cloud_discovery: use the correct certificte for CDS

Fixes: WIFI-14694
Signed-off-by: John Crispin <john@phrozen.org>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'zyxel_nwa50be', 'sercomm_ap72tip-v4' ]
+        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/morse/netifd-morse/lib/netifd/wireless/morse.sh

@@ -832,13 +832,6 @@ morse_hostapd_add_bss(){
 	morse_override_hostapd_set_bss_options hostapd_cfg "$_phy" "$vif" || return 1
 	json_get_vars wds wds_bridge sae_pwe dtim_period max_listen_int start_disabled
 
-	local network_config network_values
-	json_get_values network_values network
-	network_config=$(echo "$network_values" | cut -d' ' -f1)
-
-	if [ "$wds" -gt 0 ] && [ -z "$wds_bridge" ]; then
-		wds_bridge="${network_config%%[0-9]*}"
-	fi
 
 	raw_block=
 	json_for_each_item morse_hostapd_add_raw raws

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -88,11 +88,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for NWA130BE
 endef
 
-define Package/ath12k-wifi-zyxel-nwa50be
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for NWA50BE
-endef
-
 define Package/ath12k-wifi-cig-wf672
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF672
@@ -184,13 +179,6 @@ define Package/ath12k-wifi-zyxel-nwa130be/install
 	$(INSTALL_DATA) ./board-2.bin.nwa130be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
-define Package/ath12k-wifi-zyxel-nwa50be/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.nwa130be.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.nwa130be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
 define Package/ath12k-wifi-cig-wf672/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -209,5 +197,4 @@ $(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))
 $(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa130be))
-$(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa50be))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf672))

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/Makefile

@@ -1,25 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=cig-poe-judgment
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/cig-poe-judgment
-  SUBMENU:=Other modules
-  TITLE:=CIG POE judgment
-  FILES:=$(PKG_BUILD_DIR)/cig_poe_judgment.ko
-  AUTOLOAD:=$(call AutoLoad,99,cig_poe_judgment)
-endef
-
-define KernelPackage/cig-poe-judgment/description
-  Find POE type
-endef
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
-endef
-
-$(eval $(call KernelPackage,cig-poe-judgment))

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/Makefile

@@ -1 +0,0 @@
-obj-m += cig_poe_judgment.o

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/cig_poe_judgment.c

@@ -1,252 +0,0 @@
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/proc_fs.h>
-#include <linux/kthread.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqreturn.h>
-#include <linux/of_gpio.h>
-#include <linux/err.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/uaccess.h>
-
-#define GPIO_MAX 		8 
-#define INT_MODE_MASK 		0xf0
-#define DETECT_MODE1	 	0x3
-#define DETECT_MODE2	 	0x4
-
-enum POE_TYPE {
-	POE_TYPE_AT = 1,
-	POE_TYPE_AF,
-	POE_TYPE_BT,
-	POE_TYPE_DC,
-	POE_TYPE_MAX
-};
-
-struct poe_irq_data
-{
-	struct device *dev;
-	int irq;
-	struct tasklet_struct tasklet;
-	int poe_type;
-};
-
-static void  *poe_gpio_base;
-static void  *pse_gpio_base;
-struct poe_irq_data *data = NULL;
-u32 mode;
-
-static const struct of_device_id my_of_ids[] = {
-	{.compatible = "poe-judge"},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of,my_of_ids);
-
-static int poe_info_proc_show(struct seq_file *m, void *v)
-{
-	const char *type_str = "invalid";
-
-	switch (data->poe_type) {
-		case POE_TYPE_AT: 
-			type_str = "AT"; 
-			break;
-		case POE_TYPE_AF: 
-			type_str = "AF"; 
-			break;
-		case POE_TYPE_BT: 
-			type_str = "BT"; 
-			break;
-		case POE_TYPE_DC: 
-			type_str = "DC"; 
-			break;
-	}
-
-	seq_printf(m, "%s\n", type_str);
-
-	return 0;
-}
-
-static void poe_tasklet_func(unsigned long data)
-{
-	struct poe_irq_data *irq_data = (struct poe_irq_data *)data;
-
-	writel(0x3, pse_gpio_base+4);
-	irq_data->poe_type = POE_TYPE_BT;
-
-	return;
-}
-
-static irqreturn_t gpio_key1_irq_handler(int irq, void *dev_id)
-{
-	struct poe_irq_data *data = (struct poe_irq_data *)dev_id;
-
-	disable_irq_nosync(data->irq);
-	tasklet_schedule(&data->tasklet);
-
-	return IRQ_HANDLED;
-}
-
-static int poe_info_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, poe_info_proc_show, NULL);
-}
-
-static const struct proc_ops poe_info_proc_fops = {
-	.proc_open = poe_info_proc_open,
-	.proc_read = seq_read,
-	.proc_lseek = seq_lseek,
-	.proc_release = single_release,
-};
-
-static int gpio_key_probe(struct platform_device *dev)
-{
-	int ret = 0;
-	int irq = (-1);
-	int val = 0;
-	int gpio_id = 0;
-	int gpio[GPIO_MAX] = {0}, gpio_val[GPIO_MAX] = {0};
-	int num;
-	char name[16];
-	struct device_node *np = dev->dev.of_node;
-
-	if (of_property_read_u32(np, "detect-mode", &mode)) {
-		pr_err("Failed to read detect mode\n");
-		return -EINVAL;
-	}
-
-	data = devm_kzalloc(&dev->dev, sizeof(struct poe_irq_data), GFP_KERNEL);
-	if (!data)
-	{
-		return -ENOMEM;
-	}
-
-	if (mode & INT_MODE_MASK) {
-		poe_gpio_base = ioremap(0x1017004, 8);
-		pse_gpio_base = ioremap(0x1026000, 8);
-
-		writel(0x2c1, pse_gpio_base);
-		writel(0x0, pse_gpio_base+4);
-
-
-		data->dev = &dev->dev;
-		dev_set_drvdata(&dev->dev, data);
-
-		gpio_id = of_get_named_gpio(dev->dev.of_node, "detect_gpio", 0);
-		if (gpio_id < 0)
-		{
-			return -EINVAL;
-		}
-
-		tasklet_init(&data->tasklet, poe_tasklet_func, (unsigned long)data);
-
-		ret = devm_gpio_request_one(&dev->dev, gpio_id, GPIOF_IN, "poe_judge");
-		if(ret)
-		{
-			pr_err("GPIO23 request failed, ret:%d\n", ret);
-			return ret;
-		}
-
-		val = readl(poe_gpio_base);
-		if(val == 1)
-		{
-			pr_info("poe type is af or bt,close pse first\n");
-			data->poe_type = POE_TYPE_AF;
-		}
-		else
-		{
-			data->poe_type = POE_TYPE_AT;
-		}
-
-		irq = gpio_to_irq(gpio_id);
-		data->irq = irq;
-
-		ret = devm_request_any_context_irq(&dev->dev, data->irq, 
-				gpio_key1_irq_handler, 
-				IRQF_TRIGGER_FALLING, 
-				"poe_judge", data);
-		if (ret)
-		{
-			pr_err("Request irq fail %d\n", ret);
-			return ret;
-		}
-	} else {
-		if (mode == DETECT_MODE1 || mode == DETECT_MODE2) {
-			num = 3;
-		} else {
-			pr_err("Wrong poe detect mode\n");
-			return -ENOMEM;
-		}
-
-		for (int i = 0; i < num; i++) {
-			sprintf(name, "detect-gpio%d", i+1);
-			gpio[i] = of_get_named_gpio(np, name, 0); 	
-			ret = gpio_request(gpio[i], name);
-			if (ret) {
-				pr_err("Can not request gpio %d\n", i+1);
-				return ret;
-			}
-			gpio_direction_input(gpio[i]);
-			gpio_val[i] = gpio_get_value_cansleep(gpio[i]);
-		}
-		
-		if (mode == DETECT_MODE1){
-			if (gpio_val[0] > 0) {
-				data->poe_type = POE_TYPE_DC;
-			} else if (gpio_val[1] > 0){
-				if (gpio_val[2] == 0) {
-					data->poe_type = POE_TYPE_AT;
-				} else {
-					data->poe_type = POE_TYPE_AF;
-				}
-			}
-		}else if (mode == DETECT_MODE2){
-			switch (gpio_val[0] | (gpio_val[1] << 1) | (gpio_val[2] << 2)) {
-				case 3:
-					data->poe_type = POE_TYPE_AT;
-					break;
-				case 4:
-					data->poe_type = POE_TYPE_BT;
-					break;
-				case 7:
-					data->poe_type = POE_TYPE_AF;
-					break;
-			}
-		}
-
-	}
-
-	if (!proc_create("poe_info", 0444, NULL, &poe_info_proc_fops)) {
-		pr_err("Failed to create proc entry for poe_info\n");
-		return -ENOMEM;
-	}
-
-	return ret;
-}
-
-static int gpio_key_remove(struct platform_device *dev)
-{
-	remove_proc_entry("poe_info", NULL);
-
-	return 0;
-}
-
-static struct platform_driver poe_judge_driver =
-{
-	.driver = {
-		.name = "poe_judge",
-		.of_match_table = my_of_ids,
-		.owner = THIS_MODULE,
-	},
-	.probe = gpio_key_probe,
-	.remove = gpio_key_remove,
-};
-
-module_platform_driver(poe_judge_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Poe type judgment driver");
-MODULE_AUTHOR("huangyunxiang<huangyunxiang@cigtech.com>");

