ipq807x: fix dwc3 module dependency

Signed-off-by: John Crispin <john@phrozen.org>

.github/workflows/build-dev.yml

@@ -11,7 +11,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf160d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4' ]
+        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf196', 'cig_wf160d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4' ]
 
     steps:
     - uses: actions/checkout@v2

.github/workflows/x64_vm-build-test.yml

@@ -0,0 +1,10 @@
+name: Test x64_vm build and AMI creation
+
+on:
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+    - run: echo 'Test x64_vm build and AMI creation'

README.md

@@ -12,7 +12,7 @@ First we need to clone and setup our tree. This will result in an openwrt/.
 Next we need to select the profile and base package selection. This setup will install the feeds, packages and generate the .config file.
 ```
 cd openwrt
-./scripts/gen_config.py ea8300
+./scripts/gen_config.py linksys_ea8300
 ```
 Finally we can build the tree.
 ```

feeds/bluetooth-cc2652/cc2652/Makefile

@@ -37,6 +37,9 @@ define Package/cc2652/install
 
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_BIN) ./files/tisbl.config $(1)/etc/config/tisbl
+
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/tisbl.defaults $(1)/etc/uci-defaults
 endef
 
 $(eval $(call BuildPackage,cc2652))

feeds/bluetooth-cc2652/cc2652/files/tisbl.config

@@ -1,9 +1,7 @@
 config tisbl 'tisbl'
-    option firmware '/etc/tifirmware/ble5_host_test_bd9.bin'
-    option tty '/dev/ttyMSM1'	# for EAP101 board
-#    option tty '/dev/ttyACM0'	# for virtualbox openwrt 19.07 with TI CC26X2R launchpad
-    option tichip '2652'
-    option baudrate '115200'
-    option resetpin '79'
-    option backdoorpin '34' 	#EAP101-R1
-#    option backdoorpin '67'	#EAP101-R0A-HW-modification
+	option firmware '/etc/tifirmware/ble5_host_test_bd9.bin'
+	option tty '/dev/ttyMSM1'
+	option tichip '2652'
+	option baudrate '115200'
+	option resetpin '79'
+	option backdoorpin '34'

feeds/bluetooth-cc2652/cc2652/files/tisbl.defaults

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case $board in
+edgecore,eap104)
+        uci set tisbl.tisbl.backdoorpin=31
+        uci set tisbl.tisbl.resetpin=35
+        ;;
+esac

feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds

@@ -17,9 +17,6 @@ cig,wf194c4)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
 	;;
-esac
-
-case "$board" in
 edgecore,eap101)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
@@ -32,11 +29,20 @@ edgecore,eap102)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
 	;;
+edgecore,eap104)
+        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+        ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
+	;;
 hfcl,ion4xi|\
 hfcl,ion4xe)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
 	;;
+glinet,ax1800|\
+glinet,axt1800)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
+	;;
 esac
 
 board_config_flush

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -32,15 +32,18 @@ qcom_setup_interfaces()
 	cig,wf194c4|\
 	edgecore,eap106|\
 	qcom,ipq5018-mp03.3|\
+	yuncore,ax840|\
 	sercomm,wallaby)
 		ucidef_set_interface_lan "eth0"
 		ucidef_set_interface_wan "eth1"
 		;;
-	edgecore,eap101)
+	edgecore,eap101|\
+	glinet,axt1800)
 		ucidef_set_interface_lan "eth1 eth2"
 		ucidef_set_interface_wan "eth0"
 		;;
 	edgecore,eap102|\
+	edgecore,eap104|\
 	wallys,dr6018|\
 	cig,wf188n|\
 	cig,wf196)
@@ -51,7 +54,8 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"
 		;;
-	wallys,dr6018-v4)
+	wallys,dr6018-v4|\
+	glinet,ax1800)
 		ucidef_set_interface_lan "eth1 eth2 eth3 eth4"
 		ucidef_set_interface_wan "eth0"
 		;;
@@ -72,7 +76,8 @@ qcom_setup_macs()
 
 	case $board in
 	cig,wf194c|\
-	cig,wf194c4)
+	cig,wf194c4|\
+	cig,wf196)
 		mac=$(grep BaseMacAddress= /dev/mtd14 | cut -dx -f2)
 		wan_mac=$(macaddr_canonicalize $mac)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -80,6 +85,15 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth1 $wan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	cybertan,eww622-a1)
+	        mac=$(grep -i -m 1 mac_addr_base= /dev/`cat /proc/mtd | grep devinfo | cut -d: -f1` | cut -d= -f2)
+	        [ -z "$mac"] && mac="00:11:22:33:44:55"
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ucidef_set_label_macaddr $wan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -87,11 +101,11 @@ qcom_setup_macs()
 	esac
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
 	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$wan_mac" ] && ucidef_set_label_macaddr "$wan_mac"
 }
 
 board_config_update
 board=$(board_name)
-ucidef_set_bridge_device bridge
 qcom_setup_interfaces $board
 qcom_setup_macs $board
 board_config_flush

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -81,6 +81,7 @@ case "$FIRMWARE" in
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
 	tplink,ex447|\
+	yuncore,ax840|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -96,7 +97,8 @@ case "$FIRMWARE" in
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	qcom,ipq6018-cp01|\
-	xiaomi,ax1800)
+	xiaomi,ax1800|\
+	glinet,ax1800)
                 caldata_extract "0:ART" 0x1000 0x20000  
 		;;
 	esac
@@ -104,11 +106,19 @@ case "$FIRMWARE" in
 ath11k/IPQ5018/hw1.0/caldata.bin)
 	case "$board" in
 	cybertan,eww622-a1|\
+	edgecore,eap104|\
 	qcom,ipq5018-mp03.1)
                 caldata_extract "0:ART" 0x1000 0x20000  
 		;;
 	esac
 	;;
+ath11k/qcn6122/hw1.0/caldata_2.bin)
+	case "$board" in
+	edgecore,eap104)
+                caldata_extract "0:ART" 0x4c000 0x20000  
+		;;
+	esac
+	;;
 ath11k/QCN9074/hw1.0/caldata_1.bin)
 	case "$board" in
 	cig,wf196|\

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/net/20-smp-tune

@@ -1,67 +0,0 @@
-#!/bin/sh
-[ "$ACTION" = add ] || exit
-
-NPROCS="$(grep -c "^processor.*:" /proc/cpuinfo)"
-[ "$NPROCS" -gt 1 ] || exit
-
-PROC_MASK="$(( (1 << $NPROCS) - 1 ))"
-
-find_irq_cpu() {
-	local dev="$1"
-	local match="$(grep -m 1 "$dev\$" /proc/interrupts)"
-	local cpu=0
-
-	[ -n "$match" ] && {
-		set -- $match
-		shift
-		for cur in `seq 1 $NPROCS`; do
-			[ "$1" -gt 0 ] && {
-				cpu=$(($cur - 1))
-				break
-			}
-			shift
-		done
-	}
-
-	echo "$cpu"
-}
-
-set_hex_val() {
-	local file="$1"
-	local val="$2"
-	val="$(printf %x "$val")"
-	[ -n "$DEBUG" ] && echo "$file = $val"
-	echo "$val" > "$file"
-}
-
-default_ps="$(uci get "network.@globals[0].default_ps")"
-[ -n "$default_ps" -a "$default_ps" != 1 ] && exit 0
-
-exec 512>/var/lock/smp_tune.lock
-flock 512 || exit 1
-
-for dev in /sys/class/net/*; do
-	[ -d "$dev" ] || continue
-
-	# ignore virtual interfaces
-	[ -n "$(ls "${dev}/" | grep '^lower_')" ] && continue
-	[ -d "${dev}/device" ] || continue
-
-	device="$(readlink "${dev}/device")"
-	device="$(basename "$device")"
-	irq_cpu="$(find_irq_cpu "$device")"
-	irq_cpu_mask="$((1 << $irq_cpu))"
-
-	for q in ${dev}/queues/rx-*; do
-		set_hex_val "$q/rps_cpus" "$(($PROC_MASK & ~$irq_cpu_mask))"
-	done
-
-	ntxq="$(ls -d ${dev}/queues/tx-* | wc -l)"
-
-	idx=$(($irq_cpu + 1))
-	for q in ${dev}/queues/tx-*; do
-		set_hex_val "$q/xps_cpus" "$((1 << $idx))"
-		let "idx = idx + 1"
-		[ "$idx" -ge "$NPROCS" ] && idx=0
-	done
-done

feeds/ipq807x/ipq807x/base-files/etc/init.d/bootcount

@@ -6,7 +6,11 @@ boot() {
 	case "$(board_name)" in
 	edgecore,eap101|\
 	edgecore,eap102)
-		fw_setenv bootcount 0
+		avail=$(fw_printenv -n upgrade_available)
+		[ ${avail} -eq 0 ] || {
+			fw_setenv bootcount 0
+			fw_setenv upgrade_available 0
+		}
 		;;
 	esac
 }

feeds/ipq807x/ipq807x/base-files/etc/init.d/smp

@@ -1,58 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-
-set_affinity() {
-	local affinity=$1
-	local name=$2
-	local irq=`grep -E -m1 $name /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-        [ -n "$irq" ] && {
-		logger ath11k setting affinity for $name/$irq to $affinity
-		echo $affinity > /proc/irq/$irq/smp_affinity
-	}
-}
-
-boot() {
-	. /lib/functions/system.sh
-
-	board=$(board_name)
-	case $board in
-	cig,wf196)
-		set_affinity 1 reo2host-destination-ring2
-		set_affinity 2 reo2host-destination-ring1
-		;;
-	*)
-		set_affinity 2 reo2host-destination-ring2
-		set_affinity 1 reo2host-destination-ring1
-		;;
-	esac
-
-	case $board in
-	maple)
-		;;
-	*)
-		set_affinity 8 reo2host-destination-ring4
-		set_affinity 4 reo2host-destination-ring3
-	
-		set_affinity 8 wbm2host-tx-completions-ring3
-		set_affinity 4 wbm2host-tx-completions-ring2
-		set_affinity 2 wbm2host-tx-completions-ring1
-
-		set_affinity 8 ppdu-end-interrupts-mac1
-		set_affinity 8 rxdma2host-monitor-status-ring-mac1
-		set_affinity 8 rxdma2host-monitor-destination-mac1
-		set_affinity 8 host2rxdma-monitor-ring1
-		;;
-	esac
-
-	set_affinity 4 ppdu-end-interrupts-mac2
-	set_affinity 4 rxdma2host-monitor-status-ring-mac2
-	set_affinity 4 rxdma2host-monitor-destination-mac2
-	set_affinity 4 host2rxdma-monitor-ring2
-
-	set_affinity 2 ppdu-end-interrupts-mac3
-	set_affinity 2 rxdma2host-monitor-status-ring-mac3
-	set_affinity 2 rxdma2host-monitor-destination-mac3
-	set_affinity 2 host2rxdma-monitor-ring3
-}
-

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -26,15 +26,19 @@ platform_check_image() {
 	cig,wf194c4|\
 	cig,wf196|\
 	cybertan,eww622-a1|\
+	glinet,ax1800|\
+	glinet,axt1800|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
 	edgecore,eap102|\
+	edgecore,eap104|\
 	edgecore,eap106|\
 	hfcl,ion4xi|\
 	hfcl,ion4xe|\
 	tplink,ex227|\
 	tplink,ex447|\
+	yuncore,ax840|\
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
@@ -60,6 +64,9 @@ platform_do_upgrade() {
 	cig,wf194c4|\
 	cig,wf196|\
 	cybertan,eww622-a1|\
+	edgecore,eap104|\
+	glinet,ax1800|\
+	glinet,axt1800|\
 	hfcl,ion4xi|\
 	hfcl,ion4xe|\
 	qcom,ipq6018-cp01|\
@@ -68,6 +75,7 @@ platform_do_upgrade() {
 	qcom,ipq5018-mp03.3|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
+	yuncore,ax840|\
 	tplink,ex447|\
 	tplink,ex227)	
 		nand_upgrade_tar "$1"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-eap104.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-eap104.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-gl-ax1800.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-gl-ax1800.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-gl-axt1800.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-gl-axt1800.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-yuncore-ax840.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-yuncore-ax840.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww622-a1.dts

@@ -32,6 +32,10 @@
 		serial1 = &blsp1_uart2;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
+	        led-boot = &led_sys;
+		led-failsafe = &led_sys;
+		led-running = &led_sys;
+		led-upgrade = &led_sys;
 	};
 
 	chosen {
@@ -708,32 +712,20 @@
 		pinctrl-0 = <&leds_pins>;
 		pinctrl-names = "default";
 
-		led@1 {
+		led_sys: led@1 {
 			label = "sys:blue";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;  /* GPIO_1 */
-		/*	default-state="on"; */
-			linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
 			default-state="on";
 		};
 		led@35 {
 			label = "sys:green";
 			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;  /* GPIO_35 */
 			default-state="off";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
 		};
 		led@31 {
 			label = "sys:red";
 			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;  /* GPIO_31 */
 			default-state="off";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
 		};
 	};
 };

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-ax1800.dts

@@ -0,0 +1,78 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-gl-ax1800.dtsi"
+
+/ {
+	model = "GL Technologies, Inc. AX1800";
+	compatible = "glinet,ax1800", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+	};
+};
+
+&mdio0 {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&ess0 {
+	switch_lan_bmp = <0x3c>; /* lan port bitmap */
+
+	qcom,port_phyinfo {
+		port@3 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+		port@4 {
+			port_id = <5>;
+			phy_address = <4>;
+		};
+	};
+};
+
+&soc {
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-ax1800.dtsi

@@ -0,0 +1,364 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	aliases {
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+
+		led-boot = &led_run;
+		led-failsafe = &led_run;
+		led-running = &led_run;
+		led-upgrade = &led_run;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		switch_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		reset_button {
+			pins = "gpio18";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio74";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		white {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		blue {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	usb_pins: usb_pins {
+		usb_pwr {
+			pins = "gpio0";
+			function = "gpio";
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&soc {
+	mdio0: mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+
+	ess0: ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x0c>; /* lan port bitmap */
+		switch_wan_bmp = <0x02>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <1>;
+				phy_address = <0>;
+			};
+			port@1 {
+				port_id = <2>;
+				phy_address = <1>;
+			};
+			port@2 {
+				port_id = <3>;
+				phy_address = <2>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_run: led@35 {
+			label = "white:sys";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@37 {
+			label = "blue:wan";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		switch {
+			label = "switch";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&usb3 {
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&q6_region {
+	reg = <0x0 0x4ab00000 0x0 0x05500000>;
+};
+
+&CPU0 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU1 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU2 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU3 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-axt1800.dts

@@ -0,0 +1,94 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-gl-ax1800.dtsi"
+
+/ {
+	model = "GL Technologies, Inc. AXT1800";
+	compatible = "glinet,axt1800", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		sdhc0 = &sdhc_2;
+	};
+};
+
+&tlmm {
+	sd_pins: sd_pins {
+		sd {
+			pins = "gpio62";
+			function = "sd_card";
+			bias-pull-up;
+		};
+		ldo {
+			pins = "gpio66";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	pwm_pins: pwm_pinmux {
+		pwm {
+			pins = "gpio30";
+			function = "pwm13";
+			drive-strength = <8>;
+		};
+	};
+
+	fan_pins: fan_pins {
+		pwr {
+			pins = "gpio29";
+			function = "gpio";
+			bias-pull-up;
+			output-high;
+		};
+		speed {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	pwm:pwm {
+		#pwm-cells = <2>;
+		pinctrl-0 = <&pwm_pins>;
+		pinctrl-names = "default";
+		used-pwm-indices = <0>, <1>, <0>, <0>;
+		status = "ok";
+	};
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-0 = <&fan_pins>;
+		pinctrl-names = "default";
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 1 255>;
+		cooling-levels = <0 150 200 255>;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&tlmm 62 1>;
+	sd-ldo-gpios = <&tlmm 66 1>;
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-ax840.dts

@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "YunCore AX840";
+	compatible = "yuncore,ax840", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp2";
+		ethernet1 = "/soc/dp1";
+
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qpic_pad {
+			pins = "gpio1",  "gpio3",  "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		rst_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_green {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_red {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio: mdio@90000 {
+		status = "ok";
+
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+
+		ethernet-phy@0 {
+			reg = <0x03>;
+		};
+
+		ethernet-phy@1 {
+			reg = <0x04>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
+		switch_lan_bmp =   <0x10>; /* lan port bitmap */
+		switch_wan_bmp =   <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0x80>; /*inner port bitmap*/
+		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <0x04>;
+				phy_address = <0x03>;
+			};
+
+			port@4 {
+				port_id = <0x05>;
+				phy_address = <0x04>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x05>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x04>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x04>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x03>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_system: system {
+			label = "ax860:green:system";
+			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "ax860:blue:wlan2g";
+			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "ax860:red:wlan5g";
+			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&cpu0_opp_table {
+	compatible = "operating-points-v2";
+	opp-shared;
+
+	opp03 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <3>;
+		clock-latency-ns = <200000>;
+	};
+
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wf196.dts

@@ -39,6 +39,11 @@
 		ethernet3 = "/soc/dp4";
 		ethernet4 = "/soc/dp5";
 		ethernet5 = "/soc/dp6";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -46,7 +51,7 @@
 		#ifdef __IPQ_MEM_PROFILE_256_MB__
 			bootargs-append = " swiotlb=1";
 		#else
-			bootargs-append = " swiotlb=1 coherent_pool=2M";
+			bootargs-append = " swiotlb=1 coherent_pool=2M vmalloc=600M";
 		#endif
 	};
 
@@ -325,15 +330,22 @@
 	};
 
 	led_pins: led_pins {
-		led_2g {
-			pins = "gpio42";
+		led_red {
+			pins = "gpio25";
 			function = "gpio";
 			drive-strength = <8>;
 			bias-pull-down;
 		};
 
-		led_5g {
-			pins = "gpio43";
+		led_green {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_blue {
+			pins = "gpio27";
 			function = "gpio";
 			drive-strength = <8>;
 			bias-pull-down;
@@ -379,7 +391,7 @@
                 pinctrl-0 = <&pwm_pins>;
                 pinctrl-names = "default";
                 used-pwm-indices = <1>, <1>, <1>, <0>;
-                status = "ok";
+         //       status = "ok";
         };
 	gpio_keys {
 		compatible = "gpio-keys";
@@ -810,15 +822,21 @@
 		pinctrl-0 = <&led_pins>;
 		pinctrl-names = "default";
 
-		led_2g {
-			label = "led_2g";
-			gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+		led_red {
+			label = "red:status";
+			gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led_5g {
-			label = "led_5g";
-			gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		led_power: led_green {
+			label = "green:status";
+			gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_blue {
+			label = "blue:status";
+			gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};

feeds/ipq807x/ipq807x/image/ipq50xx.mk

@@ -9,6 +9,15 @@ define Device/cybertan_eww622_a1
 endef
 TARGET_DEVICES += cybertan_eww622_a1
 
+define Device/edgecore_eap104
+  DEVICE_TITLE := EdgeCore EAP104
+  DEVICE_DTS := qcom-ipq5018-eap104
+  SUPPORTED_DEVICES := edgecore,eap104
+  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap104 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += edgecore_eap104
+
 define Device/qcom_mp03_1
   DEVICE_TITLE := Qualcomm Maple 03.1
   DEVICE_DTS := qcom-ipq5018-mp03.1

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -72,3 +72,30 @@ define Device/qcom_cp01_c1
   DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018
 endef
 TARGET_DEVICES += qcom_cp01_c1
+
+define Device/glinet_ax1800
+  DEVICE_TITLE := GL-iNet AX1800
+  DEVICE_DTS := qcom-ipq6018-gl-ax1800
+  SUPPORTED_DEVICES := glinet,ax1800
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-gl-ax1800 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
+endef
+TARGET_DEVICES += glinet_ax1800
+
+define Device/glinet_axt1800
+  DEVICE_TITLE := GL-iNet AXT1800
+  DEVICE_DTS := qcom-ipq6018-gl-axt1800
+  SUPPORTED_DEVICES := glinet,axt1800
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-gl-ax1800 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
+endef
+TARGET_DEVICES += glinet_axt1800
+
+define Device/yuncore_ax840
+  DEVICE_TITLE := YunCore AX840
+  DEVICE_DTS := qcom-ipq6018-yuncore-ax840
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := yuncore,ax840
+  DEVICE_PACKAGES := ath11k-wifi-yuncore-ax840 uboot-env
+endef
+TARGET_DEVICES += yuncore_ax840

feeds/ipq807x/ipq807x/image/ipq807x.mk

@@ -41,6 +41,8 @@ define Device/cig_wf196
   DEVICE_DTS := qcom-ipq807x-wf196
   DEVICE_DTS_CONFIG=config@hk14
   SUPPORTED_DEVICES := cig,wf196
+  BLOCKSIZE := 256k
+  PAGESIZE := 4096
   DEVICE_PACKAGES := ath11k-wifi-cig-wf196 aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
   	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g
 endef

feeds/ipq807x/ipq807x/ipq50xx/target.mk

@@ -3,7 +3,7 @@ SUBTARGET:=ipq50xx
 BOARDNAME:=IPQ50XX
 CPU_TYPE:=cortex-a7
 
-DEFAULT_PACKAGES += ath11k-firmware-ipq50xx qca-nss-fw-ipq50xx
+DEFAULT_PACKAGES += qca-nss-fw-ipq50xx
 
 define Target/Description
 	Build firmware image for IPQ50xx SoC devices.

feeds/ipq807x/ipq807x/modules.mk

@@ -111,3 +111,22 @@ define KernelPackage/diag-char/description
 endef
 
 $(eval $(call KernelPackage,diag-char))
+
+define KernelPackage/usb-dwc3-qcom
+  TITLE:=DWC3 Qualcomm USB driver
+  DEPENDS:=@(!LINUX_4_14) @TARGET_ipq807x +kmod-usb-dwc3
+  KCONFIG:= CONFIG_USB_DWC3_QCOM
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko \
+        $(LINUX_DIR)/drivers/usb/dwc3/dbm.ko
+  AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom dbm,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-qcom/description
+ Some Qualcomm SoCs use DesignWare Core IP for USB2/3 functionality.
