mediatek: Add EMPLUS WAP588M model

Specifications:
SoC: MediaTek MT7981B
RF Chipset: MT7976C @2.4GHz 2T2R
MT7976C @5ghz 2T2R
RAM: 512MB DDR4 RAM
Flash: SPI-NAND 128 MiB
Ethernet: 2 x 1GbE PHY
Reset Button: 1
Power on/off switch dip: 1
Power Source: Standard PoE 802.3af/at
LED Indicator: 5x Single-color LED indicator (GPIO Control)

Signed-off-by: 800246@emplustech.com <cp.chang@emplustech.com>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -53,6 +53,7 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
+	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -410,6 +411,7 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -21,6 +21,7 @@ edgecore,oap103)
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
+sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -24,6 +24,7 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
+	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -50,6 +51,16 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	sonicfi,rap650c)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,6 +16,20 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_sonicfi() {
+	mac=$(fw_printenv -n BaseMacAddress)
+	[ -z "$mac" ] && return;
+
+	touch /lib/firmware/ath11k-macs
+	eth=$(macaddr_canonicalize $mac)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
+	mac3=$(macaddr_add $eth 4)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -63,6 +77,7 @@ case "$FIRMWARE" in
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
+	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -97,6 +112,9 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
+	sonicfi*)
+		ath11k_generate_macs_sonicfi
+		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,7 +10,8 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103")
+    "edgecore,oap103"|\
+    "sonicfi,rap650c")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,6 +29,7 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -83,5 +84,17 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
+	sonicfi,rap650c)
+		boot_part=$(fw_printenv -n bootfrom)
+		[ ${#boot_part} -eq 0 ] && boot_part=0
+		echo "Current bootfrom is $boot_part"
+		if [[ $boot_part == 1 ]]; then
+			CI_UBIPART="rootfs"
+			CI_FWSETENV="bootfrom 0"
+		elif [[ $boot_part == 0 ]]; then
+			CI_UBIPART="rootfs_1"
+			CI_FWSETENV="bootfrom 1"
+		fi
+		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "SonicFi RAP650C";
+	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
+	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio57";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			usb_mux_sel_pins: usb_mux_pins {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			pcie0_pins: pcie_pins {
+				pcie0_rst {
+					pins = "gpio58";
+					function = "pcie0_rst";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				pcie0_wake {
+					pins = "gpio59";
+					function = "pcie0_wake";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio25";
+					function = "gpio";
+					bias-pull-up;
+				};
+				mux_3 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			led_pins: led_pins {
+				red {
+					pins = "gpio0";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				green {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				blue {
+					pins = "gpio9";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			spi_3_pins: spi_3_pins {
+				mux {
+					pins = "gpio50", "gpio52", "gpio53";
+					function = "blsp3_spi";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				spi_cs {
+					pins = "gpio22";
+					function = "blsp3_spi2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				quartz_interrupt {
+					pins = "gpio47";
+					function = "gpio";
+					input;
+					bias-disable;
+				};
+				quartz_reset {
+					pins = "gpio21";
+					function = "gpio";
+					output-low;
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <5>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <24>;
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001a00 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@78b8000 {
+			status = "ok";
+			pinctrl-0 = <&spi_3_pins>;
+			pinctrl-names = "default";
+			cs-select = <2>;
+			quartz-reset-gpio = <&tlmm 21 1>;
+
+			spidev3: spi@3 {
+				  compatible = "qti,spidev";
+				  reg = <0>;
+				  spi-max-frequency = <24000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		phy@84000 {
+			status = "ok";
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			perst-gpio = <&tlmm 58 1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+
+			red {
+				label = "sys:red";
+				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			green {
+				label = "sys:green";
+				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_power: blue {
+				label = "sys:blue";
+				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <24>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <24>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x90>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,6 +57,17 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
+define Device/sonicfi_rap650c
+  DEVICE_TITLE := SonicFi RAP650C
+  DEVICE_DTS := qcom-ipq807x-rap650c
+  DEVICE_DTS_CONFIG=config@hk09
+  SUPPORTED_DEVICES := sonicfi,rap650c
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap650c
+
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-emplus-wap588m.dts

@@ -0,0 +1,349 @@
+/dts-v1/;
+#include "mt7981.dtsi"
+/ {
+	model = "Emplus WAP588M";
+	compatible = "emplus,wap588m";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x10000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+				};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+
+		};
+		wifi2g {
+			label = "wifi2g";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ra0";
+		};
+		wifi5g {
+			label = "wifi5g";
+			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "rax0";
+		};
+		lan {
+			label = "lan";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "eth0";
+		};
+		wan {
+			label = "wan";
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "eth1";
+		};
+	};
+
+	nmbm_spim_nand {
+		compatible = "generic,nmbm";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		lower-mtd-device = <&spi_nand>;
+		forced-create;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x00000 0x0100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x0100000 0x0080000>;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x0200000>;
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x0200000>;
+			};
+
+			partition@580000 {
+				label = "ubi"; //110MB
+				reg = <0x580000 0x3700000>;
+			};
+
+			partition@3C80000 {
+				label = "ubi_1"; //110MB
+				reg = <0x3C80000 0x3700000>;
+			};
+
+			partition@7380000 {
+				label = "cert"; //384KB
+				reg = <0x7380000 0x0060000>;
+			};
+
+			partition@73E0000 {
+				label = "userconfig"; //640KB
+				reg = <0x73E0000 0x00a0000>;
+			};
+
+			partition@7480000 {
+				label = "crashdump"; //384KB
+				reg = <0x7480000 0x0060000>;
+			};
+		};
+	};
+
+	sound_wm8960 {
+		compatible = "mediatek,mt79xx-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing = "Headphone", "HP_L",
+				"Headphone", "HP_R",
+				"LINPUT1", "AMIC",
+				"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		status = "disabled";
+	};
+
+	sound_si3218x {
+		compatible = "mediatek,mt79xx-si3218x-machine";
+		mediatek,platform = <&afe>;
+		mediatek,ext-codec = <&proslic_spi>;
+		status = "disabled";
+	};
+};
+
+&afe {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcm_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "disabled";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&eth {
+        status = "okay";
+
+        gmac0: mac@0 {
+                compatible = "mediatek,eth-mac";
+                reg = <0>;
+                phy-mode = "sgmii";
+                phy-handle = <&phy1>;
+        };
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&phy0>;
+	};
+
+        mdio: mdio-bus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+		// MT7981 internal PHY
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id03a2.9461";
+			reg = <0>;
+			phy-mode = "gmii";
+			nvmem-cells = <&phy_calibration>;
+			nvmem-cell-names = "phy-cal-data";
+		};
+
+
+		// RTL8211FS PHY
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <120000>;
+			reset-deassert-us = <120000>;
+			phy-mode = "sgmii";
+		};
+    };
+};
+
+&hnat {
+	mtketh-wan = "eth1";
+	mtketh-lan = "eth0";
+	mtketh-max-gmac = <2>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+
+	proslic_spi: proslic_spi@0 {
+		compatible = "silabs,proslic_spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		channel_count = <1>;
+		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
+		reset_gpio = <&pio 15 0>;
+		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
+	};
+};
+
+&wbsys {
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+	status = "okay";
+	pinctrl-names = "dbdc";
+	pinctrl-0 = <&wf_dbdc_pins>;
+};
+
+&pio {
+
+	i2c_pins: i2c-pins-g0 {
+                mux {
+                        function = "i2c";
+                        groups = "i2c0_0";
+                };
+        };
+
+        pcm_pins: pcm-pins-g0 {
+                mux {
+                        function = "pcm";
+                        groups = "pcm";
+                };
+        };
+
+        pwm0_pin: pwm0-pin-g0 {
+                mux {
+                        function = "pwm";
+                        groups = "pwm0_0";
+                };
+        };
+
+        pwm1_pin: pwm1-pin-g0 {
+                mux {
+                        function = "pwm";
+                        groups = "pwm1_0";
+                };
+        };
+
+        pwm2_pin: pwm2-pin {
+                mux {
+                        function = "pwm";
+                        groups = "pwm2";
+                };
+        };
+
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	spic_pins: spi1-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_1";
+		};
+	};
+
+	uart1_pins: uart1-pins-g1 {
+                mux {
+                        function = "uart";
+                        groups = "uart1_1";
+                };
+        };
+
+	uart2_pins: uart2-pins-g1 {
+		mux {
+                        function = "uart";
+                        groups = "uart2_1";
+                };
+        };
+	wf_dbdc_pins: wf_dbdc-pins {
+		mux {
+			function = "eth";
+			groups = "wf0_mode1";
+		};
+		conf {
+			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
+			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
+			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
+			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
+			       "WF_CBA_RESETB", "WF_DIG_RESETB";
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+	};
+};
+
+&xhci {
+	mediatek,u3p-dis-msk = <0x0>;
+	phys = <&u2port0 PHY_TYPE_USB2>,
+	       <&u3port0 PHY_TYPE_USB3>;
+	status = "disabled";
+};

feeds/mediatek-sdk/mediatek/image/mt7981.mk

@@ -307,3 +307,28 @@ define Device/senao_jeap6500
 endef
 TARGET_DEVICES += senao_jeap6500
 DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME
+
+define Device/emplus_wap588m
+   DEVICE_VENDOR := EMPLUS
+   DEVICE_MODEL := WAP588M
+   DEVICE_DTS := mt7981-emplus-wap588m
+   DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
+   SUPPORTED_DEVICES := emplus,wap588m
+   DEVICE_PACKAGES := kmod-mt7981-firmware kmod-mt7915e uboot-envtools -procd-ujail
+   UBINIZE_OPTS := -E 5
+   BLOCKSIZE := 128k
+   PAGESIZE := 2048
+   IMAGE_SIZE := 65536k
+   KERNEL_IN_UBI := 1
+   FIT_KEY_DIR := $(DTS_DIR)/mediatek/keys/emplus_wap588m
+   FIT_KEY_NAME := fit_key
+   IMAGES += factory.bin
+   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+   KERNEL = kernel-bin | lzma | \
+     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+   KERNEL_INITRAMFS = kernel-bin | lzma | \
+     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+ endef
+ TARGET_DEVICES += emplus_wap588m
+ DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/uci-defaults/30_uboot-envtools

@@ -18,6 +18,7 @@ case "$board" in
 edgecore,eap111|\
 edgecore,eap112|\
 senao,iap2300m|\
+emplus,wap588m|\
 senao,jeap6500)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -2,13 +2,13 @@ REQUIRE_IMAGE_METADATA=1
 
 senao_swap_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
-	tmp_active_fw=$(fw_printenv -n active_fw)
+        tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
 	if [ $tmp_active_fw == "0" ]; then
 		fw_setenv active_fw 1
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi_1\),112640k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi_1\),56320k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
 	else
 		fw_setenv active_fw 0
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi\),112640k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi\),56320k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
 	fi
 }
 
@@ -47,6 +47,7 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	senao,iap2300m|\
+	emplus,wap588m|\
 	senao,jeap6500)
 		CI_UBIPART="ubi_1"
 		nand_do_upgrade "$1"
@@ -68,6 +69,7 @@ platform_check_image() {
 	edgecore,eap111|\
 	edgecore,eap112|\
 	senao,iap2300m|\
+	emplus,wap588m|\
 	senao,jeap6500)
 		nand_do_platform_check "$board" "$1"
 		return $?

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -53,11 +53,27 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750W_311a
 endef
 
+define Package/ath12k-wifi-cig-wf189h
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for WF189H
+endef
+
 define Package/ath12k-wifi-cig-wf189w
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF189W
 endef
 
+define Package/ath12k-wifi-sercomm-ap72tip
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for AP72TIP
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip-v4
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for AP72TIP-v4
+endef
+
+
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -96,8 +112,34 @@ define Package/ath12k-wifi-cig-wf189w/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
+
+define Package/ath12k-wifi-cig-wf189h/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.ap72tip.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.ap72tip.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip-v4/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+endef
+
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
+$(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
+$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
+$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-v4-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-v4-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -9,3 +9,9 @@ $encoder -c board-2-eap105-QCN92XX.json -o board-2.bin.eap105.QCN92XX
 
 $encoder -c board-2-rap7110c_341x-IPQ5332.json -o board-2.bin.rap7110c_341x.IPQ5332
 $encoder -c board-2-rap7110c_341x-QCN92XX.json -o board-2.bin.rap7110c_341x.QCN92XX
+
+$encoder -c board-2-ap72tip-IPQ5332.json -o board-2.bin.ap72tip.IPQ5332
+$encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
+
+$encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
+$encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -126,12 +126,15 @@ hostapd_common_add_device_config() {
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
+	config_add_boolean maxassoc_ignore_probe
 
 	config_add_string acs_chan_bias
+	config_add_boolean acs_exclude_dfs
 	config_add_array hostapd_options
 
 	config_add_int airtime_mode
 	config_add_int mbssid
+	config_add_boolean rnr_beacon ema
 
 	hostapd_add_log_config
 }
@@ -142,10 +145,11 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
 		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
-		mbssid:0 band reg_power_type stationary_ap
+		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
+		maxassoc_ignore_probe band
 
 	hostapd_set_log_options base_cfg
 
@@ -155,6 +159,9 @@ hostapd_prepare_device_config() {
 	set_default legacy_rates 0
 	set_default airtime_mode 0
 	set_default cell_density 0
+	set_default rnr_beacon 0
+	set_default ema 0
+	set_default acs_exclude_dfs 0
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
@@ -244,8 +251,14 @@ hostapd_prepare_device_config() {
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 	append base_cfg "beacon_int=$beacon_int" "$N"
 	[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
+	append base_cfg "dtim_period=$dtim_period" "$N"
 	[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
 	[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
+	[ "$maxassoc_ignore_probe" -gt 0 ] && append base_cfg "no_probe_resp_if_max_sta=1" "$N"
+	[ "$rnr_beacon" -gt 0 ] && append base_cfg "rnr_beacon=$rnr_beacon" "$N"
+	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
+	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"
+
 	[ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N"
 
 	[ "$band" = "6g" ] && {
@@ -287,15 +300,24 @@ hostapd_common_add_bss_config() {
 	config_add_int ieee80211w
 	config_add_int eapol_version
 
-	config_add_array auth_server acct_server
-	config_add_string 'server:host'
+	config_add_string 'auth_server:host' 'server:host'
 	config_add_string auth_secret key
 	config_add_int 'auth_port:port' 'port:port'
 
+	config_add_string acct_server
 	config_add_string acct_secret
 	config_add_int acct_port
+
+	config_add_string acct_server_secondary
+	config_add_string acct_secret_secondary
+	config_add_int acct_port_secondary
+
 	config_add_int acct_interval
 
+	config_add_string auth_server_secondary
+	config_add_string auth_secret_secondary
+	config_add_int auth_port_secondary
+
 	config_add_int bss_load_update_period chan_util_avg_period
 
 	config_add_string dae_client
@@ -339,8 +361,8 @@ hostapd_common_add_bss_config() {
 	config_add_string lci civic
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
-	config_add_int r0_key_lifetime reassociation_deadline
-	config_add_string mobility_domain r1_key_holder
+	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
+	config_add_string mobility_domain r1_key_holder ft_key
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -391,14 +413,18 @@ hostapd_common_add_bss_config() {
 	config_add_array radius_auth_req_attr
 	config_add_array radius_acct_req_attr
 
