Merge pull request #581 from Telecominfraproject/main

Merge the latest changes from main

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf186w', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101_6e', 'edgecore_oap101e', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186w', 'cig_wf188n-ca', 'cig_wf188n-ca-ath12', 'cig_wf188n-us', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap102-ath12', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101-6e', 'edgecore_oap101e', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
 
     steps:
     - uses: actions/checkout@v3

.github/workflows/x64_vm-build-test.yml

@@ -29,7 +29,7 @@ jobs:
       run: |
         git config --global user.email "you@example.com"
         git config --global user.name "Your Name"
-        make -j TARGET=${{ matrix.target }}
+        make -j TARGET=${{ matrix.target }}        make -j TARGET=${{ matrix.target }}
 
     - name: Package and upload image for ${{ matrix.target }}
       id: package_and_upload_image

feeds/ipq807x/ipq807x/Makefile

@@ -18,7 +18,7 @@ DEFAULT_PACKAGES += kmod-qca-nss-dp kmod-qca-ssdk swconfig \
 	kmod-usb-phy-ipq807x kmod-usb-dwc3-of-simple \
 	kmod-ath11k-ahb kmod-qrtr_mproc wpad \
 	kmod-gpio-button-hotplug kmod-bootconfig \
-	qca-thermald-10.4 qca-ssdk-shell kmod-qca-nss-drv-bridge-mgr \
+	qca-thermald-10.4 qca-ssdk-shell \
 	uboot-envtools
 
 $(eval $(call BuildTarget))

feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds

@@ -43,6 +43,9 @@ hfcl,ion4xi|\
 hfcl,ion4xi_wp|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\
+hfcl,ion4xi_w|\
+hfcl,ion4x_w|\
+hfcl,ion4xi_HMR|\
 hfcl,ion4xe)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -36,6 +36,7 @@ qcom_setup_interfaces()
 	indio,um-310ax-v1|\
 	indio,um-510axp-v1|\
 	indio,um-510axm-v1|\
+	qcom,ipq5018-mp03.1|\
 	qcom,ipq5018-mp03.3|\
 	yuncore,ax840|\
 	motorola,q14|\
@@ -63,8 +64,11 @@ qcom_setup_interfaces()
 		ucidef_set_interface_wan "eth0"		
 		;;
        cig,wf186w)
-		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "3:lan" "0:lan" "6@eth0"
+		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6@eth0"
 		;;
+       cig,wf186h)
+                ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6@eth0"
+                ;;
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -73,6 +77,14 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"
 		;;
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w)
+                ucidef_set_interface_wan "eth0"
+                ;;
+	hfcl,ion4xi_HMR)
+		ucidef_set_interface_lan "eth1"
+		ucidef_set_interface_wan "eth0"
+		;;
 	qcom,ipq807x-hk14)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"
@@ -84,7 +96,15 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1 eth2 eth3 eth4"
 		ucidef_set_interface_wan "eth0"
 		;;
-	cybertan,eww622-a1|\
+	cybertan,eww622-a1)
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch1" \
+			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;	
+	xunison,d50-5g)
+                ucidef_set_interface_wan "eth0"
+                ucidef_set_interface_lan "eth1"
+                ;;	
 	qcom,ipq5018-mp03.1)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -92,11 +112,17 @@ qcom_setup_interfaces()
 		ucidef_add_switch_attr "switch1" "enable" "false"
 		ucidef_add_switch_attr "switch1" "reset" "true"
 		;;
+	qcom,ipq5018-mp03.3)
+		ucidef_set_interface_lan "eth1"
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch1"
+		ucidef_add_switch_attr "switch1" "enable" "false"
+		ucidef_add_switch_attr "switch1" "reset" "true"
+		;;	
 	edgecore,eap104)
-		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch1" \
-			"6@eth1" "1:lan1" "2:lan2" "3:lan3" "4:lan4"
+			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
 	cybertan,eww631-a1)
 		ucidef_set_interface_wan "eth0"
@@ -112,6 +138,12 @@ qcom_setup_interfaces()
 		ucidef_add_switch_attr "switch1" "enable" "false"
 		ucidef_add_switch_attr "switch1" "reset" "true"
 		;;
+	wallys,dr5018)
+                ucidef_set_interface_lan "eth0 eth1"
+                ucidef_add_switch "switch1"
+                ucidef_add_switch_attr "switch1" "enable" "false"
+                ucidef_add_switch_attr "switch1" "reset" "true"
+                ;;
 	yuncore,fap655)
 		ucidef_add_switch "switch1" \
 			"6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
@@ -124,7 +156,6 @@ qcom_setup_macs()
 	local board="$1"
 
 	case $board in
-	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
@@ -152,6 +183,15 @@ qcom_setup_macs()
 	       # ip link set eth1 address $wan_mac
 	       # ucidef_set_label_macaddr $wan_mac		
 		;;
+        cig,wf186h)
+                mtd=$(find_mtd_chardev "0:APPSBLENV")
+                [ -z "$mtd" ] && return;
+                mac=$(grep BaseMacAddress= $mtd | cut -dx -f2)
+                [ -z "$mac" ] && return;
+                wan_mac=$(macaddr_canonicalize $mac)
+                ucidef_set_network_device_mac eth0 $wan_mac
+                ip link set eth0 address $wan_mac
+                ;;
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1)
 		mac=$(grep -i -m 1 BaseMacAddress= /dev/`cat /proc/mtd | grep APPSBLENV | cut -d: -f1` | cut -d= -f2)
@@ -160,6 +200,7 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	cig,wf188n|\
 	cig,wf196)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
 		[ -z "$mtd" ] && return;
@@ -174,9 +215,10 @@ qcom_setup_macs()
 		ucidef_set_label_macaddr $wan_mac
 		;;
 	cig,wf660a)
-		mmc_dev=$(echo $(find_mmc_part "0:APPSBLENV") | sed 's/^.\{5\}//')
-		[ -z mmc_dev ] && return
-		mac=$(grep BaseMacAddress= /dev/$mmc_dev | cut -dx -f2)
+		mmc_dev=$(find_mtd_chardev "0:APPSBLENV")
+		[ -z "$mmc_dev" ] && mmc_dev=$(find_mmc_part "0:APPSBLENV")
+		[ -z "$mmc_dev" ] && return
+		mac=$(grep BaseMacAddress= $mmc_dev | cut -dx -f2)
 		[ -z "$mac" ] && return;
 		wan_mac=$(macaddr_canonicalize $mac)
 		ucidef_set_network_device_mac eth0 $wan_mac
@@ -218,6 +260,13 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
+	wallys,dr5018)
+		mac=$(grep -i -m 1 BaseMacAddress= /dev/`cat /proc/mtd | grep APPSBLENV | cut -d: -f1` | cut -d= -f2)
+		[ -z "$mac"] && mac="00:11:22:33:44:00"
+		wan_mac=$(macaddr_canonicalize $mac)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_label_macaddr $wan_mac
+		;;
 	esac
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
 	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -40,9 +40,10 @@ ath11k_generate_macs_wf194() {
 }
 
 ath11k_generate_macs_ion4x() {				     
+	local dev=$(find_mtd_chardev "0:ART")
 	touch /lib/firmware/ath11k-macs			   
-	wifimac0=$(grep WLAN0_BASEMAC= /dev/mtd15 |cut -d '=' -f2) 
-	wifimac1=$(grep WLAN1_BASEMAC= /dev/mtd15 |cut -d '=' -f2) 
+	wifimac0=$(grep WLAN0_BASEMAC= $dev |cut -d '=' -f2) 
+	wifimac1=$(grep WLAN1_BASEMAC= $dev |cut -d '=' -f2) 
 	wifimac2=00:00:00:00:00:00				 
 	echo -ne \\x${wifimac0//:/\\x} >> /lib/firmware/ath11k-macs
 	echo -ne \\x${wifimac1//:/\\x} >> /lib/firmware/ath11k-macs
@@ -60,8 +61,9 @@ ath11k_generate_macs_pax1800() {
 
 ath11k_generate_macs_wf660a() {
 	touch /lib/firmware/ath11k-macs
-	mmc_dev=$(find_mmc_part 0:APPSBLENV)
-	[ -n $mmc_dev ] && mac=$(grep BaseMacAddress= $mmc_dev | cut -dx -f2)
+	mmc_dev=$(find_mtd_chardev "0:APPSBLENV")
+	[ -z "$mmc_dev" ] && mmc_dev=$(find_mmc_part "0:APPSBLENV")
+	[ -n "$mmc_dev" ] && mac=$(grep BaseMacAddress= $mmc_dev | cut -dx -f2)
 	eth=$(macaddr_canonicalize $mac)
 	mac1=$(macaddr_add $eth 1)
 	mac2=$(macaddr_add $eth 2)
@@ -84,6 +86,19 @@ ath11k_generate_macs_wf186w() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_wf186h() {
+        touch /lib/firmware/ath11k-macs
+        local dev=$(find_mtd_chardev "0:APPSBLENV")
+        mac=$(grep BaseMacAddress= $dev | cut -dx -f2)
+        eth=$(macaddr_canonicalize $mac)
+        mac1=$(macaddr_add $eth 2)
+        mac2=$(macaddr_add $eth 3)
+        mac3=$(macaddr_add $eth 4)
+        echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+        echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+        echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 
 caldata_die() {
 	echo "caldata: " "$*"
@@ -158,14 +173,20 @@ case "$FIRMWARE" in
 ath11k/IPQ5018/hw1.0/caldata.bin)
 	case "$board" in
 	cig,wf186w|\
+	cig,wf186h|\
 	cybertan,eww622-a1|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
+	wallys,dr5018|\
 	edgecore,eap104|\
 	yuncore,fap655|\
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w|\
+	hfcl,ion4xi_HMR|\
 	liteon,wpx8324|\
 	motorola,q14|\
 	muxi,ap3220l|\
+	xunison,d50-5g|\
 	qcom,ipq5018-mp03.1)
 		caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -174,6 +195,11 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 ath11k/qcn6122/hw1.0/caldata_1.bin)
 	case "$board" in
 	cig,wf186w|\
+	cig,wf186h|\
+	wallys,dr5018|\
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w|\
+	hfcl,ion4xi_HMR|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	yuncore,fap655|\
@@ -185,6 +211,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
 	motorola,q14|\
+	wallys,dr5018|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -201,6 +228,7 @@ ath11k/QCN9074/hw1.0/caldata_1.bin)
 	cig,wf196|\
 	wallys,dr6018-v4|\
 	cybertan,eww622-a1|\
+	xunison,d50-5g|\
 	qcom,ipq5018-mp03.1|\
 	qcom,ipq807x-hk14)
 		caldata_extract "0:ART" 0x26800 0x20000
@@ -218,6 +246,9 @@ ath11k/QCN9074/hw1.0/caldata_2.bin)
 ath11k-macs)
 	case "$board" in
 	hfcl,ion4xi|\
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w|\
+	hfcl,ion4xi_HMR|\
 	hfcl,ion4xi_wp|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -235,6 +266,7 @@ ath11k-macs)
 	indio,um-310ax-v1|\
 	indio,um-510axp-v1|\
 	indio,um-510axm-v1|\
+	xunison,d50-5g|\
 	cig,wf188n)
 		ath11k_generate_macs
 		;;
@@ -253,6 +285,9 @@ ath11k-macs)
 	cig,wf186w)
 		ath11k_generate_macs_wf186w
 		;;
+	cig,wf186h)
+		ath11k_generate_macs_wf186h
+		;;
 	esac
 	;;
 *)

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/net/50-dvlan

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+debug() {
+	logger -t HOTPLUG-DVLAN "$*"
+}
+
+if [ "${INTERFACE:0:4}" != "wlan" ]; then
+	exit 0
+fi
+
+case "$(board_name)" in
+	"cig,wf186w")
+		wan_iface="eth0"
+		switch_dev="switch0"
+		switch_wan_port=4
+		switch_cpu_port=6
+		;;
+
+	*)
+		exit 0
+esac
+
+VSTR="$(echo $INTERFACE | egrep -o 'v([0-9]+)$')"
+[ -z "$VSTR" ] && exit 0
+VID="${VSTR:1}"
+[ $VID -lt 1 -o $VID -gt 4096 ] && exit 0
+
+if [ "$ACTION" = "add" ]; then
+	debug "[$INTERFACE] Dynamic VLAN $VID added, configuring switch"
+	swconfig dev ${switch_dev} vlan $VID set ports "${switch_wan_port}t ${switch_cpu_port}t"
+elif [ "$ACTION" = "remove" ]; then
+	let cnt="$(bridge vlan show vid $VID | egrep "^wlan" | wc -l)"
+	debug "[$INTERFACE] Dynamic VLAN interface removed, references left = $cnt"
+	if [ $cnt -eq 0 ]; then
+		debug "[$INTERFACE] No more references, removing $VID from switch"
+		swconfig dev ${switch_dev} vlan $VID set ports ""
+	fi
+fi

feeds/ipq807x/ipq807x/base-files/etc/init.d/bootcount

@@ -7,6 +7,9 @@ boot() {
 	hfcl,ion4xe|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w|\
+	hfcl,ion4xi_HMR|\
 	hfcl,ion4xi_wp|\
 	hfcl,ion4xi)
 		fw_setenv boot_count 0

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -52,7 +52,7 @@ do_flash_emmc() {
 	tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
 }
 
-emmc_do_upgrade_bootconfig() {
+spi_nor_emmc_do_upgrade_bootconfig() {
 	local tar_file="$1"
 
 	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
@@ -84,11 +84,17 @@ emmc_do_upgrade_bootconfig() {
 	fi
 
 	for part in "0:BOOTCONFIG" "0:BOOTCONFIG1"; do
-		local emmcblock=$(find_mmc_part $part)
-		echo erase ${emmcblock}
-		dd if=/dev/zero of=${emmcblock} 2> /dev/null
-		echo update $emmcblock
-		dd if=/tmp/bootconfig of=${emmcblock} 2> /dev/null
+               local mtdchar=$(echo $(find_mtd_chardev $part) | sed 's/^.\{5\}//')
+               if [ -n "$mtdchar" ]; then
+                       echo start to update $mtdchar
+                       mtd -qq write /proc/boot_info/getbinary_bootconfig "/dev/${mtdchar}" 2>/dev/null && echo update mtd $mtdchar
+               else
+                       emmcblock=$(find_mmc_part $part)
+                       echo erase ${emmcblock}
+                       dd if=/dev/zero of=${emmcblock} 2> /dev/null
+                       echo update $emmcblock
+                       dd if=/tmp/bootconfig of=${emmcblock} 2> /dev/null
+               fi
 	done
 }
 
@@ -111,6 +117,7 @@ platform_check_image() {
 	board=$(board_name)
 	case $board in
 	cig,wf186w|\
+	cig,wf186h|\
 	cig,wf188|\
 	cig,wf660a|\
 	cig,wf188n|\
@@ -125,6 +132,7 @@ platform_check_image() {
 	indio,um-310ax-v1|\
 	indio,um-510axp-v1|\
 	indio,um-510axm-v1|\
+	wallys,dr5018|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
@@ -133,6 +141,9 @@ platform_check_image() {
 	liteon,wpx8324|\
 	edgecore,eap106|\
 	hfcl,ion4xi|\
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w|\
+	hfcl,ion4xi_HMR|\
 	hfcl,ion4xi_wp|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -150,6 +161,8 @@ platform_check_image() {
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
+	xunison,d50|\
+	xunison,d50-5g|\
 	qcom,ipq5018-mp03.3)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -168,12 +181,11 @@ platform_do_upgrade() {
 		qca_do_upgrade $1
 		;;
 	cig,wf660a)
-		emmc_do_upgrade_bootconfig $1
+		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
 	motorola,q14)
 		emmc_do_upgrade $1
 		;;
-	cig,wf186w|\
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
@@ -189,7 +201,10 @@ platform_do_upgrade() {
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
+	xunison,d50|\
+	xunison,d50-5g|\
 	qcom,ipq5018-mp03.3|\
+	wallys,dr5018|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	yuncore,fap650|\
@@ -212,17 +227,18 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
+	hfcl,ion4xi_w|\
+	hfcl,ion4x_w|\
+	hfcl,ion4xi_HMR|\
 	hfcl,ion4xi_wp)
 		wp_part=$(fw_printenv primary | cut  -d = -f2)
 		echo "Current Primary is $wp_part"
 		if [[ $wp_part == 1 ]]; then
 			CI_UBIPART="rootfs"
-			echo "Setting Primary 0 and Flashing"
-			fw_setenv primary 0 || exit 1
+			CI_FWSETENV="primary 0"
 		else
 			CI_UBIPART="rootfs_1"
-			echo "Setting Primary 1 and Flashing"
-			fw_setenv primary 1 || exit 1
+			CI_FWSETENV="primary 1"
 		fi
 		nand_upgrade_tar "$1"
 		;;
@@ -244,10 +260,10 @@ platform_do_upgrade() {
 				fw_setenv upgrade_available 0 || exit 1
 			elif grep -q rootfs1 /proc/cmdline; then
 				CI_UBIPART="rootfs2"
-				fw_setenv active 2 || exit 1
+				CI_FWSETENV="active 2"
 			else
 				CI_UBIPART="rootfs1"
-				fw_setenv active 1 || exit 1
+				CI_FWSETENV="active 1"
 			fi
 		fi
 		nand_upgrade_tar "$1"
@@ -257,6 +273,8 @@ platform_do_upgrade() {
 		PART_NAME="inactive"
 		platform_do_upgrade_dualboot_datachk "$1"
 		;;
+	cig,wf186w|\
+	cig,wf186h|\
 	yuncore,ax840|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-cig-wf186h.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-cig-wf186h.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-hfcl-ion4x_w.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-hfcl-ion4x_w.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-hfcl-ion4xi_HMR.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-hfcl-ion4xi_HMR.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-hfcl-ion4xi_w.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-hfcl-ion4xi_w.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-wallys-dr5018.dts

@@ -0,0 +1,10 @@
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts"
+
+/ {
+	model = "Wallys DR5018";
+	compatible = "wallys,dr5018", "qcom,ipq5018";
+
+	pmuv8: pmu {
+	compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50-5g.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50-5g.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-xunison-d50.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-cig-wf186h.dts

