/25-modemmanager-net $(1)/etc/hotplug.d/net
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/tty
+	$(INSTALL_DATA) ./files/25-modemmanager-tty $(1)/etc/hotplug.d/tty
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/wwan
+	$(INSTALL_DATA) ./files/25-modemmanager-wwan $(1)/etc/hotplug.d/wwan
+
+	$(INSTALL_DIR) $(1)/lib/netifd/proto
+	$(INSTALL_BIN) ./files/modemmanager.proto $(1)/lib/netifd/proto/modemmanager.sh
+endef
+
+$(eval $(call BuildPackage,modemmanager))

feeds/ucentral/modemmanager/README.md

@@ -0,0 +1,44 @@
+# OpenWrt ModemManager
+
+## Description
+
+Cellular modem control and connectivity
+
+Optional libraries libmbim and libqmi are available.
+Your modem may require additional kernel modules and/or the usb-modeswitch
+package.
+
+## Usage
+
+Once installed, you can configure the 2G/3G/4G modem connections directly in
+/etc/config/network as in the following example:
+
+    config interface 'broadband'
+        option device      '/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2.1'
+        option proto       'modemmanager'
+        option apn         'ac.vodafone.es'
+        option allowedauth 'pap chap'
+        option username    'vodafone'
+        option password    'vodafone'
+        option pincode     '7423'
+        option iptype      'ipv4'
+        option plmn        '214001'
+        option lowpower    '1'
+        option signalrate  '30'
+        option allow_roaming '1'
+
+Only 'device' and 'proto' are mandatory options, the remaining ones are all
+optional.
+
+The 'allowedauth' option allows limiting the list of authentication protocols.
+It is given as a space-separated list of values, including any of the
+following: 'pap', 'chap', 'mschap', 'mschapv2' or 'eap'. It will default to
+allowing all protocols.
+
+The 'iptype' option supports any of these values: 'ipv4', 'ipv6' or 'ipv4v6'.
+It will default to 'ipv4' if not given.
+
+The 'plmn' option allows to set the network operator MCCMNC.
+
+The 'signalrate' option set's the signal refresh rate (in seconds) for the device.
+You can call signal info with command: mmcli -m 0 --signal-get

feeds/ucentral/modemmanager/files/10-report-down

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# SPDX-License-Identifier: CC0-1.0
+# 2022 Aleksander Morgado <aleksander@aleksander.es>
+#
+# Automatically report to netifd that the underlying modem
+# is really disconnected
+#
+# require program name and at least 4 arguments
+[ $# -lt 4 ] && exit 1
+
+MODEM_PATH="$1"
+BEARER_PATH="$2"
+INTERFACE="$3"
+STATE="$4"
+
+[ "${STATE}" = "disconnected" ] || exit 0
+
+. /usr/share/ModemManager/modemmanager.common
+. /lib/netifd/netifd-proto.sh
+INCLUDE_ONLY=1 . /lib/netifd/proto/modemmanager.sh
+
+MODEM_STATUS=$(mmcli --modem="${MODEM_PATH}" --output-keyvalue)
+[ -n "${MODEM_STATUS}" ] || exit 1
+
+MODEM_DEVICE=$(modemmanager_get_field "${MODEM_STATUS}" "modem.generic.device")
+[ -n "${MODEM_DEVICE}" ] || exit 2
+
+CFG=$(mm_get_modem_config "${MODEM_DEVICE}")
+[ -n "${CFG}" ] || exit 3
+
+logger -t "modemmanager" "interface ${CFG} (network device ${INTERFACE}) ${STATE}"
+proto_init_update $INTERFACE 0
+proto_send_update $CFG
+exit 0

feeds/ucentral/modemmanager/files/25-modemmanager-net

@@ -0,0 +1,31 @@
+#!/bin/sh
+# Copyright (C) 2016 Velocloud Inc
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+# Load common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+# We require a interface name
+[ -n "${INTERFACE}" ] || exit
+
+# Always make sure the rundir exists
+mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
+
+# Report network interface
+mm_log "info" "${ACTION} network interface ${INTERFACE}: event processed"
+mm_report_event "${ACTION}" "${INTERFACE}" "net" "/sys${DEVPATH}"
+
+# Look for an associated cdc-wdm interface
+
+cdcwdm=""
+
+case "${ACTION}" in
+	"add")	  cdcwdm=$(mm_track_cdcwdm "${INTERFACE}") ;;
+	"remove") cdcwdm=$(mm_untrack_cdcwdm "${INTERFACE}") ;;
+esac
+
+# Report cdc-wdm device, if any
+[ -n "${cdcwdm}" ] && {
+	mm_log "info" "${ACTION} cdc interface ${cdcwdm}: custom event processed"
+	mm_report_event "${ACTION}" "${cdcwdm}" "usbmisc" "/sys${DEVPATH}"
+}

feeds/ucentral/modemmanager/files/25-modemmanager-tty

@@ -0,0 +1,16 @@
+#!/bin/sh
+# Copyright (C) 2016 Velocloud Inc
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+# Load hotplug common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+# We require a device name
+[ -n "$DEVNAME" ] || exit
+
+# Always make sure the rundir exists
+mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
+
+# Report TTY
+mm_log "info" "${ACTION} serial interface ${DEVNAME}: event processed"
+mm_report_event "${ACTION}" "${DEVNAME}" "tty" "/sys${DEVPATH}"

feeds/ucentral/modemmanager/files/25-modemmanager-usb

@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright (C) 2019 Aleksander Morgado <aleksander@aleksander.es>
+
+# We need to process only full USB device removal events, we don't
+# want to process specific interface removal events.
+[ "$ACTION" = remove ] || exit
+[ -z "${INTERFACE}" ] || exit
+
+# Load common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+mm_clear_modem_wait_status "/sys${DEVPATH}"
+mm_cleanup_interface_by_sysfspath "/sys${DEVPATH}"

feeds/ucentral/modemmanager/files/25-modemmanager-wwan

@@ -0,0 +1,15 @@
+#!/bin/sh
+# Copyright (C) 2021 Aleksander Morgado <aleksander@aleksander.es>
+
+# Load hotplug common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+# We require a device name
+[ -n "$DEVNAME" ] || exit
+
+# Always make sure the rundir exists
+mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
+
+# Report wwan
+mm_log "info" "${ACTION} wwan control port ${DEVNAME}: event processed"
+mm_report_event "${ACTION}" "${DEVNAME}" "wwan" "/sys${DEVPATH}"