-	config_add_int eap_server radius_server_auth_port
-	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients
+	config_add_int eap_server
+	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
 
 	config_add_boolean fils
 	config_add_string fils_dhcp
 
+	config_add_boolean ratelimit
 	config_add_int ocv
 
+	config_add_string uci_section
+	config_add_boolean dynamic_probe_resp
+
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
 }
@@ -433,6 +459,7 @@ hostapd_set_psk() {
 	local ifname="$1"
 
 	rm -f /var/run/hostapd-${ifname}.psk
+	touch /var/run/hostapd-${ifname}.psk
 	for_each_station hostapd_set_psk_file ${ifname}
 }
 
@@ -549,18 +576,83 @@ append_airtime_sta_weight() {
 	[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
 }
 
-append_auth_server() {
-	[ -n "$1" ] || return
-	append bss_conf "auth_server_addr=$1" "$N"
-	append bss_conf "auth_server_port=$auth_port" "$N"
-	[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-}
+append_radius_server() {
 
-append_acct_server() {
-	[ -n "$1" ] || return
-	append bss_conf "acct_server_addr=$1" "$N"
-	append bss_conf "acct_server_port=$acct_port" "$N"
-	[ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+	json_get_vars \
+		auth_server auth_secret auth_port \
+		auth_server_secondary auth_secret_secondary auth_port_secondary \
+		dae_client dae_secret dae_port \
+		dynamic_ownip ownip radius_client_addr \
+		eap_reauth_period request_cui \
+		erp_domain mobility_domain \
+		fils_realm fils_dhcp
+
+	set_default dynamic_ownip 1
+
+	# legacy compatibility
+	[ -n "$auth_server" ] || json_get_var auth_server server
+	[ -n "$auth_port" ] || json_get_var auth_port port
+	[ -n "$auth_secret" ] || json_get_var auth_secret key
+
+	[ "$fils" -gt 0 ] && {
+		set_default erp_domain "$mobility_domain"
+		set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
+		set_default fils_realm "$erp_domain"
+
+		append bss_conf "erp_send_reauth_start=1" "$N"
+		append bss_conf "erp_domain=$erp_domain" "$N"
+		append bss_conf "fils_realm=$fils_realm" "$N"
+		append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
+
+		[ "$fils_dhcp" = "*" ] && {
+			json_get_values network network
+			fils_dhcp=
+			for net in $network; do
+				fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
+				[ -n "$fils_dhcp" ] && break
+			done
+
+			[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
+				fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
+		}
+		[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
+	}
+
+	set_default auth_port 1812
+	set_default auth_port_secondary 1812
+	set_default dae_port 3799
+	set_default request_cui 0
+
+	[ "$eap_server" -eq 0  -a -n "$auth_server" ] && {
+		append bss_conf "auth_server_addr=$auth_server" "$N"
+		append bss_conf "auth_server_port=$auth_port" "$N"
+		append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+	}
+
+	[ -n "$auth_server_secondary" ] && {
+		append bss_conf "auth_server_addr=$auth_server_secondary" "$N"
+		append bss_conf "auth_server_port=$auth_port_secondary" "$N"
+		[ -n "$auth_secret_secondary" ] && \
+			append bss_conf "auth_server_shared_secret=$auth_secret_secondary" "$N"
+	}
+
+	[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
+	[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
+
+	[ -n "$dae_client" -a -n "$dae_secret" ] && {
+		append bss_conf "radius_das_port=$dae_port" "$N"
+		append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
+	}
+	json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
+
+	if [ -n "$ownip" ]; then
+		append bss_conf "own_ip_addr=$ownip" "$N"
+	elif [ "$dynamic_ownip" -gt 0 ]; then
+		append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+	fi
+
+	[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
+	[ "$macfilter" = radius ] && append bss_conf "macaddr_acl=2" "$N"
 }
 
 hostapd_set_bss_options() {
@@ -570,7 +662,7 @@ hostapd_set_bss_options() {
 
 	wireless_vif_parse_encryption
 
-	local bss_conf bss_md5sum ft_key
+	local bss_conf bss_md5sum
 	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 
 	json_get_vars \
@@ -581,13 +673,14 @@ hostapd_set_bss_options() {
 		wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
 		macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
 		iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
-		acct_secret acct_port acct_interval \
+		acct_server acct_secret acct_port acct_interval \
+		acct_server_secondary acct_secret_secondary acct_port_secondary \
 		bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup multi_psk
+		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -604,6 +697,7 @@ hostapd_set_bss_options() {
 	set_default tdls_prohibit 0
 	set_default eapol_version $((wpa & 1))
 	set_default acct_port 1813
+	set_default acct_port_secondary 1813
 	set_default bss_load_update_period 60
 	set_default chan_util_avg_period 600
 	set_default utf8_ssid 1
@@ -612,6 +706,7 @@ hostapd_set_bss_options() {
 	set_default airtime_bss_weight 0
 	set_default airtime_bss_limit 0
 	set_default eap_server 0
+	set_default dynamic_probe_resp 0
 	set_default apup 0
 
 	/usr/sbin/hostapd -vfils || fils=0
@@ -638,6 +733,7 @@ hostapd_set_bss_options() {
 	append bss_conf "preamble=$short_preamble" "$N"
 	append bss_conf "wmm_enabled=$wmm" "$N"
 	append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
+	append bss_conf "dynamic_probe_resp=$dynamic_probe_resp" "$N"
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
@@ -654,10 +750,22 @@ hostapd_set_bss_options() {
 
 	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 
-	[ -n "$acct_interval" ] && \
-		append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
-	json_for_each_item append_acct_server acct_server
-	json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+	[ -n "$acct_server" ] && {
+		append bss_conf "acct_server_addr=$acct_server" "$N"
+		append bss_conf "acct_server_port=$acct_port" "$N"
+		[ -n "$acct_secret" ] && \
+			append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+		[ -n "$acct_interval" ] && \
+			append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+		json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+	}
+
+	[ -n "$acct_server_secondary" ] && {
+		append bss_conf "acct_server_addr=$acct_server_secondary" "$N"
+		append bss_conf "acct_server_port=$acct_port_secondary" "$N"
+		[ -n "$acct_secret_secondary" ] && \
+			append bss_conf "acct_server_shared_secret=$acct_secret_secondary" "$N"
+	}
 
 	[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
 
@@ -690,6 +798,8 @@ hostapd_set_bss_options() {
 			# Here we make the assumption that if we're in open mode
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
+			vlan_possible=1
+			append_radius_server
 		;;
 		psk|sae|psk-sae)
 			json_get_vars key wpa_psk_file
@@ -714,74 +824,15 @@ hostapd_set_bss_options() {
 			}
 			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
+			append_radius_server
 			set_default dynamic_vlan 0
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap2|eap-eap2|eap192)
-			json_get_vars \
-				auth_server auth_secret auth_port \
-				dae_client dae_secret dae_port \
-				dynamic_ownip ownip radius_client_addr \
-				eap_reauth_period request_cui \
-				erp_domain mobility_domain \
-				fils_realm fils_dhcp
-
+		eap|eap192|eap-eap2|eap2)
+			append_radius_server
 			# radius can provide VLAN ID for clients
 			vlan_possible=1
-
-			set_default dynamic_ownip 1
-
-			# legacy compatibility
-			[ -n "$auth_server" ] || json_get_var auth_server server
-			[ -n "$auth_port" ] || json_get_var auth_port port
-			[ -n "$auth_secret" ] || json_get_var auth_secret key
-
-			[ "$fils" -gt 0 ] && {
-				set_default erp_domain "$mobility_domain"
-				set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
-				set_default fils_realm "$erp_domain"
-
-				append bss_conf "erp_send_reauth_start=1" "$N"
-				append bss_conf "erp_domain=$erp_domain" "$N"
-				append bss_conf "fils_realm=$fils_realm" "$N"
-				append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
-
-				[ "$fils_dhcp" = "*" ] && {
-					json_get_values network network
-					fils_dhcp=
-					for net in $network; do
-						fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
-						[ -n "$fils_dhcp" ] && break
-					done
-
-					[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
-						fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
-				}
-				[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
-			}
-
-			set_default auth_port 1812
-			set_default dae_port 3799
-			set_default request_cui 0
-
-			[ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server
-			[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
-			[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
-
-			[ -n "$dae_client" -a -n "$dae_secret" ] && {
-				append bss_conf "radius_das_port=$dae_port" "$N"
-				append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
-			}
-			json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
-
-			if [ -n "$ownip" ]; then
-				append bss_conf "own_ip_addr=$ownip" "$N"
-			elif [ "$dynamic_ownip" -gt 0 ]; then
-				append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
-			fi
-
-			[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 			append bss_conf "eapol_key_index_workaround=1" "$N"
 			append bss_conf "ieee8021x=1" "$N"
 
@@ -798,6 +849,7 @@ hostapd_set_bss_options() {
 			append bss_conf "wpa_psk_radius=3" "$N"
 			append_radius_server
 			vlan_possible=1
+		;;
 	esac
 
 	case "$auth_type" in
@@ -921,45 +973,42 @@ hostapd_set_bss_options() {
 		}
 	fi
 
-	json_get_vars ieee80211r
-	set_default ieee80211r 0
 	if [ "$wpa" -ge "1" ]; then
-		if [ "$fils" -gt 0 ]; then
-			json_get_vars fils_realm
-			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
-		fi
+		json_get_vars ieee80211r
+		set_default ieee80211r 0
 
-		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
-
-		hostapd_append_wpa_key_mgmt
-		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
-	fi
-
-	if [ "$wpa" -ge "2" ]; then
 		if [ "$ieee80211r" -gt "0" ]; then
-			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline ft_l2_refresh
 
 			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
-			set_default ft_over_ds 0
+			set_default ft_over_ds 1
+			set_default ft_l2_refresh 30
 			set_default reassociation_deadline 1000
+			skip_kh_setup=0
 
 			case "$auth_type" in
-				psk)
+				psk|psk-sae)
 					set_default ft_psk_generate_local 1
+					skip_kh_setup="$ft_psk_generate_local"
 				;;
 				*)
 					set_default ft_psk_generate_local 0
 				;;
 			esac
 
+			case "$auth_type" in
+				*sae*) skip_kh_setup=0;;
+			esac
+
 			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
 			append bss_conf "mobility_domain=$mobility_domain" "$N"
 			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
 			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
 			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
 
-			if [ "$ft_psk_generate_local" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+			if [ "$skip_kh_setup" -eq "0" ]; then
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
 				json_get_values r0kh r0kh
 				json_get_values r1kh r1kh
 
@@ -971,12 +1020,15 @@ hostapd_set_bss_options() {
 						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
 						return 1
 					fi
-					ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
+					[ -z "$ft_key" ] && {
+						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
 
-					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
-					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
+						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
+						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
+					}
 				}
 
+				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
 				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
@@ -989,7 +1041,18 @@ hostapd_set_bss_options() {
 				done
 			fi
 		fi
+		if [ "$fils" -gt 0 ]; then
+			json_get_vars fils_realm
+			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
+		fi
 
+		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
+
+		hostapd_append_wpa_key_mgmt
+		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
+	fi
+
+	if [ "$wpa" -ge "2" ]; then
 		if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 			set_default auth_cache 1
 			append bss_conf "rsn_preauth=1" "$N"
@@ -1189,6 +1252,8 @@ hostapd_set_bss_options() {
 		append bss_conf "per_sta_vif=$per_sta_vif" "$N"
 	fi
 
+	[ -n "$uci_section" ] && append bss_conf "uci_section=$uci_section" "$N"
+
 	if [ "$apup" -gt 0 ]; then
 		append bss_conf "apup=$apup" "$N"
 

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,14 +7,14 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+sercomm,ap72tip-v4|\
 sercomm,ap72tip)
+	ucidef_set_led_default "power" "POWER" "blue:status" "on"
 	ucidef_set_led_netdev "wan_link" "wan_link" "green:phy" "eth0" "link"
 	ucidef_set_led_netdev "wan_act" "wan_act" "yellow:phy" "eth0" "rx tx"
 	;;
-sonicfi,rap7110c-341x)
-	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
-	;;
-cig,wf189w)
+sonicfi,rap7110c-341x|\
+sonicfi,rap750w-311a)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
 esac

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -22,8 +22,16 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
-		ucidef_add_switch "switch1" "5u@eth0" "3:lan" "2:lan" "1:lan" "0u@eth1" "4:wan"
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan" "1:lan"
 		;;
+	cig,wf189h)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
+		;;
+	sercomm,ap72tip-v4)
+		ucidef_set_interface_wan "eth0"
+		;;	
 	esac
 }
 
@@ -32,6 +40,7 @@ qcom_setup_macs()
         local board="$1"
         case $board in
 	cig,wf189w|\
+	cig,wf189h|\
         cig,wf189)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
 		[ -z "$mtd" ] && return;
@@ -46,12 +55,30 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
                 ;;
+        sercomm,ap72tip)
+                wan_mac=$(cat /sys/class/net/eth0/address)
+                lan_mac=$(cat /sys/class/net/eth1/address)
+                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
+                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
+                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
+                ;;
         edgecore,eap105)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
-        sonicfi,rap7110c-341x|\
+        sonicfi,rap7110c-341x)
+                wan_mac=$(cat /sys/class/net/eth0/address)
+                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
+                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
+                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
+                ;;
         sonicfi,rap750w-311a)
+                wan_mac=$(cat /sys/class/net/eth0/address)
+                lan_mac=$(macaddr_add "$wan_mac" 1)
+                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
+                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
+                ;;
+        sercomm,ap72tip-v4)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -28,8 +28,10 @@ case "$FIRMWARE" in
 ath12k/IPQ5332/hw1.0/caldata.bin)
 	case "$board" in
 	cig,wf189w|\
+	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
+	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
@@ -45,6 +47,7 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
+	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;
@@ -56,12 +59,13 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 ath12k/QCN6432/hw1.0/caldata_1.bin)
 	case "$board" in
 	sonicfi,rap750w-311a)
-		caldata_extract "0:ART" 0x26800 0x18800
+		caldata_extract "0:ART" 0x12800 0x18800
 		;;
 	esac
 	;;
 ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
 	case "$board" in
+	cig,wf189h|\
 	cig,wf189w)
 		caldata_extract "0:ART" 0x26800 0x20000
 		;;
@@ -69,6 +73,7 @@ ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
 	;;
 ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
 	case "$board" in
+	cig,wf189h|\
 	cig,wf189w)
 		caldata_extract "0:ART" 0x58800 0x20000
 		;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/smp-affinity

@@ -0,0 +1,77 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	# For CE(assigned 2 core to copy engine)
+	# using 3 core will cause firmware crash due to bss channel survey timed out
+	i=0
+	cpu_mul=2
+	ce="ce"
+	ce1="ce_"
+	ce_name="$ce$i"
+	ce_name1="$ce1$i"
+	while [ $i -lt 15 ]
+	do
+		cpu=1
+		for irq_num in `grep -e "$ce_name" -e "$ce_name1" /proc/interrupts | cut -d ':' -f 1`
+		do
+			[ -n "$irq_num" ] && echo $cpu > /proc/irq/$irq_num/smp_affinity
+			cpu=$((cpu * cpu_mul))
+			if [ $cpu -gt 4 ] ; then cpu=1; fi
+		done
+	i=$((i+1))
+	ce_name="$ce$i"
+	ce_name1="$ce1$i"
+	done
+
+	#For IPQ5332 2G radio
+	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'reo2ost-exception' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'wbm2host-rx-release' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+	irq_affinity_num=`grep -E -m1 'reo2host-status' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+
+	# 5G and 6G radio
+	# pci0 and pci1 for Wkiki (two radio and one radio split mode)
+	# pcic1 and pcic2 are for Pebble
+	for j in pci0 pci1 pcic1 pcic2; do
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_4 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_5 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_6 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_7 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_0 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_1 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_2 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_11 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_3 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
+		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_8 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
+        done
+}