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -35,8 +35,7 @@ ipq53xx_setup_interfaces()
 	sercomm,ap72tip-v4)
 		ucidef_set_interface_wan "eth0"
 		;;	
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
+	zyxel,nwa130be)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	esac
@@ -124,18 +123,6 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
 		;;
-	zyxel,nwa50be)
-		wan_mac=$(cat /proc/cmdline)
-		wan_mac="${wan_mac##*hwaddr=}"
-		wan_mac="${wan_mac%% *}"
-		wan_mac="$(echo ${wan_mac} | sed 's/\(..\)/\1:/g;s/:$//')"
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ucidef_set_label_macaddr $wan_mac
-		ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-		;;
         *)
                 wan_mac=$(cat /sys/class/net/eth1/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -66,8 +66,7 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	edgecore,eap105|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
+	zyxel,nwa130be)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
 	cig,wf672)
@@ -89,8 +88,7 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	edgecore,eap105|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
+	zyxel,nwa130be)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;
 	cig,wf672)

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/phy_quirks

@@ -9,8 +9,7 @@ boot() {
 	edgecore,eap105)
 		ssdk_sh debug phy set 0x1 0x601FD032 0xff
 		;;
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
+	zyxel,nwa130be)
 		#eth0: APPE: phyaddr 4  green:2.5G  orange:others
 		ssdk_sh debug phy set 4 0x40078074 0x670
 		ssdk_sh debug phy set 4 0x40078078 0x8600

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -173,8 +173,7 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
+	zyxel,nwa130be)
 		nand_upgrade_tar "$1"
 		;;
 	esac

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -236,15 +236,6 @@
 			};
 		};
 
-		poe {
-			compatible = "poe-judge";
-			detect-mode = <0x3>;
-			detect-gpio1 = <&tlmm 25 GPIO_ACTIVE_HIGH>;
-			detect-gpio2 = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-			detect-gpio3 = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			status = "ok";
-                };
-
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -298,13 +298,6 @@
 			};
 		};
 
-		poe {
-                        compatible = "poe-judge";
-			detect-mode = <0x11>;
-                        detect_gpio = <&tlmm 0x17 0>;
-                        status = "ok";
-                };
-
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -298,13 +298,6 @@
 			};
 		};
 
-		poe {
-                        compatible = "poe-judge";
-			detect-mode = <0x11>;
-                        detect_gpio = <&tlmm 0x17 0>;
-                        status = "ok";
-                };
-
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts

@@ -234,15 +234,6 @@
 			};
 		};
 
-		poe {
-			compatible = "poe-judge";
-			detect-mode = <0x4>;
-			detect-gpio1 = <&extgpio 0 0>;
-			detect-gpio2 = <&extgpio 1 0>;
-			detect-gpio3 = <&extgpio 2 0>;
-			status = "ok";
-                };
-
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;
@@ -547,6 +538,7 @@
 	pinctrl-0 = <&pwm_pins>;
 	pinctrl-names = "default";
 	dft-pwm-status = <0>, <0>, <1>, <0>;
+        poe_type_pin = <&extgpio 0 0 &extgpio 1 0 &extgpio 2 0>;
 	status = "okay";
 };
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-zyxel-nwa50be.dts