feeds/ucentral/modemmanager/files/modemmanager.common

@@ -0,0 +1,376 @@
+#!/bin/sh
+# Copyright (C) 2016 Velocloud Inc
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+################################################################################
+
+. /lib/functions.sh
+. /lib/netifd/netifd-proto.sh
+
+################################################################################
+# Runtime state
+
+MODEMMANAGER_RUNDIR="/var/run/modemmanager"
+MODEMMANAGER_PID_FILE="${MODEMMANAGER_RUNDIR}/modemmanager.pid"
+MODEMMANAGER_CDCWDM_CACHE="${MODEMMANAGER_RUNDIR}/cdcwdm.cache"
+MODEMMANAGER_SYSFS_CACHE="${MODEMMANAGER_RUNDIR}/sysfs.cache"
+MODEMMANAGER_EVENTS_CACHE="${MODEMMANAGER_RUNDIR}/events.cache"
+
+################################################################################
+# Common logging
+
+mm_log() {
+	local level="$1"; shift
+	logger -p "daemon.${level}" -t "ModemManager[$$]" "hotplug: $*"
+}
+
+################################################################################
+# Receives as input argument the full sysfs path of the device
+# Returns the physical device sysfs path
+#
+# NOTE: this method only works when the device exists, i.e. it cannot be used
+# on removal hotplug events
+
+mm_find_physdev_sysfs_path() {
+	local tmp_path="$1"
+
+	while true; do
+		tmp_path=$(dirname "${tmp_path}")
+
+		# avoid infinite loops iterating
+		[ -z "${tmp_path}" ] || [ "${tmp_path}" = "/" ] && return
+
+		# For USB devices, the physical device will be that with a idVendor
+		# and idProduct pair of files
+		[ -f "${tmp_path}"/idVendor ] && [ -f "${tmp_path}"/idProduct ] && {
+			tmp_path=$(readlink -f "$tmp_path")
+			echo "${tmp_path}"
+			return
+		}
+
+		# For PCI devices, the physical device will be that with a vendor
+		# and device pair of files
+		[ -f "${tmp_path}"/vendor ] && [ -f "${tmp_path}"/device ] && {
+			tmp_path=$(readlink -f "$tmp_path")
+			echo "${tmp_path}"
+			return
+		}
+	done
+}
+
+################################################################################
+
+# Returns the cdc-wdm name retrieved from sysfs
+mm_track_cdcwdm() {
+	local wwan="$1"
+	local cdcwdm
+
+	cdcwdm=$(ls "/sys/class/net/${wwan}/device/usbmisc/")
+	[ -n "${cdcwdm}" ] || return
+
+	# We have to cache it for later, as we won't be able to get the
+	# associated cdc-wdm device on a remove event
+	echo "${wwan} ${cdcwdm}" >> "${MODEMMANAGER_CDCWDM_CACHE}"
+
+	echo "${cdcwdm}"
+}
+
+# Returns the cdc-wdm name retrieved from the cache
+mm_untrack_cdcwdm() {
+	local wwan="$1"
+	local cdcwdm
+
+	# Look for the cached associated cdc-wdm device
+	[ -f "${MODEMMANAGER_CDCWDM_CACHE}" ] || return
+
+	cdcwdm=$(awk -v wwan="${wwan}" '!/^#/ && $0 ~ wwan { print $2 }' "${MODEMMANAGER_CDCWDM_CACHE}")
+	[ -n "${cdcwdm}" ] || return
+
+	# Remove from cache
+	sed -i "/${wwan} ${cdcwdm}/d" "${MODEMMANAGER_CDCWDM_CACHE}"
+
+	echo "${cdcwdm}"
+}
+
+################################################################################
+# ModemManager needs some time from the ports being added until a modem object
+# is exposed in DBus. With the logic here we do an explicit wait of N seconds
+# for ModemManager to expose the new modem object, making sure that the wait is
+# unique per device (i.e. per physical device sysfs path).
+
+# Gets the modem wait status as retrieved from the cache
+mm_get_modem_wait_status() {
+	local sysfspath="$1"
+
+	# If no sysfs cache file, we're done
+	[ -f "${MODEMMANAGER_SYSFS_CACHE}" ] || return
+
+	# Get status of the sysfs path
+	awk -v sysfspath="${sysfspath}" '!/^#/ && $0 ~ sysfspath { print $2 }' "${MODEMMANAGER_SYSFS_CACHE}"
+}
+
+# Clear the modem wait status from the cache, if any
+mm_clear_modem_wait_status() {
+	local sysfspath="$1"
+
+	local escaped_sysfspath
+
+	[ -f "${MODEMMANAGER_SYSFS_CACHE}" ] && {
+		# escape '/', '\' and '&' for sed...
+		escaped_sysfspath=$(echo "$sysfspath" | sed -e 's/[\/&]/\\&/g')
+		sed -i "/${escaped_sysfspath}/d" "${MODEMMANAGER_SYSFS_CACHE}"
+	}
+}
+
+# Sets the modem wait status in the cache
+mm_set_modem_wait_status() {
+	local sysfspath="$1"
+	local status="$2"
+
+	# Remove sysfs line before adding the new one with the new state
+	mm_clear_modem_wait_status "${sysfspath}"
+
+	# Add the new status
+	echo "${sysfspath} ${status}" >> "${MODEMMANAGER_SYSFS_CACHE}"
+}
+
+# Callback for config_foreach()
+mm_get_modem_config_foreach_cb() {
+	local cfg="$1"
+	local sysfspath="$2"
+
+	local proto
+	config_get proto "${cfg}" proto
+	[ "${proto}" = modemmanager ] || return 0
+
+	local dev
+	dev=$(uci_get network "${cfg}" device)
+	[ "${dev}" = "${sysfspath}" ] || return 0
+
+	echo "${cfg}"
+}
+
+# Returns the name of the interface configured for this device
+mm_get_modem_config() {
+	local sysfspath="$1"
+
+	# Look for configuration for the given sysfs path
+	config_load network
+	config_foreach mm_get_modem_config_foreach_cb interface "${sysfspath}"
+}
+
+# Callback for config_foreach()
+mm_get_wwan_config_foreach_cb() {
+	local cfg="$1"
+	local sysfspath="$2"
+
+	local proto
+	config_get proto "${cfg}" proto
+	[ "${proto}" = "wwan" ] || return 0
+
+	local dev devname devpath
+	dev=$(uci_get network "${cfg}" device)
+	devname=$(basename "${dev}")
+	devpath=$(find /sys/devices -name "${devname}")
+	[[ "${devpath}" = "${sysfspath}*" ]] || return 0
+
+	echo "${cfg}"
+}
+
+# Returns the name of the interface configured for this device
+mm_get_wwan_config() {
+	local sysfspath="$1"
+
+	# Look for configuration for the given sysfs path
+	config_load network
+	config_foreach mm_get_wwan_config_foreach_cb interface "${sysfspath}"
+}
+
+# Wait for a modem in the specified sysfspath
+mm_wait_for_modem() {
+	local cfg="$1"
+	local sysfspath="$2"
+
+	# TODO: config max wait
+	local n=45
+	local step=5
+
+	while [ $n -ge 0 ]; do
+		[ -d "${sysfspath}" ] || {
+			mm_log "error" "ignoring modem detection request: no device at ${sysfspath}"
+			proto_set_available "${cfg}" 0
+			return 1
+		}
+
+		# Check if the modem exists at the given sysfs path
+		if ! mmcli -m "${sysfspath}" > /dev/null 2>&1
+		then
+			mm_log "error" "modem not detected at sysfs path"
+		else
+			mm_log "info" "modem exported successfully at ${sysfspath}"
+			mm_log "info" "setting interface '${cfg}' as available"
+			proto_set_available "${cfg}" 1
+			ifup "${cfg}"
+			return 0
+		fi
+
+		sleep $step
+		n=$((n-step))
+	done
+
+	mm_log "error" "timed out waiting for the modem to get exported at ${sysfspath}"
+	proto_set_available "${cfg}" 0
+	return 2
+}
+
+mm_report_modem_wait() {
+	local sysfspath=$1
+
+	local parent_sysfspath status
+
+	parent_sysfspath=$(mm_find_physdev_sysfs_path "$sysfspath")
+	[ -n "${parent_sysfspath}" ] || {
+		mm_log "error" "parent device sysfspath not found"
+		return
+	}
+
+	status=$(mm_get_modem_wait_status "${parent_sysfspath}")
+	case "${status}" in
+		"")
+			local cfg
+
+			cfg=$(mm_get_modem_config "${parent_sysfspath}")
+			[ -z "${cfg}" ] && cfg=$(mm_get_wwan_config "${parent_sysfspath}")
+			if [ -n "${cfg}" ]; then
+				mm_log "info" "interface '${cfg}' is set to configure device '${parent_sysfspath}'"
+				mm_log "info" "now waiting for modem at sysfs path ${parent_sysfspath}"
+				mm_set_modem_wait_status "${parent_sysfspath}" "processed"
+				# Launch subshell for the explicit wait
+				( mm_wait_for_modem "${cfg}" "${parent_sysfspath}" ) > /dev/null 2>&1 &
+			fi
+			;;
+		"processed")
+			mm_log "info" "already waiting for modem at sysfs path ${parent_sysfspath}"
+			;;
+		"ignored")
+			;;
+		*)
+			mm_log "error" "unknown status read for device at sysfs path ${parent_sysfspath}"
+			;;
+	esac
+}
+
+################################################################################
+# Cleanup interfaces
+
+mm_cleanup_interface_cb() {
+	local cfg="$1"
+
+	local proto
+	config_get proto "${cfg}" proto
+	[ "${proto}" = modemmanager ] || return 0
+
+	proto_set_available "${cfg}" 0
+}
+
+mm_cleanup_interfaces() {
+	config_load network
+	config_foreach mm_cleanup_interface_cb interface
+}
+
+mm_cleanup_interface_by_sysfspath() {
+	local dev="$1"
+
+	local cfg
+	cfg=$(mm_get_modem_config "$dev")
+	[ -n "${cfg}" ] || return
+
+	mm_log "info" "setting interface '$cfg' as unavailable"
+	proto_set_available "${cfg}" 0
+}
+
+################################################################################
+# Event reporting
+
+# Receives as input the action, the device name and the subsystem
+mm_report_event() {
+	local action="$1"
+	local name="$2"
+	local subsystem="$3"
+	local sysfspath="$4"
+
+	# Do not save virtual devices
+	local virtual
+	virtual="$(echo "$sysfspath" | cut -d'/' -f4)"
+	[ "$virtual" = "virtual" ] && {
+		mm_log "debug" "sysfspath is a virtual device ($sysfspath)"
+		return
+	}
+
+	# Track/untrack events in cache
+	case "${action}" in
+		"add")
+			# On add events, store event details in cache (if not exists yet)
+			grep -qs "${name},${subsystem}" "${MODEMMANAGER_EVENTS_CACHE}" || \
+				echo "${action},${name},${subsystem},${sysfspath}" >> "${MODEMMANAGER_EVENTS_CACHE}"
+			;;
+		"remove")
+			# On remove events, remove old events from cache (match by subsystem+name)
+			sed -i "/${name},${subsystem}/d" "${MODEMMANAGER_EVENTS_CACHE}"
+			;;
+	esac
+
+	# Report the event
+	mm_log "debug" "event reported: action=${action}, name=${name}, subsystem=${subsystem}"
+	mmcli --report-kernel-event="action=${action},name=${name},subsystem=${subsystem}" 1>/dev/null 2>&1 &
+
+	# Wait for added modem if a sysfspath is given
+	[ -n "${sysfspath}" ] && [ "$action" = "add" ] && mm_report_modem_wait "${sysfspath}"
+}
+
+mm_report_event_from_cache_line() {
+	local event_line="$1"
+
+	local action name subsystem sysfspath
+	action=$(echo "${event_line}" | awk -F ',' '{ print $1 }')
+	name=$(echo "${event_line}" | awk -F ',' '{ print $2 }')
+	subsystem=$(echo "${event_line}" | awk -F ',' '{ print $3 }')
+	sysfspath=$(echo "${event_line}" | awk -F ',' '{ print $4 }')
+
+	mm_log "debug" "cached event found: action=${action}, name=${name}, subsystem=${subsystem}, sysfspath=${sysfspath}"
+	mm_report_event "${action}" "${name}" "${subsystem}" "${sysfspath}"
+}
+
+mm_report_events_from_cache() {
+	# Remove the sysfs cache
+	rm -f "${MODEMMANAGER_SYSFS_CACHE}"
+
+	local n=60
+	local step=1
+	local mmrunning=0
+
+	# Wait for ModemManager to be available in the bus
+	while [ $n -ge 0 ]; do
+		sleep $step
+		mm_log "info" "checking if ModemManager is available..."
+
+		if ! mmcli -L >/dev/null 2>&1
+		then
+			mm_log "info" "ModemManager not yet available"
+		else
+			mmrunning=1
+			break
+		fi
+		n=$((n-step))
+	done
+
+	[ ${mmrunning} -eq 1 ] || {
+		mm_log "error" "couldn't report initial kernel events: ModemManager not running"
+		return
+	}
+
+	# Report cached kernel events
+	while IFS= read -r event_line; do
+		mm_report_event_from_cache_line "${event_line}"
+	done < ${MODEMMANAGER_EVENTS_CACHE}
+}