+ This driver also handles Qscratch wrapper which is needed for
+ peripheral mode support.
+endef
+
+
+$(eval $(call KernelPackage,usb-dwc3-qcom))

feeds/ipq807x/ipq807x/patches/001-backport_kbuild_fix.patch

@@ -0,0 +1,25 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -96,10 +96,10 @@ obj-dirs	:= $(addprefix $(obj)/,$(obj-di
+ # Note: Files that end up in two or more modules are compiled without the
+ #       KBUILD_MODNAME definition. The reason is that any made-up name would
+ #       differ in different configs.
+-name-fix = $(subst $(comma),_,$(subst -,_,$1))
+-basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
++name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
++basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
+ modname_flags  = $(if $(filter 1,$(words $(modname))),\
+-                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
++                 -DKBUILD_MODNAME=$(call name-fix,$(modname)))
+ 
+ orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
+                  $(ccflags-y) $(CFLAGS_$(basetarget).o)
+@@ -155,7 +155,7 @@ endif
+ 
+ c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+ 		 $(__c_flags) $(modkern_cflags)                           \
+-		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
++		 $(basename_flags) $(modname_flags)
+ 
+ a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+ 		 $(__a_flags) $(modkern_aflags)

feeds/ipq807x/ipq807x/patches/108-add-W25N01GW.patch

@@ -0,0 +1,14 @@
+Index: linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/mtd/nand/qcom_nandc.c
+===================================================================
+--- linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016.orig/drivers/mtd/nand/qcom_nandc.c
++++ linux-4.4.60-qsdk-11f09717303ecd83c3a64e9efe23f25921dc1016/drivers/mtd/nand/qcom_nandc.c
+@@ -405,6 +405,9 @@ struct nand_flash_dev qspinand_flash_ids
+ 	{"MX35UF1GE4AC SPI NAND 1G 1.8V",
+ 		{ .id = {0xc2, 0x92} },
+ 		SZ_2K, SZ_128, SZ_128K, 0, 2, 64, NAND_ECC_INFO(4, SZ_512), 0},
++	{"W25N01GW SPI NAND 1.8V 1G-BIT",
++		{ .id = {0xef, 0xba} },
++		SZ_2K, SZ_128, SZ_128K, 0, 2, 64, NAND_ECC_INFO(4, SZ_512), 0},
+ 	{NULL}
+ };
+ 

feeds/ipq807x/ipq807x/patches/213-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch

@@ -46,7 +46,50 @@ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
  			wake_up_process(thread);
  			return;
  		}
-@@ -5053,16 +5055,25 @@ static int napi_poll(struct napi_struct
+@@ -4745,12 +4747,14 @@ void __napi_complete(struct napi_struct
+ 	list_del_init(&n->poll_list);
+ 	smp_mb__before_atomic();
+ 	clear_bit(NAPI_STATE_SCHED, &n->state);
++	clear_bit(NAPI_STATE_SCHED_THREADED, &n->state);
+ }
+ EXPORT_SYMBOL(__napi_complete);
+ 
+ void napi_complete_done(struct napi_struct *n, int work_done)
+ {
+ 	unsigned long flags;
++	unsigned long val, new;
+ 
+ 	/*
+ 	 * don't let napi dequeue from the cpu poll list
+@@ -4771,14 +4775,19 @@ void napi_complete_done(struct napi_stru
+ 		else
+ 			napi_gro_flush(n, false);
+ 	}
+-	if (likely(list_empty(&n->poll_list))) {
+-		WARN_ON_ONCE(!test_and_clear_bit(NAPI_STATE_SCHED, &n->state));
+-	} else {
+-		/* If n->poll_list is not empty, we need to mask irqs */
+-		local_irq_save(flags);
+-		__napi_complete(n);
+-		local_irq_restore(flags);
+-	}
++
++	/* If n->poll_list is not empty, we need to mask irqs */
++	local_irq_save(flags);
++	list_del_init(&n->poll_list);
++	local_irq_restore(flags);
++
++	do {
++		val = READ_ONCE(n->state);
++
++		WARN_ON_ONCE(!(val & BIT(NAPI_STATE_SCHED)));
++		new = val & ~(BIT(NAPI_STATE_SCHED) |
++			      BIT(NAPI_STATE_SCHED_THREADED));
++	} while (cmpxchg(&n->state, val, new) != val);
+ }
+ EXPORT_SYMBOL(napi_complete_done);
+ 
+@@ -5053,16 +5062,25 @@ static int napi_poll(struct napi_struct
  
  static int napi_thread_wait(struct napi_struct *napi)
  {

feeds/ipq807x/ipq807x/patches/214-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch

@@ -34,7 +34,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -5059,7 +5059,7 @@ static int napi_thread_wait(struct napi_
+@@ -5066,7 +5066,7 @@ static int napi_thread_wait(struct napi_
  
  	set_current_state(TASK_INTERRUPTIBLE);
  
@@ -43,7 +43,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  		/* Testing SCHED_THREADED bit here to make sure the current
  		 * kthread owns this napi and could poll on this napi.
  		 * Testing SCHED bit is not enough because SCHED bit might be
-@@ -5077,6 +5077,7 @@ static int napi_thread_wait(struct napi_
+@@ -5084,6 +5084,7 @@ static int napi_thread_wait(struct napi_
  		set_current_state(TASK_INTERRUPTIBLE);
  	}
  	__set_current_state(TASK_RUNNING);

feeds/ipq807x/ipq807x/patches/220-net-sched-add-clsact-qdisc.patch

@@ -0,0 +1,439 @@
+From: Daniel Borkmann <daniel@iogearbox.net>
+Date: Thu, 7 Jan 2016 22:29:47 +0100
+Subject: [PATCH] net, sched: add clsact qdisc
+
+This work adds a generalization of the ingress qdisc as a qdisc holding
+only classifiers. The clsact qdisc works on ingress, but also on egress.
+In both cases, it's execution happens without taking the qdisc lock, and
+the main difference for the egress part compared to prior version of [1]
+is that this can be applied with _any_ underlying real egress qdisc (also
+classless ones).
+
+Besides solving the use-case of [1], that is, allowing for more programmability
+on assigning skb->priority for the mqprio case that is supported by most
+popular 10G+ NICs, it also opens up a lot more flexibility for other tc
+applications. The main work on classification can already be done at clsact
+egress time if the use-case allows and state stored for later retrieval
+f.e. again in skb->priority with major/minors (which is checked by most
+classful qdiscs before consulting tc_classify()) and/or in other skb fields
+like skb->tc_index for some light-weight post-processing to get to the
+eventual classid in case of a classful qdisc. Another use case is that
+the clsact egress part allows to have a central egress counterpart to
+the ingress classifiers, so that classifiers can easily share state (e.g.
+in cls_bpf via eBPF maps) for ingress and egress.
+
+Currently, default setups like mq + pfifo_fast would require for this to
+use, for example, prio qdisc instead (to get a tc_classify() run) and to
+duplicate the egress classifier for each queue. With clsact, it allows
+for leaving the setup as is, it can additionally assign skb->priority to
+put the skb in one of pfifo_fast's bands and it can share state with maps.
+Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid)
+w/o the need to perform a skb_dst_force() to hold on to it any longer. In
+lwt case, we can also use this facility to setup dst metadata via cls_bpf
+(bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for
+that (case of IFF_NO_QUEUE devices, for example).
+
+The realization can be done without any changes to the scheduler core
+framework. All it takes is that we have two a-priori defined minors/child
+classes, where we can mux between ingress and egress classifier list
+(dev->ingress_cl_list and dev->egress_cl_list, latter stored close to
+dev->_tx to avoid extra cacheline miss for moderate loads). The egress
+part is a bit similar modelled to handle_ing() and patched to a noop in
+case the functionality is not used. Both handlers are now called
+sch_handle_ingress() and sch_handle_egress(), code sharing among the two
+doesn't seem practical as there are various minor differences in both
+paths, so that making them conditional in a single handler would rather
+slow things down.
+
+Full compatibility to ingress qdisc is provided as well. Since both
+piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist
+per netdevice, and thus ingress qdisc specific behaviour can be retained
+for user space. This means, either a user does 'tc qdisc add dev foo ingress'
+and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact'
+alternative, where both, ingress and egress classifier can be configured
+as in the below example. ingress qdisc supports attaching classifier to any
+minor number whereas clsact has two fixed minors for muxing between the
+lists, therefore to not break user space setups, they are better done as
+two separate qdiscs.
+
+I decided to extend the sch_ingress module with clsact functionality so
+that commonly used code can be reused, the module is being aliased with
+sch_clsact so that it can be auto-loaded properly. Alternative would have been
+to add a flag when initializing ingress to alter its behaviour plus aliasing
+to a different name (as it's more than just ingress). However, the first would
+end up, based on the flag, choosing the new/old behaviour by calling different
+function implementations to handle each anyway, the latter would require to
+register ingress qdisc once again under different alias. So, this really begs
+to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops
+by its own that share callbacks used by both.
+
+Example, adding qdisc:
+
+   # tc qdisc add dev foo clsact
+   # tc qdisc show dev foo
+   qdisc mq 0: root
+   qdisc pfifo_fast 0: parent :1 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc pfifo_fast 0: parent :2 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc pfifo_fast 0: parent :3 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc pfifo_fast 0: parent :4 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc clsact ffff: parent ffff:fff1
+
+Adding filters (deleting, etc works analogous by specifying ingress/egress):
+
+   # tc filter add dev foo ingress bpf da obj bar.o sec ingress
+   # tc filter add dev foo egress  bpf da obj bar.o sec egress
+   # tc filter show dev foo ingress
+   filter protocol all pref 49152 bpf
+   filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action
+   # tc filter show dev foo egress
+   filter protocol all pref 49152 bpf
+   filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action
+
+A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will
+show an empty list for clsact. Either using the parent names (ingress/egress)
+or specifying the full major/minor will then show the related filter lists.
+
+Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend.
+
+  [1] http://patchwork.ozlabs.org/patch/512949/
+
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+Acked-by: John Fastabend <john.r.fastabend@intel.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1770,7 +1770,9 @@ struct net_device {
+ #ifdef CONFIG_XPS
+ 	struct xps_dev_maps __rcu *xps_maps;
+ #endif
+-
++#ifdef CONFIG_NET_CLS_ACT
++	struct tcf_proto __rcu  *egress_cl_list;
++#endif
+ #ifdef CONFIG_NET_SWITCHDEV
+ 	u32			offload_fwd_mark;
+ #endif
+--- a/include/linux/rtnetlink.h
++++ b/include/linux/rtnetlink.h
+@@ -84,6 +84,11 @@ void net_inc_ingress_queue(void);
+ void net_dec_ingress_queue(void);
+ #endif
+ 
++#ifdef CONFIG_NET_EGRESS
++void net_inc_egress_queue(void);
++void net_dec_egress_queue(void);
++#endif
++
+ extern void rtnetlink_init(void);
+ extern void __rtnl_unlock(void);
+ 
+--- a/include/uapi/linux/pkt_sched.h
++++ b/include/uapi/linux/pkt_sched.h
+@@ -72,6 +72,10 @@ struct tc_estimator {
+ #define TC_H_UNSPEC	(0U)
+ #define TC_H_ROOT	(0xFFFFFFFFU)
+ #define TC_H_INGRESS    (0xFFFFFFF1U)
++#define TC_H_CLSACT	TC_H_INGRESS
++
++#define TC_H_MIN_INGRESS	0xFFF2U
++#define TC_H_MIN_EGRESS		0xFFF3U
+ 
+ /* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */
+ enum tc_link_layer {
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -1697,6 +1697,22 @@ void net_dec_ingress_queue(void)
+ EXPORT_SYMBOL_GPL(net_dec_ingress_queue);
+ #endif
+ 
++#ifdef CONFIG_NET_EGRESS
++static struct static_key egress_needed __read_mostly;
++
++void net_inc_egress_queue(void)
++{
++	static_key_slow_inc(&egress_needed);
++}
++EXPORT_SYMBOL_GPL(net_inc_egress_queue);
++
++void net_dec_egress_queue(void)
++{
++	static_key_slow_dec(&egress_needed);
++}
++EXPORT_SYMBOL_GPL(net_dec_egress_queue);
++#endif
++
+ static struct static_key netstamp_needed __read_mostly;
+ #ifdef HAVE_JUMP_LABEL
+ static atomic_t netstamp_needed_deferred;
+@@ -2936,7 +2952,6 @@ static inline int __dev_xmit_skb(struct
+ 	bool contended;
+ 	int rc;
+ 
+-	qdisc_pkt_len_init(skb);
+ 	qdisc_calculate_pkt_len(skb, q);
+ 	/*
+ 	 * Heuristic to force contended enqueues to serialize on a
+@@ -3028,6 +3043,49 @@ int dev_loopback_xmit(struct net *net, s
+ }
+ EXPORT_SYMBOL(dev_loopback_xmit);
+ 
++#ifdef CONFIG_NET_EGRESS
++static struct sk_buff *
++sch_handle_egress(struct sk_buff *skb, int *ret, struct net_device *dev)
++{
++	struct tcf_proto *cl = rcu_dereference_bh(dev->egress_cl_list);
++	struct tcf_result cl_res;
++
++	if (!cl)
++		return skb;
++
++	/* skb->tc_verd and qdisc_skb_cb(skb)->pkt_len were already set
++	 * earlier by the caller.
++	 */
++	qdisc_bstats_cpu_update(cl->q, skb);
++
++	switch (tc_classify(skb, cl, &cl_res, false)) {
++	case TC_ACT_OK:
++	case TC_ACT_RECLASSIFY:
++		skb->tc_index = TC_H_MIN(cl_res.classid);
++		break;
++	case TC_ACT_SHOT:
++		qdisc_qstats_cpu_drop(cl->q);
++		*ret = NET_XMIT_DROP;
++		goto drop;
++	case TC_ACT_STOLEN:
++	case TC_ACT_QUEUED:
++		*ret = NET_XMIT_SUCCESS;
++drop:
++		kfree_skb(skb);
++		return NULL;
++	case TC_ACT_REDIRECT:
++		/* No need to push/pop skb's mac_header here on egress! */
++		skb_do_redirect(skb);
++		*ret = NET_XMIT_SUCCESS;
++		return NULL;
++	default:
++		break;
++	}
++
++	return skb;
++}
++#endif /* CONFIG_NET_EGRESS */
++
+ static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb)
+ {
+ #ifdef CONFIG_XPS
+@@ -3152,6 +3210,17 @@ static int __dev_queue_xmit(struct sk_bu
+ 
+ 	skb_update_prio(skb);
+ 
++	qdisc_pkt_len_init(skb);
++#ifdef CONFIG_NET_CLS_ACT
++	skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS);
++# ifdef CONFIG_NET_EGRESS
++	if (static_key_false(&egress_needed)) {
++		skb = sch_handle_egress(skb, &rc, dev);
++		if (!skb)
++			goto out;
++	}
++# endif
++#endif
+ 	/* If device/qdisc don't need skb->dst, release it right now while
+ 	 * its hot in this cpu cache.
+ 	 */
+@@ -3173,9 +3242,6 @@ static int __dev_queue_xmit(struct sk_bu
+ 	txq = netdev_pick_tx(dev, skb, accel_priv);
+ 	q = rcu_dereference_bh(txq->qdisc);
+ 
+-#ifdef CONFIG_NET_CLS_ACT
+-	skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS);
+-#endif
+ 	trace_net_dev_queue(skb);
+ 	if (q->enqueue) {
+ 		rc = __dev_xmit_skb(skb, q, dev, txq);
+@@ -3750,9 +3816,9 @@ int (*br_fdb_test_addr_hook)(struct net_
+ EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook);
+ #endif
+ 
+-static inline struct sk_buff *handle_ing(struct sk_buff *skb,
+-					 struct packet_type **pt_prev,
+-					 int *ret, struct net_device *orig_dev)
++static inline struct sk_buff *
++sch_handle_ingress(struct sk_buff *skb, struct packet_type **pt_prev, int *ret,
++		   struct net_device *orig_dev)
+ {
+ #ifdef CONFIG_NET_CLS_ACT
+ 	struct tcf_proto *cl = rcu_dereference_bh(skb->dev->ingress_cl_list);
+@@ -3974,7 +4040,7 @@ another_round:
+ skip_taps:
+ #ifdef CONFIG_NET_INGRESS
+ 	if (static_key_false(&ingress_needed)) {
+-		skb = handle_ing(skb, &pt_prev, &ret, orig_dev);
++		skb = sch_handle_ingress(skb, &pt_prev, &ret, orig_dev);
+ 		if (!skb)
+ 			goto out;
+ 
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -54,6 +54,9 @@ config COMPAT_NETLINK_MESSAGES
+ config NET_INGRESS
+ 	bool
+ 
++config NET_EGRESS
++	bool
++
+ menu "Networking options"
+ 
+ source "net/packet/Kconfig"
+--- a/net/sched/cls_bpf.c
++++ b/net/sched/cls_bpf.c
+@@ -291,7 +291,7 @@ static int cls_bpf_prog_from_efd(struct
+ 	prog->bpf_name = name;
+ 	prog->filter = fp;
+ 
+-	if (fp->dst_needed)
++	if (fp->dst_needed && !(tp->q->flags & TCQ_F_INGRESS))
+ 		netif_keep_dst(qdisc_dev(tp->q));
+ 
+ 	return 0;
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -342,15 +342,21 @@ config NET_SCH_PIE
+ 	  If unsure, say N.
+ 
+ config NET_SCH_INGRESS
+-	tristate "Ingress Qdisc"
++	tristate "Ingress/classifier-action Qdisc"
+ 	depends on NET_CLS_ACT
+ 	select NET_INGRESS
++	select NET_EGRESS
+ 	---help---
+-	  Say Y here if you want to use classifiers for incoming packets.
++	  Say Y here if you want to use classifiers for incoming and/or outgoing
++	  packets. This qdisc doesn't do anything else besides running classifiers,
++	  which can also have actions attached to them. In case of outgoing packets,
++	  classifiers that this qdisc holds are executed in the transmit path
++	  before real enqueuing to an egress qdisc happens.
++
+ 	  If unsure, say Y.
+ 
+-	  To compile this code as a module, choose M here: the
+-	  module will be called sch_ingress.
++	  To compile this code as a module, choose M here: the module will be
++	  called sch_ingress with alias of sch_clsact.
+ 
+ config NET_SCH_PLUG
+ 	tristate "Plug network traffic until release (PLUG)"
+--- a/net/sched/sch_ingress.c
++++ b/net/sched/sch_ingress.c
+@@ -1,4 +1,5 @@
+-/* net/sched/sch_ingress.c - Ingress qdisc
++/* net/sched/sch_ingress.c - Ingress and clsact qdisc
++ *
+  *              This program is free software; you can redistribute it and/or
+  *              modify it under the terms of the GNU General Public License
+  *              as published by the Free Software Foundation; either version
+@@ -98,17 +99,100 @@ static struct Qdisc_ops ingress_qdisc_op
+ 	.owner		=	THIS_MODULE,
+ };
+ 
++static unsigned long clsact_get(struct Qdisc *sch, u32 classid)
++{
++	switch (TC_H_MIN(classid)) {
++	case TC_H_MIN(TC_H_MIN_INGRESS):
++	case TC_H_MIN(TC_H_MIN_EGRESS):
++		return TC_H_MIN(classid);
++	default:
++		return 0;
++	}
++}
++
++static unsigned long clsact_bind_filter(struct Qdisc *sch,
++					unsigned long parent, u32 classid)
++{
++	return clsact_get(sch, classid);
++}
++
++static struct tcf_proto __rcu **clsact_find_tcf(struct Qdisc *sch,
++						unsigned long cl)
++{
++	struct net_device *dev = qdisc_dev(sch);
++
++	switch (cl) {
++	case TC_H_MIN(TC_H_MIN_INGRESS):
++		return &dev->ingress_cl_list;
++	case TC_H_MIN(TC_H_MIN_EGRESS):
++		return &dev->egress_cl_list;
++	default:
++		return NULL;
++	}
++}
++
++static int clsact_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	net_inc_ingress_queue();
++	net_inc_egress_queue();
++
++	sch->flags |= TCQ_F_CPUSTATS;
++
++	return 0;
++}
++
++static void clsact_destroy(struct Qdisc *sch)
++{
++	struct net_device *dev = qdisc_dev(sch);
++
++	tcf_destroy_chain(&dev->ingress_cl_list);
++	tcf_destroy_chain(&dev->egress_cl_list);
++
++	net_dec_ingress_queue();
++	net_dec_egress_queue();
++}
++
++static const struct Qdisc_class_ops clsact_class_ops = {
++	.leaf		=	ingress_leaf,
++	.get		=	clsact_get,
++	.put		=	ingress_put,
++	.walk		=	ingress_walk,
++	.tcf_chain	=	clsact_find_tcf,
++	.bind_tcf	=	clsact_bind_filter,
++	.unbind_tcf	=	ingress_put,
++};
++
++static struct Qdisc_ops clsact_qdisc_ops __read_mostly = {
++	.cl_ops		=	&clsact_class_ops,
++	.id		=	"clsact",
++	.init		=	clsact_init,
++	.destroy	=	clsact_destroy,
++	.dump		=	ingress_dump,
++	.owner		=	THIS_MODULE,
++};
++
+ static int __init ingress_module_init(void)
+ {
+-	return register_qdisc(&ingress_qdisc_ops);
++	int ret;
++
++	ret = register_qdisc(&ingress_qdisc_ops);
++	if (!ret) {
++		ret = register_qdisc(&clsact_qdisc_ops);
++		if (ret)
++			unregister_qdisc(&ingress_qdisc_ops);
++	}
++
++	return ret;
+ }
+ 
+ static void __exit ingress_module_exit(void)
+ {
+ 	unregister_qdisc(&ingress_qdisc_ops);
++	unregister_qdisc(&clsact_qdisc_ops);
+ }
+ 
+ module_init(ingress_module_init);
+ module_exit(ingress_module_exit);
+ 
++MODULE_ALIAS("sch_clsact");
+ MODULE_LICENSE("GPL");

feeds/ipq807x/kmod-sched-cake/Makefile

@@ -13,6 +13,7 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/dtaht/sch_cake.git
+PKG_MIRROR_HASH:=8bb4fa43368be5b5839a350419701b0bb3881b1641e037affea42630d75e56e6
 PKG_SOURCE_DATE:=2021-07-09
 PKG_SOURCE_VERSION:=d9e1398cc9091e9e7c7a740361e4617b75c24427
 #PKG_MIRROR_HASH:=5bf06a804824db36ae393fc174aeec7b12633176e05a765c0931b39df5bd34df

feeds/ipq807x/protobuf-c/Makefile

@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libprotobuf-c
-PKG_VERSION:=1.3.1
-PKG_RELEASE:=2
-
-PKG_SOURCE:=protobuf-c-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/protobuf-c/protobuf-c/releases/download/v$(PKG_VERSION)
-PKG_HASH:=51472d3a191d6d7b425e32b612e477c06f73fe23e07f6a6a839b11808e9d2267
-PKG_BUILD_DIR:=$(BUILD_DIR)/protobuf-c-$(PKG_VERSION)
-HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/protobuf-c-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Rosen Penev <rosenp@gmail.com>
-PKG_LICENSE:=BSD-2c
-
-PKG_BUILD_DEPENDS:=protobuf-c/host
-HOST_BUILD_DEPENDS:=protobuf/host
-
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/host-build.mk
-
-define Package/libprotobuf-c
-  TITLE:=Protocol Buffers library
-  SECTION:=libs
-  CATEGORY:=Libraries
-  URL:=https://github.com/protobuf-c/protobuf-c
-endef
-
-define Package/libprotobuf-c/description
-  Runtime library to use Google Protocol Buffers from C applications.
