WIFI-14901: Add self-healing in ucentral-state and channel switching improvements to RRM with channel utilization

Signed-off-by: Tanya Singh <tanya_singh@accton.com>

feeds/ipq807x_v5.4/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude || 0;
-let longitude = gps_info.longitude || 0;
+let latitude = gps_info.latitude ?? 0;
+let longitude = gps_info.longitude ?? 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation || 0;
+afc_location.height = gps_info.elevation ?? 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = int(gps_info.major_axis) || 1;
-afc_location.minor_axis = int(gps_info.minor_axis) || 1;
-afc_location.orientation = gps_info.major_orientation || 0;
-afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
+afc_location.major_axis = gps_info.major_axis ?? 0;
+afc_location.minor_axis = gps_info.minor_axis ?? 0;
+afc_location.orientation = gps_info.major_orientation ?? 0;
+afc_location.vertical_tolerance = gps_info.vdop ?? 0;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/ipq807x_v5.4/hostapd/files/hostapd.uc

@@ -1,8 +1,7 @@
 let libubus = require("ubus");
-import { open, readfile, writefile } from "fs";
+import { open, readfile } from "fs";
 import { wdev_create, wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open } from "common";
 
-let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -894,24 +893,10 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let wireless_config = uci.get_all('wireless');
-		for (let l, afc_server in wireless_config) {
-			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
-				hostapd.printf(`Sending AFC request: ${data}`);
-				writefile("/tmp/afc-request.json", data);
-
-				if (afc_server.access_token)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-				else if (afc_server.cert)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-
-				let afc_response = (readfile("/tmp/afc-response.json"));
-				if (afc_response)
-					return afc_response;
-				else
-					return;
-			}
-		}
+		let ret = ubus.call("afc", "request", { data });
+		if (type(ret) != "object")
+			return;
+		return ret.data;
 	},
 	bss_add: function(name, obj) {
 		bss_event("add", name);

feeds/qca-wifi-7/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude || 0;
-let longitude = gps_info.longitude || 0;
+let latitude = gps_info.latitude ?? 0;
+let longitude = gps_info.longitude ?? 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation || 0;
+afc_location.height = gps_info.elevation ?? 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = int(gps_info.major_axis) || 1;
-afc_location.minor_axis = int(gps_info.minor_axis) || 1;
-afc_location.orientation = gps_info.major_orientation || 0;
-afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
+afc_location.major_axis = gps_info.major_axis ?? 0;
+afc_location.minor_axis = gps_info.minor_axis ?? 0;
+afc_location.orientation = gps_info.major_orientation ?? 0;
+afc_location.vertical_tolerance = gps_info.vdop ?? 0;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/qca-wifi-7/hostapd/files/hostapd.uc

@@ -1,8 +1,7 @@
 let libubus = require("ubus");
-import { open, readfile, writefile } from "fs";
+import { open, readfile } from "fs";
 import { wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open, wdev_set_radio_mask } from "common";
 
-let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -1007,6 +1006,7 @@ let main_obj = {
 hostapd.data.ubus = ubus;
 hostapd.data.obj = ubus.publish("hostapd", main_obj);
 
+
 let auth_obj = {};
 hostapd.data.auth_obj = ubus.publish("hostapd-auth", auth_obj);
 
@@ -1026,24 +1026,10 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let wireless_config = uci.get_all('wireless');
-		for (let l, afc_server in wireless_config) {
-			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
-				hostapd.printf(`Sending AFC request: ${data}`);
-				writefile("/tmp/afc-request.json", data);
-
-				if (afc_server.access_token)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-				else if (afc_server.cert)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-
-				let afc_response = (readfile("/tmp/afc-response.json"));
-				if (afc_response)
-					return afc_response;
-				else
-					return;
-			}
-		}
+		let ret = ubus.call("afc", "request", { data });
+		if (type(ret) != "object")
+			return;
+		return ret.data;
 	},
 	bss_create: function(phy, name, obj) {
 		phy = hostapd.data.config[phy];

feeds/qca-wifi-7/qca-ssdk-qca/Makefile

@@ -100,7 +100,6 @@ endif
 ifdef CONFIG_TARGET_PROFILE
 TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
 PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-FILES_PROFILE_NAME=files-$(subst DEVICE_,,$(TARGET_PROFILE))
 endif
 