feeds/ucentral/modemmanager/files/modemmanager.init

@@ -0,0 +1,49 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+USE_PROCD=1
+START=70
+
+LOG_LEVEL="INFO"
+
+stop_service() {
+	# Load common utils
+	. /usr/share/ModemManager/modemmanager.common
+	# Set all configured interfaces as unavailable
+	mm_cleanup_interfaces
+}
+
+start_service() {
+	# Setup ModemManager service
+	#
+	# We will make sure that the rundir always exists, and we initially cleanup
+	# all interfaces flagging them as unavailable.
+	#
+	# The cached events processing will wait for MM to be available in DBus
+	# and will make sure all ports are re-notified to ModemManager every time
+	# it starts.
+	#
+	# All these commands need to be executed on every MM start, even after
+	# procd-triggered respawns, which is why this is wrapped in a startup
+	# wrapper script called '/usr/sbin/ModemManager-wrapper'.
+	#
+	. /usr/share/ModemManager/modemmanager.common
+	procd_open_instance
+	procd_set_param command /usr/sbin/ModemManager-wrapper
+	procd_append_param command --log-level="$LOG_LEVEL"
+	[ "$LOG_LEVEL" = "DEBUG" ] && procd_append_param command --debug
+	procd_set_param respawn "${respawn_threshold:-3600}" "${respawn_timeout:-5}" "${respawn_retry:-5}"
+	procd_set_param pidfile "${MODEMMANAGER_PID_FILE}"
+	procd_close_instance
+}
+
+reload_service()
+{
+	stop
+	start
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger network
+}