-  Protocol Buffers are a way of encoding structured data in an efficient yet
-  extensible format. Google uses Protocol Buffers for almost all of its
-  internal RPC protocols and file formats.
-endef
-
-CONFIGURE_ARGS += \
-	--enable-shared \
-	--enable-static \
-	--disable-protoc
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/* $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libprotobuf-c.{a,la,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/* $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libprotobuf-c/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libprotobuf-c.so.* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libprotobuf-c))
-$(eval $(call HostBuild))
-

feeds/ipq807x/protobuf-c/patches/001-t-generated-code2-cxx-generate-packed-data-fix.patch

@@ -1,13 +0,0 @@
-Index: protobuf-c-1.3.1/t/generated-code2/cxx-generate-packed-data.cc
-===================================================================
---- protobuf-c-1.3.1.orig/t/generated-code2/cxx-generate-packed-data.cc
-+++ protobuf-c-1.3.1/t/generated-code2/cxx-generate-packed-data.cc
-@@ -998,7 +998,7 @@ static void dump_test_packed_repeated_en
- static void dump_test_unknown_fields (void)
- {
-   EmptyMess mess;
--  const google::protobuf::Message::Reflection *reflection = mess.GetReflection();
-+  const google::protobuf::Reflection *reflection = mess.GetReflection();
-   google::protobuf::UnknownFieldSet *fs = reflection->MutableUnknownFields(&mess);
- 
- #if GOOGLE_PROTOBUF_VERSION >= 2001000

feeds/ipq807x/protobuf/Makefile

@@ -1,110 +0,0 @@
-#
-# Copyright (C) 2007-2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=protobuf
-PKG_VERSION:=3.7.1
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-cpp-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/google/protobuf/releases/download/v$(PKG_VERSION)
-PKG_HASH:=97f6cdaa0724d5a8cd3375d5f5cf4bd253d5ad5291154f533ed0d94a9d501ef3
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-PKG_CPE_ID:=cpe:/a:google:protobuf
-
-PKG_BUILD_DEPENDS:=protobuf/host
-
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/host-build.mk
-
-define Package/protobuf/Default
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A structured data encoding library
-  URL:=https://github.com/google/protobuf
-  DEPENDS:=+zlib +libpthread +libatomic +libstdcpp
-  MAINTAINER:=Ken Keys <kkeys@caida.org>
-endef
-
-define Package/protobuf
-  $(call Package/protobuf/Default)
-  DEPENDS+=+protobuf-lite
-endef
-
-define Package/protobuf-lite
-  $(call Package/protobuf/Default)
-endef
-
-define Package/protobuf/description/Default
-Protocol Buffers are a way of encoding structured data in an efficient
-yet extensible format. Google uses Protocol Buffers for almost all
-of its internal RPC protocols and file formats.
-endef
-
-define Package/protobuf/description
-$(call Package/protobuf/description/Default)
-
-This package provides the libprotoc, libprotobuf, and libprotobuf-lite
-libraries.  For a much smaller protobuf package, see "protobuf-lite".
-
-endef
-
-define Package/protobuf-lite/description
-$(call Package/protobuf/description/Default)
-
-This package provides the libprotobuf-lite library.
-
-endef
-
-EXTRA_CPPFLAGS+=-std=c++11
-CONFIGURE_ARGS += --with-protoc=$(STAGING_DIR_HOSTPKG)/bin/protoc
-
-define Build/InstallDev
-	$(INSTALL_DIR) \
-		$(1)/usr/lib \
-		$(1)/usr/include
-
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/include/* \
-		$(1)/usr/include/
-
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/* \
-		$(1)/usr/lib/
-endef
-
-define Package/protobuf-lite/install
-	$(INSTALL_DIR) \
-		$(1)/usr/lib
-
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libprotobuf-lite.so* \
-		$(1)/usr/lib/
-endef
-
-define Package/protobuf/install
-	$(INSTALL_DIR) \
-		$(1)/usr/lib
-
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libprotoc.so*  \
-		$(1)/usr/lib/
-
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libprotobuf.so* \
-		$(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,protobuf))
-$(eval $(call BuildPackage,protobuf-lite))
-$(eval $(call HostBuild))

feeds/ipq807x/qca-nss-clients/Makefile

@@ -6,6 +6,7 @@ PKG_SOURCE_PROTO:=git
 PKG_BRANCH:=master
 PKG_RELEASE:=2
 PKG_SOURCE_URL:=https://source.codeaurora.org/quic/qsdk/oss/lklm/nss-clients/
+PKG_MIRROR_HASH:=802bf8b2dac8da0549e108b873afd982d127370c07d6574ece71f902eafe7698
 PKG_VERSION:=153998d70fdba508a59a28c13a606032cbf32686
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz

feeds/ipq807x/qca-nss-drv/patches/200-napi_threaded.patch

@@ -0,0 +1,11 @@
+--- a/nss_hal/nss_hal.c
++++ b/nss_hal/nss_hal.c
+@@ -306,6 +306,8 @@ int nss_hal_probe(struct platform_device
+ 	 * Initialize the dummy netdevice.
+ 	 */
+ 	init_dummy_netdev(&nss_ctx->napi_ndev);
++	strcpy(nss_ctx->napi_ndev.name, "nss");
++	nss_ctx->napi_ndev.threaded = 1;
+ 
+ 	for (i = 0; i < npd->num_irq; i++) {
+ 		err = nss_hal_register_irq(nss_ctx, npd, &nss_ctx->napi_ndev, i);

feeds/tip/certificates/files/etc/init.d/certificates

@@ -7,12 +7,15 @@ boot() {
 	. /lib/functions.sh
 	mkdir -p /certificates /etc/ucentral/
 	local mtd=$(find_mtd_index certificates)
-	[ -n "$mtd" -a -f /sys/class/mtd/mtd$mtd/oobsize ] && ubiattach -p /dev/mtd$mtd
-	if [ -n "$(ubinfo -a | grep certificates)" ]; then
-		[ -e /dev/ubi0 ] && mount -t ubifs ubi0:certificates /certificates
-		[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
-	else
+	
+	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
 		mount -t squashfs /dev/mtdblock$mtd /certificates
+	else
+		[ -n "$mtd" -a -f /sys/class/mtd/mtd$mtd/oobsize ] && ubiattach -p /dev/mtd$mtd
+		if [ -n "$(ubinfo -a | grep certificates)" ]; then
+			[ -e /dev/ubi0 ] && mount -t ubifs ubi0:certificates /certificates
+			[ -e /dev/ubi1 ] && mount -t ubifs ubi1:certificates /certificates
+		fi
 	fi
 	[ -f /certificates/dev-id ] && {
 		cp /certificates/*.pem /etc/ucentral/

feeds/tip/certificates/files/lib/preinit/75_certificates

@@ -8,7 +8,7 @@ generate_certificate_volume() {
 	ubinfo /dev/ubi0 -N certificates > /dev/null
 	[ $? -eq 0 ] || {
 		ubirsvol /dev/ubi0 -N rootfs_data -s 20MiB
-		ubimkvol /dev/ubi0 -N certificates -s 2MiB
+		ubimkvol /dev/ubi0 -N certificates -S 20
 	}
 }
 

feeds/tip/maverick/files/usr/libexec/ucentral/maverick.sh

@@ -16,12 +16,14 @@ wifi config
 
 . /lib/functions.sh
 
+SUFFIX=$(uci get system.@system[0].hostname | tail -c 7 | tr a-f A-F | tr -d '\n')
+
 radio_enable() { 
 	uci set wireless.$1.disabled=0 
 } 
 
 ssid_set() { 
-	uci set wireless.$1.ssid='Maverick' 
+	uci set wireless.$1.ssid=Maverick-${SUFFIX}
 }
 
 delete_forwarding() {

feeds/ucentral/dynamic-vlan/Makefile

@@ -4,6 +4,7 @@ PKG_NAME:=dynamic-vlan
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/blogic/dynamic-vlan.git
+PKG_MIRROR_HASH:=448890cdf182bd1b47edffca242e607594d0d17f6f5017a6fd021aab79f3c351
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-06-04
 PKG_SOURCE_VERSION:=55d78d3e7215b601084980d922349bcfdcf9cf20

feeds/ucentral/ieee8021x/Makefile

@@ -7,6 +7,7 @@ PKG_LICENSE:=GPL-2.0
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 
 PKG_SOURCE_URL=https://github.com/blogic/ieee8021x.git
+PKG_MIRROR_HASH:=7e14e320714b4759f5c393f90165a69d133633612b57d408b3ab6535710bf53c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-04-12
 PKG_SOURCE_VERSION:=c1f36559dc0ed2deeac0531a3d5854f1955ae928

feeds/ucentral/qosify/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2008-2012 OpenWrt.org
+# Copyright (C) 2021 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,26 +9,31 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=qosify
-PKG_RELEASE:=1
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/qosify.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2022-03-06
+PKG_SOURCE_VERSION:=f13b67c9a786567df240a8f3f608e2724ddaadba
+PKG_MIRROR_HASH:=3d8629e711e46a6be79a46a6394165fd1761687f24b8ed954dc4f16f177cd90f
+PKG_RELEASE:=$(AUTORELEASE)
+
 PKG_LICENSE:=GPL-2.0
+PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_BUILD_DEPENDS:=bpf-headers
+PKG_FLAGS:=nonshared
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 include $(INCLUDE_DIR)/bpf.mk
+include $(INCLUDE_DIR)/nls.mk
 
 define Package/qosify
-  SECTION:=kernel
-  CATEGORY:=Kernel modules
-  SUBMENU:=Network Support
-  TITLE:=QoS classifier eBPF module
-  DEPENDS:=+libbpf +libubox +libubus +kmod-sched-cake +tc-full
-  PKGFLAGS+=nonshared
+  SECTION:=utils
+  CATEGORY:=Base system
+  TITLE:=A simple QoS solution based eBPF + CAKE
+  DEPENDS:=+libbpf +libubox +libubus +kmod-sched-cake +kmod-sched-bpf +kmod-ifb +tc-full $(BPF_DEPENDS)
 endef
 
-BPF_DOC = $(wildcard $(patsubst %,$(BPF_HEADERS_DIR)/scripts/%.py,bpf_doc bpf_helpers_doc))
-
 define Build/Compile
 	$(call CompileBPF,$(PKG_BUILD_DIR)/qosify-bpf.c)
 	$(Build/Compile/Default)
@@ -36,17 +41,28 @@ endef
 
 define Package/qosify/conffiles
 /etc/config/qosify
-/etc/qosify-defaults.conf
+/etc/qosify/00-defaults.conf
 endef
 
 define Package/qosify/install
-	$(INSTALL_DIR) $(1)/lib/bpf $(1)/usr/sbin $(1)/etc/init.d $(1)/etc/config $(1)/etc/hotplug.d/net
+	$(INSTALL_DIR) \
+		$(1)/lib/bpf \
+		$(1)/usr/sbin \
+		$(1)/etc/init.d \
+		$(1)/etc/config \
+		$(1)/etc/qosify \
+		$(1)/etc/hotplug.d/net \
+		$(1)/etc/hotplug.d/iface
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/qosify-bpf.o $(1)/lib/bpf
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/qosify $(1)/usr/sbin/
+	$(INSTALL_BIN) \
+		$(PKG_INSTALL_DIR)/usr/bin/qosify \
+		./files/qosify-status \
+		$(1)/usr/sbin/
 	$(INSTALL_BIN) ./files/qosify.init $(1)/etc/init.d/qosify
-	$(INSTALL_DATA) ./files/qosify-defaults.conf $(1)/etc/qosify-defaults.conf
+	$(INSTALL_DATA) ./files/qosify-defaults.conf $(1)/etc/qosify/00-defaults.conf
 	$(INSTALL_DATA) ./files/qosify.conf $(1)/etc/config/qosify
 	$(INSTALL_DATA) ./files/qosify.hotplug $(1)/etc/hotplug.d/net/10-qosify
+	$(INSTALL_DATA) ./files/qosify.hotplug $(1)/etc/hotplug.d/iface/10-qosify
 endef
 
 $(eval $(call BuildPackage,qosify))

feeds/ucentral/qosify/files/qosify-defaults.conf

@@ -1,17 +1,17 @@
 # DNS
-tcp:53		CS5
-tcp:5353	CS5
-udp:53		CS5
-udp:5353	CS5
+tcp:53		voice
+tcp:5353	voice
+udp:53		voice
+udp:5353	voice
 
 # NTP
-udp:123		CS6
+udp:123		voice
 
 # SSH
-tcp:22		+CS4
+tcp:22		+video
 
 # HTTP/QUIC
-tcp:80		+CS3
-tcp:443		+CS3
-udp:80		+CS3
-udp:443		+CS3
+tcp:80		+besteffort
+tcp:443		+besteffort
+udp:80		+besteffort
+udp:443		+besteffort

feeds/ucentral/qosify/files/qosify-status

@@ -0,0 +1,70 @@
+#!/bin/sh
+. /usr/share/libubox/jshn.sh
+
+dev_status() {
+	tc -s qdisc sh dev "$1" root
+	echo
+}
+
+common_status() {
+	json_get_vars ifname ingress egress
+
+	[ -n "$ifname" ] || return
+
+	[ "$egress" -gt 0 ] && {
+		echo "egress status:"
+		dev_status "$ifname"
+	}
+	[ "$ingress" -gt 0 ] && {
+		echo "ingress status:"
+		dev_status "$(printf %.16s "ifb-$ifname")"
+	}
+}
+
+is_active() {
+	json_get_vars active
+
+	[ "${active:-0}" -gt 0 ]
+}
+
+device_status() {
+	local name="$2"
+
+	json_select "$name"
+
+	if is_active; then
+		status="active"
+	else
+		status="not found"
+	fi
+
+	echo "===== device $name: $status ====="
+
+	is_active && common_status
+
+	json_select ..
+}
+
+interface_status() {
+	local name="$2"
+
+	json_select "$name"
+
+	if is_active; then
+		status="active"
+	elif ubus -S -t 0 wait_for "network.interface.$name"; then
+		status="down"
+	else
+		status="not found"
+	fi
+
+	echo "===== interface $name: $status ====="
+
+	is_active && common_status
+
+	json_select ..
+}
+
+json_load "$(ubus call qosify status)"
+json_for_each_item device_status devices
+json_for_each_item interface_status interfaces

feeds/ucentral/qosify/files/qosify.conf

@@ -1,24 +1,42 @@
 config defaults
-	list defaults /etc/qosify-defaults.conf
-	option dscp_prio CS5
-	option dscp_icmp CS6
-	option dscp_bulk CS0
-	option dscp_default_udp	CS4
-	option bulk_trigger_timeout 5
-	option bulk_trigger_pps	100
+	list defaults /etc/qosify/*.conf
+	option dscp_prio video
+	option dscp_icmp +besteffort
+	option dscp_default_udp besteffort
 	option prio_max_avg_pkt_len 500
 
+config class besteffort
+	option ingress CS0
+	option egress CS0
+
+config class bulk
+	option ingress LE
+	option egress LE
+
+config class video
+	option ingress AF41
+	option egress AF41
+
+config class voice
+	option ingress CS6
+	option egress CS6
+	option bulk_trigger_pps 100
+	option bulk_trigger_timeout 5
+	option dscp_bulk CS0
+
 config interface wan
 	option name wan
 	option disabled 1
 	option bandwidth_up 100mbit
 	option bandwidth_down 100mbit
+	option overhead_type none
 	# defaults:
 	option ingress 1
 	option egress 1
 	option mode diffserv4
+	option nat 1
 	option host_isolate 1
-	option autorate_ingress 1
+	option autorate_ingress 0
 	option ingress_options ""
 	option egress_options ""
 	option options ""

feeds/ucentral/qosify/files/qosify.init

@@ -1,5 +1,5 @@
 #!/bin/sh /etc/rc.common
-# Copyright (c) 2014 OpenWrt.org
+# Copyright (c) 2021 OpenWrt.org
 
 START=19
 
@@ -15,6 +15,16 @@ add_option() {
 	[ -n "$val" ] && json_add_$type "$name" "$val"
 }
 
+add_flow_config() {
+	local cfg="$1"
+
+	add_option string dscp_prio
+	add_option string dscp_bulk
+	add_option int bulk_trigger_timeout
+	add_option int bulk_trigger_pps
+	add_option int prio_max_avg_pkt_len
+}
+
 add_defaults() {
 	cfg="$1"
 
@@ -27,15 +37,11 @@ add_defaults() {
 	done
 	json_close_array
 
+	add_flow_config "$cfg"
 	add_option int timeout
-	add_option string dscp_prio
-	add_option string dscp_bulk
 	add_option string dscp_icmp
 	add_option string dscp_default_udp
 	add_option string dscp_default_tcp
-	add_option int bulk_trigger_timeout 
-	add_option int bulk_trigger_pps
-	add_option int prio_max_avg_pkt_len
 }
 
 add_interface() {
@@ -57,19 +63,74 @@ add_interface() {
 	bw_down="${bw_down:-$bw}"
 	[ -n "$bw_down" ] && json_add_string bandwidth_down "$bw_down"
 
-	add_option string bandwidth 
+	add_option string bandwidth
 	add_option boolean ingress
 	add_option boolean egress
 	add_option string mode
-	add_option boolean host_isolate 
+	add_option boolean nat
+	add_option boolean host_isolate
 	add_option boolean autorate_ingress
 	add_option string ingress_options
 	add_option string egress_options
-	add_option string options
+
+	config_get user_options "$cfg" options
+
+	config_get otype "$cfg" overhead_type
+	options=
+	case "$otype" in
+		none);;
+		manual)
+			config_get overhead "$cfg" overhead
+			[ -n "$overhead" ] && append options "overhead $overhead"
+
+			config_get encap "$cfg" overhead_encap
+			[ -n "$encap" ] && append options "$encap"
+		;;
+		conservative|\
+		pppoa-vcmux|\
+		pppoa-llc|\
+		pppoe-vcmux|\
+		pppoe-llcsnap|\
+		bridged-vcmux|\
+		bridged-llcsnap|\
+		ipoa-vcmux|\
+		ipoa-llcsnap|\
+		pppoe-ptm|\
+		bridged-ptm|\
+		docsis|\
+		ethernet)
+			append options "$otype"
+		;;
+	esac
+
+	config_get mpu "$cfg" overhead_mpu
+	[ -n "$mpu" ] && append options "mpu $mpu"
+
+	config_get ovlan "$cfg" overhead_vlan
+	[ "${ovlan:-0}" -ge 2 ] && append options "ether-vlan"
+	[ "${ovlan:-0}" -ge 1 ] && append options "ether-vlan"
+
+	[ -n "$user_options" ] && append options "$user_options"
+	[ -n "$options" ] && json_add_string options "$options"
 
 	json_close_object
 }
 
+add_class() {
+	local cfg="$1"
+
+	config_get value "$cfg" value
+	config_get ingress "$cfg" ingress
+	config_get egress "$cfg" egress
+
+	json_add_object "$cfg"
+	json_add_string ingress "${ingress:-$value}"
+	json_add_string egress "${egress:-$value}"
+	add_flow_config "$cfg"
+	json_close_object
+}
+
+
 reload_service() {
 	json_init
 
@@ -81,6 +142,11 @@ reload_service() {
 	config_foreach add_interface interface
 	json_close_object
 
+	json_add_object classes
+	config_foreach add_class class
+	config_foreach add_class alias
+	json_close_object
+
 	json_add_object devices
 	config_foreach add_interface device
 	json_close_object

feeds/ucentral/qosify/src/CMakeLists.txt

@@ -1,15 +0,0 @@
-cmake_minimum_required(VERSION 3.10)
-
-PROJECT(qosify C)
-
-ADD_DEFINITIONS(-Os -Wall -Wno-unknown-warning-option -Wno-array-bounds -Wno-format-truncation -Werror --std=gnu99)
-
-SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
-
-find_library(bpf NAMES bpf)
-ADD_EXECUTABLE(qosify main.c loader.c map.c ubus.c interface.c)
-TARGET_LINK_LIBRARIES(qosify ${bpf} ubox ubus)
-
-INSTALL(TARGETS qosify
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)

feeds/ucentral/qosify/src/README

@@ -1,112 +0,0 @@
-QoSify is simple daemon for setting up and managing CAKE along with a custom
-eBPF based classifier that sets DSCP fields of packets.
