Remove HW watchdog

Signed-off-by: cpchangemplu <cp.chang@emplustech.com>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
+        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'emplus_wap581', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -63,7 +63,8 @@ ALLWIFIBOARDS:= \
 	yuncore-fap655 \
 	udaya-a6-id2 \
 	udaya-a6-od2 \
-	meshpp-s618
+	meshpp-s618 \
+	emplus-wap581
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ath11k-wifi-$(BOARD))
 
@@ -426,6 +427,7 @@ $(eval $(call generate-ath11k-wifi-package,yuncore-fap655,YunCore FAP655))
 $(eval $(call generate-ath11k-wifi-package,udaya-a6-id2,Udaya A6-ID2))
 $(eval $(call generate-ath11k-wifi-package,udaya-a6-od2,Udaya A6-OD2))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr5018,Wallys DR5018))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap581,emplus-wap581))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -68,6 +68,9 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
+	emplus,wap581)
+		ucidef_set_interface_wan "eth0 eth1"
+		;;
 	esac
 }
 

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -140,6 +140,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
+	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -163,6 +164,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
+	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -91,6 +91,7 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
+	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -138,6 +139,7 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
+	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts

@@ -0,0 +1,831 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP581";
+	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <&tlmm 0x27 0>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x3e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+					port@4 {
+						port_id = <5>;
+						phy_address = <4>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+				led@28 {
+					label = "led_blue";
+					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@38 {
+					label = "led_red";
+					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@46 {
+					label = "led_green";
+					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+		};
+
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};		
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red { /* POWER_LED */
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green { /* 2G_LED */
+			pins = "gpio46";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,rproc = <&q6_wcss_pd1>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x23>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+&pcie_x2 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+	status = "disabled";	
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -228,3 +228,16 @@ define Device/glinet_b3000
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
+
+define Device/emplus_wap581
+  DEVICE_TITLE := Emplus WAP581
+  DEVICE_DTS := qcom-ipq5018-emplus-wap581
+  SUPPORTED_DEVICES := emplus,wap581
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+  IMAGES := sysupgrade.tar nand-factory.bin
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
+endef
+TARGET_DEVICES += emplus_wap581
+

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -89,6 +89,7 @@ cig,wf186h|\
 cig,wf196|\
 cig,wf188n|\
 emplus,wap385c|\
+emplus,wap581|\
 emplus,wap386v2|\
 yuncore,ax840|\
 yuncore,fap655)

profiles/emplus_wap581.yml

@@ -0,0 +1,27 @@
+---
+profile: emplus_wap581
+target: ipq50xx
+subtarget: generic
+description: Build image for Emplus WAP581
+image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-emplus_wap581-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq50xx
+  - iperf3
+  - lscpu
+  - tree
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=512
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+  CONFIG_BUSYBOX_CONFIG_MPSTAT=y
+  CONFIG_BUSYBOX_CONFIG_PSTREE=y
+