feeds/ucentral/modemmanager/files/modemmanager.proto

@@ -0,0 +1,650 @@
+#!/bin/sh
+# Copyright (C) 2016-2019 Aleksander Morgado <aleksander@aleksander.es>
+
+[ -x /usr/bin/mmcli ] || exit 0
+[ -x /usr/sbin/pppd ] || exit 0
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. ../netifd-proto.sh
+	. ./ppp.sh
+	init_proto "$@"
+}
+
+cdr2mask ()
+{
+	# Number of args to shift, 255..255, first non-255 byte, zeroes
+	set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
+	if [ "$1" -gt 1 ]
+	then
+		shift "$1"
+	else
+		shift
+	fi
+	echo "${1-0}"."${2-0}"."${3-0}"."${4-0}"
+}
+
+# This method expects as first argument a list of key-value pairs, as returned by mmcli --output-keyvalue
+# The second argument must be exactly the name of the field to read
+#
+# Sample output:
+#     $ mmcli -m 0 -K
+#     modem.dbus-path                                 : /org/freedesktop/ModemManager1/Modem/0
+#     modem.generic.device-identifier                 : ed6eff2e3e0f90463da1c2a755b2acacd1335752
+#     modem.generic.manufacturer                      : Dell Inc.
+#     modem.generic.model                             : DW5821e Snapdragon X20 LTE
+#     modem.generic.revision                          : T77W968.F1.0.0.4.0.GC.009\n026
+#     modem.generic.carrier-configuration             : GCF
+#     modem.generic.carrier-configuration-revision    : 08E00009
+#     modem.generic.hardware-revision                 : DW5821e Snapdragon X20 LTE
+#     ....
+modemmanager_get_field() {
+	local list=$1
+	local field=$2
+	local value=""
+
+	[ -z "${list}" ] || [ -z "${field}" ] && return
+
+	# there is always at least a whitespace after each key, and we use that as part of the
+	# key matching we do (e.g. to avoid getting 'modem.generic.state-failed-reason' as a result
+	# when grepping for 'modem.generic.state'.
+	line=$(echo "${list}" | grep "${field} ")
+	value=$(echo ${line#*:})
+
+	# not found?
+	[ -n "${value}" ] || return 2
+
+	# only print value if set
+	[ "${value}" != "--" ] && echo "${value}"
+	return 0
+}
+
+# build a comma-separated list of values from the list
+modemmanager_get_multivalue_field() {
+	local list=$1
+	local field=$2
+	local value=""
+	local length idx item
+
+	[ -z "${list}" ] || [ -z "${field}" ] && return
+
+	length=$(modemmanager_get_field "${list}" "${field}.length")
+	[ -n "${length}" ] || return 0
+	[ "$length" -ge 1 ] || return 0
+
+	idx=1
+	while [ $idx -le "$length" ]; do
+		item=$(modemmanager_get_field "${list}" "${field}.value\[$idx\]")
+		[ -n "${item}" ] && [ "${item}" != "--" ] && {
+			[ -n "${value}" ] && value="${value}, "
+			value="${value}${item}"
+		}
+		idx=$((idx + 1))
+	done
+
+	# nothing built?
+	[ -n "${value}" ] || return 2
+
+	# only print value if set
+	echo "${value}"
+	return 0
+}
+
+modemmanager_cleanup_connection() {
+	local modemstatus="$1"
+
+	local bearercount idx bearerpath
+
+	bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
+
+	# do nothing if no bearers reported
+	[ -n "${bearercount}" ] && [ "$bearercount" -ge 1 ] && {
+		# explicitly disconnect just in case
+		mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
+		# and remove all bearer objects, if any found
+		idx=1
+		while [ $idx -le "$bearercount" ]; do
+			bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[$idx\]")
+			mmcli --modem "${device}" --delete-bearer="${bearerpath}" >/dev/null 2>&1
+			idx=$((idx + 1))
+		done
+	}
+}
+
+modemmanager_connected_method_ppp_ipv4() {
+	local interface="$1"
+	local ttyname="$2"
+	local username="$3"
+	local password="$4"
+	local allowedauth="$5"
+
+	# all auth types are allowed unless a user given list is given
+	local authopts
+	local pap=1
+	local chap=1
+	local mschap=1
+	local mschapv2=1
+	local eap=1
+
+	[ -n "$allowedauth" ] && {
+		pap=0 chap=0 mschap=0 mschapv2=0 eap=0
+		for auth in $allowedauth; do
+			case $auth in
+				"pap") pap=1 ;;
+				"chap") chap=1 ;;
+				"mschap") mschap=1 ;;
+				"mschapv2") mschapv2=1 ;;
+				"eap") eap=1 ;;
+				*) ;;
+			esac
+		done
+	}
+
+	[ $pap -eq 1 ] || append authopts "refuse-pap"
+	[ $chap -eq 1 ] || append authopts "refuse-chap"
+	[ $mschap -eq 1 ] || append authopts "refuse-mschap"
+	[ $mschapv2 -eq 1 ] || append authopts "refuse-mschap-v2"
+	[ $eap -eq 1 ] || append authopts "refuse-eap"
+
+	proto_run_command "${interface}" /usr/sbin/pppd \
+		"${ttyname}" \
+		115200 \
+		nodetach \
+		noaccomp \
+		nobsdcomp \
+		nopcomp \
+		novj \
+		noauth \
+		$authopts \
+		${username:+ user "$username"} \
+		${password:+ password "$password"} \
+		lcp-echo-failure 5 \
+		lcp-echo-interval 15 \
+		lock \
+		crtscts \
+		nodefaultroute \
+		usepeerdns \
+		ipparam "${interface}" \
+		ip-up-script /lib/netifd/ppp-up \
+		ip-down-script /lib/netifd/ppp-down
+}
+
+modemmanager_disconnected_method_ppp_ipv4() {
+	local interface="$1"
+
+	echo "running disconnection (ppp method)"
+
+	[ -n "${ERROR}" ] && {
+		local errorstring
+		errorstring=$(ppp_exitcode_tostring "${ERROR}")
+		case "$ERROR" in
+			0)
+				;;
+			2)
+				proto_notify_error "$interface" "$errorstring"
+				proto_block_restart "$interface"
+				;;
+			*)
+				proto_notify_error "$interface" "$errorstring"
+				;;
+		esac
+	} || echo "pppd result code not given"
+
+	proto_kill_command "$interface"
+}
+
+modemmanager_connected_method_dhcp_ipv4() {
+	local interface="$1"
+	local wwan="$2"
+	local metric="$3"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	proto_send_update "${interface}"
+
+	json_init
+	json_add_string name "${interface}_4"
+	json_add_string ifname "@${interface}"
+	json_add_string proto "dhcp"
+	proto_add_dynamic_defaults
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	json_close_object
+	ubus call network add_dynamic "$(json_dump)"
+}
+
+modemmanager_connected_method_static_ipv4() {
+	local interface="$1"
+	local wwan="$2"
+	local address="$3"
+	local prefix="$4"
+	local gateway="$5"
+	local mtu="$6"
+	local dns1="$7"
+	local dns2="$8"
+	local metric="$9"
+
+	local mask=""
+
+	[ -n "${address}" ] || {
+		proto_notify_error "${interface}" ADDRESS_MISSING
+		return
+	}
+
+	[ -n "${prefix}" ] || {
+		proto_notify_error "${interface}" PREFIX_MISSING
+		return
+	}
+	mask=$(cdr2mask "${prefix}")
+
+	[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	echo "adding IPv4 address ${address}, netmask ${mask}"
+	proto_add_ipv4_address "${address}" "${mask}"
+	[ -n "${gateway}" ] && {
+		echo "adding default IPv4 route via ${gateway}"
+		proto_add_ipv4_route "0.0.0.0" "0" "${gateway}" "${address}"
+	}
+	[ -n "${dns1}" ] && {
+		echo "adding primary DNS at ${dns1}"
+		proto_add_dns_server "${dns1}"
+	}
+	[ -n "${dns2}" ] && {
+		echo "adding secondary DNS at ${dns2}"
+		proto_add_dns_server "${dns2}"
+	}
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	proto_send_update "${interface}"
+}
+
+modemmanager_connected_method_dhcp_ipv6() {
+	local interface="$1"
+	local wwan="$2"
+	local metric="$3"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	proto_send_update "${interface}"
+
+	json_init
+	json_add_string name "${interface}_6"
+	json_add_string ifname "@${interface}"
+	json_add_string proto "dhcpv6"
+	proto_add_dynamic_defaults
+	json_add_string extendprefix 1 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	json_close_object
+	ubus call network add_dynamic "$(json_dump)"
+}
+
+modemmanager_connected_method_static_ipv6() {
+	local interface="$1"
+	local wwan="$2"
+	local address="$3"
+	local prefix="$4"
+	local gateway="$5"
+	local mtu="$6"
+	local dns1="$7"
+	local dns2="$8"
+	local metric="$9"
+
+	[ -n "${address}" ] || {
+		proto_notify_error "${interface}" ADDRESS_MISSING
+		return
+	}
+
+	[ -n "${prefix}" ] || {
+		proto_notify_error "${interface}" PREFIX_MISSING
+		return
+	}
+
+	[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	echo "adding IPv6 address ${address}, prefix ${prefix}"
+	proto_add_ipv6_address "${address}" "128"
+	proto_add_ipv6_prefix "${address}/${prefix}"
+	[ -n "${gateway}" ] && {
+		echo "adding default IPv6 route via ${gateway}"
+		proto_add_ipv6_route "${gateway}" "128"
+		proto_add_ipv6_route "::0" "0" "${gateway}" "" "" "${address}/${prefix}"
+	}
+	[ -n "${dns1}" ] && {
+		echo "adding primary DNS at ${dns1}"
+		proto_add_dns_server "${dns1}"
+	}
+	[ -n "${dns2}" ] && {
+		echo "adding secondary DNS at ${dns2}"
+		proto_add_dns_server "${dns2}"
+	}
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	proto_send_update "${interface}"
+}
+
+modemmanager_disconnected_method_common() {
+	local interface="$1"
+
+	echo "running disconnection (common)"
+
+	proto_init_update "*" 0
+	proto_send_update "${interface}"
+}
+
+proto_modemmanager_init_config() {
+	available=1
+	no_device=1
+	proto_config_add_string device
+	proto_config_add_string apn
+	proto_config_add_string 'allowedauth:list(string)'
+	proto_config_add_string username
+	proto_config_add_string password
+	proto_config_add_string allowedmode
+	proto_config_add_string preferredmode
+	proto_config_add_string pincode
+	proto_config_add_string iptype
+	proto_config_add_string plmn
+	proto_config_add_int signalrate
+	proto_config_add_boolean lowpower
+	proto_config_add_boolean allow_roaming
+	proto_config_add_defaults
+}
+
+# Append param to the global 'connectargs' variable.
+append_param() {
+	local param="$1"
+
+	[ -z "$param" ] && return
+	[ -z "$connectargs" ] || connectargs="${connectargs},"
+	connectargs="${connectargs}${param}"
+}
+
+modemmanager_set_allowed_mode() {
+	local device="$1"
+	local interface="$2"
+	local allowedmode="$3"
+
+	echo "setting allowed mode to '${allowedmode}'"
+	mmcli --modem="${device}" --set-allowed-modes="${allowedmode}" || {
+		proto_notify_error "${interface}" MM_INVALID_ALLOWED_MODES_LIST
+		proto_block_restart "${interface}"
+		return 1
+	}
+}