-
-It supports the following features:
-- simple TCP/UDP port based mapping
-- IP address based mapping
-- priority boosting based on average packet size
-- bulk flow detection based on number of packets per second
-- dynamically add IP entries with timeout
-- dns regex entries and ubus api for providing dns lookup results
-
-It can be configured via ubus call qosify config.
-
-This call supports the following parameters:
-- "reset": BOOL
-	Reset the config to defaults instead of only updating supplied values
-
-- "files": ARRAY of STRING
-	List of files with port/IP/host mappings
-
-- "timeout": INT32
-	Default timeout for dynamically added entries
-
-- "dscp_default_udp": STRING
-	Default DSCP value for UDP packets
-
-- "dscp_default_tcp": STRING
-	Default DSCP value for TCP packets
-
-- "dscp_prio": STRING
-	DSCP value for priority-marked packets
-
-- "dscp_bulk": STRING
-	DSCP value for bulk-marked packets
-
-- "dscp_icmp": STRING
-	DSCP value for ICMP packets
-
-- "bulk_trigger_pps": INT32
-	Number of packets per second to trigger bulk flow detection
-
-- "bulk_trigger_timeout": INT32
-	Time below bulk_trigger_pps threshold until a bulk flow mark is removed
-
-- "prio_max_avg_pkt_len": INT32
-	Maximum average packet length for marking a flow as priority
-
-- "interfaces": TABLE of TABLE
-	netifd interfaces to enable QoS on
-
-- "devices": TABLE of TABLE
-	netdevs to enable QoS on
-
-
-interface/device properties:
-- "bandwidth_up": STRING
-	Uplink bandwidth (same format as tc)
-
-- "bandwidth_down": STRING
-	Downlink bandwidth (same format as tc)
-
-- "ingress": BOOL
-	Enable ingress shaping
-
-- "egress": BOOL
-	Enable egress shaping
-
-- "mode": STRING
-	CAKE diffserv mode
-
-- "nat": BOOL
-	Enable CAKE NAT host detection via conntrack
-
-- "host_isolate": BOOL
-	Enable CAKE host isolation
-
-- "autorate_ingress": BOOL
-	Enable CAKE automatic rate estimation for ingress
-
-- "ingress_options": STRING
-	CAKE ingress options
-
-- "egress_options": STRING
-	CAKE egress options
-
-- "options": STRING
-	CAKE options for ingress + egress
-
-
-Mapping file syntax:
-
-Each line has two whitespace separated fields, match and dscp
-match is one of:
-- tcp:<port>[-<endport>]
-	TCP single port, or range from <port> to <endport>
-- udp:<port>[-<endport>]
-	UDP single port, or range from <port> to <endport>
-- <ipaddr>
-	IPv4 address, e.g. 1.1.1.1
-- <ipv6addr>
-	IPv6 address, e.g. ff01::1
-- dns:<regex>
-	POSIX.2 extended regular expression for matching hostnames
-	Only works, if dns lookups are passed to qosify via the add_dns_host ubus call.
-
-dscp can be a raw value, or a codepoint like CS0
-Adding a + in front of the value tells qosify to only override the DSCP value if it is zero
-
-
-Planned features:
-- Integration with dnsmasq to support hostname pattern based DSCP marking
-- Support for LAN host based priority

feeds/ucentral/qosify/src/interface.c

@@ -1,563 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/wait.h>
-#include <sys/ioctl.h>
-#include <net/if_arp.h>
-#include <net/if.h>
-
-#include <unistd.h>
-#include <errno.h>
-
-#include <libubox/vlist.h>
-#include <libubox/avl-cmp.h>
-#include <libubox/uloop.h>
-
-#include "qosify.h"
-
-static void interface_update_cb(struct vlist_tree *tree,
-				struct vlist_node *node_new,
-				struct vlist_node *node_old);
-
-static VLIST_TREE(devices, avl_strcmp, interface_update_cb, true, false);
-static VLIST_TREE(interfaces, avl_strcmp, interface_update_cb, true, false);
-static int socket_fd;
-
-#define APPEND(_buf, _ofs, _format, ...) _ofs += snprintf(_buf + _ofs, sizeof(_buf) - _ofs, _format, ##__VA_ARGS__)
-
-struct qosify_iface_config {
-	struct blob_attr *data;
-
-	bool ingress;
-	bool egress;
-	bool nat;
-	bool host_isolate;
-	bool autorate_ingress;
-
-	const char *bandwidth_up;
-	const char *bandwidth_down;
-	const char *mode;
-	const char *common_opts;
-	const char *ingress_opts;
-	const char *egress_opts;
-};
-
-
-struct qosify_iface {
-	struct vlist_node node;
-
-	char ifname[IFNAMSIZ];
-	bool active;
-
-	bool device;
-	struct blob_attr *config_data;
-	struct qosify_iface_config config;
-};
-
-enum {
-	IFACE_ATTR_BW_UP,
-	IFACE_ATTR_BW_DOWN,
-	IFACE_ATTR_INGRESS,
-	IFACE_ATTR_EGRESS,
-	IFACE_ATTR_MODE,
-	IFACE_ATTR_NAT,
-	IFACE_ATTR_HOST_ISOLATE,
-	IFACE_ATTR_AUTORATE_IN,
-	IFACE_ATTR_INGRESS_OPTS,
-	IFACE_ATTR_EGRESS_OPTS,
-	IFACE_ATTR_OPTS,
-	__IFACE_ATTR_MAX
-};
-
-static inline const char *qosify_iface_name(struct qosify_iface *iface)
-{
-	return iface->node.avl.key;
-}
-
-static void
-iface_config_parse(struct blob_attr *attr, struct blob_attr **tb)
-{
-	static const struct blobmsg_policy policy[__IFACE_ATTR_MAX] = {
-		[IFACE_ATTR_BW_UP] = { "bandwidth_up", BLOBMSG_TYPE_STRING },
-		[IFACE_ATTR_BW_DOWN] = { "bandwidth_down", BLOBMSG_TYPE_STRING },
-		[IFACE_ATTR_INGRESS] = { "ingress", BLOBMSG_TYPE_BOOL },
-		[IFACE_ATTR_EGRESS] = { "egress", BLOBMSG_TYPE_BOOL },
-		[IFACE_ATTR_MODE] = { "mode", BLOBMSG_TYPE_STRING },
-		[IFACE_ATTR_NAT] = { "nat", BLOBMSG_TYPE_BOOL },
-		[IFACE_ATTR_HOST_ISOLATE] = { "host_isolate", BLOBMSG_TYPE_BOOL },
-		[IFACE_ATTR_AUTORATE_IN] = { "autorate_ingress", BLOBMSG_TYPE_BOOL },
-		[IFACE_ATTR_INGRESS_OPTS] = { "ingress_options", BLOBMSG_TYPE_STRING },
-		[IFACE_ATTR_EGRESS_OPTS] = { "egress_options", BLOBMSG_TYPE_STRING },
-		[IFACE_ATTR_OPTS] = { "options", BLOBMSG_TYPE_STRING },
-	};
-
-	blobmsg_parse(policy, __IFACE_ATTR_MAX, tb, blobmsg_data(attr), blobmsg_len(attr));
-}
-
-static bool
-iface_config_equal(struct qosify_iface *if1, struct qosify_iface *if2)
-{
-	struct blob_attr *tb1[__IFACE_ATTR_MAX], *tb2[__IFACE_ATTR_MAX];
-	int i;
-
-	iface_config_parse(if1->config_data, tb1);
-	iface_config_parse(if2->config_data, tb2);
-
-	for (i = 0; i < __IFACE_ATTR_MAX; i++) {
-		if (!!tb1[i] != !!tb2[i])
-			return false;
-
-		if (!tb1[i])
-			continue;
-
-		if (blob_raw_len(tb1[i]) != blob_raw_len(tb2[i]))
-			return false;
-
-		if (memcmp(tb1[i], tb2[i], blob_raw_len(tb1[i])) != 0)
-			return false;
-	}
-
-	return true;
-}
-
-static const char *check_str(struct blob_attr *attr)
-{
-	const char *str = blobmsg_get_string(attr);
-
-	if (strchr(str, '\''))
-		return NULL;
-
-	return str;
-}
-
-static void
-iface_config_set(struct qosify_iface *iface, struct blob_attr *attr)
-{
-	struct qosify_iface_config *cfg = &iface->config;
-	struct blob_attr *tb[__IFACE_ATTR_MAX];
-	struct blob_attr *cur;
-
-	iface_config_parse(attr, tb);
-
-	memset(cfg, 0, sizeof(*cfg));
-
-	/* defaults */
-	cfg->mode = "diffserv4";
-	cfg->ingress = true;
-	cfg->egress = true;
-	cfg->host_isolate = true;
-	cfg->autorate_ingress = true;
-	cfg->nat = !iface->device;
-
-	if ((cur = tb[IFACE_ATTR_BW_UP]) != NULL)
-		cfg->bandwidth_up = check_str(cur);
-	if ((cur = tb[IFACE_ATTR_BW_DOWN]) != NULL)
-		cfg->bandwidth_down = check_str(cur);
-	if ((cur = tb[IFACE_ATTR_MODE]) != NULL)
-		cfg->mode = check_str(cur);
-	if ((cur = tb[IFACE_ATTR_OPTS]) != NULL)
-		cfg->common_opts = check_str(cur);
-	if ((cur = tb[IFACE_ATTR_EGRESS_OPTS]) != NULL)
-		cfg->egress_opts = check_str(cur);
-	if ((cur = tb[IFACE_ATTR_INGRESS_OPTS]) != NULL)
-		cfg->ingress_opts = check_str(cur);
-	if ((cur = tb[IFACE_ATTR_INGRESS]) != NULL)
-		cfg->ingress = blobmsg_get_bool(cur);
-	if ((cur = tb[IFACE_ATTR_EGRESS]) != NULL)
-		cfg->egress = blobmsg_get_bool(cur);
-	if ((cur = tb[IFACE_ATTR_NAT]) != NULL)
-		cfg->nat = blobmsg_get_bool(cur);
-	if ((cur = tb[IFACE_ATTR_HOST_ISOLATE]) != NULL)
-		cfg->host_isolate = blobmsg_get_bool(cur);
-	if ((cur = tb[IFACE_ATTR_AUTORATE_IN]) != NULL)
-		cfg->autorate_ingress = blobmsg_get_bool(cur);
-}
-
-static const char *
-interface_ifb_name(struct qosify_iface *iface)
-{
-	static char ifname[IFNAMSIZ + 1] = "ifb-";
-	int len = strlen(iface->ifname);
-
-	if (len + 4 < IFNAMSIZ) {
-		snprintf(ifname + 4, IFNAMSIZ - 4, "%s", iface->ifname);
-
-		return ifname;
-	}
-
-	ifname[4] = iface->ifname[0];
-	ifname[5] = iface->ifname[1];
-	snprintf(ifname + 6, IFNAMSIZ - 6, "%s", iface->ifname + len - (IFNAMSIZ + 6) - 1);
-
-	return ifname;
-}
-
-static int run_cmd(char *cmd, bool ignore)
-{
-	char *argv[] = { "sh", "-c", cmd, NULL };
-	bool first = true;
-	int status = -1;
-	char buf[512];
-	int fds[2];
-	FILE *f;
-	int pid;
-
-	if (pipe(fds))
-		return -1;
-
-	pid = fork();
-	if (!pid) {
-		close(fds[0]);
-		if (fds[1] != STDOUT_FILENO)
-			dup2(fds[1], STDOUT_FILENO);
-		if (fds[1] != STDERR_FILENO)
-			dup2(fds[1], STDERR_FILENO);
-		if (fds[1] > STDERR_FILENO)
-			close(fds[1]);
-		execv("/bin/sh", argv);
-		exit(1);
-	}
-
-	if (pid < 0)
-		return -1;
-
-	close(fds[1]);
-	f = fdopen(fds[0], "r");
-	if (!f) {
-		close(fds[0]);
-		goto out;
-	}
-
-	while (fgets(buf, sizeof(buf), f) != NULL) {
-		if (!strlen(buf))
-			break;
-		if (ignore)
-			continue;
-		if (first) {
-			ULOG_WARN("Command: %s\n", cmd);
-			first = false;
-		}
-		ULOG_WARN("%s%s", buf, strchr(buf, '\n') ? "" : "\n");
-	}
-
-	fclose(f);
-
-out:
-	while (waitpid(pid, &status, 0) < 0)
-		if (errno != EINTR)
-			break;
-
-	return status;
-}
-
-static int
-prepare_tc_cmd(char *buf, int len, const char *type, const char *cmd,
-	       const char *dev, const char *extra)
-{
-	return snprintf(buf, len, "tc %s %s dev '%s' %s", type, cmd, dev, extra);
-}
-
-static int
-cmd_del_qdisc(const char *ifname, const char *type)
-{
-	char buf[64];
-
-	prepare_tc_cmd(buf, sizeof(buf), "qdisc", "del", ifname, type);
-
-	return run_cmd(buf, true);
-}
-
-static int
-cmd_add_qdisc(struct qosify_iface *iface, const char *ifname, bool egress, bool eth)
-{
-	struct qosify_iface_config *cfg = &iface->config;
-	const char *bw = egress ? cfg->bandwidth_up : cfg->bandwidth_down;
-	const char *dir_opts = egress ? cfg->egress_opts : cfg->ingress_opts;
-	char buf[512];
-	int ofs;
-
-	cmd_del_qdisc(ifname, "root");
-
-	ofs = prepare_tc_cmd(buf, sizeof(buf), "qdisc", "add", ifname, "root handle 1: cake");
-	if (bw)
-		APPEND(buf, ofs, " bandwidth %s", bw);
-
-	APPEND(buf, ofs, " %s %sgress", cfg->mode, egress ? "e" : "in");
-
-	if (cfg->host_isolate)
-		APPEND(buf, ofs, " %snat dual-%shost",
-			cfg->nat ? "" : "no",
-			egress ? "src" : "dst");
-	else
-		APPEND(buf, ofs, " flows");
-
-	APPEND(buf, ofs, " %s %s",
-	       cfg->common_opts ? cfg->common_opts : "",
-	       dir_opts ? dir_opts : "");
-
-	run_cmd(buf, false);
-
-	ofs = prepare_tc_cmd(buf, sizeof(buf), "filter", "add", ifname, "parent 1: bpf");
-	APPEND(buf, ofs, " object-pinned /sys/fs/bpf/qosify_%sgress_%s verbose direct-action",
-	       egress ? "e" : "in",
-		   eth ? "eth" : "ip");
-
-	return run_cmd(buf, false);
-}
-
-static int
-cmd_del_ingress(struct qosify_iface *iface)
-{
-	char buf[256];
-
-	cmd_del_qdisc(iface->ifname, "handle ffff: ingress");
-	snprintf(buf, sizeof(buf), "ip link del '%s'", interface_ifb_name(iface));
-
-	return run_cmd(buf, true);
-}
-
-
-static int
-cmd_add_ingress(struct qosify_iface *iface, bool eth)
-{
-	const char *ifbdev = interface_ifb_name(iface);
-	char buf[256];
-	int ofs;
-
-	cmd_del_ingress(iface);
-
-	ofs = prepare_tc_cmd(buf, sizeof(buf), "qdisc", "add", iface->ifname, " handle ffff: ingress");
-	run_cmd(buf, false);
-
-	snprintf(buf, sizeof(buf), "ip link add '%s' type ifb", ifbdev);
-	run_cmd(buf, false);
-
-	cmd_add_qdisc(iface, ifbdev, false, eth);
-
-	snprintf(buf, sizeof(buf), "ip link set dev '%s' up", ifbdev);
-	run_cmd(buf, false);
-
-	ofs = prepare_tc_cmd(buf, sizeof(buf), "filter", "add", iface->ifname, " parent ffff:");
-	APPEND(buf, ofs, " protocol all prio 10 u32 match u32 0 0 "
-			 "flowid 1:1 action mirred egress redirect dev '%s'", ifbdev);
-	return run_cmd(buf, false);
-}
-
-static void
-interface_start(struct qosify_iface *iface)
-{
-	struct ifreq ifr = {};
-	bool eth;
-
-	if (!iface->ifname[0] || iface->active)
-		return;
-
-	ULOG_INFO("start interface %s\n", iface->ifname);
-
-	strncpy(ifr.ifr_name, iface->ifname, sizeof(ifr.ifr_name));
-	if (ioctl(socket_fd, SIOCGIFHWADDR, &ifr) < 0) {
-		ULOG_ERR("ioctl(SIOCGIFHWADDR, %s) failed: %s\n", iface->ifname, strerror(errno));
-		return;
-	}
-
-	eth = ifr.ifr_hwaddr.sa_family == ARPHRD_ETHER;
-
-	if (iface->config.egress)
-		cmd_add_qdisc(iface, iface->ifname, true, eth);
-	if (iface->config.ingress)
-		cmd_add_ingress(iface, eth);
-
-	iface->active = true;
-}
-
-static void
-interface_stop(struct qosify_iface *iface)
-{
-	if (!iface->ifname[0] || !iface->active)
-		return;
-
-	ULOG_INFO("stop interface %s\n", iface->ifname);
-	iface->active = false;
-
-	if (iface->config.egress)
-		cmd_del_qdisc(iface->ifname, "root");
-	if (iface->config.ingress)
-		cmd_del_ingress(iface);
-}
-
-static void
-interface_set_config(struct qosify_iface *iface, struct blob_attr *config)
-{
-	iface->config_data = blob_memdup(config);
-	iface_config_set(iface, iface->config_data);
-	interface_start(iface);
-}
-
-static void
-interface_update_cb(struct vlist_tree *tree,
-		    struct vlist_node *node_new, struct vlist_node *node_old)
-{
-	struct qosify_iface *if_new = NULL, *if_old = NULL;
-
-	if (node_new)
-		if_new = container_of(node_new, struct qosify_iface, node);
-	if (node_old)
-		if_old = container_of(node_old, struct qosify_iface, node);
-
-	if (if_new && if_old) {
-		if (!iface_config_equal(if_old, if_new)) {
-			interface_stop(if_old);
-			free(if_old->config_data);
-			interface_set_config(if_old, if_new->config_data);
-		}
-
-		free(if_new);
-		return;
-	}
-
-	if (if_old) {
-		interface_stop(if_old);
-		free(if_old->config_data);
-		free(if_old);
-	}
-
-	if (if_new)
-		interface_set_config(if_new, if_new->config_data);
-}
-
-static void
-interface_create(struct blob_attr *attr, bool device)
-{
-	struct qosify_iface *iface;
-	const char *name = blobmsg_name(attr);
-	int name_len = strlen(name);
-	char *name_buf;
-
-	if (strchr(name, '\''))
-		return;
-
-	if (name_len >= IFNAMSIZ)
-		return;
-
-	if (blobmsg_type(attr) != BLOBMSG_TYPE_TABLE)
-		return;
-
-	iface = calloc_a(sizeof(*iface), &name_buf, name_len + 1);
-	strcpy(name_buf, blobmsg_name(attr));
-	iface->config_data = attr;
-	iface->device = device;
-	vlist_add(device ? &devices : &interfaces, &iface->node, name_buf);
-}
-
-void qosify_iface_config_update(struct blob_attr *ifaces, struct blob_attr *devs)
-{
-	struct blob_attr *cur;
-	int rem;
-
-	vlist_update(&devices);
-	blobmsg_for_each_attr(cur, devs, rem)
-		interface_create(cur, true);
-	vlist_flush(&devices);
-
-	vlist_update(&interfaces);
-	blobmsg_for_each_attr(cur, ifaces, rem)
-		interface_create(cur, false);
-	vlist_flush(&interfaces);
-}
-
-static void
-qosify_iface_check_device(struct qosify_iface *iface)
-{
-	const char *name = qosify_iface_name(iface);
-	int ifindex;
-
-	ifindex = if_nametoindex(name);
-	if (!ifindex) {
-		interface_stop(iface);
-		iface->ifname[0] = 0;
-	} else {