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -87,6 +87,7 @@ platform_do_upgrade() {
 	board=$(board_name)
 	case $board in
 	cig,wf189w|\
+	cig,wf189h|\
 	cig,wf189)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
@@ -119,5 +120,9 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
+	sercomm,ap72tip-v4|\
+	sercomm,ap72tip)
+		nand_upgrade_tar "$1"
+		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -23,6 +23,10 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
 	};
 
 	chosen {
@@ -40,9 +44,11 @@
 			uniphyaddr_fixup = <0xC90F014>;
 			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
 			tip,clk_div = <0xff>; /* MDIO Frequency reduction*/
+			limit_rtlphy_10g_ablity;
 
 			phy0: ethernet-phy@0 {
 				reg = <8>;
+				compatible ="ethernet-phy-ieee802.3-c45";
 			};
 
 			phy1: ethernet-phy@1 {
@@ -178,13 +184,26 @@
 			pinctrl-0 = <&gpio_leds_default>;
 			pinctrl-names = "default";
 
-			led-0 {
-				color = <LED_COLOR_ID_GREEN>;
-				function = LED_FUNCTION_WLAN;
-				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "phy0tx";
-				default-state = "off";
-			};
+		led_power_blue: led@26 {
+                        label = "status:blue";
+                        gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+			max-brightness = <160>;
+			linux,default-trigger = "none";
+                	};
+
+                led_power_green:led@30 {
+                        label = "status:green";
+                        gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			max-brightness = <160>;
+			linux,default-trigger = "none";
+                };
+
+                led_power_red:led@45 {
+                        label = "status:red";
+                        gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+			max-brightness = <160>;
+			linux,default-trigger = "none";
+                };
 		};
 
 		gpio_keys {
@@ -194,9 +213,9 @@
 			status = "okay";
 
 			button@1 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
@@ -462,7 +481,7 @@
 	};
 
 	button_pins: button-state {
-		pins = "gpio35";
+		pins = "gpio17";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -481,6 +500,24 @@
 		bias-pull-up;
 		output-low;
 	};
+
+	led_pins: led_pins {
+                mux_1 {
+                        pins = "gpio26";
+                        function = "gpio";
+                        drive-strength = <8>;
+                };
+                mux_2 {
+                        pins = "gpio30";
+                        function = "gpio";
+                        drive-strength = <8>;
+                };
+                mux_3 {
+                        pins = "gpio45";
+                        function = "gpio";
+                        drive-strength = <8>;
+                };
+        };
 };
 
 &license_manager {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -0,0 +1,777 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP446 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332-default-memory.dtsi"
+
+/ {
+	model = "CIG WF189H";
+	compatible = "cig,wf189h", "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332-rdp446", "qcom,ipq5332";
+
+	/*     1G  Layout for IPQ5332 + QCN6432 + QCN6432
+	 * +==========+==============+========================+
+	 * |         |              |                         |
+	 * |  Region | Start Offset |          Size           |
+	 * |         |              |                         |
+	 * +---------+--------------+-------------------------+
+	 * |   Q6    |              |                         |
+	 * |  code/  |  0x4A900000  |          25MB           |
+	 * |  data   |              |                         |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * |  data   |  0x4C200000  |          21MB           |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * | M3 Dump |  0x4D700000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * |  QDSS   |  0x4D800000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * |  CALDB  |  0x4D900000  |           5MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * |  data   |  0x4DE00000  |          21MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * | M3 Dump |  0x4F300000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * |  QDSS   |  0x4E400000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * |  CALDB  |  0x4F500000  |           5MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * |  data   |  0x4FA00000  |          21MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * | M3 Dump |  0x50F00000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * |  QDSS   |  0x51000000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * |  CALDB  |  0x51100000  |           5MB           |
+	 * +---------+--------------+-------------------------+
+	 * |         |              |                         |
+	 * |   MLO   |  0x51600000  |          12MB           |
+	 * +==================================================+
+	 * |                                                  |
+	 * |                                                  |
+	 * |                                                  |
+	 * |             Rest of memory for Linux             |
+	 * |                                                  |
+	 * |                                                  |
+	 * |                                                  |
+	 * +==================================================+
+	 */
+
+	reserved-memory {
+
+		/delete-node/ m3_dump@4cc00000;
+		/delete-node/ q6_etr_dump@1;
+		/delete-node/ mlo_global_mem_0@0x4db00000;
+		/delete-node/ wcnss@4a900000;
+		/delete-node/ q6_caldb_region@4ce00000;
+
+		q6_mem_regions: q6_mem_regions@4A900000  {
+			reg = <0x0 0x4a900000 0x0 0x6D00000>;
+			no-map;
+		};
+
+		q6_code_data: q6_code_data@4A900000 {
+			reg = <0x0 0x4a900000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
+			reg = <0x0 0x4C200000 0x0 0x1500000>;
+			no-map;
+		};
+
+		m3_dump: m3_dump@4D700000 {
+			reg = <0x0 0x4D700000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_etr_region: q6_etr_dump@4D800000 {
+			reg = <0x0 0x4D800000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
+			reg = <0x0 0x4D900000 0x0 0x500000>;
+			no-map;
+		};
+
+		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
+			reg = <0x0 0x4DE00000 0x0 0x1500000>;
+			no-map;
+		};
+
+		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+			no-map;
+                };
+
+		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
+			reg = <0x0 0x4F500000 0x0 0x500000>;
+			no-map;
+		};
+
+		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
+			reg = <0x0 0x4FA00000 0x0 0x1500000>;
+			no-map;
+		};
+
+		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
+			reg = <0x0 0x50F00000 0x0 0x100000>;
+			no-map;
+                };
+
+		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
+			reg = <0x0 0x51000000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
+			reg = <0x0 0x51100000 0x0 0x500000>;
+			no-map;
+		};
+
+		mlo_global_mem0: mlo_global_mem_0@51600000 {
+			reg = <0x0 0x51600000 0x0 0xC00000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &blsp1_uart0;
+		serial1 = &blsp1_uart1;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins &mdio0_pins>;
+			pinctrl-names = "default";
+			/*gpio51 for manhattan reset*/
+      phy-reset-gpio = <&tlmm 22 GPIO_ACTIVE_LOW>;
+			phyaddr_fixup = <0xC90F018>;
+			uniphyaddr_fixup = <0xC90F014>;
+			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+				fixup;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <2>;
+				fixup;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <3>;
+				fixup;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <4>;
+				fixup;
+			};
+
+			switch0@10 {
+				compatible = "qca,qca8386";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "cpu";
+						ethernet = <&gmac2>;
+						dsa-tag-protocol = "qca_4b";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+						phy-handle = <&phy0>;
+						phy-mode = "usxgmii";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+						phy-handle = <&phy1>;
+						phy-mode = "usxgmii";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan3";
+						phy-handle = <&phy2>;
+						phy-mode = "usxgmii";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan4";
+						phy-handle = <&phy3>;
+						phy-mode = "usxgmii";
+					};
+
+					port@5 {
+						reg = <5>;
+						forced-speed = <2500>;
+						forced-duplex = <1>;
+					}; 
+				};
+			};
+		};
+
+		pwmleds {
+			compatible = "pwm-leds";
+
+			led_power_red: red {
+				label = "pwm:red";
+				pwms = <&pwm 3 1250000>;
+				max-brightness = <160>;
+				linux,default-trigger = "none";
+			};
+
+			led_power_green: green {
+				label = "pwm:green";
+				pwms = <&pwm 2 1250000>;
+				max-brightness = <160>;
+				linux,default-trigger = "none";
+			};
+
+			led_power_blue: blue {
+				label = "pwm:blue";
+				pwms = <&pwm 1 1250000>;
+				max-brightness = <160>;
+				linux,default-trigger = "none";
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			button@1 {
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+
+			ess-switch@3a000000 {
+				pinctrl-names = "default";
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x2>; /* lan port bitmap */
+				switch_wan_bmp = <0x4>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						forced-speed = <2500>;
+						forced-duplex = <1>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <4>;
+					};
+				};
+			};
+
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca8386";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio>;
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
+				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+//				link-polling-required = <0>;
+				fdb_sync = "interrupt";
+				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <0>;
+						forced-speed = <2500>;
+						forced-duplex = <1>;
+					};
+					port@1 {
+						port_id = <1>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <2>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <3>;
+						phy_address = <3>;
+					};
+				};
+
+				led_source@2 {
+					source = <2>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@5 {
+					source = <5>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@8 {
+					source = <8>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@11 {
+					source = <11>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			qcom,mht-dev = <1>;
+			qcom,is_switch_connected = <1>;
+			qcom,ppe-offload-disabled = <1>;
+			phy-mode = "sgmii";
+		};
+
+		gmac2:dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,mht-dev = <1>;
+			qcom,is_switch_connected = <1>;
+			qcom,ppe-offload-disabled = <1>;
+		};
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
+					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
+					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
+					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
+					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
+					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;		/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
+				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
+				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
+				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
+				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
+				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
+				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
+				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
+				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
+				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
+				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
+				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
+				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
+				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
+				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
+				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
+				   <0 191 4>,			/* Misc error IRQ info */
+				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
+				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
+				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
+				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
+				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
+				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
+				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
+				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <3>;
+			status = "okay";
+			chip_info = <0 2 1 2>,
+				    <1 2 2 0>,
+				    <2 2 0 1>;
+		};
+
+		q6v5_wcss: remoteproc@d100000 {
+			boot-args = <0x1 0x4 0x3 0x1 0x2f 0x2>,
+					<0x1 0x4 0x4 0x2 0x2c 0x2>;
+			memory-region = <&q6_mem_regions>,
+					<&mlo_global_mem0>;
+
+			/delete-node/ remoteproc_pd1;
+			/delete-node/ remoteproc_pd2;
+			/delete-node/ remoteproc_pd3;
+
+			q6_wcss_pd4: remoteproc_pd4 {
+				compatible = "qcom,ipq5332-mpd-upd-text";
+				firmware = "IPQ5332/q6_fw4.mdt";
+
+				q6_wcss_pd1: remoteproc_pd1 {
+					compatible = "qcom,ipq5332-wcss-ahb-mpd";
+					firmware = "IPQ5332/q6_fw1.mdt";
+					m3_firmware = "IPQ5332/iu_fw.mdt";
+					interrupts-extended = <&wcss_smp2p_in 8 0>,
+							<&wcss_smp2p_in 9 0>,
+							<&wcss_smp2p_in 12 0>,
+							<&wcss_smp2p_in 11 0>;
+					interrupt-names = "fatal",
+							"ready",
+							"spawn-ack",
+							"stop-ack";
+
+					qcom,smem-states = <&wcss_smp2p_out 8>,
+							<&wcss_smp2p_out 9>,
+							<&wcss_smp2p_out 10>;
+					qcom,smem-state-names = "shutdown",
+								"stop",
+								"spawn";
+				};
+
+				q6_wcss_pd2: remoteproc_pd2 {
+					compatible = "qcom,ipq5332-wcss-pcie-mpd";
+					firmware = "IPQ5332/q6_fw2.mdt";
+					m3_firmware = "qcn6432/iu_fw.mdt";
+					interrupts-extended = <&wcss_smp2p_in 16 0>,
+							<&wcss_smp2p_in 17 0>,
+							<&wcss_smp2p_in 20 0>,
+							<&wcss_smp2p_in 19 0>;
+					interrupt-names = "fatal",
+							"ready",
+							"spawn-ack",
+							"stop-ack";
+
+					qcom,smem-states = <&wcss_smp2p_out 16>,
+							<&wcss_smp2p_out 17>,
+							<&wcss_smp2p_out 18>;
+					qcom,smem-state-names = "shutdown",
+								"stop",
+								"spawn";
+					status = "ok";
+				};
+
+				q6_wcss_pd3: remoteproc_pd3 {
+					compatible = "qcom,ipq5332-wcss-pcie-mpd";
+					firmware = "IPQ5332/q6_fw3.mdt";
+					interrupts-extended = <&wcss_smp2p_in 24 0>,
+							<&wcss_smp2p_in 25 0>,
+							<&wcss_smp2p_in 28 0>,
+							<&wcss_smp2p_in 27 0>;
+					interrupt-names = "fatal",
+							"ready",
+							"spawn-ack",
+							"stop-ack";
+
+					qcom,smem-states = <&wcss_smp2p_out 24>,
+							<&wcss_smp2p_out 25>,
+							<&wcss_smp2p_out 26>;
+					qcom,smem-state-names = "shutdown",
+								"stop",
+								"spawn";
+					status = "ok";
+				};
+			};
+		};
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&tlmm {
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	pwm_pins: pwm_pinmux {
+		/* PWM LED GREEN */
+		mux_1 {
+			pins = "gpio30";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+		/* PWM LED BLUE */
+		mux_2 {
+			pins = "gpio31";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+		/* PWM LED RED */
+		mux_3 {
+			pins = "gpio29";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux {
+		pins = "gpio33", "gpio34", "gpio35", "gpio36";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+
+	button_pins: button-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mdio1_pins: mdio1-state {
+		mux_0 {
+			pins = "gpio27";
+			function = "mdc1";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio28";
+			function = "mdio1";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&pwm {
+        pinctrl-0 = <&pwm_pins>;
+        used-pwm-indices = <1>, <1>, <0>, <1>;
+        pinctrl-names = "default";
+        status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&wifi0 {
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,tgt-mem-mode = <0>;
+	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
+	qcom,caldb-addr = <0x4D900000 0x4D900000 0x4D900000 0x0 0x0 0x0>;
+	qcom,caldb-size = <0x500000>;
+	qcom,board_id = <0x41>;
+	mem-region = <&q6_ipq5332_data>;
+	memory-region = <&q6_ipq5332_data>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	status = "okay";
+};
+
+&wifi1 {
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd2>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,tgt-mem-mode = <0>;
+	qcom,bdf-addr = <0x4DE00000 0x4DE00000 0x4DE00000 0x0 0x0 0x0>;
+	qcom,caldb-addr = <0x4F500000 0x4F500000 0x4F500000 0x0 0x0 0x0>;
+	qcom,umac-irq-reset-addr = <0x20000884>;
+	qcom,caldb-size = <0x500000>;
+	qcom,board_id = <0x061>;
+	mem-region = <&q6_qcn6432_data_1>;
+	memory-region = <&q6_qcn6432_data_1>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <1>;
+	status = "okay";
+	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "umac_reset";
+};
+
+&wifi2 {
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd3>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,tgt-mem-mode = <0>;
+	qcom,bdf-addr = <0x4FA00000 0x4FA00000 0x4FA00000 0x0 0x0 0x0>;
+	qcom,caldb-addr = <0x51100000 0x51100000 0x51100000 0x0 0x0 0x0>;
+	qcom,umac-irq-reset-addr = <0x18000884>;
+	qcom,caldb-size = <0x500000>;
+	qcom,board_id = <0x0b1>;
+	mem-region = <&q6_qcn6432_data_2>;
+	memory-region = <&q6_qcn6432_data_2>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <2>;
+	status = "okay";
+	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "umac_reset";
+};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -166,10 +166,10 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
 	};
 
 	chosen {
@@ -261,21 +261,21 @@
 		pwmleds {
 			compatible = "pwm-leds";
 
-			red {
+			led_power_red: red {
 				label = "pwm:red";
 				pwms = <&pwm 3 1250000>;
 				max-brightness = <160>;
 				linux,default-trigger = "none";
 			};
 
-			green {
+			led_power_green: green {
 				label = "pwm:green";
 				pwms = <&pwm 2 1250000>;
 				max-brightness = <160>;
 				linux,default-trigger = "none";
 			};
 