+
+modemmanager_set_preferred_mode() {
+	local device="$1"
+	local interface="$2"
+	local allowedmode="$3"
+	local preferredmode="$4"
+
+	[ -z "${preferredmode}" ] && {
+		echo "no preferred mode configured"
+		proto_notify_error "${interface}" MM_NO_PREFERRED_MODE_CONFIGURED
+		proto_block_restart "${interface}"
+		return 1
+	}
+
+	[ -z "${allowedmode}" ] && {
+		echo "no allowed mode configured"
+		proto_notify_error "${interface}" MM_NO_ALLOWED_MODE_CONFIGURED
+		proto_block_restart "${interface}"
+		return 1
+	}
+
+	echo "setting preferred mode to '${preferredmode}' (${allowedmode})"
+	mmcli --modem="${device}" \
+		--set-preferred-mode="${preferredmode}" \
+		--set-allowed-modes="${allowedmode}" || {
+		proto_notify_error "${interface}" MM_FAILED_SETTING_PREFERRED_MODE
+		proto_block_restart "${interface}"
+		return 1
+	}
+}
+
+proto_modemmanager_setup() {
+	local interface="$1"
+
+	local modempath modemstatus bearercount bearerpath connectargs bearerstatus beareriface
+	local bearermethod_ipv4 bearermethod_ipv6 auth cliauth
+	local operatorname operatorid registration accesstech signalquality
+	local allowedmode preferredmode
+
+	local device apn allowedauth username password pincode
+	local iptype plmn metric signalrate allow_roaming
+
+	local address prefix gateway mtu dns1 dns2
+
+	json_get_vars device apn allowedauth username password
+	json_get_vars pincode iptype plmn metric signalrate allow_roaming
+	json_get_vars allowedmode preferredmode
+
+	# validate sysfs path given in config
+	[ -n "${device}" ] || {
+		echo "No device specified"
+		proto_notify_error "${interface}" NO_DEVICE
+		proto_set_available "${interface}" 0
+		return 1
+	}
+
+	# validate that ModemManager is handling the modem at the sysfs path
+	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
+	modempath=$(modemmanager_get_field "${modemstatus}" "modem.dbus-path")
+	[ -n "${modempath}" ] || {
+		echo "Device not managed by ModemManager"
+		proto_notify_error "${interface}" DEVICE_NOT_MANAGED
+		proto_set_available "${interface}" 0
+		return 1
+	}
+	echo "modem available at ${modempath}"
+
+	[ -z "${allowedmode}" ] || {
+		case "$allowedmode" in
+			"2g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "2g"
+				;;
+			"3g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "3g"
+				;;
+			"4g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "4g"
+				;;
+			"5g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "5g"
+				;;
+			*)
+				modemmanager_set_preferred_mode "$device" \
+					"$interface" "${allowedmode}" "${preferredmode}"
+				;;
+		esac
+		# check error for allowed_mode and preferred_mode function call
+		[ "$?" -ne "0" ] && return 1
+	}
+
+	# always cleanup before attempting a new connection, just in case
+	modemmanager_cleanup_connection "${modemstatus}"
+
+	# if allowedauth list given, build option string
+	for auth in $allowedauth; do
+		cliauth="${cliauth}${cliauth:+|}$auth"
+	done
+
+	# setup connect args; APN mandatory (even if it may be empty)
+	echo "starting connection with apn '${apn}'..."
+	proto_notify_error "${interface}" MM_CONNECT_IN_PROGRESS
+
+	# setup allow-roaming parameter
+	if [ -n "${allow_roaming}" ] && [ "${allow_roaming}" -eq 0 ];then
+		allow_roaming="no"
+	else
+		# allowed unless a user set the opposite
+		allow_roaming="yes"
+	fi
+
+	# Append options to 'connectargs' variable
+	append_param "apn=${apn}"
+	append_param "allow-roaming=${allow_roaming}"
+	append_param "${iptype:+ip-type=${iptype}}"
+	append_param "${plmn:+operator-id=${plmn}}"
+	append_param "${cliauth:+allowed-auth=${cliauth}}"
+	append_param "${username:+user=${username}}"
+	append_param "${password:+password=${password}}"
+	append_param "${pincode:+pin=${pincode}}"
+
+	mmcli --modem="${device}" --timeout 120 --simple-connect="${connectargs}" || {
+		proto_notify_error "${interface}" MM_CONNECT_FAILED
+		proto_block_restart "${interface}"
+		return 1
+	}
+
+	# check if Signal refresh rate is set
+	if [ -n "${signalrate}" ] && [ "${signalrate}" -eq "${signalrate}" ] 2>/dev/null; then
+		echo "setting signal refresh rate to ${signalrate} seconds"
+		mmcli --modem="${device}" --signal-setup="${signalrate}"
+	else
+		echo "signal refresh rate is not set"
+	fi
+
+	# log additional useful information
+	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
+	operatorname=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-name")
+	[ -n "${operatorname}" ] && echo "network operator name: ${operatorname}"
+	operatorid=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-code")
+	[ -n "${operatorid}" ] && echo "network operator MCCMNC: ${operatorid}"
+	registration=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.registration-state")
+	[ -n "${registration}" ] && echo "registration type: ${registration}"
+	accesstech=$(modemmanager_get_multivalue_field "${modemstatus}" "modem.generic.access-technologies")
+	[ -n "${accesstech}" ] && echo "access technology: ${accesstech}"
+	signalquality=$(modemmanager_get_field "${modemstatus}" "modem.generic.signal-quality.value")
+	[ -n "${signalquality}" ] && echo "signal quality: ${signalquality}%"
+
+	# we won't like it if there are more than one bearers, as that would mean the
+	# user manually created them, and that's unsupported by this proto
+	bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
+	[ -n "${bearercount}" ] && [ "$bearercount" -eq 1 ] || {
+		proto_notify_error "${interface}" INVALID_BEARER_LIST
+		return 1
+	}
+
+	# load connected bearer information
+	bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
+	bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
+
+	# load network interface and method information
+	beareriface=$(modemmanager_get_field "${bearerstatus}" "bearer.status.interface")
+	bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
+	bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
+
+	# setup IPv4
+	[ -n "${bearermethod_ipv4}" ] && {
+		echo "IPv4 connection setup required in interface ${interface}: ${bearermethod_ipv4}"
+		case "${bearermethod_ipv4}" in
+		"dhcp")
+			modemmanager_connected_method_dhcp_ipv4 "${interface}" "${beareriface}" "${metric}"
+			;;
+		"static")
+			address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.address")
+			prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.prefix")
+			gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.gateway")
+			mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.mtu")
+			dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[1\]")
+			dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[2\]")
+			modemmanager_connected_method_static_ipv4 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}"
+			;;
+		"ppp")
+			modemmanager_connected_method_ppp_ipv4 "${interface}" "${beareriface}" "${username}" "${password}" "${allowedauth}"
+			;;
+		*)
+			proto_notify_error "${interface}" UNKNOWN_METHOD
+			return 1
+			;;
+		esac
+	}
+
+	# setup IPv6
+	# note: if using ipv4v6, both IPv4 and IPv6 settings will have the same MTU and metric values reported
+	[ -n "${bearermethod_ipv6}" ] && {
+		echo "IPv6 connection setup required in interface ${interface}: ${bearermethod_ipv6}"
+		case "${bearermethod_ipv6}" in
+		"dhcp")
+			modemmanager_connected_method_dhcp_ipv6 "${interface}" "${beareriface}" "${metric}"
+			;;
+		"static")
+			address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.address")
+			prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.prefix")
+			gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.gateway")
+			mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.mtu")
+			dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[1\]")
+			dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[2\]")
+			modemmanager_connected_method_static_ipv6 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}"
+			;;
+		"ppp")
+			proto_notify_error "${interface}" "unsupported method"
+			return 1
+			;;
+		*)
+			proto_notify_error "${interface}" UNKNOWN_METHOD
+			return 1
+			;;
+		esac
+	}
+
+	return 0
+}
+
+proto_modemmanager_teardown() {
+	local interface="$1"
+
+	local modemstatus bearerpath errorstring
+	local bearermethod_ipv4 bearermethod_ipv6
+
+	local device lowpower iptype
+	json_get_vars device lowpower iptype
+
+	echo "stopping network"
+
+	# load connected bearer information, just the first one should be ok
+	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
+	bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
+	[ -n "${bearerpath}" ] || {
+		echo "couldn't load bearer path: disconnecting anyway"
+		mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
+		return
+	}
+
+	# load bearer connection methods
+	bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
+	bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
+	[ -n "${bearermethod_ipv4}" ] &&
+		echo "IPv4 connection teardown required in interface ${interface}: ${bearermethod_ipv4}"
+	bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
+	[ -n "${bearermethod_ipv6}" ] &&
+		echo "IPv6 connection teardown required in interface ${interface}: ${bearermethod_ipv6}"
+
+	# disconnection handling only requires special treatment in IPv4/PPP
+	[ "${bearermethod_ipv4}" = "ppp" ] && modemmanager_disconnected_method_ppp_ipv4 "${interface}"
+	modemmanager_disconnected_method_common "${interface}"
+
+	# disconnect
+	mmcli --modem="${device}" --simple-disconnect ||
+		proto_notify_error "${interface}" DISCONNECT_FAILED
+
+	# disable
+	mmcli --modem="${device}" --disable
+
+	# low power, only if requested
+	[ "${lowpower:-0}" -lt 1 ] ||
+		mmcli --modem="${device}" --set-power-state-low
+
+	proto_init_update "*" 0
+	proto_send_update "$interface"
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol modemmanager
+}

