WIFI-14631 CIG WiFi 7 Product Save crash log into pstore

Signed-off-by: CarosLiang <cliang@actiontec.com>
qca-wifi-7: change patches-zyxel_nwa130be path
2025-10-29 09:32:34 +00:00 · 2025-07-09 15:26:52 +08:00 · 2025-07-09 06:42:18 +02:00 · 2025-07-08 10:25:21 +02:00 · 2025-07-08 09:47:15 +02:00 · 2025-07-08 09:42:57 +02:00
28 changed files with 1176 additions and 22 deletions
--- a/feeds/ipq807x_v5.4/ath11k-wifi/Makefile
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/Makefile
@@ -41,8 +41,10 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
+	emplus-wap380c \
 	emplus-wap385c \
 	emplus-wap386v2 \
+	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -64,8 +66,7 @@ ALLWIFIBOARDS:= \
 	yuncore-fap655 \
 	udaya-a6-id2 \
 	udaya-a6-od2 \
-	meshpp-s618 \
-	emplus-wap581
+	meshpp-s618

 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ath11k-wifi-$(BOARD))

@@ -408,8 +409,10 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
 $(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
 $(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -429,7 +432,6 @@ $(eval $(call generate-ath11k-wifi-package,yuncore-fap655,YunCore FAP655))
 $(eval $(call generate-ath11k-wifi-package,udaya-a6-id2,Udaya A6-ID2))
 $(eval $(call generate-ath11k-wifi-package,udaya-a6-od2,Udaya A6-OD2))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr5018,Wallys DR5018))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap581,emplus-wap581))

 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))
--- a/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap380c.bin.IPQ8074
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap380c.bin.IPQ8074
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds
@@ -20,6 +20,12 @@ edgecore,oap103)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
        ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
+emplus,wap380c)
+	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
+	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
+	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
+	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
+	;;
 sonicfi,rap630w-311g|\
 sonicfi,rap650c|\
 cybertan,eww631-b1)
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network
@@ -12,6 +12,7 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"

 	case $board in
+	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
@@ -72,6 +72,7 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
+	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh
@@ -29,6 +29,7 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	emplus,wap380c|\
 	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
@@ -48,7 +49,8 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-        cig,wf196)
+	cig,wf196|\
+	emplus,wap380c)
                [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                        CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                        CI_BOOTCFG=1
--- a/feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts
+++ b/feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP380C";
+	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
+	qcom,msm-id = <0x143 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp6";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		qti: ledc@191E000  {
+			compatible = "qti,ledc";
+			reg = <0x191E000 0x20070>;
+			reg-names = "ledc_base_addr";
+			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
+									0x00000000 0x00000000 \
+									0x00000000 0xFFFFFFFF \
+									0xFFFF7FFF 0xFFFFFFFF \
+									0x007D0820 0x00000000 \
+									0x10482094 0x03FFFFE1>;
+			qti,ledc_blink_indices_cnt = <6>;
+			qti,ledc_blink_indices = <15 14 13 12 11 10>;
+			qti,ledc_blink_idx_src_pair = <5 20>;
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio52";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			ledc_pins: ledc_pinmux {
+				led_clk {
+					pins = "gpio18";
+					function = "led0";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_data {
+					pins = "gpio19";
+					function = "led1";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_clr {
+					pins = "gpio20";
+					function = "led2";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <4>;
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		dp6 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&apc_cpr {
+	/* Same CPR configuration as OAK */
+	compatible = "qcom,cpr4-ipq817x-apss-regulator";
+
+	thread@0 {
+		apc_vreg: regulator {
+			regulator-min-microvolt = <1>;
+			regulator-max-microvolt = <2>;
+			qcom,cpr-fuse-corners = <2>;
+			qcom,cpr-corners = <3>;
+			qcom,cpr-speed-bin-corners = <3>;
+			qcom,cpr-corner-fmax-map = <1 3>;
+
+			qcom,cpr-voltage-ceiling =
+				<840000 904000 944000>;
+			qcom,cpr-voltage-floor =
+				<592000 648000 712000>;
+			qcom,corner-frequencies =
+				<1017600000 1382400000 1382400000>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				< 20000  26000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0   7000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-floor-to-ceiling-max-range =
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>;
+		};
+	};
+};
+
+&npu_cpr {
+	status = "disabled";
+};
+
+&nss0 {
+	qcom,low-frequency = <187200000>;
+	qcom,mid-frequency = <748800000>;
+	qcom,max-frequency = <1497600000>;
+};
+
+&nss0 {
+	npu-supply = <&dummy_reg>;
+	mx-supply = <&dummy_reg>;
+};
+
+&wifi0 {
+	qcom,board_id = <0x92>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};
+
+&ledc {
+	pinctrl-0 = <&ledc_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+
+	led_power: led0 {
+		label = "ipq::led0";
+		linux,default-trigger = "default-on";
+	};
+
+	wan: led1 {
+		label = "ipq::led1";
+		linux,default-trigger = "netdev";
+	};
+
+	wifi2g: led2 {
+		label = "ipq::led2";
+		linux,default-trigger = "phy1tpt";
+	};
+
+	wifi5g: led3 {
+		label = "ipq::led3";
+		linux,default-trigger = "phy0tpt";
+	};
+
+	led4 {
+		label = "ipq::led4";
+		linux,default-trigger = "none";
+	};
+
+	led5 {
+		label = "ipq::led5";
+		linux,default-trigger = "none";
+	};
+};
--- a/feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk
+++ b/feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk
@@ -57,6 +57,15 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106