@@ -1,893 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP442 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq5332.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332-default-memory.dtsi"
-
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ5332/RDP442/AP-MI01.3";
-	compatible = "zyxel,nwa50be", "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332-rdp442", "qcom,ipq5332";
-
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-
-	/*     512M  Layout for IPQ5332 + QCN6432 + QCN6432
-	 * +==========+==============+========================+
-	 * |         |              |                         |
-	 * |  Region | Start Offset |          Size           |
-	 * |         |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * |   Q6    |              |                         |
-	 * |  code/  |  0x4A900000  |          25MB           |
-	 * |  data   |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  data   |  0x4C200000  |          17MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * | M3 Dump |  0x4D300000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  QDSS   |  0x4D400000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  CALDB  |  0x4D500000  |           3MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  data   |  0x4D800000  |          16MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * | M3 Dump |  0x4E800000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  QDSS   |  0x4E900000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  CALDB  |  0x4EA00000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  data   |  0x4EF00000  |          16MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * | M3 Dump |  0x4FF00000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  QDSS   |  0x50000000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  CALDB  |  0x50100000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |         |              |                         |
-	 * |   MLO   |  0x50600000  |          12MB           |
-	 * +==================================================+
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * |             Rest of memory for Linux             |
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * +==================================================+
-	 */
-
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			reg = <0x0 0x4a900000 0x0 0x5D00000>;
-			no-map;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-			no-map;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			reg = <0x0 0x4C200000 0x0 0x1100000>;
-			no-map;
-		};
-
-		m3_dump: m3_dump@4D300000 {
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_etr_region: q6_etr_dump@4D400000 {
-			reg = <0x0 0x4D400000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D500000 {
-			reg = <0x0 0x4D500000 0x0 0x300000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4D800000 {
-			reg = <0x0 0x4D800000 0x0 0x1000000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4E800000 {
-			reg = <0x0 0x4E800000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4E900000 {
-			reg = <0x0 0x4E900000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4EA00000 {
-			reg = <0x0 0x4EA00000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4EF00000 {
-			reg = <0x0 0x4EF00000 0x0 0x1000000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@4FF00000 {
-			reg = <0x0 0x4FF00000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@50000000 {
-			reg = <0x0 0x50000000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@50100000 {
-			reg = <0x0 0x50100000 0x0 0x500000>;
-			no-map;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@50600000 {
-			reg = <0x0 0x50600000 0x0 0xC00000>;
-			no-map;
-		};
-	};
-#else
-
-	/*  1G  Layout for IPQ5332 + QCN6432 + QCN6432
-	* +==========+==============+========================+
-	* |         |              |                         |
-	* |  Region | Start Offset |          Size           |
-	* |         |              |                         |
-	* +---------+--------------+-------------------------+
-	* |   Q6    |              |                         |
-	* |  code/  |  0x4A900000  |          25MB           |
-	* |  data   |              |                         |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* |  data   |  0x4C200000  |          21MB           |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* | M3 Dump |  0x4D700000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* |  QDSS   |  0x4D800000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* |  CALDB  |  0x4D900000  |           5MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* |  data   |  0x4DE00000  |          21MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* | M3 Dump |  0x4F300000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* |  QDSS   |  0x4F400000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* |  CALDB  |  0x4F500000  |           5MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* |  data   |  0x4FA00000  |          21MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* | M3 Dump |  0x50F00000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* |  QDSS   |  0x51000000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* |  CALDB  |  0x51100000  |           5MB           |
-	* +---------+--------------+-------------------------+
-	* |         |              |                         |
-	* |   MLO   |  0x51600000  |          12MB           |
-	* +==================================================+
-	* |                                                  |
-	* |                                                  |
-	* |                                                  |
-	* |             Rest of memory for Linux             |
-	* |                                                  |
-	* |                                                  |
-	* |                                                  |
-	* +==================================================+
-	*/
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			no-map;
-			reg = <0x0 0x4a900000 0x0 0x6D00000>;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			no-map;
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			no-map;
-			reg = <0x0 0x4C200000 0x0 0x1500000>;
-		};
-
-		m3_dump: m3_dump@4D700000 {
-			no-map;
-			reg = <0x0 0x4D700000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D800000 {
-			no-map;
-			reg = <0x0 0x4D800000 0x0 0x100000>;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
-			no-map;
-			reg = <0x0 0x4D900000 0x0 0x500000>;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
-			no-map;
-			reg = <0x0 0x4DE00000 0x0 0x1500000>;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
-			no-map;
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
-			no-map;
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
-			no-map;
-			reg = <0x0 0x4F500000 0x0 0x500000>;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
-			no-map;
-			reg = <0x0 0x4FA00000 0x0 0x1500000>;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
-			no-map;
-			reg = <0x0 0x50F00000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
-			no-map;
-			reg = <0x0 0x51000000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
-			no-map;
-			reg = <0x0 0x51100000 0x0 0x500000>;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@51600000 {
-			no-map;
-			reg = <0x0 0x51600000 0x0 0xC00000>;
-		};
-	};
-#endif
-
-	aliases {
-		serial0 = &blsp1_uart0;
-		serial1 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio22 is for wan napa, gpio51 for lan napa*/
-			phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
-			status = "okay";
-
-			phy2: ethernet-phy@2 {
-				reg = <28>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-			led_blue{
-				label = "led_blue";
-				gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_blue";
-				default-state = "off";
-			};
-			led_green {
-				label = "led_green";
-				gpio = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_green";
-				default-state = "on";
-			};
-			led_white {
-				label = "led_white";
-				gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_white";
-				default-state = "off";
-			};
-			led_red {
-				label = "led_red";
-				gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_red";
-				default-state = "off";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x4>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>; /* wan port bitmap */
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <2>;
-						phy_address = <28>;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <28>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <28>;
-			mdiobus = <&mdio>;
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <3>;
-			chip_info = <0 2 1 2>,
-				    <1 2 2 0>,
-				    <2 2 0 1>;
-		};
-
-		q6v5_wcss: remoteproc@d100000 {
-			boot-args = <0x1 0x4 0x3 0x0 0x26 0x2>,
-					<0x1 0x4 0x4 0x1 0x2f 0x2>;
-			memory-region = <&q6_mem_regions>;
-
-			/delete-node/ remoteproc_pd1;
-			/delete-node/ remoteproc_pd2;
-			/delete-node/ remoteproc_pd3;
-
-			q6_wcss_pd4: remoteproc_pd4 {
-				compatible = "qcom,ipq5332-mpd-upd-text";
-				firmware = "IPQ5332/q6_fw4.mdt";
-
-				q6_wcss_pd1: remoteproc_pd1 {
-					compatible = "qcom,ipq5332-wcss-ahb-mpd";
-					firmware = "IPQ5332/q6_fw1.mdt";
-					m3_firmware = "IPQ5332/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 8 0>,
-							<&wcss_smp2p_in 9 0>,
-							<&wcss_smp2p_in 12 0>,
-							<&wcss_smp2p_in 11 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 8>,
-							<&wcss_smp2p_out 9>,
-							<&wcss_smp2p_out 10>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					memory-region = <&q6_ipq5332_data>,
-							<&m3_dump>,
-							<&q6_etr_region>,
-							<&q6_ipq5332_caldb>;
-				};
-
-				q6_wcss_pd2: remoteproc_pd2 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw2.mdt";
-					m3_firmware = "qcn6432/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 16 0>,
-							<&wcss_smp2p_in 17 0>,
-							<&wcss_smp2p_in 20 0>,
-							<&wcss_smp2p_in 19 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 16>,
-							<&wcss_smp2p_out 17>,
-							<&wcss_smp2p_out 18>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					memory-region = <&q6_qcn6432_data_1>,
-							<&m3_dump_qcn6432_1>,
-							<&q6_qcn6432_etr_1>,
-							<&q6_qcn6432_caldb_1>;
-					status = "ok";
-				};
-
-				q6_wcss_pd3: remoteproc_pd3 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw3.mdt";
-					interrupts-extended = <&wcss_smp2p_in 24 0>,
-							<&wcss_smp2p_in 25 0>,
-							<&wcss_smp2p_in 28 0>,
-							<&wcss_smp2p_in 27 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 24>,
-							<&wcss_smp2p_out 25>,
-							<&wcss_smp2p_out 26>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					memory-region = <&q6_qcn6432_data_2>,
-							<&m3_dump_qcn6432_2>,
-							<&q6_qcn6432_etr_2>,
-							<&q6_qcn6432_caldb_2>;
-					status = "ok";
-				};
-			};
-		};
-	};
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-        pinctrl-0 = <&serial_1_pins>;
-        pinctrl-names = "default";
-        status = "disabled";
-};
-
-&blsp1_i2c1 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11", "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	led_pins: led_pins {
-		led_blue {
-			pins = "gpio22";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_green {
-			pins = "gpio45";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_white {
-			pins = "gpio43";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_red {
-			pins = "gpio44";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux {
-		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	i2c_1_pins: i2c-1-state {
-		pins = "gpio29", "gpio30";
-		function = "blsp1_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	button_pins: button-state {
-		pins = "gpio35";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	mdio1_pins: mdio1-state {
-		mux_0 {
-			pins = "gpio27";
-			function = "mdc1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio28";
-			function = "mdio1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,select-utmi-as-pipe-clk;
-	status = "okay";
-
-	dwc3@8a00000 {
-		/delete-property/ #phy-cells;
-		/delete-property/ phys;
-		/delete-property/ phy-names;
-	};
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&wifi0 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D900000 0x4D500000 0x0 0x0 0x0 0x0>;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-	qcom,tgt-mem-mode = <1>;
-	qcom,caldb-size = <0x300000>;
-#else
-	qcom,tgt-mem-mode = <0>;
-	qcom,caldb-size = <0x500000>;
-#endif
-	qcom,board_id = <0x12>;
-#if defined(__CNSS2__)
-	mem-region = <&q6_ipq5332_data>;
-#else
-	memory-region = <&q6_ipq5332_data>;
-#endif
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	status = "ok";
-};
-
-&wifi1 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd2>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,bdf-addr = <0x4DE00000 0x4D800000 0x0 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4F500000 0x4EA00000 0x0 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x20000884>;
-	qcom,caldb-size = <0x500000>;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-	qcom,tgt-mem-mode = <1>;
-#else
-	qcom,tgt-mem-mode = <0>;
-#endif
-	qcom,board_id = <0x060>;
-#if defined(__CNSS2__)
-	mem-region = <&q6_qcn6432_data_1>;
-#else
-	memory-region = <&q6_qcn6432_data_1>;
-#endif
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	status = "ok";
-	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};
-
-&wifi2 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd3>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,bdf-addr = <0x4FA00000 0x4EF00000 0x4FA00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x51100000 0x50100000 0x51100000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x18000884>;
-	qcom,caldb-size = <0x500000>;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-	qcom,tgt-mem-mode = <1>;
-#else
-	qcom,tgt-mem-mode = <0>;
-#endif
-	qcom,board_id = <0x070>;
-#if defined(__CNSS2__)
-	mem-region = <&q6_qcn6432_data_2>;
-#else
-	memory-region = <&q6_qcn6432_data_2>;
-#endif
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <2>;
-	status = "ok";
-	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -149,22 +149,6 @@ define Device/zyxel_nwa130be
 endef
 TARGET_DEVICES += zyxel_nwa130be
 