feeds/ucentral/modemmanager/files/usr/sbin/ModemManager-wrapper

@@ -0,0 +1,33 @@
+#!/bin/sh
+
+trap_with_arg() {
+	func="$1" ; shift
+	for sig ; do
+		# shellcheck disable=SC2064
+		trap "$func $sig" "$sig"
+	done
+}
+
+func_trap() {
+	logger "ModemManager-wrapper[$$]" "Sending signal ${1}..."
+	kill "-${1}" "$CHILD" 2>/dev/null
+}
+
+main() {
+	. /usr/share/ModemManager/modemmanager.common
+
+	trap_with_arg func_trap INT TERM KILL
+
+	mkdir -p "${MODEMMANAGER_RUNDIR}"
+	chmod 0755 "${MODEMMANAGER_RUNDIR}"
+	mm_cleanup_interfaces
+
+	/usr/sbin/ModemManager "$@" 1>/dev/null 2>/dev/null &
+	CHILD="$!"
+
+	mm_report_events_from_cache
+
+	wait "$CHILD"
+}
+
+main "$@"

feeds/ucentral/poe/Makefile

@@ -0,0 +1,42 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=poe
+PKG_VERSION:=1.0
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_ipq50xx_generic_DEVICE_sonicfi_rap630w_311g),y)
+TARGET_CFLAGS += -DPLATFORM_EWW631_B1=1
+endif
+
+define Package/poe
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=Turn on/off PoE ports with TSP23861 chipset
+	DEPENDS:= +libubox +libubus +libuci +libi2c
+endef
+
+define Package/poe/description
+  Turn on/off PoE ports
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+
+define Package/poe/install
+	$(INSTALL_DIR) $(1)
+	$(INSTALL_DIR) $(1)/etc/config $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/poe.init $(1)/etc/init.d/poe
+	$(INSTALL_BIN) ./files/poe.config $(1)/etc/config/poe
+
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tps23861-poe-ctrl $(1)/usr/bin
+endef
+
+$(eval $(call BuildPackage,poe))

feeds/ucentral/poe/files/poe.init

@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+
+START=10
+
+tps23861_poe_ctrl () {
+	local section="$1"
+	local num mode
+	config_get num "$section" port_num
+	config_get mode "$section" admin_mode
+	
+	if [ "$mode" == "1" ]; then
+		output=$(tps23861-poe-ctrl -p "${num}" -P on)
+		echo "<6>${output}" > "/dev/kmsg"
+	else
+		output=$(tps23861-poe-ctrl -p "${num}" -P off)
+		echo "<6>${output}" > "/dev/kmsg"
+	fi
+}
+
+start(){
+	. /lib/functions.sh
+	
+	board=$(board_name)
+	case $board in
+	sonicfi,rap630w-311g|\
+	cybertan,eww631-b1)
+		config_load poe
+		config_foreach tps23861_poe_ctrl port
+		;;
+	*)
+		;;
+	esac
+}

feeds/ucentral/poe/src/Makefile

@@ -0,0 +1,26 @@
+CFLAGS += -Wall -g
+
+INCLUDES =
+
+LDFLAGS = -lubus -lubox -li2c
+
+LIBS = 
+
+SRCS = tps23861-poe-ctrl.c \
+
+OBJS = $(SRCS:.c=.o)
+
+MAIN = tps23861-poe-ctrl
+
+
+all:   $(MAIN) 
+
+$(MAIN): $(OBJS)
+	$(CC) $(CFLAGS) $(INCLUDES) -o $(MAIN) $(OBJS) $(LDFLAGS) $(LIBS)
+	
+.c.o:
+	$(CC) $(CFLAGS) $(INCLUDES) -c $<  -o $@
+
+clean:
+	$(RM) *.o *~ $(MAIN) $(TEST)
+

feeds/ucentral/poe/src/tps23861-poe-ctrl.c

@@ -0,0 +1,215 @@
+/*
+ * User-space daemon formonitoring and managing PoE ports with
+ * TI TPS23861 chips. based on the Linux Kernel TPS23861
+ * HWMON driver.
+*/
+
+#include <stdio.h>		/* Standard input/output definitions */
+#include <string.h>		/* String function definitions */
+#include <unistd.h>		/* UNIX standard function definitions */
+#include <fcntl.h>		/* File control definitions */
+#include <errno.h>		/* Error number definitions */
+#include <sys/ioctl.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>  /* uapi/linux/i2c-dev.h */
+
+#include <libubox/ulog.h>
+
+#define TPS23861_I2C_ADDR				0x20
+#define DETECT_CLASS_RESTART			0x18
+#define POWER_ENABLE					0x19
+#define POWER_ON_SHIFT					0
+#define POWER_OFF_SHIFT					4
+
+typedef unsigned char	u8;
+
+#if defined(PLATFORM_EWW631_B1)
+#define TPS23861_NUM_PORTS				1
+#endif
+
+#define CONVERT_PORT_NUM(x)				(1 << ((u8)x-1))
+
+unsigned int  PORT_POWER_STATUS[TPS23861_NUM_PORTS];
+
+int i2c_handler = -1;
+#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
+
+int open_device(void)
+{
+	int fd, fset;
+
+	fd = open("/dev/i2c-0", O_RDWR);
+	fset = fcntl(fd, F_SETFL, 0);
+	if (fset < 0)
+		printf("fcntl failed!\n");
+
+	//if (isatty(STDIN_FILENO) == 0)
+	//	printf("standard input is not a terminal device\n");
+
+	return fd;
+}
+
+int access_salve(int fd)
+{
+	int ret;
+
+	if((ret = ioctl(fd, I2C_SLAVE, TPS23861_I2C_ADDR)) < 0)
+	{
+		printf("%s: Failed to access slave bus[%s]\n",__func__, strerror(errno));
+		return -1;
+	}
+	return(ret);
+}
+
+// Write to an I2C slave device's register:
+int i2c_write(u8 slave_addr, u8 reg, u8 data)
+{
+	u8 outbuf[2];
+
+	struct i2c_msg msgs[1];
+	struct i2c_rdwr_ioctl_data msgset[1];
+
+	outbuf[0] = reg;
+	outbuf[1] = data;
+
+	msgs[0].addr = slave_addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 2;
+	msgs[0].buf = outbuf;
+
+	msgset[0].msgs = msgs;
+	msgset[0].nmsgs = 1;
+
+	if (ioctl(i2c_handler, I2C_RDWR, &msgset) < 0) {
+		perror("ioctl(I2C_RDWR) in i2c_write");
+		return -1;
+	}
+
+	return 0;
+}
+
+void poe_set_PowerOnOff(u8 port, u8 on_off) {
+	u8 value;
+	u8 portBit;
+	portBit = CONVERT_PORT_NUM(port+1);
+
+	if(on_off == 0) {
+		value = (portBit << POWER_OFF_SHIFT);
+		PORT_POWER_STATUS[port] = 0;
+	} else {
+		value = (portBit << POWER_ON_SHIFT);
+		PORT_POWER_STATUS[port] = 1;
+	}
+
+	ULOG_DBG("set Port%d Power Status [%d] portBit 0x[%x] value 0x[%x]\n", port+1, PORT_POWER_STATUS[port], portBit, value);
+
+	if(i2c_write(TPS23861_I2C_ADDR, POWER_ENABLE, value) < 0)
+	{
+		ULOG_ERR("Set port%d power on-off error (0x19)\n", port);
+	}
+}
+
+void RestartPortDetectClass(u8 port)
+{
+	u8 value;
+
+	value = (1 << port) | (1 << (port + 4));
+	ULOG_DBG("RestartPortDetectClass value 0x%x\n", value);
+	if(i2c_write(TPS23861_I2C_ADDR, DETECT_CLASS_RESTART, value) < 0) {
+			ULOG_ERR("Set port%d detection and class on error\n",port);
+	}
+}
+
+int usage(const char *progname)
+{
+	fprintf(stderr, "Usage: %s -p <1-3> -P <on|off> [options]\n"
+			"Required options:\n"
+			"  -p <1-3>:           Select port number (Only port 1 is supported)\n"
+			"  -P <on|off>:        Set PSE function state <on|off>\n"
+			"Optional options:\n"
+			"  -d                  Enable debug mode\n"
+			"\n", progname);
+	return 1;
+}
+
+static int setPSE(int port ,char *optarg)
+{
+	int ret = 0;
+	i2c_handler = open_device();
+	if (i2c_handler < 0) {
+		ULOG_ERR("open i2c-0 device error!\n");
+		goto EXIT;
+	}
+
+	ret = access_salve(i2c_handler);
+	if (ret < 0)
+	{
+		ULOG_ERR("The i2c-0 access error\n");
+		goto EXIT;
+	}
+
+	if(!strncmp("on", optarg, 2)) {
+		printf("Enable port%d PSE function\n", port);
+		RestartPortDetectClass(port-1);
+	}
+	else if (!strncmp("off", optarg, 3)) {
+		printf("Disable port%d PSE function\n", port);
+		poe_set_PowerOnOff(port-1, 0);
+	}
+	else {
+		ULOG_ERR("[Set] Do not accept this optarg!!!\n");
+		ret = 1;
+	}
+EXIT:
+	close(i2c_handler);
+	return ret;
+}
+
+int main(int argc, char *argv[])
+{
+	int ch, ret = 0, port = 0;
+	char *PSE = NULL;
+	if (argc == 1) {
+		return usage(argv[0]);
+	}
+
+
+	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "tps23861");
+	ulog_threshold(LOG_INFO);
+
+	while ((ch = getopt(argc, argv, "dp:P:")) != -1) {
+		switch (ch) {
+		case 'd':
+			printf("tps23861-i2c-control ulog_threshold set to debug level\n");
+			ulog_threshold(LOG_DEBUG);
+			break;
+
+		case 'p':
+			port = atoi(optarg);
+			break;
+
+		case 'P':
+			PSE = optarg;
+			break;
+
+		default:
+			ret = usage(argv[0]);
+			break;
+		}
+	}
+
+	if (port < 1 || port > 3) {
+		ret = usage(argv[0]);
+	}
+	else {
+		if (PSE) {
+			setPSE(port, PSE);
+		}
+		else {
+			ret = usage(argv[0]);
+		}
+	}
+
+	return ret;
+
+}