@@ -0,0 +1,965 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "CIG wf186h";
+	compatible = "cig,wf186h","qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*            256 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          8MB            |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x40800000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          16MB           |
+	 * |  code/ |              |                         |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |IPQ5018 |  0x4C000000  |          13MB           |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4CD00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4CE00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |QCN6122 |  0x4CF00000  |          15MB           |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4DE00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4DF00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4E000000  |          17MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4F100000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x3000000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01000000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4c000000 {
+			no-map;
+			reg = <0x0 0x4c000000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4CD00000 {
+			no-map;
+			reg = <0x0 0x4CD00000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4CE00000 {
+			no-map;
+			reg = <0x0 0x4CE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4CF00000 {
+			no-map;
+			reg = <0x0 0x4CF00000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4DE00000 {
+			no-map;
+			reg = <0x0 0x4DE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4DF00000 {
+			no-map;
+			reg = <0x0 0x4DF00000 0x0 0x100000>;
+		};
+
+		q6_qcn9000_region: qcn9000_pcie0@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x01100000>;
+		};
+
+		mhi_region1: dma_pool1@4F100000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4F100000 0x0 0x01000000>;
+		};
+	#elif __IPQ_MEM_PROFILE_512_MB__
+	/*                      512 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          16MB           |
+	 * |  code/ |              |                         |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |IPQ5018 |  0x4C000000  |          14MB           |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4CE00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4CF00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4D000000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |QCN6122 |  0x4D200000  |          16MB           |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4E200000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4E300000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4E400000  |           5MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4E900000  |          30MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x50700000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x3900000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01000000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C000000 {
+			no-map;
+			reg = <0x0 0x4C000000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4CE00000 {
+			no-map;
+			reg = <0x0 0x4CE00000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4CF00000 {
+			no-map;
+			reg = <0x0 0x4CF00000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D000000 {
+			no-map;
+			reg = <0x0 0x4D000000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+
+		q6_qcn9000_region: qcn9000_pcie0@4E900000 {
+			no-map;
+			reg = <0x0 0x4E900000 0x0 0x01E00000>;
+		};
+
+		mhi_region1: dma_pool1@50700000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x50700000 0x0 0x01000000>;
+		};
+	#else
+	/*                      1G Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          16MB           |
+	 * |  code/ |              |                         |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |IPQ5018 |  0x4C000000  |          14MB           |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4CE00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4CF00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4D000000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |QCN6122 |  0x4D200000  |          16MB           |
+	 * |  data  |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4E200000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4E300000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4E400000  |           5MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4E900000  |          45MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x51600000  |          24MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x3900000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01000000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C000000 {
+			no-map;
+			reg = <0x0 0x4C000000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4CE00000 {
+			no-map;
+			reg = <0x0 0x4CE00000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4CF00000 {
+			no-map;
+			reg = <0x0 0x4CF00000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D000000 {
+			no-map;
+			reg = <0x0 0x4D000000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+
+		q6_qcn9000_region: qcn9000_pcie0@4E900000 {
+			no-map;
+			reg = <0x0 0x4E900000 0x0 0x02D00000>;
+		};
+
+		mhi_region1: dma_pool1@51600000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x51600000 0x0 0x01800000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 35 0>;
+			cig_clk_div = <0xff>;
+			ethernet-phy@0 {
+				reg = <0x1d>;
+			};
+		};
+
+		realtek@29{
+			compatible = "realtek,rtl8367s";
+			mii-bus = <&mdio1>;
+			realtek,extif0 = <0 0 10 1 1 1 1 1 2>;
+			switch = <&tlmm 35 0>;
+			phy-addr = <29>;
+                        status = "ok";
+		};
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+               dp1 {
+                        device_type = "network";
+                        compatible = "qcom,nss-dp";
+                        clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+                        clock-names = "nss-snoc-gmac-axi-clk";
+                        qcom,id = <2>;
+                        reg = <0x39D00000 0x10000>;
+                        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+                        qcom,mactype = <2>;
+                        local-mac-address = [000000000000];
+                        phy-mode = "sgmii";
+                };
+
+                dp2 {
+                        device_type = "network";
+                        compatible = "qcom,nss-dp";
+                        clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+                        clock-names = "nss-snoc-gmac-axi-clk";
+                        qcom,id = <1>;
+                        reg = <0x39C00000 0x10000>;
+                        interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+                        qcom,mactype = <2>;
+                        qcom,link-poll = <1>;
+                        qcom,phy-mdio-addr = <7>;
+                        mdio-bus = <&mdio0>;
+                        local-mac-address = [000000000000];
+                        phy-mode = "sgmii";
+                };
+
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+
+			button@1 {
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio31", "gpio33";
+			function = "blsp1_uart1";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+				pins = "gpio9";
+				function = "qspi_clk";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_cs {
+				pins = "gpio8";
+				function = "qspi_cs";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_0 {
+				pins = "gpio7";
+				function = "qspi0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_1 {
+				pins = "gpio6";
+				function = "qspi1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_2 {
+				pins = "gpio5";
+				function = "qspi2";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_3 {
+				pins = "gpio4";
+				function = "qspi3";
+				drive-strength = <8>;
+				bias-disable;
+			};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		rst_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+	};
+	audio_pins: audio_pinmux {
+		mux_1 {
+			pins = "gpio24";
+			function = "audio_rxbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio25";
+			function = "audio_rxfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_5 {
+			pins = "gpio28";
+			function = "audio_txbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+	};
+	
+	pwm_pins: pwm_pinmux {
+	        mux_1 {
+	            pins = "gpio0";
+	            function = "pwm10";
+	            drive-strength = <8>;
+	        };
+		mux_2 {
+				pins = "gpio1";
+				function = "pwm20";
+				drive-strength = <8>;
+			};
+		mux_3 {
+				pins = "gpio45";
+				function = "pwm3";
+				drive-strength = <8>;
+			};
+	};
+
+};
+
+&soc {
+
+	 pwm: pwm@0x1941010 {
+	        pinctrl-0 = <&pwm_pins>;
+	        pinctrl-names = "default";
+	        used-pwm-indices = <1>, <1>, <1>, <1>;
+		dft-pwm-status = <1>, <0>, <0>, <0>;
+	        status = "ok";
+        };
+};
+
+&usb3 {
+	status = "disabled";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "ok";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "disabled";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "disabled";
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+		qrtr_instance_id = <0x21>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		memory-region = <&mhi_region1>;
+#if !defined(__CNSS2__)
+		base-addr = <0x4E900000>;
+		m3-dump-addr = <0x4FD00000>;
+		etr-addr = <0x4FE00000>;
+		qcom,caldb-addr = <0x4FF00000>;
+		qcom,tgt-mem-mode = <0x1>;
+		mhi,max-channels = <30>;
+		mhi,timeout = <10000>;
+		qcom,board_id = <0xa4>;
+#endif
+	};
+};
+
+&wifi3 {
+	status = "ok";
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	qcom,multipd_arch;
+	memory-region = <&q6_mem_regions>;
+	qcom,share_bootargs;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x2 0x4 0x2 0x12 0x0 0x0>;
+
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+		#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+		#endif
+	};
+
+	/* QCN6122 5G */
+	q6v5_wcss_userpd2 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <2>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+		#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+		#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&qgic_msi_0 {
+	status = "ok";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+	qcom,bdf-addr = <0x0 0x4C000000 0x4C000000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x0 0x4D000000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4D000000>;
+	m3-dump-addr = <0x4CE00000>;
+#endif
+	qcom,caldb-size = <0x200000>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x0 0x4D200000 0x4CF00000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x0 0x4E400000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4E400000>;
+	m3-dump-addr = <0x4E200000>;
+#endif
+	qcom,caldb-size = <0x500000>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts

@@ -0,0 +1,984 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
+	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	AUTO_MOUNT;
+	#endif
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+			
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+			 
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x27>;
+				switch_cpu_bmp = <0x40>;  
+				switch_lan_bmp = <0x1e>; 
+				switch_wan_bmp = <0x0>;  
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   
+						0x00008 0x1000000   
+						0x0000c 0x80        
+						0x00010 0x2613a0    
+						0x000e4 0xaa545     
+						0x000e0 0xc74164de  
+						0x0007c 0x4e        
+						0x00094 0x4e        
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+				};
+			}; 
+			
+		};
+
+		wifi0: wifi@c000000 {
+			qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000
+						0x0 0x0>;
+			qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000
+						0x0 0x0>;
+			qcom,caldb-size = <0x200000>;
+			status = "ok";
+		};
+
+		ess-uniphy@98000 {
+			status = "ok";
+		};
+
+		qcom,sps {
+			status = "ok";
+		};
+
+		qcom,usbbam@8B04000 {
+			status = "ok";
+		};
+
+		qcom,diag@0 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			/* qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <0 1 2 3>;
+			mdio-bus = <&mdio1>; */
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: blsp0_uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25", "gpio24", "gpio26";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_0 {
+			pins = "gpio7";
+			function = "qspi0";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_1 {
+			pins = "gpio6";
+			function = "qspi1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_2 {
+			pins = "gpio5";
+			function = "qspi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_3 {
+			pins = "gpio4";
+			function = "qspi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	audio_pins: audio_pinmux {
+		mux_1 {
+			pins = "gpio24";
+			function = "audio_rxbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio25";
+			function = "audio_rxfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio26";
+			function = "audio_rxd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio27";
+			function = "audio_txmclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_5 {
+			pins = "gpio28";
+			function = "audio_txbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_6 {
+			pins = "gpio29";
+			function = "audio_txfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_7 {
+			pins = "gpio30";
+			function = "audio_txd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	leds_pins: leds_pinmux {
+		sys_blue {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		sys_red {
+			pins = "gpio36";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		sys_green {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@30 {
+			label = "sys:blue";
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;  /* GPIO_30 */
+			default-state="on";
+		/*	linux,default-trigger = "timer";
+			active-delay = <700>;
+			inactive-delay = <700>;
+			default-state="on";		*/
+		};
+		led@36 {
+			label = "sys:red";
+			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;  /* GPIO_36 */
+			default-state="off";
+		/*	linux,default-trigger = "timer";
+			active-delay = <700>;
+			inactive-delay = <700>;
+			default-state="on";		*/
+		};
+		led@37 {
+			label = "sys:green";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;  /* GPIO_37 */
+			default-state="off";
+		/*	linux,default-trigger = "timer";
+			active-delay = <700>;
+			inactive-delay = <700>;
+			default-state="on";		*/
+		};
+	};
+
+};
+
+&usb3 {
+	status = "disabled";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "disabled";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "disabled";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&bt {
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "disabled";
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	qcom,multipd_arch;
+	memory-region = <&q6_mem_regions>;
+	qcom,share_bootargs;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+		#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+		#endif
+	};
+
+	/* QCN6122 6G */
+	q6v5_wcss_userpd2 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <2>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+		#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+		#endif
+	};
+
+	/* QCN6122 5G */
+	q6v5_wcss_userpd3 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+			<&wcss_smp2p_in 25 0>,
+			<&wcss_smp2p_in 28 0>,
+			<&wcss_smp2p_in 27 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+			<&wcss_smp2p_out 25>,
+			<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <3>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+		#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+		#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&qgic_msi_0 {
+	status = "ok";
+};
+
+&qgic_msi_1 {
+	status = "ok";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4D400000>;
+	m3-dump-addr = <0x4D200000>;
+#endif
+	qcom,caldb-size = <0x200000>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+#endif
+	qcom,caldb-size = <0x500000>;
+	status = "ok";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0xb0>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+#endif
+	qcom,caldb-size = <0x500000>;
+	status = "disabled";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50-5g.dts

@@ -0,0 +1,995 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Xunison D50-5G";
+	compatible = "xunison,d50-5g", "qcom,ipq5018-mp03.1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	AUTO_MOUNT;
+	#endif
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp2";
+		ethernet1 = "/soc/dp1";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*            256 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          8MB            |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x40800000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          23MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump| 0x4C700000   |          1MB            |
+	 * +--------+--------------+-------------------------+
+	 * | QDSS   | 0x4C800000   |          1MB            |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4C900000  |          17MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4DA00000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01700000>;
+		};
+
+		m3_dump@4c700000 {
+			no-map;
+			reg = <0x0 0x4C700000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		qcn9000_pcie0@4c900000 {
+			no-map;
+			reg = <0x0 0x4C900000 0x0 0x01100000>;
+		};
+
+		mhi_region1: dma_pool1@4da00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4da00000 0x0 0x01000000>;
+		};
+	#elif __IPQ_MEM_PROFILE_512_MB__
+	/*                      512 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          24MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4C800000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4C900000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4CA00000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4CC00000  |          30MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4EA00000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region:q6_caldb_region@4ca00000 {
+			no-map;
+			reg = <0x0 0x4ca00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x01E00000>;
+		};
+
+		mhi_region1: dma_pool1@4ea00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4ea00000 0x0 0x01000000>;
+		};
+	#else
+	/*                      1G Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          24MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4C800000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4C900000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4CA00000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4CC00000  |          45MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4F900000  |          24MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region:q6_caldb_region@4ca00000 {
+			no-map;
+			reg = <0x0 0x4ca00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x02D00000>;
+		};
+
+		mhi_region1: dma_pool1@4F900000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4F900000 0x0 0x01800000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x27>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000
+						0x0 0x0>;
+			qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000
+						0x0 0x0>;
+			qcom,caldb-size = <0x200000>;
+			status = "ok";
+		};
+
+		ess-uniphy@98000 {
+			status = "disabled";
+		};
+
+		qcom,sps {
+			status = "ok";
+		};
+
+		qcom,usbbam@8B04000 {
+			status = "ok";
+		};
+
+		qcom,diag@0 {
+			status = "ok";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		rpm_etm0 {
+			status = "disabled";
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys-polled";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		button@1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@35 {
+			label = "green:4g";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_5g_wifi";
+			default-state = "off";
+		};
+		led@30 {
+			label = "green:wifi";
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_2g_wifi";
+			default-state = "off";
+		};
+		led@1 {
+			label = "green:internet";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_voice";
+			default-state = "off";
+		};
+		led@33 {
+			label = "green:lte";
+			gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_lte_g";
+			default-state = "off";
+		};		
+		led@34 {
+			label = "red:lte";
+			gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_lte_r";
+			default-state = "off";
+		};	
+		led@27 {
+			label = "green:mesh";
+			gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_nr_g";
+			default-state = "off";
+		};
+		led@28 {
+			label = "red:mesh";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_nr_r";
+			default-state = "off";
+		};
+	};
+
+
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: blsp0_uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25", "gpio24", "gpio26";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+				pins = "gpio9";
+				function = "qspi_clk";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_cs {
+				pins = "gpio8";
+				function = "qspi_cs";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_0 {
+				pins = "gpio7";
+				function = "qspi0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_1 {
+				pins = "gpio6";
+				function = "qspi1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_2 {
+				pins = "gpio5";
+				function = "qspi2";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_3 {
+				pins = "gpio4";
+				function = "qspi3";
+				drive-strength = <8>;
+				bias-disable;
+			};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button{
+			pins = "gpio22";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		
+		wps_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		
+	};
+	
+	leds_pins: leds_pins {
+		led_5g_wifi {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g_wifi {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lte_g {
+			pins = "gpio33";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lte_r {
+			pins = "gpio34";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_nr_g {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_nr_r {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_voice {
+			pins = "gpio1";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};	
+	};
+
+	audio_pins: audio_pinmux {
+		mux_1 {
+			pins = "gpio24";
+			function = "audio_rxbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio25";
+			function = "audio_rxfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio26";
+			function = "audio_rxd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio27";
+			function = "audio_txmclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_5 {
+			pins = "gpio28";
+			function = "audio_txbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_6 {
+			pins = "gpio29";
+			function = "audio_txfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_7 {
+			pins = "gpio30";
+			function = "audio_txd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	qcom,phy-mux-regs = <&tcsr_q6_block 0x2540>;
+	device-power-gpio = <&tlmm 24 1>;
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "disabled";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "ok";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&bt {
+	status = "ok";
+};
+
+&wcss {
+	status = "ok";
+};
+
+&q6v5_wcss {
+	status = "disabled";
+};
+
+&q6v5_m3 {
+	status = "disabled";
+};
+
+&tcsr_mutex_block {
+	status = "ok";
+};
+
+&tcsr_mutex {
+	status = "ok";
+};
+
+&smem {
+	status = "ok";
+};
+
+&apcs_glb {
+	status = "ok";
+};
+
+&tcsr_q6_block {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_region>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_region>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&dbm_1p5 {
+	status = "ok";
+};
+
+&msm_imem {
+	status = "ok";
+};
+
+&blsp1_uart1 {
+	status = "ok";
+};
+
+&ssuniphy_0 {
+	status = "ok";
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "ok";
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "ok";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+		qrtr_instance_id = <0x20>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		memory-region = <&mhi_region1>;
+#if !defined(__CNSS2__)
+		base-addr = <0x4CC00000>;
+		m3-dump-addr = <0x4E000000>;
+		etr-addr = <0x4E100000>;
+		qcom,caldb-addr = <0x4E200000>;
+		qcom,tgt-mem-mode = <0x1>;
+		mhi,max-channels = <30>;
+		mhi,timeout = <10000>;
+#endif
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,board_id = <0x24>;
+	status = "ok";
+};
+
+&wifi3 {
+	/* QCN9000 5G */
+	board_id = <0xa0>;
+	status = "ok";
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-xunison-d50.dts

@@ -0,0 +1,884 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Xunison D50";
+	compatible = "xunison,d50", "qcom,ipq5018-mp03.1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	AUTO_MOUNT;
+	#endif
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*            256 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          8MB            |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x40800000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          23MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump| 0x4C700000   |          1MB            |
+	 * +--------+--------------+-------------------------+
+	 * | QDSS   | 0x4C800000   |          1MB            |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4C900000  |          17MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4DA00000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01700000>;
+		};
+
+		m3_dump@4c700000 {
+			no-map;
+			reg = <0x0 0x4C700000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		qcn9000_pcie0@4c900000 {
+			no-map;
+			reg = <0x0 0x4C900000 0x0 0x01100000>;
+		};
+
+		mhi_region1: dma_pool1@4da00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4da00000 0x0 0x01000000>;
+		};
+	#elif __IPQ_MEM_PROFILE_512_MB__
+	/*                      512 MB Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          24MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4C800000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4C900000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4CA00000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4CC00000  |          30MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4EA00000  |          16MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region:q6_caldb_region@4ca00000 {
+			no-map;
+			reg = <0x0 0x4ca00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x01E00000>;
+		};
+
+		mhi_region1: dma_pool1@4ea00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4ea00000 0x0 0x01000000>;
+		};
+	#else
+	/*                      1G Profile
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |  NSS   |  0x40000000  |          16MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  | Depends on total memory |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * | uboot  |  0x4A600000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |  SBL   |  0x4AA00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  smem  |  0x4AB00000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |   TZ   |  0x4AC00000  |           4MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |   Q6   |  0x4B000000  |          24MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | M3 Dump|  0x4C800000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * |  QDSS  |  0x4C900000  |           1MB           |
+	 * +--------+--------------+-------------------------+
+	 * | caldb  |  0x4CA00000  |           2MB           |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |QCN9000 |  0x4CC00000  |          45MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |  MHI1  |  0x4F900000  |          24MB           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |                                                 |
+	 * |      Rest of the memory for Linux               |
+	 * |                                                 |
+	 * +=================================================+
+	 */
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region:q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region:q6_caldb_region@4ca00000 {
+			no-map;
+			reg = <0x0 0x4ca00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4CC00000 0x0 0x02D00000>;
+		};
+
+		mhi_region1: dma_pool1@4F900000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4F900000 0x0 0x01800000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x27>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000
+						0x0 0x0>;
+			qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000
+						0x0 0x0>;
+			qcom,caldb-size = <0x200000>;
+			status = "ok";
+		};
+
+		ess-uniphy@98000 {
+			status = "disabled";
+		};
+
+		qcom,sps {
+			status = "ok";
+		};
+
+		qcom,usbbam@8B04000 {
+			status = "ok";
+		};
+
+		qcom,diag@0 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		rpm_etm0 {
+			status = "disabled";
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: blsp0_uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25", "gpio24", "gpio26";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+				pins = "gpio9";
+				function = "qspi_clk";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_cs {
+				pins = "gpio8";
+				function = "qspi_cs";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_0 {
+				pins = "gpio7";
+				function = "qspi0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_1 {
+				pins = "gpio6";
+				function = "qspi1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_2 {
+				pins = "gpio5";
+				function = "qspi2";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_3 {
+				pins = "gpio4";
+				function = "qspi3";
+				drive-strength = <8>;
+				bias-disable;
+			};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	audio_pins: audio_pinmux {
+		mux_1 {
+			pins = "gpio24";
+			function = "audio_rxbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio25";
+			function = "audio_rxfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio26";
+			function = "audio_rxd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio27";
+			function = "audio_txmclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_5 {
+			pins = "gpio28";
+			function = "audio_txbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_6 {
+			pins = "gpio29";
+			function = "audio_txfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_7 {
+			pins = "gpio30";
+			function = "audio_txd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	qcom,phy-mux-regs = <&tcsr_q6_block 0x2540>;
+	device-power-gpio = <&tlmm 24 1>;
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "disabled";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "ok";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&bt {
+	status = "ok";
+};
+
+&wcss {
+	status = "ok";
+};
+
+&q6v5_wcss {
+	status = "disabled";
+};
+
+&q6v5_m3 {
+	status = "disabled";
+};
+
+&tcsr_mutex_block {
+	status = "ok";
+};
+
+&tcsr_mutex {
+	status = "ok";
+};
+
+&smem {
+	status = "ok";
+};
+
+&apcs_glb {
+	status = "ok";
+};
+
+&tcsr_q6_block {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_region>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_region>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&dbm_1p5 {
+	status = "ok";
+};
+
+&msm_imem {
+	status = "ok";
+};
+
+&blsp1_uart1 {
+	status = "ok";
+};
+
+&ssuniphy_0 {
+	status = "ok";
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "ok";
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "ok";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+		qrtr_instance_id = <0x20>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		memory-region = <&mhi_region1>;
+#if !defined(__CNSS2__)
+		base-addr = <0x4CC00000>;
+		m3-dump-addr = <0x4E000000>;
+		etr-addr = <0x4E100000>;
+		qcom,caldb-addr = <0x4E200000>;
+		qcom,tgt-mem-mode = <0x1>;
+		mhi,max-channels = <30>;
+		mhi,timeout = <10000>;
+#endif
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,board_id = <0x24>;
+	status = "ok";
+};
+
+&wifi3 {
+	/* QCN9000 5G */
+	board_id = <0xa0>;
+	status = "ok";
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/image/ipq50xx.mk

@@ -1,5 +1,24 @@
 KERNEL_LOADADDR := 0x41208000
 
+define Device/FitImage
+        KERNEL_SUFFIX := -uImage.itb
+        KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+        KERNEL_NAME := Image
+endef
+
+define Device/FitImageLzma
+        KERNEL_SUFFIX := -uImage.itb
+        KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
+        KERNEL_NAME := Image
+endef
+
+define Device/UbiFit
+        KERNEL_IN_UBI := 1
+        IMAGES := factory.ubi sysupgrade.bin
+        IMAGE/factory.ubi := append-ubi
+        IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
 define Device/cig_wf186w
   DEVICE_TITLE := Cigtech WF-186w
   DEVICE_DTS := qcom-ipq5018-cig-wf186w
@@ -9,6 +28,15 @@ define Device/cig_wf186w
 endef
 TARGET_DEVICES += cig_wf186w
 
+define Device/cig_wf186h
+  DEVICE_TITLE := Cigtech WF-186h
+  DEVICE_DTS := qcom-ipq5018-cig-wf186h
+  SUPPORTED_DEVICES := cig,wf186h
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf186h ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += cig_wf186h
+
 define Device/cybertan_eww622_a1
   DEVICE_TITLE := CyberTan EWW622-A1
   DEVICE_DTS := qcom-ipq5018-eww622-a1
@@ -27,6 +55,15 @@ define Device/cybertan_eww631_a1
 endef
 TARGET_DEVICES += cybertan_eww631_a1
 
+define Device/wallys_dr5018
+  DEVICE_TITLE := Wallys DR5018
+  DEVICE_DTS := qcom-ipq5018-wallys-dr5018
+  SUPPORTED_DEVICES := wallys,dr5018
+  DEVICE_PACKAGES := ath11k-wifi-wallys-dr5018 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += wallys_dr5018
+
 define Device/cybertan_eww631_b1
   DEVICE_TITLE := CyberTan EWW631-B1
   DEVICE_DTS := qcom-ipq5018-eww631-b1
@@ -92,6 +129,33 @@ define Device/qcom_mp03_3
 endef
 TARGET_DEVICES += qcom_mp03_3
 