-
-define Device/zyxel_nwa50be
-  DEVICE_TITLE := Zyxel NWA50BE
-  DEVICE_DTS := ipq5332-zyxel-nwa50be
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config-mi01.3
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-zyxel-nwa130be ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
-endef
-TARGET_DEVICES += zyxel_nwa50be
-
 define Device/cig_wf672
   DEVICE_TITLE := CIG WF672
   DEVICE_DTS := ipq5332-cig-wf672

feeds/qca-wifi-7/mac80211/patches-zyxel_nwa50be/ath12k/0001-thermal-thermal-setting.patch

@@ -1,66 +0,0 @@
-From f13f2e47f4a14443b4244672b3a6c71c21306806 Mon Sep 17 00:00:00 2001
-From: YenLin Pan <yenlin.pan@zyxel.com.tw>
-Date: Wed, 9 Jul 2025 11:47:31 +0800
-Subject: [PATCH] thermal: thermal setting
-
-lo0 -100 -hi0 105 -off0 0
-lo1 95 -hi1 110 -off1 20
-lo2 100 -hi2 115 -off2 60
-lo3 105 -hi3 119 -off3 98
-
-Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
----
- drivers/net/wireless/ath/ath12k/thermal.h | 28 +++++++++++------------
- 1 file changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
-index 5c91906..db1f251 100644
---- a/drivers/net/wireless/ath/ath12k/thermal.h
-+++ b/drivers/net/wireless/ath/ath12k/thermal.h
-@@ -13,29 +13,29 @@
- 
- /* Below temperatures are in celsius */
- #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
-+#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 105
- #define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 110
- #define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 115
- #define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
--#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 119
- 
- #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
--#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
--#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 119
- #define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
- #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
--#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
--#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
--#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
-+#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 20
-+#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 60
-+#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 98
- 
- #define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
- #define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--- 
-2.34.1
-

feeds/qca-wifi-7/qca-ssdk-qca/Makefile

@@ -100,7 +100,6 @@ endif
 ifdef CONFIG_TARGET_PROFILE
 TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
 PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-FILES_PROFILE_NAME=files-$(subst DEVICE_,,$(TARGET_PROFILE))
 endif
 
 QCASSDK_CONFIG_OPTS+= TOOL_PATH=$(TOOLCHAIN_BIN_PATH) \
@@ -203,15 +202,6 @@ define patch_profile
 	$(call PatchDir/Default,$(PKG_BUILD_DIR),./$(PATCH_PROFILE_NAME))
 endef
 
-define files_profile
-
-	if [ -d "./$(FILES_PROFILE_NAME)" ]; then \
-		$(CP) ./$(FILES_PROFILE_NAME)/* ./files/ ; \
-	fi
-endef
-
 Hooks/Prepare/Post += patch_profile
-Hooks/Prepare/Post += files_profile
-
 $(eval $(call KernelPackage,qca-ssdk-qca-nohnat))
 $(eval $(call KernelPackage,qca-ssdk-qca-hnat))