feeds/ucentral/ucentral-client/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=20d0573e5460ae9780307ab9d54234bb75d3b98fb36806f896819918087b14df
+PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2024-10-20
-PKG_SOURCE_VERSION:=8c45f965c30d1cf11e3a5a625a5e2baf3178697f
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/init.d/ucentral

@@ -44,14 +44,15 @@ start_service() {
 
 	server=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["server"]')
 	port=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["port"]')
+	[ -n "$server" -a -n "$port" ] || return 0
 
 	boot_cause=$(cat /tmp/pstore | jsonfilter -e '@["pstore"][-1]'.boot_cause)
 	[ -z $boot_cause ] && boot_cause=coldboot
 	procd_open_instance
 	procd_set_param command "$PROG"
 	[ -n "$serial" ] && procd_append_param command -S $serial
-	[ -n "$server" ] && procd_append_param command -s $server
-	[ -n "$port" ] && procd_append_param command -P $port
+	procd_append_param command -s $server
+	procd_append_param command -P $port
 	[ "$debug" -eq 0 ] || procd_append_param command -d
 	[ "$insecure" -eq 0 ] || procd_append_param command -i
 	[ -z "$(mount | grep 'tmpfs on / type tmpfs')" ] || procd_append_param command -r

feeds/ucentral/ucentral-event/files/ucentral-event

@@ -280,6 +280,21 @@ handlers = {
 	},
 
 	vlan_remove: function(notify) {
+		for (let wan in wan_ports) {
+			let msg = {
+				name: wan,
+				vlan: [ `${notify.data.vlan_id}:t` ]
+			};
+			ubus.call('network.interface.up_none', 'remove_device', msg);
+		}
+
+		let msg = {
+			name: notify.data.ifname,
+			'link-ext': true,
+			vlan: [ `${notify.data.vlan_id}:u` ]
+		};
+		ubus.call('network.interface.up_none', 'remove_device', msg);
+
 		if (ratelimit) {
 			let msg = {
 				device: notify.data.ifname,

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=aac8731d564f4ccd85a366417b9a02c1d3de9b6533d1474b58768249c50707f1
+PKG_MIRROR_HASH:=1ad9f7b5d5d1145e3aed14937eef60d6794d821e0244cc8fa824400d3da47f5a
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-06-27
-PKG_SOURCE_VERSION:=125a148764c9ef7a02086b6fadccd7b96bfdf591
+PKG_SOURCE_DATE:=2025-07-11
+PKG_SOURCE_VERSION:=5276d0b8b6e83ab57354b0bcbb820de83a91ab88
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-schema/files/etc/uci-defaults/99-ucentral-poe

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+board=$(board_name)
+case $board in
+	sonicfi,rap630w-311g|\
+	cybertan,eww631-b1)
+		for num in $(seq 1 3)
+		do
+			uci add poe port
+			uci set poe.@port[-1]='port'
+			eval uci set poe.@port[-1].port_num='${num}'
+			uci set poe.@port[-1].admin_mode='1'
+		done
+		uci commit
+		;;
+	*)
+		;;
+esac

feeds/ucentral/udevmand/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=https://github.com/blogic/udevmand.git
-PKG_MIRROR_HASH:=b643cae7315b6bc92262b9b632fe39bd9f766525a5fb69e8a8a5c37f4e26867b
-PKG_SOURCE_DATE:=20241219
-PKG_SOURCE_VERSION:=be0f45e7bcf6bad8143222c541c3d077bdadbecc
+PKG_MIRROR_HASH:=6f6a5536656a64e1f38f03747ef06ab03b28ef797adc72a901eb7dbc6e45e496
+PKG_SOURCE_DATE:=20250704
+PKG_SOURCE_VERSION:=e56be31d7c341467cc26714dac5c6b450a612808
 CMAKE_INSTALL:=1
 
 PKG_LICENSE:=LGPL-2.1

patches/0029-netifd-Support-DHCP-option-138-and-store-values-in-t.patch

@@ -1,93 +0,0 @@
-From e4ad9777fae3bb3a71988fa738f16cb8d6884d7e Mon Sep 17 00:00:00 2001
-From: Tanya Singh <tanya_singh@accton.com>
-Date: Tue, 28 Jun 2022 17:11:52 +0800
-Subject: [PATCH 29/68] netifd: Support DHCP option 138 and store values in
- /tmp/capwap/dhcp_opt.txt
-
-Signed-off-by: Tanya Singh <tanya_singh@accton.com>
----
- .../netifd/files/lib/netifd/dhcp.script       | 22 +++++++++++++++++++
- .../netifd/files/lib/netifd/proto/dhcp.sh     |  1 +
- .../busybox/patches/531-dhcp_opt_capwap.patch | 18 +++++++++++++++
- 3 files changed, 41 insertions(+)
- create mode 100644 package/utils/busybox/patches/531-dhcp_opt_capwap.patch
-
-diff --git a/package/network/config/netifd/files/lib/netifd/dhcp.script b/package/network/config/netifd/files/lib/netifd/dhcp.script
-index 6fcf139beb..29de85f221 100755
---- a/package/network/config/netifd/files/lib/netifd/dhcp.script
-+++ b/package/network/config/netifd/files/lib/netifd/dhcp.script
-@@ -4,6 +4,24 @@
- . /lib/functions.sh
- . /lib/netifd/netifd-proto.sh
- 
-+WORKING_PATH=/tmp/capwap
-+DHCP_OPT_FILE=${WORKING_PATH}/dhcp_opt.txt
-+DHCP_OPT_FILE_TMP=${WORKING_PATH}/dhcp_opt_tmp.txt
-+
-+set_capwap_ip()
-+{
-+	local ip
-+	if [ ! -d "${WORKING_PATH}" ]; then
-+		mkdir -p ${WORKING_PATH}
-+	fi
-+	for ip in ${capwap}; do
-+		echo -n ${ip} >> ${DHCP_OPT_FILE_TMP}
-+	done
-+	if ! cmp -s "${DHCP_OPT_FILE}" "${DHCP_OPT_FILE_TMP}"; then
-+		mv ${DHCP_OPT_FILE_TMP} ${DHCP_OPT_FILE}
-+	fi
-+}
-+
- set_classless_routes() {
- 	local max=128
- 	while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do
-@@ -111,6 +129,10 @@ case "$1" in
- 	;;
- esac
- 
-+if [ -n "${capwap}" ]; then
-+	set_capwap_ip
-+fi
-+
- # user rules
- [ -f /etc/udhcpc.user ] && . /etc/udhcpc.user "$@"
- for f in /etc/udhcpc.user.d/*; do
-diff --git a/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh b/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh
-index 636b4654ff..18a9aaf2a3 100755
---- a/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh
-+++ b/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh
-@@ -61,6 +61,7 @@ proto_dhcp_setup() {
- 	[ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
- 	# Request classless route option (see RFC 3442) by default
- 	[ "$classlessroute" = "0" ] || append dhcpopts "-O 121"
-+	append dhcpopts "-O 138"
- 
- 	proto_export "INTERFACE=$config"
- 	proto_run_command "$config" udhcpc \
-diff --git a/package/utils/busybox/patches/531-dhcp_opt_capwap.patch b/package/utils/busybox/patches/531-dhcp_opt_capwap.patch
-new file mode 100644
-index 0000000000..6c60159555
---- /dev/null
-+++ b/package/utils/busybox/patches/531-dhcp_opt_capwap.patch
-@@ -0,0 +1,18 @@
-+--- a/networking/udhcp/common.c	2022-06-28 09:32:48.853072914 +0800
-++++ b/networking/udhcp/common.c	2022-06-28 09:39:28.000000000 +0800
-+@@ -54,6 +54,7 @@
-+ 	{ OPTION_STRING                           , 0x43 }, /* DHCP_BOOT_FILE     */
-+ //TODO: not a string, but a set of LASCII strings:
-+ //	{ OPTION_STRING                           , 0x4D }, /* DHCP_USER_CLASS    */
-++	{ OPTION_IP	| OPTION_LIST				  , 0x8A }, /* DHCP_CAPWAP       */
-+ 	{ OPTION_STRING                           , 0x64 }, /* DHCP_PCODE         */
-+ 	{ OPTION_STRING                           , 0x65 }, /* DHCP_TCODE         */
-+ #if ENABLE_FEATURE_UDHCP_RFC3397
-+@@ -123,6 +124,7 @@
-+ 	"tftp" "\0"             /* DHCP_TFTP_SERVER_NAME*/
-+ 	"bootfile" "\0"         /* DHCP_BOOT_FILE       */
-+ //	"userclass" "\0"        /* DHCP_USER_CLASS      */
-++	"capwap" "\0"      		/* DHCP_CAPWAP		*/
-+ 	"tzstr" "\0"            /* DHCP_PCODE           */
-+ 	"tzdbstr" "\0"          /* DHCP_TCODE           */
-+ #if ENABLE_FEATURE_UDHCP_RFC3397
--- 
-2.34.1
-