+define Device/hfcl_ion4xi_w
+  DEVICE_TITLE := HFCL ION4xi_w
+  DEVICE_DTS := qcom-ipq5018-hfcl-ion4xi_w
+  SUPPORTED_DEVICES := hfcl,ion4xi_w
+  DEVICE_PACKAGES := ath11k-wifi-hfcl-ion4xi_w ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += hfcl_ion4xi_w
+
+define Device/hfcl_ion4x_w
+  DEVICE_TITLE := HFCL ION4x_w
+  DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w
+  SUPPORTED_DEVICES := hfcl,ion4x_w
+  DEVICE_PACKAGES := ath11k-wifi-hfcl-ion4x_w ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += hfcl_ion4x_w
+
+define Device/hfcl_ion4xi_HMR
+  DEVICE_TITLE := HFCL ION4xi_HMR
+  DEVICE_DTS := qcom-ipq5018-hfcl-ion4xi_HMR
+  SUPPORTED_DEVICES := hfcl,ion4xi_HMR
+  DEVICE_PACKAGES := ath11k-wifi-hfcl-ion4xi_HMR ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += hfcl_ion4xi_HMR
+
 define Device/yuncore_fap655
   DEVICE_TITLE := Yuncore FAP650
   DEVICE_DTS := qcom-ipq5018-yuncore-fap655
@@ -100,3 +164,30 @@ define Device/yuncore_fap655
   DEVICE_DTS_CONFIG := config@mp03.3
 endef
 TARGET_DEVICES += yuncore_fap655
+
+define Device/xunison_d50-5g
+  DEVICE_TITLE := Xunison D50-5G
+  DEVICE_DTS := qcom-ipq5018-xunison-d50-5g
+  SUPPORTED_DEVICES := xunison,d50_5g
+  DEVICE_PACKAGES := ath11k-wifi-xunison-d50 ath11k-firmware-ipq50xx ath11k-firmware-qcn9000 
+  DEVICE_DTS_CONFIG := config@mp03.1
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += xunison_d50-5g
+
+define Device/xunison_d50
+  DEVICE_TITLE := Xunison D50
+  DEVICE_DTS := qcom-ipq5018-xunison-d50
+  SUPPORTED_DEVICES := xunison,d50
+  DEVICE_PACKAGES := ath11k-wifi-xunison-d50 ath11k-firmware-ipq50xx ath11k-firmware-qcn9000 ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.1
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += xunison_d50

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -13,14 +13,23 @@ define Device/cig_wf660a
 endef
 TARGET_DEVICES += cig_wf660a
 
-define Device/cig_wf188n
+define Device/cig_wf188n-ca
   DEVICE_TITLE := Cigtech WF-188n
   DEVICE_DTS := qcom-ipq6018-cig-wf188n
   DEVICE_DTS_CONFIG := config@cp03-c1
   SUPPORTED_DEVICES := cig,wf188n
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf188n uboot-env
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf188n-ca uboot-env
 endef
-TARGET_DEVICES += cig_wf188n
+TARGET_DEVICES += cig_wf188n-ca
+
+define Device/cig_wf188n-us
+  DEVICE_TITLE := Cigtech WF-188n
+  DEVICE_DTS := qcom-ipq6018-cig-wf188n
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := cig,wf188n
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf188n-us uboot-env
+endef
+TARGET_DEVICES += cig_wf188n-us
 
 define Device/hfcl_ion4xe
   DEVICE_TITLE := HFCL ION4Xe

feeds/ipq807x/ipq807x/ipq60xx/config-default

@@ -82,7 +82,7 @@ CONFIG_MIGRATION=y
 CONFIG_MPILIB=y
 CONFIG_MSM_SECURE_BUFFER=y
 CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_SWITCHDEV=y
+# CONFIG_NET_SWITCHDEV is not set
 CONFIG_NUM_ALT_PARTITION=16
 CONFIG_OF_IOMMU=y
 CONFIG_OID_REGISTRY=y

feeds/ipq807x/ipq807x/ipq807x/config-default

@@ -4,7 +4,7 @@ CONFIG_ARCH_IPQ807x=y
 CONFIG_IPQ_ADSS_807x=y
 CONFIG_IPQ_APSS_807x=y
 CONFIG_IPQ_GCC_807x=y
-CONFIG_NET_SWITCHDEV=y
+# CONFIG_NET_SWITCHDEV is not set
 CONFIG_NUM_ALT_PARTITION=16
 CONFIG_PINCTRL_IPQ807x=y
 # CONFIG_IPC_LOGGING is not set

feeds/ipq807x/ipq807x/patches/238-net-core-Allow-live-renaming-when-an-interface-is-up.patch

@@ -0,0 +1,67 @@
+From: Andy Ren <andy.ren@getcruise.com>
+Date: Mon, 7 Nov 2022 09:42:42 -0800
+Subject: [PATCH] net/core: Allow live renaming when an interface is up
+
+Allow a network interface to be renamed when the interface
+is up.
+
+As described in the netconsole documentation [1], when netconsole is
+used as a built-in, it will bring up the specified interface as soon as
+possible. As a result, user space will not be able to rename the
+interface since the kernel disallows renaming of interfaces that are
+administratively up unless the 'IFF_LIVE_RENAME_OK' private flag was set
+by the kernel.
+
+The original solution [2] to this problem was to add a new parameter to
+the netconsole configuration parameters that allows renaming of
+the interface used by netconsole while it is administratively up.
+However, during the discussion that followed, it became apparent that we
+have no reason to keep the current restriction and instead we should
+allow user space to rename interfaces regardless of their administrative
+state:
+
+1. The restriction was put in place over 20 years ago when renaming was
+only possible via IOCTL and before rtnetlink started notifying user
+space about such changes like it does today.
+
+2. The 'IFF_LIVE_RENAME_OK' flag was added over 3 years ago in version
+5.2 and no regressions were reported.
+
+3. In-kernel listeners to 'NETDEV_CHANGENAME' do not seem to care about
+the administrative state of interface.
+
+Therefore, allow user space to rename running interfaces by removing the
+restriction and the associated 'IFF_LIVE_RENAME_OK' flag. Help in
+possible triage by emitting a message to the kernel log that an
+interface was renamed while UP.
+
+[1] https://www.kernel.org/doc/Documentation/networking/netconsole.rst
+[2] https://lore.kernel.org/netdev/20221102002420.2613004-1-andy.ren@getcruise.com/
+
+Signed-off-by: Andy Ren <andy.ren@getcruise.com>
+Reviewed-by: Ido Schimmel <idosch@nvidia.com>
+Reviewed-by: David Ahern <dsahern@kernel.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -1152,8 +1152,6 @@ int dev_change_name(struct net_device *d
+ 	BUG_ON(!dev_net(dev));
+ 
+ 	net = dev_net(dev);
+-	if (dev->flags & IFF_UP)
+-		return -EBUSY;
+ 
+ 	write_seqcount_begin(&devnet_rename_seq);
+ 
+@@ -1171,7 +1169,8 @@ int dev_change_name(struct net_device *d
+ 	}
+ 
+ 	if (oldname[0] && !strchr(oldname, '%'))
+-		netdev_info(dev, "renamed from %s\n", oldname);
++		netdev_info(dev, "renamed from %s%s\n", oldname,
++			    dev->flags & IFF_UP ? " (while UP)" : "");
+ 
+ 	old_assign_type = dev->name_assign_type;
+ 	dev->name_assign_type = NET_NAME_RENAMED;

feeds/ipq807x/ipq807x/patches/700-RTL8367C_S.patch

@@ -1,19 +1,22 @@
---- a/drivers/net/phy/Kconfig	2023-03-16 09:38:22.742281029 +0800
-+++ b/drivers/net/phy/Kconfig	2023-03-16 09:41:46.400370236 +0800
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/Kconfig
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/drivers/net/phy/Kconfig
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/Kconfig
 @@ -332,6 +332,10 @@ config RTL8367B_PHY
-        tristate "Driver fot the Realtek RTL8367R-VB switch"
-        select SWCONFIG
-
+ 	tristate "Driver fot the Realtek RTL8367R-VB switch"
+ 	select SWCONFIG
+ 
 +config RTL8367C_PHY
 +       tristate "Driver fot the Realtek RTL8367C/S switch"
 +       select SWCONFIG
 +
  endif # RTL8366_SMI
-
+ 
  source "drivers/net/phy/b53/Kconfig"
-
---- a/drivers/net/phy/Makefile	2023-03-16 09:38:12.210161055 +0800
-+++ b/drivers/net/phy/Makefile	2023-03-16 09:41:14.548069150 +0800
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/Makefile
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/drivers/net/phy/Makefile
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/Makefile
 @@ -34,6 +34,7 @@ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
  obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
  obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
@@ -22,9 +25,10 @@
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
  obj-$(CONFIG_B53)		+= b53/
-
---- a/drivers/net/phy/rtl8366_smi.h	2023-03-21 09:29:19.422575683 +0800
-+++ b/drivers/net/phy/rtl8366_smi.h	2023-03-20 08:55:48.041464368 +0800
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/rtl8366_smi.h
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/drivers/net/phy/rtl8366_smi.h
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/rtl8366_smi.h
 @@ -14,6 +14,7 @@
  #include <linux/phy.h>
  #include <linux/switch.h>
@@ -80,8 +84,10 @@
  
  struct rtl8366_smi* rtl8366_smi_probe(struct platform_device *pdev);
  
---- a/drivers/net/phy/rtl8366_smi.c	2023-03-21 09:28:56.426383208 +0800
-+++ b/drivers/net/phy/rtl8366_smi.c	2023-03-21 09:15:07.869753295 +0800
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/rtl8366_smi.c
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/drivers/net/phy/rtl8366_smi.c
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/rtl8366_smi.c
 @@ -19,6 +19,8 @@
  #include <linux/of_platform.h>
  #include <linux/of_gpio.h>
@@ -382,6 +388,18 @@
  int rtl8366_sw_get_vlan_info(struct switch_dev *dev,
  			     const struct switch_attr *attr,
  			     struct switch_val *val)
+@@ -1207,9 +1428,9 @@ int rtl8366_sw_set_vlan_enable(struct sw
+ 	if (attr->ofs > 2)
+ 		return -EINVAL;
+ 
+-	if (attr->ofs == 1)
++/*	if (attr->ofs == 1)
+ 		err = rtl8366_enable_vlan(smi, val->value.i);
+-	else
++	else*/
+ 		err = rtl8366_enable_vlan4k(smi, val->value.i);
+ 
+ 	return err;
 @@ -1237,25 +1458,27 @@ static int __rtl8366_smi_init(struct rtl
  {
  	int err;
@@ -525,9 +543,11 @@
 +	return ERR_PTR(err);
  }
  EXPORT_SYMBOL_GPL(rtl8366_smi_probe);
-
---- a/drivers/net/phy/rtl8367c.c	2023-05-31 15:05:26.928595310 +0800
-+++ b/drivers/net/phy/rtl8367c.c	2023-05-31 15:09:38.943976240 +0800
+ 
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/rtl8367c.c
+===================================================================
+--- /dev/null
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/rtl8367c.c
 @@ -0,0 +1,2462 @@
 +/*
 + * Platform driver for the Realtek RTL8367R-VB/S/C ethernet switches
@@ -2432,7 +2452,7 @@
 +	data[0] |= (vlan4k->untag & RTL8367B_TA_VLAN0_UNTAG_MASK) <<
 +		   RTL8367B_TA_VLAN0_UNTAG_SHIFT;
 +	data[1] = (vlan4k->fid & RTL8367B_TA_VLAN1_FID_MASK) <<
-+		  RTL8367B_TA_VLAN1_FID_SHIFT;
++		  RTL8367B_TA_VLAN1_FID_SHIFT | (1 << 14);
 +
 +	for (i = 0; i < ARRAY_SIZE(data); i++)
 +		REG_WR(smi, RTL8367B_TA_WRDATA_REG(i), data[i]);
@@ -2991,8 +3011,10 @@
 +MODULE_LICENSE("GPL v2");
 +MODULE_ALIAS("platform:" RTL8367B_DRIVER_NAME);
 +
---- a/include/linux/rtl8367.h	2023-05-31 16:18:04.480612826 +0800
-+++ b/include/linux/rtl8367.h	2023-05-25 16:18:41.452870197 +0800
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/include/linux/rtl8367.h
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/include/linux/rtl8367.h
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/include/linux/rtl8367.h
 @@ -18,6 +18,8 @@ enum rtl8367_port_speed {
  	RTL8367_PORT_SPEED_10 = 0,
  	RTL8367_PORT_SPEED_100,
@@ -3016,8 +3038,10 @@
  };
  
  struct rtl8367_extif_config {
---- a/drivers/net/phy/mdio-qca.c	2023-05-31 16:18:19.152756159 +0800
-+++ b/drivers/net/phy/mdio-qca.c	2023-05-31 16:21:18.086437571 +0800
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/mdio-qca.c
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/drivers/net/phy/mdio-qca.c
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/net/phy/mdio-qca.c
 @@ -37,8 +37,9 @@
  #define MDIO_CTRL_4_ACCESS_CODE_C45_ADDR	0
  #define MDIO_CTRL_4_ACCESS_CODE_C45_WRITE	1

feeds/ipq807x/qca-ssdk/patches/400-max_vlan.patch

@@ -0,0 +1,13 @@
+Index: qca-ssdk/include/init/ssdk_plat.h
+===================================================================
+--- qca-ssdk.orig/include/init/ssdk_plat.h
++++ qca-ssdk/include/init/ssdk_plat.h
+@@ -160,7 +160,7 @@
+ #define AR8327_NUM_PHYS                              5
+ #define AR8327_PORT_CPU                              0
+ #define AR8327_NUM_PORTS                             7
+-#define AR8327_MAX_VLANS                             128
++#define AR8327_MAX_VLANS                             4095
+ 
+ #define MII_PHYADDR_C45                              (1<<30)
+ 

feeds/ipq807x/qca-thermald-10.4/Makefile

@@ -35,6 +35,8 @@ define Package/qca-thermald-10.4/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/install/etc/thermal/ipq-thermald-8064.conf $(1)/etc/thermal
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/install/etc/thermal/ipq-thermald-8066.conf $(1)/etc/thermal
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/install/etc/thermal/ipq-thermald-8069.conf $(1)/etc/thermal
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/install/etc/thermal/ipq-thermald-cybertan-eww631-a1.conf $(1)/etc/thermal
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/install/etc/thermal/ipq-thermald-cybertan-eww631-b1.conf $(1)/etc/thermal
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/thermal.init $(1)/etc/init.d/thermal
 	$(INSTALL_DIR) $(1)/etc/config

feeds/ipq807x/qca-thermald-10.4/files/thermal.init

@@ -5,6 +5,8 @@ START=98
 SERVICE_WRITE_PID=1
 SERVICE_DAEMONIZE=1
 
+board=$(board_name)
+
 start() {
 	. /lib/functions.sh
 
@@ -14,10 +16,19 @@ start() {
 	config_get_bool enabled config 'Enabled' '0'
 
 	[ "$enabled" -gt 0 ] || return 1
-
-	service_start /usr/sbin/thermald
+	case "$board" in
+	cybertan,eww631-a1)
+		service_start /usr/sbin/thermald -c /etc/thermal/ipq-thermald-cybertan-eww631-a1.conf
+		;;
+	cybertan,eww631-b1)
+		service_start /usr/sbin/thermald -c /etc/thermal/ipq-thermald-cybertan-eww631-b1.conf
+		;;
+	*)
+		service_start /usr/sbin/thermald
+		;;
+	esac
 }
 
 stop() {
 	service_stop /usr/sbin/thermald
-}
+}

feeds/ipq807x/qca-thermald-10.4/src/Makefile

@@ -18,6 +18,9 @@ endif
 
 export CC = $(CROSS)gcc
 export CFLAGS += -O2 -Wall -DIPQ_806x -c
+ifeq ($(SoC),$(filter $(SoC),ipq50xx ipq50xx_64))
+export CFLAGS += -DIPQ_5000
+endif
 export STRIP = $(CROSS)strip
 export SOURCES= \
 		thermal.c \
@@ -63,6 +66,7 @@ install: local
 	cp -a -f $(ALL) $(INSTALL_ROOT)/usr/sbin/
 	mkdir -p $(INSTALL_ROOT)/etc/thermal
 	cp -a -f ipq-thermald-806?.conf $(INSTALL_ROOT)/etc/thermal/
+	cp -a -f ipq-thermald-cybertan-eww631-*.conf $(INSTALL_ROOT)/etc/thermal/
 	@echo Installed outputs from `pwd`
 
 # Remove all generated files

feeds/ipq807x/qca-thermald-10.4/src/ipq-thermald-cybertan-eww631-a1.conf

@@ -0,0 +1,15 @@
+sampling 5000
+
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr		0			100			105			110			115
+actions 			cooling		cooling	 	cooling		cooling		shutdown
+action_info 		35			35	 		50			70			800000
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds			105			107			112			119			120
+thresholds_clr		0			100			105			110			115
+actions 			cooling	 	cooling		cooling		cooling		shutdown
+action_info			0			20			30	 		50			800000

feeds/ipq807x/qca-thermald-10.4/src/ipq-thermald-cybertan-eww631-b1.conf

@@ -0,0 +1,15 @@
+sampling 5000
+
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds			70			80			90			105			115			120
+thresholds_clr		0			75			85			100			110			113
+actions				cooling		cooling		cooling		cooling		cooling		shutdown
+action_info 		0			25	 		45			65			90			800000
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds			70			80			90			105			115			120
+thresholds_clr		0			75			85			100			110			113
+actions 			cooling		cooling		cooling		cooling		cooling		shutdown
+action_info 		0			15			25			45			60			800000

feeds/ipq807x/qca-thermald-10.4/src/thermal.h

@@ -138,7 +138,14 @@ enum therm_msm_id {
 	THERM_IPQ_6018,
 	THERM_IPQ_6028,
 	THERM_IPQ_6000,
-	THERM_IPQ_6010
+	THERM_IPQ_6010,
+	THERM_IPQ_6005,
+	THERM_IPQ_5010,
+	THERM_IPQ_5018,
+	THERM_IPQ_5028,
+	THERM_IPQ_5000,
+	THERM_IPQ_0509,
+	THERM_IPQ_0518
 };
 
 enum therm_msm_id therm_get_msm_id(void);
@@ -158,6 +165,9 @@ enum {
 #ifdef IPQ_806x
 	POWERSAVE,
 	NSS_FREQ,
+#ifdef IPQ_5000
+	COOLING,
+#endif
 #else
 	REPORT,
 	LCD,
@@ -311,6 +321,9 @@ int cpufreq_request(int cpu, int requester, int temperature, int frequency);
 int powersave_request( int enable );
 int nssfreq_request( int frequency );
 int powerctl_restart(int reset_max);
+#ifdef IPQ_5000
+int cooling_request( int requester, int temperature, int percentage );
+#endif
 #else
 int report_action(int requester, int temperature, int level, int is_trigger);
 int lcd_brightness_request(int requester, int temperature, int value);

feeds/ipq807x/qca-thermald-10.4/src/thermal_actions.c

@@ -45,7 +45,7 @@
 #define NUM_US_IN_MS        (1000)
 #define CPU_BUF_MAX         (50)
 #define HOTPLUG_BUF_MAX     (1024)
-
+#define SHUTDOWN_BUF_MAX    (100)
 enum {
 	MITIGATION_ENABLE = 0,
 	MITIGATION_DISABLE = 1
@@ -116,6 +116,8 @@ int shutdown_action(int requester, int temperature, int delay)
 {
 	static int shutdown_requested = 0;
 	int ret = 0;
+	int fd;
+	char buf[SHUTDOWN_BUF_MAX] = {0};
 
 	if (requester < 0 ||
 	    requester >= SENSOR_IDX_MAX) {
@@ -134,6 +136,15 @@ int shutdown_action(int requester, int temperature, int delay)
 		    "with %d millisecond delay\n",
 		    SENSOR(requester), temperature, delay);
 
+		fd = open("/dev/console", O_RDWR, 0);
+		if (fd >= 0)
+		{
+			snprintf(buf, SHUTDOWN_BUF_MAX, "THERMAL SHUTDOWN: "
+				"%s reached temperature %d with %d mSec Delay \n",
+				SENSOR(requester), temperature, delay);
+			write(fd,buf,SHUTDOWN_BUF_MAX);
+			close(fd);
+		}
 		usleep(delay * NUM_US_IN_MS);
 
 		/* commit buffers to disk and shutdown */
@@ -403,7 +414,7 @@ int cpufreq_init()
 		return -1;
 	}
 	info("Number of cpus :%d\n", num_cpus);
-	memset(online, 0, MAX_CPUS);
+	memset(online, 0, MAX_CPUS * sizeof(int));
 
 	for (cpu = 0; cpu < num_cpus; cpu++) {
 		snprintf(finfo_buf, MAX_PATH, CPU_SYSFS(FMAX_INFO_NODE), cpu);
@@ -1384,6 +1395,99 @@ int nssfreq_request(int frequency)
         pthread_mutex_unlock(&nssfreq_set_mtx);
         return ret;
 }
+#ifdef IPQ_5000
+/*===========================================================================
+FUNCTION cooling_request
+
+Action function to request wlan throttling action
+
+ARGUMENTS
+        percentage => duty cycle of tx queues suspending
+
+RETURN VALUE
+        0 on success, -1 on failure.
+===========================================================================*/
+static int cooling_req[2];
+#define COOLING_24G_MITIGATION_SYSFS "/sys/class/thermal/cooling_device0/cur_state"
+#define COOLING_5G_MITIGATION_SYSFS "/sys/class/thermal/cooling_device1/cur_state"
+#define MAX_COOLING_MITIGATION_PERCENTAGE  (90)
+
+static pthread_mutex_t cooling_mtx = PTHREAD_MUTEX_INITIALIZER;
+
+int cooling_request(int requester, int temperature, int percentage )
+{
+	int ret = -1;
+	char buf[UINT_BUF_MAX] = {0};
+	static int current_24g_percentage, current_5g_percentage;
+	char * end_ptr;
+
+	if ((NULL == COOLING_24G_MITIGATION_SYSFS) || (NULL == COOLING_5G_MITIGATION_SYSFS)) {
+		msg("%s: Unsupported action on current target", __func__);
+		return -1;
+	}
+
+	temperature = RCONV(temperature);
+
+	if (percentage < 0)
+		percentage = 0;
+
+	if (percentage > MAX_COOLING_MITIGATION_PERCENTAGE)
+		percentage = MAX_COOLING_MITIGATION_PERCENTAGE;
+
+	pthread_mutex_lock(&cooling_mtx);
+
+	if (requester == 1) {
+	/* get current cooling percentage */
+		if (read_line_from_file(COOLING_24G_MITIGATION_SYSFS, buf, UINT_BUF_MAX) > 0) {
+			current_24g_percentage = strtol(buf, &end_ptr, 10);
+			dbgmsg("current 2g cooling percentage(%d)\n", current_24g_percentage);
+		}
+
+		/* Aggregate cooling throttling percentage for 24g */
+		cooling_req[requester] = percentage;
+
+		if (percentage != current_24g_percentage) {
+			snprintf(buf, UINT_BUF_MAX, "%d", percentage);
+			if (write_to_file(COOLING_24G_MITIGATION_SYSFS, buf, strlen(buf)) > 0) {
+				info("ACTION: COOLING - "
+				    "Setting 24G COOLING mitigation to %d\n", percentage);
+				ret = 0;
+			} else {
+				msg("Unable to set COOLING mitigation to %d\n", percentage);
+			}
+		} else {
+			dbgmsg("COOLING mitigation already at %d percentage\n", percentage);
+			ret = 0;
+		}
+	}
+	else if (requester == 4) {
+	/* get current 5g cooling percentage */
+		if (read_line_from_file(COOLING_5G_MITIGATION_SYSFS, buf, UINT_BUF_MAX) > 0) {
+			current_5g_percentage = strtol(buf, &end_ptr, 10);
+			dbgmsg("current 5g cooling percentage(%d)\n", current_5g_percentage);
+		}
+
+		/* Aggregate cooling throttling percentage for 5g */
+		cooling_req[requester] = percentage;
+
+		if (percentage != current_5g_percentage) {
+			snprintf(buf, UINT_BUF_MAX, "%d", percentage);
+			if (write_to_file(COOLING_5G_MITIGATION_SYSFS, buf, strlen(buf)) > 0) {
+				info("ACTION: COOLING - "
+				    "Setting 5G COOLING mitigation to %d\n", percentage);
+				ret = 0;
+			} else {
+				msg("Unable to set COOLING mitigation to %d\n", percentage);
+			}
+		} else {
+			dbgmsg("COOLING mitigation already at %d percentage\n", percentage);
+			ret = 0;
+		}
+	}
+	pthread_mutex_unlock(&cooling_mtx);
+	return ret;
+}
+#endif
 
