ucentral-schema: update to latest HEAD

* minor fixes to handling of boolean values

Signed-off-by: John Crispin <john@phrozen.org>

.github/actions/create-ami-from-image/action.yml

@@ -1,39 +0,0 @@
-name: Create AMI from firmware image in S3 bucket
-
-inputs:
-  firmware_image_name:
-    description: Name of the firmware image
-    required: true
-  firmware_image_s3_bucket:
-    description: Name of the S3 bucket where the image resides
-    required: true
-
-runs:
-  using: "composite"
-  steps:
-    - name: Import snapshot based on firmware image
-      id: import_snapshot
-      shell: bash
-      run: |
-        echo "import_task_id=$(aws ec2 import-snapshot --description '${{ inputs.firmware_image_name }}' --disk-container 'Format=raw,UserBucket={S3Bucket=${{ inputs.firmware_image_s3_bucket }},S3Key=${{ inputs.firmware_image_name }}}' | jq -r '.ImportTaskId')" >> $GITHUB_OUTPUT
-
-    - name: Wait for import task to complete and get snapshot ID
-      id: get_snapshot_id
-      shell: bash
-      run: |
-        IMPORT_TASK_STATUS=""
-        while [[ $IMPORT_TASK_STATUS != 'completed' ]]; do
-          IMPORT_TASK_STATUS=$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.Status')
-          echo "Import task status is $IMPORT_TASK_STATUS, waiting for completion."
-        done
-        echo "id=$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.SnapshotId')" >> $GITHUB_OUTPUT
-
-    - name: Tag snapshot with image name
-      shell: bash
-      run: |
-        aws ec2 create-tags --resources ${{ steps.get_snapshot_id.outputs.id }} --tags 'Key=Name,Value=${{ inputs.firmware_image_name }}'
-
-    - name: Register AMI based on snapshot
-      shell: bash
-      run: |
-        aws ec2 register-image --name '${{ inputs.firmware_image_name }}' --root-device-name /dev/xvda --block-device-mappings 'DeviceName=/dev/xvda,Ebs={SnapshotId=${{ steps.get_snapshot_id.outputs.id }}}'

.github/workflows/build-dev.yml

@@ -1,30 +1,20 @@
 name: Build OpenWrt/uCentral images
 
-env:
-  AWS_DEFAULT_OUTPUT: json
-  AWS_DEFAULT_REGION: us-east-1
-  AWS_S3_BUCKET_NAME: ucentral-ap-firmware
-  AWS_ACCOUNT_ID: ${{ secrets.UCENTRAL_S3_ACCOUNT_ID }}
-  AWS_ACCESS_KEY_ID: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_ID }}
-  AWS_SECRET_ACCESS_KEY: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_SECRET }}
-
 on:
   push:
-    branches: [ main, next, staging-* ]
+    branches: [ uCentral-* ]
     tags: [ v* ]
 
 jobs:
   build:
     runs-on: ubuntu-latest
-    outputs:
-      x64_vm_image_name: ${{ steps.package_and_upload_image.outputs.x64_vm_image_name }}
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf186w', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101_6e', 'edgecore_oap101e', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: ['cig_wf188', 'cig_wf194c', 'cig_wf160d', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'indio_um-305ac', 'linksys_e8450-ubi', 'linksys_ea8300', 'mikrotik_nand', 'tplink_cpe210_v3', 'tplink_cpe510_v3', 'tplink_eap225_outdoor_v1', 'tplink_ec420', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'wallys_dr40x9' ]
 
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v2
 
     - name: Build image for ${{ matrix.target }}
       id: build
@@ -34,12 +24,17 @@ jobs:
         make -j TARGET=${{ matrix.target }}
 
     - name: Package and upload image for ${{ matrix.target }}
-      id: package_and_upload_image
       env:
           GH_BUILD_USERNAME: ${{ secrets.GH_BUILD_USERNAME }}
           GH_BUILD_PASSWORD: ${{ secrets.GH_BUILD_PASSWORD }}
           ARTIFACTORY_USERNAME: cicd-indoor-main
           ARTIFACTORY_PASSWORD: ${{ secrets.ARTIFACTORY_PASSWORD }}
+          AWS_S3_BUCKET_NAME: ucentral-ap-firmware
+          AWS_DEFAULT_OUTPUT: json
+          AWS_DEFAULT_REGION: us-east-1
+          AWS_ACCOUNT_ID: ${{ secrets.UCENTRAL_S3_ACCOUNT_ID }}
+          AWS_ACCESS_KEY_ID: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_ID }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_SECRET }}
       run: |
         LOWERCASE_TARGET=`echo ${{ matrix.target }} | tr '[:upper:]' '[:lower:]'`
         HASH=$(git rev-parse --short HEAD)
@@ -47,10 +42,8 @@ jobs:
         if [[ ${GITHUB_REF} == "refs/heads/"* ]]
         then
           REF=$(echo ${GITHUB_REF#refs/heads/} | tr '/' '-')
-          IS_RELEASE="false"
         else
           REF=$(echo ${GITHUB_REF#refs/tags/} | tr '/' '-')
-          IS_RELEASE="true"
         fi
 
         BASENAME="$(date +%Y%m%d)-$LOWERCASE_TARGET-$REF-$HASH"
@@ -67,36 +60,4 @@ jobs:
         [ -f openwrt/tmp/image-file ] && curl -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "latest-upgrade.json" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/latest-upgrade.json"
 
         [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/octet-stream" "openwrt/$(cat openwrt/tmp/image-file)" "s3://$AWS_S3_BUCKET_NAME/$IMG_NAME"
-        [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$IMG_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
         [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/json" "latest-upgrade.json" "s3://$AWS_S3_BUCKET_NAME/$JSON_NAME"
-        [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$JSON_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
-
-        if [ ${{ matrix.target }} == 'x64_vm' ]; then
-          echo "x64_vm_image_name=$(echo $IMG_NAME)" >> $GITHUB_OUTPUT
-        fi
-
-  trigger-testing:
-    runs-on: ubuntu-latest
-    needs: build
-    if: startsWith(github.ref, 'refs/tags/v')
-    steps:
-    - name: Trigger testing of release
-      uses: peter-evans/repository-dispatch@v1
-      with:
-        token: ${{ secrets.WLAN_TESTING_PAT }}
-        repository: Telecominfraproject/wlan-testing
-        event-type: new-ap-release
-        client-payload: '{"ref": "${GITHUB_REF#refs/tags/}", "sha": "${{ github.sha }}"}'
-
-  create-x64_vm-ami:
-    runs-on: ubuntu-latest
-    needs: build
-    if: startsWith(github.ref, 'refs/tags/v')
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Use create-ami-from-image composite action
-      uses: ./.github/actions/create-ami-from-image
-      with:
-        firmware_image_name: ${{ needs.build.outputs.x64_vm_image_name }}
-        firmware_image_s3_bucket: ${{ env.AWS_S3_BUCKET_NAME }}

.github/workflows/x64_vm-build-test.yml

@@ -1,88 +0,0 @@
-name: Test x64_vm build and AMI creation
-
-env:
-  AWS_DEFAULT_OUTPUT: json
-  AWS_DEFAULT_REGION: us-east-1
-  AWS_S3_BUCKET_NAME: ucentral-ap-firmware
-  AWS_ACCOUNT_ID: ${{ secrets.UCENTRAL_S3_ACCOUNT_ID }}
-  AWS_ACCESS_KEY_ID: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_ID }}
-  AWS_SECRET_ACCESS_KEY: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_SECRET }}
-
-on:
-  workflow_dispatch:
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    outputs:
-      x64_vm_image_name: ${{ steps.package_and_upload_image.outputs.x64_vm_image_name }}
-    strategy:
-      fail-fast: false
-      matrix:
-        target: ['x64_vm']
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Build image for ${{ matrix.target }}
-      id: build
-      run: |
-        git config --global user.email "you@example.com"
-        git config --global user.name "Your Name"
-        make -j TARGET=${{ matrix.target }}
-
-    - name: Package and upload image for ${{ matrix.target }}
-      id: package_and_upload_image
-      env:
-        GH_BUILD_USERNAME: ${{ secrets.GH_BUILD_USERNAME }}
-        GH_BUILD_PASSWORD: ${{ secrets.GH_BUILD_PASSWORD }}
-        ARTIFACTORY_USERNAME: cicd-indoor-main
-        ARTIFACTORY_PASSWORD: ${{ secrets.ARTIFACTORY_PASSWORD }}
-      run: |
-        LOWERCASE_TARGET=`echo ${{ matrix.target }} | tr '[:upper:]' '[:lower:]'`
-        HASH=$(git rev-parse --short HEAD)
-
-        if [[ ${GITHUB_REF} == "refs/heads/"* ]]
-        then
-          REF=$(echo ${GITHUB_REF#refs/heads/} | tr '/' '-')
-          IS_RELEASE="false"
-        else
-          REF=$(echo ${GITHUB_REF#refs/tags/} | tr '/' '-')
-          IS_RELEASE="true"
-        fi
-
-        BASENAME="$(date +%Y%m%d)-$LOWERCASE_TARGET-$REF-$HASH"
-        TAR_NAME="$BASENAME.tar.gz"
-        IMG_NAME="$BASENAME-upgrade.bin";
-        JSON_NAME="$BASENAME.json";
-
-        tar cfz "$TAR_NAME" -C openwrt/bin/targets/ .
-        curl -s -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "$TAR_NAME" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/"$TAR_NAME""
-        IMG_NAME="$BASENAME-upgrade.bin";
-        TIP_VERSION="$(grep DISTRIB_TIP= openwrt/tmp/openwrt_release | cut -d\' -f2)"
-        echo -e "{\n\t\"image\":\""${IMG_NAME}"\",\n\t\"revision\": \""${TIP_VERSION}"\",\n\t\"timestamp\":\""$(date +%s)"\",\n\t\"compatible\": \""${LOWERCASE_TARGET}"\"\n}" > latest-upgrade.json
-        [ -f openwrt/tmp/image-file ] && curl -s -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "openwrt/$(cat openwrt/tmp/image-file)" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/"$IMG_NAME""
-        [ -f openwrt/tmp/image-file ] && curl -s -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "latest-upgrade.json" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/latest-upgrade.json"
-
-        [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/octet-stream" "openwrt/$(cat openwrt/tmp/image-file)" "s3://$AWS_S3_BUCKET_NAME/$IMG_NAME"
-        [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$IMG_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
-        [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/json" "latest-upgrade.json" "s3://$AWS_S3_BUCKET_NAME/$JSON_NAME"
-        [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$JSON_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
-
-        if [[ ${{ matrix.target }} == 'x64_vm' ]]; then
-            echo "x64_vm_image_name=$(echo $IMG_NAME)" >> $GITHUB_OUTPUT
-        fi
-
-  create-x64_vm-ami:
-    runs-on: ubuntu-latest
-    needs: build
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        ref: WIFI-7206-add-workflow-to-build-virtual-ap-image
-
-    - name: Use create-ami-from-image composite action
-      uses: ./.github/actions/create-ami-from-image
-      with:
-        firmware_image_name: ${{ needs.build.outputs.x64_vm_image_name }}
-        firmware_image_s3_bucket: ${{ env.AWS_S3_BUCKET_NAME }}

README.md

@@ -1,83 +1,20 @@
-# OpenWiFi AP NOS
+# Setting up your build machine
 
-OpenWrt-based access point network operating system (AP NOS) for TIP OpenWiFi.
-Read more at [openwifi.tip.build](https://openwifi.tip.build/).
+Requires a recent linux installation. Older systems without python 3.7 will have trouble.  See this link for details: https://openwrt.org/docs/guide-developer/quickstart-build-images
 
-## Building
+Install build packages:  sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml.
 