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa130be/qca-ssdk

@@ -1,317 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
-# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-
-START=16
-
-#!/bin/sh
-ruletype="ip4 ip6"
-side="wan lan"
-qwan="1 3 2 0 5 7 6 4"
-qlan="0 1 2 3 4 5 6 7"
-
-function create_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		#echo $queue
-		#echo "creating list $listid"
-		ssdk_sh acl list create $listid 255
-		ruleid=0
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
-				#echo $cmd
-				if [ "$rt" == "ip4" ];then
-					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				else
-					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				fi
-				if [ $ruleid -le 3 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				elif [ $ruleid -le 7 ];then
-					#zero dscp
-					cmd="$cmd n"
-				elif [ $ruleid -le 11 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				else
-					#zero dscp
-					cmd="$cmd n"
-				fi
-				p=$((ruleid/2))
-				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
-				#echo $cmd
-				$cmd
-				ruleid=`expr $ruleid + 1`
-			done
-		done
-		ssdk_sh acl list bind $listid 0 1 $portmap
-	done
-}
-
-function create_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 0
-	ssdk_sh cosmap pri2q set 3 0
-	ssdk_sh cosmap pri2q set 4 1
-	ssdk_sh cosmap pri2q set 5 1
-	ssdk_sh cosmap pri2q set 6 1
-	ssdk_sh cosmap pri2q set 7 1
-	ssdk_sh cosmap pri2ehq set 0 0
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 0
-	ssdk_sh cosmap pri2ehq set 3 0
-	ssdk_sh cosmap pri2ehq set 4 1
-	ssdk_sh cosmap pri2ehq set 5 1
-	ssdk_sh cosmap pri2ehq set 6 1
-	ssdk_sh cosmap pri2ehq set 7 1
-}
-
-function create_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-
-	ssdk_sh acl list create 56 48
-	#action bypass eg stp check
-	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
-	if [ "$chip_ver" == "0x2000" ]; then
-		action="$action n n 0"
-	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		action="$action n n n 0"
-	else
-		action="$action 0"
-	fi
-
-	for ruleid in $( seq 0 2 )
-	do
-		if [ "$ruleid" == "0" ];then
-			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
-		elif [ "$ruleid" == "1" ];then
-			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		else
-			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		fi
-		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-			cmd="$cmd n $action"
-		else
-			cmd="$cmd $action"
-		fi
-		#echo $cmd
-		$cmd
-	done
-	ssdk_sh acl list bind 56 0 2 1
-}
-
-function delete_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		ssdk_sh acl list unbind $listid 0 1 $portmap
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule del $listid 0 1"
-				echo $cmd
-				$cmd
-			done
-		done
-		#echo "deleting list $listid"
-		ssdk_sh acl list destroy $listid
-	done
-}
-
-function delete_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 1
-	ssdk_sh cosmap pri2q set 3 1
-	ssdk_sh cosmap pri2q set 4 2
-	ssdk_sh cosmap pri2q set 5 2
-	ssdk_sh cosmap pri2q set 6 3
-	ssdk_sh cosmap pri2q set 7 3
-	ssdk_sh cosmap pri2ehq set 0 1
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 2
-	ssdk_sh cosmap pri2ehq set 3 2
-	ssdk_sh cosmap pri2ehq set 4 3
-	ssdk_sh cosmap pri2ehq set 5 3
-	ssdk_sh cosmap pri2ehq set 6 4
-	ssdk_sh cosmap pri2ehq set 7 5
-}
-
-function delete_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-	ssdk_sh acl list unbind 56 0 2 1
-	ssdk_sh acl rule del 56 0 1
-	ssdk_sh acl rule del 56 1 1
-	ssdk_sh acl rule del 56 2 1
-	ssdk_sh acl list destroy 56
-}
-
-function edma_war_config_add(){
-	create_war_cosmap
-	ssdk_sh acl status set enable
-	create_war_acl_rules
-}
-
-function edma_war_config_del(){
-	delete_war_acl_rules
-	delete_war_cosmap
-}
-
-function ipq50xx_serdes_monitor () {
-	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
-	port_id=2
-	old_linkstatus="DISABLE"
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set 29 0xb 0x300d
-		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-
-		while true
-		do
-			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
-			#when qca808x phy link status is from down to up, serdes tx would be enabled
-			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0xb00d
-				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
-			fi
-			#when qca808x phy link status is from up to down, serdes tx would be disabled
-			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0x300d
-				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-			fi
-			old_linkstatus=$cur_linkstatus
-		done
-	fi
-}
-
-function ipq53xx_phy_amplitude_set () {
-	#for qca808x phy sgmii, set half amplitude with src_half_swing register
-	port_id=2
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd180" ]; then
-		ssdk_sh debug phy set 5 0x40010087 0x208a
-		ssdk_sh debug phy set 6 0x40010087 0x208a
-		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
-		ampl_val=$(eval "ssdk_sh debug phy get 5 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 5 0x40010067 $ampl_val
-		ampl_val=$(eval "ssdk_sh debug phy get 6 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 6 0x40010067 $ampl_val
-	fi
-}
-
-function ipq53xx_uniphy_amplitude_set () {
-	#for ipq50xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
-	ssdk_sh debug uniphy set 0 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 0 0x24 0 4
-	ssdk_sh debug uniphy set 1 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 1 0x24 0 4
-}
-
-ssdk_dependency() {
-	counter=0
-	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
-		insmod qca-ssdk.ko
-	}
-	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
-	do
-		sleep 1
-		counter=$((counter+1))
-	done
-}
-
-start() {
-	ssdk_dependency
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to enable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_add
-		echo ''
-	fi
-	#The following commands should be uncommented to add acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#create_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	#The following commands should be uncommented to enable WAR for ipq50xx
-	chip_type_info=`cat tmp/sysinfo/model`
-	result=$(echo $chip_type_info | grep "IPQ5018")
-	if [ "$result" != "" ]; then
-		#ipq50xx_serdes_monitor &
-		#ipq50xx_uniphy_amplitude_set
-		#ipq50xx_phy_amplitude_set
-		echo ''
-	fi
-	if [ "$chip_ver" = "0x2001" ]; then
-		ipq53xx_uniphy_amplitude_set
-		ipq53xx_phy_amplitude_set
-		echo ''
-	fi
-	echo starting
-}
-
-stop() {
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to disable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_del
-		echo ''
-	fi
-	#The following commands should be uncommented to delete acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#delete_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	echo stoping
-}

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa50be/qca-ssdk

@@ -1,315 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
-# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-
-START=16
-
-#!/bin/sh
-ruletype="ip4 ip6"
-side="wan lan"
-qwan="1 3 2 0 5 7 6 4"
-qlan="0 1 2 3 4 5 6 7"
-
-function create_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		#echo $queue
-		#echo "creating list $listid"
-		ssdk_sh acl list create $listid 255
-		ruleid=0
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
-				#echo $cmd
-				if [ "$rt" == "ip4" ];then
-					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				else
-					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				fi
-				if [ $ruleid -le 3 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				elif [ $ruleid -le 7 ];then
-					#zero dscp
-					cmd="$cmd n"
-				elif [ $ruleid -le 11 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				else
-					#zero dscp
-					cmd="$cmd n"
-				fi
-				p=$((ruleid/2))
-				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
-				#echo $cmd
-				$cmd
-				ruleid=`expr $ruleid + 1`
-			done
-		done
-		ssdk_sh acl list bind $listid 0 1 $portmap
-	done
-}
-
-function create_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 0
-	ssdk_sh cosmap pri2q set 3 0
-	ssdk_sh cosmap pri2q set 4 1
-	ssdk_sh cosmap pri2q set 5 1
-	ssdk_sh cosmap pri2q set 6 1
-	ssdk_sh cosmap pri2q set 7 1
-	ssdk_sh cosmap pri2ehq set 0 0
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 0
-	ssdk_sh cosmap pri2ehq set 3 0
-	ssdk_sh cosmap pri2ehq set 4 1
-	ssdk_sh cosmap pri2ehq set 5 1
-	ssdk_sh cosmap pri2ehq set 6 1
-	ssdk_sh cosmap pri2ehq set 7 1
-}
-
-function create_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-
-	ssdk_sh acl list create 56 48
-	#action bypass eg stp check
-	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
-	if [ "$chip_ver" == "0x2000" ]; then
-		action="$action n n 0"
-	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		action="$action n n n 0"
-	else
-		action="$action 0"
-	fi
-
-	for ruleid in $( seq 0 2 )
-	do
-		if [ "$ruleid" == "0" ];then
-			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
-		elif [ "$ruleid" == "1" ];then
-			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		else
-			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		fi
-		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-			cmd="$cmd n $action"
-		else
-			cmd="$cmd $action"
-		fi
-		#echo $cmd
-		$cmd
-	done
-	ssdk_sh acl list bind 56 0 2 1
-}
-
-function delete_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		ssdk_sh acl list unbind $listid 0 1 $portmap
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule del $listid 0 1"
-				echo $cmd
-				$cmd
-			done
-		done
-		#echo "deleting list $listid"
-		ssdk_sh acl list destroy $listid
-	done
-}
-
-function delete_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 1
-	ssdk_sh cosmap pri2q set 3 1
-	ssdk_sh cosmap pri2q set 4 2
-	ssdk_sh cosmap pri2q set 5 2
-	ssdk_sh cosmap pri2q set 6 3
-	ssdk_sh cosmap pri2q set 7 3
-	ssdk_sh cosmap pri2ehq set 0 1
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 2
-	ssdk_sh cosmap pri2ehq set 3 2
-	ssdk_sh cosmap pri2ehq set 4 3
-	ssdk_sh cosmap pri2ehq set 5 3
-	ssdk_sh cosmap pri2ehq set 6 4
-	ssdk_sh cosmap pri2ehq set 7 5
-}
-
-function delete_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-	ssdk_sh acl list unbind 56 0 2 1
-	ssdk_sh acl rule del 56 0 1
-	ssdk_sh acl rule del 56 1 1
-	ssdk_sh acl rule del 56 2 1
-	ssdk_sh acl list destroy 56
-}
-
-function edma_war_config_add(){
-	create_war_cosmap
-	ssdk_sh acl status set enable
-	create_war_acl_rules
-}
-
-function edma_war_config_del(){
-	delete_war_acl_rules
-	delete_war_cosmap
-}
-
-function ipq50xx_serdes_monitor () {
-	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
-	port_id=2
-	old_linkstatus="DISABLE"
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set 29 0xb 0x300d
-		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-
-		while true
-		do
-			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
-			#when qca808x phy link status is from down to up, serdes tx would be enabled
-			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0xb00d
-				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
-			fi
-			#when qca808x phy link status is from up to down, serdes tx would be disabled
-			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0x300d
-				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-			fi
-			old_linkstatus=$cur_linkstatus
-		done
-	fi
-}
-
-function ipq53xx_phy_amplitude_set () {
-	#PHY (8081->5321): Full amplitude (bit[7:5]=000), half swing (bit[4]=1)
-	#for qca808x phy sgmii, set half amplitude with src_half_swing register
-	port_id=2
-	phy_addr=0x1d
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set $phy_addr 0x40010087 0x208a
-		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
-		ampl_val=$(ssdk_sh debug phy get $phy_addr 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/')
-		ssdk_sh debug phy set $phy_addr 0x40010067 $ampl_val
-	fi
-}
-
-function ipq53xx_uniphy_amplitude_set () {
-        #UniPhy (5321->8081): Custom amplitude (bit[8:4]=21) = 0xb15d
-	#for ipq53xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
-	ssdk_sh debug uniphy set 1 0x7ac 0xb15d 4
-	ssdk_sh debug uniphy set 1 0x24 0 4
-}
-
-ssdk_dependency() {
-	counter=0
-	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
-		insmod qca-ssdk.ko
-	}
-	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
-	do
-		sleep 1
-		counter=$((counter+1))
-	done
-}
-
-start() {
-	ssdk_dependency
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to enable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_add
-		echo ''
-	fi
-	#The following commands should be uncommented to add acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#create_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	#The following commands should be uncommented to enable WAR for ipq50xx
-	chip_type_info=`cat tmp/sysinfo/model`
-	result=$(echo $chip_type_info | grep "IPQ5018")
-	if [ "$result" != "" ]; then
-		#ipq50xx_serdes_monitor &
-		#ipq50xx_uniphy_amplitude_set
-		#ipq50xx_phy_amplitude_set
-		echo ''
-	fi
-	if [ "$chip_ver" = "0x2001" ]; then
-		ipq53xx_uniphy_amplitude_set
-		ipq53xx_phy_amplitude_set
-		echo ''
-	fi
-	echo starting
-}
-
-stop() {
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to disable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_del
-		echo ''
-	fi
-	#The following commands should be uncommented to delete acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#delete_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	echo stoping
-}