+define Device/emplus_wap380c
+  DEVICE_TITLE := Emplus WAP380C
+  DEVICE_DTS := qcom-ipq807x-wap380c
+  DEVICE_DTS_CONFIG=config@hk07
+  SUPPORTED_DEVICES := emplus,wap380c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
+endef
+TARGET_DEVICES += emplus_wap380c
+
 define Device/sonicfi_rap650c
  DEVICE_TITLE := SonicFi RAP650C
  DEVICE_DTS := qcom-ipq807x-rap650c
--- a/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile
+++ b/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile
@@ -0,0 +1,29 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=cig-device-boot
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/cig-device-boot
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+kmod-usb-serial-xr
+  TITLE:=CIG device init
+endef
+
+define Package/cig-device-boot/description
+  Initialize particular functions of the CIG device
+endef
+
+define Build/Compile
+
+endef
+
+define Package/cig-device-boot/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/cig-device.init $(1)/etc/init.d/cig-device-boot
+endef
+
+$(eval $(call BuildPackage,cig-device-boot))
--- a/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init
+++ b/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init
@@ -0,0 +1,7 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot(){
+    [ -e /dev/ttyUSB0 ] && stty -F /dev/ttyUSB0 115200 cs8 -cstopb -parenb -icrnl -onlcr
+}
--- a/feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_sw
+++ b/feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_sw
@@ -3,9 +3,9 @@
 band=$1
 if [ $band -eq 2 ] || [ $band -eq 3 ]; then
 	echo $band > /proc/rf_switch
-	echo "reboot for switch wifi mode 2/3 bands"
+	echo "firstboot for switch wifi mode 2/3 bands"
 	sleep 1
-	reboot
+	firstboot -y -r
 else
 	echo "error band param"
 fi
--- a/feeds/qca-wifi-7/ipq53xx/config-6.1
+++ b/feeds/qca-wifi-7/ipq53xx/config-6.1
@@ -1225,3 +1225,4 @@ CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_RAM=y
 # CONFIG_RTL8221D_PHY is not set
 # CONFIG_INPUT_LSM303AGR is not set
+# CONFIG_USB_SERIAL_XR is not set
--- a/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts
+++ b/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts
@@ -85,6 +85,15 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;

+        ramoops@49c00000 {
+            compatible = "ramoops";
+            no-map;
+            reg = <0x0 0x49c00000 0x0 0x50000>;
+            record-size = <0x20000>;
+            console-size = <0x8000>;
+            pmsg-size = <0x8000>;
+        };
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 			reg = <0x0 0x4a900000 0x0 0x6D00000>;
 			no-map;
--- a/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts
+++ b/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts
@@ -85,6 +85,15 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;