 /*===========================================================================
 FUNCTION set_mitigation_level

feeds/ipq807x/qca-thermald-10.4/src/thermal_config.c

@@ -43,6 +43,9 @@ static char *action_names[] = {
 #ifdef IPQ_806x
         "powersave",
 	"nss",
+#ifdef IPQ_5000
+	"cooling"
+#endif
 #else
 	"report",
 	"lcd",
@@ -337,6 +340,41 @@ def_sensor_setting_t def_cp_setting = {
 	.sensors = def_sensor_cp
 };
 
+/* TODO: Fix desc, id, lvl_trig, lvl_clr */
+sensor_setting_t def_sensor_mp[] = {
+	{
+		.desc = "tsens_tz_sensor4",
+		.id = 4,
+		.disabled = 0, /* Sensor enabled */
+		.sampling_period_us = 1000,
+		.num_thresholds = 1, /* No. of threshold levels */
+
+		.t = {
+			{
+				.lvl_trig = 120,
+				.num_actions = 1,
+				.actions = {
+					{
+						.action = SHUTDOWN,
+						.info = 1000
+					}
+				}
+			}
+		},
+
+		/* Internal variables initialized with threshold count */
+		._n_thresholds = 1,
+		._n_to_clear = 1,
+		._n_actions = 1,
+		._n_action_info = 1
+	},
+};
+
+def_sensor_setting_t def_mp_setting = {
+	.sensor_count = 1,
+	.sensors = def_sensor_mp
+};
+
 /* IPQ806x */
 sensor_setting_t def_ipq8064[] = {
 	{
@@ -638,9 +676,19 @@ void update_def_sensor_settings(thermal_setting_t *settings)
 		case THERM_IPQ_6028:
 		case THERM_IPQ_6000:
 		case THERM_IPQ_6010:
+		case THERM_IPQ_6005:
 			msg("==== IPQ60xx ====\n");
 			def_sensor_setting = &def_cp_setting;
 			break;
+		case THERM_IPQ_5010:
+		case THERM_IPQ_5018:
+		case THERM_IPQ_5028:
+		case THERM_IPQ_5000:
+		case THERM_IPQ_0509:
+		case THERM_IPQ_0518:
+			msg("==== IPQ50xx ====\n");
+			def_sensor_setting = &def_mp_setting;
+			break;
 		default:
 			msg("==== DEFAULT ===\n");
 			def_sensor_setting = &def_hk_setting;
@@ -851,6 +899,13 @@ int parse_config(thermal_setting_t *settings, int fd)
 				|| settings->soc_id == THERM_IPQ_6000
 				|| settings->soc_id == THERM_IPQ_6010)
 				i = TSENS_TZ_SENSOR4;
+			else if ( settings->soc_id == THERM_IPQ_5010
+				|| settings->soc_id == THERM_IPQ_5018
+				|| settings->soc_id == THERM_IPQ_5028
+				|| settings->soc_id == THERM_IPQ_5000
+				|| settings->soc_id == THERM_IPQ_0509
+				|| settings->soc_id == THERM_IPQ_0518)
+				i = TSENS_TZ_SENSOR1;
 			else
 				i = TSENS_TZ_SENSOR0;
 

feeds/ipq807x/qca-thermald-10.4/src/thermal_monitor.c

@@ -73,6 +73,11 @@ static void clear_all_alarms(sensor_setting_t *sensor, int sensor_temp)
 		case NSS_FREQ:
                         nssfreq_request(-1);
                         break;
+#ifdef IPQ_5000
+		case COOLING:
+			cooling_request(sensor->id, sensor_temp, 0);
+			break;
+#endif
 #endif
 		}
 	}
@@ -186,6 +191,11 @@ void *sensor_monitor(void *vsensor)
 				case NSS_FREQ:
                                         nssfreq_request(sensor->t[i].actions[j].info);
                                         break;
+#ifdef IPQ_5000
+				case COOLING:
+                                        cooling_request(sensor->id, sensor_temp, sensor->t[i].actions[j].info);
+                                        break;
+#endif
 #else
 				case REPORT:
                                         if (alarm_raised)

feeds/ipq807x/qca-thermald-10.4/src/thermal_util.c

@@ -93,6 +93,14 @@ static therm_msm_soc_type msm_soc_table[] = {
 	{THERM_IPQ_6028,   403},
 	{THERM_IPQ_6000,   421},
 	{THERM_IPQ_6010,   422},
+	{THERM_IPQ_6005,   453},
+	/* MP variants */
+	{THERM_IPQ_5010,   446},
+	{THERM_IPQ_5018,   447},
+	{THERM_IPQ_5028,   448},
+	{THERM_IPQ_5000,   503},
+	{THERM_IPQ_0509,   504},
+	{THERM_IPQ_0518,   505},
 };
 
 int read_id_from_binary_file(char *path, size_t size) {

feeds/ipq807x_v5.4/ath11k-firmware/files/IPQ5018_spruce/m3_fw.flist

@@ -1,3 +1,3 @@
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/m3_fw.b00
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/m3_fw.b01
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/m3_fw.b02
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/m3_fw.b00
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/m3_fw.b01
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/m3_fw.b02

feeds/ipq807x_v5.4/ath11k-firmware/files/IPQ5018_spruce/q6_fw.flist

@@ -1,19 +1,23 @@
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b00
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b01
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b02
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b03
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b04
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b05
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b07
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b08
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b09
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b10
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b11
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b13
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b14
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b15
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b16
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b17
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b18
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b20
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/q6_fw.b21
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b00
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b01
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b02
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b03
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b04
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b05
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b07
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b08
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b09
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b10
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b11
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b13
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b14
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b15
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b16
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b17
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b18
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b20
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b21
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b22
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b23
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b25
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/q6_fw.b26

feeds/ipq807x_v5.4/ath11k-firmware/files/QCN6122/m3_fw.flist

@@ -1,3 +1,3 @@
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/qcn6122/m3_fw.b00
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/qcn6122/m3_fw.b01
-build/ms/bin/5018.wlanfw2.map_spruce_eval/PIL_IMAGES/qcn6122/m3_fw.b02
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/qcn6122/m3_fw.b00
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/qcn6122/m3_fw.b01
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/qcn6122/m3_fw.b02

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -24,8 +24,6 @@ endef
 #
 
 ALLWIFIBOARDS:= \
-	cig-wf188 \
-	cig-wf188n \
 	cig-wf660a \
 	cig-wf194c \
 	cig-wf194c4 \
@@ -127,6 +125,21 @@ $(call Package/ath11k-wifi-default)
     TITLE:=meshpp-s618 bdf
 endef
 
+define Package/ath11k-wifi-edgecore-oap101
+$(call Package/ath11k-wifi-default)
+    TITLE:=edgecore oap101 bdf
+endef
+
+define Package/ath11k-wifi-cig-wf188n-ca
+$(call Package/ath11k-wifi-default)
+    TITLE:=cig-wf188n bdf CA
+endef
+
+define Package/ath11k-wifi-cig-wf188n-us
+$(call Package/ath11k-wifi-default)
+    TITLE:=cig-wf188n bdf US
+endef
+
 define ath11k-wifi-install-one-to
   $(INSTALL_DIR)  $(2)/lib/firmware/$(3)/
   $(INSTALL_DATA) $(1) $(2)/lib/firmware/$(3)/board.bin
@@ -248,8 +261,25 @@ define Package/ath11k-wifi-hfcl-ion4xi/install
 	$(INSTALL_DATA) ./board-hfcl-ion4xi.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
 endef
 
-$(eval $(call generate-ath11k-wifi-package,cig-wf188,Cigtech WF188))
-$(eval $(call generate-ath11k-wifi-package,cig-wf188n,Cigtech WF188n))
+define Package/ath11k-wifi-edgecore-oap101/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
+	$(INSTALL_DATA) ./board-edgecore-oap101.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
+	$(INSTALL_DATA) ./board-2-edgecore-oap101.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board-2.bin
+endef
+
+define Package/ath11k-wifi-cig-wf188n-ca/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/
+	$(INSTALL_DATA) ./board-cig-wf188n-ca.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board.bin
+	echo -n 'CA MY DE' > $(1)/lib/firmware/country
+endef
+
+define Package/ath11k-wifi-cig-wf188n-us/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/
+	$(INSTALL_DATA) ./board-cig-wf188n-us.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board.bin
+	echo -n 'US MY DE' > $(1)/lib/firmware/country
+endef
+
 $(eval $(call generate-ath11k-wifi-package,cig-wf660a,Cigtech WF660a))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
@@ -283,3 +313,6 @@ $(eval $(call BuildPackage,ath11k-wifi-cig-wf196_6g-ca))
 $(eval $(call BuildPackage,ath11k-wifi-cig-wf196_6g-us))
 $(eval $(call BuildPackage,ath11k-wifi-motorola-q14))
 $(eval $(call BuildPackage,ath11k-wifi-hfcl-ion4xi))
+$(eval $(call BuildPackage,ath11k-wifi-edgecore-oap101))
+$(eval $(call BuildPackage,ath11k-wifi-cig-wf188n-ca))
+$(eval $(call BuildPackage,ath11k-wifi-cig-wf188n-us))

feeds/ipq807x_v5.4/hostapd/Makefile

@@ -84,6 +84,8 @@ ifneq ($(CONFIG_DRIVER_11AX_SUPPORT),)
   HOSTAPD_IEEE80211AX:=y
 endif
 
+CORE_DEPENDS = +libubus +libucode +ucode-mod-fs +ucode-mod-nl80211 +ucode-mod-ubus +ucode-mod-uloop +libblobmsg-json
+
 DRIVER_MAKEOPTS= \
 	CONFIG_ACS=$(CONFIG_PACKAGE_kmod-cfg80211) \
 	CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-cfg80211) \
@@ -91,6 +93,7 @@ DRIVER_MAKEOPTS= \
 	CONFIG_IEEE80211AC=$(HOSTAPD_IEEE80211AC) \
 	CONFIG_IEEE80211AX=$(HOSTAPD_IEEE80211AX) \
 	CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \
+	CONFIG_UCODE=y
 
 ifeq ($(SSL_VARIANT),openssl)
   DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_SAE=y
@@ -142,7 +145,7 @@ define Package/hostapd/Default
   SUBMENU:=WirelessAPD
   TITLE:=IEEE 802.1x Authenticator
   URL:=http://hostap.epitest.fi/
-  DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
+  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
   USERID:=network=101:network=101
   PROVIDES:=hostapd
   CONFLICTS:=$(HOSTAPD_PROVIDERS)
@@ -226,7 +229,7 @@ define Package/wpad/Default
   CATEGORY:=Network
   SUBMENU:=WirelessAPD
   TITLE:=IEEE 802.1x Auth/Supplicant
-  DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
+  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
   USERID:=network=101:network=101
   URL:=http://hostap.epitest.fi/
   PROVIDES:=hostapd wpa-supplicant
@@ -341,7 +344,7 @@ define Package/wpa-supplicant/Default
   SUBMENU:=WirelessAPD
   TITLE:=WPA Supplicant
   URL:=http://hostap.epitest.fi/wpa_supplicant/
-  DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
+  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
   USERID:=network=101:network=101
   PROVIDES:=wpa-supplicant
   CONFLICTS:=$(SUPPLICANT_PROVIDERS)
@@ -446,7 +449,7 @@ define Package/eapol-test/Default
   SECTION:=net
   SUBMENU:=WirelessAPD
   CATEGORY:=Network
-  DEPENDS:=$(DRV_DEPENDS) +libubus
+  DEPENDS:=$(DRV_DEPENDS) $(CORE_DEPENDS)
 endef
 
 define Package/eapol-test
@@ -503,7 +506,7 @@ TARGET_CPPFLAGS := \
 	$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
 
 TARGET_CFLAGS += -ffunction-sections -fdata-sections -flto
-TARGET_LDFLAGS += -Wl,--gc-sections -flto=jobserver -fuse-linker-plugin -lubox -lubus
+TARGET_LDFLAGS += -Wl,--gc-sections -flto=jobserver -fuse-linker-plugin -lubox -lubus -lucode
 
 ifdef CONFIG_PACKAGE_kmod-cfg80211
   TARGET_LDFLAGS += -lm -lnl-tiny
@@ -587,20 +590,24 @@ define Build/Compile
 endef
 
 define Install/hostapd
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
+	$(INSTALL_DATA) ./files/hostapd.uc $(1)/usr/share/hostap/
 endef
 
 define Install/supplicant
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
+	$(INSTALL_DATA) ./files/wpa_supplicant.uc $(1)/usr/share/hostap/
 endef
 
 define Package/hostapd-common/install
-	$(INSTALL_DIR) $(1)/etc/capabilities $(1)/etc/rc.button $(1)/etc/hotplug.d/ieee80211 $(1)/etc/init.d $(1)/lib/netifd  $(1)/usr/share/acl.d
+	$(INSTALL_DIR) $(1)/etc/capabilities $(1)/etc/rc.button $(1)/etc/hotplug.d/ieee80211 $(1)/etc/init.d $(1)/lib/netifd  $(1)/usr/share/acl.d $(1)/usr/share/hostap
 	$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/netifd/hostapd.sh
 	$(INSTALL_BIN) ./files/wpad.init $(1)/etc/init.d/wpad
 	$(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps
 	$(INSTALL_DATA) ./files/wpad_acl.json $(1)/usr/share/acl.d
 	$(INSTALL_DATA) ./files/wpad.json $(1)/etc/capabilities
+	$(INSTALL_DATA) ./files/common.uc $(1)/usr/share/hostap/
+	$(INSTALL_DATA) ./files/wdev.uc $(1)/usr/share/hostap/
 endef
 
 define Package/hostapd/install

feeds/ipq807x_v5.4/hostapd/files/common.uc

@@ -0,0 +1,318 @@
+import * as nl80211 from "nl80211";
+import * as rtnl from "rtnl";
+import { readfile, glob, basename, readlink } from "fs";
+
+const iftypes = {
+	ap: nl80211.const.NL80211_IFTYPE_AP,
+	mesh: nl80211.const.NL80211_IFTYPE_MESH_POINT,
+	sta: nl80211.const.NL80211_IFTYPE_STATION,
+	adhoc: nl80211.const.NL80211_IFTYPE_ADHOC,
+	monitor: nl80211.const.NL80211_IFTYPE_MONITOR,
+};
+
+function wdev_remove(name)
+{
+	nl80211.request(nl80211.const.NL80211_CMD_DEL_INTERFACE, 0, { dev: name });
+}
+
+function __phy_is_fullmac(phyidx)
+{
+	let data = nl80211.request(nl80211.const.NL80211_CMD_GET_WIPHY, 0, { wiphy: phyidx });
+
+	return !data.software_iftypes.ap_vlan;
+}
+
+function phy_is_fullmac(phy)
+{
+	let phyidx = int(trim(readfile(`/sys/class/ieee80211/${phy}/index`)));
+
+	return __phy_is_fullmac(phyidx);
+}
+
+function find_reusable_wdev(phyidx)
+{
+	if (!__phy_is_fullmac(phyidx))
+		return null;
+
+	let data = nl80211.request(
+		nl80211.const.NL80211_CMD_GET_INTERFACE,
+		nl80211.const.NLM_F_DUMP,
+		{ wiphy: phyidx });
+	for (let res in data)
+		if (trim(readfile(`/sys/class/net/${res.ifname}/operstate`)) == "down")
+			return res.ifname;
+	return null;
+}
+
+function wdev_create(phy, name, data)
+{
+	let phyidx = int(readfile(`/sys/class/ieee80211/${phy}/index`));
+
+	wdev_remove(name);
+
+	if (!iftypes[data.mode])
+		return `Invalid mode: ${data.mode}`;
+
+	let req = {
+		wiphy: phyidx,
+		ifname: name,
+		iftype: iftypes[data.mode],
+	};
+
+	if (data["4addr"])
+		req["4addr"] = data["4addr"];
+	if (data.macaddr)
+		req.mac = data.macaddr;
+
+	nl80211.error();
+
+	let reuse_ifname = find_reusable_wdev(phyidx);
+	if (reuse_ifname &&
+	    (reuse_ifname == name ||
+	     rtnl.request(rtnl.const.RTM_SETLINK, 0, { dev: reuse_ifname, ifname: name}) != false))
+		nl80211.request(
+			nl80211.const.NL80211_CMD_SET_INTERFACE, 0, {
+				wiphy: phyidx,
+				dev: name,
+				iftype: iftypes[data.mode],
+			});
+	else
+		nl80211.request(
+			nl80211.const.NL80211_CMD_NEW_INTERFACE,
+			nl80211.const.NLM_F_CREATE,
+			req);
+
+	let error = nl80211.error();
+	if (error)
+		return error;
+
+	if (data.powersave != null) {
+		nl80211.request(nl80211.const.NL80211_CMD_SET_POWER_SAVE, 0,
+			{ dev: name, ps_state: data.powersave ? 1 : 0});
+	}
+
+	return null;
+}
+
+function phy_sysfs_file(phy, name)
+{
+	return trim(readfile(`/sys/class/ieee80211/${phy}/${name}`));
+}
+
+function macaddr_split(str)
+{
+	return map(split(str, ":"), (val) => hex(val));
+}
+
+function macaddr_join(addr)
+{
+	return join(":", map(addr, (val) => sprintf("%02x", val)));
+}
+
+function wdev_macaddr(wdev)
+{
+	return trim(readfile(`/sys/class/net/${wdev}/address`));
+}
+
+const phy_proto = {
+	macaddr_init: function(used, options) {
+		this.macaddr_options = options ?? {};
+		this.macaddr_list = {};
+
+		if (type(used) == "object")
+			for (let addr in used)
+				this.macaddr_list[addr] = used[addr];
+		else
+			for (let addr in used)
+				this.macaddr_list[addr] = -1;
+
+		this.for_each_wdev((wdev) => {
+			let macaddr = wdev_macaddr(wdev);
+			this.macaddr_list[macaddr] ??= -1;
+		});
+
+		return this.macaddr_list;
+	},
+
+	macaddr_generate: function(data) {
+		let phy = this.name;
+		let idx = int(data.id ?? 0);
+		let mbssid = int(data.mbssid ?? 0) > 0;
+		let num_global = int(data.num_global ?? 1);
+		let use_global = !mbssid && idx < num_global;
+
+		let base_addr = phy_sysfs_file(phy, "macaddress");
+		if (!base_addr)
+			return null;
+
+		if (!idx && !mbssid)
+			return base_addr;
+
+		let base_mask = phy_sysfs_file(phy, "address_mask");
+		if (!base_mask)
+			return null;
+
+		if (base_mask == "00:00:00:00:00:00" && idx >= num_global) {
+			let addrs = split(phy_sysfs_file(phy, "addresses"), "\n");
+
+			if (idx < length(addrs))
+				return addrs[idx];
+
+			base_mask = "ff:ff:ff:ff:ff:ff";
+		}
+
+		let addr = macaddr_split(base_addr);
+		let mask = macaddr_split(base_mask);
+		let type;
+
+		if (mbssid)
+			type = "b5";
+		else if (use_global)
+			type = "add";
+		else if (mask[0] > 0)
+			type = "b1";
+		else if (mask[5] < 0xff)
+			type = "b5";
+		else
+			type = "add";
+
+		switch (type) {
+		case "b1":
+			if (!(addr[0] & 2))
+				idx--;
+			addr[0] |= 2;
+			addr[0] ^= idx << 2;
+			break;
+		case "b5":
+			if (mbssid)
+				addr[0] |= 2;
+			addr[5] ^= idx;
+			break;
+		default:
+			for (let i = 5; i > 0; i--) {
+				addr[i] += idx;
+				if (addr[i] < 256)
+					break;
+				addr[i] %= 256;
+			}
+			break;
+		}
+
+		return macaddr_join(addr);
+	},
+
+	macaddr_next: function(val) {
+		let data = this.macaddr_options ?? {};
+		let list = this.macaddr_list;
+
+		for (let i = 0; i < 32; i++) {
+			data.id = i;
+
+			let mac = this.macaddr_generate(data);
+			if (!mac)
+				return null;
+
+			if (list[mac] != null)
+				continue;
+
+			list[mac] = val != null ? val : -1;
+			return mac;
+		}
+	},
+
+	for_each_wdev: function(cb) {
+		let wdevs = glob(`/sys/class/ieee80211/${this.name}/device/net/*`);
+		wdevs = map(wdevs, (arg) => basename(arg));
+		for (let wdev in wdevs) {
+			if (basename(readlink(`/sys/class/net/${wdev}/phy80211`)) != this.name)
+				continue;
+
+			cb(wdev);
+		}
+	}
+};
+
+function phy_open(phy)
+{
+	let phyidx = readfile(`/sys/class/ieee80211/${phy}/index`);
+	if (!phyidx)
+		return null;
+
+	return proto({
+		name: phy,
+		idx: int(phyidx)
+	}, phy_proto);
+}
+
+const vlist_proto = {
+	update: function(values, arg) {
+		let data = this.data;
+		let cb = this.cb;
+		let seq = { };
+		let new_data = {};
+		let old_data = {};
+
+		this.data = new_data;
+
+		if (type(values) == "object") {
+			for (let key in values) {
+				old_data[key] = data[key];
+				new_data[key] = values[key];
+				delete data[key];
+			}
+		} else {
+			for (let val in values) {
+				let cur_key = val[0];
+				let cur_obj = val[1];
+
+				old_data[cur_key] = data[cur_key];
+				new_data[cur_key] = val[1];
+				delete data[cur_key];
+			}
+		}
+
+		for (let key in data) {
+			cb(null, data[key], arg);
+			delete data[key];
+		}
+		for (let key in new_data)
+			cb(new_data[key], old_data[key], arg);
+	}
+};
+
+function is_equal(val1, val2) {
+	let t1 = type(val1);
+
+	if (t1 != type(val2))
+		return false;
+
+	if (t1 == "array") {
+		if (length(val1) != length(val2))
+			return false;
+
+		for (let i = 0; i < length(val1); i++)
+			if (!is_equal(val1[i], val2[i]))
+				return false;
+
+		return true;
+	} else if (t1 == "object") {
+		for (let key in val1)
+			if (!is_equal(val1[key], val2[key]))
+				return false;
+		for (let key in val2)
+			if (val1[key] == null)
+				return false;
+		return true;
+	} else {
+		return val1 == val2;
+	}
+}
+
+function vlist_new(cb) {
+	return proto({
+			cb: cb,
+			data: {}
+		}, vlist_proto);
+}
+
+export { wdev_remove, wdev_create, is_equal, vlist_new, phy_is_fullmac, phy_open };