feeds/qca-wifi-7/qca-ssdk-qca/patches-zyxel_nwa50be/0001-pinctrl-make-the-switch-LED-works.patch

@@ -1,47 +0,0 @@
-From 7fa9e9b683f1c573c58a14755347988919bc7d06 Mon Sep 17 00:00:00 2001
-From: YenLin Pan <yenlin.pan@zyxel.com.tw>
-Date: Wed, 14 May 2025 13:47:06 +0800
-Subject: [PATCH] pinctrl: make the switch LED works
-
-Enable switch LED pin definition for LED0/LED1/LED2 control
-
-Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
----
- src/init/ssdk_mht_pinctrl.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/src/init/ssdk_mht_pinctrl.c b/src/init/ssdk_mht_pinctrl.c
-index 2debe59..1ae0002 100755
---- a/src/init/ssdk_mht_pinctrl.c
-+++ b/src/init/ssdk_mht_pinctrl.c
-@@ -33,11 +33,17 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
-     /*PINs default MUX Setting*/
-     MHT_PIN_SETTING_MUX(0,  MHT_PIN_FUNC_INTN_WOL),
-     MHT_PIN_SETTING_MUX(1,  MHT_PIN_FUNC_INTN),
--#if 0
-+#if 1
-     MHT_PIN_SETTING_MUX(2,  MHT_PIN_FUNC_P0_LED_0),
-     MHT_PIN_SETTING_MUX(3,  MHT_PIN_FUNC_P1_LED_0),
-     MHT_PIN_SETTING_MUX(4,  MHT_PIN_FUNC_P2_LED_0),
-     MHT_PIN_SETTING_MUX(5,  MHT_PIN_FUNC_P3_LED_0),
-+    MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_P0_LED_2),
-+    MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_P1_LED_2),
-+    MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_P2_LED_2),
-+    MHT_PIN_SETTING_MUX(9,  MHT_PIN_FUNC_P3_LED_2),
-+#endif
-+#if 0
-     MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_PPS_IN),
-     MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_TOD_IN),
-     MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_RTC_REFCLK_IN),
-@@ -49,7 +55,7 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
-     MHT_PIN_SETTING_MUX(13, MHT_PIN_FUNC_P0_TOD_OUT),
-     MHT_PIN_SETTING_MUX(14, MHT_PIN_FUNC_P0_CLK125_TDI),
-     MHT_PIN_SETTING_MUX(15, MHT_PIN_FUNC_P0_SYNC_CLKO_PTP),
--#if 0
-+#if 1
-     MHT_PIN_SETTING_MUX(16, MHT_PIN_FUNC_P0_LED_1),
-     MHT_PIN_SETTING_MUX(17, MHT_PIN_FUNC_P1_LED_1),
-     MHT_PIN_SETTING_MUX(18, MHT_PIN_FUNC_P2_LED_1),
--- 
-2.34.1
-

feeds/ucentral/poe/Makefile

@@ -1,42 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=poe
-PKG_VERSION:=1.0
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_ipq50xx_generic_DEVICE_sonicfi_rap630w_311g),y)
-TARGET_CFLAGS += -DPLATFORM_EWW631_B1=1
-endif
-
-define Package/poe
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=Turn on/off PoE ports with TSP23861 chipset
-	DEPENDS:= +libubox +libubus +libuci +libi2c
-endef
-
-define Package/poe/description
-  Turn on/off PoE ports
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-
-define Package/poe/install
-	$(INSTALL_DIR) $(1)
-	$(INSTALL_DIR) $(1)/etc/config $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/poe.init $(1)/etc/init.d/poe
-	$(INSTALL_BIN) ./files/poe.config $(1)/etc/config/poe
-
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tps23861-poe-ctrl $(1)/usr/bin
-endef
-
-$(eval $(call BuildPackage,poe))

feeds/ucentral/poe/files/poe.init

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=10
-
-tps23861_poe_ctrl () {
-	local section="$1"
-	local num mode
-	config_get num "$section" port_num
-	config_get mode "$section" admin_mode
-	
-	if [ "$mode" == "1" ]; then
-		output=$(tps23861-poe-ctrl -p "${num}" -P on)
-		echo "<6>${output}" > "/dev/kmsg"
-	else
-		output=$(tps23861-poe-ctrl -p "${num}" -P off)
-		echo "<6>${output}" > "/dev/kmsg"
-	fi
-}
-
-start(){
-	. /lib/functions.sh
-	
-	board=$(board_name)
-	case $board in
-	sonicfi,rap630w-311g|\
-	cybertan,eww631-b1)
-		config_load poe
-		config_foreach tps23861_poe_ctrl port
-		;;
-	*)
-		;;
-	esac
-}