+        ramoops@49c00000 {
+            compatible = "ramoops";
+            no-map;
+            reg = <0x0 0x49c00000 0x0 0x50000>;
+            record-size = <0x20000>;
+            console-size = <0x8000>;
+            pmsg-size = <0x8000>;
+        };
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 			reg = <0x0 0x4a900000 0x0 0x6D00000>;
 			no-map;
--- a/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts
+++ b/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts
@@ -18,6 +18,21 @@
 	model = "CIG WF672";
 	compatible = "cig,wf672", "qcom,ipq5332-rdp468", "qcom,ipq5332";

+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+       ramoops@49c00000 {
+           compatible = "ramoops";
+           no-map;
+           reg = <0x0 0x49c00000 0x0 0x50000>;
+           record-size = <0x20000>;
+           console-size = <0x8000>;
+           pmsg-size = <0x8000>;
+       };
+    };
+
 	aliases {
 		serial0 = &blsp1_uart0;
 		serial1 = &blsp1_uart1;
@@ -59,6 +74,8 @@
 			num_devices = <0x1>;

 			ess-switch@3a000000 {
+				pinctrl-0 = <&sfp_pins>;
+				pinctrl-names = "default";
 				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
@@ -284,7 +301,7 @@

 &blsp1_i2c1 {
 	status = "okay";
-	clock-frequency  = <400000>;
+	clock-frequency  = <100000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	extgpio:pca9555@20{
@@ -442,6 +459,13 @@
                };
 	};