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -725,8 +725,7 @@ hostapd_set_bss_options() {
 		[ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
 	}
 
-	set_default nasid "${macaddr//\:}"
-	append bss_conf "nas_identifier=$nasid" "$N"
+	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 
 	[ -n "$acct_server" ] && {
 		append bss_conf "acct_server_addr=$acct_server" "$N"
@@ -772,9 +771,9 @@ hostapd_set_bss_options() {
 			# Here we make the assumption that if we're in open mode
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
+			vlan_possible=1
 			[ "$macfilter" = radius ] && {
 				append_radius_server
-				vlan_possible=1
 			}
 		;;
 		psk|sae|psk-sae)
@@ -1203,9 +1202,6 @@ hostapd_set_bss_options() {
 		append bss_conf "$val" "$N"
 	done
 
-	bss_md5sum=$(echo $bss_conf | md5sum | cut -d" " -f1)
-	append bss_conf "config_id=$bss_md5sum" "$N"
-
 	append "$var" "$bss_conf" "$N"
 	return 0
 }

feeds/ipq807x_v5.4/hostapd/files/hostapd.uc

@@ -0,0 +1,809 @@
+let libubus = require("ubus");
+import { open, readfile } from "fs";
+import { wdev_create, wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open } from "common";
+
+let ubus = libubus.connect();
+
+hostapd.data.config = {};
+
+hostapd.data.file_fields = {
+	vlan_file: true,
+	wpa_psk_file: true,
+	accept_mac_file: true,
+	deny_mac_file: true,
+	eap_user_file: true,
+	ca_cert: true,
+	server_cert: true,
+	server_cert2: true,
+	private_key: true,
+	private_key2: true,
+	dh_file: true,
+	eap_sim_db: true,
+};
+
+function iface_remove(cfg)
+{
+	if (!cfg || !cfg.bss || !cfg.bss[0] || !cfg.bss[0].ifname)
+		return;
+
+	hostapd.remove_iface(cfg.bss[0].ifname);
+	for (let bss in cfg.bss)
+		wdev_remove(bss.ifname);
+}
+
+function iface_gen_config(phy, config, start_disabled)
+{
+	let str = `data:
+${join("\n", config.radio.data)}
+channel=${config.radio.channel}
+`;
+
+	for (let i = 0; i < length(config.bss); i++) {
+		let bss = config.bss[i];
+		let type = i > 0 ? "bss" : "interface";
+		let nasid = bss.nasid ?? replace(bss.bssid, ":", "");
+
+		str += `
+${type}=${bss.ifname}
+bssid=${bss.bssid}
+${join("\n", bss.data)}
+nas_identifier=${nasid}
+`;
+		if (start_disabled)
+			str += `
+start_disabled=1
+`;
+	}
+
+	return str;
+}
+
+function iface_freq_info(iface, config, params)
+{
+	let freq = params.frequency;
+	if (!freq)
+		return null;
+
+	let sec_offset = params.sec_chan_offset;
+	if (sec_offset != -1 && sec_offset != 1)
+		sec_offset = 0;
+
+	let width = 0;
+	for (let line in config.radio.data) {
+		if (!sec_offset && match(line, /^ht_capab=.*HT40/)) {
+			sec_offset = null; // auto-detect
+			continue;
+		}
+
+		let val = match(line, /^(vht_oper_chwidth|he_oper_chwidth)=(\d+)/);
+		if (!val)
+			continue;
+
+		val = int(val[2]);
+		if (val > width)
+			width = val;
+	}
+
+	if (freq < 4000)
+		width = 0;
+
+	return hostapd.freq_info(freq, sec_offset, width);
+}
+
+function iface_add(phy, config, phy_status)
+{
+	let config_inline = iface_gen_config(phy, config, !!phy_status);
+
+	let bss = config.bss[0];
+	let ret = hostapd.add_iface(`bss_config=${bss.ifname}:${config_inline}`);
+	if (ret < 0)
+		return false;
+
+	if (!phy_status)
+		return true;
+
+	let iface = hostapd.interfaces[bss.ifname];
+	if (!iface)
+		return false;
+
+	let freq_info = iface_freq_info(iface, config, phy_status);
+
+	return iface.start(freq_info) >= 0;
+}
+
+function iface_config_macaddr_list(config)
+{
+	let macaddr_list = {};
+	for (let i = 0; i < length(config.bss); i++) {
+		let bss = config.bss[i];
+		if (!bss.default_macaddr)
+			macaddr_list[bss.bssid] = i;
+	}
+
+	return macaddr_list;
+}
+
+function iface_restart(phydev, config, old_config)
+{
+	let phy = phydev.name;
+
+	iface_remove(old_config);
+	iface_remove(config);
+
+	if (!config.bss || !config.bss[0]) {
+		hostapd.printf(`No bss for phy ${phy}`);
+		return;
+	}
+
+	phydev.macaddr_init(iface_config_macaddr_list(config));
+	for (let i = 0; i < length(config.bss); i++) {
+		let bss = config.bss[i];
+		if (bss.default_macaddr)
+			bss.bssid = phydev.macaddr_next();
+	}
+
+	let bss = config.bss[0];
+	let err = wdev_create(phy, bss.ifname, { mode: "ap" });
+	if (err)
+		hostapd.printf(`Failed to create ${bss.ifname} on phy ${phy}: ${err}`);
+
+	let ubus = hostapd.data.ubus;
+	let phy_status = ubus.call("wpa_supplicant", "phy_status", { phy: phy });
+	if (phy_status && phy_status.state == "COMPLETED") {
+		if (iface_add(phy, config, phy_status))
+			return;
+
+		hostapd.printf(`Failed to bring up phy ${phy} ifname=${bss.ifname} with supplicant provided frequency`);
+	}
+
+	ubus.call("wpa_supplicant", "phy_set_state", { phy: phy, stop: true });
+	if (!iface_add(phy, config))
+		hostapd.printf(`hostapd.add_iface failed for phy ${phy} ifname=${bss.ifname}`);
+	ubus.call("wpa_supplicant", "phy_set_state", { phy: phy, stop: false });
+}
+
+function array_to_obj(arr, key, start)
+{
+	let obj = {};
+
+	start ??= 0;
+	for (let i = start; i < length(arr); i++) {
+		let cur = arr[i];
+		obj[cur[key]] = cur;
+	}
+
+	return obj;
+}
+
+function find_array_idx(arr, key, val)
+{
+	for (let i = 0; i < length(arr); i++)
+		if (arr[i][key] == val)
+			return i;
+
+	return -1;
+}
+
+function bss_reload_psk(bss, config, old_config)
+{
+	if (is_equal(old_config.hash.wpa_psk_file, config.hash.wpa_psk_file))
+		return;
+
+	old_config.hash.wpa_psk_file = config.hash.wpa_psk_file;
+	if (!is_equal(old_config, config))
+		return;
+
+	let ret = bss.ctrl("RELOAD_WPA_PSK");
+	ret ??= "failed";
+
+	hostapd.printf(`Reload WPA PSK file for bss ${config.ifname}: ${ret}`);
+}
+
+function remove_file_fields(config)
+{
+	return filter(config, (line) => !hostapd.data.file_fields[split(line, "=")[0]]);
+}
+
+function bss_remove_file_fields(config)
+{
+	let new_cfg = {};
+
+	for (let key in config)
+		new_cfg[key] = config[key];
+	new_cfg.data = remove_file_fields(new_cfg.data);
+	new_cfg.hash = {};
+	for (let key in config.hash)
+		new_cfg.hash[key] = config.hash[key];
+	delete new_cfg.hash.wpa_psk_file;
+	delete new_cfg.hash.vlan_file;
+
+	return new_cfg;
+}
+
+function bss_config_hash(config)
+{
+	return hostapd.sha1(remove_file_fields(config) + "");
+}
+
+function bss_find_existing(config, prev_config, prev_hash)
+{
+	let hash = bss_config_hash(config.data);
+
+	for (let i = 0; i < length(prev_config.bss); i++) {
+		if (!prev_hash[i] || hash != prev_hash[i])
+			continue;
+
+		prev_hash[i] = null;
+		return i;
+	}
+
+	return -1;
+}
+
+function get_config_bss(config, idx)
+{
+	if (!config.bss[idx]) {
+		hostapd.printf(`Invalid bss index ${idx}`);
+		return null;
+	}
+
+	let ifname = config.bss[idx].ifname;
+	if (!ifname)
+		hostapd.printf(`Could not find bss ${config.bss[idx].ifname}`);
+
+	return hostapd.bss[ifname];
+}
+
+function iface_reload_config(phydev, config, old_config)
+{
+	let phy = phydev.name;
+
+	if (!old_config || !is_equal(old_config.radio, config.radio))
+		return false;
+
+	if (is_equal(old_config.bss, config.bss))
+		return true;
+
+	if (!old_config.bss || !old_config.bss[0])
+		return false;
+
+	let iface_name = old_config.bss[0].ifname;
+	let iface = hostapd.interfaces[iface_name];
+	if (!iface) {
+		hostapd.printf(`Could not find previous interface ${iface_name}`);
+		return false;
+	}
+
+	let first_bss = hostapd.bss[iface_name];
+	if (!first_bss) {
+		hostapd.printf(`Could not find bss of previous interface ${iface_name}`);
+		return false;
+	}
+
+	let macaddr_list = iface_config_macaddr_list(config);
+	let bss_list = [];
+	let bss_list_cfg = [];
+	let prev_bss_hash = [];
+
+	for (let bss in old_config.bss) {
+		let hash = bss_config_hash(bss.data);
+		push(prev_bss_hash, bss_config_hash(bss.data));
+	}
+
+	// Step 1: find (possibly renamed) interfaces with the same config
+	// and store them in the new order (with gaps)
+	for (let i = 0; i < length(config.bss); i++) {
+		let prev;
+
+		// For fullmac devices, the first interface needs to be preserved,
+		// since it's treated as the master
+		if (!i && phy_is_fullmac(phy)) {
+			prev = 0;
+			prev_bss_hash[0] = null;
+		} else {
+			prev = bss_find_existing(config.bss[i], old_config, prev_bss_hash);
+		}
+		if (prev < 0)
+			continue;
+
+		let cur_config = config.bss[i];
+		let prev_config = old_config.bss[prev];
+
+		let prev_bss = get_config_bss(old_config, prev);
+		if (!prev_bss)
+			return false;
+
+		// try to preserve MAC address of this BSS by reassigning another
+		// BSS if necessary
+		if (cur_config.default_macaddr &&
+		    !macaddr_list[prev_config.bssid]) {
+			macaddr_list[prev_config.bssid] = i;
+			cur_config.bssid = prev_config.bssid;
+		}
+
+		bss_list[i] = prev_bss;
+		bss_list_cfg[i] = old_config.bss[prev];
+	}
+
+	if (config.mbssid && !bss_list_cfg[0]) {
+		hostapd.printf("First BSS changed with MBSSID enabled");
+		return false;
+	}
+
+	// Step 2: if none were found, rename and preserve the first one
+	if (length(bss_list) == 0) {
+		// can't change the bssid of the first bss
+		if (config.bss[0].bssid != old_config.bss[0].bssid) {
+			if (!config.bss[0].default_macaddr) {
+				hostapd.printf(`BSSID of first interface changed: ${lc(old_config.bss[0].bssid)} -> ${lc(config.bss[0].bssid)}`);
+				return false;
+			}
+
+			config.bss[0].bssid = old_config.bss[0].bssid;
+		}
+
+		let prev_bss = get_config_bss(old_config, 0);
+		if (!prev_bss)
+			return false;
+
+		macaddr_list[config.bss[0].bssid] = 0;
+		bss_list[0] = prev_bss;
+		bss_list_cfg[0] = old_config.bss[0];
+		prev_bss_hash[0] = null;
+	}
+
+	// Step 3: delete all unused old interfaces
+	for (let i = 0; i < length(prev_bss_hash); i++) {
+		if (!prev_bss_hash[i])
+			continue;
+
+		let prev_bss = get_config_bss(old_config, i);
+		if (!prev_bss)
+			return false;
+
+		let ifname = old_config.bss[i].ifname;
+		hostapd.printf(`Remove bss '${ifname}' on phy '${phy}'`);
+		prev_bss.delete();
+		wdev_remove(ifname);
+	}
+
+	// Step 4: rename preserved interfaces, use temporary name on duplicates
+	let rename_list = [];
+	for (let i = 0; i < length(bss_list); i++) {
+		if (!bss_list[i])
+			continue;
+
+		let old_ifname = bss_list_cfg[i].ifname;
+		let new_ifname = config.bss[i].ifname;
+		if (old_ifname == new_ifname)
+			continue;
+
+		if (hostapd.bss[new_ifname]) {
+			new_ifname = "tmp_" + substr(hostapd.sha1(new_ifname), 0, 8);
+			push(rename_list, i);
+		}
+
+		hostapd.printf(`Rename bss ${old_ifname} to ${new_ifname}`);
+		if (!bss_list[i].rename(new_ifname)) {
+			hostapd.printf(`Failed to rename bss ${old_ifname} to ${new_ifname}`);
+			return false;
+		}
+
+		bss_list_cfg[i].ifname = new_ifname;
+	}
+
+	// Step 5: rename interfaces with temporary names
+	for (let i in rename_list) {
+		let new_ifname = config.bss[i].ifname;
+		if (!bss_list[i].rename(new_ifname)) {
+			hostapd.printf(`Failed to rename bss to ${new_ifname}`);
+			return false;
+		}
+		bss_list_cfg[i].ifname = new_ifname;
+	}
+
+	// Step 6: assign BSSID for newly created interfaces
+	let macaddr_data = {
+		num_global: config.num_global_macaddr ?? 1,
+		mbssid: config.mbssid ?? 0,
+	};
+	macaddr_list = phydev.macaddr_init(macaddr_list, macaddr_data);
+	for (let i = 0; i < length(config.bss); i++) {
+		if (bss_list[i])
+			continue;
+		let bsscfg = config.bss[i];
+
+		let mac_idx = macaddr_list[bsscfg.bssid];
+		if (mac_idx < 0)
+			macaddr_list[bsscfg.bssid] = i;
+		if (mac_idx == i)
+			continue;
+
+		// statically assigned bssid of the new interface is in conflict
+		// with the bssid of a reused interface. reassign the reused interface
+		if (!bsscfg.default_macaddr) {
+			// can't update bssid of the first BSS, need to restart
+			if (!mac_idx < 0)
+				return false;
+
+			bsscfg = config.bss[mac_idx];
+		}
+
+		let addr = phydev.macaddr_next(i);
+		if (!addr) {
+			hostapd.printf(`Failed to generate mac address for phy ${phy}`);
+			return false;
+		}
+		bsscfg.bssid = addr;
+	}
+
+	let config_inline = iface_gen_config(phy, config);
+
+	// Step 7: fill in the gaps with new interfaces
+	for (let i = 0; i < length(config.bss); i++) {
+		let ifname = config.bss[i].ifname;
+		let bss = bss_list[i];
+
+		if (bss)
+			continue;
+
+		hostapd.printf(`Add bss ${ifname} on phy ${phy}`);
+		bss_list[i] = iface.add_bss(config_inline, i);
+		if (!bss_list[i]) {
+			hostapd.printf(`Failed to add new bss ${ifname} on phy ${phy}`);
+			return false;
+		}
+	}
+
+	// Step 8: update interface bss order
+	if (!iface.set_bss_order(bss_list)) {
+		hostapd.printf(`Failed to update BSS order on phy '${phy}'`);
+		return false;
+	}
+
+	// Step 9: update config
+	for (let i = 0; i < length(config.bss); i++) {
+		if (!bss_list_cfg[i])
+			continue;
+
+		let ifname = config.bss[i].ifname;
+		let bss = bss_list[i];
+
+		if (is_equal(config.bss[i], bss_list_cfg[i]))
+			continue;
+
+		if (is_equal(bss_remove_file_fields(config.bss[i]),
+		             bss_remove_file_fields(bss_list_cfg[i]))) {
+			hostapd.printf(`Update config data files for bss ${ifname}`);
+			if (bss.set_config(config_inline, i, true) < 0) {
+				hostapd.printf(`Could not update config data files for bss ${ifname}`);
+				return false;
+			} else {
+				bss.ctrl("RELOAD_WPA_PSK");
+				continue;
+			}
+		}
+
+		bss_reload_psk(bss, config.bss[i], bss_list_cfg[i]);
+		if (is_equal(config.bss[i], bss_list_cfg[i]))
+			continue;
+
+		hostapd.printf(`Reload config for bss '${config.bss[0].ifname}' on phy '${phy}'`);
+		if (bss.set_config(config_inline, i) < 0) {
+			hostapd.printf(`Failed to set config for bss ${ifname}`);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+function iface_update_supplicant_macaddr(phy, config)
+{
+	let macaddr_list = [];
+	for (let i = 0; i < length(config.bss); i++)
+		push(macaddr_list, config.bss[i].bssid);
+	ubus.call("wpa_supplicant", "phy_set_macaddr_list", { phy: phy, macaddr: macaddr_list });
+}
+
+function iface_set_config(phy, config)
+{
+	let old_config = hostapd.data.config[phy];
+
+	hostapd.data.config[phy] = config;
+
+	if (!config)
+		return iface_remove(old_config);
+
+	let phydev = phy_open(phy);
+	if (!phydev) {
+		hostapd.printf(`Failed to open phy ${phy}`);
+		return false;
+	}
+
+	try {
+		let ret = iface_reload_config(phydev, config, old_config);
+		if (ret) {
+			iface_update_supplicant_macaddr(phy, config);
+			hostapd.printf(`Reloaded settings for phy ${phy}`);
+			return 0;
+		}
+	} catch (e) {
+			hostapd.printf(`Error reloading config: ${e}\n${e.stacktrace[0].context}`);
+	}
+
+	hostapd.printf(`Restart interface for phy ${phy}`);
+	let ret = iface_restart(phydev, config, old_config);
+	iface_update_supplicant_macaddr(phy, config);
+
+	return ret;
+}
+
+function config_add_bss(config, name)
+{
+	let bss = {
+		ifname: name,
+		data: [],
+		hash: {}
+	};
+
+	push(config.bss, bss);
+
+	return bss;
+}
+
+function iface_load_config(filename)
+{
+	let f = open(filename, "r");
+	if (!f)
+		return null;
+
+	let config = {
+		radio: {
+			data: []
+		},
+		bss: [],
+		orig_file: filename,
+	};
+
+	let bss;
+	let line;
+	while ((line = trim(f.read("line"))) != null) {
+		let val = split(line, "=", 2);
+		if (!val[0])
+			continue;
+
+		if (val[0] == "interface") {
+			bss = config_add_bss(config, val[1]);
+			break;
+		}
+
+		if (val[0] == "channel") {
+			config.radio.channel = val[1];
+			continue;
+		}
+
+		if (val[0] == "#num_global_macaddr" ||
+		    val[0] == "mbssid")
+			config[val[0]] = int(val[1]);
+
+		push(config.radio.data, line);
+	}
+
+	while ((line = trim(f.read("line"))) != null) {
+		if (line == "#default_macaddr")
+			bss.default_macaddr = true;
+
+		let val = split(line, "=", 2);
+		if (!val[0])
+			continue;
+
+		if (val[0] == "bssid") {
+			bss.bssid = lc(val[1]);
+			continue;
+		}
+
+		if (val[0] == "nas_identifier")
+			bss.nasid = val[1];
+
+		if (val[0] == "bss") {
+			bss = config_add_bss(config, val[1]);
+			continue;
+		}
+
+		if (hostapd.data.file_fields[val[0]])
+			bss.hash[val[0]] = hostapd.sha1(readfile(val[1]));
+
+		push(bss.data, line);
+	}
+	f.close();
+
+	return config;
+}
+
+function ex_wrap(func) {
+	return (req) => {
+		try {
+			let ret = func(req);
+			return ret;
+		} catch(e) {
+			hostapd.printf(`Exception in ubus function: ${e}\n${e.stacktrace[0].context}`);
+		}
+		return libubus.STATUS_UNKNOWN_ERROR;
+	};
+}
+
+let main_obj = {
+	reload: {
+		args: {
+			phy: "",
+		},
+		call: ex_wrap(function(req) {
+			let phy_list = req.args.phy ? [ req.args.phy ] : keys(hostapd.data.config);
+			for (let phy_name in phy_list) {
+				let phy = hostapd.data.config[phy_name];
+				let config = iface_load_config(phy.orig_file);
+				iface_set_config(phy_name, config);
+			}
+
+			return 0;
+		})
+	},
+	apsta_state: {
+		args: {
+			phy: "",
+			up: true,
+			frequency: 0,
+			sec_chan_offset: 0,
+			csa: true,
+			csa_count: 0,
+		},
+		call: ex_wrap(function(req) {
+			if (req.args.up == null || !req.args.phy)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			let phy = req.args.phy;
+			let config = hostapd.data.config[phy];
+			if (!config || !config.bss || !config.bss[0] || !config.bss[0].ifname)
+				return 0;
+
+			let iface = hostapd.interfaces[config.bss[0].ifname];
+			if (!iface)
+				return 0;
+
+			if (!req.args.up) {
+				iface.stop();
+				return 0;
+			}
+
+			if (!req.args.frequency)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			let freq_info = iface_freq_info(iface, config, req.args);
+			if (!freq_info)
+				return libubus.STATUS_UNKNOWN_ERROR;
+
+			let ret;
+			if (req.args.csa) {
+				freq_info.csa_count = req.args.csa_count ?? 10;
+				ret = iface.switch_channel(freq_info);
+			} else {
+				ret = iface.start(freq_info);
+			}
+			if (!ret)
+				return libubus.STATUS_UNKNOWN_ERROR;
+
+			return 0;
+		})
+	},
+	config_get_macaddr_list: {
+		args: {
+			phy: ""
+		},
+		call: ex_wrap(function(req) {
+			let phy = req.args.phy;
+			if (!phy)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			let ret = {
+				macaddr: [],
+			};
+
+			let config = hostapd.data.config[phy];
+			if (!config)
+				return ret;
+
+			ret.macaddr = map(config.bss, (bss) => bss.bssid);
+			return ret;
+		})
+	},
+	config_set: {
+		args: {
+			phy: "",
+			config: "",
+			prev_config: "",
+		},
+		call: ex_wrap(function(req) {
+			let phy = req.args.phy;
+			let file = req.args.config;
+			let prev_file = req.args.prev_config;
+
+			if (!phy)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			if (prev_file && !hostapd.data.config[phy]) {
+				let config = iface_load_config(prev_file);
+				if (config)
+					config.radio.data = [];
+				hostapd.data.config[phy] = config;
+			}
+
+			let config = iface_load_config(file);
+
+			hostapd.printf(`Set new config for phy ${phy}: ${file}`);
+			iface_set_config(phy, config);
+
+			return {
+				pid: hostapd.getpid()
+			};
+		})
+	},
+	config_add: {
+		args: {
+			iface: "",
+			config: "",
+		},
+		call: ex_wrap(function(req) {
+			if (!req.args.iface || !req.args.config)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			if (hostapd.add_iface(`bss_config=${req.args.iface}:${req.args.config}`) < 0)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			return {
+				pid: hostapd.getpid()
+			};
+		})
+	},
+	config_remove: {
+		args: {
+			iface: ""
+		},
+		call: ex_wrap(function(req) {
+			if (!req.args.iface)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			hostapd.remove_iface(req.args.iface);
+			return 0;
+		})
+	},
+};
+
+hostapd.data.ubus = ubus;
+hostapd.data.obj = ubus.publish("hostapd", main_obj);
+
+function bss_event(type, name, data) {
+	let ubus = hostapd.data.ubus;
+
+	data ??= {};
+	data.name = name;
+	hostapd.data.obj.notify(`bss.${type}`, data, null, null, null, -1);
+	ubus.call("service", "event", { type: `hostapd.${name}.${type}`, data: {} });
+}
+
+return {
+	shutdown: function() {
+		for (let phy in hostapd.data.config)
+			iface_set_config(phy, null);
+		hostapd.ubus.disconnect();
+	},
+	bss_add: function(name, obj) {
+		bss_event("add", name);
+	},
+	bss_reload: function(name, obj, reconf) {
+		bss_event("reload", name, { reconf: reconf != 0 });
+	},
+	bss_remove: function(name, obj) {
+		bss_event("remove", name);
+	}
+};