-			led_power: blue {
+			led_power_blue: blue {
 				label = "pwm:blue";
 				pwms = <&pwm 1 1250000>;
 				max-brightness = <160>;
@@ -307,7 +307,7 @@
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
 				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/
+				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
 				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
 
 				qcom,port_phyinfo {
@@ -318,8 +318,7 @@
 					};
 					port@1 {
 						port_id = <2>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
+						phy_address = <4>;
 					};
 				};
 			};
@@ -331,9 +330,9 @@
 				mdio-bus = <&mdio>;
 				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
 				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x21>;  /* cpu port bitmap */
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x10>;  /* wan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
 //				link-polling-required = <0>;
 				fdb_sync = "interrupt";
 				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
@@ -356,15 +355,6 @@
 						port_id = <3>;
 						phy_address = <3>;
 					};
-					port@4 {
-						port_id = <4>;
-						phy_address = <4>;
-					};
-					port@5 {
-						port_id = <5>;
-						forced-speed = <2500>;
-						forced-duplex = <1>; 
-					};
 				};
 
 				led_source@2 {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip-v4.dts

@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332.dtsi"
+#include "ipq5332-default-memory.dtsi"
+
+/ {
+	model = "Sercomm WiFi-7";
+	compatible = "sercomm,ap72tip-v4", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0; /*console*/
+		serial1 = &blsp1_uart1; /*ble*/
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+	
+#if 0   //AQR114C
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			phyaddr_fixup = <0xC90F018>;
+			uniphyaddr_fixup = <0xC90F014>;
+			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+
+			phy1: ethernet-phy@1 {   //aqr114c
+				reg = <0>;
+				compatible ="ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+					};
+					port@1 { //aqr114c
+						port_id = <2>;
+						phy_address = <0>;
+						mdiobus = <&mdio>;
+						ethernet-phy-ieee802.3-c45;
+					};
+				};
+			};
+		};
+		
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};	
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			qcom,phy-mdio-addr = <0>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+#else //SFP	
+		mdio:mdio@90000 { 
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			/*gpio0 for napa*/
+			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			status = "okay";
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <30>;
+						media-type = "sfp"; 
+					};
+				};
+			};
+		};
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <30>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+
+#endif
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
+					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
+					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
+					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
+					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
+					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;		/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
+				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
+				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
+				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
+				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
+				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
+				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
+				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
+				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
+				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
+				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
+				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
+				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
+				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
+				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
+				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
+				   <0 191 4>,			/* Misc error IRQ info */
+				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
+				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
+				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
+				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
+				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
+				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
+				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
+				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		leds {
+                compatible = "gpio-leds";
+
+				led@25 {
+					label = "blue:status";
+					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
+                    default-state = "off";
+                };
+				led@61 {
+					label = "green:phy";
+					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
+				};
+				led@62 {
+					label = "yellow:phy";
+					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
+				};
+		};
+		
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <2>;
+			status = "okay";
+			chip_info = <0 1 1>,
+				    <1 1 0>;
+		};
+	};
+};
+
+&wifi0 {
+//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	memory-region = <&q6_region>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	qcom,board_id = <0x16>;
+	status = "okay";
+};
+
+&qcn9224_pcie1 {
+	status = "okay";
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&blsp1_i2c2 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&blsp1_spi0 {   //nor flash
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "n25q128a11"; 
+		//, "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_spi1 {   /*tpm*/
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "okay";
+	
+	tpm: spi-tpm@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,st33htpm-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		status = "okay";
+	};
+};
+
+&pcm {
+	pinctrl-0 = <&audio_pins_pri>;
+	pinctrl-names = "primary";
+	status = "disabled";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&pcie1_phy_x2 {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie1_rp {
+		reg = <0 0 0 0 0>;
+
+		qcom,mhi@1 {
+			reg = <0 0 0 0 0>;
+			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
+					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
+					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
+			memory-region = <&qcn9224_pcie1>;
+			qcom,wsi = <&wsi>;
+			qcom,wsi_index = <1>;
+			qcom,board_id = <0x100f>;  //0x1019->0x100f
+		};
+	};
+};
+
+/* PINCTRL */
+
+&tlmm {
+
+	audio_pins_pri: audio_pinmux_pri {
+		mux_1 {
+			pins = "gpio29";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio30";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio31";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio32";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_0_pins: i2c-0-state {
+		pins = "gpio43", "gpio45";
+		function = "blsp2_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	spi_1_pins: spi-1-pins {  /* tpm */
+		pins = "gpio29", "gpio30", "gpio31", "gpio32";
+		function = "blsp1_spi0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux { /*ble*/
+//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
+		pins = "gpio33", "gpio35";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+/*	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};*/
+	
+	button_pins: button-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pwm_pins: pwm-state {
+		pins = "gpio46";
+		function = "pwm0";
+		drive-strength = <8>;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&ssuniphy_0 {
+	status = "okay";
+};
+
+//sercomm add
+&wifi3 {
+	/* QCN9224 5G+6G */
+	hremote_node = <&qcn9224_pcie1>;
+	qcom,board_id = <0x100f>; 
+	status = "okay";
+};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip.dts

@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332.dtsi"
+#include "ipq5332-default-memory.dtsi"
+
+/ {
+	model = "Sercomm WiFi-7";
+	compatible = "sercomm,ap72tip", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0; /*console*/
+		serial1 = &blsp1_uart1; /*ble*/
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+	
+#if 1   //AQR114C
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			phyaddr_fixup = <0xC90F018>;
+			uniphyaddr_fixup = <0xC90F014>;
+			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+
+			phy1: ethernet-phy@1 {   //aqr114c
+				reg = <0>;
+				compatible ="ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+					};
+					port@1 { //aqr114c
+						port_id = <2>;
+						phy_address = <0>;
+						mdiobus = <&mdio>;
+						ethernet-phy-ieee802.3-c45;
+					};
+				};
+			};
+		};
+		
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};	
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			qcom,phy-mdio-addr = <0>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+#else //SFP	
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <30>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+
+		mdio:mdio@90000 { 
+			status = "okay";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			/*gpio0 for napa*/
+			phy-reset-gpio = <&tlmm 0 0>;
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <30>;
+						media-type = "sfp"; 
+					};
+				};
+			};
+		};
+
+#endif
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
+					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
+					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
+					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
+					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
+					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;		/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
+				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
+				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
+				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
+				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
+				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
+				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
+				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
+				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
+				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
+				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
+				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
+				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
+				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
+				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
+				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
+				   <0 191 4>,			/* Misc error IRQ info */
+				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
+				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
+				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
+				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
+				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
+				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
+				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
+				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		leds {
+                compatible = "gpio-leds";
+
+				led@25 {
+					label = "blue:status";
+					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
+                    default-state = "off";
+                };
+				led@24 {
+					label = "red:status";
+					gpios = <&tca6416 10 GPIO_ACTIVE_HIGH>;
+				};
+				led_power: led@16 {
+                                label = "green:status";
+					gpios = <&tca6416 11 GPIO_ACTIVE_HIGH>;
+				};
+				led@61 {
+					label = "green:phy";
+					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
+				};
+				led@62 {
+					label = "yellow:phy";
+					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
+				};
+		};
+/*
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};*/
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <2>;
+			status = "okay";
+			chip_info = <0 1 1>,
+				    <1 1 0>;
+		};
+	};
+};
+
+&wifi0 {
+//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	memory-region = <&q6_region>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	qcom,board_id = <0x16>;
+	status = "okay";
+};
+
+&qcn9224_pcie1 {
+	status = "okay";
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&blsp1_i2c2 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&blsp1_spi0 {   //nor flash
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "n25q128a11"; 
+		//, "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_spi1 {   /*tpm*/
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "okay";
+	
+	tpm: spi-tpm@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,st33htpm-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		status = "okay";
+	};
+};
+
+&pcm {
+	pinctrl-0 = <&audio_pins_pri>;
+	pinctrl-names = "primary";
+	status = "disabled";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&pcie1_phy_x2 {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie1_rp {
+		reg = <0 0 0 0 0>;
+
+		qcom,mhi@1 {
+			reg = <0 0 0 0 0>;
+			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
+					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
+					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
+			memory-region = <&qcn9224_pcie1>;
+			qcom,wsi = <&wsi>;
+			qcom,wsi_index = <1>;
+			qcom,board_id = <0x100f>;  //0x1019->0x100f
+		};
+	};
+};
+
+/* PINCTRL */
+
+&tlmm {
+
+	audio_pins_pri: audio_pinmux_pri {
+		mux_1 {
+			pins = "gpio29";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio30";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio31";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio32";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_0_pins: i2c-0-state {
+		pins = "gpio43", "gpio45";
+		function = "blsp2_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	spi_1_pins: spi-1-pins {  /* tpm */
+		pins = "gpio29", "gpio30", "gpio31", "gpio32";
+		function = "blsp1_spi0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux { /*ble*/
+//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
+		pins = "gpio33", "gpio35";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+/*	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};*/
+/*
+	button_pins: button-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};*/
+
+	pwm_pins: pwm-state {
+		pins = "gpio46";
+		function = "pwm0";
+		drive-strength = <8>;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&ssuniphy_0 {
+	status = "okay";
+};
+
+//sercomm add
+&wifi3 {
+	/* QCN9224 5G+6G */
+	hremote_node = <&qcn9224_pcie1>;
+	qcom,board_id = <0x100f>; 
+	status = "okay";
+};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750w-311a.dts

@@ -242,6 +242,10 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -324,19 +328,6 @@
 			};
 		};
 
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&gpio_leds_default>;
-			pinctrl-names = "default";
-
-			led-0 {
-				color = <LED_COLOR_ID_GREEN>;
-				function = LED_FUNCTION_WLAN;
-				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "phy0tx";
-				default-state = "off";
-			};
-		};
 
 		gpio_keys {
 			compatible = "gpio-keys";
@@ -345,14 +336,39 @@
 			status = "okay";
 
 			button@1 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
 		};
 
+		pwmleds {
+			compatible = "pwm-leds";
+
+			red {
+				label = "pwm:red";
+				pwms = <&pwm 2 1250000>;
+				max-brightness = <1>;
+				linux,default-trigger = "none";
+			};
+		
+			green {
+				label = "pwm:green";
+				pwms = <&pwm 3 1250000>;
+				max-brightness = <1>;
+				linux,default-trigger = "none";
+			};
+		
+			led_power: blue {
+				label = "pwm:blue";
+				pwms = <&pwm 1 1250000>;
+				max-brightness = <1>;
+				linux,default-trigger = "none";
+			};
+		};
+
 		ess-instance {
 			num_devices = <0x2>;
 
@@ -411,34 +427,6 @@
 					};
 				};
 
-				led_source@2 {
-					source = <2>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@5 {
-					source = <5>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@8 {
-					source = <8>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@11 {
-					source = <11>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
 			};
 		};
 
@@ -549,7 +537,7 @@
 			memory-region = <&q6_mem_regions>;
 
 			q6_wcss_pd1: remoteproc_pd1 {
-				status = "ok";
+				status = "okay";
 			};
 
 			q6_wcss_pd2: remoteproc_pd2 {
@@ -570,7 +558,7 @@
 				qcom,smem-state-names = "shutdown",
 							"stop",
 							"spawn";
-				status = "ok";
+				status = "okay";
 			};
 		};
 	};
@@ -581,13 +569,13 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
-
+/*
 &blsp1_uart1 {
         pinctrl-0 = <&serial_1_pins>;
         pinctrl-names = "default";
         status = "disabled";
 };
-
+*/
 &blsp1_i2c1 {
 	clock-frequency  = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
@@ -664,29 +652,50 @@
 		};
 	};
 
+	pwm_pins: pwm_pinmux {
+			/* PWM LED GREEN */
+			mux_1 {
+				pins = "gpio43";
+				function = "pwm0";
+				drive-strength = <8>;
+			};
+			/* PWM LED BLUE */
+			mux_2 {
+				pins = "gpio45";
+				function = "pwm0";
+				drive-strength = <8>;
+			};
+			/* PWM LED RED */
+			mux_3 {
+				pins = "gpio44";
+				function = "pwm0";
+				drive-strength = <8>;
+			};
+	};
+/*
 	serial_1_pins: serial1-pinmux {
 		pins = "gpio33", "gpio34", "gpio35", "gpio36";
 		function = "blsp1_uart2";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-
+*/
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
 		function = "blsp1_i2c0";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-
+/*
 	gpio_leds_default: gpio-leds-default-state {
 		pins = "gpio36";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-down;
-	};
-
+	}; 
+*/
 	button_pins: button-state {
-		pins = "gpio35";
+		pins = "gpio24";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -725,6 +734,13 @@
 	status = "disabled";
 };
 
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	used-pwm-indices = <0>, <1>, <1>, <1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &hs_m31phy_0 {
 	status = "okay";
 };
@@ -747,7 +763,7 @@
 	memory-region = <&q6_ipq5332_data>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <0>;
-	status = "ok";
+	status = "okay";
 };
 
 &wifi1 {
@@ -768,7 +784,7 @@
 	memory-region = <&q6_qcn6432_data_1>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <1>;
-	status = "ok";
+	status = "okay";
 	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
 	interrupt-names = "umac_reset";
 };

feeds/qca-wifi-7/ipq53xx/dts/ipq5332.dtsi

@@ -736,6 +736,36 @@
 			status = "disabled";
 		};
 
+		blsp1_spi1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+		
+		blsp1_i2c2: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b7000 0x600>;
+			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency  = <400000>;
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		blsp1_i2c1: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x600>;

feeds/qca-wifi-7/ipq53xx/files-6.1/drivers/net/phy/rtk/rtk_phy.c

@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 
 #include "phy_rtl826xb_patch.h"
 #include "phy_rtl8251b_patch.h"
@@ -30,6 +31,7 @@ static int rtl8251_match_phy_device(struct phy_device *phydev)
 static int rtl826xb_get_features(struct phy_device *phydev)
 {
     int ret;
+    struct device_node *np;
     ret = genphy_c45_pma_read_abilities(phydev);
     if (ret)
         return ret;
@@ -48,6 +50,14 @@ static int rtl826xb_get_features(struct phy_device *phydev)
     linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
                        phydev->supported);
 
+    np = of_find_node_by_name(NULL, "mdio");
+    if (np)
+	if (of_property_read_bool(np, "limit_rtlphy_10g_ablity"))
+	{
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
+	}
+
+
     return 0;
 }
 
@@ -80,7 +90,6 @@ static int rtkphy_config_init(struct phy_device *phydev)
         case REALTEK_PHY_ID_RTL8261N:
         case REALTEK_PHY_ID_RTL8264B:
             phydev_info(phydev, "%s:%u [RTL8261N/RTL826XB] phy_id: 0x%X PHYAD:%d\n", __FUNCTION__, __LINE__, phydev->drv->phy_id, phydev->mdio.addr);
-	    phy_modify_mmd_changed(phydev, 7, 0x20, BIT(12), 0);
 
           #if 1 /* toggle reset */
             phy_modify_mmd_changed(phydev, 30, 0x145, BIT(0)  , 1);
@@ -213,7 +222,6 @@ static int rtkphy_c45_aneg_done(struct phy_device *phydev)
 static int rtkphy_c45_read_status(struct phy_device *phydev)
 {
     int ret = 0, status = 0;
-    uint16_t local;
     phydev->speed = SPEED_UNKNOWN;
     phydev->duplex = DUPLEX_UNKNOWN;
     phydev->pause = 0;
@@ -232,9 +240,6 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
         if (ret)
             return ret;
 	