+	sfp_pins: sfp-state {
+		pins = "gpio43";
+		function = "gpio";
+		bias-pull-up;
+		input-enable;
+	};
+
 	spi_0_data_clk_pins: spi-0-data-clk-state {
 		pins = "gpio14", "gpio15", "gpio16";
 		function = "blsp0_spi";
--- a/feeds/qca-wifi-7/mac80211/patches-cig_wf189h/ath12k/993-CIG-add-thermal-and-antenna-control.patch
+++ b/feeds/qca-wifi-7/mac80211/patches-cig_wf189h/ath12k/993-CIG-add-thermal-and-antenna-control.patch
@@ -0,0 +1,181 @@
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
+--- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
+@@ -10451,6 +10451,30 @@
+ 	return 0;
+ }
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
+{
+    int ret;
+    
+    if (!tx_ant || !rx_ant) {
+        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
+        return -EINVAL;
+    }
+
+    /* return if it is no changed */
+    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
+        return 0;
+
+    mutex_lock(&ar->conf_mutex);
+    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
+    if (!ret) {
+        ar->cfg_tx_chainmask = tx_ant;
+        ar->cfg_rx_chainmask = rx_ant;
+    }
+    mutex_unlock(&ar->conf_mutex);
+
+    return ret;
+}
+
+ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
+ {
+ 	int num_mgmt = 0;
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
+--- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
+@@ -168,6 +168,7 @@
+ 
+ extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
+ void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
+ void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
+ void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
+--- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
+@@ -401,8 +401,25 @@
+ 	complete(&ar->thermal.wmi_sync);
+ }
+ 
+static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
+    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
+    struct ath12k *ar = thermal_work->ar;
+    int ret;
+
+    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
+    if (ret) {
+        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
+                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
+    }
+    kfree(thermal_work);
+}
+
+ void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
+ {
+	int temp = ar->thermal.temperature;
+    	u32 tx_mask, rx_mask;
+    	bool need_switch = false;
+
+ 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
+ 	    curr_level >= ENHANCED_THERMAL_LEVELS)
+ 		return;
+@@ -416,7 +433,37 @@
+ 	else
+ 		ar->thermal.throttle_state =
+ 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
+-	spin_unlock_bh(&ar->data_lock);
+	
+	/* configure ant mode */
+	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
+        	tx_mask = 0x1;
+        	rx_mask = 0x1;
+        	need_switch = true;
+    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
+        	tx_mask = ar->thermal.default_tx_chainmask;
+        	rx_mask = ar->thermal.default_rx_chainmask;
+        	need_switch = true;
+    	}
+
+    	spin_unlock_bh(&ar->data_lock);
+
+    /* set param async*/ 
+    if (need_switch) {
+        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
+        if (work) {
+            work->ar = ar;
+            work->tx_mask = tx_mask;
+            work->rx_mask = rx_mask;
+            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
+            schedule_work(&work->work);
+            
+            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
+                       ar->pdev_idx, temp,
+                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
+                       (tx_mask > 0x1) ? "dual" : "single",
+                       curr_level);
+        }
+    }
+ }
+ 
+ static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
+@@ -459,6 +506,11 @@
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
+ 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
+
+                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
+ 		}
+ 	} else {
+ 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
+@@ -494,6 +546,10 @@
+ 	for (i = 0; i < ab->num_radios; i++) {
+ 		pdev = &ab->pdevs[i];
+ 		ar = pdev->ar;
+
+		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
+        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
+
+ 		if (!ar)
+ 			continue;
+ 
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+--- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
+@@ -22,15 +22,15 @@
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
+#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+ #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+@@ -83,6 +83,16 @@
+ 	 * protected by data_lock
+ 	 */
+ 	int temperature;
+
+	u32 default_tx_chainmask;
+    	u32 default_rx_chainmask;
+};
+
+struct ath12k_thermal_work {
+    struct work_struct work;
+    struct ath12k *ar;
+    u32 tx_mask;
+    u32 rx_mask;
+ };
+ 
+ #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION
--- a/feeds/qca-wifi-7/mac80211/patches-cig_wf189w/ath12k/993-CIG-add-thermal-and-antenna-control.patch
+++ b/feeds/qca-wifi-7/mac80211/patches-cig_wf189w/ath12k/993-CIG-add-thermal-and-antenna-control.patch
@@ -0,0 +1,181 @@
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
+--- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
+@@ -10451,6 +10451,30 @@
+ 	return 0;
+ }
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
+{
+    int ret;
+    
+    if (!tx_ant || !rx_ant) {
+        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
+        return -EINVAL;
+    }
+
+    /* return if it is no changed */
+    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
+        return 0;
+
+    mutex_lock(&ar->conf_mutex);
+    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
+    if (!ret) {
+        ar->cfg_tx_chainmask = tx_ant;
+        ar->cfg_rx_chainmask = rx_ant;
+    }
+    mutex_unlock(&ar->conf_mutex);
+
+    return ret;
+}
+
+ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
+ {
+ 	int num_mgmt = 0;
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
+--- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
+@@ -168,6 +168,7 @@
+ 
+ extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
+ void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
+ void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
+ void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
+--- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
+@@ -401,8 +401,25 @@
+ 	complete(&ar->thermal.wmi_sync);
+ }
+ 
+static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
+    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
+    struct ath12k *ar = thermal_work->ar;
+    int ret;
+
+    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
+    if (ret) {
+        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
+                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
+    }
+    kfree(thermal_work);
+}
+
+ void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
+ {
+	int temp = ar->thermal.temperature;
+    	u32 tx_mask, rx_mask;
+    	bool need_switch = false;
+
+ 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
+ 	    curr_level >= ENHANCED_THERMAL_LEVELS)
+ 		return;
+@@ -416,7 +433,37 @@
+ 	else
+ 		ar->thermal.throttle_state =
+ 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
+-	spin_unlock_bh(&ar->data_lock);
+	
+	/* configure ant mode */
+	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
+        	tx_mask = 0x1;
+        	rx_mask = 0x1;
+        	need_switch = true;
+    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
+        	tx_mask = ar->thermal.default_tx_chainmask;
+        	rx_mask = ar->thermal.default_rx_chainmask;
+        	need_switch = true;
+    	}
+
+    	spin_unlock_bh(&ar->data_lock);
+
+    /* set param async*/ 
+    if (need_switch) {
+        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
+        if (work) {
+            work->ar = ar;
+            work->tx_mask = tx_mask;
+            work->rx_mask = rx_mask;
+            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
+            schedule_work(&work->work);
+            
+            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
+                       ar->pdev_idx, temp,
+                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
+                       (tx_mask > 0x1) ? "dual" : "single",
+                       curr_level);
+        }
+    }
+ }
+ 
+ static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
+@@ -459,6 +506,11 @@
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
+ 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
+
+                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
+ 		}
+ 	} else {
+ 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
+@@ -494,6 +546,10 @@
+ 	for (i = 0; i < ab->num_radios; i++) {
+ 		pdev = &ab->pdevs[i];
+ 		ar = pdev->ar;
+
+		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
+        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
+
+ 		if (!ar)
+ 			continue;
+ 
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+--- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
+@@ -22,15 +22,15 @@
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
+#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+ #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+@@ -83,6 +83,16 @@
+ 	 * protected by data_lock
+ 	 */
+ 	int temperature;
+
+	u32 default_tx_chainmask;
+    	u32 default_rx_chainmask;
+};
+
+struct ath12k_thermal_work {
+    struct work_struct work;
+    struct ath12k *ar;
+    u32 tx_mask;
+    u32 rx_mask;
+ };
+ 
+ #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION
--- a/feeds/qca-wifi-7/mac80211/patches-zyxel_nwa130be/ath12k/0001-thermal-thermal-setting.patch
+++ b/feeds/qca-wifi-7/mac80211/patches-zyxel_nwa130be/ath12k/0001-thermal-thermal-setting.patch
--- a/feeds/qca-wifi-7/platform_drivers/Makefile
+++ b/feeds/qca-wifi-7/platform_drivers/Makefile
@@ -475,6 +475,22 @@ endef