patches/0090-netifd-add-gcmp-256-as-a-cipher-suite-when-SAE-is-en.patch

@@ -1,59 +0,0 @@
-From 6866492b26cf59d5557d1ea0fdae24834410afff Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Wed, 11 Jun 2025 14:24:48 +0200
-Subject: [PATCH] netifd: add gcmp-256 as a cipher suite when SAE is enabled on
- HE/EHT
-
-Fixes: WIFI-14594
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../config/netifd/patches/200-gcmp-256.patch  | 37 +++++++++++++++++++
- 1 file changed, 37 insertions(+)
- create mode 100644 package/network/config/netifd/patches/200-gcmp-256.patch
-
-diff --git a/package/network/config/netifd/patches/200-gcmp-256.patch b/package/network/config/netifd/patches/200-gcmp-256.patch
-new file mode 100644
-index 0000000000..defe66a816
---- /dev/null
-+++ b/package/network/config/netifd/patches/200-gcmp-256.patch
-@@ -0,0 +1,37 @@
-+--- a/scripts/netifd-wireless.sh
-++++ b/scripts/netifd-wireless.sh
-+@@ -39,11 +39,10 @@ prepare_key_wep() {
-+ }
-+ 
-+ _wdev_prepare_channel() {
-+-	json_get_vars channel band hwmode
-++	json_get_vars channel band hwmode htmode
-+ 
-+ 	auto_channel=0
-+ 	enable_ht=0
-+-	htmode=
-+ 	hwmode="${hwmode##11}"
-+ 
-+ 	case "$channel" in
-+@@ -80,6 +79,11 @@ _wdev_prepare_channel() {
-+ 			esac
-+ 		;;
-+ 	esac
-++
-++	case "$htmode" in
-++		HE*|EHT*) wpa3_cipher="GCMP-256 ";;
-++		*) wpa3_cipher="";;
-++	esac
-+ }
-+ 
-+ _wdev_handler() {
-+@@ -216,6 +220,9 @@ wireless_vif_parse_encryption() {
-+ 		wpa_cipher="GCMP"
-+ 	else
-+ 		wpa_cipher="CCMP"
-++		case "$encryption" in
-++			sae*|wpa3*|psk3*|owe) wpa_cipher="${wpa3_cipher}$wpa_cipher";;
-++		esac
-+ 	fi
-+ 
-+ 	case "$encryption" in
--- 
-2.34.1
-

patches/0091-fwtool-check-for-EST-support-if-the-cert-was-issued-.patch

@@ -0,0 +1,43 @@
+From 8e70ae7c71fb0a31b3b95f156b2d865ba8a07ae8 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Fri, 13 Jun 2025 12:06:48 +0200
+Subject: [PATCH] fwtool: check for EST support if the cert was issued by insta
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ include/image-commands.mk                      | 3 ++-
+ package/base-files/files/lib/upgrade/fwtool.sh | 4 ++++
+ 2 files changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/include/image-commands.mk b/include/image-commands.mk
+index d3c9cea293..b7a0d98d3d 100644
+--- a/include/image-commands.mk
++++ b/include/image-commands.mk
+@@ -85,7 +85,8 @@ metadata_json = \
+ 			"revision": "$(call json_quote,$(REVISION))", \
+ 			"target": "$(call json_quote,$(TARGETID))", \
+ 			"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
+-		} \
++		}, \
++		"est_supported": 1 \
+ 	}'
+ 
+ define Build/append-metadata
+diff --git a/package/base-files/files/lib/upgrade/fwtool.sh b/package/base-files/files/lib/upgrade/fwtool.sh
+index 8bd00a3332..a84eb96baf 100644
+--- a/package/base-files/files/lib/upgrade/fwtool.sh
++++ b/package/base-files/files/lib/upgrade/fwtool.sh
+@@ -51,6 +51,10 @@ fwtool_check_image() {
+ 	json_get_var compatmessage compat_message
+ 	[ -n "$imagecompat" ] || imagecompat="1.0"
+ 
++	if ! est_client fwtool; then
++		return 1
++	fi
++
+ 	# select correct supported list based on compat_version
+ 	# (using this ensures that compatibility check works for devices
+ 	#  not knowing about compat-version)
+-- 
+2.34.1
+

patches/0092-ubus-bump-to-latest-HEAD.patch

@@ -0,0 +1,30 @@
+From 2630ee161ad4d5981d98ee8cf0b7be3832b32ee8 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 3 Jul 2025 09:20:03 +0200
+Subject: [PATCH] ubus: bump to latest HEAD
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ package/system/ubus/Makefile | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/package/system/ubus/Makefile b/package/system/ubus/Makefile
+index 82c4dc601a..ea536930ea 100644
+--- a/package/system/ubus/Makefile
++++ b/package/system/ubus/Makefile
+@@ -5,9 +5,9 @@ PKG_RELEASE:=1
+ 
+ PKG_SOURCE_PROTO:=git
+ PKG_SOURCE_URL=$(PROJECT_GIT)/project/ubus.git
+-PKG_SOURCE_DATE:=2023-06-05
+-PKG_SOURCE_VERSION:=f787c97b34894a38b15599886cacbca01271684f
+-PKG_MIRROR_HASH:=f4e898eb9207f069652f1767835f6aa9f015df2282d51e50ab57a0c3736f36e3
++PKG_SOURCE_DATE:=2025-07-02
++PKG_SOURCE_VERSION:=5952b48e251c0ea76dfce97f129da6f18d889eda
++PKG_MIRROR_HASH:=3285485a4d9d0e62e4abcfb004d2be0bec7b5ebc564c68030be0c35f0bc223c4
+ PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
+ CMAKE_INSTALL:=1
+ 
+-- 
+2.34.1
+

profiles/cig_wf189.yml

@@ -13,3 +13,6 @@ packages:
   - ipq53xx
   - ftm
   - qca-ssdk-shell
+  - iperf3
+  - sysstat
+  - kmod-cig-poe-judgment 

profiles/cig_wf189h.yml

@@ -12,3 +12,6 @@ include:
 packages:
   - ipq53xx
   - qca-ssdk-shell
+  - iperf3
+  - sysstat
+  - kmod-cig-poe-judgment