-	phy_write_mmd(phydev, 7, 0x20, 0x181);
-	local = phy_read_mmd(phydev, 7, 0x20);
-
         status =  phy_read_mmd(phydev, 31, 0xA414);
         if (status < 0)
             return status;
@@ -242,11 +247,6 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
             phydev->lp_advertising, status & BIT(11));
 
         phy_resolve_aneg_linkmode(phydev);
-	if((phydev->speed == 10000) && (local == 0x181))
-        {
-                phydev->speed = 5000;
-                phydev->duplex = DUPLEX_FULL;
-        }
     }
     else
     {

feeds/qca-wifi-7/ipq53xx/generic/config-6.1-platform

@@ -2288,7 +2288,7 @@ CONFIG_GPIOLIB_FASTPATH_LIMIT=512
 # CONFIG_GPIO_ML_IOH is not set
 # CONFIG_GPIO_MOCKUP is not set
 # CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCA953X=y
 # CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCA9570 is not set
 # CONFIG_GPIO_PCF857X is not set

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -14,16 +14,30 @@ endef
 TARGET_DEVICES += cig_wf189
 
 define Device/sercomm_ap72tip
-  DEVICE_TITLE := Sercomm AP72 TIP
+  DEVICE_TITLE := Sercomm AP72TIP
   DEVICE_DTS := ipq5332-sercomm-ap72tip
-  DEVICE_DTS_CONFIG := config@mi01.2-qcn9160-c1
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi01.6
   IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
   DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
 endef
-#TARGET_DEVICES += sercomm_ap72tip
+TARGET_DEVICES += sercomm_ap72tip
+
+define Device/sercomm_ap72tip-v4
+  DEVICE_TITLE := Sercomm AP72TIP-v4
+  DEVICE_DTS := ipq5332-sercomm-ap72tip-v4
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi01.6
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi
+  DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip-v4 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
+endef
+TARGET_DEVICES += sercomm_ap72tip-v4
 
 define Device/edgecore_eap105
   DEVICE_TITLE := Edgecore EAP105
@@ -61,7 +75,7 @@ define Device/sonicfi_rap750w_311a
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb
+  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb -ath12k-firmware-qcn92xx
 endef
 TARGET_DEVICES += sonicfi_rap750w_311a
 
@@ -77,3 +91,17 @@ define Device/cig_wf189w
   DEVICE_PACKAGES := ath12k-wifi-cig-wf189w ath12k-firmware-ipq5332-peb-peb
 endef
 TARGET_DEVICES += cig_wf189w
+
+
+define Device/cig_wf189h
+  DEVICE_TITLE := CIG WF189H
+  DEVICE_DTS := ipq5332-cig-wf189h
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi04.1
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi
+  DEVICE_PACKAGES := ath12k-wifi-cig-wf189h ath12k-firmware-ipq5332-peb-peb
+endef
+TARGET_DEVICES += cig_wf189h

feeds/qca-wifi-7/qca-ssdk-qca/patches/0006-qca-ssdk-Fix-10G-rtl-phy-driver-for-c45-mdio-read-wr.patch

@@ -0,0 +1,116 @@
+From 85a7c62d4e3385de1a379959dd45148cfdc95b3b Mon Sep 17 00:00:00 2001
+From: huangyunxiang <huangyunxiang@cigtech.com>
+Date: Tue, 29 Apr 2025 09:56:28 +0800
+Subject: [PATCH] qca-ssdk modify rtl826x phy mdio read/write as c45 mode and
+ clear 10G ablity
+
+---
+ src/hsl/phy/rtl826xb_phy.c                | 55 ++++++-------------
+ 1 file changed, 17 insertions(+), 38 deletions(-)
+
+diff --git a/src/hsl/phy/rtl826xb_phy.c b/src/hsl/phy/rtl826xb_phy.c
+index a336348aa9..9a67b45948 100644
+--- a/src/hsl/phy/rtl826xb_phy.c
++++ b/src/hsl/phy/rtl826xb_phy.c
+@@ -48,46 +48,39 @@ void rtl826xb_phy_lock_init(void)
+ 
+ static a_uint16_t rtl826x_phy_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
+-
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
++	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, reg_mmd, reg_id);
+ }
+ 
+ 
+ static sw_error_t rtl826x_phy_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id, a_uint16_t reg_val)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
+-
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, reg_val);
++	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, reg_mmd, reg_id, reg_val);
+ }
+ 
+ 
+ static a_uint16_t rtl826x_phy_reg_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg)
+ {
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg);
++	return hsl_phy_mii_reg_read(dev_id, phy_id, reg);
+ }
+ 
+ 
+ static sw_error_t rtl826x_phy_reg_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg, a_uint16_t reg_val)
+ {
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
++
++	return hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
+ }
+ 
+ 
+ static a_int16_t hal_miim_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
+-
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
++	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg);
+ }
+ 
+ 
+ 
+ static a_int32_t hal_miim_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg, a_uint16_t phy_data)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
+-
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, phy_data);
++	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg, phy_data);
+ }
+ 
+ 
+@@ -1281,34 +1274,20 @@ phy_826xb_autoNegoAbility_set(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t a
+ 	hsl_phy_phydev_autoneg_update(dev_id, phy_id, A_TRUE, autoneg);
+ 	
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 16);
++	phyData &= (~(0x0020 | 0x0040 | FAL_PHY_ADV_100TX_HD | FAL_PHY_ADV_100TX_FD | FAL_PHY_ADV_PAUSE | FAL_PHY_ADV_ASY_PAUSE));
++	phyData |= (autoneg & FAL_PHY_ADV_100TX_HD) ? (FAL_PHY_ADV_100TX_HD) : (0);
++	phyData |= ((autoneg & FAL_PHY_ADV_100TX_FD)) ? (FAL_PHY_ADV_100TX_FD) : (0);
+ 
+-    phyData &= (~(0x0020 | 0x0040 | 0x0080 | 0x0100 | 0x0400 | 0x0800));
+-	phyData |= ((autoneg & 1 << 1)) ? (0x0040) : (0);
+-    phyData |= ((autoneg & 1 << 2)) ? (0x0080) : (0);
+-    phyData |= ((autoneg & 1 << 3)) ? (0x0100) : (0);
+-	phyData |= ((autoneg & 1 << 4)) ? (0x0400) : (0);
+-	phyData |= ((autoneg & 1 << 5)) ? (0x0800) : (0);
+-//    phyData |= ((autoneg & 1 << 9)) ? (0x0400) : (0);
+-//    phyData |= ((autoneg & 1 << 10)) ? (0x0800) : (0);
+-
+-    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
+-	
++	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 32);
++	phyData &= (~(FAL_PHY_ADV_2500T_FD | FAL_PHY_ADV_5000T_FD | FAL_PHY_ADV_10000T_FD));
++	phyData |= (autoneg & FAL_PHY_ADV_2500T_FD) ? (FAL_PHY_ADV_2500T_FD) : (0);
++	phyData |= (autoneg & FAL_PHY_ADV_5000T_FD) ? (FAL_PHY_ADV_5000T_FD) : (0);
+ 
+-    phyData &= (~(0x4000 | 0x2000 | 0x1000));
+-    phyData |= (autoneg & 1 << 12) ? (0x0080) : (0);
+-    phyData |= (autoneg & 1 << 13) ? (0x0100) : (0);
+-    phyData |= (autoneg & 1 << 14) ? (0x1000) : (0);
+-
+-    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
+-     
+-	
++	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_VEND2, 0xA412);
+-
+-
+-    phyData &= (~(0x0100 | 0x0200));
+-    phyData |= (autoneg & 1 << 9) ? (0x0200) : (0);
+-//    phyData |= (autoneg & 1 << 5) ? (0x0200) : (0);
++	phyData &= (~(0x0100 | FAL_PHY_ADV_1000T_FD));
++	phyData |= (autoneg & FAL_PHY_ADV_1000T_FD) ? (FAL_PHY_ADV_1000T_FD) : (0);
+ 
+     phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_VEND2, 0xA412, phyData);
+         
+-- 
+2.34.1
+

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -79,6 +79,8 @@ hfcl,ion4xe)
 	;;
 cig,wf186w|\
 cig,wf189|\
+cig,wf189w|\
+cig,wf189h|\
 cig,wf186h|\
 yuncore,ax840|\
 yuncore,fap655)
@@ -86,6 +88,7 @@ yuncore,fap655)
 	;;
 senao,iap2300m|\
 senao,iap4300m|\
+emplus,wap588m|\
 senao,jeap6500)
 	PART_NAME=ubi
 	;;

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,8 +6,8 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
-	rm -rf /tmp/threshold_breach_count_phy*
-	rm -rf /tmp/fixed_channel_phy*
+	rm -rf /tmp/threshold_breach_count*
+	rm -rf /tmp/fixed_channel*
 
 	procd_open_instance
 	procd_set_param command /usr/bin/rrmd.uc

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -265,7 +265,7 @@ function dfs_chan_check(iface_num, rcs_channel) {
 }
 
 function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f, fixed_chan_bkp, channel_config) {
-    // if fixed channel config is stored in the /tmp/fixed_channel_phyX file
+    // if fixed channel config is stored in the /tmp/fixed_channel_<radio_iface> file
     if (fixed_channel_f == 1) {
         if (auto_channel_f == 1) {
             // if current channel is auto => change to fixed
@@ -290,6 +290,7 @@ function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f,
 function get_chan_util(radio_band, sleep_time) {
 	let pdev_stats = {};
 	let chan_util = 0;
+    let total_usage = 0;
 
     let prev_values = {
 		txFrameCount: null,
@@ -348,7 +349,8 @@ function get_chan_util(radio_band, sleep_time) {
             if (ignore != 1) {
                 let cycle_count_delta = curr_values.cycleCount - prev_values.cycleCount;
                 let rx_clear_delta = curr_values.rxClearCount - prev_values.rxClearCount;
-                let total_usage = (rx_clear_delta * 100) / cycle_count_delta;
+                if (cycle_count_delta && cycle_count_delta > 0)
+                    total_usage = (rx_clear_delta * 100) / cycle_count_delta;
                 chan_util = total_usage;
             }
 
@@ -673,7 +675,7 @@ function channel_optimize() {
                 ulog_info(`[%s] Allowed consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], config.consecutive_threshold_breach);
 
                 if (!current_threshold_breach_count || current_threshold_breach_count == null || current_threshold_breach_count == 'NaN') {
-                    // /tmp/phyX_breachcount file doesn't exist yet or has invalid value
+                    // /tmp/threshold_breach_count_<radio_iface> file doesn't exist yet or has invalid value
                     current_threshold_breach_count = 0;
                 }
                 ulog_info(`[%s] Previous consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], current_threshold_breach_count);

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=fe33f072d7bcbbb14c7c3415e0750699bb5dae8a9af06c59c90c020f8b192a15
+PKG_MIRROR_HASH:=febaed92efb6e863101604a9cd43ca5ac004832ad9592e727f02c6bc0f718655
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=5a6d23b76bc51289ae99d22fdf406516b0c630e6
+PKG_SOURCE_VERSION:=3b88fc15dfeaafa7dfa49a9efcd99a5b938e15c6
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/udhcpinject/files/etc/config/dhcpinject

@@ -5,3 +5,6 @@
 #   list ssid 'EAP101-ERICHI'
 #   list ssid 'EAP101-AKIHO'
 #   list ssid 'EAP101-DAMAYU'
+#
+# config dhcpinject 'dhcpinject'
+#   option iface_count '6'

feeds/ucentral/udhcpinject/files/etc/init.d/dhcpinject

@@ -9,9 +9,9 @@ SERVICE_NAME="dhcpinject"
 PROG=/usr/bin/udhcpinject
 
 start_service() {
-    local ssid_list=""
     local ssids=""
     local ports=""
+    local ifaces=""
 
     # Function to process each ssid
     append_ssid() {
@@ -40,6 +40,9 @@ start_service() {
 
     # Get the list of ports
     config_list_foreach uplink port append_port
+
+    # Get the iface_count
+    config_get ifaces dhcpinject iface_count
     
     # Fallback to eth0 if no ports are specified
     if [ -z "$ports" ]; then
@@ -47,11 +50,11 @@ start_service() {
     fi
 
     # Optional: Log or echo for debugging
-    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports"
+    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports, IFACEs=$ifaces"
 
     procd_open_instance "$SERVICE_NAME"
     procd_set_param command $PROG
-    procd_set_param env SSIDs="$ssids" PORTs="$ports"
+    procd_set_param env SSIDs="$ssids" PORTs="$ports" IFACEs="$ifaces"
     procd_set_param respawn 3600 10 10
     procd_set_param file /etc/config/dhcpinject
     procd_set_param reload_signal SIGHUP

feeds/ucentral/udhcpinject/src/udhcpinject.c

@@ -26,6 +26,7 @@ struct iface_info *iface_map = NULL;
 static struct port_info *ports = NULL;
 int iface_count = 0;
 int port_count = 0;
+int total_iface = 0;
 static pcap_t *handle = NULL;
 static char *provided_ssids = NULL;
 static char *provided_ports = NULL;
@@ -192,6 +193,11 @@ int parse_ssids(const char *ssids) {
         return -1;
     }
 
+    if (iface_count != total_iface) {
+        syslog(LOG_ERR, "Expect %d but only %d interfaces were found.\n", total_iface, iface_count);
+        return -1;
+    }
+
     syslog(LOG_INFO, "Found %d matching interfaces\n", iface_count);
     return 0;
 }
@@ -310,7 +316,6 @@ void signal_handler(int sig) {
         exit(0);
     } else if (sig == SIGHUP) {
         syslog(LOG_INFO, "Received reload signal, reconfiguring...\n");
-        sleep(5);
         // Clean up existing resources
         cleanup_tc();
         
@@ -561,7 +566,19 @@ int main(int argc, char *argv[]) {
     signal(SIGTERM, signal_handler);
     signal(SIGHUP, signal_handler);
 