-### Setting up your build machine
-
-Building requires a recent Linux installation. Older systems without Python 3.7
-will have trouble. See this guide for details:
-https://openwrt.org/docs/guide-developer/toolchain/beginners-build-guide
-
-Install build packages on Debian/Ubuntu (or see above guide for other systems):
+# Doing a native build on Linux
+First we need to clone and setup our tree. This will result in an openwrt/.
 ```
-sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml
+./setup.py --setup
 ```
-
-### Doing a native build on Linux
-
-Use `./build.sh <target>`, or follow the manual steps below:
-
-1. Clone and set up the tree. This will create an `openwrt/` directory.
-```shell
-./setup.py --setup    # for subsequent builds, use --rebase instead
+Next we need to select the profile and base package selection. This setup will install the feeds, packages and generate the .config file.
 ```
-
-2. Select the profile and base package selection. This setup will install the
-   feeds and packages and generate the `.config` file.
-```shell
 cd openwrt
-./scripts/gen_config.py linksys_ea8300
+./scripts/gen_config.py ea8300
 ```
-
-3. Build the tree (replace `-j 8` with the number of cores to use).
-```shell
-make -j 8 V=s
+Finally we can build the tree.
+```
+make -j X V=s
 ```
-
-### Build output
-
-The build results are located in the `openwrt/bin/` directory:
-
-| Type             | Path                                                 |
-| ---------------- | ---------------------------------------------------- |
-| Firmware images  | `openwrt/bin/targets/<target>/<subtarget>/`          |
-| Kernel modules   | `openwrt/bin/targets/<target>/<subtarget>/packages/` |
-| Package binaries | `openwrt/bin/packages/<platform>/<feed>/`            |
-
-## Developer Notes
-
-### Branching model
-
-- `main` - Stable dev branch
-- `next` - Integration branch
-- `staging-*` - Feature/bug branches
-- `release/v#.#.#` - Release branches (*major.minor.patch*)
-
-### Repository structure
-
-Build files:
-- `Makefile` - Calls Docker environment per target
-- `dock-run.sh` - Dockerized build environment
-- `docker/Dockerfile` - Dockerfile for build image
-- `build.sh` - Build script
-- `setup.py` - Clone and set up the tree
-- `config.yml` - Specifies OpenWrt version and patches to apply
-
-Directories:
-- `feeds/` - OpenWiFi feeds
-- `patches/` - OpenWiFi patches applied during builds
-- `profiles/` - Per-target kernel configs, packages, and feeds
-    - [wifi-ax](profiles/wifi-ax.yml): Wi-Fi AX packages
-    - [ucentral-ap](profiles/ucentral-ap.yml): uCentral packages
-    - [x64_vm](profiles/x64_vm.yml): x86-64 VM image
-
-### uCentral packages
-
-AP-NOS packages implementing the uCentral protocol include the following
-repositories (refer to the [ucentral](feeds/ucentral/) feed for a full list):
-- ucentral-client: https://github.com/Telecominfraproject/wlan-ucentral-client
-- ucentral-schema: https://github.com/Telecominfraproject/wlan-ucentral-schema
-- ucentral-wifi: https://github.com/blogic/ucentral-wifi

backports/0008-realtek-update-to-latest-owrt-HEAD.patch

@@ -1,7 +1,7 @@
-From 9baf9f77dbc5129bd0f8f655e9ccf9fab93cd7e6 Mon Sep 17 00:00:00 2001
+From 0b769e318e332d3bf8c7ab68b492cdc90dcb8e18 Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Sat, 4 Sep 2021 05:42:30 +0200
-Subject: [PATCH 01/88] realtek: update to latest owrt HEAD
+Subject: [PATCH 08/27] realtek: update to latest owrt HEAD
 
 Signed-off-by: John Crispin <john@phrozen.org>
 ---
@@ -9,7 +9,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  .../realtek/base-files/etc/board.d/02_network |   12 +-
  .../lib/preinit/05_set_preinit_iface_realtek  |   13 -
  .../lib/preinit/98_remove_preinit_realtek     |    6 -
- target/linux/realtek/config-5.4               |   31 +-
+ target/linux/realtek/config-5.4               |   30 +-
  .../realtek/dts/rtl8380_netgear_gigabit.dtsi  |   11 +-
  .../realtek/dts/rtl8380_zyxel_gs1900-10hp.dts |    4 +-
  .../realtek/dts/rtl8380_zyxel_gs1900-8.dts    |   12 -
@@ -24,7 +24,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  .../files-5.4/drivers/net/dsa/rtl83xx/Kconfig |    2 +-
  .../drivers/net/dsa/rtl83xx/Makefile          |    2 +-
  .../drivers/net/dsa/rtl83xx/common.c          | 1065 +++++-
- .../drivers/net/dsa/rtl83xx/debugfs.c         |  392 +-
+ .../drivers/net/dsa/rtl83xx/debugfs.c         |  392 ++-
  .../files-5.4/drivers/net/dsa/rtl83xx/dsa.c   | 1363 +++++--
  .../drivers/net/dsa/rtl83xx/rtl838x.c         | 1749 ++++++++-
  .../drivers/net/dsa/rtl83xx/rtl838x.h         |  472 ---
@@ -39,10 +39,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
  .../realtek/files-5.4/include/linux/rtl838x.h | 1072 ++++++
  .../realtek/files-5.4/net/dsa/tag_rtl83xx.c   |  119 +
  target/linux/realtek/image/Makefile           |   44 +-
- .../realtek/patches-5.4/100-dsa-lag.patch     | 3145 +++++++++++++++++
+ .../realtek/patches-5.4/100-dsa-lag.patch     | 3123 +++++++++++++++++
  .../realtek/patches-5.4/101-brflood-api.patch |  817 +++++
  ...0-gpio-Add-Realtek-Otto-GPIO-support.patch |  405 +++
- ...net-add-support-for-rtl838x-ethernet.patch |    2 +-
  ...nclude-linux-add-phy-ops-for-rtl838x.patch |    2 +-
  ...04-include-linux-add-phy-hsgmii-mode.patch |   19 +
  .../realtek/patches-5.4/706-sysled.patch      |  288 ++
@@ -52,7 +51,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  .../realtek/patches-5.4/710-adt7470.patch     |   20 +
  .../realtek/patches-5.4/711-ec4100.patch      |  150 +
  .../linux/realtek/patches-5.4/712-fixes.patch |   23 +
- 47 files changed, 16286 insertions(+), 1624 deletions(-)
+ 46 files changed, 16262 insertions(+), 1623 deletions(-)
  delete mode 100644 target/linux/realtek/base-files/lib/preinit/05_set_preinit_iface_realtek
  delete mode 100644 target/linux/realtek/base-files/lib/preinit/98_remove_preinit_realtek
  delete mode 100644 target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts
@@ -160,7 +159,7 @@ index dc5fdb059b..0000000000
 -
 -boot_hook_add preinit_main remove_switch
 diff --git a/target/linux/realtek/config-5.4 b/target/linux/realtek/config-5.4
-index 51025d5d89..cba448acb6 100644
+index 51025d5d89..ced5d5f7ae 100644
 --- a/target/linux/realtek/config-5.4
 +++ b/target/linux/realtek/config-5.4
 @@ -2,17 +2,18 @@ CONFIG_ARCH_32BIT_OFF_T=y
@@ -185,7 +184,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
  CONFIG_CPU_BIG_ENDIAN=y
  CONFIG_CPU_GENERIC_DUMP_TLB=y
-@@ -40,14 +41,11 @@ CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
+@@ -40,14 +41,10 @@ CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
  CONFIG_DTC=y
  CONFIG_EARLY_PRINTK=y
  CONFIG_EARLY_PRINTK_8250=y
@@ -197,11 +196,10 @@ index 51025d5d89..cba448acb6 100644
 -CONFIG_FONT_8x16=y
 -CONFIG_FONT_AUTOSELECT=y
 -CONFIG_FONT_SUPPORT=y
-+CONFIG_FORCE_MAX_ZONEORDER=13
  CONFIG_FW_LOADER_PAGED_BUF=y
  CONFIG_GENERIC_ATOMIC64=y
  CONFIG_GENERIC_CLOCKEVENTS=y
-@@ -74,7 +72,9 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
+@@ -74,7 +71,9 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
  CONFIG_GPIOLIB=y
  CONFIG_GPIO_RTL8231=y
  CONFIG_GPIO_RTL838X=y
@@ -212,7 +210,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_GRO_CELLS=y
  CONFIG_HANDLE_DOMAIN_IRQ=y
  CONFIG_HARDWARE_WATCHPOINTS=y
-@@ -89,6 +89,7 @@ CONFIG_HZ_PERIODIC=y
+@@ -89,6 +88,7 @@ CONFIG_HZ_PERIODIC=y
  CONFIG_I2C=y
  CONFIG_I2C_ALGOBIT=y
  CONFIG_I2C_BOARDINFO=y
@@ -220,7 +218,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_I2C_GPIO=y
  CONFIG_INITRAMFS_SOURCE=""
  CONFIG_IRQCHIP=y
-@@ -107,6 +108,8 @@ CONFIG_MDIO_BUS=y
+@@ -107,6 +107,8 @@ CONFIG_MDIO_BUS=y
  CONFIG_MDIO_DEVICE=y
  CONFIG_MDIO_I2C=y
  CONFIG_MEMFD_CREATE=y
@@ -229,7 +227,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_MFD_SYSCON=y
  CONFIG_MIGRATION=y
  CONFIG_MIPS=y
-@@ -138,7 +141,7 @@ CONFIG_NEED_PER_CPU_KM=y
+@@ -138,7 +140,7 @@ CONFIG_NEED_PER_CPU_KM=y
  CONFIG_NET_DEVLINK=y
  CONFIG_NET_DSA=y
  CONFIG_NET_DSA_RTL83XX=y
@@ -238,7 +236,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_NET_RTL838X=y
  CONFIG_NET_SWITCHDEV=y
  CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-@@ -161,12 +164,17 @@ CONFIG_PINCTRL=y
+@@ -161,12 +163,17 @@ CONFIG_PINCTRL=y
  CONFIG_POWER_RESET=y
  CONFIG_POWER_RESET_SYSCON=y
  CONFIG_PSB6970_PHY=y
@@ -256,7 +254,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_SERIAL_MCTRL_GPIO=y
  CONFIG_SERIAL_OF_PLATFORM=y
  CONFIG_SFP=y
-@@ -175,7 +183,7 @@ CONFIG_SPI_MASTER=y
+@@ -175,7 +182,7 @@ CONFIG_SPI_MASTER=y
  CONFIG_SPI_MEM=y
  CONFIG_SPI_RTL838X=y
  CONFIG_SRCU=y
@@ -265,7 +263,7 @@ index 51025d5d89..cba448acb6 100644
  CONFIG_SWPHY=y
  CONFIG_SYSCTL_EXCEPTION_TRACE=y
  CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-@@ -187,8 +195,11 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+@@ -187,8 +194,11 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
  CONFIG_SYS_SUPPORTS_MIPS16=y
  CONFIG_TARGET_ISA_REV=2
  CONFIG_TICK_CPU_ACCOUNTING=y
@@ -15347,14 +15345,13 @@ index 18e5fedb9b..a4b2ea892c 100644
  $(eval $(call BuildImage))
 diff --git a/target/linux/realtek/patches-5.4/100-dsa-lag.patch b/target/linux/realtek/patches-5.4/100-dsa-lag.patch
 new file mode 100644
-index 0000000000..5a28760ba9
+index 0000000000..3d1992e4cb
 --- /dev/null
 +++ b/target/linux/realtek/patches-5.4/100-dsa-lag.patch
-@@ -0,0 +1,3145 @@
-+Index: linux-5.4.158/drivers/net/bonding/bond_main.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/bonding/bond_main.c
-++++ linux-5.4.158/drivers/net/bonding/bond_main.c
+@@ -0,0 +1,3123 @@
++diff -urpN linux-5.4.137.old/drivers/net/bonding/bond_main.c linux-5.4.137/drivers/net/bonding/bond_main.c
++--- linux-5.4.137.old/drivers/net/bonding/bond_main.c	2021-08-04 14:05:38.055697349 +0700
+++++ linux-5.4.137/drivers/net/bonding/bond_main.c	2021-08-04 14:05:53.887713713 +0700
 +@@ -1753,6 +1753,8 @@ int bond_enslave(struct net_device *bond
 + 		goto err_unregister;
 + 	}
@@ -15364,10 +15361,9 @@ index 0000000000..5a28760ba9
 + 	res = bond_sysfs_slave_add(new_slave);
 + 	if (res) {
 + 		slave_dbg(bond_dev, slave_dev, "Error %d calling bond_sysfs_slave_add\n", res);
-+Index: linux-5.4.158/drivers/net/dsa/b53/b53_common.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/b53/b53_common.c
-++++ linux-5.4.158/drivers/net/dsa/b53/b53_common.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/b53/b53_common.c linux-5.4.137/drivers/net/dsa/b53/b53_common.c
++--- linux-5.4.137.old/drivers/net/dsa/b53/b53_common.c	2021-08-04 14:05:38.055697349 +0700
+++++ linux-5.4.137/drivers/net/dsa/b53/b53_common.c	2021-08-04 14:05:53.887713713 +0700
 +@@ -537,7 +537,7 @@ int b53_enable_port(struct dsa_switch *d
 + 	if (!dsa_is_user_port(ds, port))
 + 		return 0;
@@ -15395,7 +15391,7 @@ index 0000000000..5a28760ba9
 + 	unsigned int i;
 + 	u16 pvlan, reg, pvid;
 + 
-+@@ -2395,10 +2395,13 @@ struct b53_device *b53_switch_alloc(stru
++@@ -2396,10 +2396,13 @@ struct b53_device *b53_switch_alloc(stru
 + 	struct dsa_switch *ds;
 + 	struct b53_device *dev;
 + 
@@ -15410,10 +15406,9 @@ index 0000000000..5a28760ba9
 + 	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
 + 	if (!dev)
 + 		return NULL;
-+Index: linux-5.4.158/drivers/net/dsa/bcm_sf2.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/bcm_sf2.c
-++++ linux-5.4.158/drivers/net/dsa/bcm_sf2.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/bcm_sf2.c linux-5.4.137/drivers/net/dsa/bcm_sf2.c
++--- linux-5.4.137.old/drivers/net/dsa/bcm_sf2.c	2021-08-04 14:05:38.055697349 +0700
+++++ linux-5.4.137/drivers/net/dsa/bcm_sf2.c	2021-08-04 14:05:53.887713713 +0700
 +@@ -670,7 +670,7 @@ static void bcm_sf2_sw_fixed_state(struc
 + 		 * state machine and make it go in PHY_FORCING state instead.
 + 		 */
@@ -15444,10 +15439,9 @@ index 0000000000..5a28760ba9
 + 	struct ethtool_wolinfo pwol =  { };
 + 
 + 	if (p->ethtool_ops->get_wol)
-+Index: linux-5.4.158/drivers/net/dsa/bcm_sf2_cfp.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/bcm_sf2_cfp.c
-++++ linux-5.4.158/drivers/net/dsa/bcm_sf2_cfp.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/bcm_sf2_cfp.c linux-5.4.137/drivers/net/dsa/bcm_sf2_cfp.c
++--- linux-5.4.137.old/drivers/net/dsa/bcm_sf2_cfp.c	2021-08-04 14:05:38.055697349 +0700
+++++ linux-5.4.137/drivers/net/dsa/bcm_sf2_cfp.c	2021-08-04 14:05:53.887713713 +0700
 +@@ -821,7 +821,7 @@ static int bcm_sf2_cfp_rule_insert(struc
 + 				   struct ethtool_rx_flow_spec *fs)
 + {
@@ -15475,10 +15469,9 @@ index 0000000000..5a28760ba9
 + 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 + 	int ret = 0;
 + 
-+Index: linux-5.4.158/drivers/net/dsa/dsa_loop.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/dsa_loop.c
-++++ linux-5.4.158/drivers/net/dsa/dsa_loop.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/dsa_loop.c linux-5.4.137/drivers/net/dsa/dsa_loop.c
++--- linux-5.4.137.old/drivers/net/dsa/dsa_loop.c	2021-08-04 14:05:38.055697349 +0700
+++++ linux-5.4.137/drivers/net/dsa/dsa_loop.c	2021-08-04 14:05:53.887713713 +0700
 +@@ -286,10 +286,13 @@ static int dsa_loop_drv_probe(struct mdi
 + 	dev_info(&mdiodev->dev, "%s: 0x%0x\n",
 + 		 pdata->name, pdata->enabled_ports);
@@ -15494,11 +15487,10 @@ index 0000000000..5a28760ba9
 + 	ps = devm_kzalloc(&mdiodev->dev, sizeof(*ps), GFP_KERNEL);
 + 	if (!ps)
 + 		return -ENOMEM;
-+Index: linux-5.4.158/drivers/net/dsa/lan9303-core.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/lan9303-core.c
-++++ linux-5.4.158/drivers/net/dsa/lan9303-core.c
-+@@ -1287,10 +1287,12 @@ static int lan9303_register_switch(struc
++diff -urpN linux-5.4.137.old/drivers/net/dsa/lan9303-core.c linux-5.4.137/drivers/net/dsa/lan9303-core.c
++--- linux-5.4.137.old/drivers/net/dsa/lan9303-core.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/lan9303-core.c	2021-08-04 14:05:53.887713713 +0700
++@@ -1283,10 +1283,12 @@ static int lan9303_register_switch(struc
 + {
 + 	int base;
 + 
@@ -15512,11 +15504,10 @@ index 0000000000..5a28760ba9
 + 	chip->ds->priv = chip;
 + 	chip->ds->ops = &lan9303_switch_ops;
 + 	base = chip->phy_addr_base;
-+Index: linux-5.4.158/drivers/net/dsa/lantiq_gswip.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/lantiq_gswip.c
-++++ linux-5.4.158/drivers/net/dsa/lantiq_gswip.c
-+@@ -2013,10 +2013,12 @@ static int gswip_probe(struct platform_d
++diff -urpN linux-5.4.137.old/drivers/net/dsa/lantiq_gswip.c linux-5.4.137/drivers/net/dsa/lantiq_gswip.c
++--- linux-5.4.137.old/drivers/net/dsa/lantiq_gswip.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/lantiq_gswip.c	2021-08-04 14:05:53.887713713 +0700
++@@ -2006,10 +2006,12 @@ static int gswip_probe(struct platform_d
 + 	if (!priv->hw_info)
 + 		return -EINVAL;
 + 
@@ -15530,10 +15521,9 @@ index 0000000000..5a28760ba9
 + 	priv->ds->priv = priv;
 + 	priv->ds->ops = &gswip_switch_ops;
 + 	priv->dev = dev;
-+Index: linux-5.4.158/drivers/net/dsa/microchip/ksz_common.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/microchip/ksz_common.c
-++++ linux-5.4.158/drivers/net/dsa/microchip/ksz_common.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/microchip/ksz_common.c linux-5.4.137/drivers/net/dsa/microchip/ksz_common.c
++--- linux-5.4.137.old/drivers/net/dsa/microchip/ksz_common.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/microchip/ksz_common.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -396,10 +396,13 @@ struct ksz_device *ksz_switch_alloc(stru
 + 	struct dsa_switch *ds;
 + 	struct ksz_device *swdev;
@@ -15549,11 +15539,10 @@ index 0000000000..5a28760ba9
 + 	swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
 + 	if (!swdev)
 + 		return NULL;
-+Index: linux-5.4.158/drivers/net/dsa/mt7530.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mt7530.c
-++++ linux-5.4.158/drivers/net/dsa/mt7530.c
-+@@ -786,7 +786,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mt7530.c linux-5.4.137/drivers/net/dsa/mt7530.c
++--- linux-5.4.137.old/drivers/net/dsa/mt7530.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mt7530.c	2021-08-04 14:05:53.891713717 +0700
++@@ -785,7 +785,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
 + 
 + 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
 + 		if (dsa_is_user_port(ds, i) &&
@@ -15562,7 +15551,16 @@ index 0000000000..5a28760ba9
 + 			all_user_ports_removed = false;
 + 			break;
 + 		}
-+@@ -1217,7 +1217,7 @@ mt7530_setup(struct dsa_switch *ds)
++@@ -843,7 +843,7 @@ mt7530_port_bridge_leave(struct dsa_swit
++ 		 * other port is still a VLAN-aware port.
++ 		 */
++ 		if (dsa_is_user_port(ds, i) && i != port &&
++-		   !dsa_port_is_vlan_filtering(&ds->ports[i])) {
+++		   !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
++ 			if (dsa_to_port(ds, i)->bridge_dev != bridge)
++ 				continue;
++ 			if (priv->ports[i].enable)
++@@ -1219,7 +1219,7 @@ mt7530_setup(struct dsa_switch *ds)
 + 	 * controller also is the container for two GMACs nodes representing
 + 	 * as two netdev instances.
 + 	 */
@@ -15571,7 +15569,7 @@ index 0000000000..5a28760ba9
 + 	ds->configure_vlan_while_not_filtering = true;
 + 
 + 	if (priv->id == ID_MT7530) {
-+@@ -1304,7 +1304,7 @@ mt7530_setup(struct dsa_switch *ds)
++@@ -1306,7 +1306,7 @@ mt7530_setup(struct dsa_switch *ds)
 + 
 + 	if (!dsa_is_unused_port(ds, 5)) {
 + 		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
@@ -15580,7 +15578,7 @@ index 0000000000..5a28760ba9
 + 	} else {
 + 		/* Scan the ethernet nodes. look for GMAC1, lookup used phy */
 + 		for_each_child_of_node(dn, mac_np) {
-+@@ -1647,10 +1647,13 @@ mt7530_probe(struct mdio_device *mdiodev
++@@ -1649,10 +1649,13 @@ mt7530_probe(struct mdio_device *mdiodev
 + 	if (!priv)
 + 		return -ENOMEM;
 + 
@@ -15595,10 +15593,9 @@ index 0000000000..5a28760ba9
 + 	/* Use medatek,mcm property to distinguish hardware type that would
 + 	 * casues a little bit differences on power-on sequence.
 + 	 */
-+Index: linux-5.4.158/drivers/net/dsa/mv88e6060.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mv88e6060.c
-++++ linux-5.4.158/drivers/net/dsa/mv88e6060.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mv88e6060.c linux-5.4.137/drivers/net/dsa/mv88e6060.c
++--- linux-5.4.137.old/drivers/net/dsa/mv88e6060.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mv88e6060.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -270,10 +270,12 @@ static int mv88e6060_probe(struct mdio_d
 + 
 + 	dev_info(dev, "switch %s detected\n", name);
@@ -15613,10 +15610,9 @@ index 0000000000..5a28760ba9
 + 	ds->priv = priv;
 + 	ds->dev = dev;
 + 	ds->ops = &mv88e6060_switch_ops;
-+Index: linux-5.4.158/drivers/net/dsa/mv88e6xxx/chip.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mv88e6xxx/chip.c
-++++ linux-5.4.158/drivers/net/dsa/mv88e6xxx/chip.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/chip.c linux-5.4.137/drivers/net/dsa/mv88e6xxx/chip.c
++--- linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/chip.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mv88e6xxx/chip.c	2021-08-04 14:05:57.643717592 +0700
 +@@ -1075,7 +1075,7 @@ static u16 mv88e6xxx_port_vlan(struct mv
 + 	if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port))
 + 		return mv88e6xxx_port_mask(chip);
@@ -16028,10 +16024,9 @@ index 0000000000..5a28760ba9
 + 	dev_set_drvdata(dev, ds);
 + 
 + 	return dsa_register_switch(ds);
-+Index: linux-5.4.158/drivers/net/dsa/mv88e6xxx/global2.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mv88e6xxx/global2.c
-++++ linux-5.4.158/drivers/net/dsa/mv88e6xxx/global2.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/global2.c linux-5.4.137/drivers/net/dsa/mv88e6xxx/global2.c
++--- linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/global2.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mv88e6xxx/global2.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -126,8 +126,8 @@ int mv88e6xxx_g2_device_mapping_write(st
 + 
 + /* Offset 0x07: Trunk Mask Table register */
@@ -16054,10 +16049,9 @@ index 0000000000..5a28760ba9
 + {
 + 	const u16 port_mask = BIT(mv88e6xxx_num_ports(chip)) - 1;
 + 	u16 val = (id << 11) | (map & port_mask);
-+Index: linux-5.4.158/drivers/net/dsa/mv88e6xxx/global2.h
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mv88e6xxx/global2.h
-++++ linux-5.4.158/drivers/net/dsa/mv88e6xxx/global2.h
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/global2.h linux-5.4.137/drivers/net/dsa/mv88e6xxx/global2.h
++--- linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/global2.h	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mv88e6xxx/global2.h	2021-08-04 14:05:53.891713717 +0700
 +@@ -101,6 +101,7 @@
 + #define MV88E6XXX_G2_PVT_ADDR_OP_WRITE_PVLAN	0x3000
 + #define MV88E6XXX_G2_PVT_ADDR_OP_READ		0x4000
@@ -16077,10 +16071,9 @@ index 0000000000..5a28760ba9
 + int mv88e6xxx_g2_trunk_clear(struct mv88e6xxx_chip *chip);
 + 
 + int mv88e6xxx_g2_device_mapping_write(struct mv88e6xxx_chip *chip, int target,
-+Index: linux-5.4.158/drivers/net/dsa/mv88e6xxx/port.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mv88e6xxx/port.c
-++++ linux-5.4.158/drivers/net/dsa/mv88e6xxx/port.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/port.c linux-5.4.137/drivers/net/dsa/mv88e6xxx/port.c
++--- linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/port.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mv88e6xxx/port.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -994,6 +994,27 @@ int mv88e6xxx_port_set_message_port(stru
 + 	return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL1, val);
 + }
@@ -16109,10 +16102,9 @@ index 0000000000..5a28760ba9
 + /* Offset 0x06: Port Based VLAN Map */
 + 
 + int mv88e6xxx_port_set_vlan_map(struct mv88e6xxx_chip *chip, int port, u16 map)
-+Index: linux-5.4.158/drivers/net/dsa/mv88e6xxx/port.h
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/mv88e6xxx/port.h
-++++ linux-5.4.158/drivers/net/dsa/mv88e6xxx/port.h
++diff -urpN linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/port.h linux-5.4.137/drivers/net/dsa/mv88e6xxx/port.h
++--- linux-5.4.137.old/drivers/net/dsa/mv88e6xxx/port.h	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/mv88e6xxx/port.h	2021-08-04 14:05:53.891713717 +0700
 +@@ -168,6 +168,9 @@
 + /* Offset 0x05: Port Control 1 */
 + #define MV88E6XXX_PORT_CTL1			0x05
@@ -16132,10 +16124,9 @@ index 0000000000..5a28760ba9
 + int mv88e6165_port_set_jumbo_size(struct mv88e6xxx_chip *chip, int port,
 + 				  size_t size);
 + int mv88e6095_port_egress_rate_limiting(struct mv88e6xxx_chip *chip, int port);
-+Index: linux-5.4.158/drivers/net/dsa/qca8k.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/qca8k.c
-++++ linux-5.4.158/drivers/net/dsa/qca8k.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/qca8k.c linux-5.4.137/drivers/net/dsa/qca8k.c
++--- linux-5.4.137.old/drivers/net/dsa/qca8k.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/qca8k.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -661,7 +661,7 @@ qca8k_setup(struct dsa_switch *ds)
 + 		return ret;
 + 
@@ -16160,10 +16151,9 @@ index 0000000000..5a28760ba9
 + 	priv->ds->priv = priv;
 + 	priv->ops = qca8k_switch_ops;
 + 	priv->ds->ops = &priv->ops;
-+Index: linux-5.4.158/drivers/net/dsa/realtek-smi-core.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/realtek-smi-core.c
-++++ linux-5.4.158/drivers/net/dsa/realtek-smi-core.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/realtek-smi-core.c linux-5.4.137/drivers/net/dsa/realtek-smi-core.c
++--- linux-5.4.137.old/drivers/net/dsa/realtek-smi-core.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/realtek-smi-core.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -444,9 +444,12 @@ static int realtek_smi_probe(struct plat
 + 		return ret;
 + 	}
@@ -16178,11 +16168,10 @@ index 0000000000..5a28760ba9
 + 	smi->ds->priv = smi;
 + 
 + 	smi->ds->ops = var->ds_ops;
-+Index: linux-5.4.158/drivers/net/dsa/sja1105/sja1105_main.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/sja1105/sja1105_main.c
-++++ linux-5.4.158/drivers/net/dsa/sja1105/sja1105_main.c
-+@@ -1121,7 +1121,7 @@ int sja1105pqrs_fdb_add(struct dsa_switc
++diff -urpN linux-5.4.137.old/drivers/net/dsa/sja1105/sja1105_main.c linux-5.4.137/drivers/net/dsa/sja1105/sja1105_main.c
++--- linux-5.4.137.old/drivers/net/dsa/sja1105/sja1105_main.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/sja1105/sja1105_main.c	2021-08-04 14:05:53.891713717 +0700
++@@ -1096,7 +1096,7 @@ int sja1105pqrs_fdb_add(struct dsa_switc
 + 	l2_lookup.vlanid = vid;
 + 	l2_lookup.iotag = SJA1105_S_TAG;
 + 	l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0);
@@ -16191,7 +16180,7 @@ index 0000000000..5a28760ba9
 + 		l2_lookup.mask_vlanid = VLAN_VID_MASK;
 + 		l2_lookup.mask_iotag = BIT(0);
 + 	} else {
-+@@ -1214,7 +1214,7 @@ int sja1105pqrs_fdb_del(struct dsa_switc
++@@ -1159,7 +1159,7 @@ int sja1105pqrs_fdb_del(struct dsa_switc
 + 	l2_lookup.vlanid = vid;
 + 	l2_lookup.iotag = SJA1105_S_TAG;
 + 	l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0);
@@ -16200,7 +16189,7 @@ index 0000000000..5a28760ba9
 + 		l2_lookup.mask_vlanid = VLAN_VID_MASK;
 + 		l2_lookup.mask_iotag = BIT(0);
 + 	} else {
-+@@ -1260,7 +1260,7 @@ static int sja1105_fdb_add(struct dsa_sw
++@@ -1205,7 +1205,7 @@ static int sja1105_fdb_add(struct dsa_sw
 + 	 * for what gets printed in 'bridge fdb show'.  In the case of zero,
 + 	 * no VID gets printed at all.
 + 	 */
@@ -16209,7 +16198,7 @@ index 0000000000..5a28760ba9
 + 		vid = 0;
 + 
 + 	return priv->info->fdb_add_cmd(ds, port, addr, vid);
-+@@ -1271,7 +1271,7 @@ static int sja1105_fdb_del(struct dsa_sw
++@@ -1216,7 +1216,7 @@ static int sja1105_fdb_del(struct dsa_sw
 + {
 + 	struct sja1105_private *priv = ds->priv;
 + 
@@ -16218,16 +16207,16 @@ index 0000000000..5a28760ba9
 + 		vid = 0;
 + 
 + 	return priv->info->fdb_del_cmd(ds, port, addr, vid);
-+@@ -1310,7 +1310,7 @@ static int sja1105_fdb_dump(struct dsa_s
++@@ -1255,7 +1255,7 @@ static int sja1105_fdb_dump(struct dsa_s
 + 		u64_to_ether_addr(l2_lookup.macaddr, macaddr);
 + 
 + 		/* We need to hide the dsa_8021q VLANs from the user. */
 +-		if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
 ++		if (!dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
 + 			l2_lookup.vlanid = 0;
-+ 		rc = cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
-+ 		if (rc)
-+@@ -1805,7 +1805,7 @@ static int sja1105_port_enable(struct ds
++ 		cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
++ 	}
++@@ -1748,7 +1748,7 @@ static int sja1105_port_enable(struct ds
 + 	if (!dsa_is_user_port(ds, port))
 + 		return 0;
 + 
@@ -16236,7 +16225,7 @@ index 0000000000..5a28760ba9
 + 
 + 	slave->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
 + 
-+@@ -1837,7 +1837,7 @@ static int sja1105_mgmt_xmit(struct dsa_
++@@ -1780,7 +1780,7 @@ static int sja1105_mgmt_xmit(struct dsa_
 + 	}
 + 
 + 	/* Transfer skb to the host port. */
@@ -16245,7 +16234,7 @@ index 0000000000..5a28760ba9
 + 
 + 	/* Wait until the switch has processed the frame */
 + 	do {
-+@@ -2255,10 +2255,12 @@ static int sja1105_probe(struct spi_devi
++@@ -2198,10 +2198,12 @@ static int sja1105_probe(struct spi_devi
 + 
 + 	dev_info(dev, "Probed switch chip: %s\n", priv->info->name);
 + 
@@ -16259,7 +16248,7 @@ index 0000000000..5a28760ba9
 + 	ds->ops = &sja1105_switch_ops;
 + 	ds->priv = priv;
 + 	priv->ds = ds;
-+@@ -2272,8 +2274,8 @@ static int sja1105_probe(struct spi_devi
++@@ -2215,8 +2217,8 @@ static int sja1105_probe(struct spi_devi
 + 	for (i = 0; i < SJA1105_NUM_PORTS; i++) {
 + 		struct sja1105_port *sp = &priv->ports[i];
 + 
@@ -16270,10 +16259,9 @@ index 0000000000..5a28760ba9
 + 		sp->data = tagger_data;
 + 	}
 + 	mutex_init(&priv->mgmt_lock);
-+Index: linux-5.4.158/drivers/net/dsa/vitesse-vsc73xx-core.c
-+===================================================================
-+--- linux-5.4.158.orig/drivers/net/dsa/vitesse-vsc73xx-core.c
-++++ linux-5.4.158/drivers/net/dsa/vitesse-vsc73xx-core.c
++diff -urpN linux-5.4.137.old/drivers/net/dsa/vitesse-vsc73xx-core.c linux-5.4.137/drivers/net/dsa/vitesse-vsc73xx-core.c
++--- linux-5.4.137.old/drivers/net/dsa/vitesse-vsc73xx-core.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/drivers/net/dsa/vitesse-vsc73xx-core.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -1178,9 +1178,12 @@ int vsc73xx_probe(struct vsc73xx *vsc)
 + 	 * We allocate 8 ports and avoid access to the nonexistant
 + 	 * ports.
@@ -16288,10 +16276,9 @@ index 0000000000..5a28760ba9
 + 	vsc->ds->priv = vsc;
 + 
 + 	vsc->ds->ops = &vsc73xx_ds_ops;
-+Index: linux-5.4.158/include/net/dsa.h
-+===================================================================
-+--- linux-5.4.158.orig/include/net/dsa.h
-++++ linux-5.4.158/include/net/dsa.h
++diff -urpN linux-5.4.137.old/include/net/dsa.h linux-5.4.137/include/net/dsa.h
++--- linux-5.4.137.old/include/net/dsa.h	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/include/net/dsa.h	2021-08-04 14:05:57.643717592 +0700
 +@@ -124,17 +124,46 @@ struct dsa_switch_tree {
 + 	 */
 + 	struct dsa_platform_data	*pd;
@@ -16520,10 +16507,9 @@ index 0000000000..5a28760ba9
 + #endif
 + 
 + /* Broadcom tag specific helpers to insert and extract queue/port number */
-+Index: linux-5.4.158/net/dsa/Kconfig
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/Kconfig
-++++ linux-5.4.158/net/dsa/Kconfig
++diff -urpN linux-5.4.137.old/net/dsa/Kconfig linux-5.4.137/net/dsa/Kconfig
++--- linux-5.4.137.old/net/dsa/Kconfig	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/Kconfig	2021-08-04 14:05:53.891713717 +0700
 +@@ -56,14 +56,19 @@ config NET_DSA_TAG_GSWIP
 + 	  Say Y or M if you want to enable support for tagging frames for the
 + 	  Lantiq / Intel GSWIP switches.
@@ -16544,10 +16530,9 @@ index 0000000000..5a28760ba9
 + 	help
 + 	  Say Y or M if you want to enable support for tagging frames for the
 + 	  Marvell switches which use EtherType DSA headers.
-+Index: linux-5.4.158/net/dsa/Makefile
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/Makefile
-++++ linux-5.4.158/net/dsa/Makefile
++diff -urpN linux-5.4.137.old/net/dsa/Makefile linux-5.4.137/net/dsa/Makefile
++--- linux-5.4.137.old/net/dsa/Makefile	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/Makefile	2021-08-04 14:05:53.891713717 +0700
 +@@ -6,8 +6,7 @@ dsa_core-y += dsa.o dsa2.o master.o port
 + # tagging formats
 + obj-$(CONFIG_NET_DSA_TAG_8021Q) += tag_8021q.o
@@ -16558,10 +16543,9 @@ index 0000000000..5a28760ba9
 + obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o
 + obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o
 + obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
-+Index: linux-5.4.158/net/dsa/dsa.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/dsa.c
-++++ linux-5.4.158/net/dsa/dsa.c
++diff -urpN linux-5.4.137.old/net/dsa/dsa.c linux-5.4.137/net/dsa/dsa.c
++--- linux-5.4.137.old/net/dsa/dsa.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/dsa.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -224,11 +224,21 @@ static int dsa_switch_rcv(struct sk_buff
 + 	}
 + 
@@ -16614,11 +16598,10 @@ index 0000000000..5a28760ba9
 + 		if (ret)
 + 			return ret;
 + 	}
-+Index: linux-5.4.158/net/dsa/dsa2.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/dsa2.c
-++++ linux-5.4.158/net/dsa/dsa2.c
-+@@ -24,6 +24,65 @@ static DEFINE_MUTEX(dsa2_mutex);
++diff -urpN linux-5.4.137.old/net/dsa/dsa2.c linux-5.4.137/net/dsa/dsa2.c
++--- linux-5.4.137.old/net/dsa/dsa2.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/dsa2.c	2021-08-04 14:05:57.643717592 +0700
++@@ -25,6 +25,65 @@ static DEFINE_MUTEX(dsa2_mutex);
 + static const struct devlink_ops dsa_devlink_ops = {
 + };
 + 
@@ -16684,7 +16667,7 @@ index 0000000000..5a28760ba9
 + static struct dsa_switch_tree *dsa_tree_find(int index)
 + {
 + 	struct dsa_switch_tree *dst;
-+@@ -45,6 +104,10 @@ static struct dsa_switch_tree *dsa_tree_
++@@ -46,6 +105,10 @@ static struct dsa_switch_tree *dsa_tree_
 + 
 + 	dst->index = index;
 + 
@@ -16695,7 +16678,7 @@ index 0000000000..5a28760ba9
 + 	INIT_LIST_HEAD(&dst->list);
 + 	list_add_tail(&dst->list, &dsa_tree_list);
 + 
-+@@ -111,24 +174,38 @@ static bool dsa_port_is_user(struct dsa_
++@@ -112,24 +175,38 @@ static bool dsa_port_is_user(struct dsa_
 + static struct dsa_port *dsa_tree_find_port_by_node(struct dsa_switch_tree *dst,
 + 						   struct device_node *dn)
 + {
@@ -16747,7 +16730,7 @@ index 0000000000..5a28760ba9
 + }
 + 
 + static bool dsa_port_setup_routing_table(struct dsa_port *dp)
-+@@ -138,6 +215,7 @@ static bool dsa_port_setup_routing_table
++@@ -139,6 +216,7 @@ static bool dsa_port_setup_routing_table
 + 	struct device_node *dn = dp->dn;
 + 	struct of_phandle_iterator it;
 + 	struct dsa_port *link_dp;
@@ -16755,7 +16738,7 @@ index 0000000000..5a28760ba9
 + 	int err;
 + 
 + 	of_for_each_phandle(&it, err, dn, "link", NULL, 0) {
-+@@ -147,24 +225,22 @@ static bool dsa_port_setup_routing_table
++@@ -148,24 +226,22 @@ static bool dsa_port_setup_routing_table
 + 			return false;
 + 		}
 + 
@@ -16787,7 +16770,7 @@ index 0000000000..5a28760ba9
 + 		if (dsa_port_is_dsa(dp)) {
 + 			complete = dsa_port_setup_routing_table(dp);
 + 			if (!complete)
-+@@ -175,81 +251,42 @@ static bool dsa_switch_setup_routing_tab
++@@ -176,81 +252,42 @@ static bool dsa_switch_setup_routing_tab
 + 	return complete;
 + }
 + 
@@ -16884,7 +16867,7 @@ index 0000000000..5a28760ba9
 + }
 + 
 + static int dsa_port_setup(struct dsa_port *dp)
-+@@ -265,6 +302,9 @@ static int dsa_port_setup(struct dsa_por
++@@ -266,6 +303,9 @@ static int dsa_port_setup(struct dsa_por
 + 	bool dsa_port_enabled = false;
 + 	int err = 0;
 + 
@@ -16894,7 +16877,7 @@ index 0000000000..5a28760ba9
 + 	switch (dp->type) {
 + 	case DSA_PORT_TYPE_UNUSED:
 + 		dsa_port_disable(dp);
-+@@ -333,14 +373,21 @@ static int dsa_port_setup(struct dsa_por
++@@ -335,14 +375,21 @@ static int dsa_port_setup(struct dsa_por
 + 		dsa_port_link_unregister_of(dp);
 + 	if (err && devlink_port_registered)
 + 		devlink_port_unregister(dlp);
@@ -16917,7 +16900,7 @@ index 0000000000..5a28760ba9
 + 	switch (dp->type) {
 + 	case DSA_PORT_TYPE_UNUSED:
 + 		break;
-+@@ -363,11 +410,16 @@ static void dsa_port_teardown(struct dsa
++@@ -365,11 +412,16 @@ static void dsa_port_teardown(struct dsa
 + 		}
 + 		break;
 + 	}
@@ -16935,7 +16918,7 @@ index 0000000000..5a28760ba9
 + 
 + 	/* Initialize ds->phys_mii_mask before registering the slave MDIO bus
 + 	 * driver and before ops->setup() has run, since the switch drivers and
-+@@ -409,6 +461,8 @@ static int dsa_switch_setup(struct dsa_s
++@@ -411,6 +463,8 @@ static int dsa_switch_setup(struct dsa_s
 + 			goto teardown;
 + 	}
 + 
@@ -16944,7 +16927,7 @@ index 0000000000..5a28760ba9
 + 	return 0;
 + 
 + teardown:
-+@@ -427,6 +481,9 @@ free_devlink:
++@@ -429,6 +483,9 @@ free_devlink:
 + 
 + static void dsa_switch_teardown(struct dsa_switch *ds)
 + {
@@ -16954,7 +16937,7 @@ index 0000000000..5a28760ba9
 + 	if (ds->slave_mii_bus && ds->ops->phy_read)
 + 		mdiobus_unregister(ds->slave_mii_bus);
 + 
-+@@ -441,89 +498,98 @@ static void dsa_switch_teardown(struct d
++@@ -443,89 +500,98 @@ static void dsa_switch_teardown(struct d
 + 		ds->devlink = NULL;
 + 	}
 + 
@@ -17105,7 +17088,7 @@ index 0000000000..5a28760ba9
 + }
 + 
 + static int dsa_tree_setup(struct dsa_switch_tree *dst)
-+@@ -553,12 +619,18 @@ static int dsa_tree_setup(struct dsa_swi
++@@ -555,12 +621,18 @@ static int dsa_tree_setup(struct dsa_swi
 + 	if (err)
 + 		goto teardown_switches;
 + 
@@ -17124,7 +17107,7 @@ index 0000000000..5a28760ba9
 + teardown_switches:
 + 	dsa_tree_teardown_switches(dst);
 + teardown_default_cpu:
-+@@ -569,48 +641,49 @@ teardown_default_cpu:
++@@ -571,48 +643,49 @@ teardown_default_cpu:
 + 
 + static void dsa_tree_teardown(struct dsa_switch_tree *dst)
 + {
@@ -17196,7 +17179,7 @@ index 0000000000..5a28760ba9
 + }
 + 
 + static int dsa_port_parse_user(struct dsa_port *dp, const char *name)
-+@@ -705,7 +778,7 @@ static int dsa_switch_parse_ports_of(str
++@@ -707,7 +780,7 @@ static int dsa_switch_parse_ports_of(str
 + 			goto out_put_node;
 + 		}
 + 
@@ -17205,7 +17188,7 @@ index 0000000000..5a28760ba9
 + 
 + 		err = dsa_port_parse_of(dp, port);
 + 		if (err)
-+@@ -729,8 +802,6 @@ static int dsa_switch_parse_member_of(st
++@@ -731,8 +804,6 @@ static int dsa_switch_parse_member_of(st
 + 		return sz;
 + 
 + 	ds->index = m[1];
@@ -17214,7 +17197,7 @@ index 0000000000..5a28760ba9
 + 
 + 	ds->dst = dsa_tree_touch(m[0]);
 + 	if (!ds->dst)
-+@@ -739,6 +810,20 @@ static int dsa_switch_parse_member_of(st
++@@ -741,6 +812,20 @@ static int dsa_switch_parse_member_of(st
 + 	return 0;
 + }
 + 
@@ -17235,7 +17218,7 @@ index 0000000000..5a28760ba9
 + static int dsa_switch_parse_of(struct dsa_switch *ds, struct device_node *dn)
 + {
 + 	int err;
-+@@ -747,6 +832,10 @@ static int dsa_switch_parse_of(struct ds
++@@ -749,6 +834,10 @@ static int dsa_switch_parse_of(struct ds
 + 	if (err)
 + 		return err;
 + 
@@ -17246,7 +17229,7 @@ index 0000000000..5a28760ba9
 + 	return dsa_switch_parse_ports_of(ds, dn);
 + }
 + 
-+@@ -784,7 +873,7 @@ static int dsa_switch_parse_ports(struct
++@@ -786,7 +875,7 @@ static int dsa_switch_parse_ports(struct
 + 	for (i = 0; i < DSA_MAX_PORTS; i++) {
 + 		name = cd->port_names[i];
 + 		dev = cd->netdev[i];
@@ -17255,7 +17238,7 @@ index 0000000000..5a28760ba9
 + 
 + 		if (!name)
 + 			continue;
-+@@ -804,6 +893,8 @@ static int dsa_switch_parse_ports(struct
++@@ -806,6 +895,8 @@ static int dsa_switch_parse_ports(struct
 + 
 + static int dsa_switch_parse(struct dsa_switch *ds, struct dsa_chip_data *cd)
 + {
@@ -17264,7 +17247,7 @@ index 0000000000..5a28760ba9
 + 	ds->cd = cd;
 + 
 + 	/* We don't support interconnected switches nor multiple trees via
-+@@ -814,22 +905,26 @@ static int dsa_switch_parse(struct dsa_s
++@@ -816,22 +907,26 @@ static int dsa_switch_parse(struct dsa_s
 + 	if (!ds->dst)
 + 		return -ENOMEM;
 + 
@@ -17298,7 +17281,7 @@ index 0000000000..5a28760ba9
 + 	if (np)
 + 		err = dsa_switch_parse_of(ds, np);
 + 	else if (pdata)
-+@@ -840,29 +935,14 @@ static int dsa_switch_probe(struct dsa_s
++@@ -842,29 +937,14 @@ static int dsa_switch_probe(struct dsa_s
 + 	if (err)
 + 		return err;
 + 
@@ -17334,7 +17317,7 @@ index 0000000000..5a28760ba9
 + 
 + int dsa_register_switch(struct dsa_switch *ds)
 + {
-+@@ -880,9 +960,15 @@ EXPORT_SYMBOL_GPL(dsa_register_switch);
++@@ -882,9 +962,15 @@ EXPORT_SYMBOL_GPL(dsa_register_switch);
 + static void dsa_switch_remove(struct dsa_switch *ds)
 + {
 + 	struct dsa_switch_tree *dst = ds->dst;
@@ -17352,10 +17335,9 @@ index 0000000000..5a28760ba9
 + }
 + 
 + void dsa_unregister_switch(struct dsa_switch *ds)