-		snprintf(iface->ifname, sizeof(iface->ifname), "%s", name);
-		interface_start(iface);
-	}
-}
-
-static void
-qosify_iface_check_interface(struct qosify_iface *iface)
-{
-	const char *name = qosify_iface_name(iface);
-	char ifname[IFNAMSIZ];
-
-	if (qosify_ubus_check_interface(name, ifname, sizeof(ifname)) == 0) {
-		snprintf(iface->ifname, sizeof(iface->ifname), "%s", ifname);
-		interface_start(iface);
-	} else {
-		interface_stop(iface);
-		iface->ifname[0] = 0;
-	}
-}
-
-static void qos_iface_check_cb(struct uloop_timeout *t)
-{
-	struct qosify_iface *iface;
-
-	vlist_for_each_element(&devices, iface, node)
-		qosify_iface_check_device(iface);
-	vlist_for_each_element(&interfaces, iface, node)
-		qosify_iface_check_interface(iface);
-}
-
-void qosify_iface_check(void)
-{
-	static struct uloop_timeout timer = {
-		.cb = qos_iface_check_cb,
-	};
-
-	uloop_timeout_set(&timer, 10);
-}
-
-void qosify_iface_status(struct blob_buf *b)
-{
-	struct qosify_iface *iface;
-	void *c, *i;
-
-	c = blobmsg_open_table(b, "devices");
-	vlist_for_each_element(&devices, iface, node) {
-		i = blobmsg_open_table(b, qosify_iface_name(iface));
-		blobmsg_add_u8(b, "active", iface->active);
-		blobmsg_close_table(b, i);
-	}
-	blobmsg_close_table(b, c);
-
-	c = blobmsg_open_table(b, "interfaces");
-	vlist_for_each_element(&interfaces, iface, node) {
-		i = blobmsg_open_table(b, qosify_iface_name(iface));
-		blobmsg_add_u8(b, "active", iface->active);
-		if (iface->ifname)
-			blobmsg_add_string(b, "ifname", iface->ifname);
-		blobmsg_close_table(b, i);
-	}
-	blobmsg_close_table(b, c);
-}
-
-int qosify_iface_init(void)
-{
-	socket_fd = socket(AF_UNIX, SOCK_DGRAM, 0);
-	if (socket < 0)
-		return -1;
-
-	return 0;
-}
-
-void qosify_iface_stop(void)
-{
-	struct qosify_iface *iface;
-
-	vlist_for_each_element(&interfaces, iface, node)
-		interface_stop(iface);
-	vlist_for_each_element(&devices, iface, node)
-		interface_stop(iface);
-}
-

feeds/ucentral/qosify/src/loader.c

@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <arpa/inet.h>
-#include <glob.h>
-#include <unistd.h>
-
-#include "qosify.h"
-
-static int qosify_bpf_pr(enum libbpf_print_level level, const char *format,
-		     va_list args)
-{
-	return vfprintf(stderr, format, args);
-}
-
-static void qosify_init_env(void)
-{
-	struct rlimit limit = {
-		.rlim_cur = RLIM_INFINITY,
-		.rlim_max = RLIM_INFINITY,
-	};
-
-	setrlimit(RLIMIT_MEMLOCK, &limit);
-}
-
-static void qosify_fill_rodata(struct bpf_object *obj, uint32_t flags)
-{
-	struct bpf_map *map = NULL;
-
-	while ((map = bpf_map__next(map, obj)) != NULL) {
-		if (!strstr(bpf_map__name(map), ".rodata"))
-			continue;
-
-		bpf_map__set_initial_value(map, &flags, sizeof(flags));
-	}
-}
-
-static int
-qosify_create_program(const char *suffix, uint32_t flags)
-{
-	DECLARE_LIBBPF_OPTS(bpf_object_open_opts, opts,
-		.pin_root_path = CLASSIFY_DATA_PATH,
-	);
-	struct bpf_program *prog;
-	struct bpf_object *obj;
-	char path[256];
-	int err;
-
-	snprintf(path, sizeof(path), CLASSIFY_PIN_PATH "_" "%s", suffix);
-
-	obj = bpf_object__open_file(CLASSIFY_PROG_PATH, &opts);
-	err = libbpf_get_error(obj);
-	if (err) {
-		perror("bpf_object__open_file");
-		return -1;
-	}
-
-	prog = bpf_object__find_program_by_title(obj, "classifier");
-	if (!prog) {
-		fprintf(stderr, "Can't find classifier prog\n");
-		return -1;
-	}
-
-	bpf_program__set_type(prog, BPF_PROG_TYPE_SCHED_CLS);
-
-	qosify_fill_rodata(obj, flags);
-
-	err = bpf_object__load(obj);
-	if (err) {
-		perror("bpf_object__load");
-		return -1;
-	}
-
-	libbpf_set_print(NULL);
-
-	unlink(path);
-	err = bpf_program__pin(prog, path);
-	if (err) {
-		fprintf(stderr, "Failed to pin program to %s: %s\n",
-			path, strerror(-err));
-	}
-
-	bpf_object__close(obj);
-
-	return 0;
-}
-
-int qosify_loader_init(void)
-{
-	static const struct {
-		const char *suffix;
-		uint32_t flags;
-	} progs[] = {
-		{ "egress_eth", 0 },
-		{ "egress_ip", QOSIFY_IP_ONLY },
-		{ "ingress_eth", QOSIFY_INGRESS },
-		{ "ingress_ip", QOSIFY_INGRESS | QOSIFY_IP_ONLY },
-	};
-	glob_t g;
-	int i;
-
-	if (glob(CLASSIFY_DATA_PATH "/*", 0, NULL, &g) == 0) {
-		for (i = 0; i < g.gl_pathc; i++)
-			unlink(g.gl_pathv[i]);
-	}
-
-
-	libbpf_set_print(qosify_bpf_pr);
-
-	qosify_init_env();
-
-	for (i = 0; i < ARRAY_SIZE(progs); i++) {
-		if (qosify_create_program(progs[i].suffix, progs[i].flags))
-			return -1;
-	}
-
-	return 0;
-}

feeds/ucentral/qosify/src/main.c

@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#include <stdio.h>
-#include <unistd.h>
-#include <stdint.h>
-
-#include <libubox/uloop.h>
-
-#include "qosify.h"
-
-static int usage(const char *progname)
-{
-	fprintf(stderr, "Usage: %s [options]\n"
-		"Options:\n"
-		"	-l <file>	Load defaults from <file>\n"
-		"	-o		only load program/maps without running as daemon\n"
-		"\n", progname);
-
-	return 1;
-}
-
-int main(int argc, char **argv)
-{
-	const char *load_file = NULL;
-	bool oneshot = false;
-	int ch;
-
-	while ((ch = getopt(argc, argv, "fl:o")) != -1) {
-		switch (ch) {
-		case 'f':
-			break;
-		case 'l':
-			load_file = optarg;
-			break;
-		case 'o':
-			oneshot = true;
-			break;
-		default:
-			return usage(argv[0]);
-		}
-	}
-
-	if (qosify_loader_init())
-		return 2;
-
-	if (qosify_map_init())
-		return 2;
-
-	if (qosify_map_load_file(load_file))
-		return 2;
-
-	if (oneshot)
-		return 0;
-
-	ulog_open(ULOG_SYSLOG, LOG_DAEMON, "qosify");
-	uloop_init();
-
-	if (qosify_ubus_init() ||
-	    qosify_iface_init())
-		return 2;
-
-	uloop_run();
-
-	qosify_ubus_stop();
-	qosify_iface_stop();
-
-	uloop_done();
-
-	return 0;
-}

feeds/ucentral/qosify/src/map.c

@@ -1,735 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#include <arpa/inet.h>
-
-#include <errno.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <time.h>
-
-#include <libubox/uloop.h>
-
-#include "qosify.h"
-
-static int qosify_map_entry_cmp(const void *k1, const void *k2, void *ptr);
-
-static int qosify_map_fds[__CL_MAP_MAX];
-static AVL_TREE(map_data, qosify_map_entry_cmp, false, NULL);
-static LIST_HEAD(map_files);
-static uint32_t next_timeout;
-static uint8_t qosify_dscp_default[2] = { 0xff, 0xff };
-int qosify_map_timeout;
-int qosify_active_timeout;
-struct qosify_config config;
-
-struct qosify_map_file {
-	struct list_head list;
-	char filename[];
-};
-
-static const struct {
-	const char *name;
-	const char *type_name;
-} qosify_map_info[] = {
-	[CL_MAP_TCP_PORTS] = { "tcp_ports", "tcp_port" },
-	[CL_MAP_UDP_PORTS] = { "udp_ports", "udp_port" },
-	[CL_MAP_IPV4_ADDR] = { "ipv4_map", "ipv4_addr" },
-	[CL_MAP_IPV6_ADDR] = { "ipv6_map", "ipv6_addr" },
-	[CL_MAP_CONFIG] = { "config", "config" },
-	[CL_MAP_DNS] = { "dns", "dns" },
-};
-
-static const struct {
-	const char name[5];
-	uint8_t val;
-} codepoints[] = {
-	{ "CS0", 0 },
-	{ "CS1", 8 },
-	{ "CS2", 16 },
-	{ "CS3", 24 },
-	{ "CS4", 32 },
-	{ "CS5", 40 },
-	{ "CS6", 48 },
-	{ "CS7", 56 },
-	{ "AF11", 10 },
-	{ "AF12", 12 },
-	{ "AF13", 14 },
-	{ "AF21", 18 },
-	{ "AF22", 20 },
-	{ "AF22", 22 },
-	{ "AF31", 26 },
-	{ "AF32", 28 },
-	{ "AF33", 30 },
-	{ "AF41", 34 },
-	{ "AF42", 36 },
-	{ "AF43", 38 },
-	{ "EF", 46 },
-	{ "VA", 44 },
-	{ "LE", 1 },
-	{ "DF", 0 },
-};
-
-static void qosify_map_timer_cb(struct uloop_timeout *t)
-{
-	qosify_map_gc();
-}
-
-static struct uloop_timeout qosify_map_timer = {
-	.cb = qosify_map_timer_cb,
-};
-
-static uint32_t qosify_gettime(void)
-{
-	struct timespec ts;
-
-	clock_gettime(CLOCK_MONOTONIC, &ts);
-
-	return ts.tv_sec;
-}
-
-static const char *
-qosify_map_path(enum qosify_map_id id)
-{
-	static char path[128];
-	const char *name;
-
-	if (id >= ARRAY_SIZE(qosify_map_info))
-		return NULL;
-
-	name = qosify_map_info[id].name;
-	if (!name)
-		return NULL;
-
-	snprintf(path, sizeof(path), "%s/%s", CLASSIFY_DATA_PATH, name);
-
-	return path;
-}
-
-static int qosify_map_get_fd(enum qosify_map_id id)
-{
-	const char *path = qosify_map_path(id);
-	int fd;
-
-	if (!path)
-		return -1;
-
-	fd = bpf_obj_get(path);
-	if (fd < 0)
-		fprintf(stderr, "Failed to open map %s: %s\n", path, strerror(errno));
-
-	return fd;
-}
-
-static void qosify_map_clear_list(enum qosify_map_id id)
-{
-	int fd = qosify_map_fds[id];
-	__u32 key[4] = {};
-
-	while (bpf_map_get_next_key(fd, &key, &key) != -1)
-		bpf_map_delete_elem(fd, &key);
-}
-
-static void __qosify_map_set_dscp_default(enum qosify_map_id id, uint8_t val)
-{
-	struct qosify_map_data data = {
-		.id = id,
-	};
-	int fd = qosify_map_fds[id];
-	int i;
-
-	val |= QOSIFY_DSCP_DEFAULT_FLAG;
-
-	for (i = 0; i < (1 << 16); i++) {
-		data.addr.port = htons(i);
-		if (avl_find(&map_data, &data))
-			continue;
-
-		bpf_map_update_elem(fd, &data.addr, &val, BPF_ANY);
-	}
-}
-
-void qosify_map_set_dscp_default(enum qosify_map_id id, uint8_t val)
-{
-	bool udp;
-
-	if (id == CL_MAP_TCP_PORTS)
-		udp = false;
-	else if (id == CL_MAP_UDP_PORTS)
-		udp = true;
-	else
-		return;
-
-	if (qosify_dscp_default[udp] == val)
-		return;
-
-	qosify_dscp_default[udp] = val;
-	__qosify_map_set_dscp_default(id, val);
-}
-
-int qosify_map_init(void)
-{
-	int i;
-
-	for (i = 0; i < CL_MAP_DNS; i++) {
-		qosify_map_fds[i] = qosify_map_get_fd(i);
-		if (qosify_map_fds[i] < 0)
-			return -1;
-	}
-
-	qosify_map_clear_list(CL_MAP_IPV4_ADDR);
-	qosify_map_clear_list(CL_MAP_IPV6_ADDR);
-	qosify_map_reset_config();
-
-	return 0;
-}
-
-static char *str_skip(char *str, bool space)
-{
-	while (*str && isspace(*str) == space)
-		str++;
-
-	return str;
-}
-
-static int
-qosify_map_codepoint(const char *val)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(codepoints); i++)
-		if (!strcmp(codepoints[i].name, val))
-			return codepoints[i].val;
-
-	return 0xff;
-}
-
-static int qosify_map_entry_cmp(const void *k1, const void *k2, void *ptr)
-{
-	const struct qosify_map_data *d1 = k1;
-	const struct qosify_map_data *d2 = k2;
-
-	if (d1->id != d2->id)
-		return d2->id - d1->id;
-
-	if (d1->id == CL_MAP_DNS)
-		return strcmp(d1->addr.dns.pattern, d2->addr.dns.pattern);
-
-	return memcmp(&d1->addr, &d2->addr, sizeof(d1->addr));
-}
-
-static struct qosify_map_entry *
-__qosify_map_alloc_entry(struct qosify_map_data *data)
-{
-	struct qosify_map_entry *e;
-	char *pattern;
-
-	if (data->id < CL_MAP_DNS) {
-		e = calloc(1, sizeof(*e));
-		memcpy(&e->data.addr, &data->addr, sizeof(e->data.addr));
-
-		return e;
-	}
-
-	e = calloc_a(sizeof(*e), &pattern, strlen(data->addr.dns.pattern) + 1);
-	strcpy(pattern, data->addr.dns.pattern);
-	e->data.addr.dns.pattern = pattern;
-	if (regcomp(&e->data.addr.dns.regex, pattern,
-		    REG_EXTENDED | REG_ICASE | REG_NOSUB)) {
-		free(e);
-		return NULL;
-	}
-
-	return e;
-}
-
-static void __qosify_map_set_entry(struct qosify_map_data *data)
-{
-	int fd = qosify_map_fds[data->id];
-	struct qosify_map_entry *e;
-	bool file = data->file;
-	int32_t delta = 0;
-	bool add = data->dscp != 0xff;
-	uint8_t prev_dscp = 0xff;
-
-	e = avl_find_element(&map_data, data, e, avl);
-	if (!e) {
-		if (!add)
-			return;
-
-		e = __qosify_map_alloc_entry(data);
-		if (!e)
-			return;
-
-		e->avl.key = &e->data;
-		e->data.id = data->id;
-		avl_insert(&map_data, &e->avl);
-	} else {
-		prev_dscp = e->data.dscp;
-	}
-
-	if (file)
-		e->data.file = add;
-	else
-		e->data.user = add;
-
-	if (add) {
-		if (file)
-			e->data.file_dscp = data->dscp;
-		if (!e->data.user || !file)
-			e->data.dscp = data->dscp;
-	} else if (e->data.file && !file) {
-		e->data.dscp = e->data.file_dscp;
-	}
-
-	if (e->data.dscp != prev_dscp && data->id < CL_MAP_DNS) {
-		struct qosify_ip_map_val val = {
-			.dscp = e->data.dscp,
-			.seen = 1,
-		};
-
-		bpf_map_update_elem(fd, &data->addr, &val, BPF_ANY);
-	}
-
-	if (add) {
-		if (qosify_map_timeout == ~0 || file) {
-			e->timeout = ~0;
-			return;
-		}
-
-		e->timeout = qosify_gettime() + qosify_map_timeout;
-		delta = e->timeout - next_timeout;
-		if (next_timeout && delta >= 0)
-			return;
-	}
-
-	uloop_timeout_set(&qosify_map_timer, 1);
-}
-
-static int
-qosify_map_set_port(struct qosify_map_data *data, const char *str)
-{
-	unsigned long start_port, end_port;
-	char *err;
-	int i;
-
-	start_port = end_port = strtoul(str, &err, 0);
-	if (err && *err) {
-		if (*err == '-')
-			end_port = strtoul(err + 1, &err, 0);
-		if (*err)
-			return -1;
-	}
-
-	if (!start_port || end_port < start_port ||
-	    end_port >= 65535)
-		return -1;
-
-	for (i = start_port; i <= end_port; i++) {
-		data->addr.port = htons(i);
-		__qosify_map_set_entry(data);
-	}
-
-	return 0;
-}
-
-static int
-qosify_map_fill_ip(struct qosify_map_data *data, const char *str)
-{
-	int af;
-
-	if (data->id == CL_MAP_IPV6_ADDR)
-		af = AF_INET6;
-	else
-		af = AF_INET;
-
-	if (inet_pton(af, str, &data->addr) != 1)
-		return -1;
-
-	return 0;
-}
-
-int qosify_map_set_entry(enum qosify_map_id id, bool file, const char *str, uint8_t dscp)
-{
-	struct qosify_map_data data = {
-		.id = id,
-		.file = file,
-		.dscp = dscp,
-	};
-
-	switch (id) {
-	case CL_MAP_DNS:
-		data.addr.dns.pattern = str;
-		break;
-	case CL_MAP_TCP_PORTS:
-	case CL_MAP_UDP_PORTS:
-		return qosify_map_set_port(&data, str);
-	case CL_MAP_IPV4_ADDR:
-	case CL_MAP_IPV6_ADDR:
-		if (qosify_map_fill_ip(&data, str))
-			return -1;
-		break;
-	default:
-		return -1;
-	}
-
-	__qosify_map_set_entry(&data);
-
-	return 0;
-}
-
-int qosify_map_dscp_value(const char *val)
-{
-	unsigned long dscp;
-	char *err;
-	bool fallback = false;
-
-	if (*val == '+') {
-		fallback = true;
-		val++;
-	}
-
-	dscp = strtoul(val, &err, 0);
-	if (err && *err)
-		dscp = qosify_map_codepoint(val);
-
-	if (dscp >= 64)
-		return -1;
-
-	return dscp + (fallback << 6);
-}
-
-static void
-qosify_map_dscp_codepoint_str(char *dest, int len, uint8_t dscp)
-{
-	int i;
-
-	if (dscp & QOSIFY_DSCP_FALLBACK_FLAG) {
-		*(dest++) = '+';
-		len--;
-		dscp &= ~QOSIFY_DSCP_FALLBACK_FLAG;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(codepoints); i++) {
-		if (codepoints[i].val != dscp)
-			continue;
-
-		snprintf(dest, len, "%s", codepoints[i].name);
-		return;
-	}
-
-	snprintf(dest, len, "0x%x", dscp);
-}
-
-static void
-qosify_map_parse_line(char *str)
-{
-	const char *key, *value;
-	int dscp;
-
-	str = str_skip(str, true);
-	key = str;
-
-	str = str_skip(str, false);
-	if (!*str)
-		return;
-
-	*(str++) = 0;
-	str = str_skip(str, true);
-	value = str;
-
-	dscp = qosify_map_dscp_value(value);
-	if (dscp < 0)
-		return;
-
-	if (!strncmp(key, "dns:", 4))
-		qosify_map_set_entry(CL_MAP_DNS, true, key + 4, dscp);
-	if (!strncmp(key, "tcp:", 4))
-		qosify_map_set_entry(CL_MAP_TCP_PORTS, true, key + 4, dscp);
-	else if (!strncmp(key, "udp:", 4))
-		qosify_map_set_entry(CL_MAP_UDP_PORTS, true, key + 4, dscp);
-	else if (strchr(key, ':'))
-		qosify_map_set_entry(CL_MAP_IPV6_ADDR, true, key, dscp);
-	else if (strchr(key, '.'))