-    sleep(5);
+    // Read IFACEs from environment variable
+    char *iface_env = getenv("IFACEs");
+    if (!iface_env) {
+        syslog(LOG_ERR, "No IFACEs provided. Exiting...\n");
+        cleanup();
+        return 1;
+    }
+    total_iface = atoi(iface_env);
+    if (total_iface <= 0) {
+        syslog(LOG_ERR, "Invalid IFACEs value: %s. Exiting...\n", iface_env);
+        cleanup();
+        return 1;
+    }
 
     provided_ssids = getenv("SSIDs");
     syslog(LOG_INFO, "Provided SSIDs: %s\n", provided_ssids);
@@ -618,4 +635,4 @@ int main(int argc, char *argv[]) {
 
     cleanup();
     return 0;
-}
+}

profiles/cig_wf189.yml

@@ -12,3 +12,4 @@ include:
 packages:
   - ipq53xx
   - ftm
+  - qca-ssdk-shell

profiles/cig_wf189h.yml

@@ -0,0 +1,14 @@
+---
+profile: cig_wf189h
+target: ipq53xx
+subtarget: generic
+description: Build image for the CIG WF189h
+image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-cig_wf189h-squashfs-sysupgrade.tar
+feeds:
+  - name: qca
+    path: ../../feeds/qca-wifi-7
+include:
+  - ucentral-ap
+packages:
+  - ipq53xx
+  - qca-ssdk-shell