-+Index: linux-5.4.158/net/dsa/dsa_priv.h
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/dsa_priv.h
-++++ linux-5.4.158/net/dsa/dsa_priv.h
++diff -urpN linux-5.4.137.old/net/dsa/dsa_priv.h linux-5.4.137/net/dsa/dsa_priv.h
++--- linux-5.4.137.old/net/dsa/dsa_priv.h	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/dsa_priv.h	2021-08-04 14:05:53.891713717 +0700
 +@@ -19,6 +19,9 @@ enum {
 + 	DSA_NOTIFIER_BRIDGE_LEAVE,
 + 	DSA_NOTIFIER_FDB_ADD,
@@ -17459,10 +17441,9 @@ index 0000000000..5a28760ba9
 ++void dsa_lag_unmap(struct dsa_switch_tree *dst, struct net_device *lag);
 ++
 + #endif
-+Index: linux-5.4.158/net/dsa/port.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/port.c
-++++ linux-5.4.158/net/dsa/port.c
++diff -urpN linux-5.4.137.old/net/dsa/port.c linux-5.4.137/net/dsa/port.c
++--- linux-5.4.137.old/net/dsa/port.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/port.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -174,6 +174,85 @@ void dsa_port_bridge_leave(struct dsa_po
 + 	dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
 + }
@@ -17549,10 +17530,9 @@ index 0000000000..5a28760ba9
 + static bool dsa_port_can_apply_vlan_filtering(struct dsa_port *dp,
 + 					      bool vlan_filtering)
 + {
-+Index: linux-5.4.158/net/dsa/slave.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/slave.c
-++++ linux-5.4.158/net/dsa/slave.c
++diff -urpN linux-5.4.137.old/net/dsa/slave.c linux-5.4.137/net/dsa/slave.c
++--- linux-5.4.137.old/net/dsa/slave.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/slave.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -26,8 +26,6 @@
 + 
 + #include "dsa_priv.h"
@@ -17608,7 +17588,7 @@ index 0000000000..5a28760ba9
 + 			return -EOPNOTSUPP;
 + 		err = dsa_port_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
 + 		break;
-+@@ -1525,10 +1526,11 @@ void dsa_slave_destroy(struct net_device
++@@ -1527,10 +1528,11 @@ void dsa_slave_destroy(struct net_device
 + 	free_netdev(slave_dev);
 + }
 + 
@@ -17621,7 +17601,7 @@ index 0000000000..5a28760ba9
 + 
 + static int dsa_slave_changeupper(struct net_device *dev,
 + 				 struct netdev_notifier_changeupper_info *info)
-+@@ -1544,6 +1546,46 @@ static int dsa_slave_changeupper(struct
++@@ -1546,6 +1548,46 @@ static int dsa_slave_changeupper(struct
 + 			dsa_port_bridge_leave(dp, info->upper_dev);
 + 			err = NOTIFY_OK;
 + 		}
@@ -17668,7 +17648,7 @@ index 0000000000..5a28760ba9
 + 	}
 + 
 + 	return err;
-+@@ -1586,11 +1628,33 @@ static int dsa_slave_netdevice_event(str
++@@ -1588,11 +1630,33 @@ static int dsa_slave_netdevice_event(str
 + {
 + 	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
 + 
@@ -17704,10 +17684,9 @@ index 0000000000..5a28760ba9
 + 	}
 + 
 + 	return NOTIFY_DONE;
-+Index: linux-5.4.158/net/dsa/switch.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/switch.c
-++++ linux-5.4.158/net/dsa/switch.c
++diff -urpN linux-5.4.137.old/net/dsa/switch.c linux-5.4.137/net/dsa/switch.c
++--- linux-5.4.137.old/net/dsa/switch.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/switch.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -20,7 +20,7 @@ static unsigned int dsa_switch_fastest_a
 + 	int i;
 + 
@@ -17790,10 +17769,9 @@ index 0000000000..5a28760ba9
 + 	case DSA_NOTIFIER_MDB_ADD:
 + 		err = dsa_switch_mdb_add(ds, info);
 + 		break;
-+Index: linux-5.4.158/net/dsa/tag_8021q.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/tag_8021q.c
-++++ linux-5.4.158/net/dsa/tag_8021q.c
++diff -urpN linux-5.4.137.old/net/dsa/tag_8021q.c linux-5.4.137/net/dsa/tag_8021q.c
++--- linux-5.4.137.old/net/dsa/tag_8021q.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/tag_8021q.c	2021-08-04 14:05:57.643717592 +0700
 +@@ -31,15 +31,14 @@
 +  *	Must be transmitted as zero and ignored on receive.
 +  *
@@ -17839,10 +17817,9 @@ index 0000000000..5a28760ba9
 + 	struct bridge_vlan_info vinfo;
 + 	int err;
 + 
-+Index: linux-5.4.158/net/dsa/tag_dsa.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/tag_dsa.c
-++++ linux-5.4.158/net/dsa/tag_dsa.c
++diff -urpN linux-5.4.137.old/net/dsa/tag_dsa.c linux-5.4.137/net/dsa/tag_dsa.c
++--- linux-5.4.137.old/net/dsa/tag_dsa.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/tag_dsa.c	2021-08-04 14:05:53.891713717 +0700
 +@@ -1,7 +1,48 @@
 + // SPDX-License-Identifier: GPL-2.0+
 + /*
@@ -18276,10 +18253,9 @@ index 0000000000..5a28760ba9
 ++module_dsa_tag_drivers(dsa_tag_drivers);
 ++
 ++MODULE_LICENSE("GPL");
-+Index: linux-5.4.158/net/dsa/tag_edsa.c
-+===================================================================
-+--- linux-5.4.158.orig/net/dsa/tag_edsa.c
-++++ /dev/null
++diff -urpN linux-5.4.137.old/net/dsa/tag_edsa.c linux-5.4.137/net/dsa/tag_edsa.c
++--- linux-5.4.137.old/net/dsa/tag_edsa.c	2021-08-04 14:05:38.059697353 +0700
+++++ linux-5.4.137/net/dsa/tag_edsa.c	1970-01-01 07:00:00.000000000 +0700
 +@@ -1,215 +0,0 @@
 +-// SPDX-License-Identifier: GPL-2.0+
 +-/*
@@ -19730,18 +19706,6 @@ index 0000000000..8b43f07e8a
 ++MODULE_DESCRIPTION("Realtek Otto GPIO support");
 ++MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
 ++MODULE_LICENSE("GPL v2");
-diff --git a/target/linux/realtek/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch b/target/linux/realtek/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch
-index 952384ac89..11e62450d5 100644
---- a/target/linux/realtek/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch
-+++ b/target/linux/realtek/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch
-@@ -1,6 +1,6 @@
- --- a/drivers/net/ethernet/Kconfig
- +++ b/drivers/net/ethernet/Kconfig
--@@ -164,6 +164,13 @@ source "drivers/net/ethernet/rdc/Kconfig
-+@@ -163,6 +163,13 @@ source "drivers/net/ethernet/rdc/Kconfig
-  source "drivers/net/ethernet/realtek/Kconfig"
-  source "drivers/net/ethernet/renesas/Kconfig"
-  source "drivers/net/ethernet/rocker/Kconfig"
 diff --git a/target/linux/realtek/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch
 index 03accd1e07..3682eb30a3 100644
 --- a/target/linux/realtek/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch

backports/0009-include-set-kernel-version.mk.patch

@@ -1,7 +1,7 @@
-From d28712edcc0e57b5c0e5d79125a5517ced252e18 Mon Sep 17 00:00:00 2001
+From 4ed9b7d04405d5109681643f3ceebbd25f3f28e2 Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Wed, 7 Apr 2021 10:46:26 +0200
-Subject: [PATCH] include: set kernel-version.mk
+Subject: [PATCH 09/27] include: set kernel-version.mk
 
 Signed-off-by: John Crispin <john@phrozen.org>
 ---
@@ -9,7 +9,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  1 file changed, 6 insertions(+)
 
 diff --git a/include/kernel-version.mk b/include/kernel-version.mk
-index 688660cbbd..c7aba61cd7 100644
+index fe81dbf603..3c109c13c8 100644
 --- a/include/kernel-version.mk
 +++ b/include/kernel-version.mk
 @@ -6,9 +6,15 @@ ifdef CONFIG_TESTING_KERNEL
@@ -18,12 +18,12 @@ index 688660cbbd..c7aba61cd7 100644
  
 +LINUX_VERSION-4.4 = .60
 +LINUX_VERSION-4.14 = .193
- LINUX_VERSION-5.4 = .158
+ LINUX_VERSION-5.4 = .142
 +LINUX_VERSION-5.10 = .27
  
 +LINUX_KERNEL_HASH-4.4.60 = 2cd8df6f1ac6a5329c5a286ec9b5956215977221a1b731597ed169fff74a9659
 +LINUX_KERNEL_HASH-4.14.193 = 0b0fb41d4430e1a42738b341cbfd2f41951aa5cd02acabbd53f076119c8b9f03
- LINUX_KERNEL_HASH-5.4.158 = 6e018fecdc8fc24553756e582d83b82d65b10a6b03ef36262a24911f839b8d59
+ LINUX_KERNEL_HASH-5.4.142 = 99785728968564ba27c7e552d024b560072dcbc885540912eabb5c021e231451
 +LINUX_KERNEL_HASH-5.10.27 = d99dc9662951299c53a0a8d8c8d0a72a16ff861d20e927c0f9b14f63282d69d9
  
  remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

backports/0012-libubox-update-to-latest-HEAD.patch

@@ -0,0 +1,39 @@
+From 2af08d2e85ee946de5f53bbd0ddf239de9b78f6d Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 18 May 2021 10:46:43 +0200
+Subject: [PATCH 12/27] libubox: update to latest HEAD
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ package/libs/libubox/Makefile | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/package/libs/libubox/Makefile b/package/libs/libubox/Makefile
+index d2c07783e1..33aa73eef7 100644
+--- a/package/libs/libubox/Makefile
++++ b/package/libs/libubox/Makefile
+@@ -5,9 +5,9 @@ PKG_RELEASE=2
+ 
+ PKG_SOURCE_PROTO:=git
+ PKG_SOURCE_URL=$(PROJECT_GIT)/project/libubox.git
+-PKG_MIRROR_HASH:=7dd1db1e0074a9c7c722db654cce3111b3bd3cff0bfd791c4497cb0f6c22d3ca
+-PKG_SOURCE_DATE:=2021-05-16
+-PKG_SOURCE_VERSION:=b14c4688612c05c78ce984d7bde633bce8703b1e
++PKG_MIRROR_HASH:=1cdb91ac0ee925f133ee9f70eac131a99def312fe7cf0aed44df84eb1762e30b
++PKG_SOURCE_DATE:=2021-08-19
++PKG_SOURCE_VERSION:=d716ac4bc4236031d4c3cc1ed362b502e20e3787
+ PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
+ CMAKE_INSTALL:=1
+ 
+@@ -67,7 +67,7 @@ define Package/libubox-lua
+ endef
+ 
+ TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include
+-CMAKE_OPTIONS = \
++CMAKE_OPTIONS += \
+ 	-DLUAPATH=/usr/lib/lua \
+ 	-DABIVERSION="$(PKG_ABI_VERSION)"
+ 
+-- 
+2.25.1
+

backports/0017-netifd-update-to-latest-HEAD.patch

@@ -0,0 +1,62 @@
+From 3bc625814c04a24cdf16587c2adb2060a77a5e1a Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 27 May 2021 13:24:47 +0200
+Subject: [PATCH 17/27] netifd: update to latest HEAD
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ package/network/config/netifd/Makefile          |  8 +++-----
+ .../netifd/patches/002-fix-dhcp-issue.patch     | 17 +++++++++++++++++
+ 2 files changed, 20 insertions(+), 5 deletions(-)
+ create mode 100644 package/network/config/netifd/patches/002-fix-dhcp-issue.patch
+
+diff --git a/package/network/config/netifd/Makefile b/package/network/config/netifd/Makefile
+index 4b5f110da2..13c1d96ed7 100644
+--- a/package/network/config/netifd/Makefile
++++ b/package/network/config/netifd/Makefile
+@@ -5,16 +5,14 @@ PKG_RELEASE:=1
+ 
+ PKG_SOURCE_PROTO:=git
+ PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
+-PKG_SOURCE_DATE:=2021-07-26
+-PKG_SOURCE_VERSION:=440eb0647708274cc8d7d9e7c2bb0cfdfba90023
+-PKG_MIRROR_HASH:=eed957036ab608fdc49bdf801fc5b4405fcd2a3a5e5d3343ec39898e156c10e9
++PKG_SOURCE_DATE:=2021-09-01
++PKG_SOURCE_VERSION:=300b1220fab38600f102bb8cfcc59a29ce41b095
++PKG_MIRROR_HASH:=310fa90059795b1c956f9822db712ecc58bc19725b0f05f98c9e0a6824c8ca36
+ PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
+ 
+ PKG_LICENSE:=GPL-2.0
+ PKG_LICENSE_FILES:=
+ 
+-PKG_BUILD_PARALLEL:=1
+-
+ include $(INCLUDE_DIR)/package.mk
+ include $(INCLUDE_DIR)/cmake.mk
+ 
+diff --git a/package/network/config/netifd/patches/002-fix-dhcp-issue.patch b/package/network/config/netifd/patches/002-fix-dhcp-issue.patch
+new file mode 100644
+index 0000000000..6f1d2e708e
+--- /dev/null
++++ b/package/network/config/netifd/patches/002-fix-dhcp-issue.patch
+@@ -0,0 +1,17 @@
++Index: netifd-2019-08-05-5e02f944/interface.c
++===================================================================
++--- netifd-2019-08-05-5e02f944.orig/interface.c
+++++ netifd-2019-08-05-5e02f944/interface.c
++@@ -424,7 +424,11 @@ interface_main_dev_cb(struct device_user
++ 		interface_set_link_state(iface, false);
++ 		break;
++ 	case DEV_EVENT_TOPO_CHANGE:
++-		interface_proto_event(iface->proto, PROTO_CMD_RENEW, false);
+++	/* This renews the dhcp lease when the bridge adds/deletes a
+++	 * new interface. It causes some dhcp servers to fail in
+++	 * case where there are many interfaces being added to the
+++	 * bridge frequently. Disabling this for now. */
+++	/*	interface_proto_event(iface->proto, PROTO_CMD_RENEW, false); */
++ 		return;
++ 	default:
++ 		break;
+-- 
+2.25.1
+

backports/0020-procd-add-uxc-support.patch

@@ -1,17 +1,17 @@
-From 006abf1773051ad355b52d70095f63f44a496b13 Mon Sep 17 00:00:00 2001
+From aab305d662fa77ef4495574c096cb1e065c1908a Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Sun, 25 Jul 2021 13:32:37 +0200
-Subject: [PATCH 02/70] procd: add uxc support
+Subject: [PATCH 20/27] procd: add uxc support
 
 Signed-off-by: John Crispin <john@phrozen.org>
 ---
- package/system/procd/Makefile       | 15 +++---
+ package/system/procd/Makefile       | 12 ++---
  package/system/procd/files/procd.sh | 79 +++++++++++++++++++++++++++++
  package/system/procd/files/uxc.init |  4 ++
- 3 files changed, 90 insertions(+), 8 deletions(-)
+ 3 files changed, 89 insertions(+), 6 deletions(-)
 
 diff --git a/package/system/procd/Makefile b/package/system/procd/Makefile
-index 30d5adf427..b831f86639 100644
+index 30d5adf427..98f1ed1775 100644
 --- a/package/system/procd/Makefile
 +++ b/package/system/procd/Makefile
 @@ -12,9 +12,9 @@ PKG_RELEASE:=$(AUTORELEASE)
@@ -21,9 +21,9 @@ index 30d5adf427..b831f86639 100644
 -PKG_SOURCE_DATE:=2021-02-23
 -PKG_SOURCE_VERSION:=37eed131e9967a35f47bacb3437a9d3c8a57b3f4
 -PKG_MIRROR_HASH:=2b0131ff9055ccf987cbeb5f36c2c2585dc780999df6be312fbbbcd61ce676d4
-+PKG_MIRROR_HASH:=0d51642d82d7bb4150355a6986e54504dce171c6fcb7eeff312d20a5d106bad8
-+PKG_SOURCE_DATE:=2021-11-04
-+PKG_SOURCE_VERSION:=0ee8e734a7f67220cf4a3412b60ff674b5fb20dd
++PKG_SOURCE_DATE:=2021-08-15
++PKG_SOURCE_VERSION:=104b49d6ab25a8cf067e6d8d1f2da7defb9876d4
++PKG_MIRROR_HASH:=d13b566a14e84f6babe8b7d3dfb88e34c3dff0e97d7770d6fe71174685bca628
  CMAKE_INSTALL:=1
  
  PKG_LICENSE:=GPL-2.0
@@ -36,30 +36,21 @@ index 30d5adf427..b831f86639 100644
  endif
  
  CMAKE_OPTIONS += -DEARLY_PATH="$(TARGET_INIT_PATH)"
-@@ -68,7 +68,7 @@ define Package/procd-ujail
-   SECTION:=base
-   CATEGORY:=Base system
-   DEPENDS:=@KERNEL_NAMESPACES +@KERNEL_UTS_NS +@KERNEL_IPC_NS +@KERNEL_PID_NS \
--	  +libubox +libubus +libblobmsg-json
-+	  +libubox +libubus +libuci +libblobmsg-json
-   TITLE:=OpenWrt process jail helper
- endef
- 
-@@ -82,15 +82,14 @@ endef
+@@ -82,7 +82,7 @@ endef
  define Package/procd-seccomp
    SECTION:=base
    CATEGORY:=Base system
 -  DEPENDS:=@(arm||armeb||mips||mipsel||i386||powerpc||x86_64) @!TARGET_uml \
--	  @KERNEL_SECCOMP +libubox +libblobmsg-json
-+  DEPENDS:=@SECCOMP +libubox +libblobmsg-json
++  DEPENDS:=@(aarch64||arm||armeb||mips||mipsel||i386||powerpc||x86_64) @!TARGET_uml \
+ 	  @KERNEL_SECCOMP +libubox +libblobmsg-json
    TITLE:=OpenWrt process seccomp helper + utrace
  endef
- 
+@@ -90,7 +90,7 @@ endef
  define Package/uxc
    SECTION:=base
    CATEGORY:=Base system
 -  DEPENDS:=+procd-ujail +libubus +libubox +libblobmsg-json
-+  DEPENDS:=+procd-ujail +libubus +libubox +libblobmsg-json +blockd +PACKAGE_uxc:rpcd
++  DEPENDS:=+procd-ujail +libubus +libubox +libblobmsg-json +blockd +rpcd
    TITLE:=OpenWrt container management
    MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
  endef

backports/0024-uvol-backport-package.patch

@@ -1,19 +1,19 @@
-From 813b09542fd13428d432e47eecd7191d1b3067fd Mon Sep 17 00:00:00 2001
+From 08809a60a8f2c065a38c24fcdbd69b939e5c29d9 Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Fri, 13 Aug 2021 08:46:57 +0200
-Subject: [PATCH 01/83] uvol: backport package
+Subject: [PATCH 24/27] uvol: backport package
 
 Signed-off-by: John Crispin <john@phrozen.org>
 ---
  package/system/uvol/Makefile                |  77 ++++
  package/system/uvol/files/autopart.defaults | 127 ++++++
  package/system/uvol/files/common.sh         |  83 ++++
- package/system/uvol/files/lvm.sh            | 459 ++++++++++++++++++++
- package/system/uvol/files/ubi.sh            | 358 +++++++++++++++
+ package/system/uvol/files/lvm.sh            | 435 ++++++++++++++++++++
+ package/system/uvol/files/ubi.sh            | 337 +++++++++++++++
  package/system/uvol/files/uvol              |  52 +++
- package/system/uvol/files/uvol.defaults     |  17 +
- package/system/uvol/files/uvol.init         |  23 +
- 8 files changed, 1196 insertions(+)
+ package/system/uvol/files/uvol.defaults     |   3 +
+ package/system/uvol/files/uvol.init         |  23 ++
+ 8 files changed, 1137 insertions(+)
  create mode 100644 package/system/uvol/Makefile
  create mode 100644 package/system/uvol/files/autopart.defaults
  create mode 100644 package/system/uvol/files/common.sh
@@ -25,14 +25,14 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 diff --git a/package/system/uvol/Makefile b/package/system/uvol/Makefile
 new file mode 100644
-index 0000000000..6583e6e756
+index 0000000000..bd70410c5e
 --- /dev/null
 +++ b/package/system/uvol/Makefile
 @@ -0,0 +1,77 @@
 +include $(TOPDIR)/rules.mk
 +
 +PKG_NAME:=uvol
-+PKG_VERSION:=0.6
++PKG_VERSION:=0.4
 +PKG_RELEASE:=$(AUTORELEASE)
 +
 +PKG_MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
@@ -45,7 +45,7 @@ index 0000000000..6583e6e756
 +  CATEGORY:=Utilities
 +  SUBMENU:=Disc
 +  TITLE:=Automatically initialize LVM partition
-+  DEPENDS:=+lvm2 +partx-utils +sfdisk
++  DEPENDS:=+partx-utils +sfdisk
 +  PKGARCH=all
 +endef
 +
@@ -101,7 +101,7 @@ index 0000000000..6583e6e756
 +	$(INSTALL_BIN) ./files/ubi.sh $(1)/usr/libexec/uvol/20-ubi.sh
 +	$(INSTALL_BIN) ./files/lvm.sh $(1)/usr/libexec/uvol/50-lvm.sh
 +	$(INSTALL_BIN) ./files/uvol $(1)/usr/sbin
-+	$(INSTALL_BIN) ./files/uvol.defaults $(1)/etc/uci-defaults/90-uvol-init
++	$(INSTALL_BIN) ./files/uvol.defaults $(1)/etc/uci-defaults/90-uvol-restore-uci
 +endef
 +
 +$(eval $(call BuildPackage,autopart))
@@ -241,7 +241,7 @@ index 0000000000..870cd44156
 +exit 0
 diff --git a/package/system/uvol/files/common.sh b/package/system/uvol/files/common.sh
 new file mode 100644
-index 0000000000..8306477720
+index 0000000000..e3b554e180
 --- /dev/null
 +++ b/package/system/uvol/files/common.sh
 @@ -0,0 +1,83 @@
@@ -270,8 +270,8 @@ index 0000000000..8306477720
 +	uuid="${uuid:5}"
 +
 +	case "$uciname" in
-+		"_meta")
-+			target="/var/run/uvol/.meta"
++		"_uxc")
++			target="/var/state/uxc"
 +			;;
 +		"_"*)
 +			return 1
@@ -297,7 +297,7 @@ index 0000000000..8306477720
 +	local volname="$1"
 +	local uciname
 +
-+	uciname="${volname//[-.]/_}"
++	uciname="${volname//-/_}"
 +	uciname="${uciname//[!([:alnum:]_)]}"
 +	if [ -e "${UCI_SPOOLDIR}/add-$1" ]; then
 +		rm "${UCI_SPOOLDIR}/add-$1"
@@ -330,10 +330,10 @@ index 0000000000..8306477720
 +}
 diff --git a/package/system/uvol/files/lvm.sh b/package/system/uvol/files/lvm.sh
 new file mode 100644
-index 0000000000..c7e93f13f2
+index 0000000000..95281194ba
 --- /dev/null
 +++ b/package/system/uvol/files/lvm.sh
-@@ -0,0 +1,459 @@
+@@ -0,0 +1,435 @@
 +#!/bin/sh
 +
 +cmd="$1"
@@ -398,12 +398,8 @@ index 0000000000..c7e93f13f2
 +
 +vg_name=
 +exportpv() {
-+	vg_name=
-+	config_load fstab
-+	local uvolsect="$(config_foreach echo uvol)"
-+	[ -n "$uvolsect" ] && config_get vg_name "$uvolsect" vg_name
-+	[ -n "$vg_name" ] && return
 +	local reports rep pv pvs
++	vg_name=
 +	json_init
 +	json_load "$(pvs -o vg_name -S "pv_name=~^/dev/$rootdev.*\$")"
 +	json_select report
@@ -492,7 +488,7 @@ index 0000000000..c7e93f13f2
 +	for dms in /sys/devices/virtual/block/dm-* ; do
 +		[ "$dms" = "/sys/devices/virtual/block/dm-*" ] && break
 +		read -r dm_name < "$dms/dm/name"
-+		[ "$(basename "$lv_dm_path")" = "$dm_name" ] && basename "$dms"
++		[ $(basename "$lv_dm_path") = "$dm_name" ] && echo "$(basename "$dms")"
 +	done
 +}
 +
@@ -538,7 +534,7 @@ index 0000000000..c7e93f13f2
 +		*)
 +			[ "$lv_active" = "active" ] || return 0
 +			devname="$(getdev "$1")"
-+			[ "$devname" ] && umount "/dev/$devname"
++			[ "$devname" ] && /sbin/block umount "$devname"
 +			lvm_cmd lvchange -a n "$lv_full_name"
 +			lvm_cmd lvchange -k y "$lv_full_name" || return $?
 +			return 0
@@ -635,12 +631,7 @@ index 0000000000..c7e93f13f2
 +}
 +
 +listvols() {
-+	local reports rep lv lvs lv_name lv_size lv_mode volname json_output json_notfirst
-+	if [ "$1" = "-j" ]; then
-+		json_output=1
-+		echo "["
-+		shift
-+	fi
++	local reports rep lv lvs lv_name lv_size lv_mode volname
 +	volname=${1:-.*}
 +	json_init
 +	json_load "$(lvs -o lv_name,lv_size -S "lv_name=~^[rw][owp]_$volname\$ && vg_name=$vg_name")"
@@ -656,32 +647,17 @@ index 0000000000..c7e93f13f2
 +			lv_mode="${lv_name:0:2}"
 +			lv_name="${lv_name:3}"
 +			lv_size=${lv_size%B}
-+			[ "${lv_name:0:1}" = "." ] && continue
-+			if [ "$json_output" = "1" ]; then
-+				[ "$json_notfirst" = "1" ] && echo ","
-+				echo -e "\t{"
-+				echo -e "\t\t\"name\": \"$lv_name\","
-+				echo -e "\t\t\"mode\": \"$lv_mode\","
-+				echo -e "\t\t\"size\": $lv_size"
-+				echo -n -e "\t}"
-+				json_notfirst=1
-+			else
-+				echo "$lv_name $lv_mode $lv_size"
-+			fi
++			echo "$lv_name $lv_mode $lv_size"
 +			json_select ..
 +		done
 +		json_select ..
 +		break
 +	done
-+
-+	if [ "$json_output" = "1" ]; then
-+		[ "$json_notfirst" = "1" ] && echo
-+		echo "]"
-+	fi
 +}
 +
++
 +detect() {
-+	local reports rep lv lvs lv_name lv_full_name lv_mode volname devname
++	local reports rep lv lvs lv_name lv_full_name lv_mode volname devname lv_skip_activation
 +	local temp_up=""
 +
 +	json_init
@@ -795,10 +771,10 @@ index 0000000000..c7e93f13f2
 +esac
 diff --git a/package/system/uvol/files/ubi.sh b/package/system/uvol/files/ubi.sh
 new file mode 100644
-index 0000000000..7637fba682
+index 0000000000..b0b363d7ed
 --- /dev/null
 +++ b/package/system/uvol/files/ubi.sh
-@@ -0,0 +1,358 @@
+@@ -0,0 +1,337 @@
 +#!/bin/sh
 +
 +cmd="$1"
@@ -969,12 +945,12 @@ index 0000000000..7637fba682
 +	vol_is_mode "$voldev" wo && return 22
 +	vol_is_mode "$voldev" wp && return 16
 +	if vol_is_mode "$voldev" ro; then
-+		grep -q "^/dev/ubiblock${voldev:3}" /proc/self/mounts && umount "/dev/ubiblock${voldev:3}"
++		/sbin/block umount "ubiblock${voldev:3}"
 +		ubiblock --remove "/dev/$voldev"
 +		ubirename "/dev/$ubidev" "uvol-ro-$1" "uvol-rd-$1" || return $?
 +		return 0
 +	elif vol_is_mode "$voldev" rw; then
-+		umount "/dev/$voldev"
++		/sbin/block umount "$voldev"
 +		ubirename "/dev/$ubidev" "uvol-rw-$1" "uvol-wd-$1" || return $?
 +		block_hotplug remove "$voldev"
 +		return 0
@@ -995,12 +971,7 @@ index 0000000000..7637fba682
 +}
 +
 +listvols() {
-+	local volname volmode volsize json_output json_notfirst
-+	if [ "$1" = "-j" ]; then
-+		json_output=1
-+		shift
-+		echo "["
-+	fi
++	local volname volmode volsize
 +	for voldir in "/sys/devices/virtual/ubi/${ubidev}/${ubidev}_"*; do
 +		read -r volname < "$voldir/name"
 +		case "$volname" in
@@ -1013,24 +984,8 @@ index 0000000000..7637fba682
 +		esac
 +		volmode="${volname:5:2}"
 +		volname="${volname:8}"
-+		[ "${volname:0:1}" = "." ] && continue
-+		if [ "$json_output" = "1" ]; then
-+			[ "$json_notfirst" = "1" ] && echo ","
-+				echo -e "\t{"
-+				echo -e "\t\t\"name\": \"$volname\","
-+				echo -e "\t\t\"mode\": \"$volmode\","
-+				echo -e "\t\t\"size\": $volsize"
-+				echo -n -e "\t}"
-+				json_notfirst=1
-+		else
-+			echo "$volname $volmode $volsize"
-+		fi
++		echo "$volname $volmode $volsize"
 +	done
-+
-+	if [ "$json_output" = "1" ]; then
-+		[ "$json_notfirst" = "1" ] && echo
-+		echo "]"
-+	fi
 +}
 +
 +bootvols() {
@@ -1217,27 +1172,13 @@ index 0000000000..4ecd2e165a
 +flock -x /tmp/run/uvol.lock "$uvol_backend" "$@"
 diff --git a/package/system/uvol/files/uvol.defaults b/package/system/uvol/files/uvol.defaults
 new file mode 100644
-index 0000000000..e71135f7a8
+index 0000000000..cbd53a3e4e
 --- /dev/null
 +++ b/package/system/uvol/files/uvol.defaults
-@@ -0,0 +1,17 @@
+@@ -0,0 +1,3 @@
 +#!/bin/sh
 +
-+uvol_init() {
-+	local metasz freesz totalsz
-+	uvol detect
-+	metasz="$(uvol size .meta 2>/dev/null)"
-+	[ "$((metasz))" -gt 0 ] && return
-+	totalsz="$(uvol total)"
-+	freesz="$(uvol free)"
-+	metasz="$((totalsz / 10240))"
-+	[ "$metasz" -lt 4194304 ] && metasz=4194304
-+	[ "$metasz" -gt "$freesz" ] && return
-+	uvol create .meta "$metasz" rw
-+	uvol up .meta
-+}
-+
-+uci -q get fstab.@uvol[0].initialized >/dev/null || uvol_init
++uci -q get fstab.@uvol[0].initialized >/dev/null || uvol detect || true
 diff --git a/package/system/uvol/files/uvol.init b/package/system/uvol/files/uvol.init
 new file mode 100644
 index 0000000000..1f6e2aac08

config.yml

@@ -1,16 +1,8 @@
 repo:  https://github.com/openwrt/openwrt.git
 branch: openwrt-21.02
-revision: c67509efd7d0c43eb3f622f06c8a31aa28d22f6e
+revision: 378769b5551714ccaa821b481bfeecbf362f351e
 output_dir: ./output
 
 patch_folders:
-  - patches/backports/
-  - patches/base
-  - patches/wifi
-  - patches/ath79
-  - patches/ramips
-  - patches/ipq40xx
-  - patches/ipq806x
-  - patches/ipq807x
-  - patches/rest
-  - patches/x86
+  - backports/
+  - patches/

docker/Dockerfile

@@ -3,7 +3,7 @@ FROM ubuntu:20.04
 RUN apt-get update \
     && DEBIAN_FRONTEND="noninteractive" apt-get -y install tzdata \
     && apt-get install -y \
-            time git-core build-essential gcc-multilib clang \
+            time git-core build-essential gcc-multilib \
             libncurses5-dev zlib1g-dev gawk flex gettext wget unzip python \
             python3 python3-pip python3-yaml libssl-dev rsync \
     && apt-get clean

feeds/bluetooth-cc2652/ble_scan/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ble_scan
-PKG_VERSION:=1.0
-PKG_BUILD_DIR:= $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ble_scan
-	SECTION:=base
-	CATEGORY:=Utilities
-	TITLE:=ble_scan
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/ble_scan/install
-	$(INSTALL_DIR) $(1)/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ble_scan $(1)/bin/
-endef
-
-define Package/ble_scan/extra_provides
-    echo "libc.so.6";
-endef
-
-$(eval $(call BuildPackage,ble_scan))

feeds/bluetooth-cc2652/ble_scan/src/Makefile

@@ -1,47 +0,0 @@
-#all: ble_scan
-#ble_scan: ble_scan.o
-#	$(CC) $(LDFLAGS) ble_scan.o -o ble_scan
-#blescan.o: ble_scan.c
-#	$(CC) $(CFLAGS) -c ble_scan.c
-#clean:
-#	rm *.o ble_scan
-
-#
-#
-# Author: Teunis van Beelen
-#
-# email: teuniz@protonmail.com
-#
-#
-
-#CROSS-COMPILE:=../../../../../qsdk/staging_dir/toolchain-arm/bin/arm-openwrt-linux-
-#CC:=$(CROSS-COMPILE)gcc
-
-CC = gcc
-CFLAGS = -Wall -Wextra -Wshadow -Wformat-nonliteral -Wformat-security -Wtype-limits -O2
-
-objects = rs232.o
-
-all: ble_scan
-
-ble_scan : $(objects) ble_scan.o
-	$(CC) $(CFLAGS) $(objects) ble_scan.o -o ble_scan
-
-ble_scan.o : ble_scan.c rs232.h
-	$(CC) $(CFLAGS) -c ble_scan.c -o ble_scan.o
-
-rs232.o : rs232.h rs232.c
-	$(CC) $(CFLAGS) -c rs232.c -o rs232.o
-
-clean :
-	$(RM) ble_scan $(objects) ble_scan.o
-
-#
-#
-#
-#
-
-
-
-
-

feeds/bluetooth-cc2652/ble_scan/src/ble_scan.c

@@ -1,387 +0,0 @@
-
-/**************************************************
-
-file: ble_scan.c
-purpose: Send HCI command to do BLE scan
-
-compile with the command: gcc ble_scan.c rs232.c -Wall -Wextra -o2 -o ble_scan
-
-**************************************************/
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <time.h>
-#ifdef _WIN32
-#include <Windows.h>
-#else
-#include <unistd.h>
-#endif
-
-#include "rs232.h"
-
-#define TX 0
-#define RX 1
-#define BUF_SIZE 4095
-#define FULL_BUF_SIZE BUF_SIZE*4
-
-//#define DEBUG
-
-#ifdef DEBUG
-#else
-#endif
-
-int print_hex(int mode, unsigned char *buf, int size);
-int rx_pkt_parser(unsigned char *buf, int size);
-
-
-struct rx_packet_h{
-	unsigned char rxType;
-	unsigned char rxEventCode;
-  unsigned char rxDataLen;
-	unsigned char Event[2];
-	unsigned char Status;
-};
-
-struct event_cmd_st_h{
-	unsigned char OpCode[2];
-	unsigned char DataLength;
-};
-
-struct event_scn_evnt_rep_h{
-  unsigned char EventId[4];
-	unsigned char AdvRptEventType;
-	unsigned char AddressType;
-	unsigned char Address[6];
-	unsigned char PrimaryPHY;
-	unsigned char SecondaryPHY;
-	unsigned char AdvSid;
-	unsigned char TxPower;
-	unsigned char RSSI;
-	unsigned char DirectAddrType;
-	unsigned char DirectAddr[6];
-	unsigned char PeriodicAdvInt[2];
-	unsigned char DataLength[2];
-	//unsigned char *DataPtr;
-};
-
-
-
-int main()
-{
-  int cport_nr,bdrate,n;
-	//cport_nr=0,        /* /dev/ttyS0 (COM1 on windows) */
-	//bdrate=9600;       /* 9600 baud */
-	cport_nr=39,          /*  (ttyMSM1 : 39) */
-	bdrate=115200;       /* 115200 baud */
-#ifdef DEBUG
-	clock_t t;
-#endif
-  char mode[]={'8','N','1',0};
-
-  unsigned char buf[BUF_SIZE];
-  unsigned char full_buf[FULL_BUF_SIZE];
-  int full_buf_ptr = 0;
-  unsigned char HCIExt_ResetSystemCmd[] = {0x01, 0x1D, 0xFC, 0x01, 0x00 };
-  int HCIExt_ResetSystemCmd_length = 5;
-
-  unsigned char GAP_DeviceInitCmd[] = {0x01, 0x00, 0xFE, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-  int GAP_DeviceInitCmd_length = 12;
-
-  unsigned char GapScan_enableCmd[] = {0x01, 0x51, 0xFE, 0x06, 0x00, 0x00, 0xF4, 0x01, 0x28, 0x00 };
-  int GapScan_enableCmd_length = 10;
-
-  if(RS232_OpenComport(cport_nr, bdrate, mode, 0))
-  {
-    printf("Can not open comport\n");
-
-    return(0);
-  }
-
-  RS232_flushRXTX(cport_nr);
-
-  // send reset command
-#ifdef DEBUG
-  t=clock();
-  print_hex(TX, HCIExt_ResetSystemCmd, HCIExt_ResetSystemCmd_length);
-  t=clock()-t;
-  printf("t=%ld\n",t);  //60 
-#else
-  /* sleep for 60ms */
-    usleep(60000);
-#endif
-
-
-  RS232_SendBuf(cport_nr, HCIExt_ResetSystemCmd, HCIExt_ResetSystemCmd_length);
-  /* sleep for 1 Second */
-#ifdef DEBUG
-  t=clock();
-#endif
-  usleep(1000000);
-#ifdef DEBUG
-  t=clock()-t;
-  printf("CLOCKS_PER_SEC=%ld\n",t);
-#endif
-  n = RS232_PollComport(cport_nr, buf, BUF_SIZE);
-
-#ifdef DEBUG
-  t=clock();
-  print_hex(RX, buf, n);
-  t=clock()-t;
-  printf("t=%ld\n",t);
-#else
-  /* sleep for 300ms */
-    usleep(300000);
-#endif
-
-
-
-	// send device initial command
-#ifdef DEBUG
-  t=clock();
-  print_hex(TX, GAP_DeviceInitCmd, GAP_DeviceInitCmd_length);
-  t=clock()-t;
-  printf("t=%ld\n",t);
-#else
-  /* sleep for 250 ms */
-    usleep(250000);
-#endif
-
-
-
-  RS232_SendBuf(cport_nr, GAP_DeviceInitCmd, GAP_DeviceInitCmd_length);
-/* sleep for 0.5 Second */
-    usleep(500000);
-
-  n = RS232_PollComport(cport_nr, buf, BUF_SIZE);
-
-#ifdef DEBUG
-  t=clock();
-  print_hex(RX, buf, n);
-  t=clock()-t;
-  printf("t=%ld\n",t);
-#else
-  /* sleep for 500 ms */
-    usleep(500000);
-#endif
-
-
-  // send scan command
-#ifdef DEBUG
-  t=clock();
-  print_hex(TX, GapScan_enableCmd, GapScan_enableCmd_length);
-  t=clock()-t;
-  printf("t=%ld\n",t);
-#else
-  /* sleep for 30ms */
-    usleep(30000);
-#endif
-
-
-  RS232_SendBuf(cport_nr, GapScan_enableCmd, GapScan_enableCmd_length);
-
-	//read scan respone
-	while (n > 0)
-	{
-	/* sleep for 400 mS */
-      usleep(400000);
-
-	  n = RS232_PollComport(cport_nr, buf, BUF_SIZE);
-#ifdef DEBUG
-  t=clock();
-  print_hex(RX, buf, n); 
-  t=clock()-t;
-  printf("t=%ld\n",t);
-#endif
-		
-		if (full_buf_ptr+n>FULL_BUF_SIZE)
-		{
-#ifdef DEBUG
-			printf("buffer full. break.\n");
-#endif
-			break;
-		}
-		memcpy(full_buf+full_buf_ptr, buf, n);
-		full_buf_ptr+=n;
-
-#ifdef DEBUG
-		printf("n:%d, full_buf_ptr:%d\n",n, full_buf_ptr);
-#endif
-	}
-#ifdef DEBUG
-  print_hex(RX, full_buf, full_buf_ptr);
-#endif
-  rx_pkt_parser( full_buf, full_buf_ptr);
-#ifdef DEBUG
-	printf("n:%d, full_buf_ptr:%d\n",n, full_buf_ptr);
-#endif
-	RS232_flushRXTX(cport_nr);
-	RS232_CloseComport(cport_nr);
-  return(0);
-}
-/**************************************************
-Print buffer in HEX
-**************************************************/
-int print_hex(int mode, unsigned char *buf, int size)
-{
-
-	int ii,jj;
-
-	if (mode == TX)
-		printf("TX: ");
-	else
-		printf("RX: ");
-
-	for(ii=0,jj=0; ii < size; ii++,jj++)
-	{
-		printf("%02X ",buf[ii]);
-		if (jj==15)
-		{
-				printf("\n");
-				jj = 0;
-		}
-	}
-	printf("\n");
-
-	return(0);
-}
-
-
-int rx_pkt_parser(unsigned char *buf, int size)
-{
-	int pkt_index=0;
-	int pkt_size=0;
-	int temp_event=0;
-	int temp_EventId=0;
-	int total_device_count=0;
-	char szAddress[18];
-	struct rx_packet_h *rx_packet;
-	struct event_scn_evnt_rep_h *event_scn_evnt_rep;
-#ifdef DEBUG
-	int dump_i=0;
-	unsigned char *pkt_ptr;
-#endif
-	if(size<=0){printf("size error\n");return -1;}
-
-	printf("BLE scan start:\n");
-	rx_packet = (struct rx_packet_h *)(buf);
-
-	while(pkt_index<size)
-	{
-#ifdef DEBUG
-		printf("--------------------------------------------------------------------\n");
-		printf("-Type           : 0x%02X (%s)\n",rx_packet->rxType,rx_packet->rxType==0x4?"Event":"Unknown");
-
-		if(rx_packet->rxType!=0x4)
-		{
-			printf(" Type unknown, rxType:0x%02X, pkt_index:%d\n",rx_packet->rxType,pkt_index);
-		}
-
-		printf("-EventCode      : 0x%02X (%s)\n",rx_packet->rxEventCode,rx_packet->rxEventCode==0xff?"HCI_LE_ExtEvent":"Unknown");
-		if(rx_packet->rxEventCode!=0xff)
-		{
-			printf(" EventCode unknown, rxEventCode:0x%02X, pkt_index:%d\n",rx_packet->rxEventCode,pkt_index);
-		}
-
-		printf("-Data Length    : 0x%02X (%d) bytes(s)\n",rx_packet->rxDataLen,rx_packet->rxDataLen);
-#endif
-		temp_event = (rx_packet->Event[1]<<8)+rx_packet->Event[0] ;
-#ifdef DEBUG
-		printf(" Event          : 0x%02X%02X (%d) ",rx_packet->Event[1],rx_packet->Event[0],temp_event);
-		if(temp_event==0x067F)
-		{
-			printf("(GAP_HCI_ExtentionCommandStatus)\n");
-		}
-		else if(temp_event==0x0600)
-		{
-			printf("(GAP_DeviceInitDone)\n");
-		}
-		else if(temp_event==0x0613)
-		{
-			printf("(GAP_AdvertiserScannerEvent)\n");
-		}
-		else 
-		{
-			printf(" Event unknown, Event:0x%04X, pkt_index:%d\n",temp_event,pkt_index);
-		}
-		
-		printf(" Status         : 0x%02X (%d) (%s)\n",rx_packet->Status,rx_packet->Status,rx_packet->Status==0?"SUCCESS":"FAIL");
-#endif
-
-		if(temp_event==0x0613)
-		{
-			event_scn_evnt_rep = (struct event_scn_evnt_rep_h *)(&(rx_packet->Status) + 1);
-			temp_EventId = (event_scn_evnt_rep->EventId[3]<<24) + (event_scn_evnt_rep->EventId[2]<<16) +
-			               (event_scn_evnt_rep->EventId[1]<<8) + (event_scn_evnt_rep->EventId[0]) ;
-#ifdef DEBUG
-			printf(" EventId        : 0x%02X%02X%02X%02X (%d) ", event_scn_evnt_rep->EventId[3],
-																																	event_scn_evnt_rep->EventId[2],
-																																	event_scn_evnt_rep->EventId[1],
-																																	event_scn_evnt_rep->EventId[0],temp_EventId);
-
-			if(temp_EventId==0x00010000)
-			{
-				printf("(GAP_EVT_SCAN_ENABLED)\n");
-			}
-			else if(temp_EventId==0x00020000)
-			{
-				printf("(GAP_EVT_SCAN_DISABLED)\n");
-			}
-			else if(temp_EventId==0x00400000)
-			{
-				printf("(GAP_EVT_ADV_REPORT)\n");
-			}
-			else
-			{
-				printf(" EventId unknown, EventId:0x%08X, pkt_index:%d\n",temp_EventId,pkt_index);
-			}
-#endif
-			if(temp_EventId==0x00400000)
-			{
-				sprintf(szAddress,"%02X:%02X:%02X:%02X:%02X:%02X", event_scn_evnt_rep->Address[5],
-																																	event_scn_evnt_rep->Address[4],
-																																	event_scn_evnt_rep->Address[3],
-																																	event_scn_evnt_rep->Address[2],
-																																	event_scn_evnt_rep->Address[1],
-																																	event_scn_evnt_rep->Address[0]);
-#ifdef DEBUG
-				printf("%04d", total_device_count);
-				printf(" Address        : %s", szAddress);
-				printf(" RSSI           : 0x%02X (%d)(%d)",event_scn_evnt_rep->RSSI,event_scn_evnt_rep->RSSI,event_scn_evnt_rep->RSSI-256);
-#else
-				printf(" Address: %s RSSI: %d", szAddress, event_scn_evnt_rep->RSSI-256);
-#endif
-				printf("\n");
-				total_device_count++;
-			}
-		}
-
-
-		pkt_size = 3+rx_packet->rxDataLen;
-
-#ifdef DEBUG
-		pkt_ptr = (unsigned char *)rx_packet;
-		printf(" <Info   > Dump(Rx):");
-		for(dump_i=0; dump_i < pkt_size; dump_i++)
-		{
-			if (dump_i%16==0)
-			{
-					printf("\n");
-					printf("%04x:",dump_i);
-			}
-			printf("%02X ",pkt_ptr[dump_i]);
-		}
-		printf("\n");
-#endif
-		
-		pkt_index+=pkt_size;
-#ifdef DEBUG
-		printf(" pkt_size:%d, pkt_index:%d\n",pkt_size,pkt_index);
-#endif
-		rx_packet = (struct rx_packet_h *)(&(rx_packet->rxDataLen) + rx_packet->rxDataLen + 1);
-
-	}
-	printf("Total: %d Device found.\n",total_device_count);
-	return 0;
-}
-
-

feeds/bluetooth-cc2652/ble_scan/src/rs232.c

@@ -1,879 +0,0 @@
-/*
-***************************************************************************
-*
-* Author: Teunis van Beelen
-*
-* Copyright (C) 2005 - 2021 Teunis van Beelen
-*
-* Email: teuniz@protonmail.com
-*
-***************************************************************************
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*
-***************************************************************************
-*/
-
-
-/* Last revision: February 9, 2021 */
-/* For more info and how to use this library, visit: http://www.teuniz.net/RS-232/ */
-
-
-#include "rs232.h"
-
-
-#if defined(__linux__) || defined(__FreeBSD__)   /* Linux & FreeBSD */
-
-#define RS232_PORTNR  40
-
-
-int Cport[RS232_PORTNR],
-    error;
-
-struct termios new_port_settings,
-       old_port_settings[RS232_PORTNR];
-
-const char *comports[RS232_PORTNR]={"/dev/ttyS0","/dev/ttyS1","/dev/ttyS2","/dev/ttyS3","/dev/ttyS4","/dev/ttyS5",
-                                    "/dev/ttyS6","/dev/ttyS7","/dev/ttyS8","/dev/ttyS9","/dev/ttyS10","/dev/ttyS11",
-                                    "/dev/ttyS12","/dev/ttyS13","/dev/ttyS14","/dev/ttyS15","/dev/ttyUSB0",
-                                    "/dev/ttyUSB1","/dev/ttyUSB2","/dev/ttyUSB3","/dev/ttyUSB4","/dev/ttyUSB5",
-                                    "/dev/ttyAMA0","/dev/ttyAMA1","/dev/ttyACM0","/dev/ttyACM1",
-                                    "/dev/rfcomm0","/dev/rfcomm1","/dev/ircomm0","/dev/ircomm1",
-                                    "/dev/cuau0","/dev/cuau1","/dev/cuau2","/dev/cuau3",
-                                    "/dev/cuaU0","/dev/cuaU1","/dev/cuaU2","/dev/cuaU3",
-                                    "/dev/ttyMSM0","/dev/ttyMSM1"};
-int RS232_OpenComport(int comport_number, int baudrate, const char *mode, int flowctrl)
-{
-  int baudr,
-      status;
-
-  if((comport_number>=RS232_PORTNR)||(comport_number<0))
-  {
-    printf("illegal comport number\n");
-    return(1);
-  }
-
-  switch(baudrate)
-  {
-    case      50 : baudr = B50;
-                   break;
-    case      75 : baudr = B75;
-                   break;
-    case     110 : baudr = B110;
-                   break;
-    case     134 : baudr = B134;
-                   break;
-    case     150 : baudr = B150;
-                   break;
-    case     200 : baudr = B200;
-                   break;
-    case     300 : baudr = B300;
-                   break;
-    case     600 : baudr = B600;
-                   break;
-    case    1200 : baudr = B1200;
-                   break;
-    case    1800 : baudr = B1800;
-                   break;
-    case    2400 : baudr = B2400;
-                   break;
-    case    4800 : baudr = B4800;
-                   break;
-    case    9600 : baudr = B9600;
-                   break;
-    case   19200 : baudr = B19200;
-                   break;
-    case   38400 : baudr = B38400;
-                   break;
-    case   57600 : baudr = B57600;
-                   break;
-    case  115200 : baudr = B115200;
-                   break;
-    case  230400 : baudr = B230400;
-                   break;
-    case  460800 : baudr = B460800;
-                   break;
-#if defined(__linux__)
-    case  500000 : baudr = B500000;
-                   break;
-    case  576000 : baudr = B576000;
-                   break;
-    case  921600 : baudr = B921600;
-                   break;
-    case 1000000 : baudr = B1000000;
-                   break;
-    case 1152000 : baudr = B1152000;
-                   break;
-    case 1500000 : baudr = B1500000;
-                   break;
-    case 2000000 : baudr = B2000000;
-                   break;
-    case 2500000 : baudr = B2500000;
-                   break;
-    case 3000000 : baudr = B3000000;
-                   break;
-    case 3500000 : baudr = B3500000;
-                   break;
-    case 4000000 : baudr = B4000000;
-                   break;
-#endif
-    default      : printf("invalid baudrate\n");
-                   return(1);
-                   break;
-  }
-
-  int cbits=CS8,
-      cpar=0,
-      ipar=IGNPAR,
-      bstop=0;
-
-  if(strlen(mode) != 3)
-  {
-    printf("invalid mode \"%s\"\n", mode);
-    return(1);
-  }
-
-  switch(mode[0])
-  {
-    case '8': cbits = CS8;
-              break;
-    case '7': cbits = CS7;
-              break;
-    case '6': cbits = CS6;
-              break;
-    case '5': cbits = CS5;
-              break;
-    default : printf("invalid number of data-bits '%c'\n", mode[0]);
-              return(1);
-              break;
-  }
-
-  switch(mode[1])
-  {
-    case 'N':
-    case 'n': cpar = 0;
-              ipar = IGNPAR;
-              break;
-    case 'E':
-    case 'e': cpar = PARENB;
-              ipar = INPCK;
-              break;
-    case 'O':
-    case 'o': cpar = (PARENB | PARODD);
-              ipar = INPCK;
-              break;
-    default : printf("invalid parity '%c'\n", mode[1]);
-              return(1);
-              break;
-  }
-
-  switch(mode[2])
-  {
-    case '1': bstop = 0;
-              break;
-    case '2': bstop = CSTOPB;
-              break;
-    default : printf("invalid number of stop bits '%c'\n", mode[2]);
-              return(1);
-              break;
-  }
-
-/*
-http://pubs.opengroup.org/onlinepubs/7908799/xsh/termios.h.html
-
-http://man7.org/linux/man-pages/man3/termios.3.html
-*/
-
-  Cport[comport_number] = open(comports[comport_number], O_RDWR | O_NOCTTY | O_NDELAY);
-  if(Cport[comport_number]==-1)
-  {
-    perror("unable to open comport ");
-    return(1);
-  }
-
-  /* lock access so that another process can't also use the port */
-  if(flock(Cport[comport_number], LOCK_EX | LOCK_NB) != 0)
-  {
-    close(Cport[comport_number]);
-    perror("Another process has locked the comport.");
-    return(1);
-  }
-
-  error = tcgetattr(Cport[comport_number], old_port_settings + comport_number);
-  if(error==-1)
-  {
-    close(Cport[comport_number]);
-    flock(Cport[comport_number], LOCK_UN);  /* free the port so that others can use it. */
-    perror("unable to read portsettings ");
-    return(1);
-  }
-  memset(&new_port_settings, 0, sizeof(new_port_settings));  /* clear the new struct */
-
-  new_port_settings.c_cflag = cbits | cpar | bstop | CLOCAL | CREAD;
-  if(flowctrl)
-  {
-    new_port_settings.c_cflag |= CRTSCTS;
-  }
-  new_port_settings.c_iflag = ipar;
-  new_port_settings.c_oflag = 0;
-  new_port_settings.c_lflag = 0;
-  new_port_settings.c_cc[VMIN] = 0;      /* block untill n bytes are received */
-  new_port_settings.c_cc[VTIME] = 0;     /* block untill a timer expires (n * 100 mSec.) */
-
-  cfsetispeed(&new_port_settings, baudr);
-  cfsetospeed(&new_port_settings, baudr);
-
-  error = tcsetattr(Cport[comport_number], TCSANOW, &new_port_settings);
-  if(error==-1)
-  {
-    tcsetattr(Cport[comport_number], TCSANOW, old_port_settings + comport_number);
-    close(Cport[comport_number]);
-    flock(Cport[comport_number], LOCK_UN);  /* free the port so that others can use it. */
-    perror("unable to adjust portsettings ");
-    return(1);
-  }
-
-/* http://man7.org/linux/man-pages/man4/tty_ioctl.4.html */
-
-  if(ioctl(Cport[comport_number], TIOCMGET, &status) == -1)
-  {
-    tcsetattr(Cport[comport_number], TCSANOW, old_port_settings + comport_number);
-    flock(Cport[comport_number], LOCK_UN);  /* free the port so that others can use it. */
-    perror("unable to get portstatus");
-    return(1);
-  }
-
-  status |= TIOCM_DTR;    /* turn on DTR */
-  status |= TIOCM_RTS;    /* turn on RTS */
-
-  if(ioctl(Cport[comport_number], TIOCMSET, &status) == -1)
-  {
-    tcsetattr(Cport[comport_number], TCSANOW, old_port_settings + comport_number);
-    flock(Cport[comport_number], LOCK_UN);  /* free the port so that others can use it. */
-    perror("unable to set portstatus");
-    return(1);
-  }
-
-  return(0);
-}
-
-
-int RS232_PollComport(int comport_number, unsigned char *buf, int size)
-{
-  int n;
-
-  n = read(Cport[comport_number], buf, size);
-
-  if(n < 0)
-  {
-    if(errno == EAGAIN)  return 0;
-  }
-
-  return(n);
-}
-
-
-int RS232_SendByte(int comport_number, unsigned char byte)
-{
-  int n = write(Cport[comport_number], &byte, 1);
-  if(n < 0)
-  {
-    if(errno == EAGAIN)
-    {
-      return 0;
-    }
-    else
-    {
-      return 1;
-    }
-  }
-
-  return(0);
-}
-
-
-int RS232_SendBuf(int comport_number, unsigned char *buf, int size)
-{
-  int n = write(Cport[comport_number], buf, size);
-  if(n < 0)
-  {
-    if(errno == EAGAIN)
-    {
-      return 0;
-    }
-    else
-    {
-      return -1;
-    }
-  }
-
-  return(n);
-}
-
-
-void RS232_CloseComport(int comport_number)
-{
-  int status;
-
-  if(ioctl(Cport[comport_number], TIOCMGET, &status) == -1)
-  {
-    perror("unable to get portstatus");
-  }
-
-  status &= ~TIOCM_DTR;    /* turn off DTR */
-  status &= ~TIOCM_RTS;    /* turn off RTS */
-
-  if(ioctl(Cport[comport_number], TIOCMSET, &status) == -1)
-  {
-    perror("unable to set portstatus");
-  }
-
-  tcsetattr(Cport[comport_number], TCSANOW, old_port_settings + comport_number);
-  close(Cport[comport_number]);
-
-  flock(Cport[comport_number], LOCK_UN);  /* free the port so that others can use it. */
-}
-
-/*
-Constant  Description
-TIOCM_LE        DSR (data set ready/line enable)
-TIOCM_DTR       DTR (data terminal ready)
-TIOCM_RTS       RTS (request to send)
-TIOCM_ST        Secondary TXD (transmit)
-TIOCM_SR        Secondary RXD (receive)
-TIOCM_CTS       CTS (clear to send)
-TIOCM_CAR       DCD (data carrier detect)
-TIOCM_CD        see TIOCM_CAR
-TIOCM_RNG       RNG (ring)
-TIOCM_RI        see TIOCM_RNG
-TIOCM_DSR       DSR (data set ready)
-
-http://man7.org/linux/man-pages/man4/tty_ioctl.4.html
-*/
-
-int RS232_IsDCDEnabled(int comport_number)
-{
-  int status;
-
-  ioctl(Cport[comport_number], TIOCMGET, &status);
-
-  if(status&TIOCM_CAR) return(1);
-  else return(0);
-}
-
-
-int RS232_IsRINGEnabled(int comport_number)
-{
-  int status;
-
-  ioctl(Cport[comport_number], TIOCMGET, &status);
-
-  if(status&TIOCM_RNG) return(1);
-  else return(0);
-}
-
-
-int RS232_IsCTSEnabled(int comport_number)
-{
-  int status;
-
-  ioctl(Cport[comport_number], TIOCMGET, &status);
-
-  if(status&TIOCM_CTS) return(1);
-  else return(0);
-}
-
-
-int RS232_IsDSREnabled(int comport_number)
-{
-  int status;
-
-  ioctl(Cport[comport_number], TIOCMGET, &status);
-
-  if(status&TIOCM_DSR) return(1);
-  else return(0);
-}
-
-
-void RS232_enableDTR(int comport_number)
-{
-  int status;
-
-  if(ioctl(Cport[comport_number], TIOCMGET, &status) == -1)
-  {
-    perror("unable to get portstatus");
-  }
-
-  status |= TIOCM_DTR;    /* turn on DTR */
-
-  if(ioctl(Cport[comport_number], TIOCMSET, &status) == -1)
-  {
-    perror("unable to set portstatus");
-  }
-}
-
-
-void RS232_disableDTR(int comport_number)
-{
-  int status;
-
-  if(ioctl(Cport[comport_number], TIOCMGET, &status) == -1)
-  {
-    perror("unable to get portstatus");
-  }
-
-  status &= ~TIOCM_DTR;    /* turn off DTR */
-
-  if(ioctl(Cport[comport_number], TIOCMSET, &status) == -1)
-  {
-    perror("unable to set portstatus");
-  }
-}
-
-
-void RS232_enableRTS(int comport_number)
-{
-  int status;
-
-  if(ioctl(Cport[comport_number], TIOCMGET, &status) == -1)
-  {
-    perror("unable to get portstatus");
-  }
-
-  status |= TIOCM_RTS;    /* turn on RTS */
-
-  if(ioctl(Cport[comport_number], TIOCMSET, &status) == -1)
-  {
-    perror("unable to set portstatus");
-  }
-}
-
-
-void RS232_disableRTS(int comport_number)
-{
-  int status;
-
-  if(ioctl(Cport[comport_number], TIOCMGET, &status) == -1)
-  {
-    perror("unable to get portstatus");
-  }
-
-  status &= ~TIOCM_RTS;    /* turn off RTS */
-
-  if(ioctl(Cport[comport_number], TIOCMSET, &status) == -1)
-  {
-    perror("unable to set portstatus");
-  }
-}
-
-
-void RS232_flushRX(int comport_number)
-{
-  tcflush(Cport[comport_number], TCIFLUSH);
-}
-
-
-void RS232_flushTX(int comport_number)
-{
-  tcflush(Cport[comport_number], TCOFLUSH);
-}
-
-
-void RS232_flushRXTX(int comport_number)
-{
-  tcflush(Cport[comport_number], TCIOFLUSH);
-}
-
-
-#else  /* windows */
-
-#define RS232_PORTNR  32
-
-HANDLE Cport[RS232_PORTNR];
-
-
-const char *comports[RS232_PORTNR]={"\\\\.\\COM1",  "\\\\.\\COM2",  "\\\\.\\COM3",  "\\\\.\\COM4",
-                                    "\\\\.\\COM5",  "\\\\.\\COM6",  "\\\\.\\COM7",  "\\\\.\\COM8",
-                                    "\\\\.\\COM9",  "\\\\.\\COM10", "\\\\.\\COM11", "\\\\.\\COM12",
-                                    "\\\\.\\COM13", "\\\\.\\COM14", "\\\\.\\COM15", "\\\\.\\COM16",
-                                    "\\\\.\\COM17", "\\\\.\\COM18", "\\\\.\\COM19", "\\\\.\\COM20",
-                                    "\\\\.\\COM21", "\\\\.\\COM22", "\\\\.\\COM23", "\\\\.\\COM24",
-                                    "\\\\.\\COM25", "\\\\.\\COM26", "\\\\.\\COM27", "\\\\.\\COM28",
-                                    "\\\\.\\COM29", "\\\\.\\COM30", "\\\\.\\COM31", "\\\\.\\COM32"};
-
-char mode_str[128];
-
-
-int RS232_OpenComport(int comport_number, int baudrate, const char *mode, int flowctrl)
-{
-  if((comport_number>=RS232_PORTNR)||(comport_number<0))
-  {
-    printf("illegal comport number\n");
-    return(1);
-  }
-
-  switch(baudrate)
-  {
-    case     110 : strcpy(mode_str, "baud=110");
-                   break;
-    case     300 : strcpy(mode_str, "baud=300");
-                   break;
-    case     600 : strcpy(mode_str, "baud=600");
-                   break;
-    case    1200 : strcpy(mode_str, "baud=1200");
-                   break;
-    case    2400 : strcpy(mode_str, "baud=2400");
-                   break;
-    case    4800 : strcpy(mode_str, "baud=4800");
-                   break;
-    case    9600 : strcpy(mode_str, "baud=9600");
-                   break;
-    case   19200 : strcpy(mode_str, "baud=19200");
-                   break;
-    case   38400 : strcpy(mode_str, "baud=38400");
-                   break;
-    case   57600 : strcpy(mode_str, "baud=57600");
-                   break;
-    case  115200 : strcpy(mode_str, "baud=115200");
-                   break;
-    case  128000 : strcpy(mode_str, "baud=128000");
-                   break;
-    case  256000 : strcpy(mode_str, "baud=256000");
-                   break;
-    case  500000 : strcpy(mode_str, "baud=500000");
-                   break;
-    case  921600 : strcpy(mode_str, "baud=921600");
-                   break;
-    case 1000000 : strcpy(mode_str, "baud=1000000");
-                   break;
-    case 1500000 : strcpy(mode_str, "baud=1500000");
-                   break;
-    case 2000000 : strcpy(mode_str, "baud=2000000");
-                   break;
-    case 3000000 : strcpy(mode_str, "baud=3000000");
-                   break;
-    default      : printf("invalid baudrate\n");
-                   return(1);
-                   break;
-  }
-
-  if(strlen(mode) != 3)
-  {
-    printf("invalid mode \"%s\"\n", mode);
-    return(1);
-  }
-
-  switch(mode[0])
-  {
-    case '8': strcat(mode_str, " data=8");
-              break;
-    case '7': strcat(mode_str, " data=7");
-              break;
-    case '6': strcat(mode_str, " data=6");
-              break;
-    case '5': strcat(mode_str, " data=5");
-              break;
-    default : printf("invalid number of data-bits '%c'\n", mode[0]);
-              return(1);
-              break;
-  }
-
-  switch(mode[1])
-  {
-    case 'N':
-    case 'n': strcat(mode_str, " parity=n");
-              break;
-    case 'E':
-    case 'e': strcat(mode_str, " parity=e");
-              break;
-    case 'O':
-    case 'o': strcat(mode_str, " parity=o");
-              break;
-    default : printf("invalid parity '%c'\n", mode[1]);
-              return(1);
-              break;
-  }
-
-  switch(mode[2])
-  {
-    case '1': strcat(mode_str, " stop=1");
-              break;
-    case '2': strcat(mode_str, " stop=2");
-              break;
-    default : printf("invalid number of stop bits '%c'\n", mode[2]);
-              return(1);
-              break;
-  }
-
-  if(flowctrl)
-  {
-    strcat(mode_str, " xon=off to=off odsr=off dtr=on rts=off");
-  }
-  else
-  {
-    strcat(mode_str, " xon=off to=off odsr=off dtr=on rts=on");
-  }
-
-/*
-http://msdn.microsoft.com/en-us/library/windows/desktop/aa363145%28v=vs.85%29.aspx
-
-http://technet.microsoft.com/en-us/library/cc732236.aspx
-
-https://docs.microsoft.com/en-us/windows/desktop/api/winbase/ns-winbase-_dcb
-*/
-
-  Cport[comport_number] = CreateFileA(comports[comport_number],
-                      GENERIC_READ|GENERIC_WRITE,
-                      0,                          /* no share  */
-                      NULL,                       /* no security */
-                      OPEN_EXISTING,
-                      0,                          /* no threads */
-                      NULL);                      /* no templates */
-
-  if(Cport[comport_number]==INVALID_HANDLE_VALUE)
-  {
-    printf("unable to open comport\n");
-    return(1);
-  }
-
-  DCB port_settings;
-  memset(&port_settings, 0, sizeof(port_settings));  /* clear the new struct  */
-  port_settings.DCBlength = sizeof(port_settings);
-
-  if(!BuildCommDCBA(mode_str, &port_settings))
-  {
-    printf("unable to set comport dcb settings\n");
-    CloseHandle(Cport[comport_number]);
-    return(1);
-  }
-
-  if(flowctrl)
-  {
-    port_settings.fOutxCtsFlow = TRUE;
-    port_settings.fRtsControl = RTS_CONTROL_HANDSHAKE;
-  }
-
-  if(!SetCommState(Cport[comport_number], &port_settings))
-  {
-    printf("unable to set comport cfg settings\n");
-    CloseHandle(Cport[comport_number]);
-    return(1);
-  }
-
-  COMMTIMEOUTS Cptimeouts;
-
-  Cptimeouts.ReadIntervalTimeout         = MAXDWORD;
-  Cptimeouts.ReadTotalTimeoutMultiplier  = 0;
-  Cptimeouts.ReadTotalTimeoutConstant    = 0;
-  Cptimeouts.WriteTotalTimeoutMultiplier = 0;
-  Cptimeouts.WriteTotalTimeoutConstant   = 0;
-
-  if(!SetCommTimeouts(Cport[comport_number], &Cptimeouts))
-  {
-    printf("unable to set comport time-out settings\n");
-    CloseHandle(Cport[comport_number]);
-    return(1);
-  }
-
-  return(0);
-}
-
-
-int RS232_PollComport(int comport_number, unsigned char *buf, int size)
-{
-  int n;
-
-/* added the void pointer cast, otherwise gcc will complain about */
-/* "warning: dereferencing type-punned pointer will break strict aliasing rules" */
-
-  if(!ReadFile(Cport[comport_number], buf, size, (LPDWORD)((void *)&n), NULL))
-  {
-    return -1;
-  }
-
-  return(n);
-}
-
-
-int RS232_SendByte(int comport_number, unsigned char byte)
-{
-  int n;
-
-  if(!WriteFile(Cport[comport_number], &byte, 1, (LPDWORD)((void *)&n), NULL))
-  {
-    return(1);
-  }
-
-  if(n<0)  return(1);
-
-  return(0);
-}
-
-
-int RS232_SendBuf(int comport_number, unsigned char *buf, int size)
-{
-  int n;
-
-  if(WriteFile(Cport[comport_number], buf, size, (LPDWORD)((void *)&n), NULL))
-  {
-    return(n);
-  }
-
-  return(-1);
-}
-
-
-void RS232_CloseComport(int comport_number)
-{
-  CloseHandle(Cport[comport_number]);
-}
-
-/*
-http://msdn.microsoft.com/en-us/library/windows/desktop/aa363258%28v=vs.85%29.aspx
-*/
-
-int RS232_IsDCDEnabled(int comport_number)
-{
-  int status;
-
-  GetCommModemStatus(Cport[comport_number], (LPDWORD)((void *)&status));
-
-  if(status&MS_RLSD_ON) return(1);
-  else return(0);
-}
-
-
-int RS232_IsRINGEnabled(int comport_number)
-{
-  int status;
-
-  GetCommModemStatus(Cport[comport_number], (LPDWORD)((void *)&status));
-
-  if(status&MS_RING_ON) return(1);
-  else return(0);
-}
-
-
-int RS232_IsCTSEnabled(int comport_number)
-{
-  int status;
-
-  GetCommModemStatus(Cport[comport_number], (LPDWORD)((void *)&status));
-
-  if(status&MS_CTS_ON) return(1);
-  else return(0);
-}
-
-
-int RS232_IsDSREnabled(int comport_number)
-{
-  int status;
-
-  GetCommModemStatus(Cport[comport_number], (LPDWORD)((void *)&status));
-
-  if(status&MS_DSR_ON) return(1);
-  else return(0);
-}
-
-
-void RS232_enableDTR(int comport_number)
-{
-  EscapeCommFunction(Cport[comport_number], SETDTR);
-}
-
-
-void RS232_disableDTR(int comport_number)
-{
-  EscapeCommFunction(Cport[comport_number], CLRDTR);
-}
-
-
-void RS232_enableRTS(int comport_number)
-{
-  EscapeCommFunction(Cport[comport_number], SETRTS);
-}
-
-
-void RS232_disableRTS(int comport_number)
-{
-  EscapeCommFunction(Cport[comport_number], CLRRTS);
-}
-
-/*
-https://msdn.microsoft.com/en-us/library/windows/desktop/aa363428%28v=vs.85%29.aspx
-*/
-
-void RS232_flushRX(int comport_number)
-{
-  PurgeComm(Cport[comport_number], PURGE_RXCLEAR | PURGE_RXABORT);
-}
-
-
-void RS232_flushTX(int comport_number)
-{
-  PurgeComm(Cport[comport_number], PURGE_TXCLEAR | PURGE_TXABORT);
-}
-
-
-void RS232_flushRXTX(int comport_number)
-{
-  PurgeComm(Cport[comport_number], PURGE_RXCLEAR | PURGE_RXABORT);
-  PurgeComm(Cport[comport_number], PURGE_TXCLEAR | PURGE_TXABORT);
-}
-
-
-#endif
-
-
-void RS232_cputs(int comport_number, const char *text)  /* sends a string to serial port */
-{
-  while(*text != 0)   RS232_SendByte(comport_number, *(text++));
-}
-
-
-/* return index in comports matching to device name or -1 if not found */
-int RS232_GetPortnr(const char *devname)
-{
-  int i;
-
-  char str[32];
-
-#if defined(__linux__) || defined(__FreeBSD__)   /* Linux & FreeBSD */
-  strcpy(str, "/dev/");
-#else  /* windows */
-  strcpy(str, "\\\\.\\");
-#endif
-  strncat(str, devname, 16);
-  str[31] = 0;
-
-  for(i=0; i<RS232_PORTNR; i++)
-  {
-    if(!strcmp(comports[i], str))
-    {
-      return i;
-    }
-  }
-
-  return -1;  /* device not found */
-}
-
-
-
-
-
-
-
-
-
-
-

feeds/bluetooth-cc2652/ble_scan/src/rs232.h

@@ -1,85 +0,0 @@
-/*
-***************************************************************************
-*
-* Author: Teunis van Beelen
-*
-* Copyright (C) 2005 - 2021 Teunis van Beelen
-*
-* Email: teuniz@protonmail.com
-*
-***************************************************************************
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*
-***************************************************************************
-*/
-
-/* For more info and how to use this library, visit: http://www.teuniz.net/RS-232/ */
-
-
-#ifndef rs232_INCLUDED
-#define rs232_INCLUDED
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdio.h>
-#include <string.h>
-
-
-
-#if defined(__linux__) || defined(__FreeBSD__)
-
-#include <termios.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <limits.h>
-#include <sys/file.h>
-#include <errno.h>
-
-#else
-
-#include <windows.h>
-
-#endif
-
-int RS232_OpenComport(int, int, const char *, int);
-int RS232_PollComport(int, unsigned char *, int);
-int RS232_SendByte(int, unsigned char);
-int RS232_SendBuf(int, unsigned char *, int);
-void RS232_CloseComport(int);
-void RS232_cputs(int, const char *);
-int RS232_IsDCDEnabled(int);
-int RS232_IsRINGEnabled(int);
-int RS232_IsCTSEnabled(int);
-int RS232_IsDSREnabled(int);
-void RS232_enableDTR(int);
-void RS232_disableDTR(int);
-void RS232_enableRTS(int);
-void RS232_disableRTS(int);
-void RS232_flushRX(int);
-void RS232_flushTX(int);
-void RS232_flushRXTX(int);
-int RS232_GetPortnr(const char *);
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif
-
-

feeds/bluetooth-cc2652/cc2652/Makefile

@@ -1,37 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=cc2652
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/cc2652
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=cc2652 -- TI CC26x2 firmware upgrade tool 
-	DEPENDS:=+libstdcpp +zlib 
-endef
-
-define Package/cc2652/description
-	TI CC26x2 firmware upgrade tool 
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/cc2652/install
-	$(INSTALL_DIR) $(1)/lib/firmware/cc2562
-	$(INSTALL_BIN) ./files/firmware/* $(1)/lib/firmware/cc2562
-	
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tisbl $(1)/usr/bin/
-	$(INSTALL_BIN) ./files/*.sh $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,cc2652))
-

feeds/bluetooth-cc2652/cc2652/files/cc2562-flash-broadcaster.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-if [ -f /sys/class/gpio/ble_enable/value ]; then
-	echo 1 > /sys/class/gpio/ble_enable/value
-fi
-echo 0 > /sys/class/gpio/ble_backdoor/value
-echo 1 > /sys/class/gpio/ble_reset/value
-echo 0 > /sys/class/gpio/ble_reset/value
-sleep 1
-echo 1 > /sys/class/gpio/ble_reset/value
-sleep 1
-echo 1 > /sys/class/gpio/ble_backdoor/value
-tisbl /dev/ttyMSM1 115200 2652 /lib/firmware/cc2562/simple_broadcaster_bd9.bin 

feeds/bluetooth-cc2652/cc2652/files/cc2562-flash-scanner.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-if [ -f /sys/class/gpio/ble_enable/value ]; then
-	echo 1 > /sys/class/gpio/ble_enable/value
-fi
-echo 0 > /sys/class/gpio/ble_backdoor/value
-echo 1 > /sys/class/gpio/ble_reset/value
-echo 0 > /sys/class/gpio/ble_reset/value
-sleep 1
-echo 1 > /sys/class/gpio/ble_reset/value
-sleep 1
-echo 1 > /sys/class/gpio/ble_backdoor/value
-tisbl /dev/ttyMSM1 115200 2652 /lib/firmware/cc2562/ble5_host_test_bd9.bin 

feeds/bluetooth-cc2652/cc2652/files/cc2562-reset.sh

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-if [ -f /sys/class/gpio/ble_enable/value ]; then
-	echo 1 > /sys/class/gpio/ble_enable/value
-fi
-echo 1 > /sys/class/gpio/ble_backdoor/value
-echo 1 > /sys/class/gpio/ble_reset/value
-sleep 1
-echo 1 > /sys/class/gpio/ble_reset/value
-sleep 1

feeds/bluetooth-cc2652/cc2652/files/cc2562-wr.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-# com-wr.sh tty time command parser
-# example com-wr.sh /dev/ttyMSM1 1 "\x01\x1D\xFC\x01\x00" | hexdump.sh  --> send "\x01\x1D\xFC\x01\x00" to /dev/ttyMSM1 and then hexdump receive data until 100ms timeout
-#command example "\x7E\x03\xD0\xAF und normaler Text" 
-tty=$1
-time=$2
-command=$3
-parser=$4
-stty -F $tty time $time
-exec 99< $tty
-echo -en $command > $tty
-cat $tty
-exec 99<&-

feeds/bluetooth-cc2652/cc2652/files/ibeacon-broadcaster.sh

@@ -1,28 +0,0 @@
-#!/bin/sh
-function iBeconScan() {
-	if [ "$#" -eq 4 ]; then
-		UUID=$1
-		MAJOR=$2
-		MINOR=$3
-		POWER=$4
-	else
-		UUID="\xE2\x0A\x39\xF4\x73\xF5\x4B\xC4\xA1\x2F\x17\xD1\xAD\x07\xA9\x61"
-		MAJOR="\x01\x23"
-		MINOR="\x45\x67"
-		POWER="\xC8"
-	fi	
-
-	cc2562-wr.sh /dev/ttyMSM1 3 "\x01\x1D\xFC\x01\x00" > /dev/null # this command dealy time must >= 3, if small then 3, the following commands  will be something wrong
-	cc2562-wr.sh /dev/ttyMSM1 1 "\x01\x00\xFE\x08\x01\x00\x00\x00\x00\x00\x00\x00" > /dev/null 
-	cc2562-wr.sh /dev/ttyMSM1 1 "\x01\x3E\xFE\x15\x12\x00\xA0\x00\x00\xA0\x00\x00\x07\x00\x00\x00\x00\x00\x00\x00\x00\x7F\x01\x01\x00" > /dev/null
-	cc2562-wr.sh /dev/ttyMSM1 1 "\x09\x44\xFE\x23\x00\x00\x00\x1E\x00\x02\x01\x1A\x1A\xFF\x4C\x00\x02\x15${UUID}${MAJOR}${MINOR}${POWER}\x00" > /dev/null
-	cc2562-wr.sh /dev/ttyMSM1 1 "\x01\x3F\xFE\x04\x00\x00\x00\x00"
-}
-
-cc2562-reset.sh
-
-while true
-do
-        iBeconScan
-        sleep 1
-done

feeds/bluetooth-cc2652/cc2652/src/Makefile

@@ -1,27 +0,0 @@
-# Executable
-EXE    = tisbl
- 
-# Compiler, Linker Defines
-#CC      = g++ 
-#CFLAGS  = -w -O -Wno-deprecated -I. -fpermissive -std=gnu++0x
-#CFLAGS  = -I. -fpermissive -Wwrite-strings -lstdc++
-CFLAGS  = -I. -Wwrite-strings -std=gnu++0x -lstdc++ -fPIC
-#CFLAGS  = -I. -lstdc++ -Wwrite-strings -std=gnu++0x
-#LIBS    = 
-#LDFLAGS = $(LIBS)
- 
-# Compile and Assemble C++ Source Files into Object Files
-%.o: %.cpp
-	$(CXX) $(CFLAGS) $(LDFLAGS) -c $< -o $@
-# Source and Object files
-SRC    = $(wildcard *.cpp)
-OBJ    = $(patsubst %.cpp, %.o, $(SRC))
-	
-# Link all Object Files with external Libraries into Binaries
-$(EXE): $(OBJ)
-	$(CC) $(CFLAGS) $(OBJ) $(LDFLAGS) -o $(EXE)
-#	$(CC) $(CFLAGS) $(OBJ) $(LDFLAGS) -o $(EXE) -lz
- 
-.PHONY: clean
-clean:
-	 -rm -f $(EXE) *.o

feeds/bluetooth-cc2652/cc2652/src/debug.h

@@ -1,13 +0,0 @@
-#ifndef __DEBUG_H__
-#define __DEBUG_H__
-
-#include <stdio.h>
-#define DEBUG 0
-#if defined(DEBUG) && DEBUG > 0
- #define DEBUG_PRINT(fmt, args...) fprintf(stderr, "$$%d:%s:%d:%s():" fmt, \
-    (int)time(NULL), __FILE__, __LINE__, __func__, ##args)
-#else
- #define DEBUG_PRINT(fmt, args...) /* Don't do anything in release builds */
-#endif
-
-#endif // __DEBUG_H__

feeds/bluetooth-cc2652/cc2652/src/sblAppEx.cpp

@@ -1,257 +0,0 @@
-/******************************************************************************
-*  Filename:       sblAppEx.cpp
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader Library application example.
-*                  This example enumerates all COM devices and lets you
-*                  select which port to connect to. The example assumes the
-*                  connected device is a CC2538, CC2650 or CC2652 and programs 
-*                  a blinky onto the device. After programming the blinky, 
-*                  bootloader mode may be forced by 
-*                  - holding SELECT button on 06EB (for CC2538 and CC26x0 EMKs), or
-*                  - holding BTN-1 on the device LaunchPad (for CC26x2 LPs)
-*                  when resetting the chip.
-*
-*  Copyright (C) 2013 - 2019 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include "serialib.h"
-#include "sbllib.h"
-#include <vector>
-#include <iostream>
-#include <fstream>
-
-//#include <time.h>
-
-using namespace std;
-
-// Calculate crc32 checksum the way CC2538 and CC2650 does it.
-int calcCrcLikeChip(const unsigned char *pData, unsigned long ulByteCount)
-{
-    unsigned long d, ind;
-    unsigned long acc = 0xFFFFFFFF;
-    const unsigned long ulCrcRand32Lut[] =
-    {
-        0x00000000, 0x1DB71064, 0x3B6E20C8, 0x26D930AC, 
-        0x76DC4190, 0x6B6B51F4, 0x4DB26158, 0x5005713C, 
-        0xEDB88320, 0xF00F9344, 0xD6D6A3E8, 0xCB61B38C, 
-        0x9B64C2B0, 0x86D3D2D4, 0xA00AE278, 0xBDBDF21C
-    };
-
-    while ( ulByteCount-- )
-    {
-        d = *pData++;
-        ind = (acc & 0x0F) ^ (d & 0x0F);
-        acc = (acc >> 4) ^ ulCrcRand32Lut[ind];
-        ind = (acc & 0x0F) ^ (d >> 4);
-        acc = (acc >> 4) ^ ulCrcRand32Lut[ind];
-    }
-
-    return (acc ^ 0xFFFFFFFF);
-}
-
-/// Application status function (used as SBL status callback)
-void appStatus(char *pcText, bool bError)
-{
-    if(bError)
-    {
-        cerr << pcText;
-    }
-    else
-    {
-        cout << pcText;
-    }
-}
-
-
-/// Application progress function (used as SBL progress callback)
-static void appProgress(uint32_t progress)
-{
-    fprintf(stdout, "\r%d%% ", progress);
-    fflush(stdout);
-}
-
-// Defines
-//		Name							Hex				Dec
-//		-------------------------------	---------------	---------------------------------
-#define DEVICE_CC2538              		0x2538			// 9528
-#define DEVICE_CC26X0                	0x2650			// 9808
-#define DEVICE_CC2640R2              	0x2640			// 9792
-#define DEVICE_CC26X2                	0x2652			// 9810
-#define CC2538_FLASH_BASE            	0x00200000
-#define CC26XX_FLASH_BASE            	0x00000000
-
-// Application main function
-// tisbl SerialDevNode baudRate deviceType firmware 
-int main(int argc, char *argv[])
-{
-    // START: Program Configuration
-    /* UART baud rate. Default: 230400 */
-    uint32_t baudRate = 115200;
-    uint32_t deviceType = DEVICE_CC26X2;
-    SblDevice *pDevice = NULL;          // Pointer to SblDevice object
-    char *SerialDevNode;
-    int32_t devStatus = -1;             // Hold SBL status codes
-    std::string fileName;               // File name to program
-    uint32_t byteCount = 0;             // File size in bytes
-    uint32_t fileCrc, devCrc;           // Variables to save CRC checksum
-    uint32_t devFlashBase;              // Flash start address
-    static std::vector<char> pvWrite(1);// Vector to application firmware in.
-    static std::ifstream file;          // File stream
-
-    // Set callback functions
-    SblDevice::setCallBackStatusFunction(&appStatus);
-    SblDevice::setCallBackProgressFunction(&appProgress);
-
-    // Select device
-	//	deviceType			FlashBase			File	
-	//	DEVICE_CC2538		CC2538_FLASH_BASE	blinky_backdoor_select_btn2538.bin
-	//	DEVICE_CC26X0		CC26XX_FLASH_BASE	blinky_backdoor_select_btn2650.bin
-	//	DEVICE_CC2640R2		CC26XX_FLASH_BASE	blinky_backdoor_select_btn2640r2.bin	
-	//	DEVICE_CC26X2		CC26XX_FLASH_BASE	blinky_backdoor_select_btn26x2.bin	
-	if(argc < 5) {
-		return -1;
-	}	
-	SerialDevNode = argv[1];
-	baudRate = atoi(argv[2]);
-	deviceType = strtol(argv[3], NULL, 16);
-	fileName = argv[4];
-	switch(deviceType)
-	{
-		case DEVICE_CC2538:
-			devFlashBase = CC2538_FLASH_BASE;
-			break;
-		case DEVICE_CC26X0:
-		case DEVICE_CC2640R2:
-		case DEVICE_CC26X2:
-			devFlashBase = CC26XX_FLASH_BASE;
-			break;
-	}
-	printf("SerialDevNode=%s, baudRate=%d, deviceType=%04x, fileName=%s\n",SerialDevNode,baudRate,deviceType,fileName.c_str());
-
-    // Should SBL try to enable XOSC? (Not possible for CC26xx)
-    bool bEnableXosc = false;
-    if(deviceType == DEVICE_CC2538)
-    {
-        char answer[64];
-        cout << "Enable device CC2538 XOSC? (Y/N): ";
-        cin >> answer;
-        bEnableXosc = (answer[0] == 'Y' || answer[0] == 'y') ? true : false;
-    }
-
-    // Create SBL object
-    pDevice = SblDevice::Create(deviceType);
-    if(pDevice == NULL) 
-    { 
-        printf("No SBL device object.\n");
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-
-    // Connect to device
-    printf("Connecting (%s @ %d baud) ...\n", SerialDevNode, baudRate);
-    if(pDevice->connect(SerialDevNode, baudRate, bEnableXosc) != SBL_SUCCESS) 
-    {
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-    
-    // Read file
-    file.open(fileName.c_str(), std::ios::binary);
-    if(file.is_open())
-    {
-        // Get file size:
-        file.seekg(0, std::ios::end);
-        byteCount = (uint32_t)file.tellg();
-        file.seekg(0, std::ios::beg);
-
-        // Read data
-        pvWrite.resize(byteCount);
-        file.read((char*) &pvWrite[0], byteCount);
-    }
-    else   
-    {
-        cout << "Unable to open file " << fileName.c_str();
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-
-    // Calculate file CRC checksum
-    fileCrc = calcCrcLikeChip((unsigned char *)&pvWrite[0], byteCount);
-	
-    if(pDevice->calculateCrc32(devFlashBase, byteCount, &devCrc) != SBL_SUCCESS)
-    {
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-	printf ("pre-Comparing CRC: fileCrc=%x,devCrc=%x\n",fileCrc,devCrc);
-
-    if(fileCrc == devCrc) {
-		cout << "CRC is same, no need to upgrade\n";
-		pDevice->reset();
-		return 0;
-	}	
-
-    // Erasing as much flash needed to program firmware.
-    cout << "Erasing flash ...\n";
-    if(pDevice->eraseFlashRange(devFlashBase, byteCount) != SBL_SUCCESS)
-    {
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-
-    // Writing file to device flash memory.
-    cout << "Writing flash ...\n";
-    if(pDevice->writeFlashRange(devFlashBase, byteCount, &pvWrite[0]) != SBL_SUCCESS)
-    {
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-
-    // Calculate CRC checksum of flashed content.
-    cout << "Calculating CRC on device ...\n";
-    if(pDevice->calculateCrc32(devFlashBase, byteCount, &devCrc) != SBL_SUCCESS)
-    {
-		cout << "\n\nAn error occurred: " << pDevice->getLastStatus();
-		return -1;
-    }
-
-    // Compare CRC checksums
-	printf ("Comparing CRC: fileCrc=%x,devCrc=%x\n",fileCrc,devCrc);
-    if(fileCrc == devCrc) printf("OK\n");
-    else printf("Mismatch!\n");
-
-    cout << "Resetting device ...\n";
-	pDevice->reset();
-    cout << "OK\n";
-
-}

feeds/bluetooth-cc2652/cc2652/src/sbl_device.cpp

@@ -1,673 +0,0 @@
-/******************************************************************************
-*  Filename:       sbl_device.cpp
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader device file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-
-#include <sbllib.h>
-#include "sbl_device.h"
-#include "sbl_device_cc2538.h"
-#include "sbl_device_cc2650.h"
-#include "sbl_device_cc2652.h"
-
-#if 0
-	#include <ComPort.h>
-	#include <ComPortElement.h>
-#else
-	#include "serialib.h"
-#endif
-
-#include <stdarg.h>
-
-// Static  variables
-//
-std::string     SblDevice::sm_csLastError;
-uint32_t        SblDevice::sm_progress = 0;
-tProgressFPTR   SblDevice::sm_pProgressFunction = NULL;
-tStatusFPTR     SblDevice::sm_pStatusFunction = NULL;
-uint32_t        SblDevice::sm_chipType = 0;
-
-//-----------------------------------------------------------------------------
-/** \brief Constructor
-*/
-//-----------------------------------------------------------------------------
-SblDevice::SblDevice()
-{
-    m_pCom = NULL;
-    m_lastDeviceStatus = -1;
-    m_lastSblStatus = SBL_SUCCESS;
-    m_bCommInitialized = false;
-    m_deviceId = 0;
-    m_ramSize = 0;
-    m_flashSize = 0;
-    m_pageEraseSize = 0;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Destructor
-*/
-//-----------------------------------------------------------------------------
-SblDevice::~SblDevice()
-{
-    if (m_pCom != nullptr) 
-    { 
-        delete m_pCom; 
-        m_pCom = nullptr; 
-    }
-
-    m_lastDeviceStatus = -1;
-    m_bCommInitialized = false;
-    m_ramSize = -1;
-    m_flashSize = -1;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Create Serial Bootloader Device
-*
-* \param[in] ui32ChipType
-*      Chip type the object should be created for, e.g. 0x2650 for CC2650.
-*/
-//-----------------------------------------------------------------------------
-/*static*/SblDevice *
-SblDevice::Create(uint32_t ui32ChipType)
-{
-    if (ui32ChipType == 0)
-    {
-        return NULL;
-    }
-
-    sm_chipType = ui32ChipType;
-
-    switch (ui32ChipType)
-    {
-    case 0x2538:
-        return (SblDevice *)new SblDeviceCC2538();
-    case 0x1350:
-    case 0x1310:
-    case 0x2670:
-    case 0x2650:
-    case 0x2640:
-    case 0x2630:
-    case 0x2620:
-        return (SblDevice *)new SblDeviceCC2650();
-    case 0x1312:
-    case 0x1352:
-    case 0x2642:
-    case 0x2652:
-        return (SblDevice *)new SblDeviceCC2652();
-    default:
-        return NULL;
-    }
-}
-
-
-#if 0
-//-----------------------------------------------------------------------------
-/** \brief Enumerate COM port devices
-*
-* \param[in/out]   pComPortElements
-*      Pointer to array where enumerated COM devices are stored
-* \param[in/out]   numElements
-*      Maximum number of elements to enumerate. Is populated with number
-*      of devices enumerated.
-*
-* \return
-*
-*/
-//-----------------------------------------------------------------------------
-/*static*/uint32_t
-SblDevice::enumerate(ComPortElement *pComPortElements, int &numElements)
-{
-    ComPort com;
-    if (com.enumerate(pComPortElements, numElements) != ComPort::COMPORT_SUCCESS)
-    {
-        printf("Failed to enumerate COM devices.\n");
-        return SBL_ENUM_ERROR;
-    }
-
-    return SBL_SUCCESS;
-}
-#endif
-//-----------------------------------------------------------------------------
-/** \brief Connect to given port number at specified baud rate.
-*
-* \param[in] csPortNum
-*      String containing the COM port to use
-* \param[in] ui32BaudRate
-*      Baud rate to use for talking to the device.
-* \param[in] bEnableXosc (optional)
-*      If true, try to enable device XOSC. Defaults to false. This option is
-*      not available for all device types.
-*
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDevice::connect(std::string csPortNum, uint32_t ui32BaudRate,
-    bool bEnableXosc/* = false*/)
-{
-	DEBUG_PRINT("\n");
-    int retCode = SBL_SUCCESS;
-
-    //
-    // Check input arguments
-    //
-    if (csPortNum.empty() || ui32BaudRate == 0)
-    {
-        setState(SBL_ARGUMENT_ERROR, "Cannot connect. Port number '%s' or baud rate '%d' is invalid.\n",
-            csPortNum.c_str(), ui32BaudRate);
-        return SBL_ARGUMENT_ERROR;
-    }
-
-    // Try to connect to the specified port at the specified baud rate
-    if (m_pCom != NULL)
-    {
-        // Try to open port
-#if 1	
-		char result = m_pCom->openDevice(csPortNum.c_str(),ui32BaudRate);
-		if(result < 0)
-		{
-            setState(SBL_PORT_ERROR, "SBL: Unable to open %s. Error: %d.\n", csPortNum.c_str(), result);
-            return SBL_PORT_ERROR;
-		}
-#else		
-        if (int result = m_pCom->open(csPortNum,
-            ui32BaudRate,
-            SBL_DEFAULT_READ_TIMEOUT,
-            SBL_DEFAULT_WRITE_TIMEOUT) != ComPort::COMPORT_SUCCESS)
-        {
-            setState(SBL_PORT_ERROR, "SBL: Unable to open %s. Error: %d.\n", csPortNum.c_str(), result);
-            return SBL_PORT_ERROR;
-        }
-#endif
-        m_csComPort = csPortNum;
-        m_baudRate = ui32BaudRate;
-    }
-    // Check if device is responding at the given baud rate
-    if ((retCode = initCommunication(bEnableXosc)) != SBL_SUCCESS)
-    {
-        return retCode;
-    }
-
-    //
-    // Read device ID
-    //
-    uint32_t tmp;
-    if ((retCode = readDeviceId(&tmp)) != SBL_SUCCESS)
-    {
-        setState(retCode, "Failed to read device ID during initial connect.\n");
-        return retCode;
-    }
-    //
-    // Read device flash size
-    //   
-    if ((retCode = readFlashSize(&tmp)) != SBL_SUCCESS)
-    {
-        setState(retCode, "Failed to read flash size during initial connect.\n");
-        return retCode;
-    }
-    //
-    // Read device ram size
-    //
-    if ((retCode = readRamSize(&tmp)) != SBL_SUCCESS)
-    {
-        setState(retCode, "Failed to read RAM size during initial connect.\n");
-        return retCode;
-    }
-    return SBL_SUCCESS;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Send auto baud.
-*
-* \param[out] bBaudSetOk
-*      True if response is ACK, false otherwise
-*
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDevice::sendAutoBaud(bool &bBaudSetOk)
-{
-	DEBUG_PRINT("\n");
-    bBaudSetOk = false;
-    //
-    // Send 0x55 0x55 and expect ACK
-    //
-    char pData[2];
-    memset(pData, 0x55, 2);
-    if (m_pCom->writeBytes(pData, 2) != 2)
-    {
-        setState(SBL_PORT_ERROR, "Communication initialization failed. Failed to send data.\n");
-        return SBL_PORT_ERROR;
-    }
-
-    if (getCmdResponse(bBaudSetOk, 2, true) != SBL_SUCCESS)
-    {
-        // No response received. Invalid baud rate?
-        setState(SBL_PORT_ERROR, "No response from device. Device may not be in bootloader mode. Reset device and try again.\nIf problem persists, check connection and baud rate.\n");
-        return SBL_PORT_ERROR;
-    }
-
-    return SBL_SUCCESS;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Get ACK/NAK from the boot loader.
-*
-* \param[out] bAck
-*      True if response is ACK, false if response is NAK.
-* \param[in] ui32MaxRetries (optional)
-*      How many times ComPort::readBytes() can time out before fail is issued.
-* \param[in] bQuietTimeout (optional)
-*      Do not set error if no command response is received.
-*
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDevice::getCmdResponse(bool &bAck,
-    uint32_t ui32MaxRetries/* = SBL_DEFAULT_RETRY_COUNT*/,
-    bool bQuietTimeout/* = false*/)
-{
-	DEBUG_PRINT("\n");
-    unsigned char pIn[2];
-    memset(pIn, 0, 2);
-    uint32_t numBytes = 0;
-    uint32_t retry = 0;
-    bAck = false;
-    uint32_t bytesRecv = 0;
-
-    //
-    // Expect 2 bytes (ACK or NAK)
-    //
-    do
-    {
-        numBytes = m_pCom->readBytes(pIn, 2);
-        bytesRecv += numBytes;
-        retry++;
-    } while ((bytesRecv < 2) && (retry < ui32MaxRetries));
-
-    if (bytesRecv < 2)
-    {
-        if (!bQuietTimeout) setState(SBL_TIMEOUT_ERROR, "Timed out waiting for ACK/NAK. No response from device.\n");
-        return SBL_TIMEOUT_ERROR;
-    }
-    else
-    {
-        if (pIn[0] == 0x00 && pIn[1] == 0xCC)
-        {
-            bAck = true;
-            return setState(SBL_SUCCESS);
-        }
-        else if (pIn[0] == 0x00 && pIn[1] == 0x33)
-        {
-            return setState(SBL_SUCCESS);
-        }
-        else
-        {
-            setState(SBL_ERROR, "ACK/NAK not received. Expected 0x00 0xCC or 0x00 0x33, received 0x%02X 0x%02X. bytesRecv=%d\n", pIn[0], pIn[1], bytesRecv);
-            return SBL_ERROR;
-        }
-    }
-    return SBL_ERROR;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Send command response (ACK/NAK).
-*
-* \param[in] bAck
-*      True if response is ACK, false if response is NAK.
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDevice::sendCmdResponse(bool bAck)
-{
-	DEBUG_PRINT("\n");
-    //
-    // Send response
-    //
-    char pData[2];
-    pData[0] = 0x00;
-    pData[1] = (bAck) ? 0xCC : 0x33;
-
-    if (m_pCom->writeBytes(pData, 2) != 2)
-    {
-        setState(SBL_PORT_ERROR, "Failed to send ACK/NAK response over %s\n",
-            m_csComPort.c_str());
-        return SBL_PORT_ERROR;
-    }
-    return SBL_SUCCESS;
-}
-
-//-----------------------------------------------------------------------------
-/** \brief Get response data from device.
-*
-* \param[out] pcData
-*      Pointer to where received data will be stored.
-* \param[in|out] ui32MaxLen
-*      Max number of bytes that can be received. Is populated with the actual
-*      number of bytes received.
-* \param[in] ui32MaxRetries (optional)
-*      How many times ComPort::readBytes() can time out before fail is issued.
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDevice::getResponseData(char *pcData, uint32_t &ui32MaxLen,
-    uint32_t ui32MaxRetries/* = SBL_DEFAULT_RETRY_COUNT*/)
-{
-	DEBUG_PRINT("\n");
-    uint32_t numBytes = 0;
-    uint32_t retry = 0;
-    unsigned char pcHdr[2];
-    uint32_t numPayloadBytes;
-    uint8_t hdrChecksum, dataChecksum;
-    uint32_t bytesRecv = 0;
-
-    setState(SBL_SUCCESS);
-    //
-    // Read length and checksum
-    //
-    memset(pcHdr, 0, 2);
-    do
-    {
-        bytesRecv += m_pCom->readBytes(&pcHdr[bytesRecv], (2 - bytesRecv));
-        retry++;
-    } while ((bytesRecv < 2) && retry < ui32MaxRetries);
-
-    //
-    // Check that we've received 2 bytes
-    //
-    if (bytesRecv < 2)
-    {
-        setState(SBL_TIMEOUT_ERROR, "Timed out waiting for data header from device.\n");
-        return SBL_TIMEOUT_ERROR;
-    }
-    numPayloadBytes = pcHdr[0] - 2;
-    hdrChecksum = pcHdr[1];
-
-    //
-    // Check if length byte is too long.
-    //
-    if (numPayloadBytes > ui32MaxLen)
-    {
-        setState(SBL_ERROR, "Error: Device sending more data than expected. \nMax expected was %d, sent was %d.\n", (uint32_t)ui32MaxLen, (numPayloadBytes + 2));
-#if 1
-        m_pCom->flushReceiver();
-#endif		
-        return SBL_ERROR;
-    }
-
-    //
-    // Read the payload data
-    //
-    bytesRecv = 0;
-    do
-    {
-        bytesRecv += m_pCom->readBytes(&pcData[bytesRecv], (numPayloadBytes - bytesRecv));
-        retry++;
-    } while (bytesRecv < numPayloadBytes && retry < ui32MaxRetries);
-
-    //
-    // Have we received what we expected?
-    //
-    if (bytesRecv < numPayloadBytes)
-    {
-        ui32MaxLen = bytesRecv;
-        setState(SBL_TIMEOUT_ERROR, "Timed out waiting for data from device.\n");
-        return SBL_TIMEOUT_ERROR;
-    }
-
-    //
-    // Verify data checksum
-    //
-    dataChecksum = generateCheckSum(0, pcData, numPayloadBytes);
-    if (dataChecksum != hdrChecksum)
-    {
-        setState(SBL_ERROR, "Checksum verification error. Expected 0x%02X, got 0x%02X.\n", hdrChecksum, dataChecksum);
-        return SBL_ERROR;
-    }
-
-    ui32MaxLen = bytesRecv;
-    return SBL_SUCCESS;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Are we connected to the device?
-*
-* \return
-*      Returns true if connected to device.
-*      Returns false if not connected to device.
-*/
-//-----------------------------------------------------------------------------
-bool
-SblDevice::isConnected()
-{
-	DEBUG_PRINT("\n");
-    if (!m_pCom)
-    {
-        return false;
-    }
-    return true;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief This function generates the bootloader protocol checksum.
-*
-* \param[in] ui32Cmd
-*      The bootloader command
-* \param[in] pcData
-*      Pointer to the command data.
-* \param[in] ui32DataLen
-*      Data length in bytes.
-*
-* \return
-*      Returns the generated checksum.
-*/
-//-----------------------------------------------------------------------------
-uint8_t
-SblDevice::generateCheckSum(uint32_t ui32Cmd, const char *pcData,
-    uint32_t ui32DataLen)
-{
-	DEBUG_PRINT("\n");
-    uint8_t ui8CheckSum = (uint8_t)ui32Cmd;
-    for (uint32_t i = 0; i < ui32DataLen; i++)
-    {
-        ui8CheckSum += pcData[i];
-    }
-    return ui8CheckSum;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief This function sets the SBL status and the SBL error string.
-*
-* \param[in] ui32Status
-*      The new SBL status. SBL_SUCCESS, SBL_ERROR, ...
-* \param[in] pcFormat
-*      'printf' like format string.
-* \param[in] ...
-*      Input variables to the \e pcFormat string.
-*
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDevice::setState(const uint32_t &ui32Status, char *pcFormat, ...)
-{
-	DEBUG_PRINT("\n");
-    va_list args;
-    char text[2048];
-
-    m_lastSblStatus = ui32Status;
-
-    // Attempt to do a sanity check. Not possible to say how long
-    // the formatted text will be, but if we reserve half the space for 
-    // formatted arguments it should be sufficient.
-    if (strlen(pcFormat) > 2048 / 2) {
-        return SBL_ERROR;
-    }
-
-    va_start(args, pcFormat);
-#if 0	
-    vsprintf_s(text, pcFormat, args);
-#else
-	vsprintf(text, pcFormat, args);
-#endif
-    sm_csLastError = text;
-    va_end(args);
-
-    if (SblDevice::sm_pStatusFunction != NULL)
-    {
-        bool error = (m_lastSblStatus == SBL_SUCCESS) ? false : true;
-        sm_pStatusFunction((char *)sm_csLastError.c_str(), error);
-    }
-
-    return SBL_SUCCESS;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Utility function for converting 4 elements in char array into
-*      32 bit variable. Data are converted MSB, that is. \e pcSrc[0] is the
-*      most significant byte.
-*
-* \param pcSrc[in]
-*      A pointer to the source array.
-*
-* \return
-*      Returns the 32 bit variable.
-*/
-//-----------------------------------------------------------------------------
-/*static */uint32_t
-SblDevice::charArrayToUL(const char *pcSrc)
-{
-	DEBUG_PRINT("\n");
-    uint32_t ui32Val = (unsigned char)pcSrc[3];
-    ui32Val += (((unsigned long)pcSrc[2]) & 0xFF) << 8;
-    ui32Val += (((unsigned long)pcSrc[1]) & 0xFF) << 16;
-    ui32Val += (((unsigned long)pcSrc[0]) & 0xFF) << 24;
-    return (ui32Val);
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Utility function for splitting 32 bit variable into char array
-*      (4 elements). Data are converted MSB, that is, \e pcDst[0] is the
-*      most significant byte.
-*
-* \param[in] ui32Src
-*      The 32 bit variable to convert.
-*
-* \param[out] pcDst
-*      Pointer to the char array where the data will be stored.
-*
-* \return
-*      void
-*/
-//-----------------------------------------------------------------------------
-/*static */void
-SblDevice::ulToCharArray(const uint32_t ui32Src, char *pcDst)
-{
-	DEBUG_PRINT("\n");
-    // MSB first
-    pcDst[0] = (uint8_t)(ui32Src >> 24);
-    pcDst[1] = (uint8_t)(ui32Src >> 16);
-    pcDst[2] = (uint8_t)(ui32Src >> 8);
-    pcDst[3] = (uint8_t)(ui32Src >> 0);
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief Utility function for swapping the byte order of a 4B char array.
-*
-* \param[in|out] pcArray
-*      The char array to byte swap.
-*
-* \return
-*      void
-*/
-//-----------------------------------------------------------------------------
-/*static */void
-SblDevice::byteSwap(char *pcArray)
-{
-	DEBUG_PRINT("\n");
-    uint8_t tmp[2] = { (uint8_t)pcArray[0], (uint8_t)pcArray[1] };
-    pcArray[0] = pcArray[3];
-    pcArray[1] = pcArray[2];
-    pcArray[2] = tmp[1];
-    pcArray[3] = tmp[0];
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief This functions sets the SBL progress.
-*
-* \param[in] ui32Progress
-*      The current progress, typically in percent [0-100].
-*
-* \return
-*      void
-*/
-//-----------------------------------------------------------------------------
-/*static*/uint32_t
-SblDevice::setProgress(uint32_t ui32Progress)
-{
-	DEBUG_PRINT("\n");
-    if (sm_pProgressFunction)
-    {
-        sm_pProgressFunction(ui32Progress);
-    }
-
-    sm_progress = ui32Progress;
-
-    return SBL_SUCCESS;
-}

feeds/bluetooth-cc2652/cc2652/src/sbl_device.h

@@ -1,143 +0,0 @@
-#ifndef __SBL_DEVICE_H__
-#define __SBL_DEVICE_H__
-/******************************************************************************
-*  Filename:       sbl_device.h
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader device header file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include "serialib.h"
-//
-// Typedefs for callback functions to report status and progress to application
-//
-typedef void (*tStatusFPTR)(char *pcText, bool bError);
-typedef void (*tProgressFPTR)(uint32_t ui32Value);
-
-class SblDevice
-{
-public:
-    // Constructor
-    ~SblDevice();
-
-    // Static functions
-    static SblDevice *Create(uint32_t ui32ChipType);
-    virtual uint32_t connect(std::string csPortNum, uint32_t ui32BaudRate, bool bEnableXosc = false);
-    virtual uint32_t ping() = 0;
-    virtual uint32_t readStatus(uint32_t *pui32Status) = 0;
-    virtual uint32_t readDeviceId(uint32_t *pui32DeviceId) = 0;
-    virtual uint32_t readFlashSize(uint32_t *pui32FlashSize) = 0;
-    virtual uint32_t readRamSize(uint32_t *pui32RamSize) = 0;
-    virtual uint32_t run(uint32_t ui32Address) { (void)ui32Address; return SBL_UNSUPPORTED_FUNCTION; };
-    virtual uint32_t reset() = 0;
-    virtual uint32_t eraseFlashRange(uint32_t ui32StartAddress, uint32_t ui32ByteCount) { (void)ui32StartAddress; (void)ui32ByteCount; return 0; };
-    virtual uint32_t writeFlashRange(uint32_t ui32StartAddress, uint32_t ui32ByteCount, const char *pcData) { (void)ui32StartAddress; (void)ui32ByteCount; (void)pcData; return 0; };
-    virtual uint32_t readMemory32(uint32_t ui32StartAddress, uint32_t ui32UnitCount, uint32_t *pui32Data) = 0;
-    virtual uint32_t readMemory8(uint32_t ui32StartAddress, uint32_t ui32UnitCount, char *pcData) = 0;
-    virtual uint32_t writeMemory32(uint32_t ui32StartAddress, uint32_t ui32UnitCount, const uint32_t *pui32Data) = 0;
-    virtual uint32_t writeMemory8(uint32_t ui32StartAddress, uint32_t ui32UnitCount, const char *pcData) = 0;
-    virtual uint32_t calculateCrc32(uint32_t ui32StartAddress, uint32_t ui32ByteCount, uint32_t *pui32Crc) = 0;
-
-    // CC2650 specific
-    virtual uint32_t eraseFlashBank(){ return SBL_UNSUPPORTED_FUNCTION; };
-    virtual uint32_t setCCFG(uint32_t ui32Field, uint32_t ui32FieldValue) { (void)ui32Field; (void)ui32FieldValue; return SBL_UNSUPPORTED_FUNCTION; };
-
-    // CC2538 specific
-    virtual uint32_t setXosc() { return SBL_UNSUPPORTED_FUNCTION; };
-
-    // Utility functions
-    bool isConnected();
-    uint32_t getDeviceId() { return m_deviceId; } 
-    uint32_t getFlashSize() { return m_flashSize; }
-    uint32_t getRamSize() { return m_ramSize; }
-    uint32_t getBaudRate() { return m_baudRate; }
-    uint32_t getLastStatus() {return m_lastSblStatus; }
-    uint32_t getLastDeviceStatus() { return m_lastDeviceStatus; }
-    uint32_t getPageEraseSize() { return m_pageEraseSize; }
-    static std::string &getLastError(void) { return sm_csLastError;}
-    static uint32_t getProgress() { return sm_progress; }
-    static uint32_t setProgress(uint32_t ui32Progress);
-    static void setCallBackStatusFunction(tStatusFPTR pSf) {sm_pStatusFunction = pSf; }
-    static void setCallBackProgressFunction(tProgressFPTR pPf) {sm_pProgressFunction = pPf; }
-
-protected:
-    // Constructor
-    SblDevice();
-
-    virtual uint32_t initCommunication(bool bSetXosc) = 0;
-    virtual uint32_t sendCmd(uint32_t ui32Cmd, const char *pcSendData = NULL, uint32_t ui32SendLen = 0) = 0;
-    virtual uint32_t sendAutoBaud(bool &bBaudSetOk);
-    virtual uint32_t getCmdResponse(bool &bAck, uint32_t ui32MaxRetries = SBL_DEFAULT_RETRY_COUNT, bool bQuiet = false);
-    virtual uint32_t sendCmdResponse(bool bAck);
-    virtual uint32_t getResponseData(char *pcData, uint32_t &ui32MaxLen, uint32_t ui32MaxRetries = SBL_DEFAULT_RETRY_COUNT);
-
-    virtual uint8_t generateCheckSum(uint32_t ui32Cmd, const char *pcData, uint32_t ui32DataLen);
-    virtual uint32_t addressToPage(uint32_t ui32Address) = 0;
-    virtual bool addressInRam(uint32_t ui32StartAddress, uint32_t ui32ByteCount = 1) = 0;
-    virtual bool addressInFlash(uint32_t ui32StartAddress, uint32_t ui32ByteCount = 1) = 0;
-
-    virtual uint32_t getBootloaderEnableAddress() = 0;
-
-    uint32_t setState(const uint32_t &ui32Status) { m_lastSblStatus = ui32Status; return m_lastSblStatus;}
-    uint32_t setState(const uint32_t &ui32Status, char *pcFormat, ...);
-
-    // Utility
-    static uint32_t charArrayToUL(const char *pcSrc);
-    static void ulToCharArray(const uint32_t ui32Src, char *pcDst);
-    static void byteSwap(char *pcArray);
-
-	serialib *m_pCom;
-	std::string m_csComPort;
-    bool        m_bCommInitialized;
-    uint32_t    m_baudRate;
-
-    static uint32_t sm_chipType;
-    uint32_t    m_deviceId;
-    uint32_t    m_flashSize;
-    uint32_t    m_ramSize;
-    uint32_t    m_pageEraseSize;
-
-    // Status and progress variables
-    int32_t                 m_lastDeviceStatus;
-    int32_t                 m_lastSblStatus;
-    static uint32_t         sm_progress;
-    static std::string      sm_csLastError;
-    static tProgressFPTR    sm_pProgressFunction;
-    static tStatusFPTR      sm_pStatusFunction;
-
-private:
-
-};
-
-#endif // __SBL_DEVICE_H__

feeds/bluetooth-cc2652/cc2652/src/sbl_device_cc2538.h

@@ -1,126 +0,0 @@
-#ifndef __SBL_DEVICE_CC2538_H__
-#define __SBL_DEVICE_CC2538_H__
-/******************************************************************************
-*  Filename:       sbl_device_cc2538.h
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader for CC2538 header file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include <sbl_device.h>
-
-//
-// For more information about the CC2538 serial bootloader interface,
-// please refer to the CC2538 ROM User's guide (http://www.ti.com/lit/swru333)
-//
-
-#define SBL_CC2538_PAGE_ERASE_SIZE          2048
-#define SBL_CC2538_FLASH_START_ADDRESS      0x00200000
-#define SBL_CC2538_RAM_START_ADDRESS        0x20000000
-#define SBL_CC2538_ACCESS_WIDTH_4B          4
-#define SBL_CC2538_ACCESS_WIDTH_1B          1
-#define SBL_CC2538_PAGE_ERASE_TIME_MS       20
-#define SBL_CC2538_MAX_BYTES_PER_TRANSFER   252
-#define SBL_CC2538_DIECFG0                  0x400D3014
-#define SBL_CC2538_BL_CONFIG_PAGE_OFFSET    2007
-#define SBL_CC2538_BL_CONFIG_ENABLED_BM     0x10
-
-class SblDeviceCC2538 : public SblDevice
-{
-public:
-    SblDeviceCC2538();  // Constructor
-    ~SblDeviceCC2538(); // Destructor
-
-    enum {
-        CMD_PING             = 0x20,
-        CMD_DOWNLOAD         = 0x21,
-        CMD_RUN              = 0x22,
-        CMD_GET_STATUS       = 0x23,
-        CMD_SEND_DATA        = 0x24,
-        CMD_RESET            = 0x25,
-        CMD_ERASE            = 0x26,
-        CMD_CRC32            = 0x27,
-        CMD_GET_CHIP_ID      = 0x28,
-        CMD_SET_XOSC         = 0x29,
-        CMD_MEMORY_READ      = 0x2A,
-        CMD_MEMORY_WRITE     = 0x2B,
-    };
-
-    enum {
-        CMD_RET_SUCCESS      = 0x40,
-        CMD_RET_UNKNOWN_CMD  = 0x41,
-        CMD_RET_INVALID_CMD  = 0x42,
-        CMD_RET_INVALID_ADR  = 0x43,
-        CMD_RET_FLASH_FAIL   = 0x44,
-    };
-
-protected:
-
-    // Virtual functions from SblDevice
-    uint32_t ping();
-
-    uint32_t readStatus(uint32_t *pui32Status);
-    uint32_t readDeviceId(uint32_t *pui32DeviceId);
-    uint32_t readFlashSize(uint32_t *pui32FlashSize);
-    uint32_t readRamSize(uint32_t *pui32RamSize);
-
-    uint32_t run(uint32_t ui32Address);
-    uint32_t reset();
-    uint32_t eraseFlashRange(uint32_t ui32StartAddress, uint32_t ui32ByteCount);
-    uint32_t writeFlashRange(uint32_t ui32StartAddress, uint32_t ui32ByteCount, const char *pcData);
-    uint32_t readMemory32(uint32_t ui32StartAddress, uint32_t ui32UnitCount, uint32_t *pui32Data);
-    uint32_t readMemory8(uint32_t ui32StartAddress, uint32_t ui32UnitCount, char *pcData);
-    uint32_t writeMemory32(uint32_t ui32StartAddress, uint32_t ui32UnitCount, const uint32_t *pui32Data);
-    uint32_t writeMemory8(uint32_t ui32StartAddress, uint32_t ui32UnitCount, const char *pcData);
-
-    uint32_t calculateCrc32(uint32_t ui32StartAddress, uint32_t ui32ByteCount, uint32_t *pui32Crc);
-
-    uint32_t sendCmd(uint32_t ui32Cmd, const char *pcSendData = NULL, uint32_t ui32SendLen = 0);
-    uint32_t addressToPage(uint32_t ui32Address);
-    bool     addressInRam(uint32_t ui32StartAddress, uint32_t ui32ByteCount = 1);
-    bool     addressInFlash(uint32_t ui32StartAddress, uint32_t ui32ByteCount = 1);
-    uint32_t setXosc();
-
-private:
-    uint32_t initCommunication(bool bSetXosc);
-    uint32_t cmdDownload(uint32_t ui32Address, uint32_t ui32Size);
-    uint32_t cmdSendData(const char *pcData, uint32_t ui32ByteCount);
-
-    uint32_t getBootloaderEnableAddress();
-
-    std::string getCmdString(uint32_t ui32Cmd);
-    std::string getCmdStatusString(uint32_t ui32Status);
-};
-
-#endif // __SBL_DEVICE_CC2538_H__

feeds/bluetooth-cc2652/cc2652/src/sbl_device_cc2650.h

@@ -1,153 +0,0 @@
-#ifndef __SBL_DEVICE_CC2650_H__
-#define __SBL_DEVICE_CC2650_H__
-/******************************************************************************
-*  Filename:       sbl_device_cc2650.h
-*  Revised:        $Date: 2013-07-26 09:53:42 +0200 (fr, 26 jul 2013) $
-*  Revision:       $Revision: 26971 $
-*
-*  Description:    Serial Bootloader for CC2650 header file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include <sbl_device.h>
-
-
-#define SBL_CC2650_PAGE_ERASE_SIZE          4096
-#define SBL_CC2650_FLASH_START_ADDRESS      0x00000000
-#define SBL_CC2650_RAM_START_ADDRESS        0x20000000
-#define SBL_CC2650_ACCESS_WIDTH_32B         1
-#define SBL_CC2650_ACCESS_WIDTH_8B          0
-#define SBL_CC2650_PAGE_ERASE_TIME_MS       20
-#define SBL_CC2650_MAX_BYTES_PER_TRANSFER   252
-#define SBL_CC2650_MAX_MEMWRITE_BYTES       247
-#define SBL_CC2650_MAX_MEMWRITE_WORDS       61
-#define SBL_CC2650_MAX_MEMREAD_BYTES        253
-#define SBL_CC2650_MAX_MEMREAD_WORDS        63
-#define SBL_CC2650_FLASH_SIZE_CFG           0x4003002C
-#define SBL_CC2650_RAM_SIZE_CFG             0x40082250
-#define SBL_CC2650_BL_CONFIG_PAGE_OFFSET    0xFDB
-#define SBL_CC2650_BL_CONFIG_ENABLED_BM     0xC5
-#define SBL_CC2650_BL_WORK_MEMORY_START     0x20000000
-#define SBL_CC2650_BL_WORK_MEMORY_END       0x2000016F
-#define SBL_CC2650_BL_STACK_MEMORY_START    0x20000FC0
-#define SBL_CC2650_BL_STACK_MEMORY_END      0x20000FFF
-
-class SblDeviceCC2650 : public SblDevice
-{
-public:
-    SblDeviceCC2650();  // Constructor
-    ~SblDeviceCC2650(); // Destructor
-
-    enum {
-        CMD_PING             = 0x20,
-        CMD_DOWNLOAD         = 0x21,
-        CMD_GET_STATUS       = 0x23,
-        CMD_SEND_DATA        = 0x24,
-        CMD_RESET            = 0x25,
-        CMD_SECTOR_ERASE     = 0x26,
-        CMD_CRC32            = 0x27,
-        CMD_GET_CHIP_ID      = 0x28,
-        CMD_MEMORY_READ      = 0x2A,
-        CMD_MEMORY_WRITE     = 0x2B,
-        CMD_BANK_ERASE       = 0x2C,
-        CMD_SET_CCFG         = 0x2D,
-    };
-
-    /* Early samples had different command IDs */
-    enum
-    {
-        REV1_CMD_BANK_ERASE   = 0x2A,
-        REV1_CMD_SET_CCFG     = 0x2B,
-        REV1_CMD_MEMORY_READ  = 0x2C,
-        REV1_CMD_MEMORY_WRITE = 0x2D,
-    };
-
-    enum {
-        CMD_RET_SUCCESS      = 0x40,
-        CMD_RET_UNKNOWN_CMD  = 0x41,
-        CMD_RET_INVALID_CMD  = 0x42,
-        CMD_RET_INVALID_ADR  = 0x43,
-        CMD_RET_FLASH_FAIL   = 0x44,
-    };
-
-protected:
-
-    // Virtual functions from SblDevice
-    uint32_t ping();
-
-    uint32_t readStatus(uint32_t *pui32Status);
-    uint32_t readDeviceId(uint32_t *pui32DeviceId);
-    virtual uint32_t readFlashSize(uint32_t *pui32FlashSize);
-    virtual uint32_t readRamSize(uint32_t *pui32RamSize);
-
-    uint32_t reset();
-    uint32_t eraseFlashRange(uint32_t ui32StartAddress, uint32_t ui32ByteCount);
-    uint32_t writeFlashRange(uint32_t ui32StartAddress, uint32_t ui32ByteCount, const char *pcData);
-
-
-    uint32_t readMemory32(uint32_t ui32StartAddress, uint32_t ui32UnitCount, uint32_t *pui32Data);
-    uint32_t readMemory8(uint32_t ui32StartAddress, uint32_t ui32UnitCount, char *pcData);
-    uint32_t writeMemory32(uint32_t ui32StartAddress, uint32_t ui32UnitCount, const uint32_t *pui32Data);
-    uint32_t writeMemory8(uint32_t ui32StartAddress, uint32_t ui32UnitCount, const char *pcData);
-
-    uint32_t calculateCrc32(uint32_t ui32StartAddress, uint32_t ui32ByteCount, uint32_t *pui32Crc);
-
-    uint32_t sendCmd(uint32_t ui32Cmd, const char *pcSendData = NULL, uint32_t ui32SendLen = 0);
-    std::string getCmdString(uint32_t ui32Cmd);
-    uint32_t addressToPage(uint32_t ui32Address);
-    bool     addressInRam(uint32_t ui32StartAddress, uint32_t ui32ByteCount = 1);
-    bool     addressInFlash(uint32_t ui32StartAddress, uint32_t ui32ByteCount = 1);
-
-    uint32_t convertCmdForEarlySamples(uint32_t ui32Cmd);
-
-    virtual uint32_t getBootloaderEnableAddress();
-
-    // CC2650 specific
-    uint32_t eraseFlashBank();
-    uint32_t setCCFG(uint32_t ui32Field, uint32_t ui32FieldValue);
-
-    // Device revision. Used internally by SBL to handle early samples with different command IDs.
-    uint32_t m_deviceRev;
-private:
-    uint32_t initCommunication(bool bSetXosc);
-    uint32_t cmdDownload(uint32_t ui32Address, uint32_t ui32Size);
-    uint32_t cmdSendData(const char *pcData, uint32_t ui32ByteCount);
-
-    std::string getCmdStatusString(uint32_t ui32Status);
-
-    bool     addressInBLWorkMemory(uint32_t ui32StartAddr, uint32_t ui32ByteCount = 1);
-
-
-};
-
-
-#endif // __SBL_DEVICE_CC2650_H__

feeds/bluetooth-cc2652/cc2652/src/sbl_device_cc2652.cpp

@@ -1,330 +0,0 @@
-/******************************************************************************
-*  Filename:       sbl_device_cc2652.cpp
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader device file for CC13x2/CC26x2
-*
-*  Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-
-#include <sbllib.h>
-#include "sbl_device.h"
-#include "sbl_device_cc2652.h"
-
-#include "serialib.h"
-
-
-//-----------------------------------------------------------------------------
-/** \brief Constructor
-*/
-//-----------------------------------------------------------------------------
-SblDeviceCC2652::SblDeviceCC2652() : SblDeviceCC2650()
-{
-	DEBUG_PRINT("\n");
-    m_pageEraseSize = SBL_CC2652_PAGE_ERASE_SIZE;
-}
-
-//-----------------------------------------------------------------------------
-/** \brief Destructor
-*/
-//-----------------------------------------------------------------------------
-SblDeviceCC2652::~SblDeviceCC2652()
-{
-	DEBUG_PRINT("\n");
-}
-
-//-----------------------------------------------------------------------------
-/** \brief This function reads device FLASH size in bytes.
-*
-* \param[out] pui32FlashSize
-*      Pointer to where FLASH size is stored.
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDeviceCC2652::readFlashSize(uint32_t *pui32FlashSize)
-{
-	DEBUG_PRINT("\n");
-    uint32_t retCode = SBL_SUCCESS;
-
-    //
-    // Read CC2652 DIECFG0 (contains FLASH size information)
-    //
-    uint32_t addr = SBL_CC2652_FLASH_SIZE_CFG;
-    uint32_t value;
-    if ((retCode = readMemory32(addr, 1, &value)) != SBL_SUCCESS)
-    {
-        setState((tSblStatus)retCode, "Failed to read device FLASH size: %s", getLastError().c_str());
-        return retCode;
-    }
-
-    //
-    // Calculate flash size (The number of flash sectors are at bits [7:0])
-    //
-    value &= 0xFF;
-    *pui32FlashSize = value*SBL_CC2652_PAGE_ERASE_SIZE;
-
-    m_flashSize = *pui32FlashSize;
-
-    return SBL_SUCCESS;
-}
-
-//-----------------------------------------------------------------------------
-/** \brief This function reads device RAM size in bytes.
-*
-* \param[out] pui32RamSize
-*      Pointer to where RAM size is stored.
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDeviceCC2652::readRamSize(uint32_t *pui32RamSize)
-{
-	DEBUG_PRINT("\n");
-    int retCode = SBL_SUCCESS;
-
-    uint32_t addr = SBL_CC2652_RAM_SIZE_CFG;
-    uint32_t value;
-
-    if ((retCode = readMemory32(addr, 1, &value)) != SBL_SUCCESS)
-    {
-        setState(retCode, "Failed to read device RAM size: %s", getLastError().c_str());
-        return retCode;
-    }
-
-    uint32_t ramSizeInfo = (value & CHIP_SRAM_SIZE_INFO_M) >> CHIP_SRAM_SIZE_INFO_S;
-
-    m_ramSize = calculateRamSize(ramSizeInfo);
-
-    if (*pui32RamSize != NULL)
-    {
-        *pui32RamSize = m_ramSize;
-    }
-
-    return retCode;
-}
-
-//-----------------------------------------------------------------------------
-/** \brief  Calculate RAM size.
-*
-*   \param[in] ramSizeInfo
-*        Register value for RAM size configuration (TOP:PRCM:RAMHWOPT). 
-*        The argument is optional and the default value is 3 (RAM size 80 KB)
-*   \returns  uint32_t
-*       Ram size
-*/
-//-----------------------------------------------------------------------------
-uint32_t SblDeviceCC2652::calculateRamSize(uint32_t ramSizeInfo)
-{
-	DEBUG_PRINT("\n");
-    uint32_t ramSize;
-
-    switch (ramSizeInfo)
-    {
-    case 0:
-        ramSize = (32 * 1024);
-        break;
-    case 1:
-        ramSize = (48 * 1024);
-        break;
-    case 2:
-        ramSize = (64 * 1024);
-        break;
-    case 3:
-    default:
-        ramSize = (80 * 1024);
-        break;
-    }
-
-    return ramSize;
-
-}
-
-//-----------------------------------------------------------------------------
-/** \brief This function returns the FLASH address of the bootloader enable
-*      configuration.
-*
-* \return
-*      Returns true if the address/range is within the device RAM.
-*/
-//-----------------------------------------------------------------------------
-uint32_t SblDeviceCC2652::getBootloaderEnableAddress()
-{
-	DEBUG_PRINT("\n");
-    return SBL_CC2652_FLASH_START_ADDRESS + getFlashSize() - getPageEraseSize() + SBL_CC2652_BL_CONFIG_PAGE_OFFSET;
-}
-
-//-----------------------------------------------------------------------------
-/** \brief This function returns a string with the device command name of
-*      \e ui32Cmd.
-*
-* \param[out] ui32Cmd
-*      The serial bootloader command.
-* \return
-*      Returns std::string with name of device command.
-*/
-//-----------------------------------------------------------------------------
-std::string
-SblDeviceCC2652::getCmdString(uint32_t ui32Cmd)
-{
-	DEBUG_PRINT("\n");
-    std::string cmd = SblDeviceCC2650::getCmdString(ui32Cmd);
-    if (cmd.find("Unknown") != std::string::npos)
-    {
-        switch (ui32Cmd)
-        {
-        case SblDeviceCC2652::CMD_DOWNLOAD_CRC:     cmd = "CMD_DOWNLOAD_CRC"; break;
-        default: cmd = "Unknown command"; break;
-        }
-    }
-
-    return cmd;
-}
-
-
-//-----------------------------------------------------------------------------
-/** \brief This function sends the CC2652 download CRC command and handles the
-*      device response.
-*
-* \param[in] ui32Address
-*      The start address in CC2652 flash.
-* \param[in] ui32Size
-*      Number of bytes to be sent.
-* \param[in] ui32Crc
-*      Total number of bytes to be programmed. 
-*
-* \return
-*      Returns SBL_SUCCESS if command and response was successful.
-*/
-//-----------------------------------------------------------------------------
-uint32_t SblDeviceCC2652::cmdDownloadCrc(uint32_t ui32Address, uint32_t ui32Size, uint32_t ui32Crc)
-{
-	DEBUG_PRINT("\n");
-    int retCode = SBL_SUCCESS;
-    bool bSuccess = false;
-
-    //
-    // Check input arguments
-    //
-    if (!addressInFlash(ui32Address, ui32Size) &&
-        !addressInRam(ui32Address, ui32Size))
-    {
-        setState(SBL_ARGUMENT_ERROR, "Specified address range (0x%08X + %d bytes) is not in device FLASH nor RAM.\n", ui32Address, ui32Size);
-        return SBL_ARGUMENT_ERROR;
-    }
-
-    //
-    // Generate payload
-    // - 4B Program address
-    // - 4B Program data
-    // - 4B CRC
-    //
-    char pcPayload[12];
-    ulToCharArray(ui32Address, &pcPayload[0]);
-    ulToCharArray(ui32Size, &pcPayload[4]);
-    ulToCharArray(ui32Crc, &pcPayload[8]);
-
-    //
-    // Send command
-    //
-    if ((retCode = sendCmd(SblDeviceCC2652::CMD_DOWNLOAD_CRC, pcPayload, 12) != SBL_SUCCESS))
-    {
-        return retCode;
-    }
-
-    //
-    // Receive command response (ACK/NAK)
-    //
-    if ((retCode = getCmdResponse(bSuccess)) != SBL_SUCCESS)
-    {
-        return retCode;
-    }
-
-    //
-    // Return command response
-    //
-    return (bSuccess) ? SBL_SUCCESS : SBL_ERROR;
-}
-
-//-----------------------------------------------------------------------------
-/** \brief Send command.
-*
-* \param[in] ui32Cmd
-*      The command to send.
-* \param[in] pcSendData
-*      Pointer to the data to send with the command.
-* \param[in] ui32SendLen
-*      The number of bytes to send from \e pcSendData.
-* \return
-*      Returns SBL_SUCCESS, ...
-*/
-//-----------------------------------------------------------------------------
-uint32_t
-SblDeviceCC2652::sendCmd(uint32_t ui32Cmd, const char *pcSendData/* = NULL*/,
-    uint32_t ui32SendLen/* = 0*/)
-{
-	DEBUG_PRINT("\n");
-    unsigned char pktLen = ui32SendLen + 3; // +3 => <1B Length>, <1B checksum>, <1B cmd>
-    std::vector<char> pvPkt((pktLen));
-    unsigned char pktSum = generateCheckSum(ui32Cmd, pcSendData, ui32SendLen);
-
-    //
-    // Build packet
-    //
-    pvPkt.at(0) = pktLen;
-    pvPkt.at(1) = pktSum;
-    pvPkt.at(2) = (unsigned char)ui32Cmd;
-    if (ui32SendLen)
-    {
-        memcpy(&pvPkt[3], pcSendData, ui32SendLen);
-    }
-
-    //
-    // Send packet
-    //
-    if (m_pCom->writeBytes(&pvPkt[0], pvPkt.size()) < 1)
-    {
-        setState(SBL_PORT_ERROR, "\nWriting to device failed (Command 0x%04x:'%s').\n", ui32Cmd,getCmdString(ui32Cmd).c_str());
-        return SBL_PORT_ERROR;
-    }
-    //
-    // Empty and deallocate vector
-    //
-    pvPkt.clear();
-    std::vector<char>().swap(pvPkt);
-
-    return SBL_SUCCESS;
-}
-

feeds/bluetooth-cc2652/cc2652/src/sbl_device_cc2652.h

@@ -1,77 +0,0 @@
-#ifndef __SBL_DEVICE_CC2652_H__
-#define __SBL_DEVICE_CC2652_H__
-/******************************************************************************
-*  Filename:       sbl_device_cc2652.h
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader for CC13x2/CC26x2 header file.
-*
-*  Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include "sbl_device_cc2650.h"
-
-#define SBL_CC2652_PAGE_ERASE_SIZE          8192
-#define SBL_CC2652_FLASH_SIZE_CFG           0x4003002C
-#define SBL_CC2652_RAM_SIZE_CFG             0x40082250
-#define SBL_CC2652_RAM_SIZE_CFG             0x40082250
-#define SBL_CC2652_FLASH_START_ADDRESS      SBL_CC2650_FLASH_START_ADDRESS
-#define SBL_CC2652_BL_CONFIG_PAGE_OFFSET    0x1FDB
-
-#define CHIP_SRAM_SIZE_INFO                 0x40082250
-#define CHIP_SRAM_SIZE_INFO_M               0x00000003
-#define CHIP_SRAM_SIZE_INFO_S               0
-
-class SblDeviceCC2652 : public SblDeviceCC2650 
-{
-public:
-    SblDeviceCC2652();  // Constructor
-    ~SblDeviceCC2652(); // Destructor
-
-    enum {
-        CMD_DOWNLOAD_CRC = 0x2F,
-    };
-
-protected:
-    uint32_t readFlashSize(uint32_t *pui32FlashSize);
-    uint32_t readRamSize(uint32_t *pui32RamSize);
-    uint32_t calculateRamSize(uint32_t ramSizeInfo);
-    uint32_t getBootloaderEnableAddress();
-
-private:
-    std::string getCmdString(uint32_t ui32Cmd);
-    uint32_t sendCmd(uint32_t ui32Cmd, const char *pcSendData = NULL, uint32_t ui32SendLen = 0);
-    uint32_t cmdDownloadCrc(uint32_t ui32Address, uint32_t ui32Size, uint32_t uiCrc);
-
-};
-
-#endif // __SBL_DEVICE_CC2652_H__

feeds/bluetooth-cc2652/cc2652/src/sbl_eb_info.h

@@ -1,66 +0,0 @@
-#ifndef __SBL_EB_INFO_H__
-#define __SBL_EB_INFO_H__
-/******************************************************************************
-*  Filename:       sbl_eb_info.h
-*  Revised:        $Date: 2013-07-09 15:06:47 +0200 (Tue, 09 Jul 2013) $
-*  Revision:       $Revision: 26800 $
-*
-*  Description:    Serial Bootloader EB info class header file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include <string.h>
-
-class SblEbInfo 
-{
-public:
-    enum 
-    {
-        DEVICE_NAME_SIZE = 15,
-        EB_PORT_SIZE = 16,
-        DESCRIPTION_SIZE = 256
-    };
-
-    char ebPort[EB_PORT_SIZE];              // E.g. COM42
-    char ebDescription[DESCRIPTION_SIZE];
-    char devName[DEVICE_NAME_SIZE];         // E.g. CC2538 for CC2650
-
-    SblEbInfo& operator = (const SblEbInfo& other) {
-        strncpy(ebPort, other.ebPort, EB_PORT_SIZE);
-        strncpy(ebDescription, other.ebDescription, DESCRIPTION_SIZE);
-        strncpy(devName, other.devName, DEVICE_NAME_SIZE);
-        return *this;
-    }
-
-};
-
-#endif // __SBL_EB_INFO_H__ 

feeds/bluetooth-cc2652/cc2652/src/sbllib.cpp

@@ -1,39 +0,0 @@
-/******************************************************************************
-*  Filename:       sbllib.cpp
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader Library main file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-

feeds/bluetooth-cc2652/cc2652/src/sbllib.h

@@ -1,69 +0,0 @@
-#ifndef __SBLLIB_H__
-#define __SBLLIB_H__
-/******************************************************************************
-*  Filename:       sbllib.h
-*  Revised:        $Date$
-*  Revision:       $Revision$
-*
-*  Description:    Serial Bootloader Library header file.
-*
-*  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************/
-#include <string>
-#include <stdint.h>
-
-#include "debug.h"
-#define SBL_MAX_DEVICES             20
-#define SBL_DEFAULT_RETRY_COUNT     1
-#define SBL_DEFAULT_READ_TIMEOUT    100 // in ms
-#define SBL_DEFAULT_WRITE_TIMEOUT   200 // in ms
-
-typedef enum {
-    SBL_SUCCESS = 0,
-    SBL_ERROR,
-    SBL_ARGUMENT_ERROR,
-    SBL_TIMEOUT_ERROR,
-    SBL_PORT_ERROR,
-    SBL_ENUM_ERROR,
-    SBL_UNSUPPORTED_FUNCTION,
-} tSblStatus;
-
-#include "serialib.h" 
-#include "sbl_device.h"
-#include "sbl_device_cc2538.h"
-#include "sbl_device_cc2650.h"
-#include "sbl_device_cc2652.h"
-#include "sbl_eb_info.h"
-
-
-
-#endif // __SBLLIB_H__

feeds/bluetooth-cc2652/cc2652/src/serialib.h

@@ -1,220 +0,0 @@
-/*!
-\file    serialib.h
-\brief   Header file of the class serialib. This class is used for communication over a serial device.
-\author  Philippe Lucidarme (University of Angers)
-\version 2.0
-\date    december the 27th of 2019
-This Serial library is used to communicate through serial port.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
-INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM,
-DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-This is a licence-free software, it can be used by anyone who try to build a better world.
-*/
-
-
-#ifndef SERIALIB_H
-#define SERIALIB_H
-
-
-
-// Used for TimeOut operations
-#include <sys/time.h>
-// Include for windows
-#if defined (_WIN32) || defined (_WIN64)
-    // Accessing to the serial port under Windows
-    #include <windows.h>
-#endif
-
-// Include for Linux
-#ifdef __linux__
-    #include <stdlib.h>
-    #include <sys/types.h>
-    #include <sys/shm.h>
-    #include <termios.h>
-    #include <string.h>
-    #include <iostream>
-    // File control definitions
-    #include <fcntl.h>
-    #include <unistd.h>
-    #include <sys/ioctl.h>