-		qosify_map_set_entry(CL_MAP_IPV4_ADDR, true, key, dscp);
-}
-
-static int __qosify_map_load_file(const char *file)
-{
-	char line[1024];
-	char *cur;
-	FILE *f;
-
-	if (!file)
-		return 0;
-
-	f = fopen(file, "r");
-	if (!f) {
-		fprintf(stderr, "Can't open data file %s\n", file);
-		return -1;
-	}
-
-	while (fgets(line, sizeof(line), f)) {
-		cur = strchr(line, '#');
-		if (cur)
-			*cur = 0;
-
-		cur = line + strlen(line);
-		if (cur == line)
-			continue;
-
-		while (cur > line && isspace(cur[-1]))
-			cur--;
-
-		*cur = 0;
-		qosify_map_parse_line(line);
-	}
-
-	fclose(f);
-
-	return 0;
-}
-
-int qosify_map_load_file(const char *file)
-{
-	struct qosify_map_file *f;
-
-	if (!file)
-		return 0;
-
-	f = calloc(1, sizeof(*f) + strlen(file) + 1);
-	strcpy(f->filename, file);
-	list_add_tail(&f->list, &map_files);
-
-	return __qosify_map_load_file(file);
-}
-
-static void qosify_map_reset_file_entries(void)
-{
-	struct qosify_map_entry *e;
-
-	avl_for_each_element(&map_data, e, avl)
-		e->data.file = false;
-}
-
-void qosify_map_clear_files(void)
-{
-	struct qosify_map_file *f, *tmp;
-
-	qosify_map_reset_file_entries();
-
-	list_for_each_entry_safe(f, tmp, &map_files, list) {
-		list_del(&f->list);
-		free(f);
-	}
-}
-
-void qosify_map_reset_config(void)
-{
-	qosify_map_clear_files();
-	qosify_map_set_dscp_default(CL_MAP_TCP_PORTS, 0);
-	qosify_map_set_dscp_default(CL_MAP_UDP_PORTS, 0);
-	qosify_map_timeout = 3600;
-	qosify_active_timeout = 300;
-
-	memset(&config, 0, sizeof(config));
-	config.dscp_prio = 0xff;
-	config.dscp_bulk = 0xff;
-	config.dscp_icmp = 0xff;
-}
-
-void qosify_map_reload(void)
-{
-	struct qosify_map_file *f;
-
-	qosify_map_reset_file_entries();
-
-	list_for_each_entry(f, &map_files, list)
-		__qosify_map_load_file(f->filename);
-
-	qosify_map_gc();
-}
-
-static void qosify_map_free_entry(struct qosify_map_entry *e)
-{
-	int fd = qosify_map_fds[e->data.id];
-
-	avl_delete(&map_data, &e->avl);
-	if (e->data.id < CL_MAP_DNS)
-		bpf_map_delete_elem(fd, &e->data.addr);
-	free(e);
-}
-
-static bool
-qosify_map_entry_refresh_timeout(struct qosify_map_entry *e)
-{
-	struct qosify_ip_map_val val;
-	int fd = qosify_map_fds[e->data.id];
-
-	if (e->data.id != CL_MAP_IPV4_ADDR &&
-	    e->data.id != CL_MAP_IPV6_ADDR)
-		return false;
-
-	if (bpf_map_lookup_elem(fd, &e->data.addr, &val))
-		return false;
-
-	if (!val.seen)
-		return false;
-
-	e->timeout = qosify_gettime() + qosify_active_timeout;
-	val.seen = 0;
-	bpf_map_update_elem(fd, &e->data.addr, &val, BPF_ANY);
-
-	return true;
-}
-
-void qosify_map_gc(void)
-{
-	struct qosify_map_entry *e, *tmp;
-	int32_t timeout = 0;
-	uint32_t cur_time = qosify_gettime();
-
-	next_timeout = 0;
-	avl_for_each_element_safe(&map_data, e, avl, tmp) {
-		int32_t cur_timeout;
-
-		if (e->data.user && e->timeout != ~0) {
-			cur_timeout = e->timeout - cur_time;
-			if (cur_timeout <= 0 &&
-			    qosify_map_entry_refresh_timeout(e))
-				cur_timeout = e->timeout - cur_time;
-			if (cur_timeout <= 0) {
-				e->data.user = false;
-				e->data.dscp = e->data.file_dscp;
-			} else if (!timeout || cur_timeout < timeout) {
-				timeout = cur_timeout;
-				next_timeout = e->timeout;
-			}
-		}
-
-		if (e->data.file || e->data.user)
-			continue;
-
-		qosify_map_free_entry(e);
-	}
-
-	if (!timeout)
-		return;
-
-	uloop_timeout_set(&qosify_map_timer, timeout * 1000);
-}
-
-
-int qosify_map_add_dns_host(const char *host, const char *addr, const char *type, int ttl)
-{
-	struct qosify_map_data data = {
-		.id = CL_MAP_DNS,
-		.addr.dns.pattern = "",
-	};
-	struct qosify_map_entry *e;
-	int prev_timeout = qosify_map_timeout;
-
-	e = avl_find_ge_element(&map_data, &data, e, avl);
-	if (!e)
-		return 0;
-
-	memset(&data, 0, sizeof(data));
-	data.user = true;
-	if (!strcmp(type, "A"))
-		data.id = CL_MAP_IPV4_ADDR;
-	else if (!strcmp(type, "AAAA"))
-		data.id = CL_MAP_IPV6_ADDR;
-	else
-		return 0;
-
-	if (qosify_map_fill_ip(&data, addr))
-		return -1;
-
-	avl_for_element_to_last(&map_data, e, e, avl) {
-		regex_t *regex = &e->data.addr.dns.regex;
-
-		if (e->data.id != CL_MAP_DNS)
-			return 0;
-
-		if (regexec(regex, host, 0, NULL, 0) != 0)
-			continue;
-
-		if (ttl)
-			qosify_map_timeout = ttl;
-		data.dscp = e->data.dscp;
-		__qosify_map_set_entry(&data);
-		qosify_map_timeout = prev_timeout;
-	}
-
-	return 0;
-}
-
-
-void qosify_map_dump(struct blob_buf *b)
-{
-	struct qosify_map_entry *e;
-	uint32_t cur_time = qosify_gettime();
-	int buf_len = INET6_ADDRSTRLEN + 1;
-	char *buf;
-	void *a;
-	int af;
-
-	a = blobmsg_open_array(b, "entries");
-	avl_for_each_element(&map_data, e, avl) {
-		void *c;
-
-		if (!e->data.file && !e->data.user)
-			continue;
-
-		c = blobmsg_open_table(b, NULL);
-		if (e->data.user && e->timeout != ~0) {
-			int32_t cur_timeout = e->timeout - cur_time;
-
-			if (cur_timeout < 0)
-				cur_timeout = 0;
-
-			blobmsg_add_u32(b, "timeout", cur_timeout);
-		}
-
-		blobmsg_add_u8(b, "file", e->data.file);
-		blobmsg_add_u8(b, "user", e->data.user);
-
-		buf = blobmsg_alloc_string_buffer(b, "dscp", buf_len);
-		qosify_map_dscp_codepoint_str(buf, buf_len, e->data.dscp);
-		blobmsg_add_string_buffer(b);
-
-		blobmsg_add_string(b, "type", qosify_map_info[e->data.id].type_name);
-
-		switch (e->data.id) {
-		case CL_MAP_TCP_PORTS:
-		case CL_MAP_UDP_PORTS:
-			blobmsg_printf(b, "addr", "%d", ntohs(e->data.addr.port));
-			break;
-		case CL_MAP_IPV4_ADDR:
-		case CL_MAP_IPV6_ADDR:
-			buf = blobmsg_alloc_string_buffer(b, "addr", buf_len);
-			af = e->data.id == CL_MAP_IPV6_ADDR ? AF_INET6 : AF_INET;
-			inet_ntop(af, &e->data.addr, buf, buf_len);
-			blobmsg_add_string_buffer(b);
-			break;
-		case CL_MAP_DNS:
-			blobmsg_add_string(b, "addr", e->data.addr.dns.pattern);
-			break;
-		default:
-			*buf = 0;
-			break;
-		}
-		blobmsg_close_table(b, c);
-	}
-	blobmsg_close_array(b, a);
-}
-
-void qosify_map_update_config(void)
-{
-	int fd = qosify_map_fds[CL_MAP_CONFIG];
-	uint32_t key = 0;
-
-	bpf_map_update_elem(fd, &key, &config, BPF_ANY);
-}

feeds/ucentral/qosify/src/qosify-bpf.c

@@ -1,464 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#define KBUILD_MODNAME "foo"
-#include <uapi/linux/bpf.h>
-#include <uapi/linux/if_ether.h>
-#include <uapi/linux/if_packet.h>
-#include <uapi/linux/ip.h>
-#include <uapi/linux/ipv6.h>
-#include <uapi/linux/in.h>
-#include <uapi/linux/tcp.h>
-#include <uapi/linux/udp.h>
-#include <uapi/linux/filter.h>
-#include <uapi/linux/pkt_cls.h>
-#include <linux/ip.h>
-#include <net/ipv6.h>
-#include <bpf/bpf_helpers.h>
-#include <bpf/bpf_endian.h>
-#include "qosify-bpf.h"
-
-#define INET_ECN_MASK 3
-
-#define FLOW_CHECK_INTERVAL	((u32)((1000000000ULL) >> 24))
-#define FLOW_TIMEOUT		((u32)((30ULL * 1000000000ULL) >> 24))
-#define FLOW_BULK_TIMEOUT	5
-
-#define EWMA_SHIFT		12
-
-const volatile static uint32_t module_flags = 0;
-
-struct flow_bucket {
-	__u32 last_update;
-	__u32 pkt_len_avg;
-	__u16 pkt_count;
-	__u8 dscp;
-	__u8 bulk_timeout;
-};
-
-struct {
-	__uint(type, BPF_MAP_TYPE_ARRAY);
-	__uint(pinning, 1);
-	__type(key, __u32);
-	__type(value, struct qosify_config);
-	__uint(max_entries, 1);
-} config SEC(".maps");
-
-typedef struct {
-	__uint(type, BPF_MAP_TYPE_ARRAY);
-	__uint(pinning, 1);
-	__type(key, __u32);
-	__type(value, __u8);
-	__uint(max_entries, 1 << 16);
-} port_array_t;
-
-struct {
-	__uint(type, BPF_MAP_TYPE_LRU_HASH);
-	__uint(pinning, 1);
-	__type(key, __u32);
-	__uint(value_size, sizeof(struct flow_bucket));
-	__uint(max_entries, QOSIFY_FLOW_BUCKETS);
-} flow_map SEC(".maps");
-
-port_array_t tcp_ports SEC(".maps");
-port_array_t udp_ports SEC(".maps");
-
-struct {
-	__uint(type, BPF_MAP_TYPE_HASH);
-	__uint(pinning, 1);
-	__uint(key_size, sizeof(struct in_addr));
-	__type(value, struct qosify_ip_map_val);
-	__uint(max_entries, 100000);
-	__uint(map_flags, BPF_F_NO_PREALLOC);
-} ipv4_map SEC(".maps");
-
-struct {
-	__uint(type, BPF_MAP_TYPE_HASH);
-	__uint(pinning, 1);
-	__uint(key_size, sizeof(struct in6_addr));
-	__type(value, struct qosify_ip_map_val);
-	__uint(max_entries, 100000);
-	__uint(map_flags, BPF_F_NO_PREALLOC);
-} ipv6_map SEC(".maps");
-
-static struct qosify_config *get_config(void)
-{
-	__u32 key = 0;
-
-	return bpf_map_lookup_elem(&config, &key);
-}
-
-static __always_inline int proto_is_vlan(__u16 h_proto)
-{
-	return !!(h_proto == bpf_htons(ETH_P_8021Q) ||
-		  h_proto == bpf_htons(ETH_P_8021AD));
-}
-
-static __always_inline int proto_is_ip(__u16 h_proto)
-{
-	return !!(h_proto == bpf_htons(ETH_P_IP) ||
-		  h_proto == bpf_htons(ETH_P_IPV6));
-}
-
-static __always_inline void *skb_ptr(struct __sk_buff *skb, __u32 offset)
-{
-	void *start = (void *)(unsigned long long)skb->data;
-
-	return start + offset;
-}
-
-static __always_inline void *skb_end_ptr(struct __sk_buff *skb)
-{
-	return (void *)(unsigned long long)skb->data_end;
-}
-
-static __always_inline int skb_check(struct __sk_buff *skb, void *ptr)
-{
-	if (ptr > skb_end_ptr(skb))
-		return -1;
-
-	return 0;
-}
-
-static __always_inline __u32 cur_time(void)
-{
-	__u32 val = bpf_ktime_get_ns() >> 24;
-
-	if (!val)
-		val = 1;
-
-	return val;
-}
-
-static __always_inline __u32 ewma(__u32 *avg, __u32 val)
-{
-	if (*avg)
-		*avg = (*avg * 3) / 4 + (val << EWMA_SHIFT) / 4;
-	else
-		*avg = val << EWMA_SHIFT;
-
-	return *avg >> EWMA_SHIFT;
-}
-
-static __always_inline void
-ipv4_change_dsfield(struct iphdr *iph, __u8 mask, __u8 value, bool force)
-{
-	__u32 check = bpf_ntohs(iph->check);
-	__u8 dsfield;
-
-	if ((iph->tos & mask) && !force)
-		return;
-
-	dsfield = (iph->tos & mask) | value;
-	if (iph->tos == dsfield)
-		return;
-
-	check += iph->tos;
-	if ((check + 1) >> 16)
-		check = (check + 1) & 0xffff;
-	check -= dsfield;
-	check += check >> 16;
-	iph->check = bpf_htons(check);
-	iph->tos = dsfield;
-}
-
-static __always_inline void
-ipv6_change_dsfield(struct ipv6hdr *ipv6h, __u8 mask, __u8 value, bool force)
-{
-	__u16 *p = (__u16 *)ipv6h;
-	__u16 val;
-
-	if (((*p >> 4) & mask) && !force)
-		return;
-
-	val = (*p & bpf_htons((((__u16)mask << 4) | 0xf00f))) | bpf_htons((__u16)value << 4);
-	if (val == *p)
-		return;
-
-	*p = val;
-}
-
-static __always_inline int
-parse_ethernet(struct __sk_buff *skb, __u32 *offset)
-{
-	struct ethhdr *eth;
-	__u16 h_proto;
-	int i;
-
-	eth = skb_ptr(skb, *offset);
-	if (skb_check(skb, eth + 1))
-		return -1;
-
-	h_proto = eth->h_proto;
-	*offset += sizeof(*eth);
-
-#pragma unroll
-	for (i = 0; i < 2; i++) {
-		struct vlan_hdr *vlh = skb_ptr(skb, *offset);
-
-		if (!proto_is_vlan(h_proto))
-			break;
-
-		if (skb_check(skb, vlh + 1))
-			return -1;
-
-		h_proto = vlh->h_vlan_encapsulated_proto;
-		*offset += sizeof(*vlh);
-	}
-
-	return h_proto;
-}
-
-static void
-parse_l4proto(struct qosify_config *config, struct __sk_buff *skb,
-	      __u32 offset, __u8 proto, __u8 *dscp_out)
-{
-	struct udphdr *udp;
-	__u32 src, dest, key;
-	__u8 *value;
-
-	udp = skb_ptr(skb, offset);
-	if (skb_check(skb, &udp->len))
-		return;
-
-	if (config && (proto == IPPROTO_ICMP || proto == IPPROTO_ICMPV6)) {
-		*dscp_out = config->dscp_icmp;
-		return;
-	}
-
-	src = udp->source;
-	dest = udp->dest;
-
-	if (module_flags & QOSIFY_INGRESS)
-		key = src;
-	else
-		key = dest;
-
-	if (proto == IPPROTO_TCP) {
-		value = bpf_map_lookup_elem(&tcp_ports, &key);
-	} else {
-		if (proto != IPPROTO_UDP)
-			key = 0;
-
-		value = bpf_map_lookup_elem(&udp_ports, &key);
-	}
-
-	if (!value)
-		return;
-
-	*dscp_out = *value;
-}
-
-static void
-check_flow(struct qosify_config *config, struct __sk_buff *skb,
-	   uint8_t *dscp)
-{
-	struct flow_bucket flow_data;
-	struct flow_bucket *flow;
-	__s32 delta;
-	__u32 hash;
-	__u32 time;
-
-	if (!(*dscp & QOSIFY_DSCP_DEFAULT_FLAG))
-		return;
-
-	if (!config)
-		return;
-
-	if (!config->bulk_trigger_pps &&
-	    !config->prio_max_avg_pkt_len)
-		return;
-
-	time = cur_time();
-	hash = bpf_get_hash_recalc(skb);
-	flow = bpf_map_lookup_elem(&flow_map, &hash);
-	if (!flow) {
-		memset(&flow_data, 0, sizeof(flow_data));
-		bpf_map_update_elem(&flow_map, &hash, &flow_data, BPF_ANY);
-		flow = bpf_map_lookup_elem(&flow_map, &hash);
-		if (!flow)
-			return;
-	}
-
-	if (!flow->last_update)
-		goto reset;
-
-	delta = time - flow->last_update;
-	if ((u32)delta > FLOW_TIMEOUT)
-		goto reset;
-
-	if (delta >= FLOW_CHECK_INTERVAL) {
-		if (flow->bulk_timeout) {
-			flow->bulk_timeout--;
-			if (!flow->bulk_timeout)
-				flow->dscp = 0xff;
-		}
-
-		goto clear;
-	}
-
-	if (flow->pkt_count < 0xffff)
-		flow->pkt_count++;
-
-	if (config->bulk_trigger_pps &&
-	    flow->pkt_count > config->bulk_trigger_pps) {
-		flow->dscp = config->dscp_bulk;
-		flow->bulk_timeout = config->bulk_trigger_timeout;
-	}
-
-out:
-	if (config->prio_max_avg_pkt_len &&
-	    flow->dscp != config->dscp_bulk) {
-		if (ewma(&flow->pkt_len_avg, skb->len) <
-		    config->prio_max_avg_pkt_len)
-			flow->dscp = config->dscp_prio;
-		else
-			flow->dscp = 0xff;
-	}
-
-	if (flow->dscp != 0xff)
-		*dscp = flow->dscp;
-
-	return;
-
-reset:
-	flow->dscp = 0xff;
-	flow->pkt_len_avg = 0;
-clear:
-	flow->pkt_count = 1;
-	flow->last_update = time;
-
-	goto out;
-}
-
-static __always_inline void
-parse_ipv4(struct __sk_buff *skb, __u32 *offset)
-{
-	struct qosify_config *config;
-	struct qosify_ip_map_val *ip_val;
-	const __u32 zero_port = 0;
-	struct iphdr *iph;
-	__u8 dscp = 0xff;
-	__u8 *value;
-	__u8 ipproto;
-	int hdr_len;
-	void *key;
-	bool force;
-
-	config = get_config();
-
-	iph = skb_ptr(skb, *offset);
-	if (skb_check(skb, iph + 1))
-		return;
-
-	hdr_len = iph->ihl * 4;
-	if (bpf_skb_pull_data(skb, *offset + hdr_len + sizeof(struct udphdr)))
-		return;
-
-	iph = skb_ptr(skb, *offset);
-	*offset += hdr_len;
-
-	if (skb_check(skb, (void *)(iph + 1)))
-		return;
-
-	ipproto = iph->protocol;
-	parse_l4proto(config, skb, *offset, ipproto, &dscp);
-
-	if (module_flags & QOSIFY_INGRESS)
-		key = &iph->saddr;
-	else
-		key = &iph->daddr;
-
-	ip_val = bpf_map_lookup_elem(&ipv4_map, key);
-	if (ip_val) {
-		if (!ip_val->seen)
-			ip_val->seen = 1;
-		dscp = ip_val->dscp;
-	} else if (dscp == 0xff) {
-		/* use udp port 0 entry as fallback for non-tcp/udp */
-		value = bpf_map_lookup_elem(&udp_ports, &zero_port);
-		if (value)
-			dscp = *value;
-	}
-
-	check_flow(config, skb, &dscp);
-
-	force = !(dscp & QOSIFY_DSCP_FALLBACK_FLAG);
-	dscp &= GENMASK(5, 0);
-
-	ipv4_change_dsfield(iph, INET_ECN_MASK, dscp << 2, force);
-}
-
-static __always_inline void
-parse_ipv6(struct __sk_buff *skb, __u32 *offset)
-{
-	struct qosify_config *config;
-	struct qosify_ip_map_val *ip_val;
-	const __u32 zero_port = 0;
-	struct ipv6hdr *iph;
-	__u8 dscp = 0;
-	__u8 *value;
-	__u8 ipproto;
-	void *key;
-	bool force;
-
-	config = get_config();
-
-	if (bpf_skb_pull_data(skb, *offset + sizeof(*iph) + sizeof(struct udphdr)))
-		return;
-
-	iph = skb_ptr(skb, *offset);
-	*offset += sizeof(*iph);
-
-	if (skb_check(skb, (void *)(iph + 1)))
-		return;
-
-	ipproto = iph->nexthdr;
-	if (module_flags & QOSIFY_INGRESS)
-		key = &iph->saddr;
-	else
-		key = &iph->daddr;
-
-	parse_l4proto(config, skb, *offset, ipproto, &dscp);
-
-	ip_val = bpf_map_lookup_elem(&ipv6_map, key);
-	if (ip_val) {
-		if (!ip_val->seen)
-			ip_val->seen = 1;
-		dscp = ip_val->dscp;
-	} else if (dscp == 0xff) {
-		/* use udp port 0 entry as fallback for non-tcp/udp */
-		value = bpf_map_lookup_elem(&udp_ports, &zero_port);
-		if (value)
-			dscp = *value;
-	}
-
-	check_flow(config, skb, &dscp);
-
-	force = !(dscp & QOSIFY_DSCP_FALLBACK_FLAG);
-	dscp &= GENMASK(5, 0);
-
-	ipv6_change_dsfield(iph, INET_ECN_MASK, dscp << 2, force);
-}
-
-SEC("classifier")
-int classify(struct __sk_buff *skb)
-{
-	__u32 offset = 0;
-	int type;
-
-	if (module_flags & QOSIFY_IP_ONLY)
-		type = skb->protocol;
-	else
-		type = parse_ethernet(skb, &offset);
-
-	if (type == bpf_htons(ETH_P_IP))
-		parse_ipv4(skb, &offset);
-	else if (type == bpf_htons(ETH_P_IPV6))
-		parse_ipv6(skb, &offset);
-
-	return TC_ACT_OK;
-}
-
-char _license[] SEC("license") = "GPL";

feeds/ucentral/qosify/src/qosify-bpf.h

@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#ifndef __BPF_QOSIFY_H
-#define __BPF_QOSIFY_H
-
-#ifndef QOSIFY_FLOW_BUCKET_SHIFT
-#define QOSIFY_FLOW_BUCKET_SHIFT	13
-#endif
-
-#define QOSIFY_FLOW_BUCKETS		(1 << QOSIFY_FLOW_BUCKET_SHIFT)
-
-/* rodata per-instance flags */
-#define QOSIFY_INGRESS			(1 << 0)
-#define QOSIFY_IP_ONLY			(1 << 1)
-
-
-#define QOSIFY_DSCP_FALLBACK_FLAG	(1 << 6)
-#define QOSIFY_DSCP_DEFAULT_FLAG	(1 << 7)
-
-/* global config data */
-struct qosify_config {
-	uint8_t dscp_prio;
-	uint8_t dscp_bulk;
-	uint8_t dscp_icmp;
-
-	uint8_t bulk_trigger_timeout;
-	uint16_t bulk_trigger_pps;
-
-	uint16_t prio_max_avg_pkt_len;
-};
-
-struct qosify_ip_map_val {
-	uint8_t dscp; /* must be first */
-	uint8_t seen;
-};
-
-#endif

feeds/ucentral/qosify/src/qosify.h

@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#ifndef __QOS_CLASSIFY_H
-#define __QOS_CLASSIFY_H
-
-#include <stdbool.h>
-#include <regex.h>
-
-#include <bpf/bpf.h>
-#include <bpf/libbpf.h>
-
-#include "qosify-bpf.h"
-
-#include <libubox/utils.h>
-#include <libubox/avl.h>
-#include <libubox/blobmsg.h>