profiles/emplus_wap588m.yml

@@ -0,0 +1,942 @@
+---
+profile: emplus_wap588m
+target: mediatek
+subtarget: mt7981
+description: Build image for the EMPLUS WAP588M
+image: bin/targets/mediatek/mt7981/openwrt-mediatek-mt7981-emplus_wap588m-squashfs-sysupgrade.bin
+feeds:
+  - name: mediatek
+    path: ../../feeds/mediatek-sdk
+packages:
+  - mediatek
+include:
+  - ucentral-ap
+diffconfig: |
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_DEFAULT_HAVE_DOT_CONFIG=y
+  # CONFIG_BUSYBOX_DEFAULT_DESKTOP is not set
+  # CONFIG_BUSYBOX_DEFAULT_EXTRA_COMPAT is not set
+  CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0
+  # CONFIG_BUSYBOX_DEFAULT_FEATURE_IPC_SYSLOG is not set
+  CONFIG_BUSYBOX_DEFAULT_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0
+  # CONFIG_BUSYBOX_DEFAULT_FEATURE_KMSG_SYSLOG is not set
+  CONFIG_BUSYBOX_CONFIG_HAVE_DOT_CONFIG=y
+  
+  #
+  # Settings
+  #
+  # CONFIG_BUSYBOX_CONFIG_DESKTOP is not set
+  # CONFIG_BUSYBOX_CONFIG_EXTRA_COMPAT is not set
+  # CONFIG_BUSYBOX_CONFIG_FEDORA_COMPAT is not set
+  CONFIG_BUSYBOX_CONFIG_INCLUDE_SUSv2=y
+  CONFIG_BUSYBOX_CONFIG_LONG_OPTS=y
+  CONFIG_BUSYBOX_CONFIG_SHOW_USAGE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE is not set
+  CONFIG_BUSYBOX_CONFIG_LFS=y
+  # CONFIG_BUSYBOX_CONFIG_PAM is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DEVPTS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_UTMP is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_PIDFILE=y
+  CONFIG_BUSYBOX_CONFIG_PID_FILE_PATH="/var/run"
+  # CONFIG_BUSYBOX_CONFIG_BUSYBOX is not set
+  # CONFIG_BUSYBOX_CONFIG_INSTALL_NO_USR is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SUID is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS=y
+  CONFIG_BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+  # CONFIG_BUSYBOX_CONFIG_SELINUX is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CLEAN_UP is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SYSLOG_INFO is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SYSLOG=y
+  
+  #
+  # Build Options
+  #
+  # CONFIG_BUSYBOX_CONFIG_STATIC is not set
+  # CONFIG_BUSYBOX_CONFIG_PIE is not set
+  # CONFIG_BUSYBOX_CONFIG_NOMMU is not set
+  CONFIG_BUSYBOX_CONFIG_CROSS_COMPILER_PREFIX=""
+  CONFIG_BUSYBOX_CONFIG_SYSROOT=""
+  CONFIG_BUSYBOX_CONFIG_EXTRA_CFLAGS=""
+  CONFIG_BUSYBOX_CONFIG_EXTRA_LDFLAGS=""
+  CONFIG_BUSYBOX_CONFIG_EXTRA_LDLIBS=""
+  # CONFIG_BUSYBOX_CONFIG_USE_PORTABLE_CODE is not set
+  # CONFIG_BUSYBOX_CONFIG_STACK_OPTIMIZATION_386 is not set
+  # CONFIG_BUSYBOX_CONFIG_STATIC_LIBGCC is not set
+  
+  #
+  # Installation Options ("make install" behavior)
+  #
+  CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS=y
+  # CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS is not set
+  # CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+  # CONFIG_BUSYBOX_CONFIG_INSTALL_APPLET_DONT is not set
+  CONFIG_BUSYBOX_CONFIG_PREFIX="./_install"
+  
+  #
+  # Debugging Options
+  #
+  # CONFIG_BUSYBOX_CONFIG_DEBUG is not set
+  # CONFIG_BUSYBOX_CONFIG_DEBUG_SANITIZE is not set
+  # CONFIG_BUSYBOX_CONFIG_UNIT_TEST is not set
+  # CONFIG_BUSYBOX_CONFIG_WERROR is not set
+  # CONFIG_BUSYBOX_CONFIG_WARN_SIMPLE_MSG is not set
+  CONFIG_BUSYBOX_CONFIG_NO_DEBUG_LIB=y
+  # CONFIG_BUSYBOX_CONFIG_DMALLOC is not set
+  # CONFIG_BUSYBOX_CONFIG_EFENCE is not set
+  
+  #
+  # Library Tuning
+  #
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_USE_BSS_TAIL is not set
+  # CONFIG_BUSYBOX_CONFIG_FLOAT_DURATION is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_RTMINMAX is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+  CONFIG_BUSYBOX_CONFIG_PASSWORD_MINLEN=6
+  CONFIG_BUSYBOX_CONFIG_MD5_SMALL=1
+  CONFIG_BUSYBOX_CONFIG_SHA1_SMALL=3
+  CONFIG_BUSYBOX_CONFIG_SHA1_HWACCEL=y
+  CONFIG_BUSYBOX_CONFIG_SHA256_HWACCEL=y
+  CONFIG_BUSYBOX_CONFIG_SHA3_SMALL=1
+  CONFIG_BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_USE_SENDFILE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_COPYBUF_KB=4
+  CONFIG_BUSYBOX_CONFIG_MONOTONIC_SYSCALL=y
+  CONFIG_BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN=512
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_VI is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY=256
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_WINCH is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set
+  # CONFIG_BUSYBOX_CONFIG_LOCALE_SUPPORT is not set
+  # CONFIG_BUSYBOX_CONFIG_UNICODE_SUPPORT is not set
+  # CONFIG_BUSYBOX_CONFIG_LOOP_CONFIGURE is not set
+  # CONFIG_BUSYBOX_CONFIG_NO_LOOP_CONFIGURE is not set
+  CONFIG_BUSYBOX_CONFIG_TRY_LOOP_CONFIGURE=y
+  # end of Settings
+  
+  #
+  # Applets
+  #
+  
+  #
+  # Archival Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z is not set
+  # CONFIG_BUSYBOX_CONFIG_AR is not set
+  # CONFIG_BUSYBOX_CONFIG_UNCOMPRESS is not set
+  CONFIG_BUSYBOX_CONFIG_GUNZIP=y
+  CONFIG_BUSYBOX_CONFIG_ZCAT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_GUNZIP_LONG_OPTIONS is not set
+  # CONFIG_BUSYBOX_CONFIG_BUNZIP2 is not set
+  # CONFIG_BUSYBOX_CONFIG_BZCAT is not set
+  # CONFIG_BUSYBOX_CONFIG_UNLZMA is not set
+  # CONFIG_BUSYBOX_CONFIG_LZCAT is not set
+  # CONFIG_BUSYBOX_CONFIG_LZMA is not set
+  # CONFIG_BUSYBOX_CONFIG_UNXZ is not set
+  # CONFIG_BUSYBOX_CONFIG_XZCAT is not set
+  # CONFIG_BUSYBOX_CONFIG_XZ is not set
+  # CONFIG_BUSYBOX_CONFIG_BZIP2 is not set
+  # CONFIG_BUSYBOX_CONFIG_CPIO is not set
+  # CONFIG_BUSYBOX_CONFIG_DPKG is not set
+  # CONFIG_BUSYBOX_CONFIG_DPKG_DEB is not set
+  CONFIG_BUSYBOX_CONFIG_GZIP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
+  CONFIG_BUSYBOX_CONFIG_GZIP_FAST=0
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS=y
+  # CONFIG_BUSYBOX_CONFIG_LZOP is not set
+  # CONFIG_BUSYBOX_CONFIG_UNLZOP is not set
+  # CONFIG_BUSYBOX_CONFIG_LZOPCAT is not set
+  # CONFIG_BUSYBOX_CONFIG_RPM is not set
+  # CONFIG_BUSYBOX_CONFIG_RPM2CPIO is not set
+  CONFIG_BUSYBOX_CONFIG_TAR=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_CREATE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_AUTODETECT is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_FROM=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_UNAME_GNAME is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TAR_NOPRESERVE_TIME is not set
+  # CONFIG_BUSYBOX_CONFIG_UNZIP is not set
+  # end of Archival Utilities
+  
+  #
+  # Coreutils
+  #
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_VERBOSE is not set
+  
+  #
+  # Common options for date and touch
+  #
+  
+  #
+  # Common options for cp and mv
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+  
+  #
+  # Common options for df, du, ls
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE=y
+  CONFIG_BUSYBOX_CONFIG_BASENAME=y
+  CONFIG_BUSYBOX_CONFIG_CAT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CATN is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CATV is not set
+  CONFIG_BUSYBOX_CONFIG_CHGRP=y
+  CONFIG_BUSYBOX_CONFIG_CHMOD=y
+  CONFIG_BUSYBOX_CONFIG_CHOWN=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
+  CONFIG_BUSYBOX_CONFIG_CHROOT=y
+  # CONFIG_BUSYBOX_CONFIG_CKSUM is not set
+  # CONFIG_BUSYBOX_CONFIG_CRC32 is not set
+  # CONFIG_BUSYBOX_CONFIG_COMM is not set
+  CONFIG_BUSYBOX_CONFIG_CP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CP_LONG_OPTIONS is not set
+  CONFIG_BUSYBOX_CONFIG_CUT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CUT_REGEX is not set
+  CONFIG_BUSYBOX_CONFIG_DATE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DATE_ISOFMT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_DATE_NANO is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_DATE_COMPAT is not set
+  CONFIG_BUSYBOX_CONFIG_DD=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_DD_STATUS is not set
+  CONFIG_BUSYBOX_CONFIG_DF=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_DF_FANCY is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS is not set
+  CONFIG_BUSYBOX_CONFIG_DIRNAME=y
+  # CONFIG_BUSYBOX_CONFIG_DOS2UNIX is not set
+  # CONFIG_BUSYBOX_CONFIG_UNIX2DOS is not set
+  CONFIG_BUSYBOX_CONFIG_DU=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+  CONFIG_BUSYBOX_CONFIG_ECHO=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_ECHO=y
+  CONFIG_BUSYBOX_CONFIG_ENV=y
+  # CONFIG_BUSYBOX_CONFIG_EXPAND is not set
+  # CONFIG_BUSYBOX_CONFIG_UNEXPAND is not set
+  CONFIG_BUSYBOX_CONFIG_EXPR=y
+  CONFIG_BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64=y
+  # CONFIG_BUSYBOX_CONFIG_FACTOR is not set
+  CONFIG_BUSYBOX_CONFIG_FALSE=y
+  # CONFIG_BUSYBOX_CONFIG_FOLD is not set
+  CONFIG_BUSYBOX_CONFIG_HEAD=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_HEAD=y
+  # CONFIG_BUSYBOX_CONFIG_HOSTID is not set
+  CONFIG_BUSYBOX_CONFIG_ID=y
+  # CONFIG_BUSYBOX_CONFIG_GROUPS is not set
+  # CONFIG_BUSYBOX_CONFIG_INSTALL is not set
+  # CONFIG_BUSYBOX_CONFIG_LINK is not set
+  CONFIG_BUSYBOX_CONFIG_LN=y
+  # CONFIG_BUSYBOX_CONFIG_LOGNAME is not set
+  CONFIG_BUSYBOX_CONFIG_LS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_FILETYPES=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_FOLLOWLINKS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_RECURSIVE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_WIDTH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_SORTFILES=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_TIMESTAMPS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_USERNAME=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_COLOR=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+  CONFIG_BUSYBOX_CONFIG_MD5SUM=y
+  # CONFIG_BUSYBOX_CONFIG_SHA1SUM is not set
+  CONFIG_BUSYBOX_CONFIG_SHA256SUM=y
+  # CONFIG_BUSYBOX_CONFIG_SHA512SUM is not set
+  # CONFIG_BUSYBOX_CONFIG_SHA3SUM is not set
+  
+  #
+  # Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+  CONFIG_BUSYBOX_CONFIG_MKDIR=y
+  CONFIG_BUSYBOX_CONFIG_MKFIFO=y
+  CONFIG_BUSYBOX_CONFIG_MKNOD=y
+  CONFIG_BUSYBOX_CONFIG_MKTEMP=y
+  CONFIG_BUSYBOX_CONFIG_MV=y
+  CONFIG_BUSYBOX_CONFIG_NICE=y
+  # CONFIG_BUSYBOX_CONFIG_NL is not set
+  # CONFIG_BUSYBOX_CONFIG_NOHUP is not set
+  # CONFIG_BUSYBOX_CONFIG_NPROC is not set
+  # CONFIG_BUSYBOX_CONFIG_OD is not set
+  # CONFIG_BUSYBOX_CONFIG_PASTE is not set
+  # CONFIG_BUSYBOX_CONFIG_PRINTENV is not set
+  CONFIG_BUSYBOX_CONFIG_PRINTF=y
+  CONFIG_BUSYBOX_CONFIG_PWD=y
+  CONFIG_BUSYBOX_CONFIG_READLINK=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW=y
+  # CONFIG_BUSYBOX_CONFIG_REALPATH is not set
+  CONFIG_BUSYBOX_CONFIG_RM=y
+  CONFIG_BUSYBOX_CONFIG_RMDIR=y
+  CONFIG_BUSYBOX_CONFIG_SEQ=y
+  # CONFIG_BUSYBOX_CONFIG_SHRED is not set
+  # CONFIG_BUSYBOX_CONFIG_SHUF is not set
+  CONFIG_BUSYBOX_CONFIG_SLEEP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP=y
+  CONFIG_BUSYBOX_CONFIG_SORT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SORT_BIG is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SORT_OPTIMIZE_MEMORY is not set
+  # CONFIG_BUSYBOX_CONFIG_SPLIT is not set
+  # CONFIG_BUSYBOX_CONFIG_STAT is not set
+  # CONFIG_BUSYBOX_CONFIG_STTY is not set
+  # CONFIG_BUSYBOX_CONFIG_SUM is not set
+  CONFIG_BUSYBOX_CONFIG_SYNC=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SYNC_FANCY is not set
+  CONFIG_BUSYBOX_CONFIG_FSYNC=y
+  # CONFIG_BUSYBOX_CONFIG_TAC is not set
+  CONFIG_BUSYBOX_CONFIG_TAIL=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_TAIL=y
+  CONFIG_BUSYBOX_CONFIG_TEE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+  CONFIG_BUSYBOX_CONFIG_TEST=y
+  CONFIG_BUSYBOX_CONFIG_TEST1=y
+  CONFIG_BUSYBOX_CONFIG_TEST2=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TEST_64=y
+  # CONFIG_BUSYBOX_CONFIG_TIMEOUT is not set
+  CONFIG_BUSYBOX_CONFIG_TOUCH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TOUCH_SUSV3=y
+  CONFIG_BUSYBOX_CONFIG_TR=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TR_CLASSES is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TR_EQUIV is not set
+  CONFIG_BUSYBOX_CONFIG_TRUE=y
+  # CONFIG_BUSYBOX_CONFIG_TRUNCATE is not set
+  # CONFIG_BUSYBOX_CONFIG_TSORT is not set
+  # CONFIG_BUSYBOX_CONFIG_TTY is not set
+  CONFIG_BUSYBOX_CONFIG_UNAME=y
+  CONFIG_BUSYBOX_CONFIG_UNAME_OSNAME="GNU/Linux"
+  # CONFIG_BUSYBOX_CONFIG_BB_ARCH is not set
+  CONFIG_BUSYBOX_CONFIG_UNIQ=y
+  # CONFIG_BUSYBOX_CONFIG_UNLINK is not set
+  # CONFIG_BUSYBOX_CONFIG_USLEEP is not set
+  # CONFIG_BUSYBOX_CONFIG_UUDECODE is not set
+  # CONFIG_BUSYBOX_CONFIG_BASE32 is not set
+  # CONFIG_BUSYBOX_CONFIG_BASE64 is not set
+  # CONFIG_BUSYBOX_CONFIG_UUENCODE is not set
+  CONFIG_BUSYBOX_CONFIG_WC=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_WC_LARGE is not set
+  # CONFIG_BUSYBOX_CONFIG_WHOAMI is not set
+  CONFIG_BUSYBOX_CONFIG_YES=y
+  # end of Coreutils
+  
+  #
+  # Console Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_CHVT is not set
+  CONFIG_BUSYBOX_CONFIG_CLEAR=y
+  # CONFIG_BUSYBOX_CONFIG_DEALLOCVT is not set
+  # CONFIG_BUSYBOX_CONFIG_DUMPKMAP is not set
+  # CONFIG_BUSYBOX_CONFIG_FGCONSOLE is not set
+  # CONFIG_BUSYBOX_CONFIG_KBD_MODE is not set
+  # CONFIG_BUSYBOX_CONFIG_LOADFONT is not set
+  # CONFIG_BUSYBOX_CONFIG_SETFONT is not set
+  # CONFIG_BUSYBOX_CONFIG_LOADKMAP is not set
+  # CONFIG_BUSYBOX_CONFIG_OPENVT is not set
+  CONFIG_BUSYBOX_CONFIG_RESET=y
+  CONFIG_BUSYBOX_CONFIG_RESIZE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_RESIZE_PRINT is not set
+  # CONFIG_BUSYBOX_CONFIG_SETCONSOLE is not set
+  # CONFIG_BUSYBOX_CONFIG_SETKEYCODES is not set
+  # CONFIG_BUSYBOX_CONFIG_SETLOGCONS is not set
+  # CONFIG_BUSYBOX_CONFIG_SHOWKEY is not set
+  # end of Console Utilities
+  
+  #
+  # Debian Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_PIPE_PROGRESS is not set
+  # CONFIG_BUSYBOX_CONFIG_RUN_PARTS is not set
+  CONFIG_BUSYBOX_CONFIG_START_STOP_DAEMON=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_FANCY is not set
+  CONFIG_BUSYBOX_CONFIG_WHICH=y
+  # end of Debian Utilities
+  
+  #
+  # klibc-utils
+  #
+  # CONFIG_BUSYBOX_CONFIG_MINIPS is not set
+  # CONFIG_BUSYBOX_CONFIG_NUKE is not set
+  # CONFIG_BUSYBOX_CONFIG_RESUME is not set
+  # CONFIG_BUSYBOX_CONFIG_RUN_INIT is not set
+  # end of klibc-utils
+  
+  #
+  # Editors
+  #
+  CONFIG_BUSYBOX_CONFIG_AWK=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_AWK_LIBM=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_AWK_GNU_EXTENSIONS=y
+  CONFIG_BUSYBOX_CONFIG_CMP=y
+  # CONFIG_BUSYBOX_CONFIG_DIFF is not set
+  # CONFIG_BUSYBOX_CONFIG_ED is not set
+  # CONFIG_BUSYBOX_CONFIG_PATCH is not set
+  CONFIG_BUSYBOX_CONFIG_SED=y
+  CONFIG_BUSYBOX_CONFIG_VI=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN=1024
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_VI_8BIT is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_COLON=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_VI_COLON_EXPAND is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_YANKMARK=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_SEARCH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_READONLY=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_SETOPTS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_SET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_WIN_RESIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_VI_UNDO is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_VI_VERBOSE_STATUS is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC=y
+  # end of Editors
+  
+  #
+  # Finding Utilities
+  #
+  CONFIG_BUSYBOX_CONFIG_FIND=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PRINT0=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_MTIME=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_ATIME is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_CTIME is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_MMIN=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_AMIN is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_CMIN is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PERM=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_TYPE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_EXECUTABLE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_XDEV=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_MAXDEPTH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_NEWER=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_INUM is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_SAMEFILE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_EXEC=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_EXEC_PLUS is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_USER=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_GROUP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_NOT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_DEPTH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PAREN=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_SIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PRUNE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_QUIT is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_DELETE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_EMPTY is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_PATH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_REGEX=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_FIND_LINKS is not set
+  CONFIG_BUSYBOX_CONFIG_GREP=y
+  CONFIG_BUSYBOX_CONFIG_EGREP=y
+  CONFIG_BUSYBOX_CONFIG_FGREP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT=y
+  CONFIG_BUSYBOX_CONFIG_XARGS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_PARALLEL is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ARGS_FILE is not set
+  # end of Finding Utilities
+  
+  #
+  # Init Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_BOOTCHARTD is not set
+  CONFIG_BUSYBOX_CONFIG_HALT=y
+  CONFIG_BUSYBOX_CONFIG_POWEROFF=y
+  CONFIG_BUSYBOX_CONFIG_REBOOT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_WAIT_FOR_INIT is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CALL_TELINIT is not set
+  # CONFIG_BUSYBOX_CONFIG_INIT is not set
+  # CONFIG_BUSYBOX_CONFIG_LINUXRC is not set
+  # end of Init Utilities
+  
+  #
+  # Login/Password Management Utilities
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS=y
+  # CONFIG_BUSYBOX_CONFIG_USE_BB_PWD_GRP is not set
+  # CONFIG_BUSYBOX_CONFIG_USE_BB_CRYPT is not set
+  # CONFIG_BUSYBOX_CONFIG_ADD_SHELL is not set
+  # CONFIG_BUSYBOX_CONFIG_REMOVE_SHELL is not set
+  # CONFIG_BUSYBOX_CONFIG_ADDGROUP is not set
+  # CONFIG_BUSYBOX_CONFIG_ADDUSER is not set
+  # CONFIG_BUSYBOX_CONFIG_CHPASSWD is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="md5"
+  # CONFIG_BUSYBOX_CONFIG_CRYPTPW is not set
+  # CONFIG_BUSYBOX_CONFIG_MKPASSWD is not set
+  # CONFIG_BUSYBOX_CONFIG_DELUSER is not set
+  # CONFIG_BUSYBOX_CONFIG_DELGROUP is not set
+  # CONFIG_BUSYBOX_CONFIG_GETTY is not set
+  CONFIG_BUSYBOX_CONFIG_LOGIN=y
+  # CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
+  # CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY is not set
+  CONFIG_BUSYBOX_CONFIG_PASSWD=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+  # CONFIG_BUSYBOX_CONFIG_SU is not set
+  # CONFIG_BUSYBOX_CONFIG_SULOGIN is not set
+  # CONFIG_BUSYBOX_CONFIG_VLOCK is not set
+  # end of Login/Password Management Utilities
+  
+  #
+  # Linux Ext2 FS Progs
+  #
+  # CONFIG_BUSYBOX_CONFIG_CHATTR is not set
+  # CONFIG_BUSYBOX_CONFIG_FSCK is not set
+  # CONFIG_BUSYBOX_CONFIG_LSATTR is not set
+  # CONFIG_BUSYBOX_CONFIG_TUNE2FS is not set
+  # end of Linux Ext2 FS Progs
+  
+  #
+  # Linux Module Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_MODPROBE_SMALL is not set
+  # CONFIG_BUSYBOX_CONFIG_DEPMOD is not set
+  # CONFIG_BUSYBOX_CONFIG_INSMOD is not set
+  # CONFIG_BUSYBOX_CONFIG_LSMOD is not set
+  # CONFIG_BUSYBOX_CONFIG_MODINFO is not set
+  # CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
+  # CONFIG_BUSYBOX_CONFIG_RMMOD is not set
+  
+  #
+  # Options common to multiple modutils
+  #
+  # end of Linux Module Utilities
+  
+  #
+  # Linux System Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_ACPID is not set
+  # CONFIG_BUSYBOX_CONFIG_BLKDISCARD is not set
+  # CONFIG_BUSYBOX_CONFIG_BLKID is not set
+  # CONFIG_BUSYBOX_CONFIG_BLOCKDEV is not set
+  # CONFIG_BUSYBOX_CONFIG_CAL is not set
+  # CONFIG_BUSYBOX_CONFIG_CHRT is not set
+  CONFIG_BUSYBOX_CONFIG_DMESG=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY=y
+  # CONFIG_BUSYBOX_CONFIG_EJECT is not set
+  # CONFIG_BUSYBOX_CONFIG_FALLOCATE is not set
+  # CONFIG_BUSYBOX_CONFIG_FATATTR is not set
+  # CONFIG_BUSYBOX_CONFIG_FBSET is not set
+  # CONFIG_BUSYBOX_CONFIG_FDFORMAT is not set
+  # CONFIG_BUSYBOX_CONFIG_FDISK is not set
+  # CONFIG_BUSYBOX_CONFIG_FINDFS is not set
+  CONFIG_BUSYBOX_CONFIG_FLOCK=y
+  # CONFIG_BUSYBOX_CONFIG_FDFLUSH is not set
+  # CONFIG_BUSYBOX_CONFIG_FREERAMDISK is not set
+  # CONFIG_BUSYBOX_CONFIG_FSCK_MINIX is not set
+  # CONFIG_BUSYBOX_CONFIG_FSFREEZE is not set
+  # CONFIG_BUSYBOX_CONFIG_FSTRIM is not set
+  # CONFIG_BUSYBOX_CONFIG_GETOPT is not set
+  CONFIG_BUSYBOX_CONFIG_HEXDUMP=y
+  # CONFIG_BUSYBOX_CONFIG_HD is not set
+  # CONFIG_BUSYBOX_CONFIG_XXD is not set
+  CONFIG_BUSYBOX_CONFIG_HWCLOCK=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+  # CONFIG_BUSYBOX_CONFIG_IONICE is not set
+  # CONFIG_BUSYBOX_CONFIG_IPCRM is not set
+  # CONFIG_BUSYBOX_CONFIG_IPCS is not set
+  # CONFIG_BUSYBOX_CONFIG_LOSETUP is not set
+  # CONFIG_BUSYBOX_CONFIG_LSPCI is not set
+  # CONFIG_BUSYBOX_CONFIG_LSUSB is not set
+  # CONFIG_BUSYBOX_CONFIG_MDEV is not set
+  # CONFIG_BUSYBOX_CONFIG_MESG is not set
+  # CONFIG_BUSYBOX_CONFIG_MKE2FS is not set
+  # CONFIG_BUSYBOX_CONFIG_MKFS_EXT2 is not set
+  # CONFIG_BUSYBOX_CONFIG_MKFS_MINIX is not set
+  # CONFIG_BUSYBOX_CONFIG_MKFS_REISER is not set
+  # CONFIG_BUSYBOX_CONFIG_MKDOSFS is not set
+  # CONFIG_BUSYBOX_CONFIG_MKFS_VFAT is not set
+  CONFIG_BUSYBOX_CONFIG_MKSWAP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID is not set
+  # CONFIG_BUSYBOX_CONFIG_MORE is not set
+  CONFIG_BUSYBOX_CONFIG_MOUNT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_NFS is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB is not set
+  # CONFIG_BUSYBOX_CONFIG_MOUNTPOINT is not set
+  # CONFIG_BUSYBOX_CONFIG_NSENTER is not set
+  CONFIG_BUSYBOX_CONFIG_PIVOT_ROOT=y
+  # CONFIG_BUSYBOX_CONFIG_RDATE is not set
+  # CONFIG_BUSYBOX_CONFIG_RDEV is not set
+  # CONFIG_BUSYBOX_CONFIG_READPROFILE is not set
+  # CONFIG_BUSYBOX_CONFIG_RENICE is not set
+  # CONFIG_BUSYBOX_CONFIG_REV is not set
+  # CONFIG_BUSYBOX_CONFIG_RTCWAKE is not set
+  # CONFIG_BUSYBOX_CONFIG_SCRIPT is not set
+  # CONFIG_BUSYBOX_CONFIG_SCRIPTREPLAY is not set
+  # CONFIG_BUSYBOX_CONFIG_SETARCH is not set
+  # CONFIG_BUSYBOX_CONFIG_LINUX32 is not set
+  # CONFIG_BUSYBOX_CONFIG_LINUX64 is not set
+  # CONFIG_BUSYBOX_CONFIG_SETPRIV is not set
+  # CONFIG_BUSYBOX_CONFIG_SETSID is not set
+  CONFIG_BUSYBOX_CONFIG_SWAPON=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SWAPON_PRI=y
+  CONFIG_BUSYBOX_CONFIG_SWAPOFF=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SWAPONOFF_LABEL is not set
+  CONFIG_BUSYBOX_CONFIG_SWITCH_ROOT=y
+  CONFIG_BUSYBOX_CONFIG_TASKSET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_CPULIST=y
+  # CONFIG_BUSYBOX_CONFIG_UEVENT is not set
+  CONFIG_BUSYBOX_CONFIG_UMOUNT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL=y
+  # CONFIG_BUSYBOX_CONFIG_UNSHARE is not set
+  
+  #
+  # Common options for mount/umount
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT is not set
+  # CONFIG_BUSYBOX_CONFIG_VOLUMEID is not set
+  # end of Linux System Utilities
+  
+  #
+  # Miscellaneous Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_ADJTIMEX is not set
+  # CONFIG_BUSYBOX_CONFIG_ASCII is not set
+  # CONFIG_BUSYBOX_CONFIG_BBCONFIG is not set
+  # CONFIG_BUSYBOX_CONFIG_BC is not set
+  # CONFIG_BUSYBOX_CONFIG_DC is not set
+  # CONFIG_BUSYBOX_CONFIG_BEEP is not set
+  # CONFIG_BUSYBOX_CONFIG_CHAT is not set
+  # CONFIG_BUSYBOX_CONFIG_CONSPY is not set
+  CONFIG_BUSYBOX_CONFIG_CROND=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CROND_D is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_CROND_SPECIAL_TIMES is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_CROND_DIR="/etc"
+  CONFIG_BUSYBOX_CONFIG_CRONTAB=y
+  # CONFIG_BUSYBOX_CONFIG_DEVFSD is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_DEVFS is not set
+  # CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
+  # CONFIG_BUSYBOX_CONFIG_FBSPLASH is not set
+  # CONFIG_BUSYBOX_CONFIG_FLASH_ERASEALL is not set
+  # CONFIG_BUSYBOX_CONFIG_FLASH_LOCK is not set
+  # CONFIG_BUSYBOX_CONFIG_FLASH_UNLOCK is not set
+  # CONFIG_BUSYBOX_CONFIG_FLASHCP is not set
+  # CONFIG_BUSYBOX_CONFIG_HDPARM is not set
+  # CONFIG_BUSYBOX_CONFIG_HEXEDIT is not set
+  # CONFIG_BUSYBOX_CONFIG_I2CGET is not set
+  # CONFIG_BUSYBOX_CONFIG_I2CSET is not set
+  # CONFIG_BUSYBOX_CONFIG_I2CDUMP is not set
+  # CONFIG_BUSYBOX_CONFIG_I2CDETECT is not set
+  # CONFIG_BUSYBOX_CONFIG_I2CTRANSFER is not set
+  # CONFIG_BUSYBOX_CONFIG_INOTIFYD is not set
+  CONFIG_BUSYBOX_CONFIG_LESS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES=9999999
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_FLAGS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_TRUNCATE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_MARKS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_REGEXP is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_WINCH is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD is not set
+  CONFIG_BUSYBOX_CONFIG_LOCK=y
+  # CONFIG_BUSYBOX_CONFIG_LSSCSI is not set
+  # CONFIG_BUSYBOX_CONFIG_MAKEDEVS is not set
+  # CONFIG_BUSYBOX_CONFIG_MAN is not set
+  # CONFIG_BUSYBOX_CONFIG_MICROCOM is not set
+  # CONFIG_BUSYBOX_CONFIG_MT is not set
+  # CONFIG_BUSYBOX_CONFIG_NANDWRITE is not set
+  # CONFIG_BUSYBOX_CONFIG_NANDDUMP is not set
+  # CONFIG_BUSYBOX_CONFIG_PARTPROBE is not set
+  # CONFIG_BUSYBOX_CONFIG_RAIDAUTORUN is not set
+  # CONFIG_BUSYBOX_CONFIG_READAHEAD is not set
+  # CONFIG_BUSYBOX_CONFIG_RFKILL is not set
+  # CONFIG_BUSYBOX_CONFIG_RX is not set
+  # CONFIG_BUSYBOX_CONFIG_SEEDRNG is not set
+  # CONFIG_BUSYBOX_CONFIG_SETFATTR is not set
+  # CONFIG_BUSYBOX_CONFIG_SETSERIAL is not set
+  CONFIG_BUSYBOX_CONFIG_STRINGS=y
+  CONFIG_BUSYBOX_CONFIG_TIME=y
+  # CONFIG_BUSYBOX_CONFIG_TREE is not set
+  # CONFIG_BUSYBOX_CONFIG_TS is not set
+  # CONFIG_BUSYBOX_CONFIG_TTYSIZE is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIATTACH is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIDETACH is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIMKVOL is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIRMVOL is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIRSVOL is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIUPDATEVOL is not set
+  # CONFIG_BUSYBOX_CONFIG_UBIRENAME is not set
+  # CONFIG_BUSYBOX_CONFIG_VOLNAME is not set
+  # CONFIG_BUSYBOX_CONFIG_WATCHDOG is not set
+  # end of Miscellaneous Utilities
+  
+  #
+  # Networking Utilities
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IPV6=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS is not set
+  CONFIG_BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_ETC_SERVICES is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_HWIB is not set
+  # CONFIG_BUSYBOX_CONFIG_ARP is not set
+  # CONFIG_BUSYBOX_CONFIG_ARPING is not set
+  CONFIG_BUSYBOX_CONFIG_BRCTL=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW=y
+  # CONFIG_BUSYBOX_CONFIG_DNSD is not set
+  # CONFIG_BUSYBOX_CONFIG_ETHER_WAKE is not set
+  # CONFIG_BUSYBOX_CONFIG_FTPD is not set
+  # CONFIG_BUSYBOX_CONFIG_FTPGET is not set
+  # CONFIG_BUSYBOX_CONFIG_FTPPUT is not set
+  # CONFIG_BUSYBOX_CONFIG_HOSTNAME is not set
+  # CONFIG_BUSYBOX_CONFIG_DNSDOMAINNAME is not set
+  # CONFIG_BUSYBOX_CONFIG_HTTPD is not set
+  CONFIG_BUSYBOX_CONFIG_IFCONFIG=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+  # CONFIG_BUSYBOX_CONFIG_IFENSLAVE is not set
+  # CONFIG_BUSYBOX_CONFIG_IFPLUGD is not set
+  # CONFIG_BUSYBOX_CONFIG_IFUP is not set
+  # CONFIG_BUSYBOX_CONFIG_IFDOWN is not set
+  # CONFIG_BUSYBOX_CONFIG_INETD is not set
+  CONFIG_BUSYBOX_CONFIG_IP=y
+  # CONFIG_BUSYBOX_CONFIG_IPADDR is not set
+  # CONFIG_BUSYBOX_CONFIG_IPLINK is not set
+  # CONFIG_BUSYBOX_CONFIG_IPROUTE is not set
+  # CONFIG_BUSYBOX_CONFIG_IPTUNNEL is not set
+  # CONFIG_BUSYBOX_CONFIG_IPRULE is not set
+  # CONFIG_BUSYBOX_CONFIG_IPNEIGH is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IP_ADDRESS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IP_LINK=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IP_ROUTE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_IP_TUNNEL is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IP_RULE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_IP_NEIGH=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+  # CONFIG_BUSYBOX_CONFIG_IPCALC is not set
+  # CONFIG_BUSYBOX_CONFIG_FAKEIDENTD is not set
+  # CONFIG_BUSYBOX_CONFIG_NAMEIF is not set
+  # CONFIG_BUSYBOX_CONFIG_NBDCLIENT is not set
+  CONFIG_BUSYBOX_CONFIG_NC=y
+  # CONFIG_BUSYBOX_CONFIG_NETCAT is not set
+  # CONFIG_BUSYBOX_CONFIG_NC_SERVER is not set
+  # CONFIG_BUSYBOX_CONFIG_NC_EXTRA is not set
+  # CONFIG_BUSYBOX_CONFIG_NC_110_COMPAT is not set
+  CONFIG_BUSYBOX_CONFIG_NETMSG=y
+  CONFIG_BUSYBOX_CONFIG_NETSTAT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG=y
+  CONFIG_BUSYBOX_CONFIG_NSLOOKUP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS is not set
+  CONFIG_BUSYBOX_CONFIG_NTPD=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_CONF is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_NTP_AUTH is not set
+  CONFIG_BUSYBOX_CONFIG_PING=y
+  CONFIG_BUSYBOX_CONFIG_PING6=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_PING=y
+  # CONFIG_BUSYBOX_CONFIG_PSCAN is not set
+  CONFIG_BUSYBOX_CONFIG_ROUTE=y
+  # CONFIG_BUSYBOX_CONFIG_SLATTACH is not set
+  # CONFIG_BUSYBOX_CONFIG_SSL_CLIENT is not set
+  # CONFIG_BUSYBOX_CONFIG_TC is not set
+  # CONFIG_BUSYBOX_CONFIG_TCPSVD is not set
+  # CONFIG_BUSYBOX_CONFIG_UDPSVD is not set
+  # CONFIG_BUSYBOX_CONFIG_TELNET is not set
+  # CONFIG_BUSYBOX_CONFIG_TELNETD is not set
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_HPA_COMPAT is not set
+  # CONFIG_BUSYBOX_CONFIG_TFTPD is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
+  # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
+  # CONFIG_BUSYBOX_CONFIG_TLS is not set
+  CONFIG_BUSYBOX_CONFIG_TRACEROUTE=y
+  CONFIG_BUSYBOX_CONFIG_TRACEROUTE6=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+  # CONFIG_BUSYBOX_CONFIG_TUNCTL is not set
+  # CONFIG_BUSYBOX_CONFIG_VCONFIG is not set
+  # CONFIG_BUSYBOX_CONFIG_WGET is not set
+  # CONFIG_BUSYBOX_CONFIG_WHOIS is not set
+  # CONFIG_BUSYBOX_CONFIG_ZCIP is not set
+  # CONFIG_BUSYBOX_CONFIG_UDHCPD is not set
+  # CONFIG_BUSYBOX_CONFIG_DUMPLEASES is not set
+  # CONFIG_BUSYBOX_CONFIG_DHCPRELAY is not set
+  CONFIG_BUSYBOX_CONFIG_UDHCPC=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCPC_SANITIZEOPT is not set
+  CONFIG_BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
+  # CONFIG_BUSYBOX_CONFIG_UDHCPC6 is not set
+  
+  #
+  # Common options for DHCP applets
+  #
+  CONFIG_BUSYBOX_CONFIG_UDHCPC_DEFAULT_INTERFACE=""
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_PORT is not set
+  CONFIG_BUSYBOX_CONFIG_UDHCP_DEBUG=0
+  CONFIG_BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
+  CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q is not set
+  # end of Networking Utilities
+  
+  #
+  # Print Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_LPD is not set
+  # CONFIG_BUSYBOX_CONFIG_LPR is not set
+  # CONFIG_BUSYBOX_CONFIG_LPQ is not set
+  # end of Print Utilities
+  
+  #
+  # Mail Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_MAKEMIME is not set
+  # CONFIG_BUSYBOX_CONFIG_POPMAILDIR is not set
+  # CONFIG_BUSYBOX_CONFIG_REFORMIME is not set
+  # CONFIG_BUSYBOX_CONFIG_SENDMAIL is not set
+  # end of Mail Utilities
+  
+  #
+  # Process Utilities
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_FAST_TOP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SHOW_THREADS is not set
+  CONFIG_BUSYBOX_CONFIG_FREE=y
+  # CONFIG_BUSYBOX_CONFIG_FUSER is not set
+  # CONFIG_BUSYBOX_CONFIG_IOSTAT is not set
+  CONFIG_BUSYBOX_CONFIG_KILL=y
+  CONFIG_BUSYBOX_CONFIG_KILLALL=y
+  # CONFIG_BUSYBOX_CONFIG_KILLALL5 is not set
+  # CONFIG_BUSYBOX_CONFIG_LSOF is not set
+  # CONFIG_BUSYBOX_CONFIG_MPSTAT is not set
+  # CONFIG_BUSYBOX_CONFIG_NMETER is not set
+  CONFIG_BUSYBOX_CONFIG_PGREP=y
+  # CONFIG_BUSYBOX_CONFIG_PKILL is not set
+  CONFIG_BUSYBOX_CONFIG_PIDOF=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT is not set
+  # CONFIG_BUSYBOX_CONFIG_PMAP is not set
+  # CONFIG_BUSYBOX_CONFIG_POWERTOP is not set
+  CONFIG_BUSYBOX_CONFIG_PS=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_PS_WIDE=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_PS_LONG is not set
+  # CONFIG_BUSYBOX_CONFIG_PSTREE is not set
+  # CONFIG_BUSYBOX_CONFIG_PWDX is not set
+  # CONFIG_BUSYBOX_CONFIG_SMEMCAP is not set
+  CONFIG_BUSYBOX_CONFIG_BB_SYSCTL=y
+  CONFIG_BUSYBOX_CONFIG_TOP=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_INTERACTIVE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_TOPMEM is not set
+  CONFIG_BUSYBOX_CONFIG_UPTIME=y
+  # CONFIG_BUSYBOX_CONFIG_WATCH is not set
+  # end of Process Utilities
+  
+  #
+  # Runit Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_CHPST is not set
+  # CONFIG_BUSYBOX_CONFIG_SETUIDGID is not set
+  # CONFIG_BUSYBOX_CONFIG_ENVUIDGID is not set
+  # CONFIG_BUSYBOX_CONFIG_ENVDIR is not set
+  # CONFIG_BUSYBOX_CONFIG_SOFTLIMIT is not set
+  # CONFIG_BUSYBOX_CONFIG_RUNSV is not set
+  # CONFIG_BUSYBOX_CONFIG_RUNSVDIR is not set
+  # CONFIG_BUSYBOX_CONFIG_SV is not set
+  # CONFIG_BUSYBOX_CONFIG_SVC is not set
+  # CONFIG_BUSYBOX_CONFIG_SVOK is not set
+  # CONFIG_BUSYBOX_CONFIG_SVLOGD is not set
+  # end of Runit Utilities
+  
+  #
+  # Shells
+  #
+  CONFIG_BUSYBOX_CONFIG_SH_IS_ASH=y
+  # CONFIG_BUSYBOX_CONFIG_SH_IS_HUSH is not set
+  # CONFIG_BUSYBOX_CONFIG_SH_IS_NONE is not set
+  # CONFIG_BUSYBOX_CONFIG_BASH_IS_ASH is not set
+  # CONFIG_BUSYBOX_CONFIG_BASH_IS_HUSH is not set
+  CONFIG_BUSYBOX_CONFIG_BASH_IS_NONE=y
+  CONFIG_BUSYBOX_CONFIG_SHELL_ASH=y
+  CONFIG_BUSYBOX_CONFIG_ASH=y
+  # CONFIG_BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set
+  CONFIG_BUSYBOX_CONFIG_ASH_INTERNAL_GLOB=y
+  CONFIG_BUSYBOX_CONFIG_ASH_BASH_COMPAT=y
+  # CONFIG_BUSYBOX_CONFIG_ASH_BASH_SOURCE_CURDIR is not set
+  # CONFIG_BUSYBOX_CONFIG_ASH_BASH_NOT_FOUND_HOOK is not set
+  CONFIG_BUSYBOX_CONFIG_ASH_JOB_CONTROL=y
+  CONFIG_BUSYBOX_CONFIG_ASH_ALIAS=y
+  CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
+  CONFIG_BUSYBOX_CONFIG_ASH_EXPAND_PRMT=y
+  # CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT is not set
+  # CONFIG_BUSYBOX_CONFIG_ASH_MAIL is not set
+  CONFIG_BUSYBOX_CONFIG_ASH_ECHO=y
+  CONFIG_BUSYBOX_CONFIG_ASH_PRINTF=y
+  CONFIG_BUSYBOX_CONFIG_ASH_TEST=y
+  # CONFIG_BUSYBOX_CONFIG_ASH_SLEEP is not set
+  # CONFIG_BUSYBOX_CONFIG_ASH_HELP is not set
+  CONFIG_BUSYBOX_CONFIG_ASH_GETOPTS=y
+  CONFIG_BUSYBOX_CONFIG_ASH_CMDCMD=y
+  # CONFIG_BUSYBOX_CONFIG_CTTYHACK is not set
+  # CONFIG_BUSYBOX_CONFIG_HUSH is not set
+  # CONFIG_BUSYBOX_CONFIG_SHELL_HUSH is not set
+  
+  #
+  # Options common to all shells
+  #
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SH_MATH=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SH_MATH_64=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SH_MATH_BASE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SH_STANDALONE is not set
+  CONFIG_BUSYBOX_CONFIG_FEATURE_SH_NOFORK=y
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SH_READ_FRAC is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE is not set
+  # CONFIG_BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS is not set
+  # end of Shells
+  
+  #
+  # System Logging Utilities
+  #
+  # CONFIG_BUSYBOX_CONFIG_KLOGD is not set
+  CONFIG_BUSYBOX_CONFIG_LOGGER=y
+  # CONFIG_BUSYBOX_CONFIG_LOGREAD is not set
+  # CONFIG_BUSYBOX_CONFIG_SYSLOGD is not set
+  # end of System Logging Utilities
+  

profiles/sercomm_ap72tip-v4.yml

@@ -0,0 +1,16 @@
+---
+profile: sercomm_ap72tip-v4
+target: ipq53xx
+subtarget: generic
+description: Build image for the Sercomm AP72TIP-v4
+image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-v4-squashfs-sysupgrade.tar
+feeds:
+  - name: qca
+    path: ../../feeds/qca-wifi-7
+include:
+  - ucentral-ap
+packages:
+  - ipq53xx
+  - qca-ssdk-shell
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sercomm_ap72tip.yml

@@ -2,14 +2,14 @@
 profile: sercomm_ap72tip
 target: ipq53xx
 subtarget: generic
-description: Build image for the Sercomm AP72 TIP
+description: Build image for the Sercomm AP72TIP
 image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-squashfs-sysupgrade.tar
 feeds:
-  - name: ipq95xx
-    path: ../../feeds/ipq95xx
-packages:
-  - ipq53xx
+  - name: qca
+    path: ../../feeds/qca-wifi-7
 include:
   - ucentral-ap
+packages:
+  - ipq53xx
 diffconfig: |
   CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sonicfi_rap650c.yml

@@ -0,0 +1,15 @@
+---
+profile: sonicfi_rap650c
+target: ipq807x
+subtarget: generic
+description: Build image for the SonicFi RAP650C
+image: bin/targets/ipq807x/generic/openwrt-ipq807x-sonicfi_rap650c-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq807x
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/ucentral-ap.yml

@@ -45,6 +45,7 @@ packages:
   - ucentral-schema
   - ucentral-state
   - ucentral-tools
+  - udhcpinject
   - udhcprelay
   - ufp
   - ugps