 QCASSDK_CONFIG_OPTS+= TOOL_PATH=$(TOOLCHAIN_BIN_PATH) \
@@ -203,15 +202,6 @@ define patch_profile
 	$(call PatchDir/Default,$(PKG_BUILD_DIR),./$(PATCH_PROFILE_NAME))
 endef
 
-define files_profile
-
-	if [ -d "./$(FILES_PROFILE_NAME)" ]; then \
-		$(CP) ./$(FILES_PROFILE_NAME)/* ./files/ ; \
-	fi
-endef
-
 Hooks/Prepare/Post += patch_profile
-Hooks/Prepare/Post += files_profile
-
 $(eval $(call KernelPackage,qca-ssdk-qca-nohnat))
 $(eval $(call KernelPackage,qca-ssdk-qca-hnat))

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa130be/qca-ssdk

@@ -1,317 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
-# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-
-START=16
-
-#!/bin/sh
-ruletype="ip4 ip6"
-side="wan lan"
-qwan="1 3 2 0 5 7 6 4"
-qlan="0 1 2 3 4 5 6 7"
-
-function create_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		#echo $queue
-		#echo "creating list $listid"
-		ssdk_sh acl list create $listid 255
-		ruleid=0
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
-				#echo $cmd
-				if [ "$rt" == "ip4" ];then
-					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				else
-					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				fi
-				if [ $ruleid -le 3 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				elif [ $ruleid -le 7 ];then
-					#zero dscp
-					cmd="$cmd n"
-				elif [ $ruleid -le 11 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				else
-					#zero dscp
-					cmd="$cmd n"
-				fi
-				p=$((ruleid/2))
-				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
-				#echo $cmd
-				$cmd
-				ruleid=`expr $ruleid + 1`
-			done
-		done
-		ssdk_sh acl list bind $listid 0 1 $portmap
-	done
-}
-
-function create_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 0
-	ssdk_sh cosmap pri2q set 3 0
-	ssdk_sh cosmap pri2q set 4 1
-	ssdk_sh cosmap pri2q set 5 1
-	ssdk_sh cosmap pri2q set 6 1
-	ssdk_sh cosmap pri2q set 7 1
-	ssdk_sh cosmap pri2ehq set 0 0
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 0
-	ssdk_sh cosmap pri2ehq set 3 0
-	ssdk_sh cosmap pri2ehq set 4 1
-	ssdk_sh cosmap pri2ehq set 5 1
-	ssdk_sh cosmap pri2ehq set 6 1
-	ssdk_sh cosmap pri2ehq set 7 1
-}
-
-function create_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-
-	ssdk_sh acl list create 56 48
-	#action bypass eg stp check
-	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
-	if [ "$chip_ver" == "0x2000" ]; then
-		action="$action n n 0"
-	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		action="$action n n n 0"
-	else
-		action="$action 0"
-	fi
-
-	for ruleid in $( seq 0 2 )
-	do
-		if [ "$ruleid" == "0" ];then
-			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
-		elif [ "$ruleid" == "1" ];then
-			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		else
-			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		fi
-		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-			cmd="$cmd n $action"
-		else
-			cmd="$cmd $action"
-		fi
-		#echo $cmd
-		$cmd
-	done
-	ssdk_sh acl list bind 56 0 2 1
-}
-
-function delete_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		ssdk_sh acl list unbind $listid 0 1 $portmap
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule del $listid 0 1"
-				echo $cmd
-				$cmd
-			done
-		done
-		#echo "deleting list $listid"
-		ssdk_sh acl list destroy $listid
-	done
-}
-
-function delete_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 1
-	ssdk_sh cosmap pri2q set 3 1
-	ssdk_sh cosmap pri2q set 4 2
-	ssdk_sh cosmap pri2q set 5 2
-	ssdk_sh cosmap pri2q set 6 3
-	ssdk_sh cosmap pri2q set 7 3
-	ssdk_sh cosmap pri2ehq set 0 1
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 2
-	ssdk_sh cosmap pri2ehq set 3 2
-	ssdk_sh cosmap pri2ehq set 4 3
-	ssdk_sh cosmap pri2ehq set 5 3
-	ssdk_sh cosmap pri2ehq set 6 4
-	ssdk_sh cosmap pri2ehq set 7 5
-}
-
-function delete_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-	ssdk_sh acl list unbind 56 0 2 1
-	ssdk_sh acl rule del 56 0 1
-	ssdk_sh acl rule del 56 1 1
-	ssdk_sh acl rule del 56 2 1
-	ssdk_sh acl list destroy 56
-}
-
-function edma_war_config_add(){
-	create_war_cosmap
-	ssdk_sh acl status set enable
-	create_war_acl_rules
-}
-
-function edma_war_config_del(){
-	delete_war_acl_rules
-	delete_war_cosmap
-}
-
-function ipq50xx_serdes_monitor () {
-	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
-	port_id=2
-	old_linkstatus="DISABLE"
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set 29 0xb 0x300d
-		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-
-		while true
-		do
-			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
-			#when qca808x phy link status is from down to up, serdes tx would be enabled
-			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0xb00d
-				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
-			fi
-			#when qca808x phy link status is from up to down, serdes tx would be disabled
-			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0x300d
-				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-			fi
-			old_linkstatus=$cur_linkstatus
-		done
-	fi
-}
-
-function ipq53xx_phy_amplitude_set () {
-	#for qca808x phy sgmii, set half amplitude with src_half_swing register
-	port_id=2
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd180" ]; then
-		ssdk_sh debug phy set 5 0x40010087 0x208a
-		ssdk_sh debug phy set 6 0x40010087 0x208a
-		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
-		ampl_val=$(eval "ssdk_sh debug phy get 5 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 5 0x40010067 $ampl_val
-		ampl_val=$(eval "ssdk_sh debug phy get 6 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 6 0x40010067 $ampl_val
-	fi
-}
-
-function ipq53xx_uniphy_amplitude_set () {
-	#for ipq50xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
-	ssdk_sh debug uniphy set 0 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 0 0x24 0 4
-	ssdk_sh debug uniphy set 1 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 1 0x24 0 4
-}
-
-ssdk_dependency() {
-	counter=0
-	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
-		insmod qca-ssdk.ko
-	}
-	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
-	do
-		sleep 1
-		counter=$((counter+1))
-	done
-}
-
-start() {
-	ssdk_dependency
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to enable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_add
-		echo ''
-	fi
-	#The following commands should be uncommented to add acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#create_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	#The following commands should be uncommented to enable WAR for ipq50xx
-	chip_type_info=`cat tmp/sysinfo/model`
-	result=$(echo $chip_type_info | grep "IPQ5018")
-	if [ "$result" != "" ]; then
-		#ipq50xx_serdes_monitor &
-		#ipq50xx_uniphy_amplitude_set
-		#ipq50xx_phy_amplitude_set
-		echo ''
-	fi
-	if [ "$chip_ver" = "0x2001" ]; then
-		ipq53xx_uniphy_amplitude_set
-		ipq53xx_phy_amplitude_set
-		echo ''
-	fi
-	echo starting
-}
-
-stop() {
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to disable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_del
-		echo ''
-	fi
-	#The following commands should be uncommented to delete acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#delete_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	echo stoping
-}

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -20,7 +20,6 @@ copy_certificates() {
 	[ -z "$country" ] && country=US
 	echo "options cfg80211 ieee80211_regdom="$country > /etc/modules.conf 
 	echo -n $country > /etc/ucentral/country
-	sync
 	exit 0
 }
 

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -6,16 +6,13 @@ check_certificates() {
 
 check_certificates
 
-tar_part_lookup() {
-	part="$(fw_printenv -n cert_part)"
-	if [ "$part" -eq 0 ]; then
-		echo "$2"
-		part=1
-	else
-		echo "$1"
-		part=0
-	fi
-	fw_setenv cert_part $part
+bootconfig_lookup() {
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG"
+		;;
+	1)	echo "0:BOOTCONFIG1"
+		;;
+	esac
 }
 
 . /lib/functions.sh
@@ -38,39 +35,13 @@ sonicfi,rap7*)
 		[ -n "$mtd" ] && mount -t ext4 /dev/mtdblock$mtd /certificates
 	fi
 	if [ ! -f /certificates/cert.pem ] || [ ! -f /certificates/key.pem ]; then
-		part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-		if [ -n "part" ]; then
-			mmc_dev=$(echo $(find_mmc_part "$part") | sed 's/^.\{5\}//')
+		bootconfig=$(bootconfig_lookup)
+		if [ -n "$bootconfig" ]; then
+			mmc_dev=$(echo $(find_mmc_part "$bootconfig") | sed 's/^.\{5\}//')
 			[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
 		fi
 	fi
 	;;
-udaya,a5-id2)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-	part=$(tar_part_lookup "insta1" "insta2")
-	if [ -n "insta" ]; then
-		mtd=$(find_mtd_index $part)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
-	fi
-	;;
-sonicfi,rap6*)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-	part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-	if [ -n "$part" ]; then
-		mtd=$(find_mtd_index $part)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
-	fi
-	;;
 *)
 	mtd=$(find_mtd_index certificates)
 

feeds/tip/certificates/files/usr/bin/store_certs

@@ -1,43 +1,25 @@
 #!/bin/sh
 
-tar_part_lookup() {
-	part="$(fw_printenv -n cert_part)"
-	if [ "$part" -eq 0 ]; then
-		echo "$2"
-		part=1
-	else
-		echo "$1"
-		part=0
-	fi
-	fw_setenv cert_part $part
+bootconfig_lookup() {
+	bootconfig="$(fw_printenv -n cert_part)"
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG1"
+		bootconfig=1
+		;;
+	*)	echo "0:BOOTCONFIG"
+		bootconfig=0
+		;;
+	esac
+	fw_setenv cert_part $bootconfig
 }
 
 . /lib/functions.sh
 case "$(board_name)" in
 sonicfi,rap7110c-341x)
 	cd /certificates
-	tar cf /tmp/certs.tar .
-	part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-	mmc_dev=$(echo $(find_mmc_part $part) | sed 's/^.\{5\}//')
-	dd if=/tmp/certs.tar of=/dev/$mmc_dev
-	;;
-udaya,a5-id2)
-	cd /certificates
-	tar cf /tmp/certs.tar .
-	part=$(tar_part_lookup "insta1" "insta2")
-	mtd=$(find_mtd_index $part)
-	dd if=/tmp/certs.tar of=/dev/mtdblock$mtd
-	;;
-sonicfi,rap6*)
-	if [ "$(fw_printenv -n store_certs_disabled)" != "1" ]; then
-		cd /certificates
-		tar cf /tmp/certs.tar .
-		part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-		mtd=$(find_mtd_index $part)
-		block_size=$(cat /sys/class/mtd/mtd$mtd/size)
-		dd if=/tmp/certs.tar of=/tmp/certs_pad.tar bs=$block_size conv=sync
-		mtd write /tmp/certs_pad.tar /dev/mtd$mtd
-		rm -f /tmp/certs.tar /tmp/certs_pad.tar
-	fi
+	tar cf /tmp/certs.tar
+	bootconfig=$(bootconfig_lookup)
+	mmc_dev=$(echo $(find_mmc_part $bootconfig) | sed 's/^.\{5\}//')
+	dd if=/tmp/certs.tar of=/dev/$bootconfig
 	;;
 esac

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -91,7 +91,6 @@ function gateway_write(data) {
 	}
 	if (changed)
 		fs.writefile('/etc/ucentral/gateway.json', new);
-		system('sync');
 	return changed;
 }
 

feeds/ucentral/ucentral-client/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=34c912efa9c0dcdbc6122296e236993484b24b3bc4de51608356304afc8df1c3
+PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-27
-PKG_SOURCE_VERSION:=c536f6957bd96e57301f9d540b75460119d2a69a
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/config/ucentral

@@ -6,9 +6,9 @@ config ucentral config
 	option reporting	10
 
 config timeouts timeouts
-	option offline		14400
+	option offline		120
 	option validate		120
-	option orphan		7200
+	option orphan		120
 
 #config event
 #	option type  dhcp

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=45575f1f345368d109f74dc5ae3c8648dadbebef37e2d8eadc95b4fca2fbf43f
+PKG_MIRROR_HASH:=9b12cf94b94688aaf2245742ac1cd3d7a2bccade7e248c47c5f13a3dd7c07401
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-30
-PKG_SOURCE_VERSION:=30c73745c104d56f58d4f457956fe7ebac6e0f86
+PKG_SOURCE_DATE:=2025-07-11
+PKG_SOURCE_VERSION:=b971b73d4cedae6175926373adcdc37a04ced11c
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

patches/0095-toolchain-use-older-gcc11-for-legacy-targets.patch

@@ -1,37 +0,0 @@
-From 0b83834085bf536183b0683f4f86800dbe1e2d39 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 28 Jul 2025 07:49:07 +0200
-Subject: [PATCH] toolchain: use older gcc11 for legacy targets
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- toolchain/binutils/Config.version | 1 +
- toolchain/gcc/Config.version      | 1 +
- 2 files changed, 2 insertions(+)
-
-diff --git a/toolchain/binutils/Config.version b/toolchain/binutils/Config.version
-index c9f8584480..5393d389a5 100644
---- a/toolchain/binutils/Config.version
-+++ b/toolchain/binutils/Config.version
-@@ -1,6 +1,7 @@
- 
- config BINUTILS_VERSION_2_37
- 	bool
-+	default y if TARGET_ipq40xx
- 
- config BINUTILS_VERSION_2_38
- 	bool
-diff --git a/toolchain/gcc/Config.version b/toolchain/gcc/Config.version
-index 7126a0c883..b7de3d00e3 100644
---- a/toolchain/gcc/Config.version
-+++ b/toolchain/gcc/Config.version
-@@ -1,5 +1,6 @@
- config GCC_VERSION_11
- 	default y if GCC_USE_VERSION_11
-+	default y if TARGET_ipq40xx
- 	bool
- 
- config GCC_VERSION_13
--- 
-2.34.1
-

profiles/edgecore_spw2ac1200.yml

@@ -1,12 +0,0 @@
----
-profile: edgecore_spw2ac1200
-target: ipq40xx
-subtarget: generic
-description: Build image for the Edgecore spw2ac1200
-image: bin/targets/ipq40xx/generic/openwrt-ipq40xx-generic-edgecore_spw2ac1200-squashfs-nand-sysupgrade.bin
-packages:
-  - ipq40xx
-include:
-  - ucentral-ap
-  - hostapd
-  - target-ipq40xx

profiles/hfcl_ion4.yml

@@ -1,12 +0,0 @@
----
-profile: hfcl_ion4
-target: ipq40xx
-subtarget: generic
-description: Build image for the HFCL ION4
-image: bin/targets/ipq40xx/generic/openwrt-ipq40xx-generic-hfcl_ion4-squashfs-nand-sysupgrade.bin
-packages:
-  - ipq40xx
-include:
-  - ucentral-ap
-  - hostapd
-  - target-ipq40xx