 $(eval $(call KernelPackage,usb-f-qdss))

+define KernelPackage/usb-serial-xr
+  TITLE:=USB xr Serial driver support
+  KCONFIG:=CONFIG_USB_SERIAL_XR
+  FILES:=\
+        $(LINUX_DIR)/drivers/usb/serial/xr_serial.ko
+  AUTOLOAD:=$(call AutoLoad,60,xr_serial)
+  DEPENDS:=+kmod-usb-serial
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-serial-xr/description
+ USB MaxLinear/Exar USB to Serial driver
+endef
+
+$(eval $(call KernelPackage,usb-serial-xr))
+
 LEDS_MENU:=LED modules

 define KernelPackage/leds-tlc591xx
--- a/feeds/tip/certificates/files/etc/uci-defaults/99-tip-certificates.sh
+++ b/feeds/tip/certificates/files/etc/uci-defaults/99-tip-certificates.sh
@@ -4,3 +4,4 @@ uci add system certificates
 uci set system.@certificates[-1].key=/etc/ucentral/key.pem
 uci set system.@certificates[-1].cert=/etc/ucentral/operational.pem
 uci set system.@certificates[-1].ca=/etc/ucentral/operational.ca
+uci commit
--- a/feeds/tip/certificates/files/usr/bin/mount_certs
+++ b/feeds/tip/certificates/files/usr/bin/mount_certs
@@ -105,9 +105,10 @@ cig,wf189h|\
 cig,wf186h|\
 cig,wf196|\
 cig,wf188n|\
+emplus,wap380c|\
 emplus,wap385c|\
-emplus,wap581|\
 emplus,wap386v2|\
+emplus,wap581|\
 yuncore,ax840|\
 yuncore,fap655)
 	PART_NAME=rootfs_1
--- a/feeds/tip/cloud_discovery/files/usr/bin/est_client
+++ b/feeds/tip/cloud_discovery/files/usr/bin/est_client
@@ -65,11 +65,11 @@ function p7_too_pem(src, dst) {
 	return 0;
 }

-function call_est_server(cert, target) {
+function call_est_server(path, cert, target) {
 	if (generate_csr(cert))
 		return 1;

