Merge branch 'main' into WIFI-14644-AP72TIP-support-dual-image-and-fix-reset-button-issue

Signed-off-by: mike_ding <mike_ding@sdc.sercomm.com>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/files/hostapd.sh

@@ -117,6 +117,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -160,7 +162,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -259,6 +261,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -467,9 +471,6 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -723,8 +724,7 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request 
+		vendor_elements fils uci_section dynamic_probe_resp
 
 	set_default fils 0
 	set_default isolate 0
@@ -778,8 +778,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/hostapd/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/hostapd/hostapd/src/src/ap/ubus.c

@@ -1944,21 +1944,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/hostapd/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -41,10 +41,6 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
-	emplus-wap380c \
-	emplus-wap385c \
-	emplus-wap386v2 \
-	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -58,7 +54,6 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
 	sonicfi-rap650c \
-	sonicfi-rap630e \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -409,10 +404,6 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -421,7 +412,6 @@ $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630e,SonicFi RAP630E))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/cooling/files/cooling.init

@@ -18,11 +18,9 @@ start() {
 	[ "$enabled" -gt 0 ] || return 1
 
 	case "$board" in
-		sonicfi,rap630c-311g)
-		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630c-311g-cooling.conf
-		;;
-		sonicfi,rap630w-311g)
-		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630w-311g-cooling.conf
+	sonicfi,rap630c-311g|\
+	sonicfi,rap630w-311g)
+        service_start /usr/sbin/cooling
 		;;
 	esac
 

feeds/ipq807x_v5.4/cooling/src/cooling.c

@@ -28,270 +28,143 @@
 
 #define CUR_STATE_PATH "/sys/devices/virtual/thermal/cooling_device%i/cur_state"
 #define TEMPER_PATH "/sys/devices/virtual/thermal/thermal_zone%i/temp"
-#define CPU_FREQ_PATH "/sys/devices/system/cpu/cpu0/cpufreq/%s"
 
 #define PATH_MAX 256
-#define BUF_MAX 32
+#define BUF_MAX 8
+#define THERSHOLD_MAX 20
 #define PHY0 0
 #define PHY1 1
-#define NUM_VALUES 4
-
-int load_config_file=0;
-
-//#define ULOG_INFO(fmt, ...) ulog(LOG_INFO, fmt, ## __VA_ARGS__)
 
 typedef unsigned char	u8;
-typedef unsigned long	u32;
 
 u8 w2g_threshold_level=0;
 u8 w5g_threshold_level=0;
 u8 w2g_cur_temper=0;
 u8 w5g_cur_temper=0;
-u32 level_cpu_freq=1008000;
 
-/* default value of wifi thresholds*/
+
 #ifdef PLATFORM_RAP630C_311G
-u8 level_2g_high[4]={105, 110, 115, 120};
-u8 level_2g_low[4]={0, 105, 110, 115};
-u8 level_2g_mitigation[4]={0, 35, 50, 70};
-u8 level_5g_high[4]={105, 110, 115, 120};
-u8 level_5g_low[4]={0, 105, 110, 115};
-u8 level_5g_mitigation[4]={0, 20, 30, 50};
-u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
+u8 level_2g_lo[4]={0, 105, 110, 115};
+u8 level_2g_hi[4]={105, 110, 115, 120};
+u8 level_2g_limit[4]={0, 35, 50, 70};
+u8 level_5g_lo[4]={0, 105, 110, 115};
+u8 level_5g_hi[4]={105, 110, 115, 120};
+u8 level_5g_limit[4]={0, 20, 30, 50};
 #endif
 
 #ifdef PLATFORM_RAP630W_311G
-u8 level_2g_high[4]={105, 110, 115, 120};
-u8 level_2g_low[4]={0, 105, 110, 115};
-u8 level_2g_mitigation[4]={0, 20, 50, 70};
-u8 level_5g_high[4]={105, 110, 115, 120};
-u8 level_5g_low[4]={0, 105, 110, 115};
-u8 level_5g_mitigation[4]={0, 20, 50, 70};
-u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
+u8 level_2g_lo[4]={0, 105, 110, 115};
+u8 level_2g_hi[4]={105, 110, 115, 120};
+u8 level_2g_limit[4]={0, 20, 50, 70};
+u8 level_5g_lo[4]={0, 105, 110, 115};
+u8 level_5g_hi[4]={105, 110, 115, 120};
+u8 level_5g_limit[4]={0, 20, 50, 70};
 #endif
 
 static char *config_file = NULL;
+char temp[4][BUF_MAX];
 
-typedef struct {
-    int thresholds_high[NUM_VALUES];
-    int thresholds_low[NUM_VALUES];
-    int mitigation[NUM_VALUES];
-    int cpu_freq[NUM_VALUES];
-} WifiConfig;
+#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
 
-WifiConfig wifi2g = {0}, wifi5g = {0};
-
-static void set_cpu_freq (int freq) {
-	FILE * fp;
-	char filename[PATH_MAX];
-
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_governor");
-
-	fp = fopen(filename, "w");
-	if (!fp) {
-		ULOG_ERR("open scaling_governor error\n");
-	}
-	fprintf(fp, "%s", "userspace");
-	fclose(fp);
-
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_setspeed");
-
-	fp = fopen(filename, "w");
-	if (!fp) {
-		ULOG_ERR("open scaling_setspeed error\n");
-	}
-	fprintf(fp, "%d", freq);
-	fclose(fp);
-}
-
-void parse_line(const char* line, const char* key, int* array) {
-	char label[64];
-	int values[NUM_VALUES];
-	int i;
-
-	if (sscanf(line, "%s %d %d %d %d %d", label, &values[0], &values[1], &values[2], &values[3], &values[4]) == 5) {
-		for (i = 0; i < NUM_VALUES; ++i) {
-			array[i] = values[i];
-		}
-	}
-}
-
-int load_config() {
-	FILE * fp = fopen(config_file, "r");
-	if (!fp) {
-		ULOG_ERR("open config file error\n");
-		return 1;
-	}
-
-	WifiConfig* current_config = NULL;
-	char line[256];
-
-	while (fgets(line, sizeof(line), fp)) {
-		if (strstr(line, "[wifi2g]")) {
-			current_config = &wifi2g;
-		} else if (strstr(line, "[wifi5g]")) {
-			current_config = &wifi5g;
-		} else if (current_config) {
-			if (strstr(line, "thresholds_high")) {
-				parse_line(line, "thresholds_high", current_config->thresholds_high);
-			} else if (strstr(line, "thresholds_low")) {
-				parse_line(line, "thresholds_low", current_config->thresholds_low);
-			} else if (strstr(line, "mitigation")) {
-				parse_line(line, "mitigation", current_config->mitigation);
-			} else if (strstr(line, "CPU_freq")) {
-				parse_line(line, "CPU_freq", current_config->cpu_freq);
-			}
-		}
-	}
-
-	fclose(fp);
-	set_cpu_freq(wifi5g.cpu_freq[0]);
-
-	return 0;
-}
-
-int load_default_config(){
-	int i=0;
-
-	set_cpu_freq(1008000);
-	for (i = 0; i < NUM_VALUES; i++) {
-		wifi2g.thresholds_high[i]=level_2g_high[i];
-		wifi2g.thresholds_low[i]=level_2g_low[i];
-		wifi2g.mitigation[i]=level_2g_mitigation[i];
-		wifi2g.cpu_freq[i]=level_cpu_frequency[i];
-		wifi5g.thresholds_high[i]=level_5g_high[i];
-		wifi5g.thresholds_low[i]=level_5g_low[i];
-		wifi5g.mitigation[i]=level_5g_mitigation[i];
-		wifi5g.cpu_freq[i]=level_cpu_frequency[i];
-	}
-	return 0;
-
-}
-
-static void write_cur_state (const char *filename, int state) {
+static void write_cur_state (char *filename, int state) {
 	FILE * fp;
 
+	ULOG_DBG("write_cur_state filename=[%s] [%d]\n", filename, state);
 	fp = fopen(filename, "w");
 	if (!fp){
-		ULOG_ERR("open %s file error\n",filename);
+		ULOG_ERR("some kind of error write cur_state\n");
 	}
 	fprintf(fp, "%d", state);
 	fclose(fp);
 }
 
-int read_cur_state(const char *filename, char *buf, size_t buffer) {
-	FILE *fp;
-	
+static void read_cur_state (char *filename, char *buffer) {
+	FILE * fp;
+
 	fp = fopen(filename, "r");
-	if (!fp) {
-		ULOG_ERR("open %s file error\n",filename);
-		return -1;
+	if (!fp){
+		ULOG_ERR("some kind of error write cur_state\n");
 	}
-	if (!fgets(buf, buffer, fp)) {
-		ULOG_ERR("Failed to read %s file\n", filename);
-		fclose(fp);
-		return -1;
+	if (0 == fread(buffer, sizeof(char), 3, fp)) {
+		ULOG_ERR("some kind of error read value\n");
 	}
 	fclose(fp);
-	return 0;
 }
 
-
 static void wifi_get_temperature() {
 	char filename[PATH_MAX];
-	char buffer[BUF_MAX];
+	FILE * fp;
 	int i = 0;
-
-//	ULOG_INFO("=================================\n");
-
-	/* read cpuinfo_cur_freq*/
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "cpuinfo_cur_freq");
-
-	memset(buffer, 0, BUF_MAX);
-	read_cur_state(filename, buffer, sizeof(buffer));
-//	ULOG_INFO("CPU current frequency: %s\n", buffer);
+	char buffer[BUF_MAX];
 
 	/* get current phy cooling state*/
-	for (i=0; i <= 1; i++) {
+	for (i=0 ; i <= 1; i++ ) {
 		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
-		read_cur_state(filename, buffer, sizeof(buffer));
-//		ULOG_INFO("Phy%i cur_state is: %s\n", i, buffer);
+		read_cur_state(filename, buffer);
+		ULOG_DBG("read from Phy%i cur_state is %s\n", i, buffer);
 	}
 
-	for (i=0; i <= 3; i++) {
-		memset(buffer, 0, BUF_MAX);
+	for (i=0 ; i <= 3; i++ ) {
 		snprintf(filename, PATH_MAX, TEMPER_PATH, i);
-		read_cur_state(filename, buffer, sizeof(buffer));
-//		ULOG_INFO("thermal_zone%i cur_temp is: %s\n", i, buffer);
-
-		if (i == 0)
-			w2g_cur_temper=atoi(buffer);
-		else if (i == 3)
-			w5g_cur_temper=atoi(buffer);
-	}
-
-	if (w5g_cur_temper >= 120)
-	{
-		ULOG_ERR("!! Temperature is over %d degree, system will reboot\n", w5g_cur_temper);
-		sync();
-		if ( -1 != system("reboot &") ){
-			printf("sysyem reboot...\n");
+		fp = fopen(filename, "r");
+		if (!fp) {
+			ULOG_ERR("some kind of error open value\n");
 		}
+		memset(temp[i], 0, BUF_MAX);
+		if (0 == fread(temp[i], sizeof(char), 3, fp)) {
+			ULOG_ERR("some kind of error read value\n");
+		}
+		fclose(fp);
+		ULOG_DBG("thermal_zone%i cur_temp is %s\n", i, temp[i]);
 	}
+
+	w2g_cur_temper=atoi(temp[0]);
+	w5g_cur_temper=atoi(temp[3]);
 }
 
 static void wifi_set_cooling() {
 	char filename[PATH_MAX];
 	int level;
 
-	for (level = 0; level <= 3; level++) {
-		if (w2g_cur_temper >= wifi2g.thresholds_low[level] && w2g_cur_temper < wifi2g.thresholds_high[level]) {
-//			ULOG_INFO("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
+	for (level=0 ; level<=3 ; level++) {
+		if (w2g_cur_temper >= level_2g_lo[level] && w2g_cur_temper < level_2g_hi[level]) {
+			ULOG_DBG("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
 			if (w2g_threshold_level != level) {
-//				ULOG_INFO("setting 2G reduce %d percent\n" ,wifi2g.mitigation[level]);
+				ULOG_DBG("setting 2G reduce %d percent\n" ,level_2g_limit[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY0);
-				write_cur_state(filename, wifi2g.mitigation[level]);
+				write_cur_state(filename, level_2g_limit[level]);
 				w2g_threshold_level = level;
 			}
 		}
-		if (w5g_cur_temper >= wifi5g.thresholds_low[level] && w5g_cur_temper < wifi5g.thresholds_high[level]) {
-//			ULOG_INFO("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
+		if (w5g_cur_temper >= level_5g_lo[level] && w5g_cur_temper < level_5g_hi[level]) {
+			ULOG_DBG("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
 			if (w5g_threshold_level != level) {
-//				ULOG_INFO("setting 5G reduce %d percent\n" ,wifi5g.mitigation[level]);
+				ULOG_DBG("setting 5G reduce %d percent\n" ,level_5g_limit[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY1);
-				write_cur_state(filename, wifi5g.mitigation[level]);
+				write_cur_state(filename, level_5g_limit[level]);
 				w5g_threshold_level = level;
-				set_cpu_freq(wifi5g.cpu_freq[level]);
 			}
 		}
 	}
-
 }
 
-
 static void cooling_init() {
-	char filename[PATH_MAX];
-	int i,result=0;
+	char filename[256];
+	int i;
 
 	for (i=0 ; i <= 1; i++) {
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
 		write_cur_state(filename, 0);
 	}
-
-	if(load_config_file)
-		result = load_config();
-
-	if (result == 1 || load_config_file == 0)
-		load_default_config();
 }
 
 void print_usage(void)
 {
 	printf("\nWifi-cooling daemon usage\n");
 	printf("Optional arguments:\n");
-	printf("  -c <file>        setting with config file\n");
-	printf("  -d               default setting\n");
+	printf("  -c <file>        config file\n");
+	printf("  -d               debug output\n");
 	printf("  -h               this usage screen\n");
 }
 
@@ -312,18 +185,17 @@ int main(int argc, char *argv[])
 	setpriority(PRIO_PROCESS, getpid(), -20);
 
 	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "cooling");
-	ulog_threshold(LOG_ERR);
-//	ulog_threshold(LOG_INFO);
+	ulog_threshold(LOG_INFO);
 
- 	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
+	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
 		switch (ch) {
 		case 'c':
 			printf("wifi-cooling load configuration file %s\n", optarg);
 			config_file = optarg;
-			load_config_file=1;
 			break;
 		case 'd':
-			printf("wifi-cooling set to default value\n");
+			printf("wifi-cooling ulog_threshold set to debug level\n");
+			ulog_threshold(LOG_DEBUG);
 			break;
 		case 'h':
 		default:
@@ -340,4 +212,4 @@ int main(int argc, char *argv[])
 	uloop_done();
 
 	return 0;
-}
+}

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630c-311g-cooling.conf

@@ -1,11 +1,15 @@
-[wifi2g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           35          50          70
-CPU_freq            1008000     800000      800000      800000
+sampling 5000
 
-[wifi5g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          30          50
-CPU_freq            1008000     800000      800000      800000
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr 		0			100			105			110			115
+actions 			cooling		cooling	 	cooling		cooling		shutdown
+action_info 		0			35	 		50			70			800000
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr 		0			100			105			110			115
+actions 			cooling		cooling		cooling		cooling		shutdown
+action_info 		0			20			30	 		50			800000

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630w-311g-cooling.conf

@@ -1,11 +1,15 @@
-[wifi2g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          50          70
-CPU_freq            1008000     800000      800000      800000
+sampling 5000
 
-[wifi5g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          50          70
-CPU_freq            1008000     800000      800000      800000
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			115			119			125
+thresholds_clr 		0			105			110			120
+actions 			cooling		cooling	 	cooling		cooling
+action_info 		0			20	 		50			70
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds 			105			115			119			125
+thresholds_clr 		0			105			110			120
+actions 			cooling		cooling		cooling		cooling
+action_info 		0			20			50	 		70

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -117,6 +117,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -160,7 +162,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -259,6 +261,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -468,9 +472,6 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,8 +725,7 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp multi_psk \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request
+		vendor_elements fils uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -780,8 +780,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
+			ssid.mpsk = config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
+	if (!is_ssid_mpsk(data.iface))
+		return;
+
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
-		if (!is_ssid_mpsk(data.iface))
-			return;
-
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
+		if (data.psk_idx == null)
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/ipq807x_v5.4/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1944,21 +1944,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -33,11 +33,6 @@ sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
         ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
-sonicfi,rap630e)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
-	ucidef_set_led_default "power" "POWER" "green:power" "on"
-	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\
@@ -45,11 +40,6 @@ edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
         ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
-emplus,wap385c)
-	ucidef_set_led_default "ledr" "LEDR" "sys:red" "on"
-	ucidef_set_led_default "ledg" "LEDG" "sys:green" "on"
-	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
-	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,7 +48,6 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
 		ucidef_set_interface_wan "eth0"
@@ -68,12 +67,6 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
-	sonicfi,rap630e)
-		ucidef_set_interface_wan "eth1"
-		ucidef_set_interface_lan "eth0"
-	emplus,wap581)
-		ucidef_set_interface_wan "eth0 eth1"
-		;;
 	esac
 }
 
@@ -110,16 +103,6 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 2)
 		;;
-	sonicfi,rap630e)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		lan_mac=$(macaddr_canonicalize $mac)
-		wan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth1 $wan_mac
-		ucidef_set_network_device_mac eth0 $lan_mac
-		ip link set eth1 address $wan_mac
-		ip link set eth0 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -94,15 +94,6 @@ ath11k_generate_macs_gl_b3000() {
 	}
 }
 
-ath11k_generate_macs_rap630e() {
-	touch /lib/firmware/ath11k-macs
-	eth=$(cat /sys/class/net/eth0/address)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -131,7 +122,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -139,7 +129,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
-	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -150,7 +139,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
-	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -163,19 +151,16 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
-	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
-	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -191,7 +176,6 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 		;;
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	glinet,b3000)
@@ -227,9 +211,6 @@ ath11k-macs)
 	cybertan,eww631-b1)
 		ath11k_generate_macs_eww631_b1
 		;;
-	sonicfi,rap630e)
-		ath11k_generate_macs_rap630e
-		;;
 	edgecore,eap104|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -73,11 +73,9 @@ platform_check_image() {
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
-	emplus,wap385c|\
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
@@ -92,7 +90,6 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
-	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -132,7 +129,6 @@ platform_do_upgrade() {
                 ;;
 	cig,wf186w|\
 	cig,wf186h|\
-	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	wallys,dr5018|\
@@ -140,7 +136,6 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
-	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
@@ -152,8 +147,7 @@ platform_do_upgrade() {
 	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630w-312g|\
-	sonicfi,rap630e)
+	sonicfi,rap630w-312g)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
 			echo "Current bootfrom is $boot_part"
 			if [[ $boot_part == 1 ]]; then

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -450,8 +450,6 @@ CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_SAMA5D2_PIOBU is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_USB_DETECT is not set
-CONFIG_GPIO_WATCHDOG=y
-CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 # CONFIG_GSI is not set
 # CONFIG_HABANA_AI is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap385c.dts

@@ -1,760 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP385C";
-	compatible = "emplus,wap385c", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet1 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 23 0>;
-
-			ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x18>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	poe_dc_pins: poe_dc_pins {
-		T2P_DET {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		12V_DET {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pinmux {
-		linux,phandle = <0x4d>;
-		phandle = <0x4d>;
-
-		led_G {
-			pins = "gpio24";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-
-		led_B {
-			pins = "gpio28";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-
-		led_R {
-			pins = "gpio38";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@24 {
-			label = "sys:green";
-			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led@28 {
-			label = "sys:blue";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led_power: led@38 {
-			label = "sys:red";
-			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap385c:sys:red";
-			default-state = "on";
-		};
-	};
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-			"gcc_wcss_acmt_clk",
-			"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts

@@ -1,831 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP581";
-	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-
-			ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <&tlmm 0x27 0>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x3e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-					port@4 {
-						port_id = <5>;
-						phy_address = <4>;
-					};
-				};
-			};
-		};
-
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-				led@28 {
-					label = "led_blue";
-					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-
-				led@38 {
-					label = "led_red";
-					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-
-				led@46 {
-					label = "led_green";
-					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-		};
-
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};		
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio28";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_red { /* POWER_LED */
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_green { /* 2G_LED */
-			pins = "gpio46";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-			"gcc_wcss_acmt_clk",
-			"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,rproc = <&q6_wcss_pd1>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x23>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x50>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-&pcie_x2 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-	status = "disabled";	
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts

@@ -1,893 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Sonicfi RAP630E";
-	compatible = "sonicfi,rap630e", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E200000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4EF00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D300000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D500000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E400000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E900000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4F800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4E900000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
-			no-map;
-			reg = <0x0 0x4F600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
-			no-map;
-			reg = <0x0 0x4F700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
-			no-map;
-			reg = <0x0 0x4F800000 0x0 0x500000>;
-		};
-		ramoops: ramoops@50400000 {
-			compatible = "ramoops";
-			reg = <0x0 0x50400000 0x0 0x80000>; // 512KB
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-			no-map;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		pcm: pcm@0xA3C0000{
-			pinctrl-0 = <&audio_pins>;
-			pinctrl-names = "default";
-		};
-
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio22", "gpio24", "gpio23", "gpio25";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	audio_pins: audio_pinmux {
-	};
-
-	leds_pins: leds_pins {
-			led_5g {
-					pins = "gpio34";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_2g {
-					pins = "gpio33";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_sys {
-					pins = "gpio26";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_onekey {
-					pins = "gpio28";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-			};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-	leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led34 {
-				label = "green:wifi5";
-				gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led33 {
-				label = "green:wifi2";
-				gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led_power: led26 {
-				label = "green:power";
-				gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led@28 {
-				label = "led_onekey";
-				gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "led_onekey";
-				default-state = "off";
-			};
-		};
-
-		gpio-watchdog {
-			compatible = "linux,wdt-gpio";
-            gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
-			hw_algo = "toggle";
-			hw_margin_ms = <5000>;
-			start-at-boot;
-			always-running;
-			status = "okay";
-		};
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	nss-radio-priority = <0>;
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	nss-radio-priority = <1>;
-	status = "ok";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-	nss-radio-priority = <1>;
-#endif
-	mem-region = <&q6_qcn6122_data2>;
-	qcom,caldb-size = <0x500000>;
-	status = "disabled";
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "disabled";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -73,17 +73,6 @@ define Device/sonicfi_rap630w_311g
 endef
 TARGET_DEVICES += sonicfi_rap630w_311g
 
-define Device/sonicfi_rap630e
-  DEVICE_TITLE := Sonicfi RAP630E
-  DEVICE_DTS := qcom-ipq5018-rap630e
-  SUPPORTED_DEVICES := sonicfi,rap630e
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630e ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap630e
-
 define Device/edgecore_eap104
   DEVICE_TITLE := EdgeCore EAP104
   DEVICE_DTS := qcom-ipq5018-eap104
@@ -165,15 +154,6 @@ define Device/edgecore_oap101e_6e
 endef
 TARGET_DEVICES += edgecore_oap101e_6e
 
-define Device/emplus_wap385c
-  DEVICE_TITLE := Emplus WAP385C
-  DEVICE_DTS := qcom-ipq5018-emplus-wap385c
-  SUPPORTED_DEVICES := emplus,wap385c
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap385c ath11k-firmware-ipq50xx-map-spruce
-  DEVICE_DTS_CONFIG := config@mp03.3
-endef
-TARGET_DEVICES += emplus_wap385c
-
 define Device/hfcl_ion4x_w
   DEVICE_TITLE := HFCL ION4x_w
   DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w
@@ -239,16 +219,3 @@ define Device/glinet_b3000
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
-
-define Device/emplus_wap581
-  DEVICE_TITLE := Emplus WAP581
-  DEVICE_DTS := qcom-ipq5018-emplus-wap581
-  SUPPORTED_DEVICES := emplus,wap581
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
-  DEVICE_DTS_CONFIG := config@mp03.3
-  IMAGES := sysupgrade.tar nand-factory.bin
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
-endef
-TARGET_DEVICES += emplus_wap581
-

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -26,12 +26,6 @@ edgecore,eap101)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
-emplus,wap386v2)
-	ucidef_set_led_default "power" "POWER" "red:power" "on"
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
-	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-	cig,wf660a|\
-	emplus,wap386v2)
+       cig,wf660a)
 		ucidef_set_interface_wan "eth0"		
 		;;
+
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -76,9 +76,6 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
-	emplus,wap386v2)
-		wan_mac=$(cat /sys/class/net/eth0/address)
-		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -76,7 +76,6 @@ case "$FIRMWARE" in
 	cig,wf188n|\
 	cig,wf660a|\
 	edgecore,eap101|\
-	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -110,8 +109,7 @@ ath11k-macs)
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	cig,wf188n|\
-	emplus,wap386v2)
+	cig,wf188n)
 		ath11k_generate_macs
 		;;
 	cig,wf660a)

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -122,7 +122,6 @@ platform_check_image() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
-	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -146,8 +145,7 @@ platform_do_upgrade() {
 	cig,wf660a)
 		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
-	cig,wf188n|\
-	emplus,wap386v2)
+	cig,wf188n)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
 			CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts

@@ -1,356 +0,0 @@
-/*
- * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "ipq6018.dtsi"
-#include "ipq6018-cpr-regulator.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Emplus WAP386 v2";
-	compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
-
-	aliases {
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	gpio-reserved-ranges = <20 1>;
-
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio9";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <3>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <4>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x08>; /* lan port bitmap */
-		switch_wan_bmp = <0x10>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@0 {
-				port_id = <2>;
-				phy_address = <3>;
-			};
-			port@1 {
-				port_id = <3>;
-				phy_address = <4>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <4>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@9 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_power: led@28 {
-			label = "red:power";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:red:power";
-			default-state = "on";
-		};
-		led@29 {
-			label = "blue:wan";
-			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:eth";
-			default-state = "on";
-		};
-		led@30 {
-			label = "blue:wifi2";
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:2g";
-			default-state = "on";
-		};
-		led@31 {
-			label = "blue:wifi5";
-			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:5g";
-			default-state = "on";
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x30>;
-};
-
-&pcie_phy {
-	status = "ok";
-};
-
-&pcie0 {
-#if defined(__CNSS2__)
-	status = "ok";
-#endif
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&qpic_nand {
-	status = "ok";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&CPU0 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU1 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU2 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU3 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&rpm_glink {
-	status = "disabled";
-};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -76,15 +76,6 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
-define Device/emplus_wap386v2
-  DEVICE_TITLE := Emplus WAP386v2
-  DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := emplus,wap386v2
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
-endef
-TARGET_DEVICES += emplus_wap386v2
-
 define Device/indio_um-310ax-v1
   DEVICE_TITLE := Indio UM-310AX V1
   DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -20,12 +20,6 @@ edgecore,oap103)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
-emplus,wap380c)
-	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
-	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
-	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
-	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
-	;;
 sonicfi,rap630w-311g|\
 sonicfi,rap650c|\
 cybertan,eww631-b1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -12,7 +12,6 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"
 
 	case $board in
-	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,14 +16,14 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_rap650c() {
+ath11k_generate_macs_sonicfi() {
 	mac=$(fw_printenv -n BaseMacAddress)
 	[ -z "$mac" ] && return;
 
 	touch /lib/firmware/ath11k-macs
 	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 3)
-	mac2=$(macaddr_add $eth 2)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
 	mac3=$(macaddr_add $eth 4)
 	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
 	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
@@ -72,7 +72,6 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
-	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
@@ -113,8 +112,8 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi,rap650c)
-		ath11k_generate_macs_rap650c
+	sonicfi*)
+		ath11k_generate_macs_sonicfi
 		;;
 	esac
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,7 +29,6 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
-	emplus,wap380c|\
 	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
@@ -49,8 +48,7 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-	cig,wf196|\
-	emplus,wap380c)
+        cig,wf196)
                 [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                         CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                         CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts

@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP380C";
-	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
-	qcom,msm-id = <0x143 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp6";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		qti: ledc@191E000  {
-			compatible = "qti,ledc";
-			reg = <0x191E000 0x20070>;
-			reg-names = "ledc_base_addr";
-			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
-									0x00000000 0x00000000 \
-									0x00000000 0xFFFFFFFF \
-									0xFFFF7FFF 0xFFFFFFFF \
-									0x007D0820 0x00000000 \
-									0x10482094 0x03FFFFE1>;
-			qti,ledc_blink_indices_cnt = <6>;
-			qti,ledc_blink_indices = <15 14 13 12 11 10>;
-			qti,ledc_blink_idx_src_pair = <5 20>;
-			status = "ok";
-		};
-
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio52";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			ledc_pins: ledc_pinmux {
-				led_clk {
-					pins = "gpio18";
-					function = "led0";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				led_data {
-					pins = "gpio19";
-					function = "led1";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				led_clr {
-					pins = "gpio20";
-					function = "led2";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <4>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <4>;
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		dp6 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&apc_cpr {
-	/* Same CPR configuration as OAK */
-	compatible = "qcom,cpr4-ipq817x-apss-regulator";
-
-	thread@0 {
-		apc_vreg: regulator {
-			regulator-min-microvolt = <1>;
-			regulator-max-microvolt = <2>;
-			qcom,cpr-fuse-corners = <2>;
-			qcom,cpr-corners = <3>;
-			qcom,cpr-speed-bin-corners = <3>;
-			qcom,cpr-corner-fmax-map = <1 3>;
-
-			qcom,cpr-voltage-ceiling =
-				<840000 904000 944000>;
-			qcom,cpr-voltage-floor =
-				<592000 648000 712000>;
-			qcom,corner-frequencies =
-				<1017600000 1382400000 1382400000>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				< 20000  26000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0   7000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-floor-to-ceiling-max-range =
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>;
-		};
-	};
-};
-
-&npu_cpr {
-	status = "disabled";
-};
-
-&nss0 {
-	qcom,low-frequency = <187200000>;
-	qcom,mid-frequency = <748800000>;
-	qcom,max-frequency = <1497600000>;
-};
-
-&nss0 {
-	npu-supply = <&dummy_reg>;
-	mx-supply = <&dummy_reg>;
-};
-
-&wifi0 {
-	qcom,board_id = <0x92>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};
-
-&ledc {
-	pinctrl-0 = <&ledc_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-
-	led_power: led0 {
-		label = "ipq::led0";
-		linux,default-trigger = "default-on";
-	};
-
-	wan: led1 {
-		label = "ipq::led1";
-		linux,default-trigger = "netdev";
-	};
-
-	wifi2g: led2 {
-		label = "ipq::led2";
-		linux,default-trigger = "phy1tpt";
-	};
-
-	wifi5g: led3 {
-		label = "ipq::led3";
-		linux,default-trigger = "phy0tpt";
-	};
-
-	led4 {
-		label = "ipq::led4";
-		linux,default-trigger = "none";
-	};
-
-	led5 {
-		label = "ipq::led5";
-		linux,default-trigger = "none";
-	};
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,15 +57,6 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
-define Device/emplus_wap380c
-  DEVICE_TITLE := Emplus WAP380C
-  DEVICE_DTS := qcom-ipq807x-wap380c
-  DEVICE_DTS_CONFIG=config@hk07
-  SUPPORTED_DEVICES := emplus,wap380c
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
-endef
-TARGET_DEVICES += emplus_wap380c
-
 define Device/sonicfi_rap650c
   DEVICE_TITLE := SonicFi RAP650C
   DEVICE_DTS := qcom-ipq807x-rap650c

feeds/ipq807x_v5.4/mac80211/patches/pending/999-remove-kernel-warn-msg-abnormal-he-nss-value.patch

@@ -6,7 +6,7 @@
  		return 0;
 -	if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8))
 +	if (rate->nss < 1 || rate->nss > 8) {
-+		printk_once(KERN_WARNING "cfg80211_calculate_bitrate_he: invalid rate->nss: %d\n", rate->nss);
++		printk_once(1, "invalid rate->nss: %d\n", rate->nss);
  		return 0;
 -
 +	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-003-fix-roaming-firmware-crash.patch

@@ -1,119 +0,0 @@
---- a/drivers/net/wireless/ath/ath11k/peer.c
-+++ b/drivers/net/wireless/ath/ath11k/peer.c
-@@ -819,10 +819,7 @@ int ath11k_peer_delete(struct ath11k *ar
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
- 		mutex_unlock(&ar->ab->base_ast_lock);
- #endif
--		ath11k_warn(ar->ab,
--			    "failed to find peer vdev_id %d addr %pM in delete\n",
--			    vdev_id, addr);
--		return -EINVAL;
-+		return 0;
-         }
- 
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
-@@ -883,6 +880,7 @@ int ath11k_peer_create(struct ath11k *ar
- 	struct ieee80211_vif *vif = arvif->vif;
- 	struct ath11k_sta *arsta;
- 	int ret, fbret;
-+	u8 vdev_id = 0;
- 
- 	lockdep_assert_held(&ar->conf_mutex);
- 
-@@ -891,20 +889,21 @@ int ath11k_peer_create(struct ath11k *ar
- 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
- 		return -ENOBUFS;
- 	}
-+
- 	mutex_lock(&ar->ab->tbl_mtx_lock);
- 	spin_lock_bh(&ar->ab->base_lock);
- 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
-+	if (peer)
-+		vdev_id = peer->vdev_id;
-+	spin_unlock_bh(&ar->ab->base_lock);
-+	mutex_unlock(&ar->ab->tbl_mtx_lock);
-+
- 	if (peer) {
--		if (peer->vdev_id == param->vdev_id) {
--			spin_unlock_bh(&ar->ab->base_lock);
--			mutex_unlock(&ar->ab->tbl_mtx_lock);
-+		if (vdev_id == param->vdev_id)
- 			return -EINVAL;
--		}
--		ath11k_peer_rhash_delete(ar->ab, peer);
--	}
- 
--	spin_unlock_bh(&ar->ab->base_lock);
--	mutex_unlock(&ar->ab->tbl_mtx_lock);
-+		ath11k_peer_delete(ar, vdev_id, param->peer_addr);
-+	}
- 
- 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
- 	if (ret) {
---- a/drivers/net/wireless/ath/ath11k/dp.c
-+++ b/drivers/net/wireless/ath/ath11k/dp.c
-@@ -28,7 +28,7 @@ void ath11k_dp_peer_cleanup(struct ath11
- 	spin_lock_bh(&ab->base_lock);
- 	peer = ath11k_peer_find(ab, vdev_id, addr);
- 	if (!peer) {
--		ath11k_warn(ab, "failed to lookup peer %pM on vdev %d\n",
-+		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to lookup peer %pM on vdev %d\n",
- 			    addr, vdev_id);
- 		spin_unlock_bh(&ab->base_lock);
- 		return;
---- a/drivers/net/wireless/ath/ath11k/dp_rx.c
-+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
-@@ -1204,9 +1204,9 @@ int ath11k_dp_rx_ampdu_stop(struct ath11
- 
- 	peer = ath11k_peer_find(ab, vdev_id, params->sta->addr);
- 	if (!peer) {
--		ath11k_warn(ab, "failed to find the peer to stop rx aggregation\n");
-+		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to find the peer to stop rx aggregation\n");
- 		spin_unlock_bh(&ab->base_lock);
--		return -ENOENT;
-+		return 0;
- 	}
- 
- 	paddr = peer->rx_tid[params->tid].paddr;
---- a/drivers/net/wireless/ath/ath11k/mac.c
-+++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -4075,7 +4075,7 @@ static int ath11k_clear_peer_keys(struct
- 	peer = ath11k_peer_find(ab, arvif->vdev_id, addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ab->base_lock);
--		return -ENOENT;
-+		return 0;
- 	}
- 	for (i = 0; i < ARRAY_SIZE(keys); i++) {
- 		keys[i]= peer->keys[i];
-@@ -4325,6 +4325,10 @@ static int ath11k_mac_op_set_key(struct
- 
- 	spin_lock_bh(&ab->base_lock);
- 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
-+	if (!peer && cmd == DISABLE_KEY) {
-+		ret = 0;
-+		goto unlock;
-+	}
- 
- 	/* TODO: Check if vdev specific security cfg is mandatory */
- 	ret = ath11k_nss_vdev_set_cmd(arvif, ATH11K_NSS_WIFI_VDEV_SECURITY_TYPE_CMD, key->cipher);
-@@ -5961,7 +5965,7 @@ static void ath11k_mac_op_sta_rc_update(
- 	peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ar->ab->base_lock);
--		ath11k_warn(ar->ab, "mac sta rc update failed to find peer %pM on vdev %i\n",
-+		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac sta rc update failed to find peer %pM on vdev %i\n",
- 			    sta->addr, arvif->vdev_id);
- 		return;
- 	}
---- a/drivers/net/wireless/ath/ath11k/wmi.c
-+++ b/drivers/net/wireless/ath/ath11k/wmi.c
-@@ -8425,7 +8425,7 @@ static void ath11k_peer_sta_kickout_even
- 	peer = ath11k_peer_find_by_addr(ab, arg.mac_addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ab->base_lock);
--		ath11k_warn(ab, "peer not found %pM\n",
-+		ath11k_dbg(ab, ATH11K_DBG_WMI, "peer not found %pM\n",
- 			    arg.mac_addr);
- 		goto exit;
- 	}

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/init.d/bootcount

@@ -8,9 +8,6 @@ boot() {
 	edgecore,eap112)
 		bootcount=$(fw_printenv -n bootcount)
 		[ "$bootcount" != 0 ] && fw_setenv bootcount 0
-		# enable dualboot
-		avail=$(fw_printenv -n upgrade_available)
-		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -1,6 +1,6 @@
 REQUIRE_IMAGE_METADATA=1
 
-swap_wap588m_active_fw() {
+senao_swap_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
         tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
 	if [ $tmp_active_fw == "0" ]; then
@@ -12,18 +12,6 @@ swap_wap588m_active_fw() {
 	fi
 }
 
-senao_swap_active_fw() {
-	echo "Doing swap active_fw" > /dev/console
-	tmp_active_fw=$(fw_printenv -n active_fw)
-	if [ $tmp_active_fw == "0" ]; then
-		fw_setenv active_fw 1
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi_1\),112640k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
-	else
-		fw_setenv active_fw 0
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi\),112640k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
-	fi
-}
-
 platform_do_upgrade() {
 	local board=$(board_name)
 
@@ -106,8 +94,5 @@ platform_post_upgrade_success() {
 		senao,jeap6500)
 			senao_swap_active_fw
 		;;
-		emplus,wap588m)
-			swap_wap588m_active_fw
-		;;
 	esac
 }

feeds/mediatek-sdk/mt76/Makefile

@@ -493,22 +493,10 @@ define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR)/tools
 endef
 
-
 define Build/Install
 	:
 endef
 
-ifdef CONFIG_TARGET_PROFILE
-TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
-PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-endif
-
-define Build/Patch
-	$(Build/Patch/Default)
-	$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_PROFILE_NAME)/,profile/)
-endef
-
-
 define Package/kmod-mt76/install
 	true
 endef

feeds/mediatek-sdk/mt76/patches-emplus_wap588m/3000-wifi-mt76-mt7915-emplus-wap588m-thermal-protech.patch

@@ -1,26 +0,0 @@
-Index: mt76-2024-04-03-1e336a85/mt7915/mt7915.h
-===================================================================
---- mt76-2024-04-03-1e336a85.orig/mt7915/mt7915.h
-+++ mt76-2024-04-03-1e336a85/mt7915/mt7915.h
-@@ -71,8 +71,8 @@
- #define MT7915_CFEND_RATE_DEFAULT	0x49	/* OFDM 24M */
- #define MT7915_CFEND_RATE_11B		0x03	/* 11B LP, 11M */
- 
--#define MT7915_THERMAL_THROTTLE_MAX	100
--#define MT7915_CDEV_THROTTLE_MAX	99
-+#define MT7915_THERMAL_THROTTLE_MAX	80
-+#define MT7915_CDEV_THROTTLE_MAX	79
- 
- #define MT7915_SKU_RATE_NUM		161
- #define MT7915_SKU_PATH_NUM		185
-@@ -86,8 +86,8 @@
- 
- #define MT7915_CRIT_TEMP_IDX		0
- #define MT7915_MAX_TEMP_IDX		1
--#define MT7915_CRIT_TEMP		110
--#define MT7915_MAX_TEMP			120
-+#define MT7915_CRIT_TEMP		103
-+#define MT7915_MAX_TEMP			118
- 
- struct mt7915_vif;
- struct mt7915_sta;

feeds/morse/netifd-morse/lib/netifd/wireless/morse.sh

@@ -832,13 +832,6 @@ morse_hostapd_add_bss(){
 	morse_override_hostapd_set_bss_options hostapd_cfg "$_phy" "$vif" || return 1
 	json_get_vars wds wds_bridge sae_pwe dtim_period max_listen_int start_disabled
 
-	local network_config network_values
-	json_get_values network_values network
-	network_config=$(echo "$network_values" | cut -d' ' -f1)
-
-	if [ "$wds" -gt 0 ] && [ -z "$wds_bridge" ]; then
-		wds_bridge="${network_config%%[0-9]*}"
-	fi
 
 	raw_block=
 	json_for_each_item morse_hostapd_add_raw raws

feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=cig-device-boot
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/cig-device-boot
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+kmod-usb-serial-xr
-  TITLE:=CIG device init
-endef
-
-define Package/cig-device-boot/description
-  Initialize particular functions of the CIG device
-endef
-
-define Build/Compile
-
-endef
-
-define Package/cig-device-boot/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/cig-device.init $(1)/etc/init.d/cig-device-boot
-endef
-
-$(eval $(call BuildPackage,cig-device-boot))

feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init

@@ -1,7 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot(){
-    [ -e /dev/ttyUSB0 ] && stty -F /dev/ttyUSB0 115200 cs8 -cstopb -parenb -icrnl -onlcr
-}

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/Makefile

@@ -1,25 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=cig-poe-judgment
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/cig-poe-judgment
-  SUBMENU:=Other modules
-  TITLE:=CIG POE judgment
-  FILES:=$(PKG_BUILD_DIR)/cig_poe_judgment.ko
-  AUTOLOAD:=$(call AutoLoad,99,cig_poe_judgment)
-endef
-
-define KernelPackage/cig-poe-judgment/description
-  Find POE type
-endef
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
-endef
-
-$(eval $(call KernelPackage,cig-poe-judgment))

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/Makefile

@@ -1 +0,0 @@
-obj-m += cig_poe_judgment.o

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/cig_poe_judgment.c

@@ -1,252 +0,0 @@
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/proc_fs.h>
-#include <linux/kthread.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqreturn.h>
-#include <linux/of_gpio.h>
-#include <linux/err.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/uaccess.h>
-
-#define GPIO_MAX 		8 
-#define INT_MODE_MASK 		0xf0
-#define DETECT_MODE1	 	0x3
-#define DETECT_MODE2	 	0x4
-
-enum POE_TYPE {
-	POE_TYPE_AT = 1,
-	POE_TYPE_AF,
-	POE_TYPE_BT,
-	POE_TYPE_DC,
-	POE_TYPE_MAX
-};
-
-struct poe_irq_data
-{
-	struct device *dev;
-	int irq;
-	struct tasklet_struct tasklet;
-	int poe_type;
-};
-
-static void  *poe_gpio_base;
-static void  *pse_gpio_base;
-struct poe_irq_data *data = NULL;
-u32 mode;
-
-static const struct of_device_id my_of_ids[] = {
-	{.compatible = "poe-judge"},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of,my_of_ids);
-
-static int poe_info_proc_show(struct seq_file *m, void *v)
-{
-	const char *type_str = "invalid";
-
-	switch (data->poe_type) {
-		case POE_TYPE_AT: 
-			type_str = "AT"; 
-			break;
-		case POE_TYPE_AF: 
-			type_str = "AF"; 
-			break;
-		case POE_TYPE_BT: 
-			type_str = "BT"; 
-			break;
-		case POE_TYPE_DC: 
-			type_str = "DC"; 
-			break;
-	}
-
-	seq_printf(m, "%s\n", type_str);
-
-	return 0;
-}
-
-static void poe_tasklet_func(unsigned long data)
-{
-	struct poe_irq_data *irq_data = (struct poe_irq_data *)data;
-
-	writel(0x3, pse_gpio_base+4);
-	irq_data->poe_type = POE_TYPE_BT;
-
-	return;
-}
-
-static irqreturn_t gpio_key1_irq_handler(int irq, void *dev_id)
-{
-	struct poe_irq_data *data = (struct poe_irq_data *)dev_id;
-
-	disable_irq_nosync(data->irq);
-	tasklet_schedule(&data->tasklet);
-
-	return IRQ_HANDLED;
-}
-
-static int poe_info_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, poe_info_proc_show, NULL);
-}
-
-static const struct proc_ops poe_info_proc_fops = {
-	.proc_open = poe_info_proc_open,
-	.proc_read = seq_read,
-	.proc_lseek = seq_lseek,
-	.proc_release = single_release,
-};
-
-static int gpio_key_probe(struct platform_device *dev)
-{
-	int ret = 0;
-	int irq = (-1);
-	int val = 0;
-	int gpio_id = 0;
-	int gpio[GPIO_MAX] = {0}, gpio_val[GPIO_MAX] = {0};
-	int num;
-	char name[16];
-	struct device_node *np = dev->dev.of_node;
-
-	if (of_property_read_u32(np, "detect-mode", &mode)) {
-		pr_err("Failed to read detect mode\n");
-		return -EINVAL;
-	}
-
-	data = devm_kzalloc(&dev->dev, sizeof(struct poe_irq_data), GFP_KERNEL);
-	if (!data)
-	{
-		return -ENOMEM;
-	}
-
-	if (mode & INT_MODE_MASK) {
-		poe_gpio_base = ioremap(0x1017004, 8);
-		pse_gpio_base = ioremap(0x1026000, 8);
-
-		writel(0x2c1, pse_gpio_base);
-		writel(0x0, pse_gpio_base+4);
-
-
-		data->dev = &dev->dev;
-		dev_set_drvdata(&dev->dev, data);
-
-		gpio_id = of_get_named_gpio(dev->dev.of_node, "detect_gpio", 0);
-		if (gpio_id < 0)
-		{
-			return -EINVAL;
-		}
-
-		tasklet_init(&data->tasklet, poe_tasklet_func, (unsigned long)data);
-
-		ret = devm_gpio_request_one(&dev->dev, gpio_id, GPIOF_IN, "poe_judge");
-		if(ret)
-		{
-			pr_err("GPIO23 request failed, ret:%d\n", ret);
-			return ret;
-		}
-
-		val = readl(poe_gpio_base);
-		if(val == 1)
-		{
-			pr_info("poe type is af or bt,close pse first\n");
-			data->poe_type = POE_TYPE_AF;
-		}
-		else
-		{
-			data->poe_type = POE_TYPE_AT;
-		}
-
-		irq = gpio_to_irq(gpio_id);
-		data->irq = irq;
-
-		ret = devm_request_any_context_irq(&dev->dev, data->irq, 
-				gpio_key1_irq_handler, 
-				IRQF_TRIGGER_FALLING, 
-				"poe_judge", data);
-		if (ret)
-		{
-			pr_err("Request irq fail %d\n", ret);
-			return ret;
-		}
-	} else {
-		if (mode == DETECT_MODE1 || mode == DETECT_MODE2) {
-			num = 3;
-		} else {
-			pr_err("Wrong poe detect mode\n");
-			return -ENOMEM;
-		}
-
-		for (int i = 0; i < num; i++) {
-			sprintf(name, "detect-gpio%d", i+1);
-			gpio[i] = of_get_named_gpio(np, name, 0); 	
-			ret = gpio_request(gpio[i], name);
-			if (ret) {
-				pr_err("Can not request gpio %d\n", i+1);
-				return ret;
-			}
-			gpio_direction_input(gpio[i]);
-			gpio_val[i] = gpio_get_value_cansleep(gpio[i]);
-		}
-		
-		if (mode == DETECT_MODE1){
-			if (gpio_val[0] > 0) {
-				data->poe_type = POE_TYPE_DC;
-			} else if (gpio_val[1] > 0){
-				if (gpio_val[2] == 0) {
-					data->poe_type = POE_TYPE_AT;
-				} else {
-					data->poe_type = POE_TYPE_AF;
-				}
-			}
-		}else if (mode == DETECT_MODE2){
-			switch (gpio_val[0] | (gpio_val[1] << 1) | (gpio_val[2] << 2)) {
-				case 3:
-					data->poe_type = POE_TYPE_AT;
-					break;
-				case 4:
-					data->poe_type = POE_TYPE_BT;
-					break;
-				case 7:
-					data->poe_type = POE_TYPE_AF;
-					break;
-			}
-		}
-
-	}
-
-	if (!proc_create("poe_info", 0444, NULL, &poe_info_proc_fops)) {
-		pr_err("Failed to create proc entry for poe_info\n");
-		return -ENOMEM;
-	}
-
-	return ret;
-}
-
-static int gpio_key_remove(struct platform_device *dev)
-{
-	remove_proc_entry("poe_info", NULL);
-
-	return 0;
-}
-
-static struct platform_driver poe_judge_driver =
-{
-	.driver = {
-		.name = "poe_judge",
-		.of_match_table = my_of_ids,
-		.owner = THIS_MODULE,
-	},
-	.probe = gpio_key_probe,
-	.remove = gpio_key_remove,
-};
-
-module_platform_driver(poe_judge_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Poe type judgment driver");
-MODULE_AUTHOR("huangyunxiang<huangyunxiang@cigtech.com>");

feeds/qca-wifi-7/cig-wifi-mode-sw/files/cig_wifi_mode_sw

@@ -3,9 +3,9 @@
 band=$1
 if [ $band -eq 2 ] || [ $band -eq 3 ]; then
 	echo $band > /proc/rf_switch
-	echo "firstboot for switch wifi mode 2/3 bands"
+	echo "reboot for switch wifi mode 2/3 bands"
 	sleep 1
-	firstboot -y -r
+	reboot
 else
 	echo "error band param"
 fi

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -121,6 +121,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
@@ -145,7 +147,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
 		maxassoc_ignore_probe band
 
@@ -242,6 +244,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -423,9 +427,6 @@ hostapd_common_add_bss_config() {
 
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -679,8 +680,7 @@ hostapd_set_bss_options() {
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request
+		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -737,8 +737,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
@@ -777,16 +775,11 @@ hostapd_set_bss_options() {
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
-		psk-sae|eap-eap2)
+		psk-sae|psk2-radius|eap-eap2)
 			set_default ieee80211w 1
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
-                psk2-radius)
-			set_default ieee80211w 1
-			set_default sae_require_mfp 0
-			[ "$ppsk" -eq 0 ] && set_default sae_pwe 4
-                ;;
 	esac
 	[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
 	[ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N"

feeds/qca-wifi-7/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
+			ssid.mpsk = config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
+	if (!is_ssid_mpsk(data.iface))
+		return;
+
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
-		if (!is_ssid_mpsk(data.iface))
-			return;
-
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
+		if (data.psk_idx == null)
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/qca-wifi-7/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/qca-wifi-7/hostapd/src/src/ap/ubus.c

@@ -1923,21 +1923,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/qca-wifi-7/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -19,6 +19,15 @@ sonicfi,rap750e-s|\
 sonicfi,rap750w-311a)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
+zyxel,nwa130be)
+	#eth0: APPE: phyaddr 4  green:2.5G  orange:others
+	ssdk_sh debug phy set 4 0x40078074 0x670
+	ssdk_sh debug phy set 4 0x40078078 0x8600
+
+	#eth1:  MHT: phyaddr 3  green:2.5G orange:others
+	ssdk_sh debug phy set 3 0x40078074 0x670
+	ssdk_sh debug phy set 3 0x40078078 0x8600
+	;;
 esac
 
 board_config_flush

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -20,7 +20,7 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	sonicfi,rap7110c-341x|\
-	sonicfi,rap750e-h|\
+	sonicfi,rap750e-h|\)
 	sonicfi,rap750e-s)
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
@@ -95,7 +95,7 @@ qcom_setup_macs()
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-                [ "$board" = "sonicfi,rap7110c-341x" ] &&
+                [ "$board" = "sonicfi,rap7110c-34x" ] &&
                     ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
                 ;;
         sonicfi,rap750w-311a)

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/phy_quirks

@@ -1,22 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	. /lib/functions.sh
-
-	case "$(board_name)" in
-	edgecore,eap105)
-		ssdk_sh debug phy set 0x1 0x601FD032 0xff
-		;;
-	zyxel,nwa130be)
-		#eth0: APPE: phyaddr 4  green:2.5G  orange:others
-		ssdk_sh debug phy set 4 0x40078074 0x670
-		ssdk_sh debug phy set 4 0x40078078 0x8600
-
-		#eth1:  MHT: phyaddr 3  green:2.5G orange:others
-		ssdk_sh debug phy set 3 0x40078074 0x670
-		ssdk_sh debug phy set 3 0x40078078 0x8600
-		;;
-	esac
-}

feeds/qca-wifi-7/ipq53xx/config-6.1

@@ -1223,6 +1223,3 @@ CONFIG_PSTORE=y
 CONFIG_PSTORE_CONSOLE=y
 CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_RAM=y
-# CONFIG_RTL8221D_PHY is not set
-# CONFIG_INPUT_LSM303AGR is not set
-# CONFIG_USB_SERIAL_XR is not set

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -236,15 +236,6 @@
 			};
 		};
 
-		poe {
-			compatible = "poe-judge";
-			detect-mode = <0x3>;
-			detect-gpio1 = <&tlmm 25 GPIO_ACTIVE_HIGH>;
-			detect-gpio2 = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-			detect-gpio3 = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			status = "ok";
-                };
-
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -298,13 +298,6 @@
 			};
 		};
 
-		poe {
-                        compatible = "poe-judge";
-			detect-mode = <0x11>;
-                        detect_gpio = <&tlmm 0x17 0>;
-                        status = "ok";
-                };
-
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -298,13 +298,6 @@
 			};
 		};
 
-		poe {
-                        compatible = "poe-judge";
-			detect-mode = <0x11>;
-                        detect_gpio = <&tlmm 0x17 0>;
-                        status = "ok";
-                };
-
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts

@@ -59,8 +59,6 @@
 			num_devices = <0x1>;
 
 			ess-switch@3a000000 {
-				pinctrl-0 = <&sfp_pins>;
-				pinctrl-names = "default";
 				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
@@ -236,15 +234,6 @@
 			};
 		};
 
-		poe {
-			compatible = "poe-judge";
-			detect-mode = <0x4>;
-			detect-gpio1 = <&extgpio 0 0>;
-			detect-gpio2 = <&extgpio 1 0>;
-			detect-gpio3 = <&extgpio 2 0>;
-			status = "ok";
-                };
-
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;
@@ -286,7 +275,7 @@
 
 &blsp1_i2c1 {
 	status = "okay";
-	clock-frequency  = <100000>;
+	clock-frequency  = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	extgpio:pca9555@20{
@@ -444,13 +433,6 @@
                 };
 	};
 
-	sfp_pins: sfp-state {
-		pins = "gpio43";
-		function = "gpio";
-		bias-pull-up;
-		input-enable;
-	};
-
 	spi_0_data_clk_pins: spi-0-data-clk-state {
 		pins = "gpio14", "gpio15", "gpio16";
 		function = "blsp0_spi";
@@ -556,6 +538,7 @@
 	pinctrl-0 = <&pwm_pins>;
 	pinctrl-names = "default";
 	dft-pwm-status = <0>, <0>, <1>, <0>;
+        poe_type_pin = <&extgpio 0 0 &extgpio 1 0 &extgpio 2 0>;
 	status = "okay";
 };
 

feeds/qca-wifi-7/iwinfo/files-iwinfo/usr/share/ucode/iwinfo.uc

@@ -397,7 +397,7 @@ export function info(name) {
 			mode: data.mode,
 			channel: format_channel(data.wiphy_freq),
 			freq: format_frequency(data.wiphy_freq),
-			htmode: data?.radio?.htmode,
+			htmode: data.radio.htmode,
 			center_freq1: format_channel(data.center_freq1) || 'unknown',
 			center_freq2: format_channel(data.center_freq2) || 'unknown',
 			txpower: data.wiphy_tx_power_level / 100,

feeds/qca-wifi-7/mac80211/patches-cig_wf189h/ath12k/993-CIG-add-thermal-and-antenna-control.patch

@@ -1,181 +0,0 @@
-diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
---- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
-+++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
-@@ -10451,6 +10451,30 @@
- 	return 0;
- }
- 
-+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
-+{
-+    int ret;
-+    
-+    if (!tx_ant || !rx_ant) {
-+        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
-+        return -EINVAL;
-+    }
-+
-+    /* return if it is no changed */
-+    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
-+        return 0;
-+
-+    mutex_lock(&ar->conf_mutex);
-+    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
-+    if (!ret) {
-+        ar->cfg_tx_chainmask = tx_ant;
-+        ar->cfg_rx_chainmask = rx_ant;
-+    }
-+    mutex_unlock(&ar->conf_mutex);
-+
-+    return ret;
-+}
-+
- static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
- {
- 	int num_mgmt = 0;
-diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
---- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
-+++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
-@@ -168,6 +168,7 @@
- 
- extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
- 
-+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
- void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
- void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
- void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
-diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
---- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
-+++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
-@@ -401,8 +401,25 @@
- 	complete(&ar->thermal.wmi_sync);
- }
- 
-+static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
-+    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
-+    struct ath12k *ar = thermal_work->ar;
-+    int ret;
-+
-+    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
-+    if (ret) {
-+        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
-+                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
-+    }
-+    kfree(thermal_work);
-+}
-+
- void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
- {
-+	int temp = ar->thermal.temperature;
-+    	u32 tx_mask, rx_mask;
-+    	bool need_switch = false;
-+
- 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
- 	    curr_level >= ENHANCED_THERMAL_LEVELS)
- 		return;
-@@ -416,7 +433,37 @@
- 	else
- 		ar->thermal.throttle_state =
- 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
--	spin_unlock_bh(&ar->data_lock);
-+	
-+	/* configure ant mode */
-+	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
-+        	tx_mask = 0x1;
-+        	rx_mask = 0x1;
-+        	need_switch = true;
-+    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
-+        	tx_mask = ar->thermal.default_tx_chainmask;
-+        	rx_mask = ar->thermal.default_rx_chainmask;
-+        	need_switch = true;
-+    	}
-+
-+    	spin_unlock_bh(&ar->data_lock);
-+
-+    /* set param async*/ 
-+    if (need_switch) {
-+        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
-+        if (work) {
-+            work->ar = ar;
-+            work->tx_mask = tx_mask;
-+            work->rx_mask = rx_mask;
-+            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
-+            schedule_work(&work->work);
-+            
-+            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
-+                       ar->pdev_idx, temp,
-+                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
-+                       (tx_mask > 0x1) ? "dual" : "single",
-+                       curr_level);
-+        }
-+    }
- }
- 
- static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
-@@ -459,6 +506,11 @@
- 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
- 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
- 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
-+
-+                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
-+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
-+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
-+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
- 		}
- 	} else {
- 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
-@@ -494,6 +546,10 @@
- 	for (i = 0; i < ab->num_radios; i++) {
- 		pdev = &ab->pdevs[i];
- 		ar = pdev->ar;
-+
-+		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
-+        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
-+
- 		if (!ar)
- 			continue;
- 
-diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
---- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
-+++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
-@@ -22,15 +22,15 @@
- #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
--#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
--#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
--#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
--#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
-+#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
- 
- #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
- #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
-@@ -83,6 +83,16 @@
- 	 * protected by data_lock
- 	 */
- 	int temperature;
-+
-+	u32 default_tx_chainmask;
-+    	u32 default_rx_chainmask;
-+};
-+
-+struct ath12k_thermal_work {
-+    struct work_struct work;
-+    struct ath12k *ar;
-+    u32 tx_mask;
-+    u32 rx_mask;
- };
- 
- #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION

feeds/qca-wifi-7/mac80211/patches-cig_wf189w/ath12k/993-CIG-add-thermal-and-antenna-control.patch

@@ -1,181 +0,0 @@
-diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
---- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
-+++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
-@@ -10451,6 +10451,30 @@
- 	return 0;
- }
- 
-+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
-+{
-+    int ret;
-+    
-+    if (!tx_ant || !rx_ant) {
-+        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
-+        return -EINVAL;
-+    }
-+
-+    /* return if it is no changed */
-+    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
-+        return 0;
-+
-+    mutex_lock(&ar->conf_mutex);
-+    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
-+    if (!ret) {
-+        ar->cfg_tx_chainmask = tx_ant;
-+        ar->cfg_rx_chainmask = rx_ant;
-+    }
-+    mutex_unlock(&ar->conf_mutex);
-+
-+    return ret;
-+}
-+
- static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
- {
- 	int num_mgmt = 0;
-diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
---- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
-+++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
-@@ -168,6 +168,7 @@
- 
- extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
- 
-+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
- void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
- void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
- void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
-diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
---- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
-+++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
-@@ -401,8 +401,25 @@
- 	complete(&ar->thermal.wmi_sync);
- }
- 
-+static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
-+    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
-+    struct ath12k *ar = thermal_work->ar;
-+    int ret;
-+
-+    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
-+    if (ret) {
-+        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
-+                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
-+    }
-+    kfree(thermal_work);
-+}
-+
- void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
- {
-+	int temp = ar->thermal.temperature;
-+    	u32 tx_mask, rx_mask;
-+    	bool need_switch = false;
-+
- 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
- 	    curr_level >= ENHANCED_THERMAL_LEVELS)
- 		return;
-@@ -416,7 +433,37 @@
- 	else
- 		ar->thermal.throttle_state =
- 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
--	spin_unlock_bh(&ar->data_lock);
-+	
-+	/* configure ant mode */
-+	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
-+        	tx_mask = 0x1;
-+        	rx_mask = 0x1;
-+        	need_switch = true;
-+    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
-+        	tx_mask = ar->thermal.default_tx_chainmask;
-+        	rx_mask = ar->thermal.default_rx_chainmask;
-+        	need_switch = true;
-+    	}
-+
-+    	spin_unlock_bh(&ar->data_lock);
-+
-+    /* set param async*/ 
-+    if (need_switch) {
-+        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
-+        if (work) {
-+            work->ar = ar;
-+            work->tx_mask = tx_mask;
-+            work->rx_mask = rx_mask;
-+            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
-+            schedule_work(&work->work);
-+            
-+            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
-+                       ar->pdev_idx, temp,
-+                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
-+                       (tx_mask > 0x1) ? "dual" : "single",
-+                       curr_level);
-+        }
-+    }
- }
- 
- static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
-@@ -459,6 +506,11 @@
- 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
- 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
- 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
-+
-+                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
-+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
-+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
-+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
- 		}
- 	} else {
- 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
-@@ -494,6 +546,10 @@
- 	for (i = 0; i < ab->num_radios; i++) {
- 		pdev = &ab->pdevs[i];
- 		ar = pdev->ar;
-+
-+		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
-+        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
-+
- 		if (!ar)
- 			continue;
- 
-diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
---- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
-+++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
-@@ -22,15 +22,15 @@
- #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
--#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
--#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
--#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
--#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
-+#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
- 
- #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
- #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
-@@ -83,6 +83,16 @@
- 	 * protected by data_lock
- 	 */
- 	int temperature;
-+
-+	u32 default_tx_chainmask;
-+    	u32 default_rx_chainmask;
-+};
-+
-+struct ath12k_thermal_work {
-+    struct work_struct work;
-+    struct ath12k *ar;
-+    u32 tx_mask;
-+    u32 rx_mask;
- };
- 
- #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION

feeds/qca-wifi-7/platform_drivers/Makefile

@@ -475,22 +475,6 @@ endef
 
 $(eval $(call KernelPackage,usb-f-qdss))
 
-define KernelPackage/usb-serial-xr
-  TITLE:=USB xr Serial driver support
-  KCONFIG:=CONFIG_USB_SERIAL_XR
-  FILES:=\
-        $(LINUX_DIR)/drivers/usb/serial/xr_serial.ko
-  AUTOLOAD:=$(call AutoLoad,60,xr_serial)
-  DEPENDS:=+kmod-usb-serial
-  $(call AddPlatformDepends/usb)
-endef
-
-define KernelPackage/usb-serial-xr/description
- USB MaxLinear/Exar USB to Serial driver
-endef
-
-$(eval $(call KernelPackage,usb-serial-xr))
-
 LEDS_MENU:=LED modules
 
 define KernelPackage/leds-tlc591xx

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -5,10 +5,12 @@ START=09
 copy_certificates() {
 	[ -f /certificates/key.pem ] || return
 
-	cp /certificates/cert.pem /certificates/key.pem /certificates/operational.* /etc/ucentral/
-	chown root.network /etc/ucentral/*.pem /etc/ucentral/*.ca
-	chmod 0440 root.network /etc/ucentral/*.pem /etc/ucentral/*.ca
+	cp /certificates/*.pem /etc/ucentral/
+	chown root.network /etc/ucentral/*.pem
+	chmod 0440 root.network /etc/ucentral/*.pem
 	[ -f /certificates/gateway.json ] && cp /certificates/gateway.json /etc/ucentral/gateway.flash
+	[ -f /certificates/dev-id ] && cp /certificates/dev-id /etc/ucentral/
+	[ -f /etc/ucentral/dev-id ] && chmod 0400 /etc/ucentral/dev-id
 	[ -f /certificates/restrictions.json ] && cp /certificates/restrictions.json /etc/ucentral/
 	[ -f /certificates/sign_pubkey.pem ] && cp /certificates/sign_pubkey.pem /etc/ucentral/
 	country=`cat /certificates/ucentral.defaults | jsonfilter -e '@.country'`

feeds/tip/certificates/files/etc/uci-defaults/99-tip-certificates.sh

@@ -2,6 +2,5 @@
 
 uci add system certificates
 uci set system.@certificates[-1].key=/etc/ucentral/key.pem
-uci set system.@certificates[-1].cert=/etc/ucentral/operational.pem
-uci set system.@certificates[-1].ca=/etc/ucentral/operational.ca
-uci commit
+uci set system.@certificates[-1].cert=/etc/ucentral/cert.pem
+uci set system.@certificates[-1].ca=/etc/ucentral/cas.pem

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -1,22 +1,25 @@
 #!/bin/sh
 
 check_certificates() {
-	[ -f /certificates/cert.pem -a -f /certificates/key.pem ] && exit 0
+	[ -f /certificates/cas.pem -a -f /certificates/cert.pem -a -f /certificates/key.pem ] && exit 0
 }
 
 check_certificates
 
-bootconfig_lookup() {
-	case "$(fw_printenv -n cert_part)" in
-	0)	echo "0:BOOTCONFIG"
-		;;
-	1)	echo "0:BOOTCONFIG1"
-		;;
-	esac
-}
-
 . /lib/functions.sh
 mkdir -p /certificates /etc/ucentral/
+mtd=$(find_mtd_index certificates)
+
+if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
+	mount -t squashfs /dev/mtdblock$mtd /certificates
+else
+	[ -n "$mtd" -a -f /sys/class/mtd/mtd$mtd/oobsize ] && ubiattach -p /dev/mtd$mtd
+	if [ -n "$(ubinfo -a | grep certificates)" ]; then
+		[ -e /dev/ubi0 ] && mount -t ubifs ubi0:certificates /certificates
+		[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
+	fi
+fi
+
 case "$(board_name)" in
 cig,wf660a)
 	mmc_dev=$(echo $(find_mmc_part "0:ETHPHYFW") | sed 's/^.\{5\}//')
@@ -28,28 +31,8 @@ cig,wf672)
 	;;
 sonicfi,rap7110c-341x)
 	mmc_dev=$(echo $(find_mmc_part "certificates") | sed 's/^.\{5\}//')
-	[ -n "$mmc_dev" ] && mount -t squashfs /dev/$mmc_dev /mnt
-	bootconfig=$(bootconfig_lookup)
-	if [ -n "$bootconfig" ]; then
-		mmc_dev=$(echo $(find_mmc_part "$bootconfig") | sed 's/^.\{5\}//')
-		[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
-	else
-		cp /mnt/* /certificates/
-		umount /mnt
-	fi
+	[ -n "$mmc_dev" ] && mount -t squashfs /dev/$mmc_dev /certificates
 	;;
-*)
-	mtd=$(find_mtd_index certificates)
-
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /certificates
-	else
-		[ -n "$mtd" -a -f /sys/class/mtd/mtd$mtd/oobsize ] && ubiattach -p /dev/mtd$mtd
-		if [ -n "$(ubinfo -a | grep certificates)" ]; then
-			[ -e /dev/ubi0 ] && mount -t ubifs ubi0:certificates /certificates
-			[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
-		fi
-	fi
 esac
 
 check_certificates
@@ -105,10 +88,6 @@ cig,wf189h|\
 cig,wf186h|\
 cig,wf196|\
 cig,wf188n|\
-emplus,wap380c|\
-emplus,wap385c|\
-emplus,wap386v2|\
-emplus,wap581|\
 yuncore,ax840|\
 yuncore,fap655)
 	PART_NAME=rootfs_1

feeds/tip/certificates/files/usr/bin/store_certs

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-bootconfig_lookup() {
-	bootconfig="$(fw_printenv -n cert_part)"
-	case "$(fw_printenv -n cert_part)" in
-	0)	echo "0:BOOTCONFIG1"
-		bootconfig=1
-		;;
-	*)	echo "0:BOOTCONFIG"
-		bootconfig=0
-		;;
-	esac
-	fw_setenv cert_part $bootconfig
-}
-
-. /lib/functions.sh
-case "$(board_name)" in
-sonicfi,rap7110c-341x)
-	cd /certificates
-	tar cf /tmp/certs.tar
-	bootconfig=$(bootconfig_lookup)
-	mmc_dev=$(echo $(find_mmc_part $bootconfig) | sed 's/^.\{5\}//')
-	dd if=/tmp/certs.tar of=/dev/$bootconfig
-	;;
-esac

feeds/tip/cloud_discovery/Makefile

@@ -12,7 +12,6 @@ define Package/cloud_discovery
   SECTION:=ucentral
   CATEGORY:=uCentral
   TITLE:=TIP cloud_discovery
-  DEPENDS:=+certificates
 endef
 
 Build/Compile=

feeds/tip/cloud_discovery/files/etc/init.d/cloud_discover

@@ -22,6 +22,13 @@ start_service() {
 	[ "$valid" == "true" ] || 
 		/usr/share/ucentral/ucentral.uc /etc/ucentral/ucentral.cfg.0000000001 > /dev/null
 
+	[ "$(fw_printenv -n pki2)" -eq 1 ] || {
+		/etc/init.d/cloud_discover disable
+		return
+	}
+
+	/etc/init.d/firstcontact disable
+
 	procd_open_instance
 	procd_set_param command "$PROG"
 	procd_set_param respawn

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -80,7 +80,7 @@ function gateway_write(data) {
 	gateway ??= {};
 	let new = {};
 	let changed = false;
-	for (let key in [ 'server', 'port', 'valid', 'hostname_validate' ]) {
+	for (let key in [ 'server', 'port', 'valid' ]) {
 		if (exists(data, key))
 			new[key] = data[key];
 		else if (exists(gateway, key))
@@ -144,7 +144,7 @@ function set_state(set) {
 function discover_dhcp() {
 	let dhcp = readjsonfile('/tmp/cloud.json');
 	if (dhcp?.dhcp_server && dhcp?.dhcp_port) {
-		if (gateway_write({ server: dhcp.dhcp_server, port:dhcp.dhcp_port, valid: false, hostname_validate: dhcp.no_validation ? 0 : 1 })) {
+		if (gateway_write({ server: dhcp.dhcp_server, port:dhcp.dhcp_port, valid: false })) {
 			ulog(LOG_INFO, `Discovered cloud via DHCP ${dhcp.dhcp_server}:${dhcp.dhcp_port}\n`);
 			client_start();
 			set_state(VALIDATING);
@@ -160,30 +160,27 @@ function redirector_lookup() {
 	let serial = uci.get('system', '@system[-1]', 'mac');
 
 	fs.unlink(path);
-	system(`curl -k --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/operational.ca https://openlan.keys.tip.build/v1/devices/${serial} --output /tmp/ucentral.redirector`);
+	system(`curl -k --cert /etc/ucentral/cert.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/cas.pem https://openlan.keys.tip.build/v1/devices/${serial} --output /tmp/ucentral.redirector`);
 	if (!fs.stat(path))
 		return;
 	let redir = readjsonfile(path);
 	if (redir?.controller_endpoint) {
 		let controller_endpoint = split(redir.controller_endpoint, ':');
-		if (gateway_write({ server: controller_endpoint[0], port: controller_endpoint[1] || 15002, valid: false, hostname_validate: 1 })) {
-			ulog(LOG_INFO, `Discovered cloud via lookup service ${controller_endpoint[0]}:${controller_endpoint[1] || 15002}\n`);
+		if (gateway_write({ server: controller_endpoint[0], port: controller_endpoint[1] || 15002, valid: false })) {
+			ulog(LOG_INFO, `Discovered cloud via lookup service ${redir.server}:${redir.port}\n`);
                         client_start();
                 	set_state(VALIDATING);
 		}
-	} else {
-		ulog(LOG_INFO, 'Failed to discover cloud endpoint\n');
 	}
 }
 
 function discover_flash() {
 	if (!fs.stat('/etc/ucentral/gateway.flash'))
-		return 1;
+		return false;
 	ulog(LOG_INFO, 'Using pre-populated cloud information\n');
 	fs.writefile('/etc/ucentral/gateway.json', fs.readfile('/etc/ucentral/gateway.flash'));
 	client_start();
 	set_state(VALIDATING);
-	return 0;
 }
 
 function time_is_valid() {
@@ -213,10 +210,7 @@ function interval_handler() {
 		if (discover_dhcp())
 			return;
 
-		if (system('/usr/bin/est_client enroll'))
-			return;
-
-		if (!discover_flash())
+		if (discover_flash())
 			return;
 
 		redirector_lookup();
@@ -293,25 +287,6 @@ let ubus_methods = {
 
 		}
 	},
-	status: {
-		call: function(req) {
-			const names = [ 'discover', 'validate', 'online', 'offline', 'orphan' ];
-			let ret = { state: names[state] };
-			switch(state){
-			case OFFLINE:
-				ret.since = time() - offline_time;
-				break;
-			case ORPHAN:
-				ret.since = time() - orphan_time;
-				break;
-			case VALIDATING:
-				ret.since = time() - validate_time;;
-				break;
-			}
-			return ret;
-		},
-		args: {},
-	},
 };
 
 if (gateway_available()) {

feeds/tip/cloud_discovery/files/usr/bin/est_client

@@ -1,172 +0,0 @@
-#!/usr/bin/ucode
-
-'use strict';
-
-import { ulog_open, ulog, ULOG_SYSLOG, ULOG_STDIO, LOG_DAEMON, LOG_INFO } from 'log';
-import * as fs from 'fs';
-
-
-ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "est_client");
-
-function generate_csr(cert) {
-	if (!fs.stat('/tmp/csr.nohdr.p10')) {
-		let pipe = fs.popen(`openssl x509 -in ${cert} -noout -subject`);
-		let subject = pipe.read("all");
-		pipe.close();
-		subject = rtrim(subject);
-		subject = replace(subject, 'subject=', '/');
-		subject = replace(subject, ' = ', '=');
-		subject = replace(subject, ', ', '/');
-
-		let ret = system(`openssl req -subj "${subject}" -new -key /etc/ucentral/key.pem -out /tmp/csr.p10`);
-		if (ret) {
-			ulog(LOG_INFO, 'Failed to generate CSR\n');
-			return 1;
-		}
-
-		let input = fs.open('/tmp/csr.p10', 'r');
-		let output = fs.open('/tmp/csr.nohdr.p10', 'w');
-		let line;
-		while (line = input.read('line')) {
-		        if (substr(line, 0, 4) == '----')
-		                continue;
-			output.write(line);
-		}
-		input.close();
-		output.close();
-		ulog(LOG_INFO, 'Generated CSR\n');
-	}
-	return 0;
-}
-
-function store_operational_cert(path, target) {
-	system('mount_certs');
-	system(`cp ${path} /certificates/${target}`);
-	system('store_certs');
-
-	ulog(LOG_INFO, `Persistently stored ${target}\n`);
-}
-
-function p7_too_pem(src, dst) {
-	let input = fs.readfile(src);
-	let output = fs.open('/tmp/convert.p7', 'w');
-	output.write('-----BEGIN PKCS #7 SIGNED DATA-----\n');
-	output.write(`${input}\n-----END PKCS #7 SIGNED DATA-----`);
-	output.close();
-
-	let ret = system(`openssl pkcs7 -outform PEM -print_certs -in /tmp/convert.p7 -out ${dst}`);
-	if (ret) {
-		ulog(LOG_INFO, 'Failed to convert P7 to PEM\n');
-		return 1;
-	}
-	
-	ulog(LOG_INFO, 'Converted P7 to PEM\n');
-	
-	return 0;
-}
-
-function call_est_server(path, cert, target) {
-	if (generate_csr(cert))
-		return 1;
-
-	let ret = system('curl -X POST https://qaest.certificates.open-lan.org:8001/.well-known/est/' + path + ' -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert ' + cert + ' --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
-	if (ret) {
-		ulog(LOG_INFO, 'Failed to request operational certificate\n');
-		return 1;
-	}
-	ulog(LOG_INFO, 'EST succeeded\n');
-
-	return p7_too_pem('/tmp/operational.nohdr.p7', target);
-}
-
-
-function simpleenroll() {
-	if (fs.stat('/etc/ucentral/operational.pem')) {
-		ulog(LOG_INFO, 'Operational certificate is present\n');
-		return 0;
-	}
-
-	if (call_est_server('simpleenroll', '/etc/ucentral/cert.pem', '/etc/ucentral/operational.pem'))
-		return 1; 
-	
-	ulog(LOG_INFO, 'Operational cert acquired\n');
-	store_operational_cert('/etc/ucentral/operational.pem', 'operational.pem');
-	return 0;
-}
-
-function simplereenroll() {
-	if (!fs.stat('/etc/ucentral/operational.pem')) {
-		ulog(LOG_INFO, 'Operational certificate was not found\n');
-		return 0;
-	}
-
-	if (call_est_server('simplereenroll', '/etc/ucentral/operational.pem', '/tmp/operational.pem'))
-		return 1;
-	
-	ulog(LOG_INFO, 'Operational cert updated\n');
-	store_operational_cert('/tmp/operational.pem', 'operational.pem');
-
-	return 0;
-}
-
-function load_operational_ca() {
-	if (fs.stat('/etc/ucentral/operational.ca')) {
-		ulog(LOG_INFO, 'Operational CA is present\n');
-		return 0;
-	}
-	let ret = system('curl -X GET https://qaest.certificates.open-lan.org:8001/.well-known/est/cacerts --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.ca.nohdr.p7');
-	if (!ret)
-		ret = p7_too_pem('/tmp/operational.ca.nohdr.p7', '/etc/ucentral/operational.ca');
-	if (ret) {
-		ulog(LOG_INFO, 'Failed to load CA\n');
-		return 1;
-	}
-	system('cat /etc/ucentral/openlan.pem >> /etc/ucentral/operational.ca');
-	ulog(LOG_INFO, 'Acquired CA\n');
-	store_operational_cert('/etc/ucentral/operational.ca', 'operational.ca');
-	return 0;
-}
-
-function fwtool() {
-	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
-	let issuer = pipe.read("all");
-	pipe.close();
-
-	if (!(match(issuer, /OpenLAN/) && match(issuer, /Birth CA/)))
-		return 0;
-
-	ulog(LOG_INFO, 'The issuer is insta\n');
-
-	let metadata = fs.readfile('/tmp/sysupgrade.meta');
-	if (metadata)
-		metadata = json(metadata);
-	if (!metadata)
-		return 0;
-
-	if (!metadata.est_supported) {
-		ulog(LOG_INFO, 'The image does not support EST\n');
-		return 1;
-	}
-	ulog(LOG_INFO, 'The image supports EST\n');
-
-	return 0;
-}
-
-switch(ARGV[0]) {
-case 'enroll':
-	if (simpleenroll())
-		exit(1);
-
-	if (load_operational_ca())
-		exit(1);
-
-	exit(0);
-
-case 'reenroll':
-	if (simplereenroll())
-		exit(1);
-	exit(0);
-
-case 'fwtool':
-	exit(fwtool());
-}

feeds/tip/cloud_discovery/files/usr/share/ucentral/cloud_discovery.uc

@@ -5,7 +5,6 @@ import * as fs from 'fs';
 
 let cmd = ARGV[0];
 let ifname = getenv("interface");
-let opt224 = getenv("opt138");
 let opt224 = getenv("opt224");
 
 if (cmd != 'bound' && cmd != 'renew')
@@ -22,13 +21,6 @@ if (file.server && file.port && file.valid)
 let cloud = {
 	lease: true,
 };
-if (opt138) {
-	let dhcp = hexdec(opt138);
-	dhcp = split(dhcp, ':');
-	cloud.dhcp_server = dhcp[0];
-	cloud.dhcp_port = dhcp[1] ?? 15002;
-	cloud.no_validation = true;
-}
 if (opt224) {
 	let dhcp = hexdec(opt224);
 	dhcp = split(dhcp, ':');
@@ -37,7 +29,7 @@ if (opt224) {
 }
 fs.writefile('/tmp/cloud.json', cloud);
 
-if ((opt138 || opt224) && cmd == 'renew') {
+if (opt224 && cmd == 'renew') {
 	let ubus = libubus.connect();
 	ubus.call('cloud', 'renew');
 }

feeds/tip/firstcontact/Makefile

@@ -0,0 +1,25 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=firstcontact
+PKG_RELEASE:=1
+
+PKG_LICENSE:=BSD-3-Clause
+PKG_MAINTAINER:=John Crispin <john@phrozen.org>
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/firstcontact
+  SECTION:=ucentral
+  CATEGORY:=uCentral
+  TITLE:=TIP DigiCert firstcontact
+  DEPENDS:=+libubox +libcurl +libopenssl +certificates
+endef
+
+define Package/firstcontact/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/digicert $(1)/usr/sbin/
+	$(CP) ./files/* $(1)
+endef
+
+$(eval $(call BuildPackage,firstcontact))

feeds/tip/firstcontact/files/etc/init.d/firstcontact

@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+PROG=/usr/bin/ucode
+
+start_service() {
+	procd_open_instance
+	procd_set_param command "$PROG" -l uci -l fs /usr/share/ucentral/firstcontact.uc
+	procd_set_param respawn 1 10 0
+	procd_close_instance
+}

feeds/tip/firstcontact/files/etc/uci-defaults/zzz-firstcontact

@@ -0,0 +1,3 @@
+#!/bin/sh
+[ -f "/etc/ucentral/gateway.json" ] && /etc/init.d/firstcontact disable
+[ -f "/etc/ucentral/gateway.json" ] || /etc/init.d/ucentral disable

feeds/tip/firstcontact/files/usr/share/ucentral/firstcontact.uc

@@ -0,0 +1,83 @@
+let config = {};
+
+function store_config() {
+	let redir = split(config.Redirector, ":");
+	let gw = {
+		server: redir[0],
+		port: redir[1] || 15002
+	};
+	fs.writefile('/etc/ucentral/gateway.json', gw);
+}
+
+function store_config_uci(path) {
+        let cursor = uci.cursor(path);
+        let redir = split(config.Redirector, ":");
+
+        cursor.load("ucentral");
+        cursor.set("ucentral", "config", "server", redir[0]);
+        cursor.set("ucentral", "config", "port", redir[1] || 15002);
+        cursor.commit();
+}
+
+function digicert() {
+	let devid;
+	let fd = fs.open("/etc/ucentral/dev-id", "r");
+	if (!fd) {
+		warn("firstcontact: failed to find device id");
+		exit(1);
+	}
+	devid = fd.read("all");
+	fd.close();
+
+	ret = system(sprintf('/usr/sbin/digicert -i %s', devid));
+	if (ret) {
+		warn("firstcontact failed to contact redirector, check DHCP option\n");
+		let fd = fs.open("/tmp/capwap/dhcp_opt.txt", "r");
+		if (!fd) {
+			warn("No redirector found\n");
+			exit(1);
+		} else {
+			config.Redirector = fd.read("all");
+			fd.close();
+		}
+	} else {
+		let redirector = { };
+		let fd = fs.open("/etc/ucentral/redirector.json", "r");
+		if (fd) {
+			let data = fd.read("all");
+			fd.close();
+
+			try {
+				redirector = json(data);
+			}
+			catch (e) {
+				warn("firstcontact: Unable to parse JSON data in %s: %s", path, e);
+
+				exit(1);
+			}
+		}
+
+		for (let r in redirector.fields)
+			if (r.name && r.value)
+				config[r.name] = r.value;
+		if (!config.Redirector) {
+			warn("Reply is missing Redirector field\n");
+			exit(1);
+		}
+
+	}
+}
+
+if (!fs.stat('/etc/ucentral/gateway.json')) {
+	digicert();
+	store_config();
+	store_config_uci();
+	store_config_uci("/etc/config-shadow/");
+	warn("firstcontact: managed to look up redirector\n");
+}
+
+system("/etc/init.d/ucentral enable");
+system("/etc/init.d/firstcontact disable");
+system("reload_config");
+system("/etc/init.d/ucentral start");
+system("/etc/init.d/firstcontact stop");

feeds/tip/firstcontact/src/CMakeLists.txt

@@ -0,0 +1,13 @@
+cmake_minimum_required(VERSION 2.6)
+
+PROJECT(digicert C)
+INCLUDE(GNUInstallDirs)
+ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
+
+ADD_EXECUTABLE(digicert digicert.c)
+TARGET_LINK_LIBRARIES(digicert curl crypto ssl ubox)
+INSTALL(TARGETS digicert
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)

feeds/tip/firstcontact/src/digicert.c

@@ -0,0 +1,104 @@
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <unistd.h>
+#include <getopt.h>
+
+#include <curl/curl.h>
+
+#include <libubox/ulog.h>
+
+static const char *file_cert = "/etc/ucentral/cert.pem";
+static const char *file_key  = "/etc/ucentral/key.pem";
+static const char *file_json = "/etc/ucentral/redirector.json";
+static const char *file_dbg  = "/tmp/digicert.hdr";
+
+int main(int argc, char **argv)
+{
+	FILE *fp_json;
+	FILE *fp_dbg;
+	CURLcode res;
+	CURL *curl;
+	char *devid = NULL;
+	char *url;
+
+	alarm(15);
+
+	while (1) {
+		int option = getopt(argc, argv, "k:c:o:hi:");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case 'k':
+			file_key = optarg;
+			break;
+		case 'c':
+			file_cert = optarg;
+			break;
+		case 'o':
+			file_json = optarg;
+			break;
+		case 'i':
+			devid = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: digicert OPTIONS\n"
+			       "  -k <keyfile>\n"
+			       "  -c <certfile>\n"
+			       "  -o <outfile>\n"
+			       "  -i <devid>\n");
+			return -1;
+		}
+	}
+
+	if (!devid) {
+		fprintf(stderr, "missing devid\n");
+		return -1;
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "digicert");
+	ULOG_INFO("attempting first contact\n");
+
+	fp_dbg = fopen(file_dbg, "wb");
+	fp_json = fopen(file_json, "wb");
+	if (!fp_json) {
+		ULOG_ERR("failed to create %s\n", file_json);
+		return -1;
+	}
+
+	curl_global_init(CURL_GLOBAL_DEFAULT);
+	curl = curl_easy_init();
+	if (!curl) {
+		ULOG_ERR("curl_easy_init failed\n");
+		return -1;
+	}
+
+	if (asprintf(&url, "https://clientauth.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
+		ULOG_ERR("failed to assemble url\n");
+		return -1;
+	}
+
+	curl_easy_setopt(curl, CURLOPT_URL, url);
+	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
+	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
+	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
+	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
+	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
+	curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT, 10L);
+
+	res = curl_easy_perform(curl);
+	if (res != CURLE_OK)
+		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
+	else
+		ULOG_INFO("downloaded first contact data\n");
+	curl_easy_cleanup(curl);
+	curl_global_cleanup();
+
+	ulog_close();
+
+	return (res != CURLE_OK);
+}

feeds/tip/luci/luci-mod-ucentral/root/sbin/certupdate

@@ -17,16 +17,14 @@ mkdir -p /tmp/certs
 tar x -C /tmp/certs -f /tmp/certs.tar
 
 # make sure the required files exist
-[ -f /tmp/certs/key.pem -a -f /tmp/certs/cert.pem ] || exit 1
+[ -f /tmp/certs/cas.pem -a -f /tmp/certs/key.pem -a -f /tmp/certs/cert.pem ] || exit 1
+[ -f /tmp/certs/gateway.json -o -f /tmp/certs/dev-id ] || exit 1
 
 # copy the certificates to /etc
 cp /tmp/certs/*.pem /certificates
 
-# remove old operational certs
-rm /certificates/operational.*
-
 # copy dev-id or gateway.json
-for a in gateway.json; do
+for a in dev-id gateway.json; do
 	if [ -f /tmp/certs/$a ]; then
 		cp /tmp/certs/$a /certificates
 	else

feeds/tip/tip-defaults/files/etc/ucentral/insta.pem

@@ -1,6 +0,0 @@
------BEGIN CERTIFICATE-----
-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
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-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
------END CERTIFICATE-----

feeds/ucentral/poe/Makefile

@@ -1,42 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=poe
-PKG_VERSION:=1.0
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_ipq50xx_generic_DEVICE_sonicfi_rap630w_311g),y)
-TARGET_CFLAGS += -DPLATFORM_EWW631_B1=1
-endif
-
-define Package/poe
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=Turn on/off PoE ports with TSP23861 chipset
-	DEPENDS:= +libubox +libubus +libuci +libi2c
-endef
-
-define Package/poe/description
-  Turn on/off PoE ports
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-
-define Package/poe/install
-	$(INSTALL_DIR) $(1)
-	$(INSTALL_DIR) $(1)/etc/config $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/poe.init $(1)/etc/init.d/poe
-	$(INSTALL_BIN) ./files/poe.config $(1)/etc/config/poe
-
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tps23861-poe-ctrl $(1)/usr/bin
-endef
-
-$(eval $(call BuildPackage,poe))