feeds/ipq807x_v5.4/hostapd/files/wdev.uc

@@ -0,0 +1,207 @@
+#!/usr/bin/env ucode
+'use strict';
+import { vlist_new, is_equal, wdev_create, wdev_remove, phy_open } from "/usr/share/hostap/common.uc";
+import { readfile, writefile, basename, readlink, glob } from "fs";
+let libubus = require("ubus");
+
+let keep_devices = {};
+let phy = shift(ARGV);
+let command = shift(ARGV);
+let phydev;
+
+const mesh_params = [
+	"mesh_retry_timeout", "mesh_confirm_timeout", "mesh_holding_timeout", "mesh_max_peer_links",
+	"mesh_max_retries", "mesh_ttl", "mesh_element_ttl", "mesh_hwmp_max_preq_retries",
+	"mesh_path_refresh_time", "mesh_min_discovery_timeout", "mesh_hwmp_active_path_timeout",
+	"mesh_hwmp_preq_min_interval", "mesh_hwmp_net_diameter_traversal_time", "mesh_hwmp_rootmode",
+	"mesh_hwmp_rann_interval", "mesh_gate_announcements", "mesh_sync_offset_max_neighor",
+	"mesh_rssi_threshold", "mesh_hwmp_active_path_to_root_timeout", "mesh_hwmp_root_interval",
+	"mesh_hwmp_confirmation_interval", "mesh_awake_window", "mesh_plink_timeout",
+	"mesh_auto_open_plinks", "mesh_fwding", "mesh_power_mode"
+];
+
+function iface_stop(wdev)
+{
+	if (keep_devices[wdev.ifname])
+		return;
+
+	wdev_remove(wdev.ifname);
+}
+
+function iface_start(wdev)
+{
+	let ifname = wdev.ifname;
+
+	if (readfile(`/sys/class/net/${ifname}/ifindex`)) {
+		system([ "ip", "link", "set", "dev", ifname, "down" ]);
+		wdev_remove(ifname);
+	}
+	let wdev_config = {};
+	for (let key in wdev)
+		wdev_config[key] = wdev[key];
+	if (!wdev_config.macaddr && wdev.mode != "monitor")
+		wdev_config.macaddr = phydev.macaddr_next();
+	wdev_create(phy, ifname, wdev);
+	system([ "ip", "link", "set", "dev", ifname, "up" ]);
+	if (wdev.freq)
+		system(`iw dev ${ifname} set freq ${wdev.freq} ${wdev.htmode}`);
+	if (wdev.mode == "adhoc") {
+		let cmd = ["iw", "dev", ifname, "ibss", "join", wdev.ssid, wdev.freq, wdev.htmode, "fixed-freq" ];
+		if (wdev.bssid)
+			push(cmd, wdev.bssid);
+		for (let key in [ "beacon-interval", "basic-rates", "mcast-rate", "keys" ])
+			if (wdev[key])
+				push(cmd, key, wdev[key]);
+		system(cmd);
+	} else if (wdev.mode == "mesh") {
+		let cmd = [ "iw", "dev", ifname, "mesh", "join", wdev.ssid, "freq", wdev.freq, wdev.htmode ];
+		for (let key in [ "mcast-rate", "beacon-interval" ])
+			if (wdev[key])
+				push(cmd, key, wdev[key]);
+		system(cmd);
+
+		cmd = ["iw", "dev", ifname, "set", "mesh_param" ];
+		let len = length(cmd);
+
+		for (let param in mesh_params)
+			if (wdev[param])
+				push(cmd, param, wdev[param]);
+
+		if (len == length(cmd))
+			return;
+
+		system(cmd);
+	}
+
+}
+
+function iface_cb(new_if, old_if)
+{
+	if (old_if && new_if && is_equal(old_if, new_if))
+		return;
+
+	if (old_if)
+		iface_stop(old_if);
+	if (new_if)
+		iface_start(new_if);
+}
+
+function drop_inactive(config)
+{
+	for (let key in config) {
+		if (!readfile(`/sys/class/net/${key}/ifindex`))
+			delete config[key];
+	}
+}
+
+function add_ifname(config)
+{
+	for (let key in config)
+		config[key].ifname = key;
+}
+
+function delete_ifname(config)
+{
+	for (let key in config)
+		delete config[key].ifname;
+}
+
+function add_existing(phy, config)
+{
+	let wdevs = glob(`/sys/class/ieee80211/${phy}/device/net/*`);
+	wdevs = map(wdevs, (arg) => basename(arg));
+	for (let wdev in wdevs) {
+		if (config[wdev])
+			continue;
+
+		if (basename(readlink(`/sys/class/net/${wdev}/phy80211`)) != phy)
+			continue;
+
+		if (trim(readfile(`/sys/class/net/${wdev}/operstate`)) == "down")
+			config[wdev] = {};
+	}
+}
+
+function usage()
+{
+	warn(`Usage: ${basename(sourcepath())} <phy> <command> [<arguments>]
+
+Commands:
+	set_config <config> [<device]...] - set phy configuration
+	get_macaddr <id>		  - get phy MAC address for vif index <id>
+`);
+	exit(1);
+}
+
+const commands = {
+	set_config: function(args) {
+		let statefile = `/var/run/wdev-${phy}.json`;
+
+		let new_config = shift(args);
+		for (let dev in ARGV)
+			keep_devices[dev] = true;
+
+		if (!new_config)
+			usage();
+
+		new_config = json(new_config);
+		if (!new_config) {
+			warn("Invalid configuration\n");
+			exit(1);
+		}
+
+		let old_config = readfile(statefile);
+		if (old_config)
+			old_config = json(old_config);
+
+		let config = vlist_new(iface_cb);
+		if (type(old_config) == "object")
+			config.data = old_config;
+
+		add_existing(phy, config.data);
+		add_ifname(config.data);
+		drop_inactive(config.data);
+
+		let ubus = libubus.connect();
+		let data = ubus.call("hostapd", "config_get_macaddr_list", { phy: phy });
+		let macaddr_list = [];
+		if (type(data) == "object" && data.macaddr)
+			macaddr_list = data.macaddr;
+		ubus.disconnect();
+		phydev.macaddr_init(macaddr_list);
+
+		add_ifname(new_config);
+		config.update(new_config);
+
+		drop_inactive(config.data);
+		delete_ifname(config.data);
+		writefile(statefile, sprintf("%J", config.data));
+	},
+	get_macaddr: function(args) {
+		let data = {};
+
+		for (let arg in args) {
+			arg = split(arg, "=", 2);
+			data[arg[0]] = arg[1];
+		}
+
+		let macaddr = phydev.macaddr_generate(data);
+		if (!macaddr) {
+			warn(`Could not get MAC address for phy ${phy}\n`);
+			exit(1);
+		}
+
+		print(macaddr + "\n");
+	},
+};
+
+if (!phy || !command | !commands[command])
+	usage();
+
+phydev = phy_open(phy);
+if (!phydev) {
+	warn(`PHY ${phy} does not exist\n`);
+	exit(1);
+}
+
+commands[command](ARGV);

feeds/ipq807x_v5.4/hostapd/files/wpa_supplicant.uc

@@ -0,0 +1,330 @@
+let libubus = require("ubus");
+import { open, readfile } from "fs";
+import { wdev_create, wdev_remove, is_equal, vlist_new, phy_open } from "common";
+
+let ubus = libubus.connect();
+
+wpas.data.config = {};
+wpas.data.iface_phy = {};
+wpas.data.macaddr_list = {};
+
+function iface_stop(iface)
+{
+	let ifname = iface.config.iface;
+
+	if (!iface.running)
+		return;
+
+	delete wpas.data.iface_phy[ifname];
+	wpas.remove_iface(ifname);
+	wdev_remove(ifname);
+	iface.running = false;
+}
+
+function iface_start(phydev, iface, macaddr_list)
+{
+	let phy = phydev.name;
+
+	if (iface.running)
+		return;
+
+	let ifname = iface.config.iface;
+	let wdev_config = {};
+	for (let field in iface.config)
+		wdev_config[field] = iface.config[field];
+	if (!wdev_config.macaddr)
+		wdev_config.macaddr = phydev.macaddr_next();
+
+	wpas.data.iface_phy[ifname] = phy;
+	wdev_remove(ifname);
+	let ret = wdev_create(phy, ifname, wdev_config);
+	if (ret)
+		wpas.printf(`Failed to create device ${ifname}: ${ret}`);
+	wpas.add_iface(iface.config);
+	iface.running = true;
+}
+
+function iface_cb(new_if, old_if)
+{
+	if (old_if && new_if && is_equal(old_if.config, new_if.config)) {
+		new_if.running = old_if.running;
+		return;
+	}
+
+	if (new_if && old_if)
+		wpas.printf(`Update configuration for interface ${old_if.config.iface}`);
+	else if (old_if)
+		wpas.printf(`Remove interface ${old_if.config.iface}`);
+
+	if (old_if)
+		iface_stop(old_if);
+}
+
+function prepare_config(config)
+{
+	config.config_data = readfile(config.config);
+
+	return { config: config };
+}
+
+function set_config(phy_name, config_list)
+{
+	let phy = wpas.data.config[phy_name];
+
+	if (!phy) {
+		phy = vlist_new(iface_cb, false);
+		wpas.data.config[phy_name] = phy;
+	}
+
+	let values = [];
+	for (let config in config_list)
+		push(values, [ config.iface, prepare_config(config) ]);
+
+	phy.update(values);
+}
+
+function start_pending(phy_name)
+{
+	let phy = wpas.data.config[phy_name];
+	let ubus = wpas.data.ubus;
+
+	if (!phy || !phy.data)
+		return;
+
+	let phydev = phy_open(phy_name);
+	if (!phydev) {
+		wpas.printf(`Could not open phy ${phy_name}`);
+		return;
+	}
+
+	let macaddr_list = wpas.data.macaddr_list[phy_name];
+	phydev.macaddr_init(macaddr_list);
+
+	for (let ifname in phy.data)
+		iface_start(phydev, phy.data[ifname]);
+}
+
+let main_obj = {
+	phy_set_state: {
+		args: {
+			phy: "",
+			stop: true,
+		},
+		call: function(req) {
+			if (!req.args.phy || req.args.stop == null)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			let phy = wpas.data.config[req.args.phy];
+			if (!phy)
+				return libubus.STATUS_NOT_FOUND;
+
+			try {
+				if (req.args.stop) {
+					for (let ifname in phy.data)
+						iface_stop(phy.data[ifname]);
+				} else {
+					start_pending(req.args.phy);
+				}
+			} catch (e) {
+				wpas.printf(`Error chaging state: ${e}\n${e.stacktrace[0].context}`);
+				return libubus.STATUS_INVALID_ARGUMENT;
+			}
+			return 0;
+		}
+	},
+	phy_set_macaddr_list: {
+		args: {
+			phy: "",
+			macaddr: [],
+		},
+		call: function(req) {
+			let phy = req.args.phy;
+			if (!phy)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			wpas.data.macaddr_list[phy] = req.args.macaddr;
+			return 0;
+		}
+	},
+	phy_status: {
+		args: {
+			phy: ""
+		},
+		call: function(req) {
+			if (!req.args.phy)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			let phy = wpas.data.config[req.args.phy];
+			if (!phy)
+				return libubus.STATUS_NOT_FOUND;
+
+			for (let ifname in phy.data) {
+				try {
+					let iface = wpas.interfaces[ifname];
+					if (!iface)
+						continue;
+
+					let status = iface.status();
+					if (!status)
+						continue;
+
+					if (status.state == "INTERFACE_DISABLED")
+						continue;
+
+					status.ifname = ifname;
+					return status;
+				} catch (e) {
+					continue;
+				}
+			}
+
+			return libubus.STATUS_NOT_FOUND;
+		}
+	},
+	config_set: {
+		args: {
+			phy: "",
+			config: [],
+			defer: true,
+		},
+		call: function(req) {
+			if (!req.args.phy)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			wpas.printf(`Set new config for phy ${req.args.phy}`);
+			try {
+				if (req.args.config)
+					set_config(req.args.phy, req.args.config);
+
+				if (!req.args.defer)
+					start_pending(req.args.phy);
+			} catch (e) {
+				wpas.printf(`Error loading config: ${e}\n${e.stacktrace[0].context}`);
+				return libubus.STATUS_INVALID_ARGUMENT;
+			}
+
+			return {
+				pid: wpas.getpid()
+			};
+		}
+	},
+	config_add: {
+		args: {
+			driver: "",
+			iface: "",
+			bridge: "",
+			hostapd_ctrl: "",
+			ctrl: "",
+			config: "",
+		},
+		call: function(req) {
+			if (!req.args.iface || !req.args.config)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			if (wpas.add_iface(req.args) < 0)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			return {
+				pid: wpas.getpid()
+			};
+		}
+	},
+	config_remove: {
+		args: {
+			iface: ""
+		},
+		call: function(req) {
+			if (!req.args.iface)
+				return libubus.STATUS_INVALID_ARGUMENT;
+
+			wpas.remove_iface(req.args.iface);
+			return 0;
+		}
+	},
+};
+
+wpas.data.ubus = ubus;
+wpas.data.obj = ubus.publish("wpa_supplicant", main_obj);
+
+function iface_event(type, name, data) {
+	let ubus = wpas.data.ubus;
+
+	data ??= {};
+	data.name = name;
+	wpas.data.obj.notify(`iface.${type}`, data, null, null, null, -1);
+	ubus.call("service", "event", { type: `wpa_supplicant.${name}.${type}`, data: {} });
+}
+
+function iface_hostapd_notify(phy, ifname, iface, state)
+{
+	let ubus = wpas.data.ubus;
+	let status = iface.status();
+	let msg = { phy: phy };
+
+	switch (state) {
+	case "DISCONNECTED":
+	case "AUTHENTICATING":
+	case "SCANNING":
+		msg.up = false;
+		break;
+	case "INTERFACE_DISABLED":
+	case "INACTIVE":
+		msg.up = true;
+		break;
+	case "COMPLETED":
+		msg.up = true;
+		msg.frequency = status.frequency;
+		msg.sec_chan_offset = status.sec_chan_offset;
+		break;
+	default:
+		return;
+	}
+
+	ubus.call("hostapd", "apsta_state", msg);
+}
+
+function iface_channel_switch(phy, ifname, iface, info)
+{
+	let msg = {
+		phy: phy,
+		up: true,
+		csa: true,
+		csa_count: info.csa_count ? info.csa_count - 1 : 0,
+		frequency: info.frequency,
+		sec_chan_offset: info.sec_chan_offset,
+	};
+	ubus.call("hostapd", "apsta_state", msg);
+}
+
+return {
+	shutdown: function() {
+		for (let phy in wpas.data.config)
+			set_config(phy, []);
+		wpas.ubus.disconnect();
+	},
+	iface_add: function(name, obj) {
+		iface_event("add", name);
+	},
+	iface_remove: function(name, obj) {
+		iface_event("remove", name);
+	},
+	state: function(ifname, iface, state) {
+		let phy = wpas.data.iface_phy[ifname];
+		if (!phy) {
+			wpas.printf(`no PHY for ifname ${ifname}`);
+			return;
+		}
+
+		iface_hostapd_notify(phy, ifname, iface, state);
+	},
+	event: function(ifname, iface, ev, info) {
+		let phy = wpas.data.iface_phy[ifname];
+		if (!phy) {
+			wpas.printf(`no PHY for ifname ${ifname}`);
+			return;
+		}
+
+		if (ev == "CH_SWITCH_STARTED")
+			iface_channel_switch(phy, ifname, iface, info);
+	}
+};

feeds/ipq807x_v5.4/hostapd/patches/011-mesh-use-deterministic-channel-on-channel-switch.patch

@@ -68,7 +68,7 @@ Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
  	if (!chan) {
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -9872,6 +9872,10 @@ static int nl80211_switch_channel(void *
+@@ -9797,6 +9797,10 @@ static int nl80211_switch_channel(void *
  	if (ret)
  		goto error;
  

feeds/ipq807x_v5.4/hostapd/patches/020-mesh-make-forwarding-configurable.patch

@@ -31,7 +31,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  };
  
  #define MAX_STA_COUNT 2007
-@@ -696,6 +697,7 @@ struct hostapd_bss_config {
+@@ -694,6 +695,7 @@ struct hostapd_bss_config {
  
  #define MESH_ENABLED BIT(0)
  	int mesh;
@@ -59,7 +59,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -10456,6 +10456,9 @@ static int nl80211_put_mesh_config(struc
+@@ -10381,6 +10381,9 @@ static int nl80211_put_mesh_config(struc
  	if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
  	     nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
  			params->auto_plinks)) ||

feeds/ipq807x_v5.4/hostapd/patches/021-fix-sta-add-after-previous-connection.patch