-#include <libubox/ulog.h>
-
-#include <netinet/in.h>
-
-#define CLASSIFY_PROG_PATH	"/lib/bpf/qosify-bpf.o"
-#define CLASSIFY_PIN_PATH	"/sys/fs/bpf/qosify"
-#define CLASSIFY_DATA_PATH	"/sys/fs/bpf/qosify_data"
-
-enum qosify_map_id {
-	CL_MAP_TCP_PORTS,
-	CL_MAP_UDP_PORTS,
-	CL_MAP_IPV4_ADDR,
-	CL_MAP_IPV6_ADDR,
-	CL_MAP_CONFIG,
-	CL_MAP_DNS,
-	__CL_MAP_MAX,
-};
-
-struct qosify_map_data {
-	enum qosify_map_id id;
-
-	bool file : 1;
-	bool user : 1;
-
-	uint8_t dscp;
-	uint8_t file_dscp;
-
-	union {
-		uint32_t port;
-		struct in_addr ip;
-		struct in6_addr ip6;
-		struct {
-			const char *pattern;
-			regex_t regex;
-		} dns;
-	} addr;
-};
-
-struct qosify_map_entry {
-	struct avl_node avl;
-
-	uint32_t timeout;
-
-	struct qosify_map_data data;
-};
-
-
-extern int qosify_map_timeout;
-extern int qosify_active_timeout;
-extern struct qosify_config config;
-
-int qosify_loader_init(void);
-
-int qosify_map_init(void);
-int qosify_map_dscp_value(const char *val);
-int qosify_map_load_file(const char *file);
-int qosify_map_set_entry(enum qosify_map_id id, bool file, const char *str, uint8_t dscp);
-void qosify_map_reload(void);
-void qosify_map_clear_files(void);
-void qosify_map_gc(void);
-void qosify_map_dump(struct blob_buf *b);
-void qosify_map_set_dscp_default(enum qosify_map_id id, uint8_t val);
-void qosify_map_reset_config(void);
-void qosify_map_update_config(void);
-int qosify_map_add_dns_host(const char *host, const char *addr, const char *type, int ttl);
-
-int qosify_iface_init(void);
-void qosify_iface_config_update(struct blob_attr *ifaces, struct blob_attr *devs);
-void qosify_iface_check(void);
-void qosify_iface_status(struct blob_buf *b);
-void qosify_iface_stop(void);
-
-int qosify_ubus_init(void);
-void qosify_ubus_stop(void);
-int qosify_ubus_check_interface(const char *name, char *ifname, int ifname_len);
-
-#endif

feeds/ucentral/qosify/src/ubus.c

@@ -1,416 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 Felix Fietkau <nbd@nbd.name>
- */
-#include <libubus.h>
-
-#include "qosify.h"
-
-static struct blob_buf b;
-
-static int
-qosify_ubus_add_array(struct blob_attr *attr, uint8_t val, enum qosify_map_id id)
-{
-	struct blob_attr *cur;
-	int rem;
-
-	if (blobmsg_check_array(attr, BLOBMSG_TYPE_STRING) < 0)
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	blobmsg_for_each_attr(cur, attr, rem)
-		qosify_map_set_entry(id, false, blobmsg_get_string(cur), val);
-
-	return 0;
-}
-
-static int
-qosify_ubus_set_files(struct blob_attr *attr)
-{
-	struct blob_attr *cur;
-	int rem;
-
-	if (blobmsg_check_array(attr, BLOBMSG_TYPE_STRING) < 0)
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	qosify_map_clear_files();
-
-	blobmsg_for_each_attr(cur, attr, rem)
-		qosify_map_load_file(blobmsg_get_string(cur));
-
-	qosify_map_gc();
-
-	return 0;
-}
-
-
-enum {
-	CL_ADD_DSCP,
-	CL_ADD_TIMEOUT,
-	CL_ADD_IPV4,
-	CL_ADD_IPV6,
-	CL_ADD_TCP_PORT,
-	CL_ADD_UDP_PORT,
-	CL_ADD_DNS,
-	__CL_ADD_MAX
-};
-
-static const struct blobmsg_policy qosify_add_policy[__CL_ADD_MAX] = {
-	[CL_ADD_DSCP] = { "dscp", BLOBMSG_TYPE_STRING },
-	[CL_ADD_TIMEOUT] = { "timeout", BLOBMSG_TYPE_INT32 },
-	[CL_ADD_IPV4] = { "ipv4", BLOBMSG_TYPE_ARRAY },
-	[CL_ADD_IPV6] = { "ipv6", BLOBMSG_TYPE_ARRAY },
-	[CL_ADD_TCP_PORT] = { "tcp_port", BLOBMSG_TYPE_ARRAY },
-	[CL_ADD_UDP_PORT] = { "udp_port", BLOBMSG_TYPE_ARRAY },
-	[CL_ADD_DNS] = { "dns", BLOBMSG_TYPE_ARRAY },
-};
-
-
-static int
-qosify_ubus_reload(struct ubus_context *ctx, struct ubus_object *obj,
-		   struct ubus_request_data *req, const char *method,
-		   struct blob_attr *msg)
-{
-	qosify_map_reload();
-	return 0;
-}
-
-
-static int
-qosify_ubus_add(struct ubus_context *ctx, struct ubus_object *obj,
-		struct ubus_request_data *req, const char *method,
-		struct blob_attr *msg)
-{
-	int prev_timemout = qosify_map_timeout;
-	struct blob_attr *tb[__CL_ADD_MAX];
-	struct blob_attr *cur;
-	int dscp = -1;
-	int ret;
-
-	blobmsg_parse(qosify_add_policy, __CL_ADD_MAX, tb,
-		      blobmsg_data(msg), blobmsg_len(msg));
-
-	if (!strcmp(method, "add")) {
-		if ((cur = tb[CL_ADD_DSCP]) != NULL)
-			dscp = qosify_map_dscp_value(blobmsg_get_string(cur));
-		else
-			return UBUS_STATUS_INVALID_ARGUMENT;
-		if (dscp < 0)
-			return UBUS_STATUS_INVALID_ARGUMENT;
-
-		if ((cur = tb[CL_ADD_TIMEOUT]) != NULL)
-			qosify_map_timeout = blobmsg_get_u32(cur);
-	} else {
-		dscp = 0xff;
-	}
-
-	if ((cur = tb[CL_ADD_IPV4]) != NULL &&
-	    (ret = qosify_ubus_add_array(cur, dscp, CL_MAP_IPV4_ADDR) != 0))
-		return ret;
-
-	if ((cur = tb[CL_ADD_IPV6]) != NULL &&
-	    (ret = qosify_ubus_add_array(cur, dscp, CL_MAP_IPV6_ADDR) != 0))
-		return ret;
-
-	if ((cur = tb[CL_ADD_TCP_PORT]) != NULL &&
-	    (ret = qosify_ubus_add_array(cur, dscp, CL_MAP_TCP_PORTS) != 0))
-		return ret;
-
-	if ((cur = tb[CL_ADD_UDP_PORT]) != NULL &&
-	    (ret = qosify_ubus_add_array(cur, dscp, CL_MAP_UDP_PORTS) != 0))
-		return ret;
-
-	if ((cur = tb[CL_ADD_DNS]) != NULL &&
-	    (ret = qosify_ubus_add_array(cur, dscp, CL_MAP_DNS) != 0))
-		return ret;
-
-	qosify_map_timeout = prev_timemout;
-
-	return 0;
-}
-
-enum {
-	CL_CONFIG_RESET,
-	CL_CONFIG_FILES,
-	CL_CONFIG_TIMEOUT,
-	CL_CONFIG_DSCP_UDP,
-	CL_CONFIG_DSCP_TCP,
-	CL_CONFIG_DSCP_PRIO,
-	CL_CONFIG_DSCP_BULK,
-	CL_CONFIG_DSCP_ICMP,
-	CL_CONFIG_BULK_TIMEOUT,
-	CL_CONFIG_BULK_PPS,
-	CL_CONFIG_PRIO_PKT_LEN,
-	CL_CONFIG_INTERFACES,
-	CL_CONFIG_DEVICES,
-	__CL_CONFIG_MAX
-};
-
-static const struct blobmsg_policy qosify_config_policy[__CL_CONFIG_MAX] = {
-	[CL_CONFIG_RESET] = { "reset", BLOBMSG_TYPE_BOOL },
-	[CL_CONFIG_FILES] = { "files", BLOBMSG_TYPE_ARRAY },
-	[CL_CONFIG_TIMEOUT] = { "timeout", BLOBMSG_TYPE_INT32 },
-	[CL_CONFIG_DSCP_UDP] = { "dscp_default_udp", BLOBMSG_TYPE_STRING },
-	[CL_CONFIG_DSCP_TCP] = { "dscp_default_tcp", BLOBMSG_TYPE_STRING },
-	[CL_CONFIG_DSCP_PRIO] = { "dscp_prio", BLOBMSG_TYPE_STRING },
-	[CL_CONFIG_DSCP_BULK] = { "dscp_bulk", BLOBMSG_TYPE_STRING },
-	[CL_CONFIG_DSCP_ICMP] = { "dscp_icmp", BLOBMSG_TYPE_STRING },
-	[CL_CONFIG_BULK_TIMEOUT] = { "bulk_trigger_timeout", BLOBMSG_TYPE_INT32 },
-	[CL_CONFIG_BULK_PPS] = { "bulk_trigger_pps", BLOBMSG_TYPE_INT32 },
-	[CL_CONFIG_PRIO_PKT_LEN] = { "prio_max_avg_pkt_len", BLOBMSG_TYPE_INT32 },
-	[CL_CONFIG_INTERFACES] = { "interfaces", BLOBMSG_TYPE_TABLE },
-	[CL_CONFIG_DEVICES] = { "devices", BLOBMSG_TYPE_TABLE },
-};
-
-static int __set_dscp(uint8_t *dest, struct blob_attr *attr, bool reset)
-{
-	int dscp;
-
-	if (reset)
-		*dest = 0xff;
-
-	if (!attr)
-		return 0;
-
-	dscp = qosify_map_dscp_value(blobmsg_get_string(attr));
-	if (dscp < 0)
-		return -1;
-
-	*dest = dscp;
-
-	return 0;
-}
-
-static int
-qosify_ubus_config(struct ubus_context *ctx, struct ubus_object *obj,
-		   struct ubus_request_data *req, const char *method,
-		   struct blob_attr *msg)
-{
-	struct blob_attr *tb[__CL_CONFIG_MAX];
-	struct blob_attr *cur;
-	uint8_t dscp;
-	bool reset = false;
-	int ret;
-
-	blobmsg_parse(qosify_config_policy, __CL_CONFIG_MAX, tb,
-		      blobmsg_data(msg), blobmsg_len(msg));
-
-	if ((cur = tb[CL_CONFIG_RESET]) != NULL)
-		reset = blobmsg_get_bool(cur);
-
-	if (reset)
-		qosify_map_reset_config();
-
-	if ((cur = tb[CL_CONFIG_TIMEOUT]) != NULL)
-		qosify_map_timeout = blobmsg_get_u32(cur);
-
-	if ((cur = tb[CL_CONFIG_FILES]) != NULL &&
-	    (ret = qosify_ubus_set_files(cur) != 0))
-		return ret;
-
-	__set_dscp(&dscp, tb[CL_CONFIG_DSCP_UDP], true);
-	if (dscp != 0xff)
-		qosify_map_set_dscp_default(CL_MAP_UDP_PORTS, dscp);
-
-	__set_dscp(&dscp, tb[CL_CONFIG_DSCP_TCP], true);
-	if (dscp != 0xff)
-		qosify_map_set_dscp_default(CL_MAP_TCP_PORTS, dscp);
-
-	__set_dscp(&config.dscp_prio, tb[CL_CONFIG_DSCP_PRIO], reset);
-	__set_dscp(&config.dscp_bulk, tb[CL_CONFIG_DSCP_BULK], reset);
-	__set_dscp(&config.dscp_icmp, tb[CL_CONFIG_DSCP_ICMP], reset);
-
-	if ((cur = tb[CL_CONFIG_BULK_TIMEOUT]) != NULL)
-		config.bulk_trigger_timeout = blobmsg_get_u32(cur);
-
-	if ((cur = tb[CL_CONFIG_BULK_PPS]) != NULL)
-		config.bulk_trigger_pps = blobmsg_get_u32(cur);
-
-	if ((cur = tb[CL_CONFIG_PRIO_PKT_LEN]) != NULL)
-		config.prio_max_avg_pkt_len = blobmsg_get_u32(cur);
-
-	qosify_map_update_config();
-
-	qosify_iface_config_update(tb[CL_CONFIG_INTERFACES], tb[CL_CONFIG_DEVICES]);
-
-	qosify_iface_check();
-
-	return 0;
-}
-
-
-static int
-qosify_ubus_dump(struct ubus_context *ctx, struct ubus_object *obj,
-		 struct ubus_request_data *req, const char *method,
-		 struct blob_attr *msg)
-{
-	blob_buf_init(&b, 0);
-	qosify_map_dump(&b);
-	ubus_send_reply(ctx, req, b.head);
-	blob_buf_free(&b);
-
-	return 0;
-}
-
-static int
-qosify_ubus_status(struct ubus_context *ctx, struct ubus_object *obj,
-		 struct ubus_request_data *req, const char *method,
-		 struct blob_attr *msg)
-{
-	blob_buf_init(&b, 0);
-	qosify_iface_status(&b);
-	ubus_send_reply(ctx, req, b.head);
-	blob_buf_free(&b);
-
-	return 0;
-}
-
-static int
-qosify_ubus_check_devices(struct ubus_context *ctx, struct ubus_object *obj,
-			  struct ubus_request_data *req, const char *method,
-			  struct blob_attr *msg)
-{
-	qosify_iface_check();
-
-	return 0;
-}
-
-enum {
-	CL_DNS_HOST_NAME,
-	CL_DNS_HOST_TYPE,
-	CL_DNS_HOST_ADDR,
-	CL_DNS_HOST_TTL,
-	__CL_DNS_HOST_MAX
-};
-
-static const struct blobmsg_policy qosify_dns_policy[__CL_DNS_HOST_MAX] = {
-	[CL_DNS_HOST_NAME] = { "name", BLOBMSG_TYPE_STRING },
-	[CL_DNS_HOST_TYPE] = { "type", BLOBMSG_TYPE_STRING },
-	[CL_DNS_HOST_ADDR] = { "address", BLOBMSG_TYPE_STRING },
-	[CL_DNS_HOST_TTL] = { "ttl", BLOBMSG_TYPE_INT32 },
-};
-
-static int
-qosify_ubus_add_dns_host(struct ubus_context *ctx, struct ubus_object *obj,
-			 struct ubus_request_data *req, const char *method,
-			 struct blob_attr *msg)
-{
-	struct blob_attr *tb[__CL_DNS_HOST_MAX];
-	struct blob_attr *cur;
-	uint32_t ttl = 0;
-
-	blobmsg_parse(qosify_dns_policy, __CL_DNS_HOST_MAX, tb,
-		      blobmsg_data(msg), blobmsg_len(msg));
-
-	if (!tb[CL_DNS_HOST_NAME] || !tb[CL_DNS_HOST_TYPE] ||
-	    !tb[CL_DNS_HOST_ADDR])
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	if ((cur = tb[CL_DNS_HOST_TTL]) != NULL)
-		ttl = blobmsg_get_u32(cur);
-
-	if (qosify_map_add_dns_host(blobmsg_get_string(tb[CL_DNS_HOST_NAME]),
-				    blobmsg_get_string(tb[CL_DNS_HOST_ADDR]),
-				    blobmsg_get_string(tb[CL_DNS_HOST_TYPE]),
-				    ttl))
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	return 0;
-}
-
-static const struct ubus_method qosify_methods[] = {
-	UBUS_METHOD_NOARG("reload", qosify_ubus_reload),
-	UBUS_METHOD("add", qosify_ubus_add, qosify_add_policy),
-	UBUS_METHOD_MASK("remove", qosify_ubus_add, qosify_add_policy,
-			 ((1 << __CL_ADD_MAX) - 1) & ~(1 << CL_ADD_DSCP)),
-	UBUS_METHOD("config", qosify_ubus_config, qosify_config_policy),
-	UBUS_METHOD_NOARG("dump", qosify_ubus_dump),
-	UBUS_METHOD_NOARG("status", qosify_ubus_status),
-	UBUS_METHOD("add_dns_host", qosify_ubus_add_dns_host, qosify_dns_policy),
-	UBUS_METHOD_NOARG("check_devices", qosify_ubus_check_devices),
-};
-
-static struct ubus_object_type qosify_object_type =
-	UBUS_OBJECT_TYPE("qosify", qosify_methods);
-
-static struct ubus_object qosify_object = {
-	.name = "qosify",
-	.type = &qosify_object_type,
-	.methods = qosify_methods,
-	.n_methods = ARRAY_SIZE(qosify_methods),
-};
-
-static void
-ubus_connect_handler(struct ubus_context *ctx)
-{
-	ubus_add_object(ctx, &qosify_object);
-}
-
-static struct ubus_auto_conn conn;
-
-int qosify_ubus_init(void)
-{
-	conn.cb = ubus_connect_handler;
-	ubus_auto_connect(&conn);
-
-	return 0;
-}
-
-void qosify_ubus_stop(void)
-{
-	ubus_auto_shutdown(&conn);
-}
-
-struct iface_req {
-	char *name;
-	int len;
-};
-
-static void
-netifd_if_cb(struct ubus_request *req, int type, struct blob_attr *msg)
-{
-	struct iface_req *ifr = req->priv;
-	enum {
-		IFS_ATTR_UP,
-		IFS_ATTR_DEV,
-		__IFS_ATTR_MAX
-	};
-	static const struct blobmsg_policy policy[__IFS_ATTR_MAX] = {
-		[IFS_ATTR_UP] = { "up", BLOBMSG_TYPE_BOOL },
-		[IFS_ATTR_DEV] = { "l3_device", BLOBMSG_TYPE_STRING },
-	};
-	struct blob_attr *tb[__IFS_ATTR_MAX];
-
-	blobmsg_parse(policy, __IFS_ATTR_MAX, tb, blobmsg_data(msg), blobmsg_len(msg));
-
-	if (!tb[IFS_ATTR_UP] || !tb[IFS_ATTR_DEV])
-		return;
-
-	if (!blobmsg_get_bool(tb[IFS_ATTR_UP]))
-		return;
-
-	snprintf(ifr->name, ifr->len, "%s", blobmsg_get_string(tb[IFS_ATTR_DEV]));
-}
-
-int qosify_ubus_check_interface(const char *name, char *ifname, int ifname_len)
-{
-	struct iface_req req = { ifname, ifname_len };
-	char *obj_name = "network.interface.";
-	uint32_t id;
-
-#define PREFIX "network.interface."
-	obj_name = alloca(sizeof(PREFIX) + strlen(name) + 1);
-	sprintf(obj_name, PREFIX "%s", name);
-#undef PREFIX
-
-	ifname[0] = 0;
-
-	if (ubus_lookup_id(&conn.ctx, obj_name, &id))
-		return -1;
-
-	ubus_invoke(&conn.ctx, id, "status", b.head, netifd_if_cb, &req, 1000);
-
-	if (!ifname[0])
-		return -1;
-
-	return 0;
-}

feeds/ucentral/ucentral-client/Makefile

@@ -4,9 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/blogic/ucentral-client.git
+PKG_MIRROR_HASH:=37a1b7393cf5d15dbcd4840d9ffb2b16bf5b43cdd5c0da955c744bfc10211cbc
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-01-10
-PKG_SOURCE_VERSION:=e3b71c61e1a07bb3b5fa34fe835fd8f6f708caa3
+PKG_SOURCE_VERSION:=6cb4485ab49c5ab9244fb55af9fd0e1801f154f4
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/init.d/ucentral

@@ -32,8 +32,6 @@ start_service() {
 	config_get debug 'config' 'debug' 0
 	config_get insecure 'config' 'insecure' 0
 
-	interval=$(uci get ustats.health.interval)
-
 	procd_open_instance
 	procd_set_param command "$PROG"
 	[ -n "$serial" ] && procd_append_param command -S $serial
@@ -41,7 +39,6 @@ start_service() {
 	[ -n "$port" ] && procd_append_param command -P $port
 	[ "$debug" -eq 0 ] || procd_append_param command -d
 	[ "$insecure" -eq 0 ] || procd_append_param command -i
-	[ -z "$interval" ] || procd_append_param command -H $interval
 	[ -z "$(mount | grep 'tmpfs on / type tmpfs')" ] || procd_append_param command -r
 	procd_append_param command -f "$(cat /tmp/ucentral.version)"
 	procd_set_param respawn 3600 5 0

feeds/ucentral/ucentral-client/files/etc/init.d/uhealth

@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+USE_PROCD=1
+PROG=/usr/share/ucentral/health.uc
+
+boot() {
+	# dummy stub to make sure health does not start before
+	# a config is applied
+	true
+}
+
+service_triggers() {
+	procd_add_reload_trigger ustats
+}
+
+start_service() {
+	. /lib/functions.sh
+	config_load 'ustats'
+	config_get interval 'health' 'interval' 120
+
+	[ "$interval" -eq 0 ] || {
+		procd_open_instance
+		procd_set_param command "$PROG"
+		procd_set_param respawn 1 $interval 0
+		procd_close_instance
+	}
+}

feeds/ucentral/ucentral-client/files/etc/init.d/ustats

@@ -20,9 +20,4 @@ start_service() {
 		procd_set_param respawn 1 $interval 0
 		procd_close_instance
 	}
-
-        config_get interval 'health' 'interval' 0
-	[ "$interval" -eq 0 ] || {
-		ubus call ucentral config '{"health": '$interval' }'
-	}
 }

feeds/ucentral/ucentral-event/Makefile

@@ -4,9 +4,10 @@ PKG_NAME:=ucentral-event
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/blogic/ucentral-event.git
+PKG_MIRROR_HASH:=8cb470d7cc6c458fe748ee6f54e4bf79bec5500735d7b992d83c1aa10f700c6b
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-04-13
-PKG_SOURCE_VERSION:=7b0d136e8556bb099d7032823139d275448714cb
+PKG_SOURCE_VERSION:=24b7fb36e456d99b470c212674b3bf50bac64c74
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

feeds/ucentral/ucentral-schema/Makefile

@@ -4,9 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/blogic/ucentral-schema.git
+PKG_MIRROR_HASH:=af89f22de096e860cfe5295837507d288d7c919d1cb61d7deca012895ed80321
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-01-17
-PKG_SOURCE_VERSION:=07cb6e9fc7a4a8f9868e6efd29edcaf1f3245716
+PKG_SOURCE_VERSION:=7015febc04ad70a956b1ad79f2911bbdc24458a5
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

feeds/ucentral/ucentral-schema/files/etc/init.d/onlinecheck

@@ -6,7 +6,7 @@ USE_PROCD=1
 PROG=/usr/bin/ucode
 
 start_service() {
-	local interval=$(uci get onlinecheck.@config.check_interval)
+	local interval=$(uci get onlinecheck.@config[-1].check_interval)
 	procd_open_instance
 	procd_set_param command "$PROG" -m uci -m fs -i /usr/share/ucentral/onlinecheck.uc
 	procd_set_param respawn 1 $interval 0

feeds/ucentral/ucentral-schema/files/etc/ucentral/examples/online-check.json

@@ -97,7 +97,7 @@
 		"online-check": {
 			"ping-hosts": [
 				"192.168.178.1",
-				"uecntral.io"
+				"ucentral.io"
 			],
 			"download-hosts": [
 				"ucentral.io"

feeds/ucentral/ucentral-schema/files/etc/ucentral/ucentral.cfg.0000000001

@@ -3,12 +3,12 @@
 	"radios": [
 		{
 			"band": "2G",
-			"country": "CA",
+			"country": "US",
 			"channel-mode": "HE",
 			"channel-width": 40
 		}, {
 			"band": "5G",
-			"country": "CA",
+			"country": "US",
 			"channel-mode": "HE",
 			"channel-width": 80
 		}

feeds/ucentral/ucentral-schema/files/usr/bin/tcpdump_timeout

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+n=$1
+shift
+
+if [ $n -eq 0]; then
+	tcpdump $@
+else
+	tcpdump $@ &
+	x=$!