-    #include <vector>
-#endif
-
-
-/*! To avoid unused parameters */
-#define UNUSED(x) (void)(x)
-
-
-/*!  \class     serialib
-     \brief     This class is used for communication over a serial device.
-*/
-class serialib
-{
-public:
-
-    //_____________________________________
-    // ::: Constructors and destructors :::
-
-
-
-    // Constructor of the class
-    serialib    ();
-
-    // Destructor
-    ~serialib   ();
-
-
-
-    //_________________________________________
-    // ::: Configuration and initialization :::
-
-
-    // Open a device
-    char    openDevice (const char *Device,const unsigned int Bauds);
-
-    // Close the current device
-    void    closeDevice();
-
-
-
-
-    //___________________________________________
-    // ::: Read/Write operation on characters :::
-
-
-    // Write a char
-    char    writeChar   (char);
-
-    // Read a char (with timeout)
-    char    readChar    (char *pByte,const unsigned int timeOut_ms=0);
-
-
-
-
-    //________________________________________
-    // ::: Read/Write operation on strings :::
-
-
-    // Write a string
-    char    writeString (const char *String);
-
-    // Read a string (with timeout)
-    int     readString  (   char *receivedString,
-                            char finalChar,
-                            unsigned int maxNbBytes,
-                            const unsigned int timeOut_ms=0);
-
-
-
-    // _____________________________________
-    // ::: Read/Write operation on bytes :::
-
-
-    // Write an array of bytes
-    int    writeBytes  (const void *Buffer, const unsigned int NbBytes);
-
-    // Read an array of byte (with timeout)
-    int     readBytes   (void *buffer,unsigned int maxNbBytes,const unsigned int timeOut_ms=100, unsigned int sleepDuration_us=100);
-
-
-
-
-    // _________________________
-    // ::: Special operation :::
-
-
-    // Empty the received buffer
-    char    flushReceiver();
-
-    // Return the number of bytes in the received buffer
-    int     available();
-
-
-
-
-    // _________________________
-    // ::: Access to IO bits :::
-
-
-    // Set CTR status (Data Terminal Ready, pin 4)
-    bool    DTR(bool status);
-    bool    setDTR();
-    bool    clearDTR();
-
-    // Set RTS status (Request To Send, pin 7)
-    bool    RTS(bool status);
-    bool    setRTS();
-    bool    clearRTS();
-
-    // Get RI status (Ring Indicator, pin 9)
-    bool    isRI();
-
-    // Get DCD status (Data Carrier Detect, pin 1)
-    bool    isDCD();
-
-    // Get CTS status (Clear To Send, pin 8)
-    bool    isCTS();
-
-    // Get DSR status (Data Set Ready, pin 9)
-    bool    isDSR();
-
-    // Get RTS status (Request To Send, pin 7)
-    bool    isRTS();
-
-    // Get CTR status (Data Terminal Ready, pin 4)
-    bool    isDTR();
-
-
-private:
-    // Read a string (no timeout)
-    int             readStringNoTimeOut  (char *String,char FinalChar,unsigned int MaxNbBytes);
-
-    // Current DTR and RTS state (can't be read on WIndows)
-    bool            currentStateRTS;
-    bool            currentStateDTR;
-
-
-
-
-
-#if defined (_WIN32) || defined( _WIN64)
-    // Handle on serial device
-    HANDLE          hSerial;
-    // For setting serial port timeouts
-    COMMTIMEOUTS    timeouts;
-#endif
-#ifdef __linux__
-    int             fd;
-#endif
-
-};
-
-
-
-/*!  \class     timeOut
-     \brief     This class can manage a timer which is used as a timeout.
-   */
-// Class timeOut
-class timeOut
-{
-public:
-
-    // Constructor
-    timeOut();
-
-    // Init the timer
-    void                initTimer();
-
-    // Return the elapsed time since initialization
-    unsigned long int   elapsedTime_ms();
-
-private:
-    // Used to store the previous time (for computing timeout)
-    struct timeval      previousTime;
-};
-
-#endif // serialib_H

feeds/bluetooth-csr/bluez/Makefile

@@ -1,162 +0,0 @@
-#
-# Copyright (C) 2006-2016 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bluez
-PKG_VERSION:=5.37
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=@KERNEL/linux/bluetooth/
-PKG_MD5SUM:=33177e5743e24b2b3738f72be64e3ffb
-
-PKG_LICENSE:=GPL-2.0+
-PKG_LICENSE_FILES:=COPYING
-PKG_MAINTAINER:=Nicolas Thill <nico@openwrt.org>
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/nls.mk
-
-define Package/bluez/Default
-  TITLE:=Bluetooth
-  URL:=http://www.bluez.org/
-endef
-
-define Package/bluez-examples
-$(call Package/bluez/Default)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE+= python example apps
-  DEPENDS:=
-endef
-
-define Package/bluez-examples/description
-  contains many examples apps for bluetooth, requiring python
-endef
-
-define Package/bluez-libs
-$(call Package/bluez/Default)
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE+= library
-  DEPENDS:=+libpthread +kmod-bluetooth
-endef
-
-define Package/bluez-utils
-$(call Package/bluez/Default)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE+= utilities
-  DEPENDS:=+bluez-libs +libpthread +librt +glib2 +libncurses +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS)
-endef
-
-define Package/bluez-daemon
-$(call Package/bluez/Default)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE+= daemon
-  DEPENDS:=+bluez-libs +bluez-utils +dbus +libical $(INTL_DEPENDS) $(ICONV_DEPENDS)
-endef
-
-define Package/bluez-daemon/conffiles
-/etc/bluetooth/main.conf
-/etc/bluetooth/network.conf
-/etc/bluetooth/input.conf
-/etc/bluetooth/proximity.conf
-/etc/config/bluetooth
-endef
-
-CONFIGURE_ARGS += \
-	--enable-static \
-	--enable-shared \
-	--enable-client \
-	--enable-datafiles \
-	--enable-experimental \
-	--enable-library \
-	--enable-monitor \
-	--enable-obex \
-	--enable-threads \
-	--enable-tools \
-	--disable-android \
-	--disable-cups \
-	--disable-manpages \
-	--disable-sixaxis \
-	--disable-systemd \
-	--disable-test \
-	--disable-udev \
-
-TARGET_CPPFLAGS += \
-	-D_GNU_SOURCE
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/bluez-examples/install
-	$(INSTALL_DIR) $(1)/usr/bin/bluez
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/test/* $(1)/usr/bin/bluez/
-endef
-
-define Package/bluez-libs/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.so.* $(1)/usr/lib/
-endef
-
-define Package/bluez-utils/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/bccmd $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/bluemoon $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/btmon $(1)/usr/bin/
-	$(CP) $(PKG_BUILD_DIR)/tools/btmgmt $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/ciptool $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/hciattach $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/hciconfig $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/hcidump $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/hcitool $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/hex2hcd $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/l2ping $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/l2test $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/rctest $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/rfcomm $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/sdptool $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/attrib/gatttool $(1)/usr/bin/
-endef
-
-define Package/bluez-daemon/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/bluetoothd $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/bluetoothctl $(1)/usr/bin/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/obexd $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DATA) ./files/bluetooth.config $(1)/etc/config/bluetooth
-	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d/
-	$(INSTALL_DATA) ./files/bluetooth.dbus $(1)/etc/dbus-1/system.d/bluetooth.conf
-	$(INSTALL_DIR) $(1)/etc/bluetooth
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/main.conf $(1)/etc/bluetooth/main.conf
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/profiles/network/network.conf $(1)/etc/bluetooth/network.conf
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/profiles/input/input.conf $(1)/etc/bluetooth/input.conf
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/profiles/proximity/proximity.conf $(1)/etc/bluetooth/proximity.conf
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/bluetoothd.init $(1)/etc/init.d/bluetoothd
-	$(INSTALL_BIN) ./files/bluez-bccmd.init $(1)/etc/init.d/bluez-bccmd
-	$(INSTALL_DIR) $(1)/etc/bluetooth
-	$(INSTALL_DATA) ./files/csr8x11-a12-bt4.2-patch.psr $(1)/etc/bluetooth/
-	$(INSTALL_DATA) ./files/csr8x11-coex.psr $(1)/etc/bluetooth/
-endef
-
-$(eval $(call BuildPackage,bluez-examples))
-$(eval $(call BuildPackage,bluez-libs))
-$(eval $(call BuildPackage,bluez-utils))
-$(eval $(call BuildPackage,bluez-daemon))

feeds/bluetooth-csr/bluez/files/bluetooth.config

@@ -1,15 +0,0 @@
-config bluetoothd
-#	option config	/etc/bluetooth/main.conf
-	option enabled	1
-
-config hciattach
-	option initspeed	115200
-	option tty	ttyS1
-	option type	csr
-	option speed	115200
-	option flow	noflow
-	option enabled 	0
-
-config rfcomm
-#	option config	/etc/bluetooth/rfcomm.conf
-	option enabled	0

feeds/bluetooth-csr/bluez/files/bluetooth.dbus

@@ -1,37 +0,0 @@
-<!-- This configuration file specifies the required security policies
-     for Bluetooth core daemon to work. -->
-
-<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
-<busconfig>
-
-  <!-- ../system.conf have denied everything, so we just punch some holes -->
-
-  <policy user="root">
-    <allow own="org.bluez"/>
-  </policy>
-
-  <policy at_console="true">
-    <allow send_path="/"/>
-    <allow send_path="/org/bluez"/>
-
-    <allow send_destination="org.bluez.Manager"/>
-    <allow receive_sender="org.bluez.Manager"/>
-
-    <allow send_destination="org.bluez.Adapter"/>
-    <allow receive_sender="org.bluez.Adapter"/>
-
-    <allow send_destination="org.bluez.Device"/>
-    <allow receive_sender="org.bluez.Device"/>
-
-    <allow send_destination="org.bluez.Service"/>
-    <allow receive_sender="org.bluez.Service"/>
-
-    <allow send_destination="org.bluez.Database"/>
-    <allow receive_sender="org.bluez.Database"/>
-
-    <allow send_destination="org.bluez.Security"/>
-    <allow receive_sender="org.bluez.Security"/>
-  </policy>
-
-</busconfig>

feeds/bluetooth-csr/bluez/files/bluetoothd.init

@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2007 OpenWrt.org
-
-#start after dbus (60)
-START=62
-USE_PROCD=1
-PROG=/usr/bin/bluetoothd
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "$PROG" -n
-	procd_close_instance
-}

feeds/bluetooth-csr/bluez/files/bluez-bccmd.init

@@ -1,43 +0,0 @@
-#!/bin/sh /etc/rc.common
-. /lib/ar71xx.sh
-
-START=63
-
-bt_up(){
-  hciconfig hci0 up
-
-  count=5
-  while [ $count -gt 0 ]
-  do
-    if hciconfig hci0 lestates >/dev/null; then
-      break;
-    fi
-    let count=$count-1
-    sleep 1
-  done
-
-  if [ $count -eq 0 ];then
-    echo "Failed to enable hci0" >> /tmp/log/bccmd
-  fi
-}
-
-bccmd_init_csr8x11() {
-  bt_up
-  bccmd -t hci -d hci0 psload /etc/bluetooth/csr8x11-a12-bt4.2-patch.psr
-  bccmd -t hci -d hci0 psload /etc/bluetooth/csr8x11-coex.psr
-  bccmd -t hci -d hci0 warmreset
-  bt_up
-}
-
-start() {
-  board_name=$(ar71xx_board_name)
-
-  case "$board_name" in
-  cus531mp3|\
-  cus531mp3-dual|\
-  cus531mp3-nand)
-    bccmd_init_csr8x11
-    ;;
-  esac
-}
-

feeds/bluetooth-csr/bluez/files/csr8x11-a12-bt4.2-patch.psr

@@ -1,50 +0,0 @@
-// explicit, PSKEY_HCI_LMP_LOCAL_VERSION (0x010d, 269), 1 words
-&010d = 0808
-
-// explicit, PSKEY_LMP_REMOTE_VERSION (0x010e, 270), 1 words
-&010e = 0008
-
-// patch_hardware_0, PSKEY_PATCH50 (0x212c, 8492), 56 words
-&212c = 0000 f001 0617 0513 0118 ff2b ff0e 1a00 2818 009e 081b f100 8888 24f0 f925 f821 0a17 0184 0cf0 0117 0013 0009 02a4 fb25 fa21 f915 f811 fb55 fa61 09e0 ff84 10f0 0117 0013 0009 02a4 f935 f841 f925 f821 0f1b 0712 10a4 0494 0712 e151 0722 f915 f811 0018 ff2b ff0e f000 0518 00e2 5a79
-
-// patch_hardware_1, PSKEY_PATCH51 (0x212d, 8493), 21 words
-&212d = 0002 968a 0863 f925 f821 0757 0663 e099 02ec 05e0 f915 0727 f815 0627 0218 ff2b ff0e 9700 8d18 00e2 7e34
-
-// patch_hardware_2, PSKEY_PATCH52 (0x212e, 8494), 16 words
-&212e = 0002 0b5a 0100 7834 0040 0327 0223 f815 e311 0218 ff2b ff0e 0b00 5e18 00e2 59c1
-
-// patch_hardware_3, PSKEY_PATCH53 (0x212f, 8495), 17 words
-&212f = 0000 7315 0084 04f0 0800 0014 03e0 f800 1215 0b27 0018 ff2b ff0e 7300 1818 00e2 0549
-
-// patch_hardware_4, PSKEY_PATCH54 (0x2130, 8496), 21 words
-&2130 = 0001 53f8 0817 0e27 0c00 6384 07f0 0118 ff2b ff0e 5400 0918 00e2 0917 0118 ff2b ff0e 5400 fb18 00e2 91f6
-
-// patch_hardware_5, PSKEY_PATCH55 (0x2131, 8497), 49 words
-&2131 = 0002 c0d5 0423 05f4 031b 0012 0280 1df0 021b 0916 1000 00c4 1ef0 0916 03c4 1bf4 031b 0012 0280 17f4 0380 15f4 0480 13f4 0580 11f4 0680 0ff4 0b80 0df4 0d80 0bf4 019c fb00 6719 0d9e 0218 ff2b ff0e c200 8c18 00e2 0218 ff2b ff0e c100 de18 00e2 c5cf
-
-// patch_hardware_6, PSKEY_PATCH56 (0x2132, 8498), 42 words
-&2132 = 0003 243f f40b 0827 0923 e019 0916 01b4 0926 0318 ff2b ff0e 2400 4218 00e2 fa0b 3d14 0327 0114 0227 0014 0127 0027 081b 0816 0218 ff2b ff0e f700 fd18 009e e111 081b 0816 0218 ff2b ff0e 3300 ff18 009e fa0f 40f2
-
-// patch_hardware_7, PSKEY_PATCH57 (0x2133, 8499), 23 words
-&2133 = 0003 254e 02c0 0916 1000 00c4 02f4 02b0 0916 fec4 e1b1 0922 0816 0318 ff2b ff0e 2500 5218 8000 00c0 08f2 00e2 e402
-
-// patch_hardware_8, PSKEY_PATCH58 (0x2134, 8500), 16 words
-&2134 = 0003 21ca fa0b 0227 0323 e019 0916 01b4 0926 0318 ff2b ff0e 2200 cd18 00e2 22dc
-
-// patch_hardware_9, PSKEY_PATCH59 (0x2135, 8501), 18 words
-&2135 = 0000 55e2 09f4 0218 ff2b ff0e 2c00 a718 009e 0314 fc0f 0018 ff2b ff0e 5600 0118 00e2 a008
-
-// patch_hardware_10, PSKEY_PATCH60 (0x2136, 8502), 30 words
-&2136 = 0004 0d80 1aa4 0418 ff2b ff0e 1d00 ba18 009e 0184 0d2c 0013 8f00 89d0 0117 bf00 d6d4 0318 ff2b ff0e 2700 4218 009e 0418 ff2b ff0e 0e00 8418 00e2 6855
-
-// patch_hardware_11, PSKEY_PATCH61 (0x2137, 8503), 22 words
-&2137 = 0002 4da5 0118 ff2b ff0e 6200 c518 009e 031b 2b22 fcc4 2c26 0114 e700 f025 0218 ff2b ff0e 4e00 a818 00e2 8dfc
-
-// patch_sched_get_or_peek_message, PSKEY_PATCH123 (0x220b, 8715), 49 words
-&220b = fa0b 0717 0484 2cf0 0617 0690 e119 0c00 d438 041a 001a 022b 23f4 0116 0184 20f0 0216 0327 1df4 e119 0016 0784 19f0 e500 ab15 8000 0054 0100 c018 ff2b fe27 0317 ff0e fe9f e199 0cf4 7d00 f214 0127 0014 0027 0317 000e 019f 0014 021b 0226 fa0f 8392
-
-// patch_spare1, PSKEY_PATCH155 (0x222b, 8747), 60 words
-&222b = e70b 1627 a100 8514 0227 0214 0127 6b00 d814 0427 0214 0327 0417 fe27 0317 ff27 1613 0230 0814 0027 e415 0534 ff0e fe9f 0513 0009 01a4 e015 7fc4 7f84 1bf0 0617 1584 18f0 161b 0116 010e 029f e119 049a 11f4 0116 4184 0ef0 e500 ac11 8000 0050 0100 c014 ff27 fe23 0816 ff0e fe9f 0114 02e0 0014 e70f 4d65
-
-// patch_spare2, PSKEY_PATCH156 (0x222c, 8748), 40 words
-&222c = f40b 0927 2900 d414 0427 0314 0327 3500 ea14 0627 0314 0527 2900 9614 0827 0414 0727 0917 0110 070e 089f 0917 030e 049f 0617 fe27 0517 ff27 7f14 0027 1514 0127 2a14 0227 0114 0913 ff0e fe9f f40f 3478

feeds/bluetooth-csr/bluez/files/csr8x11-coex.psr

@@ -1,38 +0,0 @@
-// Set the crystal frequency to 26MHz
-&01fe = 6590
-
-// PSKEY_COEX_SCHEME
-// 7 = Use Unity-e.
-&2480 = 0007
-
-// Signal Configuration
-// --------------------
-// PSKEY_COEX_PIO_UNITY_3_BT_ACTIVE
-// BT_ACTIVE (PIO=0, polarity=active high)
-&2483 = 0000 0001
-
-// PSKEY_COEX_PIO_UNITY_3_BT_STATUS
-// BT_STATUS (PIO=5, polarity=active high)
-&2484 = 0005 0001
-
-// PSKEY_COEX_PIO_UNITY_3_WLAN_DENY
-// WLAN_DENY (PIO=1, polarity=active high)
-&2485 = 0001 0001
-
-// Priority Configuration
-// ----------------------
-// PSKEY_coex_transaction_priority_table
-&2488 = 0000 0000 0000 0000 0000 0001 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001
-
-// PSKEY_COEX_BLE_TRANSACTION_PRIORITY_TABLE
-&2493 = 0000 0000 0000 0000 0000 0000 0000 0000 0001 0001 0001 0000 0000 0000 0000 0001
-
-// PSKEY_COEX_UNITY_EXPRESS_TIMINGS
-//   BT_ACTIVE lead time - 20 us
-//   BT_STATUS lead time - 12 us
-&248a = 0014 000c
-
-
-//Disable clock request on PIO2
-&0246 = 0000
-

feeds/bluetooth-csr/bluez/files/givepin

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-# Write bluetooth PIN number here:
-pin=
-
-if [ -z "$pin" ]; then
-	msg="Set bluetooth PIN in file $0"
-	logger -p user.err "$msg"
-	for i in /dev/pts/* ; do
-		[ -w $i ] && echo "$msg" > $i
-	done
-else
-	echo "PIN:$pin"
-fi

feeds/bluetooth-csr/bluez/patches/200-uart-speed.patch

@@ -1,40 +0,0 @@
---- a/tools/hciattach.c
-+++ b/tools/hciattach.c
-@@ -101,20 +101,37 @@ int uart_speed(int s)
- 		return B230400;
- 	case 460800:
- 		return B460800;
-+/* FIX: Not all platform support this high serial speed
-+   claudyus84 @gamil.com
-+*/
-+#ifdef B500000
- 	case 500000:
- 		return B500000;
-+#endif
-+#ifdef B576000
- 	case 576000:
- 		return B576000;
-+#endif
-+#ifdef B921600
- 	case 921600:
- 		return B921600;
-+#endif
-+#ifdef B1000000
- 	case 1000000:
- 		return B1000000;
-+#endif
-+#ifdef B1152000
- 	case 1152000:
- 		return B1152000;
-+#endif
-+#ifdef B1500000
- 	case 1500000:
- 		return B1500000;
-+#endif
-+#ifdef B2000000
- 	case 2000000:
- 		return B2000000;
-+#endif
- #ifdef B2500000
- 	case 2500000:
- 		return B2500000;

feeds/bluetooth-csr/bluez/patches/201-readline.patch

@@ -1,48 +0,0 @@
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -2441,7 +2441,7 @@ unit_tests = $(am__append_35) unit/test-
- @CLIENT_TRUE@					monitor/uuid.h monitor/uuid.c
- 
- @CLIENT_TRUE@client_bluetoothctl_LDADD = gdbus/libgdbus-internal.la @GLIB_LIBS@ @DBUS_LIBS@ \
--@CLIENT_TRUE@				-lreadline
-+@CLIENT_TRUE@				-lreadline -lncurses
- 
- @MONITOR_TRUE@monitor_btmon_SOURCES = monitor/main.c monitor/bt.h \
- @MONITOR_TRUE@				monitor/display.h monitor/display.c \
-@@ -2691,13 +2691,13 @@ unit_tests = $(am__append_35) unit/test-
- @READLINE_TRUE@				client/display.h
- 
- @READLINE_TRUE@attrib_gatttool_LDADD = lib/libbluetooth-internal.la \
--@READLINE_TRUE@			src/libshared-glib.la @GLIB_LIBS@ -lreadline
-+@READLINE_TRUE@			src/libshared-glib.la @GLIB_LIBS@ -lreadline -lncurses
- 
- @READLINE_TRUE@tools_obex_client_tool_SOURCES = $(gobex_sources) $(btio_sources) \
- @READLINE_TRUE@						tools/obex-client-tool.c
- 
- @READLINE_TRUE@tools_obex_client_tool_LDADD = lib/libbluetooth-internal.la \
--@READLINE_TRUE@						@GLIB_LIBS@ -lreadline
-+@READLINE_TRUE@						@GLIB_LIBS@ -lreadline -lncurses
- 
- @READLINE_TRUE@tools_obex_server_tool_SOURCES = $(gobex_sources) $(btio_sources) \
- @READLINE_TRUE@						tools/obex-server-tool.c
-@@ -2707,17 +2707,17 @@ unit_tests = $(am__append_35) unit/test-
- @READLINE_TRUE@				client/display.h client/display.c
- 
- @READLINE_TRUE@tools_bluetooth_player_LDADD = gdbus/libgdbus-internal.la \
--@READLINE_TRUE@				@GLIB_LIBS@ @DBUS_LIBS@ -lreadline
-+@READLINE_TRUE@				@GLIB_LIBS@ @DBUS_LIBS@ -lreadline -lncurses
- 
- @READLINE_TRUE@tools_obexctl_SOURCES = tools/obexctl.c \
- @READLINE_TRUE@				client/display.h client/display.c
- 
- @READLINE_TRUE@tools_obexctl_LDADD = gdbus/libgdbus-internal.la \
--@READLINE_TRUE@				@GLIB_LIBS@ @DBUS_LIBS@ -lreadline
-+@READLINE_TRUE@				@GLIB_LIBS@ @DBUS_LIBS@ -lreadline -lncurses
- 
- @READLINE_TRUE@tools_btmgmt_SOURCES = tools/btmgmt.c src/uuid-helper.c client/display.c
- @READLINE_TRUE@tools_btmgmt_LDADD = lib/libbluetooth-internal.la src/libshared-mainloop.la \
--@READLINE_TRUE@				-lreadline
-+@READLINE_TRUE@				-lreadline -lncurses
- 
- @EXPERIMENTAL_TRUE@tools_gatt_service_SOURCES = tools/gatt-service.c
- @EXPERIMENTAL_TRUE@tools_gatt_service_LDADD = @GLIB_LIBS@ @DBUS_LIBS@ gdbus/libgdbus-internal.la

feeds/bluetooth-csr/bluez/patches/202-fix-unknown-type-a2dp_ldac_t.patch

@@ -1,14 +0,0 @@
---- a/profiles/audio/a2dp-codecs.h
-+++ b/profiles/audio/a2dp-codecs.h
-@@ -234,6 +234,11 @@ typedef struct {
- 	uint8_t channel_mode:4;
- } __attribute__ ((packed)) a2dp_aptx_t;
- 
-+typedef struct {
-+	a2dp_vendor_codec_t info;
-+	uint8_t unknown[2];
-+} __attribute__ ((packed)) a2dp_ldac_t;
-+
- #else
- #error "Unknown byte order"
- #endif

feeds/bluetooth-csr/bluez/patches/203-Modify-CSR-pskey-storage-location.patch

@@ -1,14 +0,0 @@
---- a/tools/bccmd.c
-+++ b/tools/bccmd.c
-@@ -48,7 +48,7 @@
- #define CSR_STORES_PSF		(0x0002)
- #define CSR_STORES_PSROM	(0x0004)
- #define CSR_STORES_PSRAM	(0x0008)
--#define CSR_STORES_DEFAULT	(CSR_STORES_PSI | CSR_STORES_PSF)
-+#define CSR_STORES_DEFAULT	0
-
- #define CSR_TYPE_NULL		0
- #define CSR_TYPE_COMPLEX	1
---
-2.1.4
-

feeds/bluetooth-csr/bluez/patches/204-Add-PIO32-setting-oparation.patch

@@ -1,93 +0,0 @@
-diff --git a/tools/bccmd.c b/tools/bccmd.c
-old mode 100644
-new mode 100755
-index 6bc28da..1605d1c
---- a/tools/bccmd.c
-+++ b/tools/bccmd.c
-@@ -636,6 +636,78 @@ static int opt_pskey(int argc, char *argv[], uint16_t *stores, int *reset, int *
- 	return optind;
- }
- 
-+int inline serialize_u32(uint8_t *array, uint32_t val32)
-+{
-+	if (NULL == array)
-+		return -1;
-+
-+	array[0] = (val32 & 0xff0000) >> 16;
-+	array[1] = val32 >> 24;
-+	array[2] = val32 & 0xff;
-+	array[3] = (val32 & 0xff00) >> 8;
-+
-+	return 0;
-+}
-+
-+int inline deserialize_u32(uint8_t *array, uint32_t *pval32)
-+{
-+	if (NULL == array || NULL == pval32)
-+		return -1;
-+
-+	*pval32 = (array[1]<<24)
-+				| (array[0]<<16)
-+				| (array[3]<<8)
-+				| array[2];
-+	return 0;
-+}
-+
-+static int setpio32(int transport, uint32_t varID, uint32_t mask, uint32_t bits)
-+{
-+	uint8_t array[32];
-+	uint8_t *ptr = NULL;
-+	uint32_t result = 0;
-+	int err;
-+
-+	memset(array, 0, sizeof(array));
-+	ptr = array;
-+
-+	serialize_u32(ptr, mask);
-+	ptr += 4;
-+
-+	serialize_u32(ptr, bits);
-+
-+	err = transport_write(transport, varID, array, 12);
-+	if (err < 0)
-+		return err;
-+
-+	deserialize_u32(&array[8], &result);
-+	printf("result: 0x%x\n", result);
-+
-+	return 0;
-+
-+}
-+
-+
-+static int cmd_pio32set(int transport, int argc, char *argv[])
-+{
-+	uint32_t varID;
-+	uint32_t mask;
-+	uint32_t bits;
-+
-+	argc--;
-+	argv++;
-+
-+	if (3 != argc)
-+		return -1;
-+
-+	varID = strtol(argv[0] + 2, NULL, 16);
-+	mask = strtol(argv[1] + 2, NULL, 16);
-+	bits = strtol(argv[2] + 2, NULL, 16);
-+
-+	return setpio32(transport, varID, mask, bits);
-+}
-+
-+
- #define OPT_PSKEY(min, max, stores, reset, help) \
- 		opt_pskey(argc, argv, (stores), (reset), (help)); \
- 		argc -= optind; argv += optind; optind = 0; \
-@@ -1112,6 +1184,7 @@ static struct {
- 	{ "psread",    cmd_psread,    NULL,                  "Read all PS keys"               },
- 	{ "psload",    cmd_psload,    "<file>",              "Load all PS keys from PSR file" },
- 	{ "pscheck",   cmd_pscheck,   "<file>",              "Check PSR file"                 },
-+	{ "pio32set",  cmd_pio32set,  "<VarID> <mask> <bits>","Set value for PIO32 register"   },
- 	{ "adc",       cmd_adc,       "<mux>",               "Read ADC value of <mux> input"  },
- 	{ NULL }
- };

feeds/bluetooth-csr/bluez/patches/205-Support-full-radio-test.patch

@@ -1,50 +0,0 @@
-diff --git a/tools/bccmd.c b/tools/bccmd.c
-index 1605d1c..5655bb5 100755
---- a/tools/bccmd.c
-+++ b/tools/bccmd.c
-@@ -555,6 +555,37 @@ static int cmd_radiotest(int transport, int argc, char *argv[])
- 	return transport_write(transport, CSR_VARID_RADIOTEST, array, 8);
- }
- 
-+static int cmd_fullradiotest(int transport, int argc, char *argv[])
-+{
-+	uint8_t array[8];
-+	uint16_t testID;
-+	uint16_t word1;
-+	uint16_t word2;
-+	uint16_t word3;
-+
-+	OPT_HELP(4, NULL);
-+
-+	testID = atoi(argv[0]);
-+	word1 = atoi(argv[1]);
-+	word2 = atoi(argv[2]);
-+	word3 = atoi(argv[3]);
-+
-+	printf("TestID %u, word1 %u, word2 %u, word3 %u\n",
-+		testID, word1, word2, word3);
-+
-+	memset(array, 0, sizeof(array));
-+	array[0] = testID & 0xff;
-+	array[1] = testID >> 8;
-+	array[2] = word1 & 0xff;
-+	array[3] = word1 >> 8;
-+	array[4] = word2 & 0xff;
-+	array[5] = word2 >> 8;
-+	array[6] = word3 & 0xff;
-+	array[7] = word3 >> 8;
-+
-+	return transport_write(transport, CSR_VARID_RADIOTEST, array, 8);
-+}
-+
- static int cmd_memtypes(int transport, int argc, char *argv[])
- {
- 	uint8_t array[8];
-@@ -1176,6 +1207,7 @@ static struct {
- 	{ "hoppingon", cmd_hoppingon, "",                    "Revert to channel hopping"      },
- 	{ "rttxdata1", cmd_rttxdata1, "<freq> <level>",      "TXData1 radio test"             },
- 	{ "radiotest", cmd_radiotest, "<freq> <level> <id>", "Run radio tests"                },
-+	{ "fullradiotest", cmd_fullradiotest,"<id> <w1> <w2> <w3>", "Run full radio tests"    },
- 	{ "memtypes",  cmd_memtypes,  NULL,                  "Get memory types"               },
- 	{ "psget",     cmd_psget,     "<key>",               "Get value for PS key"           },
- 	{ "psset",     cmd_psset,     "<key> <value>",       "Set value for PS key"           },

feeds/bluetooth-csr/bluez/patches/206-Fix-crash-if-uhid-is-not-enabled

@@ -1,29 +0,0 @@
-Index: bluez-5.37/profiles/input/hog.c
-===================================================================
---- bluez-5.37.orig/profiles/input/hog.c
-+++ bluez-5.37/profiles/input/hog.c
-@@ -107,8 +107,13 @@ static struct hog_device *hog_device_new
- 							product, version);
- 
- 	dev = new0(struct hog_device, 1);
--	dev->device = btd_device_ref(device);
- 	dev->hog = bt_hog_new_default(name, vendor, product, version, prim);
-+	if (!dev->hog) {
-+		free(dev);
-+		return NULL;
-+	}
-+
-+	dev->device = btd_device_ref(device);
- 
- 	/*
- 	 * TODO: Remove attio callback and use .accept once using
-@@ -189,6 +194,9 @@ static int hog_probe(struct btd_service
- 			continue;
- 
- 		dev = hog_device_new(device, prim);
-+		if (!dev)
-+			break;
-+
- 		btd_service_set_user_data(service, dev);
- 		return 0;
- 	}

feeds/bluetooth-csr/csr8811/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=csr8811
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=John Crispin <john@phrozen.org>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/csr8811
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TIP CSR8811 support package
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile/Default
-
-endef
-Build/Compile = $(Build/Compile/Default)
-
-define Package/csr8811/install
-	$(CP) ./files/* $(1)
-endef
-
-$(eval $(call BuildPackage,csr8811))

feeds/bluetooth-csr/csr8811/files/etc/init.d/csr8811

@@ -1,9 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-
-boot() {
-        bccmd -t bcsp -b 115200 -d /dev/ttyMSM1 psload -r /lib/firmware/CSR8811/pb-207-csr8x11-rev8.psr
-        sleep 1
-        hciattach -s 115200 /dev/ttyMSM1 any 115200
-}

feeds/bluetooth-csr/csr8811/files/lib/firmware/CSR8811/pb-207-csr8x11-rev8.psr

@@ -1,320 +0,0 @@
-// =============================================================================
-// 
-//  Copyright (c) 2015 - 2017 Qualcomm Technologies International, Ltd.
-//  All Rights Reserved.
-//  Qualcomm Technologies International, Ltd. Confidential and Proprietary.
-//  report this in case of problems:
-//   $Revision: #8 $
-//   Built Mon Feb 20 11:33:32 2017 GMT
-//   Checked-in $DateTime: 2017/02/20 11:36:26 $
-//   $File: //depot/bc/gemini-a12/dev/patches/10520/pb-207.psr $
-// 
-// Patch is for build 10520 gem_5hci_rom_bt4.1_gemA12_1407301204_dspm_encr128
-// 
-// Issues patched: B-158094, B-169261, B-171616, B-174351, B-176411,
-//                 B-179448, B-180762, B-184008, B-206751, B-208678,
-//                 B-216310, B-220605, B-223811
-// 
-// Documentation from pb-207.pb
-// ----------------------------
-// 
-// General purpose patch and PSKEY bundle for CSR8811
-// and CSR8311 A12 BT4.2 (build ID 10520).
-// 
-// Documentation from pb-173-common.pb
-// -----------------------------------
-// 
-// General patch bundle for Gemini-A12 (build ID 10520)
-// Patches and keys in here should be common to all
-// package variants.
-// 
-// Documentation from report_bt4p2.pb
-// ----------------------------------
-// 
-// Issues patched: B-174351
-// 
-// Report BT version 4.2
-// 
-// Documentation from patch_ulp_adv_avg_to_calc.xap
-// ------------------------------------------------
-// 
-// Issues patched: B-171616
-// 
-// BlueCore can be configured through BCCMDVARID_BLE_CONFIG_ADV_RSSI_AVG_PARAM
-// to report the advertising rssi average through LE ADVERTISING REPORT to the
-// host for a given PEER LE device.
-// For more information, See CS-317256-AN.
-// 
-// If the BlueCore is unable to receive a LE ADVERTISING REPORT from the PEER
-// before a configured average rssi supervision timeout, then the BlueCore
-// should send a LE ADVERTISING REPORT with rssi value equal to -127 conveying
-// that the PEER is out of the range; however, it fails to do this.
-// 
-// Documentation from patch_ble_scan_deaf.xap
-// ------------------------------------------
-// 
-// Issues patched: B-158094
-// 
-// When BlueCore is asked to do BLE scanning, it scans for a window
-// approximately 2.5% shorter than asked for. Generally, this does
-// not cause noticeable effects; sometimes BLE adverts can be missed
-// making connection initialisation between two BLE devices take
-// somewhat longer than expected. In pathological cases, especially
-// if the scan window is long, connections may fail to be made entirely.
-// 
-// Documentation from patch_usb_suspend_deep_sleep.xap
-// ---------------------------------------------------
-// 
-// Issues patched: B-176411
-// 
-// When BlueCore device is bus powered and is in USB suspend mode, 
-// the current consumption is approximately 8 mA which is higher 
-// than the expected current of 250 uA
-// 
-// Documentation from patch_tx_if_reduction.xap
-// --------------------------------------------
-// 
-// Issues patched: B-169261
-// 
-// When a BlueCore7 device is configured to use a +/-500 kHz transmit IF, this
-// can be overridden and a +/-375 kHz IF used instead. This reduces the
-// bandwidthof the transmit spectrum providing a greater margin in a Chinese
-// regulatory test.
-// Only transmit IFs of +/-500 kHz may be reduced; if BlueCore7 is configured to
-// use a TX IF of +/-1 MHz IF that will remain unchanged.
-// 
-// Documentation from coex_shutdown.xap
-// ------------------------------------
-// 
-// Issues patched: B-208678
-// 
-// With Coexistence Unity-3 scheme, If the WLAN_DENY signal is asserted during
-// the initial phase of an adaptive frequency hopping(AFH) scan, the Bluecore
-// device fails to deassert its BT_ACTIVE signal
-// 
-// Documentation from patch_access_address.xap
-// -------------------------------------------
-// 
-// Issues patched: B-206751
-// 
-// BlueCore devices may generate access addresses that only 
-// have one bit transition in the 6 most significant bits.
-// The problem is seen on access addresses that have the most 
-// significant bit set to one and only have one bit transition 
-// in the 6 most significant bits.
-// 
-// Furthermore, the access address, whilst not identical to the
-// advertising channel packets’ Access Address, may differ by 
-// only one bit.
-// 
-// Documentation from patch_sched_get_or_peek_message.c
-// ----------------------------------------------------
-// 
-// Issues patched: B-220605
-// 
-// During the crossover of a locally initiated 
-// LMP_unsniff_req and peer initiated LMP_sniff_subrate_req,
-// Bluecore responds with LMP_Sniff_Subrate_Rsp even if it
-// has initiated LMP_unsniff. This probably confuses peer and
-// peer stops responding, leading to a timeout.
-// 
-// Documentation from patch_sched_get_or_peek_message_part2.c
-// ----------------------------------------------------------
-// 
-// Issues patched: B-220605
-// 
-// During the crossover of a locally initiated 
-// LMP_unsniff_req and peer initiated LMP_sniff_subrate_req,
-// Bluecore responds with LMP_Sniff_Subrate_Rsp even if it
-// has initiated LMP_unsniff. This probably confuses peer and
-// peer stops responding, leading to a timeout.
-// 
-// Documentation from patch_ble_advt_restart.xap
-// ---------------------------------------------
-// 
-// Issues patched: B-223811
-// 
-// When advertisements are disabled before the expiry of the interval
-// and enabled immediately the advertisements are not sent before the
-// expiry of the advertising interval
-// 
-// Documentation from patch_whitelist_connection_status.xap
-// --------------------------------------------------------
-// 
-// Issues patched: B-180762
-// 
-// If a BlueCore device attempts but fails to form a Low Energy (LE) connection
-// to a remote slave using the whitelist, it will make no further attempts to
-// initiate a connection to that slave until either the BlueCore is reset or the
-// slave is removed and re-added to the whitelist.
-// 
-// Documentation from patch_semp2.xap
-// ----------------------------------
-// 
-// Issues patched: B-184008
-// 
-// If HCI_SET_EVENT_MASK_PAGE_2 command is sent with wrong parameters
-// to Bluecore device, it returns error code
-// 'INVALID_HCI_COMMAND_PARAMETERS'. It should return error code
-// 'UNKNOWN_HCI_COMMAND'.
-// 
-// Documentation from patch_disc_ll_pdu.xap
-// ----------------------------------------
-// 
-// Issues patched: B-179448
-// 
-// If a BlueCore device in the Connection State (regardless if in master or
-// slave role) receives an unexpected Data Channel PDU from the peer Link Layer
-// during the encryption start or encryption pause procedure, it does not exit 
-// the Connection State and does not notify the Host with error code 
-// "Connection Terminated Due to MIC Failure (0x3d)".
-// 
-// Documentation from patch_fsm_shared_patchpoint.c
-// ------------------------------------------------
-// 
-// Issues patched: B-216310
-// 
-// In a particular scenario where the peer device retries a Role Switch
-// (after a failed Role Switch) without EPR sequence, the Hydra/BlueCore 
-// Devices do not handle the user data Start/Stop operation properly. 
-// As a result the user data does not resume after the procedure is finished.
-// 
-// Version information for input files
-// -----------------------------------
-// 
-// Created by patchmaker.pl Revision: #68  Date: 2016/01/18 
-// 
-// Input file: pb-207.pb
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/pb-207.pb
-// File revision: 4
-// 
-// Input file: pb-173-common.pb
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/pb-173-common.pb
-// File revision: 7
-// 
-// Input file: report_bt4p2.pb
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/report_bt4p2.pb
-// File revision: 1
-// 
-// Input file: patch_ulp_adv_avg_to_calc.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_ulp_adv_avg_to_calc.xap
-// File revision: 4
-// 
-// Input file: ../patch_utils.inc
-// Depot file: //depot/bc/gemini-a12/dev/patches/patch_utils.inc
-// File revision: 1
-// 
-// Input file: patch_ble_scan_deaf.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_ble_scan_deaf.xap
-// File revision: 3
-// 
-// Input file: patch_usb_suspend_deep_sleep.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_usb_suspend_deep_sleep.xap
-// File revision: 3
-// 
-// Input file: patch_tx_if_reduction.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_tx_if_reduction.xap
-// File revision: 1
-// 
-// Input file: coex_shutdown.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/coex_shutdown.xap
-// File revision: 3
-// 
-// Input file: patch_access_address.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_access_address.xap
-// File revision: 2
-// 
-// Input file: patch_sched_get_or_peek_message.c
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_sched_get_or_peek_message.c
-// File revision: 3
-// 
-// Input file: patch_sched_get_or_peek_message_part2.c
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_sched_get_or_peek_message_part2.c
-// File revision: 2
-// 
-// Input file: patch_ble_advt_restart.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_ble_advt_restart.xap
-// File revision: 2
-// 
-// Input file: patch_whitelist_connection_status.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_whitelist_connection_status.xap
-// File revision: 4
-// 
-// Input file: patch_semp2.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_semp2.xap
-// File revision: 3
-// 
-// Input file: patch_disc_ll_pdu.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_disc_ll_pdu.xap
-// File revision: 4
-// 
-// Input file: patch_fsm_shared_patchpoint.c
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_fsm_shared_patchpoint.c
-// File revision: 3
-
-// explicit, PSKEY_HCI_LMP_LOCAL_VERSION (0x010d, 269), 1 words
-&010d = 0808
-
-// explicit, PSKEY_LMP_REMOTE_VERSION (0x010e, 270), 1 words
-&010e = 0008
-
-// patch_hardware_0, PSKEY_PATCH50 (0x212c, 8492), 56 words
-&212c = 0000 f001 0617 0513 0118 ff2b ff0e 1a00 2818 009e 081b f100 8888 24f0 f925 f821 0a17 0184 0cf0 0117 0013 0009 02a4 fb25 fa21 f915 f811 fb55 fa61 09e0 ff84 10f0 0117 0013 0009 02a4 f935 f841 f925 f821 0f1b 0712 10a4 0494 0712 e151 0722 f915 f811 0018 ff2b ff0e f000 0518 00e2 5a79
-
-// patch_hardware_1, PSKEY_PATCH51 (0x212d, 8493), 21 words
-&212d = 0002 968a 0863 f925 f821 0757 0663 e099 02ec 05e0 f915 0727 f815 0627 0218 ff2b ff0e 9700 8d18 00e2 7e34
-
-// patch_hardware_2, PSKEY_PATCH52 (0x212e, 8494), 16 words
-&212e = 0002 0b5a 0100 7834 0040 0327 0223 f815 e311 0218 ff2b ff0e 0b00 5e18 00e2 59c1
-
-// patch_hardware_3, PSKEY_PATCH53 (0x212f, 8495), 17 words
-&212f = 0000 7315 0084 04f0 0800 0014 03e0 f800 1215 0b27 0018 ff2b ff0e 7300 1818 00e2 0549
-
-// patch_hardware_4, PSKEY_PATCH54 (0x2130, 8496), 21 words
-&2130 = 0001 53f8 0817 0e27 0c00 6384 07f0 0118 ff2b ff0e 5400 0918 00e2 0917 0118 ff2b ff0e 5400 fb18 00e2 91f6
-
-// patch_hardware_5, PSKEY_PATCH55 (0x2131, 8497), 49 words
-&2131 = 0002 c0d5 0423 05f4 031b 0012 0280 1df0 021b 0916 1000 00c4 1ef0 0916 03c4 1bf4 031b 0012 0280 17f4 0380 15f4 0480 13f4 0580 11f4 0680 0ff4 0b80 0df4 0d80 0bf4 019c fb00 6719 0d9e 0218 ff2b ff0e c200 8c18 00e2 0218 ff2b ff0e c100 de18 00e2 c5cf
-
-// patch_hardware_6, PSKEY_PATCH56 (0x2132, 8498), 42 words
-&2132 = 0003 243f f40b 0827 0923 e019 0916 01b4 0926 0318 ff2b ff0e 2400 4218 00e2 fa0b 3d14 0327 0114 0227 0014 0127 0027 081b 0816 0218 ff2b ff0e f700 fd18 009e e111 081b 0816 0218 ff2b ff0e 3300 ff18 009e fa0f 40f2
-
-// patch_hardware_7, PSKEY_PATCH57 (0x2133, 8499), 23 words
-&2133 = 0003 254e 02c0 0916 1000 00c4 02f4 02b0 0916 fec4 e1b1 0922 0816 0318 ff2b ff0e 2500 5218 8000 00c0 08f2 00e2 e402
-
-// patch_hardware_8, PSKEY_PATCH58 (0x2134, 8500), 16 words
-&2134 = 0003 21ca fa0b 0227 0323 e019 0916 01b4 0926 0318 ff2b ff0e 2200 cd18 00e2 22dc
-
-// patch_hardware_9, PSKEY_PATCH59 (0x2135, 8501), 18 words
-&2135 = 0000 55e2 09f4 0218 ff2b ff0e 2c00 a718 009e 0314 fc0f 0018 ff2b ff0e 5600 0118 00e2 a008
-
-// patch_hardware_10, PSKEY_PATCH60 (0x2136, 8502), 30 words
-&2136 = 0004 0d80 1aa4 0418 ff2b ff0e 1d00 ba18 009e 0184 0d2c 0013 8f00 89d0 0117 bf00 d6d4 0318 ff2b ff0e 2700 4218 009e 0418 ff2b ff0e 0e00 8418 00e2 6855
-
-// patch_hardware_11, PSKEY_PATCH61 (0x2137, 8503), 22 words
-&2137 = 0002 4da5 0118 ff2b ff0e 6200 c518 009e 031b 2b22 fcc4 2c26 0114 e700 f025 0218 ff2b ff0e 4e00 a818 00e2 8dfc
-
-// patch_hardware_12, PSKEY_PATCH62 (0x2138, 8504), 19 words
-&2138 = 0002 0f22 0310 081b 0100 8022 0100 b012 04f4 0114 e019 0426 0218 ff2b ff0e 0f00 2618 00e2 bc41
-
-// patch_hardware_13, PSKEY_PATCH63 (0x2139, 8505), 12 words
-&2139 = 0002 0d95 0513 0100 b022 0218 ff2b ff0e 0f00 db18 00e2 7a40
-
-// patch_fsm_shared_patchpoint, PSKEY_PATCH121 (0x2209, 8713), 36 words
-&2209 = fc0b 0b13 0717 1d00 c184 1df0 081b 0016 6384 05f0 1380 17f0 0114 13e0 6084 13f0 0100 da80 0df0 0d1b 5d9a 0af4 b900 f014 0127 0214 0027 e315 0010 000e 019f 0014 0d1b 5d26 fc0f a1a6
-
-// patch_sched_get_or_peek_message, PSKEY_PATCH123 (0x220b, 8715), 49 words
-&220b = fa0b 0717 0484 2cf0 0617 0690 e119 0c00 d438 041a 001a 022b 23f4 0116 0184 20f0 0216 0327 1df4 e119 0016 0784 19f0 e500 ab15 8000 0054 0100 c018 ff2b fe27 0317 ff0e fe9f e199 0cf4 7d00 f214 0127 0014 0027 0317 000e 019f 0014 021b 0226 fa0f 8392
-
-// patch_spare1, PSKEY_PATCH155 (0x222b, 8747), 60 words
-&222b = e70b 1627 a100 8514 0227 0214 0127 6b00 d814 0427 0214 0327 0417 fe27 0317 ff27 1613 0230 0814 0027 e415 0534 ff0e fe9f 0513 0009 01a4 e015 7fc4 7f84 1bf0 0617 1584 18f0 161b 0116 010e 029f e119 049a 11f4 0116 4184 0ef0 e500 ac11 8000 0050 0100 c014 ff27 fe23 0816 ff0e fe9f 0114 02e0 0014 e70f 4d65
-
-// patch_spare2, PSKEY_PATCH156 (0x222c, 8748), 40 words
-&222c = f40b 0927 2900 d414 0427 0314 0327 3500 ea14 0627 0314 0527 2900 9614 0827 0414 0727 0917 0110 070e 089f 0917 030e 049f 0617 fe27 0517 ff27 7f14 0027 1514 0127 2a14 0227 0114 0913 ff0e fe9f f40f 3478
-&01fe = 6590
-//Interface, BCSP
-//&01f9 = 0001
-//Interface, H4
-&01f9 = 0003
-//Bit rate for 8811, 115200
-&01ea = 0001 c200

feeds/bluetooth/nrf52840/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=nrf52840
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=John Crispin <john@phrozen.org>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/nrf52840
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TIP NRF52840 support package
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile/Default
-
-endef
-Build/Compile = $(Build/Compile/Default)
-
-define Package/nrf52840/install
-	$(CP) ./files/* $(1)
-endef
-
-$(eval $(call BuildPackage,nrf52840))

feeds/bluetooth/nrf52840/files/etc/init.d/nrf52840

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-
-boot() {
-	. /lib/functions/system.sh
-	case $(board_name) in
-	edgecore,eap102)
-		echo 54 > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio54/direction
-		echo 0 > /sys/class/gpio/gpio54/value
-		echo 1 > /sys/class/gpio/gpio54/value
-		btmgmt --index 0 static-addr FF:02:03:04:05:FF
-		btmgmt --index 0 auto-power
-		hciconfig hci0 up
-		hcitool -i hci0 cmd 0x3f 0x006 
-		;;
-	esac
-}

feeds/bluetooth/nrf52840/files/lib/firmware/CSR8811/pb-207-csr8x11-rev8.psr

@@ -1,320 +0,0 @@
-// =============================================================================
-// 
-//  Copyright (c) 2015 - 2017 Qualcomm Technologies International, Ltd.
-//  All Rights Reserved.
-//  Qualcomm Technologies International, Ltd. Confidential and Proprietary.
-//  report this in case of problems:
-//   $Revision: #8 $
-//   Built Mon Feb 20 11:33:32 2017 GMT
-//   Checked-in $DateTime: 2017/02/20 11:36:26 $
-//   $File: //depot/bc/gemini-a12/dev/patches/10520/pb-207.psr $
-// 
-// Patch is for build 10520 gem_5hci_rom_bt4.1_gemA12_1407301204_dspm_encr128
-// 
-// Issues patched: B-158094, B-169261, B-171616, B-174351, B-176411,
-//                 B-179448, B-180762, B-184008, B-206751, B-208678,
-//                 B-216310, B-220605, B-223811
-// 
-// Documentation from pb-207.pb
-// ----------------------------
-// 
-// General purpose patch and PSKEY bundle for CSR8811
-// and CSR8311 A12 BT4.2 (build ID 10520).
-// 
-// Documentation from pb-173-common.pb
-// -----------------------------------
-// 
-// General patch bundle for Gemini-A12 (build ID 10520)
-// Patches and keys in here should be common to all
-// package variants.
-// 
-// Documentation from report_bt4p2.pb
-// ----------------------------------
-// 
-// Issues patched: B-174351
-// 
-// Report BT version 4.2
-// 
-// Documentation from patch_ulp_adv_avg_to_calc.xap
-// ------------------------------------------------
-// 
-// Issues patched: B-171616
-// 
-// BlueCore can be configured through BCCMDVARID_BLE_CONFIG_ADV_RSSI_AVG_PARAM
-// to report the advertising rssi average through LE ADVERTISING REPORT to the
-// host for a given PEER LE device.
-// For more information, See CS-317256-AN.
-// 
-// If the BlueCore is unable to receive a LE ADVERTISING REPORT from the PEER
-// before a configured average rssi supervision timeout, then the BlueCore
-// should send a LE ADVERTISING REPORT with rssi value equal to -127 conveying
-// that the PEER is out of the range; however, it fails to do this.
-// 
-// Documentation from patch_ble_scan_deaf.xap
-// ------------------------------------------
-// 
-// Issues patched: B-158094
-// 
-// When BlueCore is asked to do BLE scanning, it scans for a window
-// approximately 2.5% shorter than asked for. Generally, this does
-// not cause noticeable effects; sometimes BLE adverts can be missed
-// making connection initialisation between two BLE devices take
-// somewhat longer than expected. In pathological cases, especially
-// if the scan window is long, connections may fail to be made entirely.
-// 
-// Documentation from patch_usb_suspend_deep_sleep.xap
-// ---------------------------------------------------
-// 
-// Issues patched: B-176411
-// 
-// When BlueCore device is bus powered and is in USB suspend mode, 
-// the current consumption is approximately 8 mA which is higher 
-// than the expected current of 250 uA
-// 
-// Documentation from patch_tx_if_reduction.xap
-// --------------------------------------------
-// 
-// Issues patched: B-169261
-// 
-// When a BlueCore7 device is configured to use a +/-500 kHz transmit IF, this
-// can be overridden and a +/-375 kHz IF used instead. This reduces the
-// bandwidthof the transmit spectrum providing a greater margin in a Chinese
-// regulatory test.
-// Only transmit IFs of +/-500 kHz may be reduced; if BlueCore7 is configured to
-// use a TX IF of +/-1 MHz IF that will remain unchanged.
-// 
-// Documentation from coex_shutdown.xap
-// ------------------------------------
-// 
-// Issues patched: B-208678
-// 
-// With Coexistence Unity-3 scheme, If the WLAN_DENY signal is asserted during
-// the initial phase of an adaptive frequency hopping(AFH) scan, the Bluecore
-// device fails to deassert its BT_ACTIVE signal
-// 
-// Documentation from patch_access_address.xap
-// -------------------------------------------
-// 
-// Issues patched: B-206751
-// 
-// BlueCore devices may generate access addresses that only 
-// have one bit transition in the 6 most significant bits.
-// The problem is seen on access addresses that have the most 
-// significant bit set to one and only have one bit transition 
-// in the 6 most significant bits.
-// 
-// Furthermore, the access address, whilst not identical to the
-// advertising channel packets’ Access Address, may differ by 
-// only one bit.
-// 
-// Documentation from patch_sched_get_or_peek_message.c
-// ----------------------------------------------------
-// 
-// Issues patched: B-220605
-// 
-// During the crossover of a locally initiated 
-// LMP_unsniff_req and peer initiated LMP_sniff_subrate_req,
-// Bluecore responds with LMP_Sniff_Subrate_Rsp even if it
-// has initiated LMP_unsniff. This probably confuses peer and
-// peer stops responding, leading to a timeout.
-// 
-// Documentation from patch_sched_get_or_peek_message_part2.c
-// ----------------------------------------------------------
-// 
-// Issues patched: B-220605
-// 
-// During the crossover of a locally initiated 
-// LMP_unsniff_req and peer initiated LMP_sniff_subrate_req,
-// Bluecore responds with LMP_Sniff_Subrate_Rsp even if it
-// has initiated LMP_unsniff. This probably confuses peer and
-// peer stops responding, leading to a timeout.
-// 
-// Documentation from patch_ble_advt_restart.xap
-// ---------------------------------------------
-// 
-// Issues patched: B-223811
-// 
-// When advertisements are disabled before the expiry of the interval
-// and enabled immediately the advertisements are not sent before the
-// expiry of the advertising interval
-// 
-// Documentation from patch_whitelist_connection_status.xap
-// --------------------------------------------------------
-// 
-// Issues patched: B-180762
-// 
-// If a BlueCore device attempts but fails to form a Low Energy (LE) connection
-// to a remote slave using the whitelist, it will make no further attempts to
-// initiate a connection to that slave until either the BlueCore is reset or the
-// slave is removed and re-added to the whitelist.
-// 
-// Documentation from patch_semp2.xap
-// ----------------------------------
-// 
-// Issues patched: B-184008
-// 
-// If HCI_SET_EVENT_MASK_PAGE_2 command is sent with wrong parameters
-// to Bluecore device, it returns error code
-// 'INVALID_HCI_COMMAND_PARAMETERS'. It should return error code
-// 'UNKNOWN_HCI_COMMAND'.
-// 
-// Documentation from patch_disc_ll_pdu.xap
-// ----------------------------------------
-// 
-// Issues patched: B-179448
-// 
-// If a BlueCore device in the Connection State (regardless if in master or
-// slave role) receives an unexpected Data Channel PDU from the peer Link Layer
-// during the encryption start or encryption pause procedure, it does not exit 
-// the Connection State and does not notify the Host with error code 
-// "Connection Terminated Due to MIC Failure (0x3d)".
-// 
-// Documentation from patch_fsm_shared_patchpoint.c
-// ------------------------------------------------
-// 
-// Issues patched: B-216310
-// 
-// In a particular scenario where the peer device retries a Role Switch
-// (after a failed Role Switch) without EPR sequence, the Hydra/BlueCore 
-// Devices do not handle the user data Start/Stop operation properly. 
-// As a result the user data does not resume after the procedure is finished.
-// 
-// Version information for input files
-// -----------------------------------
-// 
-// Created by patchmaker.pl Revision: #68  Date: 2016/01/18 
-// 
-// Input file: pb-207.pb
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/pb-207.pb
-// File revision: 4
-// 
-// Input file: pb-173-common.pb
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/pb-173-common.pb
-// File revision: 7
-// 
-// Input file: report_bt4p2.pb
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/report_bt4p2.pb
-// File revision: 1
-// 
-// Input file: patch_ulp_adv_avg_to_calc.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_ulp_adv_avg_to_calc.xap
-// File revision: 4
-// 
-// Input file: ../patch_utils.inc
-// Depot file: //depot/bc/gemini-a12/dev/patches/patch_utils.inc
-// File revision: 1
-// 
-// Input file: patch_ble_scan_deaf.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_ble_scan_deaf.xap
-// File revision: 3
-// 
-// Input file: patch_usb_suspend_deep_sleep.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_usb_suspend_deep_sleep.xap
-// File revision: 3
-// 
-// Input file: patch_tx_if_reduction.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_tx_if_reduction.xap
-// File revision: 1
-// 
-// Input file: coex_shutdown.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/coex_shutdown.xap
-// File revision: 3
-// 
-// Input file: patch_access_address.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_access_address.xap
-// File revision: 2
-// 
-// Input file: patch_sched_get_or_peek_message.c
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_sched_get_or_peek_message.c
-// File revision: 3
-// 
-// Input file: patch_sched_get_or_peek_message_part2.c
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_sched_get_or_peek_message_part2.c
-// File revision: 2
-// 
-// Input file: patch_ble_advt_restart.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_ble_advt_restart.xap
-// File revision: 2
-// 
-// Input file: patch_whitelist_connection_status.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_whitelist_connection_status.xap
-// File revision: 4
-// 
-// Input file: patch_semp2.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_semp2.xap
-// File revision: 3
-// 
-// Input file: patch_disc_ll_pdu.xap
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_disc_ll_pdu.xap
-// File revision: 4
-// 
-// Input file: patch_fsm_shared_patchpoint.c
-// Depot file: //depot/bc/gemini-a12/dev/patches/10520/patch_fsm_shared_patchpoint.c
-// File revision: 3
-
-// explicit, PSKEY_HCI_LMP_LOCAL_VERSION (0x010d, 269), 1 words
-&010d = 0808
-
-// explicit, PSKEY_LMP_REMOTE_VERSION (0x010e, 270), 1 words
-&010e = 0008
-
-// patch_hardware_0, PSKEY_PATCH50 (0x212c, 8492), 56 words
-&212c = 0000 f001 0617 0513 0118 ff2b ff0e 1a00 2818 009e 081b f100 8888 24f0 f925 f821 0a17 0184 0cf0 0117 0013 0009 02a4 fb25 fa21 f915 f811 fb55 fa61 09e0 ff84 10f0 0117 0013 0009 02a4 f935 f841 f925 f821 0f1b 0712 10a4 0494 0712 e151 0722 f915 f811 0018 ff2b ff0e f000 0518 00e2 5a79
-
-// patch_hardware_1, PSKEY_PATCH51 (0x212d, 8493), 21 words
-&212d = 0002 968a 0863 f925 f821 0757 0663 e099 02ec 05e0 f915 0727 f815 0627 0218 ff2b ff0e 9700 8d18 00e2 7e34
-
-// patch_hardware_2, PSKEY_PATCH52 (0x212e, 8494), 16 words
-&212e = 0002 0b5a 0100 7834 0040 0327 0223 f815 e311 0218 ff2b ff0e 0b00 5e18 00e2 59c1
-
-// patch_hardware_3, PSKEY_PATCH53 (0x212f, 8495), 17 words
-&212f = 0000 7315 0084 04f0 0800 0014 03e0 f800 1215 0b27 0018 ff2b ff0e 7300 1818 00e2 0549
-
-// patch_hardware_4, PSKEY_PATCH54 (0x2130, 8496), 21 words
-&2130 = 0001 53f8 0817 0e27 0c00 6384 07f0 0118 ff2b ff0e 5400 0918 00e2 0917 0118 ff2b ff0e 5400 fb18 00e2 91f6
-
-// patch_hardware_5, PSKEY_PATCH55 (0x2131, 8497), 49 words
-&2131 = 0002 c0d5 0423 05f4 031b 0012 0280 1df0 021b 0916 1000 00c4 1ef0 0916 03c4 1bf4 031b 0012 0280 17f4 0380 15f4 0480 13f4 0580 11f4 0680 0ff4 0b80 0df4 0d80 0bf4 019c fb00 6719 0d9e 0218 ff2b ff0e c200 8c18 00e2 0218 ff2b ff0e c100 de18 00e2 c5cf
-
-// patch_hardware_6, PSKEY_PATCH56 (0x2132, 8498), 42 words
-&2132 = 0003 243f f40b 0827 0923 e019 0916 01b4 0926 0318 ff2b ff0e 2400 4218 00e2 fa0b 3d14 0327 0114 0227 0014 0127 0027 081b 0816 0218 ff2b ff0e f700 fd18 009e e111 081b 0816 0218 ff2b ff0e 3300 ff18 009e fa0f 40f2
-
-// patch_hardware_7, PSKEY_PATCH57 (0x2133, 8499), 23 words
-&2133 = 0003 254e 02c0 0916 1000 00c4 02f4 02b0 0916 fec4 e1b1 0922 0816 0318 ff2b ff0e 2500 5218 8000 00c0 08f2 00e2 e402
-
-// patch_hardware_8, PSKEY_PATCH58 (0x2134, 8500), 16 words
-&2134 = 0003 21ca fa0b 0227 0323 e019 0916 01b4 0926 0318 ff2b ff0e 2200 cd18 00e2 22dc
-
-// patch_hardware_9, PSKEY_PATCH59 (0x2135, 8501), 18 words
-&2135 = 0000 55e2 09f4 0218 ff2b ff0e 2c00 a718 009e 0314 fc0f 0018 ff2b ff0e 5600 0118 00e2 a008
-
-// patch_hardware_10, PSKEY_PATCH60 (0x2136, 8502), 30 words
-&2136 = 0004 0d80 1aa4 0418 ff2b ff0e 1d00 ba18 009e 0184 0d2c 0013 8f00 89d0 0117 bf00 d6d4 0318 ff2b ff0e 2700 4218 009e 0418 ff2b ff0e 0e00 8418 00e2 6855
-
-// patch_hardware_11, PSKEY_PATCH61 (0x2137, 8503), 22 words
-&2137 = 0002 4da5 0118 ff2b ff0e 6200 c518 009e 031b 2b22 fcc4 2c26 0114 e700 f025 0218 ff2b ff0e 4e00 a818 00e2 8dfc
-
-// patch_hardware_12, PSKEY_PATCH62 (0x2138, 8504), 19 words
-&2138 = 0002 0f22 0310 081b 0100 8022 0100 b012 04f4 0114 e019 0426 0218 ff2b ff0e 0f00 2618 00e2 bc41
-
-// patch_hardware_13, PSKEY_PATCH63 (0x2139, 8505), 12 words
-&2139 = 0002 0d95 0513 0100 b022 0218 ff2b ff0e 0f00 db18 00e2 7a40
-
-// patch_fsm_shared_patchpoint, PSKEY_PATCH121 (0x2209, 8713), 36 words
-&2209 = fc0b 0b13 0717 1d00 c184 1df0 081b 0016 6384 05f0 1380 17f0 0114 13e0 6084 13f0 0100 da80 0df0 0d1b 5d9a 0af4 b900 f014 0127 0214 0027 e315 0010 000e 019f 0014 0d1b 5d26 fc0f a1a6
-
-// patch_sched_get_or_peek_message, PSKEY_PATCH123 (0x220b, 8715), 49 words
-&220b = fa0b 0717 0484 2cf0 0617 0690 e119 0c00 d438 041a 001a 022b 23f4 0116 0184 20f0 0216 0327 1df4 e119 0016 0784 19f0 e500 ab15 8000 0054 0100 c018 ff2b fe27 0317 ff0e fe9f e199 0cf4 7d00 f214 0127 0014 0027 0317 000e 019f 0014 021b 0226 fa0f 8392
-
-// patch_spare1, PSKEY_PATCH155 (0x222b, 8747), 60 words
-&222b = e70b 1627 a100 8514 0227 0214 0127 6b00 d814 0427 0214 0327 0417 fe27 0317 ff27 1613 0230 0814 0027 e415 0534 ff0e fe9f 0513 0009 01a4 e015 7fc4 7f84 1bf0 0617 1584 18f0 161b 0116 010e 029f e119 049a 11f4 0116 4184 0ef0 e500 ac11 8000 0050 0100 c014 ff27 fe23 0816 ff0e fe9f 0114 02e0 0014 e70f 4d65
-
-// patch_spare2, PSKEY_PATCH156 (0x222c, 8748), 40 words
-&222c = f40b 0927 2900 d414 0427 0314 0327 3500 ea14 0627 0314 0527 2900 9614 0827 0414 0727 0917 0110 070e 089f 0917 030e 049f 0617 fe27 0517 ff27 7f14 0027 1514 0127 2a14 0227 0114 0913 ff0e fe9f f40f 3478
-&01fe = 6590
-//Interface, BCSP
-//&01f9 = 0001
-//Interface, H4
-&01f9 = 0003
-//Bit rate for 8811, 115200
-&01ea = 0001 c200

feeds/edgecore/eltt2/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eltt2
-PKG_VERSION:=1.0
-PKG_BUILD_DIR:= $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/eltt2
-	SECTION:=base
-	CATEGORY:=Utilities
-	TITLE:=eltt2
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/eltt2/install
-	$(INSTALL_DIR) $(1)/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/eltt2 $(1)/bin/
-endef
-
-define Package/eltt2/extra_provides
-    echo "libc.so.6";
-endef
-
-$(eval $(call BuildPackage,eltt2))

feeds/edgecore/eltt2/src/License.txt

@@ -1,27 +0,0 @@
-Copyright (c) 2014, Infineon Technologies AG
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

feeds/edgecore/eltt2/src/Makefile

@@ -1,15 +0,0 @@
-# Makefile for Embedded Linux TPM Toolbox 2 (ELTT2)
-# Copyright (c) Infineon Technologies AG
-
-#CROSS-COMPILE:=../../../../../qsdk/staging_dir/toolchain-arm/bin/arm-openwrt-linux-
-#CC:=$(CROSS-COMPILE)gcc
-CC = gcc
-CFLAGS=-Wall -Wextra -std=c99 -g
-
-all: eltt2
-
-eltt2: eltt2.c eltt2.h
-	$(CC) $(CFLAGS) eltt2.c -o eltt2
-
-clean:
-	rm -rf eltt2

feeds/edgecore/eltt2/src/README.md

@@ -1,230 +0,0 @@
-# ELTT2 - Infineon Embedded Linux TPM Toolbox 2 for TPM 2.0
- 
-
-All information in this document is Copyright (c) 2014-2022, Infineon Technologies AG <br>
-All rights reserved.
-
-
-# 1. Welcome
-
-Welcome to Embedded Linux TPM Toolbox 2 (ELTT2). ELTT2 is a single-file executable program intended for testing, performing diagnosis and basic state changes of the Infineon Technologies TPM 2.0.
-
-
-## 1.1 Prerequisites
-
-To build and run ELTT2 you need GCC and a Linux system capable of hosting a TPM.
-
-ELTT2 may run on many other little-endian hardware and software configurations capable of running Linux and hosting a TPM, but this has not been tested.
-
-ELTT2 does not support machines with a big-endian CPU.
-
-## 1.2 Getting Started
-
-A TPM 2.0 evaluation board can be ordered in the [Hitex Webshop](https://www.ehitex.de/evaluation-boards/infineon/2564/iridium-9670-tpm2.0-spi).
-
-
-<p align="center">
-  <img src="https://cloud.githubusercontent.com/assets/19730245/25651091/77a84744-2fe1-11e7-91bd-a2e39678202d.JPG" width="350"/>
-</p>
-
-In order to execute ELTT2, you need to compile it first:
-1. Switch to the directory with the ELTT2 source code
-2. Compile the source code by typing the following command:
-    make
-
-Due to hardware (and thus TPM) access restrictions for normal users, ELTT2 requires root (aka superuser or administrator) privileges. They can be obtained e.g. by using the 'sudo' command on Debian Linux derivates.
-
-The Infineon [TPM 2.0 Application Note](https://www.infineon.com/dgdl/Infineon-App-Note-SLx9670-TPM2.0_Embedded_RPi_DI_SLx-AN-v01_20-EN.pdf?fileId=5546d46267c74c9a01684b96e69f5d7b) shows how the TPM device driver can be set up (e.g. for Linux Kernel 4.14).
-
-
-
-# 2. Usage of ELTT2
-
-## 2.1 Generic Usage
-
-ELTT2 is operated as follows:
-
-Call: `./eltt2 <option(s)>`
-
-For example: `./eltt2 -g` or `./eltt2 -gc`
-
-For getting an overview of the possible commands, run `./eltt2 -h`
-
-Some options require the TPM to be in a specific state. This state is shown in brackets ("[]") behind each command line option in the list below:
-
-\[-\]: none <br>
-\[\*\]: the TPM platform hierarchy authorization value is not set (i.e., empty buffer) <br>
-\[l\]: the required PCR bank is allocated <br>
-\[u\]: started <br>
-
-To get the TPM into the required state, call ELTT2 with the corresponding commands ("x" for a state means that whether this state is required or not depends on the actual command or the command parameters sent eventually to the TPM).
-
- Command line option                                 | Explanation                                       | Precondition
- ---                                                 | ---                                               | ---
- `-a [hash algorithm] <data bytes>`                  | Hash Sequence SHA-1/256/384 \[default: SHA-1\]    | \[u\]
- `-A <data bytes>`                                   | Hash Sequence SHA-256                             | \[u\]
- `-b <command bytes>`                                | Enter your own TPM command                        | \[u\]
- `-c`                                                | Read Clock                                        | \[u\]
- `-d <shutdown type>`                                | Shutdown                                          | \[u\]
- `-e [hash algorithm] <PCR index> <PCR digest>`      | PCR Extend SHA-1/256/384 \[default: SHA-1\]       | \[u\], \[l\]
- `-E <PCR index> <PCR digest>`                       | PCR Extend SHA-256                                | \[u\], \[l\]
- `-g`                                                | Get fixed capability values                       | \[u\]
- `-v`                                                | Get variable capability values                    | \[u\]
- `-G <data length>`                                  | Get Random                                        | \[u\]
- `-h`                                                | Help                                              | \[-\]
- `-l <hash algorithm>`                               | PCR Allocate SHA-1/256/384                        | \[u\], \[\*\]
- `-r [hash algorithm] <PCR index>`                   | PCR Read SHA-1/256/384 \[default: SHA-1\]         | \[u\], \[l\]
- `-R <PCR index>`                                    | PCR Read SHA-256                                  | \[u\], \[l\]
- `-s [hash algorithm] <data bytes>`                  | Hash SHA-1/256/384 \[default: SHA-1\]             | \[u\]
- `-S <data bytes>`                                   | Hash SHA-256                                      | \[u\]
- `-t <test type>`                                    | Self Test                                         | \[u\]
- `-T`                                                | Get Test Result                                   | \[u\]
- `-u <startup type>`                                 | Startup                                           | \[-\]
- `-z <PCR index>`                                    | PCR Reset                                         | \[u\]
-
-
- Additional information:
-
-`-a`: <br>
-With the "-a" command you can hash given data with the SHA-1/256/384 hash algorithm. This hash sequence sends 3 commands \[start, update, complete\] to the TPM and allows to hash an arbitrary amount of data. For example, use the following command to hash the byte sequence {0x41, 0x62, 0x43, 0x64}: <br>
-`./eltt2 -a 41624364` Hash given data with SHA-1 hash algorithm. <br>
-or <br>
-`./eltt2 -a sha1 41624364` Hash given data with SHA-1 hash algorithm. <br>
-`./eltt2 -a sha256 41624364` Hash given data with SHA-256 hash algorithm. <br>
-`./eltt2 -a sha384 41624364` Hash given data with SHA-384 hash algorithm. <br>
-
-`-A`: <br>
-With the "-A" command you can hash given data with the SHA-256 hash algorithm. This hash sequence sends 3 commands \[start, update, complete\] to the TPM and allows to hash an arbitrary amount of data. For example, use the following command to hash the byte sequence {0x41, 0x62, 0x43, 0x64}: <br>
-`./eltt2 -A 41624364`
-
-`-b`: <br>
-With the "-b" command you can enter your own TPM command bytes and read the TPM response. For example, use the following command to send a TPM2_Startup with startup type CLEAR to the TPM: <br>
- `./eltt2 -b 80010000000C000001440000`
-
-`-c`: <br>
-With the "-c" command you can read the clock values of the TPM. 
-
-`-d`: <br>
-With the "-d" command you can issue a TPM shutdown. It has 2 options: <br>
-`./eltt2 -d` <br>
-or <br>
-`./eltt2 -d clear`    send a TPM2_Shutdown command with shutdown type CLEAR to the TPM. <br>
-`./eltt2 -d state`    send a TPM2_Shutdown command with shutdown type STATE to the TPM. <br>
-
- `-e`: <br>
- With the "-e" command you can extend bytes in the selected PCR with SHA-1/256/384. To do so, you have to enter the index of PCR in hexadecimal that you like to extend and the digest you want to extend the selected PCR with. Note that you can only extend PCRs with index 0 to 16 and PCR 23 and that the digest must have a length of 20/32/48 bytes (will be padded with 0 if necessary). The TPM then builds an SHA-1/256/384 hash over the PCR data in the selected PCR and the digest you provided and writes the result back to the selected PCR. For example, use the following command to extend PCR 23 (0x17) with the byte sequence {0x41, 0x62, 0x43, 0x64, 0x00, ... (will be filled with 0x00)}: <br>
-`./eltt2 -e 17 41624364` Extend bytes in PCR 23 with SHA-1. <br>
-or <br>
-`./eltt2 -e sha1 17 41624364` Extend bytes in PCR 23 with SHA-1. <br>
-`./eltt2 -e sha256 17 41624364` Extend bytes in PCR 23 with SHA-256. <br>
-`./eltt2 -e sha384 17 41624364` Extend bytes in PCR 23 with SHA-384. <br>
-
-`-E`: <br>
-With the "-E" command you can extend bytes in the selected PCR with SHA-256. To do so, you have to enter the index of PCR in hexadecimal that you like to extend and the digest you want to extend the selected PCR with. Note that you can only extend PCRs with index 0 to 16 and PCR 23 and that the digest must have a length of 32 bytes (will be padded with 0 if necessary). The TPM then builds an SHA-256 hash over the PCR data in the selected PCR and the digest you provided and writes the result back to the selected PCR. For example, use the following command to extend PCR 23 (0x17) with the byte sequence {0x41, 0x62, 0x43, 0x64, 0x00, ... (will be filled with 0x00)}: <br>
- `./eltt2 -E 17 41624364`
-
-`-g`: <br>
-With the "-g" command you can read the TPM's fixed properties.
-
-`-v`: <br>
-With the "-v" command you can read the TPM's variable properties.
-
-`-G`: <br>
-With the "-G" command you can get a given amount of random bytes. Note that you can only request a maximum amount of 32 random bytes at once. For example, use the following command to get 20 (0x14) random bytes: <br>
- `./eltt2 -G 14`
-
-`-l`: <br>
-With the "-l" command you can allocate the SHA-1/256/384 PCR bank. Take note of two things. Firstly, the command requires a platform authorization value and it is set to an empty buffer; hence the command cannot be used if the TPM platform authorization value is set (e.g., by UEFI). Secondly, when the command is executed successfully a TPM reset has to follow for it to take effect. For example, use the following command to allocate a PCR bank: <br>
-`./eltt2 -l sha1` Allocate SHA-1 PCR bank. <br>
-`./eltt2 -l sha256` Allocate SHA-256 PCR bank. <br>
-`./eltt2 -l sha384` Allocate SHA-384 PCR bank. <br>
-
-`-r`: <br>
-With the "-r" command you can read data from a selected SHA-1/256/384 PCR. For example, use the following command to read data from PCR 23 (0x17): <br>
-`./eltt2 -r 17` Read data from SHA-1 PCR 23. <br>
-or <br>
-`./eltt2 -r sha1 17` Read data from SHA-1 PCR 23. <br>
-`./eltt2 -r sha256 17` Read data from SHA-256 PCR 23. <br>
-`./eltt2 -r sha384 17` Read data from SHA-384 PCR 23. <br>
-
-`-R`: <br>
-With the "-R" command you can read data from a selected SHA-256 PCR. For example, use the following command to read data from PCR 23 (0x17): <br>
- `./eltt2 -R 17`
-
-`-s`: <br>
-With the "-s" command you can hash given data with the SHA-1/256/384 hash algorithm. This command only allows a limited amount of data to be hashed (depending on the TPM's maximum input buffer size). For example, use the following command to hash the byte sequence {0x41, 0x62, 0x43, 0x64}: <br>
-`./eltt2 -s 41624364` Hash given data with SHA-1 hash algorithm. <br>
-or <br>
-`./eltt2 -s sha1 41624364` Hash given data with SHA-1 hash algorithm. <br>
-`./eltt2 -s sha256 41624364` Hash given data with SHA-256 hash algorithm. <br>
-`./eltt2 -s sha384 41624364` Hash given data with SHA-384 hash algorithm. <br>
-
-`-S`: <br>
-With the "-S" command you can hash given data with the SHA-256 hash algorithm. This command only allows a limited amount of data to be hashed (depending on the TPM input buffer size). For example, use the following command to hash the byte sequence {0x41, 0x62, 0x43, 0x64}: <br>
- `./eltt2 -S 41624364`
-
-`-t`: <br>
-With the "-t" command you can issue a TPM selftest. It has 3 options: <br>
-`./eltt2 -t` <br>
-or<br>
-`./eltt2 -t not_full` Perform a partial TPM2_Selftest to test previously untested TPM capabilities. <br>
-`./eltt2 -t full` Perform a full TPM2_Selftest to test all TPM capabilities. <br>
-`./eltt2 -t incremental`  Perform a test of selected algorithms. 
-
-`-T`: <br>
-With the "-T" command you can read the results of a previously run selftest.
-
-`-u`: <br>
-With the "-u" command you can issue a TPM startup command. It has 2 options: <br>
-`./eltt2 -u` <br>
-or <br>
-`./eltt2 -u clear` send a TPM2_Startup with startup type CLEAR to the TPM. <br>
-`./eltt2 -u state` send a TPM2_Startup with startup type STATE to the TPM.
-
-`-z`: <br>
-With the "-z" command you can reset a selected PCR. Note that you can only reset PCRs 16 and 23. For example, use the following command to reset PCR 23 (0x17): <br>
- `./eltt2 -z 17`
-
-## 2.2 Examples:
-
-In order to work with the TPM, perform the following steps:
-- Send the TPM2_Startup command: `./eltt2 -u`
-
-
-# 3. If you have questions
-
-If you have any questions or problems, please read the section "FAQ and
-Troubleshooting" in this document.
-In case you still have questions, contact your local Infineon
-Representative.
-Further information is available at <https://www.infineon.com/tpm>.
-
-
-# 4. FAQ and Troubleshooting
-
-If you encounter any error, please make sure that
-- the TPM is properly connected.
-- the TPM driver is loaded, i.e. check that "/dev/tpm0" exists. In case of driver loading problems (e.g. shown by "Error opening device"), reboot your system and try to load the driver again.
-- ELTT2 has been started with root permissions. Please note that ELTT2 needs root permissions for all commands.
-- the TPM is started. (See section 2.2 in this document on how to do this.)
-
-
-The following list shows the most common errors and their solution:
-
-The ELTT2 response is "Error opening the device.":
-- You need to load a TPM driver before you can work with ELTT2.
-- You need to start ELTT2 with root permissions.
-
-The ELTT2 responds with error code 0x100.
-- You need to send the TPM2_Startup command, or you did send it twice. In
-  case you have not sent it yet, do so with `./eltt2 -u`.
-
-The TPM does not change any of the permanent flags shown by sending the "-g"
-command , e.g. after a force clear.
-- The TPM requires a reset in order to change any of the permanent flags.
-  Press the reset button or disconnect the TPM to do so.
-
-The value of a PCR does not change after sending PCR extend or reset.
-- With the application permissions you cannot modify every PCR. For more
-  details, please refer to the description for the different PCR commands
-  in this file.

feeds/edgecore/eltt2/src/README.txt

@@ -1,362 +0,0 @@
---------------------------------------------------------------------------------
-        Infineon Embedded Linux TPM Toolbox 2 (ELTT2) for TPM 2.0 v1.1
-                            Infineon Technologies AG
-
-All information in this document is Copyright (c) 2014, Infineon Technologies AG
-All rights reserved.
---------------------------------------------------------------------------------
-
-Contents:
-
-1.   Welcome
-1.1  Prerequisites
-1.2  Contents of the package
-1.3  Getting Started
-
-2.   Usage of Embedded Linux TPM Toolbox 2 (ELTT2)
-2.1  Generic Usage
-2.2  Examples
-
-3.   If you have questions
-
-4.   Release Info
-
-5.   FAQ
-
-================================================================================
-
-
-
-1. Welcome
-
-    Welcome to Embedded Linux TPM Toolbox 2 (ELTT2).
-    ELTT2 is a single-file executable program intended for testing, performing
-    diagnosis and basic state changes of the Infineon Technologies TPM 2.0.
-
-
-1.1 Prerequisites
-
-    To build and run ELTT2 you need GCC and a Linux system capable of hosting a
-    TPM 2.0.
-
-    Tested PC Platforms (x86):
-      - Ubuntu (R) Linux 12.04 LTS - 64 bit (modified Kernel 3.15.4)
-        with Infineon TPM 2.0 SLB9665 Firmware 5.22
-
-    Tested Embedded Platforms (ARM):
-      - Android 6.0 "Marshmallow" - 64 bit (modified Kernel 3.18.0+) on HiKey
-        with Prototype Infineon I2C TPM 2.0 for Embedded Platforms
-
-    ELTT2 may run on many other little-endian hardware and software
-    configurations capable of running Linux and hosting a TPM 2.0, but this has
-    not been tested.
-
-    ELTT2 does not support machines with a big-endian CPU.
-
-
-1.2 Contents of Package
-
-    ELTT2 consists of the following files:
-    - eltt2.c
-      Contains all method implementations of ELTT2.
-    - eltt2.h
-      Contains all constant definitions, method and command byte declarations
-      for the operation of ELTT2.
-    - License.txt
-      Contains the license agreement for ELTT2.
-    - Makefile
-      Contains the command to compile ELTT2.
-    - README.txt
-      This file.
-
-
-1.3 Getting Started
-
-    In order to execute ELTT2, you need to compile it first:
-      1. Switch to the directory with the ELTT2 source code
-      2. Compile the source code by typing the following command:
-         make
-
-    Due to hardware (and thus TPM) access restrictions for normal users, ELTT2
-    requires root (aka superuser or administrator) privileges. They can be
-    obtained e.g. by using the 'sudo' command on Debian Linux derivates.
-
-
-2. Usage of ELTT2
-
-
-2.1 Generic Usage
-
-    ELTT2 is operated as follows:
-
-    Call: ./eltt2 <option(s)>
-
-    For example: ./eltt2 -g or ./eltt2 -gc
-
-    For getting an overview of the possible commands, run ./eltt2 -h
-
-    Some options require the TPM to be in a specific state. This state is shown
-    in brackets ("[]") behind each command line option in the list below:
-
-    [-]: none 
-    [*]: the TPM platform hierarchy authorization value is not set (i.e., empty buffer)
-    [l]: the required PCR bank is allocated
-    [u]: started
-
-    To get the TPM into the required state, call ELTT2 with the corresponding
-    commands ("x" for a state means that whether this state is required or not
-    depends on the actual command or the command parameters sent eventually to
-    the TPM).
-
-
-    Command line options:                                                                          Preconditions:
-
-    -a [hash algorithm] <data bytes>: Hash Sequence SHA-1/256/384 [default: SHA-1]                 [u]
-
-    -A <data bytes>: Hash Sequence SHA-256                                                         [u]
-
-    -b <command bytes>: Enter your own TPM command                                                 [u]
-
-    -c: Read Clock                                                                                 [u]
-
-    -d <shutdown type>: Shutdown                                                                   [u]
-
-    -e [hash algorithm] <PCR index> <PCR digest>: PCR Extend SHA-1/256/384 [default: SHA-1]        [u], [l]
-
-    -E <PCR index> <PCR digest>: PCR Extend SHA-256                                                [u], [l]
-
-    -g: Get fixed capability values                                                                [u]
-
-    -v: Get variable capability values                                                             [u]
-
-    -G <data length>: Get Random                                                                   [u]
-
-    -h: Help                                                                                       [-]
-
-    -l <hash algorithm>: PCR Allocate SHA-1/256/384                                                [u], [*]
-
-    -r [hash algorithm] <PCR index>: PCR Read SHA-1/256/384 [default: SHA-1]                       [u], [l]
-
-    -R <PCR index>: PCR Read SHA-256                                                               [u], [l]
-
-    -s [hash algorithm] <data bytes>: Hash SHA-1/SHA256 [default: SHA-1]                           [u]
-
-    -S <data bytes>: Hash SHA-256                                                                  [u]
-
-    -t <test type>: Self Test                                                                      [u]
-
-    -T: Get Test Result                                                                            [u]
-
-    -u <startup type>: Startup                                                                     [-]
-
-    -z <PCR index>: PCR Reset                                                                      [u]
-
-
-    Additional information:
-
-    -a:
-    With the "-a" command you can hash given data with the SHA-1/256/384 hash
-    algorithm. This hash sequence sends 3 commands [start, update, complete]
-    to the TPM and allows to hash an arbitrary amount of data.
-    For example, use the following command to hash the byte sequence {0x41,
-    0x62, 0x43, 0x64}:
-    ./eltt2 -a 41624364           Hash given data with SHA-1 hash algorithm.
-    or
-    ./eltt2 -a sha1 41624364      Hash given data with SHA-1 hash algorithm.
-    ./eltt2 -a sha256 41624364    Hash given data with SHA-256 hash algorithm.
-
-    -A:
-    With the "-A" command you can hash given data with the SHA-256 hash
-    algorithm. This hash sequence sends 3 commands [start, update, complete] to
-    the TPM and allows to hash an arbitrary amount of data.
-    For example, use the following command to hash the byte sequence {0x41,
-    0x62, 0x43, 0x64}:
-    ./eltt2 -A 41624364
-
-    -b:
-    With the "-b" command you can enter your own TPM command bytes and read the
-    TPM response.
-    For example, use the following command to send a TPM2_Startup with startup
-    type CLEAR to the TPM:
-    ./eltt2 -b 80010000000C000001440000
-
-    -c:
-    With the "-c" command you can read the clock values of the TPM.
-
-    -d:
-    With the "-d" command you can issue a TPM shutdown. It has 2 options:
-    ./eltt2 -d
-    or
-    ./eltt2 -d clear    send a TPM2_Shutdown command with shutdown type CLEAR to
-                        the TPM.
-    ./eltt2 -d state    send a TPM2_Shutdown command with shutdown type STATE to
-                        the TPM.
-
-    -e:
-    With the "-e" command you can extend bytes in the selected PCR with SHA-1/256/384.
-    To do so, you have to enter the index of PCR in hexadecimal that you like to
-    extend and the digest you want to extend the selected PCR with. Note that
-    you can only extend PCRs with index 0 to 16 and PCR 23 and that the digest
-    must have a length of 20/32/48 bytes (will be padded with 0 if necessary).
-    The TPM then builds an SHA-1/256/384 hash over the PCR data in the selected PCR
-    and the digest you provided and writes the result back to the selected PCR.
-    For example, use the following command to extend PCR 23 (0x17) with the byte
-    sequence {0x41, 0x62, 0x43, 0x64, 0x00, ... (will be filled with 0x00)}:
-    ./eltt2 -e 17 41624364           Extend bytes in PCR 23 with SHA-1.
-    or
-    ./eltt2 -e sha1 17 41624364      Extend bytes in PCR 23 with SHA-1.
-    ./eltt2 -e sha256 17 41624364    Extend bytes in PCR 23 with SHA-256.
-
-    -E:
-    With the "-E" command you can extend bytes in the selected PCR with SHA-256.
-    To do so, you have to enter the index of PCR in hexadecimal that you like to
-    extend and the digest you want to extend the selected PCR with. Note that
-    you can only extend PCRs with index 0 to 16 and PCR 23 and that the digest
-    must have a length of 32 bytes (will be padded with 0 if necessary).
-    The TPM then builds an SHA-256 hash over the PCR data in the selected PCR
-    and the digest you provided and writes the result back to the selected PCR.
-    For example, use the following command to extend PCR 23 (0x17) with the byte
-    sequence {0x41, 0x62, 0x43, 0x64, 0x00, ... (will be filled with 0x00)}:
-    ./eltt2 -E 17 41624364
-
-    -g:
-    With the "-g" command you can read the TPM's fixed properties.
-
-    -v:
-    With the "-v" command you can read the TPM's variable properties.
-
-    -G:
-    With the "-G" command you can get a given amount of random bytes. Note that
-    you can only request a maximum amount of 32 random bytes at once.
-    For example, use the following command to get 20 (0x14) random bytes:
-    ./eltt2 -G 14
-
-    -l:
-    With the "-l" command you can allocate the SHA-1/256/384 PCR bank.
-    Take note of two things. Firstly, the command requires a platform
-    authorization value and it is set to an empty buffer; hence the command
-    cannot be used if the TPM platform authorization value is set (e.g., by UEFI).
-    Secondly, when the command is executed successfully a TPM reset has to
-    follow for it to take effect. For example, use the following command to
-    allocate a PCR bank:
-    ./eltt2 -l sha1      Allocate SHA-1 PCR bank.
-    ./eltt2 -l sha256    Allocate SHA-256 PCR bank.
-    ./eltt2 -l sha384    Allocate SHA-384 PCR bank.
-
-    -r:
-    With the "-r" command you can read data from a selected SHA-1/256/384 PCR.
-    For example, use the following command to read data from PCR 23 (0x17):
-    ./eltt2 -r 17           Read data from SHA-1 PCR 23.
-    or
-    ./eltt2 -r sha1 17      Read data from SHA-1 PCR 23.
-    ./eltt2 -r sha256 17    Read data from SHA-256 PCR 23.
-
-    -R:
-    With the "-R" command you can read data from a selected SHA-256 PCR.
-    For example, use the following command to read data from PCR 23 (0x17):
-    ./eltt2 -R 17
-
-    -s:
-    With the "-s" command you can hash given data with the SHA-1/256/384 hash
-    algorithm. This command only allows a limited amount of data to be hashed
-    (depending on the TPM's maximum input buffer size).
-    For example, use the following command to hash the byte sequence {0x41,
-    0x62, 0x43, 0x64}:
-    ./eltt2 -s 41624364         Hash given data with SHA-1 hash algorithm.
-    or
-    ./eltt2 -s sha1 41624364    Hash given data with SHA-1 hash algorithm.
-    ./eltt2 -s sha256 41624364  Hash given data with SHA-256 hash algorithm.
-
-    -S:
-    With the "-S" command you can hash given data with the SHA-256 hash
-    algorithm. This command only allows a limited amount of data to be hashed
-    (depending on the TPM input buffer size).
-    For example, use the following command to hash the byte sequence {0x41,
-    0x62, 0x43, 0x64}:
-    ./eltt2 -S 41624364
-
-    -t:
-    With the "-t" command you can issue a TPM selftest. It has 3 options:
-    ./eltt2 -t
-    or
-    ./eltt2 -t not_full     Perform a partial TPM2_Selftest to test previously
-                            untested TPM capabilities.
-    ./eltt2 -t full         Perform a full TPM2_Selftest to test all TPM
-                            capabilities.
-    ./eltt2 -t incremental  Perform a test of selected algorithms.
-
-    -T:
-    With the "-T" command you can read the results of a previously run selftest.
-
-    -u:
-    With the "-u" command you can issue a TPM startup command. It has 2 options:
-    ./eltt2 -u
-    or
-    ./eltt2 -u clear    send a TPM2_Startup with startup type CLEAR to the TPM.
-    ./eltt2 -u state    send a TPM2_Startup with startup type STATE to the TPM.
-
-    -z:
-    With the "-z" command you can reset a selected PCR. Note that you can only
-    reset PCRs 16 and 23 and that the PCR is going to be reset in both banks
-	(SHA-1 and SHA-256).
-    For example, use the following command to reset PCR 23 (0x17):
-    ./eltt2 -z 17
-
-
-2.2 Examples:
-
-    In order to work with the TPM, perform the following steps:
-    - Send the TPM2_Startup command: ./eltt2 -u
-
-
-
-3. If you have questions
-
-    If you have any questions or problems, please read the section "FAQ and
-    Troubleshooting" in this document.
-    In case you still have questions, contact your local Infineon
-    Representative.
-    Further information is available at http://www.infineon.com/tpm.
-
-
-
-4. Release Info
-
-    This is version 1.1. This version is a general release.
-
-
-
-5. FAQ and Troubleshooting
-
-    If you encounter any error, please make sure that
-    - the TPM is properly connected.
-    - the TPM driver is loaded, i.e. check that "/dev/tpm0" exists. In case of
-      driver loading problems (e.g. shown by "Error opening device"), reboot
-      your system and try to load the driver again.
-    - ELTT2 has been started with root permissions. Please note that ELTT2 needs
-      root permissions for all commands.
-    - the TPM is started. (See section 2.2 in this document on how to do this.)
-    - Trousers do not run anymore. In some cases the Kernel starts Trousers by
-      booting.
-      Shut down Trousers by entering the following command:
-      sudo pkill tcsd
-
-    The following list shows the most common errors and their solution:
-
-    The ELTT2 response is "Error opening the device.":
-    - You need to load a TPM driver before you can work with ELTT2.
-    - You need to start ELTT2 with root permissions.
-
-    The ELTT2 responds with error code 0x100.
-    - You need to send the TPM2_Startup command, or you did send it twice. In
-      case you have not sent it yet, do so with "./eltt2 -u".
-
-    The TPM does not change any of the permanent flags shown by sending the "-g"
-    command , e.g. after a force clear.
-    - The TPM requires a reset in order to change any of the permanent flags.
-      Press the reset button or disconnect the TPM to do so.
-
-    The value of a PCR does not change after sending PCR extend or reset.
-    - With the application permissions you cannot modify every PCR. For more
-      details, please refer to the description for the different PCR commands
-      in this file.

feeds/edgecore/eltt2/src/eltt2.h

@@ -1,634 +0,0 @@
-#ifndef _ELTT2_H_
-#define _ELTT2_H_
-/**
-  * @brief		Infineon Embedded Linux TPM Toolbox 2 (ELTT2) for TPM 2.0
-  * @details		eltt2.h implements all TPM byte commands and the prototype declarations for eltt2.c.
-  * @file		eltt2.h
-  * @date		2014/06/26
-  * @copyright	Copyright (c) 2014 - 2017 Infineon Technologies AG ( www.infineon.com ).\n
-  * All rights reserved.\n
-  * \n
-  * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
-  * conditions are met:\n
-  * \n
-  * 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
-  * disclaimer.\n
-  * 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
-  * disclaimer in the documentation and/or other materials provided with the distribution.\n
-  * 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products
-  * derived from this software without specific prior written permission.\n
-  * \n
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-  * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  */
-
-// this is the main page for doxygen documentation.
-/** @mainpage	Infineon Embedded Linux TPM Toolbox 2 (ELTT2) for TPM 2.0 Documentation
-  *
-  * @section	Welcome
-  * Welcome to Infineon TPM 2.0 Software-Tool "Embedded Linux TPM Toolbox 2 (ELTT2)".\n
-  * \n
-  * @section	Introduction
-  * ELTT2 is a single file-executable program
-  * intended for test, diagnosis and basic state changes of the Infineon
-  * Technologies TPM 2.0.\n
-  * \n
-  * @section	Copyright
-  * Copyright (c) 2014 - 2017 Infineon Technologies AG ( www.infineon.com ).\n
-  * All rights reserved.\n
-  * \n
-  * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
-  * conditions are met:\n
-  * \n
-  * 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
-  * disclaimer.\n
-  * 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
-  * disclaimer in the documentation and/or other materials provided with the distribution.\n
-  * 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products
-  * derived from this software without specific prior written permission.\n
-  * \n
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-  * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <unistd.h>
-#include <getopt.h>
-#include <ctype.h>
-#include <string.h>
-#include <strings.h>
-#include <inttypes.h>
-
-//-------------"Defines"-------------
-#define TPM_RESP_MAX_SIZE		4096	///< This is the maximum possible TPM response size in bytes.
-#define TPM_REQ_MAX_SIZE		1024	///< This is the maximum possible TPM request size in bytes. TBD: Find out correct value.
-#define ERR_COMMUNICATION		-1	///< Return error check for read and write to the TPM.
-#define ERR_BAD_CMD			-2	///< Error code for a bad command line argument or option.
-#define TPM_SHA1_DIGEST_SIZE		20	///< For all SHA-1 operations the digest's size is always 20 bytes.
-#define TPM_SHA256_DIGEST_SIZE		32	///< For all SHA-256 operations the digest's size is always 32 bytes.
-#define TPM_SHA384_DIGEST_SIZE		48	///< For all SHA-384 operations the digest's size is always 48 bytes.
-#define TPM_CMD_HEADER_SIZE		10	///< The size of a standard TPM command header is 10 bytes.
-#define TPM_CMD_SIZE_OFFSET		2	///< The offset of a TPM command's size value is 2 bytes.
-#define HEX_BYTE_STRING_LENGTH		2	///< A byte can be represented by two hexadecimal characters.
-#ifndef INT_MAX
-#define INT_MAX 0x7FFFFFF			///< The maximum value of a signed 32-bit integer.
-#endif
-// TPM Return codes
-#define TPM_RC_SUCCESS			0x00000000	///< The response error code for TPM_SUCCESS.
-#define TPM_RC_BAD_TAG			0x0000001E	///< The response error code for TPM_RC_BAD_TAG.
-#define TPM_RC_SIZE			0x00000095	///< The response error code for TPM_RC_SIZE.
-#define TPM_RC_INITIALIZE		0x00000100	///< The response error code for TPM_RC_INITIALIZE.
-#define TPM_RC_FAILURE			0x00000101	///< The response error code for TPM_RC_FAILURE.
-#define TPM_RC_LOCALITY			0x00000907	///< The response error code for TPM_RC_LOCALITY.
-#define FU_FIRMWARE_VALID_FLAG		4		///< If this flag is set, the firmware is valid.
-#define FU_OWNER_FLAG			1		///< If this flag is set, the owner is set.
-// print_response_buf options
-#define PRINT_RESPONSE_CLEAR			1	///< Prints response unformatted.
-#define PRINT_RESPONSE_HEADERBLOCKS		2	///< Prints response in commented blocks.
-#define PRINT_RESPONSE_HEX_BLOCK		3	///< Prints response in rows of 16 bytes and shows the line number.
-#define PRINT_RESPONSE_HASH			4	///< Prints response of Hash
-#define PRINT_RESPONSE_WITHOUT_HEADER		12	///< Prints the response buffer from byte 12.
-#define PRINT_RESPONSE_HASH_WITHOUT_HEADER	16	///< Prints the response buffer from byte 16.
-#define PRINT_RESPONSE_WITH_HEADER		0	///< Prints the response buffer from byte 0.
-#define PRINT_RESPONSE_PCR_WITHOUT_HEADER	30	///< Prints the pcr buffer from pcr_read.
-// time conversion
-#define YEAR_SECONDS			31536000	///< Number of seconds in one year
-#define DAY_SECONDS			86400		///< Number of seconds in one day
-#define HOUR_SECONDS			3600		///< Number of seconds in one hour
-#define MINUTE_SECONDS			60		///< Number of seconds in one minute
-#define MILISECOND_TO_SECOND		1000		///< Convertion from miliseconds to seconds
-// hash
-#define STD_CC_HASH_SIZE		18		///< Hash command size
-// TPM_PT constants
-#define PT_FIXED_SELECTOR		1		///< Fixed GetCapability Flags
-#define PT_VAR_SELECTOR			2		///< Variable GetCapability Flags
-
-//-------------"Macros"-------------
-// Null pointer check
-#define NULL_POINTER_CHECK(x) if (NULL == x) { ret_val = EINVAL; fprintf(stderr, "Error: Invalid argument.\n"); break; }	///< Argument NULL check.
-#define MALLOC_ERROR_CHECK(x) if (NULL == x) { ret_val = errno; fprintf(stderr, "Error (re)allocating memory.\n"); break; }	///< Malloc error check.
-#define MEMSET_FREE(x, y) if (NULL != x) { memset(x, 0, y); free(x); x = NULL; } ///< Sets memory to 0, frees memory and sets pointer to NULL.
-// Return value check
-#define RET_VAL_CHECK(x) if (EXIT_SUCCESS != x) { break; } ///< Return value check
-// Command line option parser for hash algorithm
-#define HASH_ALG_PARSER(o, c) \
-	do { \
-		if (o == option) \
-		{ \
-			if (c == argc) \
-			{ \
-				hash_algo = ALG_SHA1; \
-			} \
-			else \
-			{ \
-				if (0 == strcasecmp(optarg, "sha1")) \
-				{ \
-					hash_algo = ALG_SHA1; \
-				} \
-				else if (0 == strcasecmp(optarg, "sha256")) \
-				{ \
-					hash_algo = ALG_SHA256; \
-				} \
-				else if (0 == strcasecmp(optarg, "sha384")) \
-				{ \
-					hash_algo = ALG_SHA384; \
-				} \
-				else \
-				{ \
-					ret_val = ERR_BAD_CMD; \
-					fprintf(stderr, "Unknown option. Use '-h' for more information.\n"); \
-					break; \
-				} \
-				if (argc > optind) \
-				{ \
-					optarg = argv[optind++]; \
-				} \
-			} \
-		} \
-		else \
-		{ \
-			hash_algo = ALG_SHA256; \
-		} \
-	} while (0)
-
-//--------------"Enums"--------------
-// Hash algorithms
-typedef enum hash_algo_enum
-{
-	ALG_NULL,
-	ALG_SHA1,
-	ALG_SHA256,
-	ALG_SHA384,
-} hash_algo_enum;
-
-//-------------"Methods"-------------
-/**
-  * @brief	Convert (max.) 8 byte buffer to an unsigned 64-bit integer.
-  * @param	[in]	*input_buffer		Input buffer. Make sure that its size is at least as high as offset + length.
-  * @param	[in]	offset			Start byte for conversion.
-  * @param	[in]	length			Amount of bytes to be converted.
-  * @param	[out]	*output_value		Return the converted unsigned 64-bit integer.
-  * @param	[in]	input_buffer_size	Size of input_buffer in bytes.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer or length is greater than 8.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @date	2014/06/26
-  */
-static int buf_to_uint64(uint8_t *input_buffer, uint32_t offset, uint32_t length, uint64_t *output_value, uint32_t input_buffer_size);
-
-/**
-  * @brief	Convert a hexadecimal string representation of bytes like "0A1F" and
-		returns an array containing the actual byte values as an array (e.g. { 0x0A, 0x1F }).
-  * @param	[in]	*byte_string		Incoming bytes as string.
-  * @param	[out]	*byte_values		Byte array representation of given input string.
-  * 						Must be allocated by caller with the length given in byte_values_size.
-  * @param	[in]	byte_values_size	Size of byte_values array.
-  * @return	One of the listed return codes.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	value of errno			In case parsing error.
-  * @date	2014/06/26
-  */
-static int hexstr_to_bytearray(char *byte_string, uint8_t *byte_values, size_t byte_values_size);
-
-/**
-  * @brief	Convert a number to a byte buffer.
-  * @param	[in]	input			User input.
-  * @param	[in]	input_size		Size of input data type in bytes.
-  * @param	[out]	*output_byte		Return buffer for the converted integer.
-						Must be allocated by the caller with at least a size of 'input_size'.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @date	2014/06/26
-  */
-static int int_to_bytearray(uint64_t input, uint32_t input_size, uint8_t *output_byte);
-
-/**
-  * @brief	Create the PCR_Extend command.
-  * @param	[in]	*pcr_index_str		User input string for PCR index.
-  * @param	[in]	*pcr_digest_str		User input string of value to extend the selected PCR with.
-  * @param	[out]	*pcr_cmd_buf		Return buffer for the complete command. Must be allocated by caller.
-  * @param	[in]	*pcr_cmd_buf_size	Size of memory allocated at pcr_cmd_buf in bytes.
-  * @param	[in]	hash_algo		Set to ALG_SHA1 for extending with SHA-1,
-						ALG_SHA256 for SHA-256, and ALG_SHA384 for SHA-384.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer or an invalid option.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	ERR_BAD_CMD			In case of bad user input.
-  * @retval	hexstr_to_bytearray		All error codes from hexstr_to_bytearray.
-  * @date	2014/06/26
-  */
-static int pcr_extend(char *pcr_index_str, char *pcr_digest_str, uint8_t *pcr_cmd_buf, size_t pcr_cmd_buf_size, hash_algo_enum hash_algo);
-
-/**
-  * @brief	Create the PCR_Allocate command.
-  * @param	[out]	*pcr_cmd_buf		Return buffer for the complete command.
-  * @param	[in]	hash_algo		Set to ALG_SHA1 to allocate SHA-1,
-						ALG_SHA256 for SHA-256, and ALG_SHA384 for SHA-384.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer or an invalid option.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @date	2022/05/09
-  */
-static int pcr_allocate(uint8_t *pcr_cmd_buf, hash_algo_enum hash_algo);
-
-/**
-  * @brief	Create the PCR_Read command.
-  * @param	[in]	*pcr_index_str		User input string for PCR index.
-  * @param	[out]	*pcr_cmd_buf		Return buffer for the complete command.
-  * @param	[in]	hash_algo		Set to ALG_SHA1 for reading with SHA-1,
-						ALG_SHA256 for SHA-256, and ALG_SHA384 for SHA-384.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer or an invalid option.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	ERR_BAD_CMD			In case of bad user input.
-  * @retval	hexstr_to_bytearray		All error codes from hexstr_to_bytearray.
-  * @date	2014/06/26
-  */
-static int pcr_read(char *pcr_index_str, uint8_t *pcr_cmd_buf, hash_algo_enum hash_algo);
-
-/**
-  * @brief	Create the PCR_Reset command.
-  * @param	[in]	*pcr_index_str		User input string for PCR index.
-  * @param	[out]	*pcr_cmd_buf		Return buffer for the complete command.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	ERR_BAD_CMD			In case of bad user input.
-  * @retval	hexstr_to_bytearray		All error codes from hexstr_to_bytearray.
-  * @date	2014/06/26
-  */
-static int pcr_reset(char *pcr_index_str, uint8_t *pcr_cmd_buf);
-
-/**
-  * @brief	Print the command line usage and switches.
-  * @date	2014/06/26
-  */
-static void print_help();
-
-/**
-  * @brief	Print the response buffer in different formats.
-  * @param	[in]	*response_buf		TPM response.
-  * @param	[in]	resp_size		TPM response size.
-  * @param	[in]	offset			Starting point for printing buffer.
-  * @param	[in]	format			Select the output format.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer or an unknown output format has been transfered.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	buf_to_uint64			All error codes from buf_to_uint64.
-  * @date	2014/06/26
-  */
-static int print_response_buf(uint8_t *response_buf, size_t resp_size, uint32_t offset, int format);
-
-/**
-  * @brief	Print a TPM response.
-  * @param	[in]	*response_buf		TPM response.
-  * @param	[in]	resp_size		TPM response size.
-  * @param	[in]	option			Defines appearance of output. Can have the following values:\n
-						- PRINT_RESPONSE_CLEAR
-						- PRINT_RESPONSE_HEADERBLOCKS
-						- PRINT_RESPONSE_HEX_BLOCK
-						- PRINT_RESPONSE_WITHOUT_HEADER
-						- PRINT_RESPONSE_WITH_HEADER
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	print_response_buf		All error codes from print_response_buf.
-  * @retval	print_clock_info		All error codes from print_clock_info.
-  * @retval	print_capability_flags		All error codes from print_capability_flags.
-  * @date	2014/06/26
-  */
-static int response_print(uint8_t *response_buf, size_t resp_size, int option);
-
-/**
-  * @brief	Check a TPM response for errors.
-  * @param	[in]	*response_buf		TPM response. Must have at least a size of TPM_CMD_HEADER_SIZE bytes.
-  * @return	Returns the TPM return code extracted from the given TPM response or one of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	buf_to_uint64			All error codes from buf_to_uint64.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @date	2014/06/26
-  */
-static int return_error_handling(uint8_t *response_buf);
-
-/**
-  * @brief	Transmit TPM command to /dev/tpm0 and get the response.
-  * @param	[in]	*buf			TPM request.
-  * @param	[in]	length			TPM request length.
-  * @param	[out]	*response		TPM response.
-  * @param	[out]	*resp_length		TPM response length.
-  * @return	One of the listed return codes or the error code stored in the global errno system variable.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @date	2014/06/26
-  */
-static int tpmtool_transmit(const uint8_t *buf, ssize_t length, uint8_t *response, ssize_t *resp_length);
-
-/**
-  * @brief	Print the capability flags.
-  * @param	[in]	*response_buf		TPM response.
-  * @param	[in]	cap_selector		Type of capabilities to print.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	buf_to_uint64			All error codes from buf_to_uint64.
-  * @date	2014/06/26
-  */
-static int print_capability_flags(uint8_t *response_buf, uint8_t cap_selector);
-
-/**
-  * @brief	Print the clock info.
-  * @param	[in]	*response_buf		TPM response.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	buf_to_uint64			All error codes from buf_to_uint64.
-  * @date	2014/06/26
-  */
-static int print_clock_info(uint8_t *response_buf);
-
-/**
-  * @brief	Create the get_random command.
-  * @param	[in]	*data_length_string	User input string for random data length.
-  * @param	[out]	*response_buf		Return buffer for the complete command.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	ERR_BAD_CMD			In case of bad user input.
-  * @retval	hexstr_to_bytearray		All error codes from hexstr_to_bytearray.
-  * @date	2014/06/26
-  */
-static int get_random(char *data_length_string, uint8_t *response_buf);
-
-/**
-  * @brief	Create the simple hash command.
-  * @param	[in]	*data_string		User input string of data to be hashed.
-  * @param	[in]	hash_algo		Set to ALG_SHA1 for hashing with SHA-1,
-						ALG_SHA256 for SHA-256, and ALG_SHA384 for SHA-384.
-  * @param	[out]	*hash_cmd_buf		Return buffer for the complete command.
-  * @param	[in]	hash_cmd_buf_size	Return buffer size.
-  * @return	One of the listed return codes.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	hexstr_to_bytearray		All error codes from hexstr_to_bytearray.
-  * @retval	int_to_bytearray		All error codes from int_to_bytearray.
-  * @date	2014/06/26
-  */
-static int create_hash(char *data_string, hash_algo_enum hash_algo, uint8_t *hash_cmd_buf, uint32_t hash_cmd_buf_size);
-
-/**
-  * @brief	Create and transmit a sequence of TPM commands for hashing larger amounts of data.
-  * @param	[in]	*data_string		User input string of data to be hashed.
-  * @param	[in]	hash_algo		Set to ALG_SHA1 for hashing with SHA-1,
-						ALG_SHA256 for SHA-256, and ALG_SHA384 for SHA-384.
-  * @param	[out]	*tpm_response_buf	TPM response.
-  * @param	[out]	*tpm_response_buf_size	Size of tpm_response_buf.
-  * @return	One of the listed return codes or the error code stored in the global errno system variable.
-  * @retval	EINVAL				In case of a NULL pointer.
-  * @retval	EXIT_SUCCESS			In case of success.
-  * @retval	value of errno			In case of memory allocation error.
-  * @retval	buf_to_uint64			All error codes from buf_to_uint64.
-  * @retval	hexstr_to_bytearray		All error codes from hexstr_to_bytearray.
-  * @retval	int_to_bytearray		All error codes from int_to_bytearray.
-  * @retval	tpmtool_transmit		All error codes from tpmtool_transmit.
-  * @retval	print_response_buf		All error codes from print_response_buf
-  * @date	2014/06/26
-  */
-static int create_hash_sequence(char *data_string, hash_algo_enum hash_algo, uint8_t *tpm_response_buf, ssize_t *tpm_response_buf_size);
-
-//-------------"command bytes"-------------
-static const uint8_t tpm2_startup_clear[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0C,		// commandSize
-	0x00, 0x00, 0x01, 0x44,		// TPM_CC_Startup
-	0x00, 0x00			// TPM_SU_CLEAR
-};
-
-static const uint8_t tpm2_startup_state[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0C,		// commandSize
-	0x00, 0x00, 0x01, 0x44,		// TPM_CC_Startup
-	0x00, 0x01			// TPM_SU_STATE
-};
-
-static const uint8_t tpm_cc_shutdown_clear[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0C,		// commandSize
-	0x00, 0x00, 0x01, 0x45,		// TPM_CC_Shutdown
-	0x00, 0x00			// TPM_SU_CLEAR
-};
-
-static const uint8_t tpm_cc_shutdown_state[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0C,		// commandSize
-	0x00, 0x00, 0x01, 0x45,		// TPM_CC_Shutdown
-	0x00, 0x01			// TPM_SU_STATE
-};
-
-static const uint8_t tpm2_self_test[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0B,		// commandSize
-	0x00, 0x00, 0x01, 0x43,		// TPM_CC_SelfTest
-	0x00				// fullTest=No
-};
-
-static const uint8_t tpm2_self_test_full[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0B,		// commandSize
-	0x00, 0x00, 0x01, 0x43,		// TPM_CC_SelfTest
-	0x01				// fullTest=Yes
-};
-
-static const uint8_t tpm_cc_get_test_result[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0A,		// commandSize
-	0x00, 0x00, 0x01, 0x7C		// TPM_CC_GetTestResult
-};
-
-static const uint8_t tpm2_self_test_incremental[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x2A,		// commandSize
-	0x00, 0x00, 0x01, 0x42,		// TPM_CC_IncrementalSelfTest
-	0x00, 0x00, 0x00, 0x0E,		// Count of Algorithm
-	0x00, 0x01, 0x00, 0x04,		// Algorithm two per line
-	0x00, 0x05, 0x00, 0x06,
-	0x00, 0x08, 0x00, 0x0A,
-	0x00, 0x0B, 0x00, 0x14,
-	0x00, 0x15, 0x00, 0x16,
-	0x00, 0x17, 0x00, 0x22,
-	0x00, 0x25, 0x00, 0x43
-};
-
-static const uint8_t tpm2_getrandom[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0C,		// commandSize
-	0x00, 0x00, 0x01, 0x7B,		// TPM_CC_GetRandom
-	0x00, 0x00			// bytesRequested (will be set later)
-};
-
-static const uint8_t tpm_cc_readclock[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0A,		// commandSize
-	0x00, 0x00, 0x01, 0x81		// TPM_CC_ReadClock
-};
-
-static const uint8_t tpm2_getcapability_fixed[] ={
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x16,		// commandSize
-	0x00, 0x00, 0x01, 0x7A,		// TPM_CC_GetCapability
-	0x00, 0x00, 0x00, 0x06,		// TPM_CAP_TPM_PROPERTIES (Property Type: TPM_PT)
-	0x00, 0x00, 0x01, 0x00,		// Property: TPM_PT_FAMILY_INDICATOR: PT_GROUP * 1 + 0
-	0x00, 0x00, 0x00, 0x66		// PropertyCount 102 (from 100 - 201)
-};
-
-static const uint8_t tpm2_getcapability_var[] ={
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x16,		// commandSize
-	0x00, 0x00, 0x01, 0x7A,		// TPM_CC_GetCapability
-	0x00, 0x00, 0x00, 0x06,		// TPM_CAP_TPM_PROPERTIES (Property Type: TPM_PT)
-	0x00, 0x00, 0x02, 0x00,		// Property: TPM_PT_FAMILY_INDICATOR: PT_GROUP * 2 + 0
-	0x00, 0x00, 0x00, 0x02		// PropertyCount 02 (from 200 - 201)
-};
-
-// Hash
-static const uint8_t tpm2_hash[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0e,		// commandSize
-	0x00, 0x00, 0x01, 0x7D,		// TPM_CC_Hash
-	0x00, 0x00,			// size (will be set later)
-					// buffer (will be added later)
-	0x00, 0x00,			// hashAlg (will be added later)
-	0x00, 0x00, 0x00, 0x00		// hierarchy of the ticket (TPM_RH_NULL; will be added later)
-};
-
-// HashSequence
-static uint8_t tpm2_hash_sequence_start[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x0e,		// commandSize
-	0x00, 0x00, 0x01, 0x86,		// TPM_CC_HashSequenceStart
-	0x00, 0x00,			// authSize (NULL Password)
-					// null (indicate a NULL Password)
-	0x00, 0x00			// hashAlg (will be set later)
-};
-
-static uint8_t tpm2_sequence_update[] = {
-	0x80, 0x02,			// TPM_ST_SESSIONS
-	0x00, 0x00, 0x00, 0x00,		// commandSize (will be set later)
-	0x00, 0x00, 0x01, 0x5c,		// TPM_CC_SequenceUpdate
-	0x00, 0x00, 0x00, 0x00,		// sequenceHandle (will be set later)
-	0x00, 0x00,			// authSize (NULL Password)
-					// null (indicate a NULL Password)
-	0x00, 0x09,			// authSize (password authorization session)
-	0x40, 0x00, 0x00, 0x09,		// TPM_RS_PW (indicate a password authorization session)
-	0x00, 0x00, 0x01, 0x00, 0x00,
-	0x00, 0x00			// size (will be set later)
-					// buffer (will be added later)
-};
-
-static uint8_t tpm2_sequence_complete[] = {
-	0x80, 0x02,			// TPM_ST_SESSIONS
-	0x00, 0x00, 0x00, 0x21,		// commandSize
-	0x00, 0x00, 0x01, 0x3e,		// TPM_CC_SequenceComplete
-	0x00, 0x00, 0x00, 0x00,		// sequenceHandle (will be set later)
-	0x00, 0x00,			// authSize (NULL Password)
-					// null (indicate a NULL Password)
-	0x00, 0x09,			// authSize (password authorization session)
-	0x40, 0x00, 0x00, 0x09,		// TPM_RS_PW (indicate a password authorization session)
-	0x00, 0x00, 0x01, 0x00, 0x00,
-	0x00, 0x00,			// size (NULL buffer)
-					// null (indicate an empty buffer buffer)
-	0x40, 0x00, 0x00, 0x07		// hierarchy of the ticket (TPM_RH_NULL)
-};
-
-static const uint8_t sha1_alg[] = {
-	0x00, 0x04			// command for sha1 alg
-};
-
-static const uint8_t sha256_alg[] = {
-	0x00, 0x0B			// command for sha256 alg
-};
-
-static const uint8_t sha384_alg[] = {
-	0x00, 0x0C			// command for sha384 alg
-};
-
-static const uint8_t tpm_cc_hash_hierarchy[] = {
-	0x40, 0x00, 0x00, 0x07		// hierarchy of the ticket (TPM_RH_NULL)
-};
-
-//PCR_Command
-static const uint8_t tpm2_pcr_allocate[] = {
-	0x80, 0x02,			// TPM_ST_SESSIONS
-	0x00, 0x00, 0x00, 0x31,		// commandSize
-	0x00, 0x00, 0x01, 0x2B,		// TPM_CC_PCR_Allocate
-	0x40, 0x00, 0x00, 0x0C,		// TPM_RH_PLATFORM
-	0x00, 0x00,			// authSize (NULL Password)
-					// null (indicate a NULL Password)
-	0x00, 0x09,			// authSize (password authorization session)
-	0x40, 0x00, 0x00, 0x09,		// TPM_RS_PW (indicate a password authorization session)
-	0x00, 0x00, 0x01, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x03,		// count (TPML_PCR_SELECTION)
-	0x00, 0x04,			// hash (TPMS_PCR_SELECTION; SHA-1)
-	0x03,				// sizeofSelect (TPMS_PCR_SELECTION)
-	0x00, 0x00, 0x00,		// pcrSelect (TPMS_PCR_SELECTION; will be set later)
-	0x00, 0x0B,			// hash (TPMS_PCR_SELECTION; SHA-256)
-	0x03,				// sizeofSelect (TPMS_PCR_SELECTION)
-	0x00, 0x00, 0x00,		// pcrSelect (TPMS_PCR_SELECTION; will be set later)
-	0x00, 0x0C,			// hash (TPMS_PCR_SELECTION; SHA-384)
-	0x03,				// sizeofSelect (TPMS_PCR_SELECTION)
-	0x00, 0x00, 0x00		// pcrSelect (TPMS_PCR_SELECTION; will be set later)
-};
-
-static const uint8_t tpm2_pcr_read[] = {
-	0x80, 0x01,			// TPM_ST_NO_SESSIONS
-	0x00, 0x00, 0x00, 0x14,		// commandSize
-	0x00, 0x00, 0x01, 0x7E,		// TPM_CC_PCR_Read
-	0x00, 0x00, 0x00, 0x01,		// count (TPML_PCR_SELECTION)
-	0x00, 0x00,			// hash (TPMS_PCR_SELECTION; will be set later)
-	0x03,				// sizeofSelect (TPMS_PCR_SELECTION)
-	0x00, 0x00, 0x00		// pcrSelect (TPMS_PCR_SELECTION)
-};
-
-static const uint8_t tpm2_pcr_extend[] = {
-	0x80, 0x02,			// TPM_ST_SESSIONS
-	0x00, 0x00, 0x00, 0x00,		// commandSize (will be set later)
-	0x00, 0x00, 0x01, 0x82,		// TPM_CC_PCR_Extend
-	0x00, 0x00, 0x00, 0x00,		// {PCR_FIRST:PCR_LAST} (TPMI_DH_PCR)
-	0x00, 0x00,			// authSize (NULL Password)
-					// null (indicate a NULL Password)
-	0x00, 0x09,			// authSize (password authorization session)
-	0x40, 0x00, 0x00, 0x09,		// TPM_RS_PW (indicate a password authorization session)
-	0x00, 0x00, 0x01, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x01,		// count (TPML_DIGEST_VALUES)
-	0x00, 0x00			// hashAlg (TPMT_HA; will be set later)
-					// digest (TPMT_HA; will be added later)
-};
-
-static const uint8_t tpm2_pcr_reset[] = {
-	0x80, 0x02,			// TPM_ST_SESSIONS
-	0x00, 0x00, 0x00, 0x1B,		// commandSize
-	0x00, 0x00, 0x01, 0x3D,		// TPM_CC_PCR_Reset
-	0x00, 0x00, 0x00, 0x00,		// {PCR_FIRST:PCR_LAST} (TPMI_DH_PCR)
-	0x00, 0x00,			// authSize (NULL Password)
-					// null (indicate a NULL Password)
-	0x00, 0x09,			// authSize (password authorization session)
-	0x40, 0x00, 0x00, 0x09,		// TPM_RS_PW (indicate a password authorization session)
-	0x00, 0x00, 0x01, 0x00, 0x00
-};
-
-#endif /* _ELTT2_H_ */

feeds/facebook/fbwifi/Makefile

@@ -0,0 +1,56 @@
+# Copyright (c) Facebook, Inc. and its affiliates.
+# All rights reserved.
+#
+# This source code is licensed under the license found in the
+# LICENSE file in the root directory of this source tree.
+#
+
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fbwifi
+PKG_VERSION:=2
+PKG_RELEASE:=0
+PKG_LICENSE:=GPL-2.0
+
+PKG_MAINTAINER:=Simon Kinane <skinane@fb.com>
+
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fbwifi
+  SUBMENU:=Captive Portals
+  SECTION:=net
+  CATEGORY:=Network
+  DEPENDS:=+iptables +luasec +luasocket \
+	+luci-base +libuci-lua +luaposix \
+	+luci-mod-network +luci-mod-status +luci-theme-bootstrap \
+	+lua-cjson +uhttpd
+  TITLE:=Facebook Wi-Fi
+  PKGARCH:=all
+endef
+
+define Package/fbwifi/description
+  Facebook Wi-Fi, an AP authorisation solution
+endef
+
+define Package/fbwifi/conffiles
+/etc/config/fbwifi
+endef
+
+define Build/Prepare
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Package/fbwifi/install
+	$(INSTALL_DIR) $(1)
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,fbwifi))

feeds/facebook/fbwifi/README.md

@@ -0,0 +1,55 @@
+# Facebook Wi-Fi v2.0 Reference Implementation for OpenWrt 
+
+## Getting started
+
+Case studies for OEM customers are available at the official page of [Facebook Wi-Fi](https://www.facebook.com/facebook-wifi).
+
+For OEM engineers, start by reading the init script in [files/etc/init.d/fbwifi](https://github.com/facebookincubator/fbc_owrt_feed/blob/master/fbwifi/files/etc/init.d/fbwifi)
+
+## Contents
+
+The 'files' subdirectory contains all the configuration, script and code 
+that implements the Facebook Wi-Fi v2.0 standard for OpenWrt.
+
+The folder structure follows *nix conventions :
+- 'etc' is the boot time scripts and configuration
+- 'usr' contains procedural scripts, lua common code module and GUI prototype for luci
+- 'www' contains the HTTP endpoints as CGI handlers 
+
+```
+files/
+├── etc
+│   ├── config
+│   │   └── fbwifi
+│   ├── hotplug.d
+│   │   └── iface
+│   │       └── 50-fbwifi
+│   ├── init.d
+│   │   └── fbwifi
+├── usr
+│   ├── lib
+│   │   └── lua
+│   │       ├── fbwifi.lua
+│   │       └── luci
+│   │           ├── controller
+│   │           │   └── fbwifi.lua
+│   │           └── view
+│   │               └── fbwifi.htm
+│   ├── sbin
+│   │   ├── fbwifi
+│   │   ├── fbwifi_debug_dump
+│   │   ├── fbwifi_gateway_info_update
+│   │   ├── fbwifi_get_config
+│   │   └── fbwifi_validate_token_db
+│   └── share
+│       └── fbwifi
+│           ├── firewall.include
+│           └── uhttpd.json
+└── www
+    └── cgi-bin
+        └── fbwifi
+            └── v2.0
+                ├── auth
+                ├── capport
+                └── info
+```

feeds/facebook/fbwifi/files/etc/config/fbwifi

@@ -0,0 +1,6 @@
+config fbwifi 'main'
+	option enabled '0'
+	option gateway_token 'FBWIFI:GATEWAY|123456789|0123456789|abcdeABCDE123456789'
+	option http_port '2060'
+	option https_port '2061'
+	option zone 'lan'

feeds/facebook/fbwifi/files/etc/hotplug.d/iface/50-fbwifi

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+[ "$ACTION" = ifup ] || exit 0
+
+/etc/init.d/fbwifi enabled || exit 0
+
+ip route get fibmatch 1.1.1.1 | grep -q "$DEVICE" || exit 0
+
+logger -t fbwifi "Reloading fbwifi due to $ACTION of $INTERFACE ($DEVICE)"
+/etc/init.d/fbwifi restart

feeds/facebook/fbwifi/files/etc/init.d/fbwifi

@@ -0,0 +1,43 @@
+#!/bin/sh /etc/rc.common
+
+START=90
+
+USE_PROCD=1
+
+reload_service() {
+	restart
+}
+
+service_triggers() {
+	procd_add_reload_trigger fbwifi
+}
+
+start_service() {
+
+	config_load fbwifi
+	config_get_bool enabled 'main' 'enabled' '0'
+	[ "$enabled" -eq 0 ] && return
+
+	config_get http_port main http_port
+	[ -z "$http_port" ] && {
+		logger -t fbwifi "required option http_port not set"
+		exit 1
+	}
+
+	config_get https_port main https_port
+	[ -z "$https_port" ] && {
+		logger -t fbwifi "required option https_port not set"
+		exit 1
+	}
+
+	logger "[fbwifi] Enabled; starting"
+
+	mkdir -p /tmp/fbwifi
+
+	/usr/sbin/fbwifi reload
+
+	procd_open_instance
+	procd_set_param command /usr/sbin/fbwifi_validate_token_db
+	procd_set_param respawn 1 300 0
+	procd_close_instance
+}