feeds/ucentral/poe/src/Makefile

@@ -1,26 +0,0 @@
-CFLAGS += -Wall -g
-
-INCLUDES =
-
-LDFLAGS = -lubus -lubox -li2c
-
-LIBS = 
-
-SRCS = tps23861-poe-ctrl.c \
-
-OBJS = $(SRCS:.c=.o)
-
-MAIN = tps23861-poe-ctrl
-
-
-all:   $(MAIN) 
-
-$(MAIN): $(OBJS)
-	$(CC) $(CFLAGS) $(INCLUDES) -o $(MAIN) $(OBJS) $(LDFLAGS) $(LIBS)
-	
-.c.o:
-	$(CC) $(CFLAGS) $(INCLUDES) -c $<  -o $@
-
-clean:
-	$(RM) *.o *~ $(MAIN) $(TEST)
-

feeds/ucentral/poe/src/tps23861-poe-ctrl.c

@@ -1,215 +0,0 @@
-/*
- * User-space daemon formonitoring and managing PoE ports with
- * TI TPS23861 chips. based on the Linux Kernel TPS23861
- * HWMON driver.
-*/
-
-#include <stdio.h>		/* Standard input/output definitions */
-#include <string.h>		/* String function definitions */
-#include <unistd.h>		/* UNIX standard function definitions */
-#include <fcntl.h>		/* File control definitions */
-#include <errno.h>		/* Error number definitions */
-#include <sys/ioctl.h>
-#include <linux/i2c.h>
-#include <linux/i2c-dev.h>  /* uapi/linux/i2c-dev.h */
-
-#include <libubox/ulog.h>
-
-#define TPS23861_I2C_ADDR				0x20
-#define DETECT_CLASS_RESTART			0x18
-#define POWER_ENABLE					0x19
-#define POWER_ON_SHIFT					0
-#define POWER_OFF_SHIFT					4
-
-typedef unsigned char	u8;
-
-#if defined(PLATFORM_EWW631_B1)
-#define TPS23861_NUM_PORTS				1
-#endif
-
-#define CONVERT_PORT_NUM(x)				(1 << ((u8)x-1))
-
-unsigned int  PORT_POWER_STATUS[TPS23861_NUM_PORTS];
-
-int i2c_handler = -1;
-#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
-
-int open_device(void)
-{
-	int fd, fset;
-
-	fd = open("/dev/i2c-0", O_RDWR);
-	fset = fcntl(fd, F_SETFL, 0);
-	if (fset < 0)
-		printf("fcntl failed!\n");
-
-	//if (isatty(STDIN_FILENO) == 0)
-	//	printf("standard input is not a terminal device\n");
-
-	return fd;
-}
-
-int access_salve(int fd)
-{
-	int ret;
-
-	if((ret = ioctl(fd, I2C_SLAVE, TPS23861_I2C_ADDR)) < 0)
-	{
-		printf("%s: Failed to access slave bus[%s]\n",__func__, strerror(errno));
-		return -1;
-	}
-	return(ret);
-}
-
-// Write to an I2C slave device's register:
-int i2c_write(u8 slave_addr, u8 reg, u8 data)
-{
-	u8 outbuf[2];
-
-	struct i2c_msg msgs[1];
-	struct i2c_rdwr_ioctl_data msgset[1];
-
-	outbuf[0] = reg;
-	outbuf[1] = data;
-
-	msgs[0].addr = slave_addr;
-	msgs[0].flags = 0;
-	msgs[0].len = 2;
-	msgs[0].buf = outbuf;
-
-	msgset[0].msgs = msgs;
-	msgset[0].nmsgs = 1;
-
-	if (ioctl(i2c_handler, I2C_RDWR, &msgset) < 0) {
-		perror("ioctl(I2C_RDWR) in i2c_write");
-		return -1;
-	}
-
-	return 0;
-}
-
-void poe_set_PowerOnOff(u8 port, u8 on_off) {
-	u8 value;
-	u8 portBit;
-	portBit = CONVERT_PORT_NUM(port+1);
-
-	if(on_off == 0) {
-		value = (portBit << POWER_OFF_SHIFT);
-		PORT_POWER_STATUS[port] = 0;
-	} else {
-		value = (portBit << POWER_ON_SHIFT);
-		PORT_POWER_STATUS[port] = 1;
-	}
-
-	ULOG_DBG("set Port%d Power Status [%d] portBit 0x[%x] value 0x[%x]\n", port+1, PORT_POWER_STATUS[port], portBit, value);
-
-	if(i2c_write(TPS23861_I2C_ADDR, POWER_ENABLE, value) < 0)
-	{
-		ULOG_ERR("Set port%d power on-off error (0x19)\n", port);
-	}
-}
-
-void RestartPortDetectClass(u8 port)
-{
-	u8 value;
-
-	value = (1 << port) | (1 << (port + 4));
-	ULOG_DBG("RestartPortDetectClass value 0x%x\n", value);
-	if(i2c_write(TPS23861_I2C_ADDR, DETECT_CLASS_RESTART, value) < 0) {
-			ULOG_ERR("Set port%d detection and class on error\n",port);
-	}
-}
-
-int usage(const char *progname)
-{
-	fprintf(stderr, "Usage: %s -p <1-3> -P <on|off> [options]\n"
-			"Required options:\n"
-			"  -p <1-3>:           Select port number (Only port 1 is supported)\n"
-			"  -P <on|off>:        Set PSE function state <on|off>\n"
-			"Optional options:\n"
-			"  -d                  Enable debug mode\n"
-			"\n", progname);
-	return 1;
-}
-
-static int setPSE(int port ,char *optarg)
-{
-	int ret = 0;
-	i2c_handler = open_device();
-	if (i2c_handler < 0) {
-		ULOG_ERR("open i2c-0 device error!\n");
-		goto EXIT;
-	}
-
-	ret = access_salve(i2c_handler);
-	if (ret < 0)
-	{
-		ULOG_ERR("The i2c-0 access error\n");
-		goto EXIT;
-	}
-
-	if(!strncmp("on", optarg, 2)) {
-		printf("Enable port%d PSE function\n", port);
-		RestartPortDetectClass(port-1);
-	}
-	else if (!strncmp("off", optarg, 3)) {
-		printf("Disable port%d PSE function\n", port);
-		poe_set_PowerOnOff(port-1, 0);
-	}
-	else {
-		ULOG_ERR("[Set] Do not accept this optarg!!!\n");
-		ret = 1;
-	}
-EXIT:
-	close(i2c_handler);
-	return ret;
-}
-
-int main(int argc, char *argv[])
-{
-	int ch, ret = 0, port = 0;
-	char *PSE = NULL;
-	if (argc == 1) {
-		return usage(argv[0]);
-	}
-
-
-	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "tps23861");
-	ulog_threshold(LOG_INFO);
-
-	while ((ch = getopt(argc, argv, "dp:P:")) != -1) {
-		switch (ch) {
-		case 'd':
-			printf("tps23861-i2c-control ulog_threshold set to debug level\n");
-			ulog_threshold(LOG_DEBUG);
-			break;
-
-		case 'p':
-			port = atoi(optarg);
-			break;
-
-		case 'P':
-			PSE = optarg;
-			break;
-
-		default:
-			ret = usage(argv[0]);
-			break;
-		}
-	}
-
-	if (port < 1 || port > 3) {
-		ret = usage(argv[0]);
-	}
-	else {
-		if (PSE) {
-			setPSE(port, PSE);
-		}
-		else {
-			ret = usage(argv[0]);
-		}
-	}
-
-	return ret;
-
-}

feeds/ucentral/ucentral-client/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=7dfeaedf141a6377de2dc6bcd646b1640201f204db42af52777d018700bc991c
+PKG_MIRROR_HASH:=c266b7126cb1388da83c3f35613ed4821046a021e36880b37be38976a81dac9b
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-06-27
-PKG_SOURCE_VERSION:=08a842d9921196821a19d52b9061db6c428aab3f
+PKG_SOURCE_DATE:=2024-10-20
+PKG_SOURCE_VERSION:=4d01f3ee74cd08cb894f372c8cc185d299f977a7
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/init.d/ucentral

@@ -14,6 +14,7 @@ reload_service() {
 }
 
 start_service() {
+	[ -f /etc/ucentral/operational.ca -a -f /etc/ucentral/operational.pem ] || return
 	[ -s /etc/ucentral/capabilities.json ] || rm /etc/ucentral/capabilities.json
 	[ -f /etc/ucentral/capabilities.json ] || /usr/share/ucentral/capabilities.uc
 
@@ -44,6 +45,7 @@ start_service() {
 
 	server=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["server"]')
 	port=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["port"]')
+	hostname_validate=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["hostname_validate"]')
 
 	boot_cause=$(cat /tmp/pstore | jsonfilter -e '@["pstore"][-1]'.boot_cause)
 	[ -z $boot_cause ] && boot_cause=coldboot
@@ -52,6 +54,7 @@ start_service() {
 	[ -n "$serial" ] && procd_append_param command -S $serial
 	[ -n "$server" ] && procd_append_param command -s $server
 	[ -n "$port" ] && procd_append_param command -P $port
+	[ "$hostname_validate" -eq 0 ] || procd_append_param command -h
 	[ "$debug" -eq 0 ] || procd_append_param command -d
 	[ "$insecure" -eq 0 ] || procd_append_param command -i
 	[ -z "$(mount | grep 'tmpfs on / type tmpfs')" ] || procd_append_param command -r

feeds/ucentral/ucentral-schema/files/etc/ucentral/examples/crypto-enterprise.json

@@ -37,8 +37,8 @@
 						"ieee80211w": "optional"
 					},
 					"certificates": {
-						"ca-certificate": "/etc/ucentral/cas.pem",
-						"certificate": "/etc/ucentral/cert.pem",
+						"ca-certificate": "/etc/ucentral/operational.ca",
+						"certificate": "/etc/ucentral/operational.pem",
 						"private-key": "/etc/ucentral/key.pem"
 					},
 					"radius": {
@@ -64,8 +64,8 @@
 						"ieee80211w": "optional"
 					},
 					"certificates": {
-						"ca-certificate": "/etc/ucentral/cas.pem",
-						"certificate": "/etc/ucentral/cert.pem",
+						"ca-certificate": "/etc/ucentral/operational.ca",
+						"certificate": "/etc/ucentral/operational.pem",
 						"private-key": "/etc/ucentral/key.pem"
 					},
 					"radius": {
@@ -91,8 +91,8 @@
 						"ieee80211w": "optional"
 					},
 					"certificates": {
-						"ca-certificate": "/etc/ucentral/cas.pem",
-						"certificate": "/etc/ucentral/cert.pem",
+						"ca-certificate": "/etc/ucentral/operational.ca",
+						"certificate": "/etc/ucentral/operational.pem",
 						"private-key": "/etc/ucentral/key.pem"
 					},
 					"radius": {
@@ -118,8 +118,8 @@
 						"ieee80211w": "optional"
 					},
 					"certificates": {
-						"ca-certificate": "/etc/ucentral/cas.pem",
-						"certificate": "/etc/ucentral/cert.pem",
+						"ca-certificate": "/etc/ucentral/operational.ca",
+						"certificate": "/etc/ucentral/operational.pem",
 						"private-key": "/etc/ucentral/key.pem"
 					},
 					"radius": {
@@ -145,8 +145,8 @@
 						"ieee80211w": "optional"
 					},
 					"certificates": {
-						"ca-certificate": "/etc/ucentral/cas.pem",
-						"certificate": "/etc/ucentral/cert.pem",
+						"ca-certificate": "/etc/ucentral/operational.ca",
+						"certificate": "/etc/ucentral/operational.pem",
 						"private-key": "/etc/ucentral/key.pem"
 					},
 					"radius": {

feeds/ucentral/ucentral-schema/files/etc/ucentral/examples/eap_local.json

@@ -37,8 +37,8 @@
 						"ieee80211w": "optional"
 					},
 					"certificates": {
-						"ca-certificate": "/etc/ucentral/cas.pem",
-						"certificate": "/etc/ucentral/cert.pem",
+						"ca-certificate": "/etc/ucentral/operational.ca",
+						"certificate": "/etc/ucentral/operational.pem",
 						"private-key": "/etc/ucentral/key.pem"
 					},
 					"radius": {

feeds/ucentral/ucentral-schema/files/etc/uci-defaults/99-ucentral-poe

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-board=$(board_name)
-case $board in
-	sonicfi,rap630w-311g|\
-	cybertan,eww631-b1)
-		for num in $(seq 1 3)
-		do
-			uci add poe port
-			uci set poe.@port[-1]='port'
-			eval uci set poe.@port[-1].port_num='${num}'
-			uci set poe.@port[-1].admin_mode='1'
-		done
-		uci commit
-		;;
-	*)
-		;;
-esac

profiles/cig_wf189.yml

@@ -13,4 +13,3 @@ packages:
   - ipq53xx
   - ftm
   - qca-ssdk-shell
-  - kmod-cig-poe-judgment 

profiles/cig_wf189h.yml

@@ -12,4 +12,3 @@ include:
 packages:
   - ipq53xx
   - qca-ssdk-shell
-  - kmod-cig-poe-judgment 

profiles/cig_wf189w.yml

@@ -12,4 +12,3 @@ include:
 packages:
   - ipq53xx
   - qca-ssdk-shell
-  - kmod-cig-poe-judgment 

profiles/cig_wf672.yml

@@ -21,4 +21,3 @@ packages:
   - kmod-gpio-pca953x
   - kmod-hwmon-tmp103
   - kmod-iio-ilps22qs
-  - kmod-cig-poe-judgment 

profiles/sonicfi_rap630w-311g.yml

@@ -10,6 +10,5 @@ feeds:
 packages:
   - ipq50xx
   - cooling
-  - poe
 include:
   - ucentral-ap

profiles/zyxel_nwa50be.yml

@@ -1,16 +0,0 @@
----
-profile: zyxel_nwa50be
-target: ipq53xx
-subtarget: generic
-description: Build image for the zyxel nwa50be
-image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-zyxel_nwa50be-squashfs-sysupgrade.tar
-feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-packages:
-  - ipq53xx
-  - qca-ssdk-shell
-include:
-  - ucentral-ap
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0