-	let ret = system('curl -X POST https://qaest.certificates.open-lan.org:8001/.well-known/est/simpleenroll -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert /etc/ucentral/cert.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
+	let ret = system('curl -X POST https://qaest.certificates.open-lan.org:8001/.well-known/est/' + path + ' -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert ' + cert + ' --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
 	if (ret) {
 		ulog(LOG_INFO, 'Failed to request operational certificate\n');
 		return 1;
@@ -86,7 +86,7 @@ function simpleenroll() {
 		return 0;
 	}

-	if (call_est_server('/etc/ucentral/cert.pem', '/etc/ucentral/operational.pem'))
+	if (call_est_server('simpleenroll', '/etc/ucentral/cert.pem', '/etc/ucentral/operational.pem'))
 		return 1; 
 	
 	ulog(LOG_INFO, 'Operational cert acquired\n');
@@ -100,7 +100,7 @@ function simplereenroll() {
 		return 0;
 	}

-	if (call_est_server('/etc/ucentral/operational.pem', '/tmp/operational.pem'))
+	if (call_est_server('simplereenroll', '/etc/ucentral/operational.pem', '/tmp/operational.pem'))
 		return 1;
 	
 	ulog(LOG_INFO, 'Operational cert updated\n');
@@ -114,7 +114,7 @@ function load_operational_ca() {
 		ulog(LOG_INFO, 'Operational CA is present\n');
 		return 0;
 	}
-	let ret = system('curl -X GET https://qaest.certificates.open-lan.org:8001/.well-known/est/cacerts --cert /etc/ucentral/cert.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.ca.nohdr.p7');
+	let ret = system('curl -X GET https://qaest.certificates.open-lan.org:8001/.well-known/est/cacerts --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.ca.nohdr.p7');
 	if (!ret)
 		ret = p7_too_pem('/tmp/operational.ca.nohdr.p7', '/etc/ucentral/operational.ca');
 	if (ret) {
--- a/feeds/ucentral/ucentral-client/Makefile
+++ b/feeds/ucentral/ucentral-client/Makefile
@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1

 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=7dfeaedf141a6377de2dc6bcd646b1640201f204db42af52777d018700bc991c
+PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-06-27
-PKG_SOURCE_VERSION:=08a842d9921196821a19d52b9061db6c428aab3f
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52

 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
--- a/feeds/ucentral/ucentral-client/files/etc/init.d/ucentral
+++ b/feeds/ucentral/ucentral-client/files/etc/init.d/ucentral
@@ -44,14 +44,15 @@ start_service() {

 	server=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["server"]')
 	port=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["port"]')
+	[ -n "$server" -a -n "$port" ] || return 0

 	boot_cause=$(cat /tmp/pstore | jsonfilter -e '@["pstore"][-1]'.boot_cause)
 	[ -z $boot_cause ] && boot_cause=coldboot
 	procd_open_instance
 	procd_set_param command "$PROG"
 	[ -n "$serial" ] && procd_append_param command -S $serial
-	[ -n "$server" ] && procd_append_param command -s $server
-	[ -n "$port" ] && procd_append_param command -P $port
+	procd_append_param command -s $server
+	procd_append_param command -P $port
 	[ "$debug" -eq 0 ] || procd_append_param command -d
 	[ "$insecure" -eq 0 ] || procd_append_param command -i
 	[ -z "$(mount | grep 'tmpfs on / type tmpfs')" ] || procd_append_param command -r
--- a/feeds/ucentral/ucentral-schema/Makefile
+++ b/feeds/ucentral/ucentral-schema/Makefile
@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1

 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=66f1a0644ae7bf34ecdf409aea45b152dcbf9bf8bf8b731ac1b8d4077fb42c7b
+PKG_MIRROR_HASH:=3857f9adcb12625350ada5274d177540d205f0b77c51129d298bb5d38fb6dbf6
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-07
-PKG_SOURCE_VERSION:=50ba97e1d455a6fd82ab95efe986ac156b472305
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=f3d1356a066daa28f7ee1cf3adc27f09ca742708
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