@@ -1,6 +1,6 @@
 --- a/src/ap/ieee802_11.c
 +++ b/src/ap/ieee802_11.c
-@@ -4942,6 +4942,13 @@ static int add_associated_sta(struct hos
+@@ -4810,6 +4810,13 @@ static int add_associated_sta(struct hos
  	 * drivers to accept the STA parameter configuration. Since this is
  	 * after a new FT-over-DS exchange, a new TK has been derived, so key
  	 * reinstallation is not a concern for this case.
@@ -14,7 +14,7 @@
  	 */
  	wpa_printf(MSG_DEBUG, "Add associated STA " MACSTR
  		   " (added_unassoc=%d auth_alg=%u ft_over_ds=%u reassoc=%d authorized=%d ft_tk=%d fils_tk=%d)",
-@@ -4955,7 +4962,8 @@ static int add_associated_sta(struct hos
+@@ -4823,7 +4830,8 @@ static int add_associated_sta(struct hos
  	    (!(sta->flags & WLAN_STA_AUTHORIZED) ||
  	     (reassoc && sta->ft_over_ds && sta->auth_alg == WLAN_AUTH_FT) ||
  	     (!wpa_auth_sta_ft_tk_already_set(sta->wpa_sm) &&

feeds/ipq807x_v5.4/hostapd/patches/022-hostapd-fix-use-of-uninitialized-stack-variables.patch

@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
-@@ -3431,7 +3431,7 @@ static int hostapd_change_config_freq(st
+@@ -3403,7 +3403,7 @@ static int hostapd_change_config_freq(st
  				      struct hostapd_freq_params *old_params)
  {
  	int channel;

feeds/ipq807x_v5.4/hostapd/patches/030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch

@@ -20,7 +20,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #include <linux/rtnetlink.h>
  #include <netpacket/packet.h>
  #include <linux/errqueue.h>
-@@ -5284,26 +5281,29 @@ fail:
+@@ -5233,26 +5230,29 @@ fail:
  
  static void rtnl_neigh_delete_fdb_entry(struct i802_bss *bss, const u8 *addr)
  {
@@ -64,7 +64,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (err < 0) {
  		wpa_printf(MSG_DEBUG, "nl80211: bridge FDB entry delete for "
  			   MACSTR " ifindex=%d failed: %s", MAC2STR(addr),
-@@ -5313,9 +5313,8 @@ static void rtnl_neigh_delete_fdb_entry(
+@@ -5262,9 +5262,8 @@ static void rtnl_neigh_delete_fdb_entry(
  			   MACSTR, MAC2STR(addr));
  	}
  
@@ -76,7 +76,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  }
  
  
-@@ -7691,7 +7690,6 @@ static void *i802_init(struct hostapd_da
+@@ -7633,7 +7632,6 @@ static void *i802_init(struct hostapd_da
  	    (params->num_bridge == 0 || !params->bridge[0]))
  		add_ifidx(drv, br_ifindex, drv->ifindex);
  
@@ -84,7 +84,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (bss->added_if_into_bridge || bss->already_in_bridge) {
  		int err;
  
-@@ -7708,7 +7706,6 @@ static void *i802_init(struct hostapd_da
+@@ -7650,7 +7648,6 @@ static void *i802_init(struct hostapd_da
  			goto failed;
  		}
  	}
@@ -92,7 +92,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  	if (drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) {
  		wpa_printf(MSG_DEBUG,
-@@ -10655,13 +10652,14 @@ static int wpa_driver_br_add_ip_neigh(vo
+@@ -10581,13 +10578,14 @@ static int wpa_driver_br_add_ip_neigh(vo
  				      const u8 *ipaddr, int prefixlen,
  				      const u8 *addr)
  {
@@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	int res;
  
  	if (!ipaddr || prefixlen == 0 || !addr)
-@@ -10680,85 +10678,66 @@ static int wpa_driver_br_add_ip_neigh(vo
+@@ -10606,85 +10604,66 @@ static int wpa_driver_br_add_ip_neigh(vo
  	}
  
  	if (version == 4) {
@@ -220,7 +220,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		addrsize = 16;
  	} else {
  		return -EINVAL;
-@@ -10776,41 +10755,30 @@ static int wpa_driver_br_delete_ip_neigh
+@@ -10702,41 +10681,30 @@ static int wpa_driver_br_delete_ip_neigh
  		return -1;
  	}
  

feeds/ipq807x_v5.4/hostapd/patches/040-nl80211-Add-frequency-info-in-start-AP-command.patch

@@ -0,0 +1,43 @@
+From: Harshitha Prem <quic_hprem@quicinc.com>
+Date: Wed, 22 Feb 2023 09:29:01 +0530
+Subject: [PATCH] nl80211: Add frequency info in start AP command
+
+When ACS is configured in multiple BSS case, sometimes a virtual AP
+interface does not come up as the channel context information between
+different BSSs of the same band does not match.
+
+Same behavior is observed in case of multiple band/hardware under a
+single wiphy, when we bring up multiple virtual interface in various
+bands simultaneously and the kernel maps a random channel as it has more
+than one channel context, e.g., say a 2.4 GHz channel to a 5 GHz virtual
+AP interface when the start AP command is sent. This is because the
+frequency information is not present in the command.
+
+Add the frequency information into the start AP netlink command so that
+the kernel maps the appropriate channel context by parsing it instead of
+using a previous set channel information.
+
+Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
+---
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -167,6 +167,8 @@ static int nl80211_send_frame_cmd(struct
+ 				  const u16 *csa_offs, size_t csa_offs_len);
+ static int wpa_driver_nl80211_probe_req_report(struct i802_bss *bss,
+ 					       int report);
++static int nl80211_put_freq_params(struct nl_msg *msg,
++				   const struct hostapd_freq_params *freq);
+ 
+ #define IFIDX_ANY -1
+ 
+@@ -4717,6 +4719,9 @@ static int wpa_driver_nl80211_set_ap(voi
+ 		nla_nest_end(msg, spr);
+ 	}
+ 
++	if (params->freq && nl80211_put_freq_params(msg, params->freq) < 0)
++		goto fail;
++
+ 	if (params->freq && params->freq->he_enabled) {
+ 		struct nlattr *bss_color;
+ 

feeds/ipq807x_v5.4/hostapd/patches/041-driver_nl80211-fix-setting-QoS-map-on-secondary-BSSs.patch

@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 14 Sep 2023 10:53:50 +0200
+Subject: [PATCH] driver_nl80211: fix setting QoS map on secondary BSSs
+
+The setting is per-BSS, not per PHY
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -10045,7 +10045,7 @@ static int nl80211_set_qos_map(void *pri
+ 	wpa_hexdump(MSG_DEBUG, "nl80211: Setting QoS Map",
+ 		    qos_map_set, qos_map_set_len);
+ 
+-	if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_SET_QOS_MAP)) ||
++	if (!(msg = nl80211_bss_msg(bss, 0, NL80211_CMD_SET_QOS_MAP)) ||
+ 	    nla_put(msg, NL80211_ATTR_QOS_MAP, qos_map_set_len, qos_map_set)) {
+ 		nlmsg_free(msg);
+ 		return -ENOBUFS;

feeds/ipq807x_v5.4/hostapd/patches/042-driver_nl80211-update-drv-ifindex-on-removing-the-fi.patch

@@ -0,0 +1,18 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 14 Sep 2023 11:28:03 +0200
+Subject: [PATCH] driver_nl80211: update drv->ifindex on removing the first
+ BSS
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -8003,6 +8003,7 @@ static int wpa_driver_nl80211_if_remove(
+ 		if (drv->first_bss->next) {
+ 			drv->first_bss = drv->first_bss->next;
+ 			drv->ctx = drv->first_bss->ctx;
++			drv->ifindex = drv->first_bss->ifindex;
+ 			os_free(bss);
+ 		} else {
+ 			wpa_printf(MSG_DEBUG, "nl80211: No second BSS to reassign context to");

feeds/ipq807x_v5.4/hostapd/patches/200-multicall.patch

@@ -72,7 +72,7 @@
  include ../src/build.rules
  
  ifdef LIBS
-@@ -359,7 +360,9 @@ endif
+@@ -354,7 +355,9 @@ endif
  ifdef CONFIG_IBSS_RSN
  NEED_RSN_AUTHENTICATOR=y
  CFLAGS += -DCONFIG_IBSS_RSN
@@ -82,7 +82,7 @@
  OBJS += ibss_rsn.o
  endif
  
-@@ -897,6 +900,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
+@@ -886,6 +889,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
  CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
  LIBS += -ldl -rdynamic
  endif
@@ -93,7 +93,7 @@
  endif
  
  ifdef CONFIG_AP
-@@ -904,9 +911,11 @@ NEED_EAP_COMMON=y
+@@ -893,9 +900,11 @@ NEED_EAP_COMMON=y
  NEED_RSN_AUTHENTICATOR=y
  CFLAGS += -DCONFIG_AP
  OBJS += ap.o
@@ -105,7 +105,7 @@
  OBJS += ../src/ap/hostapd.o
  OBJS += ../src/ap/wpa_auth_glue.o
  OBJS += ../src/ap/utils.o
-@@ -986,6 +995,12 @@ endif
+@@ -975,6 +984,12 @@ endif
  ifdef CONFIG_HS20
  OBJS += ../src/ap/hs20.o
  endif
@@ -118,7 +118,7 @@
  endif
  
  ifdef CONFIG_MBO
-@@ -994,7 +1009,9 @@ CFLAGS += -DCONFIG_MBO
+@@ -983,7 +998,9 @@ CFLAGS += -DCONFIG_MBO
  endif
  
  ifdef NEED_RSN_AUTHENTICATOR
@@ -128,7 +128,7 @@
  NEED_AES_WRAP=y
  OBJS += ../src/ap/wpa_auth.o
  OBJS += ../src/ap/wpa_auth_ie.o
-@@ -1889,6 +1906,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
+@@ -1878,6 +1895,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
  
  _OBJS_VAR := OBJS
  include ../src/objs.mk
@@ -141,7 +141,7 @@
  wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
  	$(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
  	@$(E) "  LD " $@
-@@ -2021,6 +2044,12 @@ eap_gpsk.so: $(SRC_EAP_GPSK)
+@@ -1983,6 +2006,12 @@ eap_eke.so: ../src/eap_peer/eap_eke.c ..
  	$(Q)sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@
  	@$(E) "  sed" $<
  
@@ -156,7 +156,7 @@
  wpa_cli.exe: wpa_cli
 --- a/src/drivers/driver.h
 +++ b/src/drivers/driver.h
-@@ -6025,8 +6025,8 @@ union wpa_event_data {
+@@ -6018,8 +6018,8 @@ union wpa_event_data {
   * Driver wrapper code should call this function whenever an event is received
   * from the driver.
   */
@@ -167,7 +167,7 @@
  
  /**
   * wpa_supplicant_event_global - Report a driver event for wpa_supplicant
-@@ -6038,7 +6038,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -6031,7 +6031,7 @@ void wpa_supplicant_event(void *ctx, enu
   * Same as wpa_supplicant_event(), but we search for the interface in
   * wpa_global.
   */
@@ -178,7 +178,7 @@
  /*
 --- a/src/ap/drv_callbacks.c
 +++ b/src/ap/drv_callbacks.c
-@@ -1836,8 +1836,8 @@ err:
+@@ -1827,8 +1827,8 @@ err:
  #endif /* CONFIG_OWE */
  
  
@@ -189,7 +189,7 @@
  {
  	struct hostapd_data *hapd = ctx;
  #ifndef CONFIG_NO_STDOUT_DEBUG
-@@ -2082,7 +2082,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -2073,7 +2073,7 @@ void wpa_supplicant_event(void *ctx, enu
  }
  
  
@@ -231,7 +231,7 @@
  	os_memset(&global, 0, sizeof(global));
 --- a/wpa_supplicant/events.c
 +++ b/wpa_supplicant/events.c
-@@ -4665,8 +4665,8 @@ static void wpas_event_unprot_beacon(str
+@@ -4666,8 +4666,8 @@ static void wpas_event_unprot_beacon(str
  }
  
  
@@ -242,7 +242,7 @@
  {
  	struct wpa_supplicant *wpa_s = ctx;
  	int resched;
-@@ -5511,7 +5511,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -5512,7 +5512,7 @@ void wpa_supplicant_event(void *ctx, enu
  }
  
  
@@ -253,7 +253,7 @@
  	struct wpa_supplicant *wpa_s;
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -6819,7 +6819,6 @@ struct wpa_interface * wpa_supplicant_ma
+@@ -6814,7 +6814,6 @@ struct wpa_interface * wpa_supplicant_ma
  	return NULL;
  }
  
@@ -261,7 +261,7 @@
  /**
   * wpa_supplicant_match_existing - Match existing interfaces
   * @global: Pointer to global data from wpa_supplicant_init()
-@@ -6854,6 +6853,11 @@ static int wpa_supplicant_match_existing
+@@ -6849,6 +6848,11 @@ static int wpa_supplicant_match_existing
  
  #endif /* CONFIG_MATCH_IFACE */
  
@@ -273,7 +273,7 @@
  
  /**
   * wpa_supplicant_add_iface - Add a new network interface
-@@ -7110,6 +7114,8 @@ struct wpa_global * wpa_supplicant_init(
+@@ -7105,6 +7109,8 @@ struct wpa_global * wpa_supplicant_init(
  #ifndef CONFIG_NO_WPA_MSG
  	wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb);
  #endif /* CONFIG_NO_WPA_MSG */
@@ -333,7 +333,7 @@
  
  const struct wpa_driver_ops *const wpa_drivers[] = { NULL };
  
-@@ -1291,6 +1296,10 @@ static void usage(void)
+@@ -1292,6 +1297,10 @@ static void usage(void)
  	       "option several times.\n");
  }
  
@@ -344,7 +344,7 @@
  
  int main(int argc, char *argv[])
  {
-@@ -1311,6 +1320,8 @@ int main(int argc, char *argv[])
+@@ -1312,6 +1321,8 @@ int main(int argc, char *argv[])
  	if (os_program_init())
  		return -1;
  

feeds/ipq807x_v5.4/hostapd/patches/300-noscan.patch

@@ -1,6 +1,6 @@
 --- a/hostapd/config_file.c
 +++ b/hostapd/config_file.c
-@@ -3459,6 +3459,10 @@ static int hostapd_config_fill(struct ho
+@@ -3439,6 +3439,10 @@ static int hostapd_config_fill(struct ho
  		if (bss->ocv && !bss->ieee80211w)
  			bss->ieee80211w = 1;
  #endif /* CONFIG_OCV */
@@ -13,7 +13,7 @@
  	} else if (os_strcmp(buf, "ht_capab") == 0) {
 --- a/src/ap/ap_config.h
 +++ b/src/ap/ap_config.h
-@@ -1009,6 +1009,8 @@ struct hostapd_config {
+@@ -995,6 +995,8 @@ struct hostapd_config {
  
  	int ht_op_mode_fixed;
  	u16 ht_capab;

feeds/ipq807x_v5.4/hostapd/patches/310-rescan_immediately.patch

@@ -1,6 +1,6 @@
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -5154,7 +5154,7 @@ wpa_supplicant_alloc(struct wpa_supplica
+@@ -5147,7 +5147,7 @@ wpa_supplicant_alloc(struct wpa_supplica
  	if (wpa_s == NULL)
  		return NULL;
  	wpa_s->scan_req = INITIAL_SCAN_REQ;

feeds/ipq807x_v5.4/hostapd/patches/320-optional_rfkill.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/drivers.mak
 +++ b/src/drivers/drivers.mak
-@@ -54,7 +54,6 @@ NEED_SME=y
+@@ -50,7 +50,6 @@ NEED_SME=y
  NEED_AP_MLME=y
  NEED_NETLINK=y
  NEED_LINUX_IOCTL=y
@@ -8,7 +8,7 @@
  NEED_RADIOTAP=y
  NEED_LIBNL=y
  endif
-@@ -111,7 +110,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT
+@@ -107,7 +106,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT
  CONFIG_WIRELESS_EXTENSION=y
  NEED_NETLINK=y
  NEED_LINUX_IOCTL=y
@@ -16,7 +16,7 @@
  endif
  
  ifdef CONFIG_DRIVER_NDIS
-@@ -137,7 +135,6 @@ endif
+@@ -133,7 +131,6 @@ endif
  ifdef CONFIG_WIRELESS_EXTENSION
  DRV_WPA_CFLAGS += -DCONFIG_WIRELESS_EXTENSION
  DRV_WPA_OBJS += ../src/drivers/driver_wext.o
@@ -24,7 +24,7 @@
  endif
  
  ifdef NEED_NETLINK
-@@ -146,6 +143,7 @@ endif
+@@ -142,6 +139,7 @@ endif
  
  ifdef NEED_RFKILL
  DRV_OBJS += ../src/drivers/rfkill.o

feeds/ipq807x_v5.4/hostapd/patches/330-nl80211_fix_set_freq.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -4973,7 +4973,7 @@ static int nl80211_set_channel(struct i8
+@@ -4919,7 +4919,7 @@ static int nl80211_set_channel(struct i8
  		   freq->freq, freq->ht_enabled, freq->vht_enabled, freq->he_enabled,
  		   freq->bandwidth, freq->center_freq1, freq->center_freq2);
  

feeds/ipq807x_v5.4/hostapd/patches/340-reload_freq_change.patch

@@ -1,75 +0,0 @@
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -115,6 +115,28 @@ static void hostapd_reload_bss(struct ho
- #endif /* CONFIG_NO_RADIUS */
- 
- 	ssid = &hapd->conf->ssid;
-+
-+	hostapd_set_freq(hapd, hapd->iconf->hw_mode, hapd->iface->freq,
-+			 hapd->iconf->channel,
-+			 hapd->iconf->enable_edmg,
-+			 hapd->iconf->edmg_channel,
-+			 hapd->iconf->ieee80211n,
-+			 hapd->iconf->ieee80211ac,
-+			 hapd->iconf->ieee80211ax,
-+			 hapd->iconf->secondary_channel,
-+			 hostapd_get_oper_chwidth(hapd->iconf),
-+			 hostapd_get_oper_centr_freq_seg0_idx(hapd->iconf),
-+			 hostapd_get_oper_centr_freq_seg1_idx(hapd->iconf));
-+
-+	if (hapd->iface->current_mode) {
-+		if (hostapd_prepare_rates(hapd->iface, hapd->iface->current_mode)) {
-+			wpa_printf(MSG_ERROR, "Failed to prepare rates table.");
-+			hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
-+				       HOSTAPD_LEVEL_WARNING,
-+				       "Failed to prepare rates table.");
-+		}
-+	}
-+
- 	if (!ssid->wpa_psk_set && ssid->wpa_psk && !ssid->wpa_psk->next &&
- 	    ssid->wpa_passphrase_set && ssid->wpa_passphrase) {
- 		/*
-@@ -216,6 +238,7 @@ int hostapd_reload_config(struct hostapd
- 	struct hostapd_data *hapd = iface->bss[0];
- 	struct hostapd_config *newconf, *oldconf;
- 	size_t j;
-+	int i;
- 
- 	if (iface->config_fname == NULL) {
- 		/* Only in-memory config in use - assume it has been updated */
-@@ -266,24 +289,20 @@ int hostapd_reload_config(struct hostapd
- 	}
- 	iface->conf = newconf;
- 
-+	for (i = 0; i < iface->num_hw_features; i++) {
-+		struct hostapd_hw_modes *mode = &iface->hw_features[i];
-+		if (mode->mode == iface->conf->hw_mode) {
-+			iface->current_mode = mode;
-+			break;
-+		}
-+	}
-+
-+	if (iface->conf->channel)
-+		iface->freq = hostapd_hw_get_freq(hapd, iface->conf->channel);
-+
- 	for (j = 0; j < iface->num_bss; j++) {
- 		hapd = iface->bss[j];
- 		hapd->iconf = newconf;
--		hapd->iconf->channel = oldconf->channel;
--		hapd->iconf->acs = oldconf->acs;
--		hapd->iconf->secondary_channel = oldconf->secondary_channel;
--		hapd->iconf->ieee80211n = oldconf->ieee80211n;
--		hapd->iconf->ieee80211ac = oldconf->ieee80211ac;
--		hapd->iconf->ht_capab = oldconf->ht_capab;
--		hapd->iconf->vht_capab = oldconf->vht_capab;
--		hostapd_set_oper_chwidth(hapd->iconf,
--					 hostapd_get_oper_chwidth(oldconf));
--		hostapd_set_oper_centr_freq_seg0_idx(
--			hapd->iconf,
--			hostapd_get_oper_centr_freq_seg0_idx(oldconf));
--		hostapd_set_oper_centr_freq_seg1_idx(
--			hapd->iconf,
--			hostapd_get_oper_centr_freq_seg1_idx(oldconf));
- 		hapd->conf = newconf->bss[j];
- 		hostapd_reload_bss(hapd);
- 	}

feeds/ipq807x_v5.4/hostapd/patches/350-nl80211_del_beacon_bss.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -2918,10 +2918,15 @@ static int wpa_driver_nl80211_del_beacon
+@@ -2891,10 +2891,15 @@ static int wpa_driver_nl80211_del_beacon
  	struct nl_msg *msg;
  	struct wpa_driver_nl80211_data *drv = bss->drv;
  
@@ -18,7 +18,7 @@
  	return send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
  }
  
-@@ -5602,7 +5607,7 @@ static void nl80211_teardown_ap(struct i
+@@ -5550,7 +5555,7 @@ static void nl80211_teardown_ap(struct i
  		nl80211_mgmt_unsubscribe(bss, "AP teardown");
  
  	nl80211_put_wiphy_data_ap(bss);
@@ -27,7 +27,7 @@
  }
  
  
-@@ -8051,8 +8056,6 @@ static int wpa_driver_nl80211_if_remove(
+@@ -7990,8 +7995,6 @@ static int wpa_driver_nl80211_if_remove(
  	} else {
  		wpa_printf(MSG_DEBUG, "nl80211: First BSS - reassign context");
  		nl80211_teardown_ap(bss);
@@ -36,7 +36,7 @@
  		nl80211_destroy_bss(bss);
  		if (!bss->added_if)
  			i802_set_iface_flags(bss, 0);
-@@ -8449,7 +8452,6 @@ static int wpa_driver_nl80211_deinit_ap(
+@@ -8388,7 +8391,6 @@ static int wpa_driver_nl80211_deinit_ap(
  	if (!is_ap_interface(drv->nlmode))
  		return -1;
  	wpa_driver_nl80211_del_beacon(bss);
@@ -44,7 +44,7 @@
  