+	sleep $n
+	kill $x
+fi

feeds/ucentral/ucentral-schema/files/usr/share/ucentral/wifi_max_user.uc

@@ -0,0 +1,16 @@
+#!/usr/bin/ucode -R
+
+let nl = require("nl80211");
+let def = nl.const;
+
+function phy_get() {
+	let res = nl.request(def.NL80211_CMD_GET_WIPHY, def.NLM_F_DUMP, { split_wiphy_dump: true });
+
+	if (res === false)
+		warn("Unable to lookup phys: " + nl.error() + "\n");
+
+	return res;
+}
+
+let phys = phy_get();
+printf("%d\n", phys[0].max_ap_assoc);

feeds/ucentral/ucentral-tools/Makefile

@@ -4,6 +4,7 @@ PKG_NAME:=ucentral-tools
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/blogic/ucentral-tools.git
+PKG_MIRROR_HASH:=9ae6a0cd431595871c233550427c4043c2ba7ddb3c5d87e46ab74a03b2b5a947
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-01-28
 PKG_SOURCE_VERSION:=b013fc636e48d407870a46aaa68a09ed74de8d6f

feeds/ucentral/ucentral-wifi/Makefile

@@ -4,9 +4,11 @@ PKG_NAME:=ucentral-wifi
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/blogic/ucentral-wifi.git
+PKG_MIRROR_HASH:=8e730a37026a37f113038ae27489bb92104d0a091403b7cc1f379188dddd2699
+#PKG_MIRROR_HASH:=b6a3bfbd0823c54bb6fb3899e583db8580474a24c1b238d97be152ea8eccf6e5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-01-10
-PKG_SOURCE_VERSION:=955fed125e0597dda14cf52fb7224991072d6146
+PKG_SOURCE_VERSION:=aa9c3ee716929d75852a11640362a09bb32c5262
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

feeds/ucentral/ucode/Makefile

@@ -12,9 +12,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=https://github.com/jow-/ucode.git
+PKG_MIRROR_HASH:=376b89c35967d3761acb192af9fb6b7b20dbcc50d03c8ed851751d2376bf26b4
 PKG_SOURCE_DATE:=2021-07-30
-PKG_SOURCE_VERSION:=03b6a8efc1834a4114f0d11e1a7cecff3242b305
-PKG_MIRROR_HASH:=6af37293d6d7023f30728c76a02b4e48d323262a45058410760a30256e0dbe2b
+PKG_SOURCE_VERSION:=8fd4746da31b945a6259ac846f7cf8dcfef0b1ef
 PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
 PKG_LICENSE:=ISC
 

feeds/ucentral/ucode/patches/0001-fixes.patch

@@ -1,15 +1,15 @@
-From 1c89014c7c0e68e1eeb851ea538fb67a57988dd4 Mon Sep 17 00:00:00 2001
+From 25df1c3e41f274f70e4fbf5fdc10e4290ba019f5 Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Thu, 20 Jan 2022 10:48:35 +0100
-Subject: [PATCH 1/2] fixes
+Subject: [PATCH] fixes
 
 ---
- lib/nl80211.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++----
+ lib/nl80211.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++----
  lib/rtnl.c    |  1 +
- 2 files changed, 69 insertions(+), 5 deletions(-)
+ 2 files changed, 87 insertions(+), 6 deletions(-)
 
 diff --git a/lib/nl80211.c b/lib/nl80211.c
-index fc24fb8..e308ebc 100644
+index fc24fb8..3e21141 100644
 --- a/lib/nl80211.c
 +++ b/lib/nl80211.c
 @@ -45,6 +45,8 @@ limitations under the License.
@@ -132,7 +132,7 @@ index fc24fb8..e308ebc 100644
  	.attrs = {
  		{ NL80211_STA_INFO_INACTIVE_TIME, "inactive_time", DT_U32, 0, NULL },
  		{ NL80211_STA_INFO_RX_BYTES, "rx_bytes", DT_U32, 0, NULL },
-@@ -724,15 +783,16 @@ static const uc_nl_nested_spec_t nl80211_sta_info_nla = {
+@@ -724,21 +783,37 @@ static const uc_nl_nested_spec_t nl80211_sta_info_nla = {
  		{ NL80211_STA_INFO_NONPEER_PM, "nonpeer_pm", DT_U32, 0, NULL },
  		{ NL80211_STA_INFO_CHAIN_SIGNAL, "chain_signal", DT_S8, DF_MULTIPLE|DF_AUTOIDX, NULL },
  		{ NL80211_STA_INFO_CHAIN_SIGNAL_AVG, "chain_signal_avg", DT_S8, DF_MULTIPLE|DF_AUTOIDX, NULL },
@@ -149,10 +149,41 @@ index fc24fb8..e308ebc 100644
  		{ NL80211_STA_INFO_CONNECTED_TO_AS, "connected_to_as", DT_BOOL, 0, NULL },
  		{ NL80211_STA_INFO_CONNECTED_TO_GATE, "connected_to_gate", DT_BOOL, 0, NULL },
 +		{ NL80211_STA_INFO_CONNECTED_TIME, "connected_time", DT_U32, 0, NULL },
++	}
++};
++
++static const uc_nl_nested_spec_t nl80211_survey_info_nla = {
++	.headsize = 0,
++	.nattrs = 8,
++	.attrs = {
++		{ NL80211_SURVEY_INFO_FREQUENCY, "frequency", DT_U32, 0, NULL },
++		{ NL80211_SURVEY_INFO_TIME, "time", DT_U64, 0, NULL },
++		{ NL80211_SURVEY_INFO_TIME_TX, "time_tx", DT_U64, 0, NULL },
++		{ NL80211_SURVEY_INFO_TIME_RX, "time_rx", DT_U64, 0, NULL },
++		{ NL80211_SURVEY_INFO_TIME_BUSY, "busy", DT_U64, 0, NULL },
++		{ NL80211_SURVEY_INFO_TIME_EXT_BUSY, "ext_busy", DT_U64, 0, NULL },
++		{ NL80211_SURVEY_INFO_TIME_SCAN, "scan", DT_U64, 0, NULL },
++		{ NL80211_SURVEY_INFO_NOISE, "noise", DT_U8, 0, NULL },
  	}
  };
  
-@@ -1044,6 +1104,9 @@ uc_nl_parse_attrs(struct nl_msg *msg, char *base, const uc_nl_attr_spec_t *attrs
+ static const uc_nl_nested_spec_t nl80211_msg = {
+ 	.headsize = 0,
+-	.nattrs = 124,
++	.nattrs = 126,
+ 	.attrs = {
+ 		{ NL80211_ATTR_4ADDR, "4addr", DT_U8, 0, NULL },
+ 		{ NL80211_ATTR_AIRTIME_WEIGHT, "airtime_weight", DT_U16, 0, NULL },
+@@ -864,6 +939,8 @@ static const uc_nl_nested_spec_t nl80211_msg = {
+ 		{ NL80211_ATTR_WPA_VERSIONS, "wpa_versions", DT_U32, 0, NULL },
+ 		{ NL80211_ATTR_SUPPORTED_IFTYPES, "supported_iftypes", DT_NESTED, 0, &nl80211_ifcomb_limit_types_nla },
+ 		{ NL80211_ATTR_SOFTWARE_IFTYPES, "software_iftypes", DT_NESTED, 0, &nl80211_ifcomb_limit_types_nla },
++		{ NL80211_ATTR_MAX_AP_ASSOC_STA, "max_ap_assoc", DT_U16, 0, NULL },
++		{ NL80211_ATTR_SURVEY_INFO, "survey_info", DT_NESTED, 0, &nl80211_survey_info_nla },
+ 	}
+ };
+ 
+@@ -1044,6 +1121,9 @@ uc_nl_parse_attrs(struct nl_msg *msg, char *base, const uc_nl_attr_spec_t *attrs
  	bool exists;
  
  	for (i = 0; i < nattrs; i++) {

feeds/ucentral/ucode/patches/0002-add-os-library.patch

@@ -1,213 +0,0 @@
-From 9c77d85f8e121bf0994eb4bc572eea5cf093f0c6 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 25 Jan 2022 16:54:48 +0100
-Subject: [PATCH] add os library
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- CMakeLists.txt |   7 +++
- lib/os.c       | 167 +++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 174 insertions(+)
- create mode 100644 lib/os.c
-
-diff --git a/CMakeLists.txt b/CMakeLists.txt
-index 7c84fc3..f7d4f83 100644
---- a/CMakeLists.txt
-+++ b/CMakeLists.txt
-@@ -27,6 +27,7 @@ OPTION(RTNL_SUPPORT "Route Netlink plugin support" ON)
- OPTION(NL80211_SUPPORT "Wireless Netlink plugin support" ON)
- OPTION(RESOLV_SUPPORT "NS resolve plugin support" ON)
- OPTION(STRUCT_SUPPORT "Struct plugin support" ON)
-+OPTION(OS_SUPPORT "OS plugin support" ON)
- 
- SET(LIB_SEARCH_PATH "${CMAKE_INSTALL_PREFIX}/lib/ucode/*.so:${CMAKE_INSTALL_PREFIX}/share/ucode/*.uc:./*.so:./*.uc" CACHE STRING "Default library search path")
- STRING(REPLACE ":" "\", \"" LIB_SEARCH_DEFINE "${LIB_SEARCH_PATH}")
-@@ -143,6 +144,12 @@ IF(NL80211_SUPPORT)
-   TARGET_LINK_LIBRARIES(nl80211_lib ${nl})
- ENDIF()
- 
-+IF(OS_SUPPORT)
-+  SET(LIBRARIES ${LIBRARIES} os_lib)
-+  ADD_LIBRARY(os_lib MODULE lib/os.c)
-+  SET_TARGET_PROPERTIES(os_lib PROPERTIES OUTPUT_NAME os PREFIX "")
-+ENDIF()
-+
- IF(RESOLV_SUPPORT)
-   SET(LIBRARIES ${LIBRARIES} resolv_lib)
-   ADD_LIBRARY(resolv_lib MODULE lib/resolv.c)
-diff --git a/lib/os.c b/lib/os.c
-new file mode 100644
-index 0000000..cebad15
---- /dev/null
-+++ b/lib/os.c
-@@ -0,0 +1,167 @@
-+#include <glob.h>
-+#include <stdio.h>
-+#include <stdint.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <unistd.h>
-+#include <ctype.h>
-+#include <libgen.h>
-+#include <fcntl.h>
-+#include <sys/types.h>
-+#include <regex.h>
-+
-+#include <sys/sysinfo.h>
-+
-+#include "ucode/module.h"
-+
-+static regex_t pat_vmdata, pat_vmstk;
-+static struct sysinfo info;
-+static long systick;
-+
-+static void __attribute__((constructor))
-+measure_init()
-+{
-+	regcomp(&pat_vmdata, "VmData:[ \t]*([0-9]*) kB", REG_EXTENDED);
-+	regcomp(&pat_vmstk, "VmStk:[ \t]*([0-9]*) kB", REG_EXTENDED);
-+	sysinfo(&info);
-+	systick = sysconf(_SC_CLK_TCK);
-+}
-+
-+static void __attribute__((destructor))
-+measure_fini()
-+{
-+	regfree(&pat_vmdata);
-+	regfree(&pat_vmstk);
-+}
-+
-+static char *
-+strnchr(char *buf, int c, int i)
-+{
-+	while (*buf && i) {
-+		buf = strchr(buf, c);
-+		buf++;
-+		i--;
-+	}
-+	return buf;
-+}
-+
-+static int
-+measure_process(uc_value_t *obj, pid_t pid)
-+{
-+	int fd;
-+	char buffer[512] = "";
-+	ssize_t rxed;
-+	regmatch_t matches[2];
-+	glob_t gl;
-+	size_t i;
-+	char *ch;
-+
-+	uint32_t fdcount = 0;
-+	uint32_t mem = 0;
-+
-+	snprintf(buffer, sizeof(buffer), "/proc/%i/fd/*", (int)pid);
-+
-+	if (glob(buffer, GLOB_NOESCAPE | GLOB_MARK, NULL, &gl))
-+		return -1;
-+
-+	for (i = 0; i < gl.gl_pathc; i++)
-+		if (isdigit(basename(gl.gl_pathv[i])[0]))
-+			fdcount = fdcount + 1;
-+	globfree(&gl);
-+	ucv_object_add(obj, "fd", ucv_int64_new(fdcount));
-+
-+	snprintf(buffer, sizeof(buffer), "/proc/%i/stat", (int)pid);
-+	fd = open(buffer, O_RDONLY);
-+	if (fd == -1)
-+		return -1;
-+
-+	rxed = read(fd, buffer, sizeof(buffer) - 1);
-+	close(fd);
-+	if (rxed == -1)
-+		return -1;
-+
-+	buffer[rxed] = 0;
-+
-+	ch = strnchr(buffer, ' ', 14);
-+	if (ch)
-+		ucv_object_add(obj, "load", ucv_int64_new(atoll(ch)));
-+
-+	ch = strnchr(buffer, ' ', 21);
-+	if (ch)
-+		ucv_object_add(obj, "age", ucv_int64_new(info.uptime - atol(ch) / systick));
-+
-+	snprintf(buffer, sizeof(buffer), "/proc/%i/status", (int)pid);
-+	fd = open(buffer, O_RDONLY);
-+	if (fd == -1)
-+		return -1;
-+
-+	rxed = read(fd, buffer, sizeof(buffer) - 1);
-+	close(fd);
-+	if (rxed == -1)
-+		return -1;
-+
-+	buffer[rxed] = 0;
-+
-+	if (!regexec(&pat_vmdata, buffer, 2, matches, 0))
-+		mem += atoi(buffer + matches[1].rm_so) * 1024;
-+
-+	if (!regexec(&pat_vmstk, buffer, 2, matches, 0))
-+		mem += atoi(buffer + matches[1].rm_so) * 1024;
-+
-+	ucv_object_add(obj, "memory", ucv_int64_new(mem));
-+
-+	return 0;
-+}
-+
-+static uc_value_t *
-+uc_system_hostname(uc_vm_t *vm, size_t nargs)
-+{
-+	char buf[255] = {};
-+
-+	if (gethostname(buf, sizeof(buf)) < 0)
-+		return NULL;
-+
-+	return ucv_string_new(buf);
-+}
-+
-+static uc_value_t *
-+uc_system_loadavg(uc_vm_t *vm, size_t nargs)
-+{
-+	uc_value_t *res_obj = NULL;
-+	int i;
-+
-+	sysinfo(&info);
-+
-+	res_obj = ucv_array_new(vm);
-+	for (i = 0; i < 3; i++)
-+		ucv_array_push(res_obj, ucv_double_new(((double) info.loads[i]) / 65535.0f));
-+
-+	return res_obj;
-+}
-+
-+static uc_value_t *
-+uc_system_process(uc_vm_t *vm, size_t nargs)
-+{
-+	uc_value_t *pid = uc_fn_arg(0);
-+	uc_value_t *res_obj = NULL;
-+
-+	if (ucv_type(pid) != UC_INTEGER)
-+		return NULL;
-+
-+	res_obj = ucv_object_new(vm);
-+
-+	measure_process(res_obj, ucv_uint64_get(pid));
-+
-+	return res_obj;
-+}
-+
-+static const uc_function_list_t system_fns[] = {
-+	{ "hostname",	uc_system_hostname },
-+	{ "loadavg",	uc_system_loadavg },
-+	{ "process",	uc_system_process },
-+};
-+
-+void uc_module_init(uc_vm_t *vm, uc_value_t *scope)
-+{
-+	uc_function_list_register(scope, system_fns);
-+}
--- 
-2.25.1
-

feeds/ucentral/udevmand/Makefile

@@ -5,6 +5,7 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=https://github.com/blogic/udevmand.git
+PKG_MIRROR_HASH:=25e47c7f3d454cc5eba4e9c19fc9da8431e3c2b1b97b8f0f49798f51c2722df7
 PKG_SOURCE_DATE:=20220112
 PKG_SOURCE_VERSION:=065f75cb88aa317441adffeddc8d5302cfaafc8a
 CMAKE_INSTALL:=1

feeds/ucentral/udhcpsnoop/Makefile

@@ -7,6 +7,7 @@ PKG_LICENSE:=GPL-2.0
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 
 PKG_SOURCE_URL=https://github.com/blogic/udhcpsnoop.git
+PKG_MIRROR_HASH:=721f005e51c46b9381f3e5a6576b8a31afd3903ddb0e7b569d7337a57ca33dd2
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-04-12
 PKG_SOURCE_VERSION:=b86639904147a40be32ac43cd89c21109ffc3543

feeds/ucentral/udnssnoop/Makefile

@@ -7,6 +7,7 @@ PKG_LICENSE:=GPL-2.0
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 
 PKG_SOURCE_URL=https://github.com/blogic/udnssnoop.git
+PKG_MIRROR_HASH:=afd17cc6aed4a151bc0f437b84491d751932a39f93f429418200e9e8be53dfad
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-04-12
 PKG_SOURCE_VERSION:=67e1e5f0bfc12222aa59c54e7066b1c00a680e56

feeds/ucentral/usteer/Makefile

@@ -4,6 +4,7 @@ PKG_NAME:=usteer
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://git.openwrt.org/project/usteer.git
+PKG_MIRROR_HASH:=34a9f2867b3e9050d4707b986481681f97f6fad71bc3fb3276fa3c3b26e2ab67
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-04-19
 PKG_SOURCE_VERSION:=f42bf2962edd0199e4c96ebf19933b2846bcce27

feeds/wifi-ath10k/ath10k-ct/Makefile

@@ -7,6 +7,7 @@ PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
+PKG_MIRROR_HASH:=37b4f00231cb0ae00f63da1c94ae53c940c76d047ce0fb081c08a35fffbfd2c0
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2021-05-22b
 PKG_SOURCE_VERSION:=54a9ac02f1139596ea4361ebbc3e444955d86cfd

feeds/wifi-ath10k/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -132,7 +132,7 @@ mac80211_hostapd_setup_base() {
 
 	json_select config
 
-	[ "$auto_channel" -gt 0 ] && channel=acs_survey
+	[ "$auto_channel" -gt 0 ] && channel=0
 
 	[ "$auto_channel" -gt 0 ] && json_get_vars acs_exclude_dfs
 	[ -n "$acs_exclude_dfs" ] && [ "$acs_exclude_dfs" -gt 0 ] &&
@@ -1162,10 +1162,13 @@ drv_mac80211_setup() {
 		if [ "$no_reload" != "0" ]; then
 			add_ap=1
 			ubus wait_for hostapd
-			local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")"
+			local hostapd_res
+			[ -f /tmp/wifi_fail_test ] || hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")"
 			ret="$?"
+			rm -f /tmp/wifi_fail_test
 			[ "$ret" != 0 -o -z "$hostapd_res" ] && {
-				wireless_setup_failed HOSTAPD_START_FAILED
+				logger failed to start wifi trying again
+			#	wireless_setup_failed HOSTAPD_START_FAILED
 				return
 			}
 			wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1

feeds/wifi-ax/ath11k-firmware/Makefile

@@ -20,6 +20,12 @@ $(Package/ath11k-firmware-default)
   DEPENDS:=@TARGET_ipq807x_ipq50xx
 endef
 
+define Package/ath11k-firmware-ipq50xx-spruce
+$(Package/ath11k-firmware-default)
+  TITLE:=ath11k firmware for IPQ50xx devices with spruce
+  DEPENDS:=@TARGET_ipq807x_ipq50xx
+endef
+
 define Package/ath11k-firmware-ipq60xx
 $(Package/ath11k-firmware-default)
   TITLE:=ath11k firmware for IPQ60xx devices
@@ -48,6 +54,10 @@ define Package/ath11k-firmware-ipq50xx/description
 Standard ath11k firmware for IPQ50xx from QCA
 endef
 
+define Package/ath11k-firmware-ipq50xx-spruce/description
+Standard ath11k firmware for IPQ50xx/spruce from QCA
+endef
+
 define Package/ath11k-firmware-ipq60xx/description
 Standard ath11k firmware for IPQ60xx from QCA
 endef
@@ -74,6 +84,12 @@ define Package/ath11k-firmware-ipq50xx/install
 		$(1)/lib/firmware/IPQ5018/
 endef
 
+define Package/ath11k-firmware-ipq50xx-spruce/install
+	$(INSTALL_DIR) $(1)/lib/firmware/IPQ5018
+	$(INSTALL_DATA) ./files/IPQ5018_spruce/* \
+		$(1)/lib/firmware/IPQ5018/
+endef
+
 define Package/ath11k-firmware-ipq60xx/install
 	$(INSTALL_DIR) $(1)/lib/firmware/IPQ6018
 	$(INSTALL_DATA) ./files/IPQ6018/* \
@@ -87,6 +103,7 @@ define Package/ath11k-firmware-ipq807x/install
 endef
 
 define Package/ath11k-firmware-qcn6122/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122
 	$(INSTALL_DIR) $(1)/lib/firmware/qcn6122
 	$(INSTALL_DATA) ./files/QCN6122/* \
 		$(1)/lib/firmware/qcn6122/
@@ -99,6 +116,7 @@ define Package/ath11k-firmware-qcn9000/install
 endef
 
 $(eval $(call BuildPackage,ath11k-firmware-ipq50xx))
+$(eval $(call BuildPackage,ath11k-firmware-ipq50xx-spruce))
 $(eval $(call BuildPackage,ath11k-firmware-ipq60xx))
 $(eval $(call BuildPackage,ath11k-firmware-ipq807x))
 $(eval $(call BuildPackage,ath11k-firmware-qcn6122))

feeds/wifi-ax/ath11k-firmware/files/IPQ5018_spruce/fw_version.txt

@@ -0,0 +1 @@
+WLAN.HK.2.5.r4-00745-QCAHKSWPL_SILICONZ-1 v1

feeds/wifi-ax/ath11k-firmware/files/IPQ5018_spruce/m3_fw.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/m3_fw.b00
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/m3_fw.b01
+build/ms/bin/5018.wlanfw2.map_spr_spr_eval_cs/PIL_IMAGES/m3_fw.b02