--- a/patches/0092-ubus-bump-to-latest-HEAD.patch
+++ b/patches/0092-ubus-bump-to-latest-HEAD.patch
@@ -21,7 +21,7 @@ index 82c4dc601a..ea536930ea 100644
 -PKG_MIRROR_HASH:=f4e898eb9207f069652f1767835f6aa9f015df2282d51e50ab57a0c3736f36e3
 +PKG_SOURCE_DATE:=2025-07-02
 +PKG_SOURCE_VERSION:=5952b48e251c0ea76dfce97f129da6f18d889eda
-+PKG_MIRROR_HASH:=60edfc101eaa85976d243febc368fc419fe44283bd3a743851a6bc7975e881f0
+PKG_MIRROR_HASH:=3285485a4d9d0e62e4abcfb004d2be0bec7b5ebc564c68030be0c35f0bc223c4
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 
--- a/profiles/cig_wf672.yml
+++ b/profiles/cig_wf672.yml
@@ -15,6 +15,7 @@ packages:
  - qca-ssdk-shell
  - iperf3
  - sysstat
+  - cig-device-boot
  - kmod-cig-wifi-mode-sw
  - kmod-input-lsm303agr
  - kmod-rtl8221d-phy
@@ -22,3 +23,6 @@ packages:
  - kmod-hwmon-tmp103
  - kmod-iio-ilps22qs
  - kmod-cig-poe-judgment 
+diffconfig: |
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_STTY=y
--- a/profiles/emplus_wap380c.yml
+++ b/profiles/emplus_wap380c.yml
@@ -0,0 +1,21 @@
+---
+profile: emplus_wap380c
+target: ipq807x
+subtarget: generic
+description: Build image for the Emplus WAP380C
+image: bin/targets/ipq807x/generic/openwrt-ipq807x-emplus_wap380c-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq807x
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
Author	SHA1	Message	Date
CarosLiang	e13636535f	WIFI-14631 CIG WiFi 7 Product Save crash log into pstore Signed-off-by: CarosLiang <cliang@actiontec.com>	2025-07-09 15:26:52 +08:00
YenLin Pan	f67a2c404b	qca-wifi-7: change patches-zyxel_nwa130be path The original path cannot be patched Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>	2025-07-09 06:42:18 +02:00
John Crispin	974351335f	ucentral-schema: update to latest HEAD f3d1356 add reenroll command Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 10:25:21 +02:00
Justin.Guo	311b1a620c	cig-device-boot: update WF672A configuration * Reduce the i2c frequency to enable the encryption chip to be recognized * Add USB xr Serial driver and init gps uart param * Factory reset when switching wifi mode * SFP gpio should be input mode Fixes: WIFI-14789 Signed-off-by: Justin.Guo <guoxijun@actiontec.com>	2025-07-08 09:47:15 +02:00
John Crispin	066b442247	ucentral-client: prevent client from starting before cloud was discovered Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:42:57 +02:00
John Crispin	f2b69ce972	est_client: fix reenroll call the wrong certificate was being used Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:41:12 +02:00
John Crispin	88830b2537	ucentral-client: update to latest HEAD 69829f6 Revert "Cloud Package Manager" c3a3e05 remove certupdate from proto.c 4c4710a add reenroll to proto.c Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:40:30 +02:00
John Crispin	842b21fb5e	certificates: add an explicit uci commit call Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:40:06 +02:00
John Crispin	8f8eb63ac4	ubus: fix PKG_MIRROR_HASH Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 08:45:48 +02:00
Justin.Guo	367a919d67	qca-wifi-7: WF-189w/h add temperature control 1.Change the WiFi temperature threshold. 2.Use single antenna when temperature is too high. Fixes: WIFI-14788 Signed-off-by: Justin.Guo <guoxijun@actiontec.com>	2025-07-08 08:14:39 +02:00
Jesse Wu	919fe12372	ipq807x: add EMPLUS WAP380C support Fixes: WIFI-14791 Signed-off-by: Jesse Wu <Jesse.Wu@emplustech.com>	2025-07-08 08:13:39 +02:00