  	/*
  	 * If the P2P GO interface was dynamically added, then it is
-@@ -8469,7 +8471,6 @@ static int wpa_driver_nl80211_stop_ap(vo
+@@ -8408,7 +8410,6 @@ static int wpa_driver_nl80211_stop_ap(vo
  	if (!is_ap_interface(drv->nlmode))
  		return -1;
  	wpa_driver_nl80211_del_beacon(bss);

feeds/ipq807x_v5.4/hostapd/patches/360-ctrl_iface_reload.patch

@@ -1,106 +0,0 @@
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -67,6 +67,7 @@
- #include "fst/fst_ctrl_iface.h"
- #include "config_file.h"
- #include "ctrl_iface.h"
-+#include "config_file.h"
- 
- 
- #define HOSTAPD_CLI_DUP_VALUE_MAX_LEN 256
-@@ -82,6 +83,7 @@ static void hostapd_ctrl_iface_send(stru
- 				    enum wpa_msg_type type,
- 				    const char *buf, size_t len);
- 
-+static char *reload_opts = NULL;
- 
- static int hostapd_ctrl_iface_attach(struct hostapd_data *hapd,
- 				     struct sockaddr_storage *from,
-@@ -133,6 +135,61 @@ static int hostapd_ctrl_iface_new_sta(st
- 	return 0;
- }
- 
-+static char *get_option(char *opt, char *str)
-+{
-+	int len = strlen(str);
-+
-+	if (!strncmp(opt, str, len))
-+		return opt + len;
-+	else
-+		return NULL;
-+}
-+
-+static struct hostapd_config *hostapd_ctrl_iface_config_read(const char *fname)
-+{
-+	struct hostapd_config *conf;
-+	char *opt, *val;
-+
-+	conf = hostapd_config_read(fname);
-+	if (!conf)
-+		return NULL;
-+
-+	for (opt = strtok(reload_opts, " ");
-+	     opt;
-+		 opt = strtok(NULL, " ")) {
-+
-+		if ((val = get_option(opt, "channel=")))
-+			conf->channel = atoi(val);
-+		else if ((val = get_option(opt, "ht_capab=")))
-+			conf->ht_capab = atoi(val);
-+		else if ((val = get_option(opt, "ht_capab_mask=")))
-+			conf->ht_capab &= atoi(val);
-+		else if ((val = get_option(opt, "sec_chan=")))
-+			conf->secondary_channel = atoi(val);
-+		else if ((val = get_option(opt, "hw_mode=")))
-+			conf->hw_mode = atoi(val);
-+		else if ((val = get_option(opt, "ieee80211n=")))
-+			conf->ieee80211n = atoi(val);
-+		else
-+			break;
-+	}
-+
-+	return conf;
-+}
-+
-+static int hostapd_ctrl_iface_update(struct hostapd_data *hapd, char *txt)
-+{
-+	struct hostapd_config * (*config_read_cb)(const char *config_fname);
-+	struct hostapd_iface *iface = hapd->iface;
-+
-+	config_read_cb = iface->interfaces->config_read_cb;
-+	iface->interfaces->config_read_cb = hostapd_ctrl_iface_config_read;
-+	reload_opts = txt;
-+
-+	hostapd_reload_config(iface);
-+
-+	iface->interfaces->config_read_cb = config_read_cb;
-+}
- 
- #ifdef NEED_AP_MLME
- static int hostapd_ctrl_iface_sa_query(struct hostapd_data *hapd,
-@@ -3754,6 +3811,8 @@ static int hostapd_ctrl_iface_receive_pr
- 	} else if (os_strncmp(buf, "VENDOR ", 7) == 0) {
- 		reply_len = hostapd_ctrl_iface_vendor(hapd, buf + 7, reply,
- 						      reply_size);
-+	} else if (os_strncmp(buf, "UPDATE ", 7) == 0) {
-+		hostapd_ctrl_iface_update(hapd, buf + 7);
- 	} else if (os_strcmp(buf, "ERP_FLUSH") == 0) {
- 		ieee802_1x_erp_flush(hapd);
- #ifdef RADIUS_SERVER
---- a/src/ap/ctrl_iface_ap.c
-+++ b/src/ap/ctrl_iface_ap.c
-@@ -919,7 +919,13 @@ int hostapd_parse_csa_settings(const cha
- 
- int hostapd_ctrl_iface_stop_ap(struct hostapd_data *hapd)
- {
--	return hostapd_drv_stop_ap(hapd);
-+	struct hostapd_iface *iface = hapd->iface;
-+	int i;
-+
-+	for (i = 0; i < iface->num_bss; i++)
-+		hostapd_drv_stop_ap(iface->bss[i]);
-+
-+	return 0;
- }
- 
- 

feeds/ipq807x_v5.4/hostapd/patches/370-ap_sta_support.patch

@@ -1,414 +0,0 @@
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/Makefile
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/Makefile
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/Makefile
-@@ -103,6 +103,8 @@ OBJS_c += ../src/utils/common.o
- OBJS_c += ../src/common/cli.o
- OBJS += wmm_ac.o
- 
-+OBJS += ../src/common/wpa_ctrl.o
-+
- ifndef CONFIG_OS
- ifdef CONFIG_NATIVE_WINDOWS
- CONFIG_OS=win32
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/bss.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/bss.c
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/bss.c
-@@ -11,6 +11,7 @@
- #include "utils/common.h"
- #include "utils/eloop.h"
- #include "common/ieee802_11_defs.h"
-+#include "common/ieee802_11_common.h"
- #include "drivers/driver.h"
- #include "eap_peer/eap.h"
- #include "wpa_supplicant_i.h"
-@@ -282,6 +283,10 @@ void calculate_update_time(const struct
- static void wpa_bss_copy_res(struct wpa_bss *dst, struct wpa_scan_res *src,
- 			     struct os_reltime *fetch_time)
- {
-+	struct ieee80211_ht_capabilities *capab;
-+	struct ieee80211_ht_operation *oper;
-+	struct ieee802_11_elems elems;
-+
- 	dst->flags = src->flags;
- 	os_memcpy(dst->bssid, src->bssid, ETH_ALEN);
- 	dst->freq = src->freq;
-@@ -294,6 +299,15 @@ static void wpa_bss_copy_res(struct wpa_
- 	dst->est_throughput = src->est_throughput;
- 	dst->snr = src->snr;
- 
-+	memset(&elems, 0, sizeof(elems));
-+	ieee802_11_parse_elems((u8 *) (src + 1), src->ie_len, &elems, 0);
-+	capab = (struct ieee80211_ht_capabilities *) elems.ht_capabilities;
-+	oper = (struct ieee80211_ht_operation *) elems.ht_operation;
-+	if (capab)
-+		dst->ht_capab = le_to_host16(capab->ht_capabilities_info);
-+	if (oper)
-+		dst->ht_param = oper->ht_param;
-+
- 	calculate_update_time(fetch_time, src->age, &dst->last_update);
- }
- 
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/bss.h
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/bss.h
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/bss.h
-@@ -94,6 +94,10 @@ struct wpa_bss {
- 	u8 ssid[SSID_MAX_LEN];
- 	/** Length of SSID */
- 	size_t ssid_len;
-+	/** HT capabilities */
-+	u16 ht_capab;
-+	/* Five octets of HT Operation Information */
-+	u8 ht_param;
- 	/** Frequency of the channel in MHz (e.g., 2412 = channel 1) */
- 	int freq;
- 	/** Beacon interval in TUs (host byte order) */
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/main.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/main.c
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/main.c
-@@ -34,7 +34,7 @@ static void usage(void)
- 	       "vW] [-P<pid file>] "
- 	       "[-g<global ctrl>] \\\n"
- 	       "        [-G<group>] \\\n"
--	       "        -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] "
-+	       "        -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-H<hostapd path>] "
- 	       "[-p<driver_param>] \\\n"
- 	       "        [-b<br_ifname>] [-e<entropy file>]"
- #ifdef CONFIG_DEBUG_FILE
-@@ -74,6 +74,7 @@ static void usage(void)
- 	       "  -g = global ctrl_interface\n"
- 	       "  -G = global ctrl_interface group\n"
- 	       "  -h = show this help text\n"
-+	       "  -H = connect to a hostapd instance to manage state changes\n"
- 	       "  -i = interface name\n"
- 	       "  -I = additional configuration file\n"
- 	       "  -K = include keys (passwords, etc.) in debug output\n"
-@@ -201,7 +202,7 @@ int main(int argc, char *argv[])
- 
- 	for (;;) {
- 		c = getopt(argc, argv,
--			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:No:O:p:P:qsTtuvW");
-+			   "b:Bc:C:D:de:f:g:G:hH:i:I:KLMm:No:O:p:P:qsTtuvW");
- 		if (c < 0)
- 			break;
- 		switch (c) {
-@@ -248,6 +249,9 @@ int main(int argc, char *argv[])
- 			usage();
- 			exitcode = 0;
- 			goto out;
-+		case 'H':
-+			iface->hostapd_ctrl = optarg;
-+			break;
- 		case 'i':
- 			iface->ifname = optarg;
- 			break;
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/wpa_supplicant.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/wpa_supplicant.c
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/wpa_supplicant.c
-@@ -130,6 +130,54 @@ static void wpas_update_fils_connect_par
- static void wpas_update_owe_connect_params(struct wpa_supplicant *wpa_s);
- #endif /* CONFIG_OWE */
- 
-+static int hostapd_stop(struct wpa_supplicant *wpa_s)
-+{
-+	const char *cmd = "STOP_AP";
-+	char buf[256];
-+	size_t len = sizeof(buf);
-+
-+	if (wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL) < 0) {
-+		wpa_printf(MSG_ERROR, "\nFailed to stop hostapd AP interfaces\n");
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int hostapd_reload(struct wpa_supplicant *wpa_s, struct wpa_bss *bss)
-+{
-+	char *cmd = NULL;
-+	char buf[256];
-+	size_t len = sizeof(buf);
-+	enum hostapd_hw_mode hw_mode;
-+	u8 channel;
-+	int sec_chan = 0;
-+	int ret;
-+
-+	if (!bss)
-+		return -1;
-+
-+	if (bss->ht_param & HT_INFO_HT_PARAM_STA_CHNL_WIDTH) {
-+		int sec = bss->ht_param & HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK;
-+		if (sec == HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE)
-+			sec_chan = 1;
-+		else if (sec ==  HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW)
-+			sec_chan = -1;
-+	}
-+
-+	hw_mode = ieee80211_freq_to_chan(bss->freq, &channel);
-+	if (asprintf(&cmd, "UPDATE channel=%d sec_chan=%d hw_mode=%d",
-+		     channel, sec_chan, hw_mode) < 0)
-+		return -1;
-+
-+	ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL);
-+	free(cmd);
-+
-+	if (ret < 0) {
-+		wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n");
-+		return -1;
-+	}
-+	return 0;
-+}
- 
- #ifdef CONFIG_WEP
- /* Configure default/group WEP keys for static WEP */
-@@ -1007,6 +1055,8 @@ void wpa_supplicant_set_state(struct wpa
- 
- 		sme_sched_obss_scan(wpa_s, 1);
- 
-+		if (wpa_s->hostapd)
-+			hostapd_reload(wpa_s, wpa_s->current_bss);
- #if defined(CONFIG_FILS) && defined(IEEE8021X_EAPOL)
- 		if (!fils_hlp_sent && ssid && ssid->eap.erp)
- 			update_fils_connect_params = true;
-@@ -1017,6 +1067,8 @@ void wpa_supplicant_set_state(struct wpa
- #endif /* CONFIG_OWE */
- 	} else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING ||
- 		   state == WPA_ASSOCIATED) {
-+		if (wpa_s->hostapd)
-+			hostapd_stop(wpa_s);
- 		wpa_s->new_connection = 1;
- 		wpa_drv_set_operstate(wpa_s, 0);
- #ifndef IEEE8021X_EAPOL
-@@ -2276,6 +2328,8 @@ void wpa_supplicant_associate(struct wpa
- 			return;
- 		}
- 		wpa_s->current_bss = bss;
-+		if (wpa_s->hostapd)
-+			hostapd_reload(wpa_s, wpa_s->current_bss);
- #else /* CONFIG_MESH */
- 		wpa_msg(wpa_s, MSG_ERROR,
- 			"mesh mode support not included in the build");
-@@ -6419,6 +6473,16 @@ static int wpa_supplicant_init_iface(str
- 			   sizeof(wpa_s->bridge_ifname));
- 	}
- 
-+	if (iface->hostapd_ctrl) {
-+		wpa_s->hostapd = wpa_ctrl_open(iface->hostapd_ctrl);
-+		if (!wpa_s->hostapd) {
-+			wpa_printf(MSG_ERROR, "\nFailed to connect to hostapd\n");
-+			return -1;
-+		}
-+		if (hostapd_stop(wpa_s) < 0)
-+			return -1;
-+	}
-+
- 	/* RSNA Supplicant Key Management - INITIALIZE */
- 	eapol_sm_notify_portEnabled(wpa_s->eapol, false);
- 	eapol_sm_notify_portValid(wpa_s->eapol, false);
-@@ -6756,6 +6820,11 @@ static void wpa_supplicant_deinit_iface(
- 	if (terminate)
- 		wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_TERMINATING);
- 
-+	if (wpa_s->hostapd) {
-+		wpa_ctrl_close(wpa_s->hostapd);
-+		wpa_s->hostapd = NULL;
-+	}
-+
- 	if (wpa_s->ctrl_iface) {
- 		wpa_supplicant_ctrl_iface_deinit(wpa_s->ctrl_iface);
- 		wpa_s->ctrl_iface = NULL;
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/wpa_supplicant_i.h
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/wpa_supplicant_i.h
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/wpa_supplicant_i.h
-@@ -103,6 +103,11 @@ struct wpa_interface {
- 	const char *ifname;
- 
- 	/**
-+	 * hostapd_ctrl - path to hostapd control socket for notification
-+	 */
-+	const char *hostapd_ctrl;
-+
-+	/**
- 	 * bridge_ifname - Optional bridge interface name
- 	 *
- 	 * If the driver interface (ifname) is included in a Linux bridge
-@@ -611,6 +616,8 @@ struct wpa_supplicant {
- #endif /* CONFIG_CTRL_IFACE_BINDER */
- 	char bridge_ifname[16];
- 
-+	struct wpa_ctrl *hostapd;
-+
- 	char *confname;
- 	char *confanother;
- 
-Index: hostapd-2021-02-20-59e9794c/hostapd/ctrl_iface.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/hostapd/ctrl_iface.c
-+++ hostapd-2021-02-20-59e9794c/hostapd/ctrl_iface.c
-@@ -2781,6 +2781,11 @@ static int hostapd_ctrl_iface_chan_switc
- 		return 0;
- 	}
- 
-+	if (os_strstr(pos, " auto-ht")) {
-+		settings.freq_params.ht_enabled = iface->conf->ieee80211n;
-+		settings.freq_params.vht_enabled = iface->conf->ieee80211ac;
-+	}
-+
- 	for (i = 0; i < iface->num_bss; i++) {
- 
- 		/* Save CHAN_SWITCH VHT and HE config */
-Index: hostapd-2021-02-20-59e9794c/src/ap/beacon.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/ap/beacon.c
-+++ hostapd-2021-02-20-59e9794c/src/ap/beacon.c
-@@ -1753,11 +1753,6 @@ int ieee802_11_set_beacon(struct hostapd
- 	struct wpabuf *beacon, *proberesp, *assocresp;
- 	int res, ret = -1;
- 
--	if (hapd->csa_in_progress) {
--		wpa_printf(MSG_ERROR, "Cannot set beacons during CSA period");
--		return -1;
--	}
--
- 	hapd->beacon_set_done = 1;
- 
- 	if (ieee802_11_build_ap_params(hapd, &params) < 0)
-Index: hostapd-2021-02-20-59e9794c/wpa_supplicant/events.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/wpa_supplicant/events.c
-+++ hostapd-2021-02-20-59e9794c/wpa_supplicant/events.c
-@@ -4666,6 +4666,60 @@ static void wpas_event_unprot_beacon(str
- }
- 
- 
-+static void
-+supplicant_ch_switch_started(struct wpa_supplicant *wpa_s,
-+			    union wpa_event_data *data)
-+{
-+	char buf[256];
-+	size_t len = sizeof(buf);
-+	char *cmd = NULL;
-+	int width = 20;
-+	int ret;
-+
-+	if (!wpa_s->hostapd)
-+		return;
-+
-+	wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_CHANNEL_SWITCH
-+		"count=%d freq=%d ht_enabled=%d ch_offset=%d ch_width=%s cf1=%d cf2=%d",
-+		data->ch_switch.count,
-+		data->ch_switch.freq,
-+		data->ch_switch.ht_enabled,
-+		data->ch_switch.ch_offset,
-+		channel_width_to_string(data->ch_switch.ch_width),
-+		data->ch_switch.cf1,
-+		data->ch_switch.cf2);
-+
-+	switch (data->ch_switch.ch_width) {
-+	case CHAN_WIDTH_20_NOHT:
-+	case CHAN_WIDTH_20:
-+		width = 20;
-+		break;
-+	case CHAN_WIDTH_40:
-+		width = 40;
-+		break;
-+	case CHAN_WIDTH_80:
-+		width = 80;
-+		break;
-+	case CHAN_WIDTH_160:
-+	case CHAN_WIDTH_80P80:
-+		width = 160;
-+		break;
-+	}
-+
-+	asprintf(&cmd, "CHAN_SWITCH %d %d sec_channel_offset=%d center_freq1=%d center_freq2=%d, bandwidth=%d auto-ht\n",
-+		data->ch_switch.count - 1,
-+		data->ch_switch.freq,
-+		data->ch_switch.ch_offset,
-+		data->ch_switch.cf1,
-+		data->ch_switch.cf2,
-+		width);
-+	ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL);
-+	free(cmd);
-+
-+	if (ret < 0)
-+		wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n");
-+}
-+
- void supplicant_event(void *ctx, enum wpa_event_type event,
- 		      union wpa_event_data *data)
- {
-@@ -4981,8 +5035,10 @@ void supplicant_event(void *ctx, enum wp
- 			channel_width_to_string(data->ch_switch.ch_width),
- 			data->ch_switch.cf1,
- 			data->ch_switch.cf2);
--		if (event == EVENT_CH_SWITCH_STARTED)
-+		if (event == EVENT_CH_SWITCH_STARTED) {
-+			supplicant_ch_switch_started(wpa_s, data);
- 			break;
-+		}
- 
- 		wpa_s->assoc_freq = data->ch_switch.freq;
- 		wpa_s->current_ssid->frequency = data->ch_switch.freq;
-Index: hostapd-2021-02-20-59e9794c/src/drivers/driver.h
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/drivers/driver.h
-+++ hostapd-2021-02-20-59e9794c/src/drivers/driver.h
-@@ -5822,6 +5822,7 @@ union wpa_event_data {
- 
- 	/**
- 	 * struct ch_switch
-+	 * @count: Count until channel switch activates
- 	 * @freq: Frequency of new channel in MHz
- 	 * @ht_enabled: Whether this is an HT channel
- 	 * @ch_offset: Secondary channel offset
-@@ -5830,6 +5831,7 @@ union wpa_event_data {
- 	 * @cf2: Center frequency 2
- 	 */
- 	struct ch_switch {
-+		int count;
- 		int freq;
- 		int ht_enabled;
- 		int ch_offset;
-Index: hostapd-2021-02-20-59e9794c/src/drivers/driver_nl80211_event.c
-===================================================================
---- hostapd-2021-02-20-59e9794c.orig/src/drivers/driver_nl80211_event.c
-+++ hostapd-2021-02-20-59e9794c/src/drivers/driver_nl80211_event.c
-@@ -655,7 +655,7 @@ static void mlme_event_ch_switch(struct
- 				 struct nlattr *ifindex, struct nlattr *freq,
- 				 struct nlattr *type, struct nlattr *bw,
- 				 struct nlattr *cf1, struct nlattr *cf2,
--				 int finished)
-+				 struct nlattr *count, int finished)
- {
- 	struct i802_bss *bss;
- 	union wpa_event_data data;
-@@ -714,6 +714,8 @@ static void mlme_event_ch_switch(struct
- 		data.ch_switch.cf1 = nla_get_u32(cf1);
- 	if (cf2)
- 		data.ch_switch.cf2 = nla_get_u32(cf2);
-+	if (count)
-+		data.ch_switch.count = nla_get_u32(count);
- 
- 	if (finished)
- 		bss->freq = data.ch_switch.freq;
-@@ -2886,6 +2888,7 @@ static void do_process_drv_event(struct
- 				     tb[NL80211_ATTR_CHANNEL_WIDTH],
- 				     tb[NL80211_ATTR_CENTER_FREQ1],
- 				     tb[NL80211_ATTR_CENTER_FREQ2],
-+				     tb[NL80211_ATTR_CH_SWITCH_COUNT],
- 				     0);
- 		break;
- 	case NL80211_CMD_CH_SWITCH_NOTIFY:
-@@ -2896,6 +2899,7 @@ static void do_process_drv_event(struct
- 				     tb[NL80211_ATTR_CHANNEL_WIDTH],
- 				     tb[NL80211_ATTR_CENTER_FREQ1],
- 				     tb[NL80211_ATTR_CENTER_FREQ2],
-+				     NULL,
- 				     1);
- 		break;
- 	case NL80211_CMD_DISCONNECT: