Merge pull request #508 from Telecominfraproject/v2.8.0-rc3

V2.8.0 rc3

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm' ]
+        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196', 'cig_wf610d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650' ]
 
     steps:
     - uses: actions/checkout@v3

feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds

@@ -50,6 +50,7 @@ glinet,ax1800|\
 glinet,axt1800)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
 	;;
+yuncore,fap650|\
 muxi,ap3220l)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -59,6 +59,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
+	yuncore,fap650)
+		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
+		ucidef_set_interface_wan "eth4"
+		;;
 	qcom,ipq807x-hk14)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -116,6 +116,7 @@ case "$FIRMWARE" in
 	xiaomi,ax1800|\
 	glinet,ax1800|\
 	yuncore,ax840|\
+	yuncore,fap650|\
 	plasmacloud,pax1800-v1|\
 	plasmacloud,pax1800-v2)
                 caldata_extract "0:ART" 0x1000 0x20000  
@@ -193,7 +194,8 @@ ath11k-macs)
 		ath11k_generate_macs
 		;;
 	cig,wf194c|\
-	cig,wf194c)
+	cig,wf194c4|\
+	cig,wf196)
 		ath11k_generate_macs_wf194
 		;;
 	plasmacloud,pax1800-v1|\

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-yuncore-fap650.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts

@@ -0,0 +1,423 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP03-C1";
+	compatible = "yuncore,fap650", "qcom,ipq6018-cp03", "qcom,ipq6018";
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	aliases {
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+#endif
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_sys {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_5g {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_2g {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+		};
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x1e>; /* lan port bitmap */
+		switch_wan_bmp = <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+			port@4 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led@32 {
+			label = "green:power";
+			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@35 {
+			label = "green:wifi5";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@37 {
+			label = "green:wifi2";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -185,3 +185,13 @@ define Device/meshpp_s618_cp01
   DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
 endef
 TARGET_DEVICES += meshpp_s618_cp01
+
+define Device/yuncore_fap650
+  DEVICE_TITLE := YunCore FAP 650
+  DEVICE_DTS := qcom-ipq6018-yuncore-fap650
+  SUPPORTED_DEVICES := yuncore,fap650
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-yuncore-fap650
+endef
+TARGET_DEVICES += yuncore_fap650
+

feeds/ucentral/atfpolicy/files/atfpolicy.init

@@ -52,6 +52,6 @@ start_service() {
 }
 
 service_started() {
-	ubus -t 10 wait_for atfpolicy
+	ubus -t 2 wait_for atfpolicy
 	[ $? = 0 ] && reload_service
 }

feeds/ucentral/ratelimit/files/usr/libexec/ratelimit.sh

@@ -3,7 +3,7 @@
 case $2 in
 AP-STA-CONNECTED)
 	[ $4 = 0 -o $5 = 0 ] && {
-		ubus call ratelimit client_set '{"device": "'$1'", "address": "'$3'", "defaults": "'$(ubus call wifi iface | jsonfilter -e "@.$1.ssid")'" }'
+		ubus call ratelimit client_set '{"device": "'$1'", "address": "'$3'", "defaults": "'$(ubus call wifi iface | jsonfilter -e "@['$1'].ssid")'" }'
 		logger ratelimit addclient $1 $3 $ssid
 		return
 	}

feeds/ucentral/ucentral-schema/Makefile

@@ -4,9 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
+PKG_MIRROR_HASH:=7dc3e99b5b5937b230a465486fa4ac0f6a25ce2e6d6adf8c6999a32408cd293d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2022-05-29
-PKG_SOURCE_VERSION:=084fa1a01d0acbdd8fc8e110b9519efb6e32ee8f
+PKG_SOURCE_VERSION:=39dad34a2c866ddc77443c54e930a3efcff9b463
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

feeds/ucentral/uspot/Makefile

@@ -13,7 +13,7 @@ define Package/uspot
   SECTION:=net
   CATEGORY:=Network
   TITLE:=hotspot daemon
-  DEPENDS:=+spotfilter +uhttpd-mod-ucode +libradcli
+  DEPENDS:=+spotfilter +uhttpd-mod-ucode +libradcli +iptables-mod-conntrack-extra +conntrack
 endef
 
 define Package/uspot/install

feeds/ucentral/uspot/files/usr/share/uspot/accounting.uc

@@ -56,20 +56,15 @@ function radius_call(mac, payload) {
 	system('/usr/bin/radius-client /tmp/acct' + mac + '.json');
 }
 
-function radius_stop(mac) {
+function radius_stop(mac, payload) {
 	if (!radius_available(mac))
 		return;
 	debug(mac, 'stopping accounting');
+	ubus.call('spotfilter', 'client_set', payload);
+	system('conntrack -D -s ' + clients[mac].ip4addr  + ' -m 2');
 	if (clients[mac].accounting)
 		clients[mac].timeout.cancel();
-
+	delete clients[mac];
-	let payload = {
-		acct: true,
-		acct_type: 8,
-		terminate_cause: 0,
-	};
-	radius_init(mac, payload);
-	radius_call(mac, payload);
 }
 
 function radius_acct(mac, payload) {
@@ -122,7 +117,7 @@ function radius_logoff(mac) {
 		return;
 	let payload = {
 		acct_type: 2,
-		terminate_cause: 0,
+		terminate_cause: 1,
 	};
 	radius_acct(mac, payload);
 }
@@ -174,6 +169,10 @@ function client_add(mac, state) {
 		idle,
 		max_total,
 	};
+	if (state.ip4addr)
+		clients[mac].ip4addr = state.ip4addr;
+	if (state.ip6addr)
+		clients[mac].ip6addr = state.ip6addr;
 	if (state.data?.radius?.request)
 		clients[mac].radius= state.data.radius.request;
 	syslog(mac, 'adding client');
@@ -183,39 +182,34 @@ function client_add(mac, state) {
 
 function client_remove(mac, reason) {
 	syslog(mac, reason);
-	radius_stop(mac);
+	radius_stop(mac, {
-	delete clients[mac];
+		interface: "hotspot",
-	ubus.call('spotfilter', 'client_remove', {
+		address: mac
-			interface: "hotspot",
+	});
-			address: mac
-		});
 }
 
 function client_flush(mac) {
 	syslog(mac, 'logoff event');
-	radius_stop(mac);
+	radius_stop(mac, {
-	ubus.call('spotfilter', 'client_set', {
+		interface: 'hotspot',
-			interface: 'hotspot',
+		address: mac,
-			address: mac,
+		state: 0,
-			state: 0,
+		dns_state: 1,
-			dns_state: 1,
+		accounting: [],
-			accounting: [],
+		flush: true
-			flush: true
+	});
-		});
 }
 
 function client_timeout(mac, reason) {
 	syslog(mac, reason);
-	radius_stop(mac);
+	radius_stop(mac, {
-	delete clients[mac];
+		interface: "hotspot",
-	ubus.call('spotfilter', 'client_set', {
+		state: 0,
-			interface: "hotspot",
+		dns_state: 1,
-			state: 0,
+		address: mac,
-			dns_state: 1,
+		accounting: [],
-			address: mac,
+		flush: true,
-			accounting: [],
+	});
-			flush: true,
-		});
 }
 
 uloop.init();

feeds/ucentral/uspot/files/usr/share/uspot/firewall.ipt

@@ -0,0 +1,3 @@
+*mangle
+-A POSTROUTING -m mark --mark 0x2 -j CONNMARK --set-mark 0x2
+COMMIT

feeds/wifi-ax/ath11k-wifi/Makefile

@@ -47,6 +47,7 @@ ALLWIFIBOARDS:= \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
+	yuncore-fap650 \
 	meshpp-s618
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ath11k-wifi-$(BOARD))
@@ -254,6 +255,7 @@ $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))
 $(eval $(call generate-ath11k-wifi-package,meshpp-s618,Mesh++ S618))
 $(eval $(call generate-ath11k-wifi-package,muxi-ap3220l,MUXI AP3220L))
+$(eval $(call generate-ath11k-wifi-package,yuncore-fap650,YunCore FAP650))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))

feeds/wifi-ax/hostapd/files/hostapd.sh

@@ -552,11 +552,13 @@ append_radius_server() {
 	json_get_vars \
 		auth_server auth_secret auth_port \
 		dae_client dae_secret dae_port \
-		ownip radius_client_addr \
+		dynamic_ownip ownip radius_client_addr \
 		eap_reauth_period request_cui \
 		erp_domain mobility_domain \
 		fils_realm fils_dhcp
 
+	set_default dynamic_ownip 1
+
 	# legacy compatibility
 	[ -n "$auth_server" ] || json_get_var auth_server server
 	[ -n "$auth_port" ] || json_get_var auth_port port
@@ -605,7 +607,12 @@ append_radius_server() {
 	}
 	json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
 
-	[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
+	if [ -n "$ownip" ]; then
+		append bss_conf "own_ip_addr=$ownip" "$N"
+	elif [ "$dynamic_ownip" -gt 0 ]; then
+		append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+	fi
+
 	[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 	[ "$macfilter" = radius ] && append bss_conf "macaddr_acl=2" "$N"
 }
@@ -698,7 +705,9 @@ hostapd_set_bss_options() {
 		[ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
 	}
 
-	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
+	set_default nasid "${macaddr//\:}"
+	append bss_conf "nas_identifier=$nasid" "$N"
+
 	[ -n "$acct_server" ] && {
 		append bss_conf "acct_server_addr=$acct_server" "$N"
 		append bss_conf "acct_server_port=$acct_port" "$N"
@@ -916,7 +925,6 @@ hostapd_set_bss_options() {
 			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
 			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
 			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
-			[ -n "$nasid" ] || append bss_conf "nas_identifier=${macaddr//\:}" "$N"
 
 			if [ "$skip_kh_setup" -eq "0" ]; then
 				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push

feeds/wifi-ax/hostapd/patches/760-dynamic_own_ip.patch

@@ -0,0 +1,109 @@
+--- a/src/ap/ap_config.h
++++ b/src/ap/ap_config.h
+@@ -311,6 +311,7 @@ struct hostapd_bss_config {
+ 	unsigned int eap_sim_db_timeout;
+ 	int eap_server_erp; /* Whether ERP is enabled on internal EAP server */
+ 	struct hostapd_ip_addr own_ip_addr;
++	int dynamic_own_ip_addr;
+ 	char *nas_identifier;
+ 	struct hostapd_radius_servers *radius;
+ 	int acct_interim_interval;
+--- a/src/radius/radius_client.c
++++ b/src/radius/radius_client.c
+@@ -163,6 +163,8 @@ struct radius_client_data {
+ 	 */
+ 	void *ctx;
+ 
++	struct hostapd_ip_addr local_ip;
++
+ 	/**
+ 	 * conf - RADIUS client configuration (list of RADIUS servers to use)
+ 	 */
+@@ -720,6 +722,30 @@ static void radius_client_list_add(struc
+ 
+ 
+ /**
++ * radius_client_send - Get local address for the RADIUS auth socket
++ * @radius: RADIUS client context from radius_client_init()
++ * @addr: pointer to store the address
++ *
++ * This function returns the local address for the connection to the RADIUS
++ * auth server. It also opens the socket if it's not available yet.
++ */
++int radius_client_get_local_addr(struct radius_client_data *radius,
++				 struct hostapd_ip_addr *addr)
++{
++	struct hostapd_radius_servers *conf = radius->conf;
++
++	if (conf->auth_server && radius->auth_sock < 0)
++		radius_client_init_auth(radius);
++
++	if (radius->auth_sock < 0)
++		return -1;
++
++	memcpy(addr, &radius->local_ip, sizeof(*addr));
++
++	return 0;
++}
++
++/**
+  * radius_client_send - Send a RADIUS request
+  * @radius: RADIUS client context from radius_client_init()
+  * @msg: RADIUS message to be sent
+@@ -1238,6 +1264,10 @@ radius_change_server(struct radius_clien
+ 			wpa_printf(MSG_DEBUG, "RADIUS local address: %s:%u",
+ 				   inet_ntoa(claddr.sin_addr),
+ 				   ntohs(claddr.sin_port));
++			if (auth) {
++				radius->local_ip.af = AF_INET;
++				radius->local_ip.u.v4 = claddr.sin_addr;
++			}
+ 		}
+ 		break;
+ #ifdef CONFIG_IPV6
+@@ -1249,6 +1279,10 @@ radius_change_server(struct radius_clien
+ 				   inet_ntop(AF_INET6, &claddr6.sin6_addr,
+ 					     abuf, sizeof(abuf)),
+ 				   ntohs(claddr6.sin6_port));
++			if (auth) {
++				radius->local_ip.af = AF_INET6;
++				radius->local_ip.u.v6 = claddr6.sin6_addr;
++			}
+ 		}
+ 		break;
+ 	}
+--- a/src/radius/radius_client.h
++++ b/src/radius/radius_client.h
+@@ -249,6 +249,8 @@ int radius_client_register(struct radius
+ void radius_client_set_interim_error_cb(struct radius_client_data *radius,
+ 					void (*cb)(const u8 *addr, void *ctx),
+ 					void *ctx);
++int radius_client_get_local_addr(struct radius_client_data *radius,
++				 struct hostapd_ip_addr * addr);
+ int radius_client_send(struct radius_client_data *radius,
+ 		       struct radius_msg *msg,
+ 		       RadiusType msg_type, const u8 *addr);
+--- a/src/ap/ieee802_1x.c
++++ b/src/ap/ieee802_1x.c
+@@ -535,6 +535,10 @@ int add_common_radius_attr(struct hostap
+ 	struct hostapd_radius_attr *attr;
+ 	int len;
+ 
++	if (hapd->conf->dynamic_own_ip_addr)
++		radius_client_get_local_addr(hapd->radius,
++					     &hapd->conf->own_ip_addr);
++
+ 	if (!hostapd_config_get_radius_attr(req_attr,
+ 					    RADIUS_ATTR_NAS_IP_ADDRESS) &&
+ 	    hapd->conf->own_ip_addr.af == AF_INET &&
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -2681,6 +2681,8 @@ static int hostapd_config_fill(struct ho
+ 	} else if (os_strcmp(buf, "iapp_interface") == 0) {
+ 		wpa_printf(MSG_INFO, "DEPRECATED: iapp_interface not used");
+ #endif /* CONFIG_IAPP */
++	} else if (os_strcmp(buf, "dynamic_own_ip_addr") == 0) {
++		bss->dynamic_own_ip_addr = atoi(pos);
+ 	} else if (os_strcmp(buf, "own_ip_addr") == 0) {
+ 		if (hostapd_parse_ip_addr(pos, &bss->own_ip_addr)) {
+ 			wpa_printf(MSG_ERROR,

feeds/wifi-ax/hostapd/patches/900-coa_multi.patch

@@ -1,76 +1,298 @@
-Index: hostapd-2021-02-20-59e9794c/src/ap/hostapd.c
+--- a/src/radius/radius_das.h
-===================================================================
++++ b/src/radius/radius_das.h
---- hostapd-2021-02-20-59e9794c.orig/src/ap/hostapd.c
+@@ -44,6 +44,7 @@ struct radius_das_attrs {
-+++ hostapd-2021-02-20-59e9794c/src/ap/hostapd.c
+ struct radius_das_conf {
-@@ -862,7 +862,6 @@ static int hostapd_das_nas_mismatch(stru
+ 	int port;
- 	return 0;
+ 	const u8 *shared_secret;
- }
++	const u8 *nas_identifier;
- 
+ 	size_t shared_secret_len;
--
+ 	const struct hostapd_ip_addr *client_addr;
- static struct sta_info * hostapd_das_find_sta(struct hostapd_data *hapd,
+ 	unsigned int time_window;
- 					      struct radius_das_attrs *attr,
+--- a/src/ap/hostapd.c
- 					      int *multi)
++++ b/src/ap/hostapd.c
-@@ -1050,6 +1049,24 @@ static int hostapd_das_disconnect_pmksa(
+@@ -1367,6 +1367,7 @@ static int hostapd_setup_bss(struct host
- }
+ 		struct radius_das_conf das_conf;
+ 		os_memset(&das_conf, 0, sizeof(das_conf));
+ 		das_conf.port = conf->radius_das_port;
++		das_conf.nas_identifier = conf->nas_identifier;
+ 		das_conf.shared_secret = conf->radius_das_shared_secret;
+ 		das_conf.shared_secret_len =
+ 			conf->radius_das_shared_secret_len;
+--- a/src/radius/radius_das.c
++++ b/src/radius/radius_das.c
+@@ -12,13 +12,26 @@
+ #include "utils/common.h"
+ #include "utils/eloop.h"
+ #include "utils/ip_addr.h"
++#include "utils/list.h"
+ #include "radius.h"
+ #include "radius_das.h"
  
  
-+static struct hostapd_data * ap_get_hapd(struct hostapd_data *hapd, struct radius_das_attrs *attr)
+-struct radius_das_data {
-+{
++static struct dl_list das_ports = DL_LIST_HEAD_INIT(das_ports);
-+	size_t i;
-+	int multi;
 +
-+	for (i = 0; i < hapd->iface->num_bss; i++) {
++struct radius_das_port {
-+		if (!hapd->iface->bss[i]->iface->bss[i]->radius_das)
++	struct dl_list list;
-+			continue;
++	struct dl_list das_data;
-+		if (hapd->conf->radius_das_port !=hapd->iface->bss[i]->iface->bss[i]->conf->radius_das_port)
++
-+			continue;
++	int port;
-+		if (hostapd_das_find_sta(hapd, attr, &multi))
+ 	int sock;
-+			return hapd->iface->bss[i];
++};
++
++struct radius_das_data {
++	struct dl_list list;
++	struct radius_das_port *port;
+ 	u8 *shared_secret;
++	u8 *nas_identifier;
+ 	size_t shared_secret_len;
+ 	struct hostapd_ip_addr client_addr;
+ 	unsigned int time_window;
+@@ -378,56 +391,17 @@ fail:
+ }
+ 
+ 
+-static void radius_das_receive(int sock, void *eloop_ctx, void *sock_ctx)
++static void
++radius_das_receive_msg(struct radius_das_data *das, struct radius_msg *msg,
++		       struct sockaddr *from, socklen_t fromlen,
++		       char *abuf, int from_port)
+ {
+-	struct radius_das_data *das = eloop_ctx;
+-	u8 buf[1500];
+-	union {
+-		struct sockaddr_storage ss;
+-		struct sockaddr_in sin;
+-#ifdef CONFIG_IPV6
+-		struct sockaddr_in6 sin6;
+-#endif /* CONFIG_IPV6 */
+-	} from;
+-	char abuf[50];
+-	int from_port = 0;
+-	socklen_t fromlen;
+-	int len;
+-	struct radius_msg *msg, *reply = NULL;
++	struct radius_msg *reply = NULL;
+ 	struct radius_hdr *hdr;
+ 	struct wpabuf *rbuf;
++	struct os_time now;
+ 	u32 val;
+ 	int res;
+-	struct os_time now;
+-
+-	fromlen = sizeof(from);
+-	len = recvfrom(sock, buf, sizeof(buf), 0,
+-		       (struct sockaddr *) &from.ss, &fromlen);
+-	if (len < 0) {
+-		wpa_printf(MSG_ERROR, "DAS: recvfrom: %s", strerror(errno));
+-		return;
+-	}
+-
+-	os_strlcpy(abuf, inet_ntoa(from.sin.sin_addr), sizeof(abuf));
+-	from_port = ntohs(from.sin.sin_port);
+-
+-	wpa_printf(MSG_DEBUG, "DAS: Received %d bytes from %s:%d",
+-		   len, abuf, from_port);
+-	if (das->client_addr.u.v4.s_addr &&
+-	    das->client_addr.u.v4.s_addr != from.sin.sin_addr.s_addr) {
+-		wpa_printf(MSG_DEBUG, "DAS: Drop message from unknown client");
+-		return;
+-	}
+-
+-	msg = radius_msg_parse(buf, len);
+-	if (msg == NULL) {
+-		wpa_printf(MSG_DEBUG, "DAS: Parsing incoming RADIUS packet "
+-			   "from %s:%d failed", abuf, from_port);
+-		return;
+-	}
+-
+-	if (wpa_debug_level <= MSG_MSGDUMP)
+-		radius_msg_dump(msg);
+ 
+ 	if (radius_msg_verify_das_req(msg, das->shared_secret,
+ 				       das->shared_secret_len,
+@@ -494,9 +468,8 @@ static void radius_das_receive(int sock,
+ 			radius_msg_dump(reply);
+ 
+ 		rbuf = radius_msg_get_buf(reply);
+-		res = sendto(das->sock, wpabuf_head(rbuf),
+-			     wpabuf_len(rbuf), 0,
+-			     (struct sockaddr *) &from.ss, fromlen);
++		res = sendto(das->port->sock, wpabuf_head(rbuf),
++			     wpabuf_len(rbuf), 0, from, fromlen);
+ 		if (res < 0) {
+ 			wpa_printf(MSG_ERROR, "DAS: sendto(to %s:%d): %s",
+ 				   abuf, from_port, strerror(errno));
+@@ -508,6 +481,72 @@ fail:
+ 	radius_msg_free(reply);
+ }
+ 
++static void radius_das_receive(int sock, void *eloop_ctx, void *sock_ctx)
++{
++	struct radius_das_port *p = eloop_ctx;
++	struct radius_das_data *das;
++	u8 buf[1500];
++	union {
++		struct sockaddr_storage ss;
++		struct sockaddr_in sin;
++#ifdef CONFIG_IPV6
++		struct sockaddr_in6 sin6;
++#endif /* CONFIG_IPV6 */
++	} from;
++	struct radius_msg *msg;
++	size_t nasid_len = 0;
++	u8 *nasid_buf = NULL;
++	char abuf[50];
++	int from_port = 0;
++	socklen_t fromlen;
++	int found = 0;
++	int len;
++
++	fromlen = sizeof(from);
++	len = recvfrom(sock, buf, sizeof(buf), 0,
++		       (struct sockaddr *) &from.ss, &fromlen);
++	if (len < 0) {
++		wpa_printf(MSG_ERROR, "DAS: recvfrom: %s", strerror(errno));
++		return;
 +	}
-+	return hapd;
++
++	os_strlcpy(abuf, inet_ntoa(from.sin.sin_addr), sizeof(abuf));
++	from_port = ntohs(from.sin.sin_port);
++
++	msg = radius_msg_parse(buf, len);
++	if (msg == NULL) {
++		wpa_printf(MSG_DEBUG, "DAS: Parsing incoming RADIUS packet "
++			   "from %s:%d failed", abuf, from_port);
++		return;
++	}
++
++	wpa_printf(MSG_DEBUG, "DAS: Received %d bytes from %s:%d",
++		   len, abuf, from_port);
++
++	if (wpa_debug_level <= MSG_MSGDUMP)
++		radius_msg_dump(msg);
++
++	radius_msg_get_attr_ptr(msg, RADIUS_ATTR_NAS_IDENTIFIER,
++				&nasid_buf, &nasid_len, NULL);
++	dl_list_for_each(das, &p->das_data, struct radius_das_data, list) {
++		if (das->client_addr.u.v4.s_addr &&
++		    das->client_addr.u.v4.s_addr != from.sin.sin_addr.s_addr)
++			continue;
++
++		if (das->nas_identifier && nasid_buf &&
++		    (nasid_len != os_strlen(das->nas_identifier) ||
++		     os_memcmp(das->nas_identifier, nasid_buf, nasid_len) != 0))
++			continue;
++
++		found = 1;
++		radius_das_receive_msg(das, msg, (struct sockaddr *)&from.ss,
++				       fromlen, abuf, from_port);
++	}
++
++	if (!found)
++		wpa_printf(MSG_DEBUG, "DAS: Drop message from unknown client");
 +}
 +
-+
+ 
-+
+ static int radius_das_open_socket(int port)
- static enum radius_das_res
- hostapd_das_disconnect(void *ctx, struct radius_das_attrs *attr)
  {
-@@ -1057,6 +1074,10 @@ hostapd_das_disconnect(void *ctx, struct
+@@ -533,6 +572,49 @@ static int radius_das_open_socket(int po
- 	struct sta_info *sta;
+ }
- 	int multi;
  
-+	hapd = ap_get_hapd(hapd, attr);
+ 
-+	if (!hapd)
++static struct radius_das_port *
-+		return RADIUS_DAS_SESSION_NOT_FOUND;
++radius_das_open_port(int port)
++{
++	struct radius_das_port *p;
 +
- 	if (hostapd_das_nas_mismatch(hapd, attr))
++	dl_list_for_each(p, &das_ports, struct radius_das_port, list) {
- 		return RADIUS_DAS_NAS_MISMATCH;
++		if (p->port == port)
- 
++			return p;
-@@ -1096,6 +1117,10 @@ hostapd_das_coa(void *ctx, struct radius
++	}
- 	struct sta_info *sta;
- 	int multi;
- 
-+	hapd = ap_get_hapd(hapd, attr);
-+	if (!hapd)
-+		return RADIUS_DAS_SESSION_NOT_FOUND;
 +
- 	if (hostapd_das_nas_mismatch(hapd, attr))
++	p = os_zalloc(sizeof(*p));
- 		return RADIUS_DAS_NAS_MISMATCH;
++	if (p == NULL)
++		return NULL;
++
++	dl_list_init(&p->das_data);
++	p->port = port;
++	p->sock = radius_das_open_socket(port);
++	if (p->sock < 0)
++		goto free_port;
++
++	if (eloop_register_read_sock(p->sock, radius_das_receive, p, NULL))
++		goto close_port;
++
++	dl_list_add(&das_ports, &p->list);
++
++	return p;
++
++close_port:
++	close(p->sock);
++free_port:
++	os_free(p);
++
++	return NULL;
++}
++
++static void radius_das_close_port(struct radius_das_port *p)
++{
++	dl_list_del(&p->list);
++	eloop_unregister_read_sock(p->sock);
++	close(p->sock);
++	free(p);
++}
++
+ struct radius_das_data *
+ radius_das_init(struct radius_das_conf *conf)
+ {
+@@ -553,6 +635,8 @@ radius_das_init(struct radius_das_conf *
+ 	das->ctx = conf->ctx;
+ 	das->disconnect = conf->disconnect;
+ 	das->coa = conf->coa;
++	if (conf->nas_identifier)
++		das->nas_identifier = os_strdup(conf->nas_identifier);
  
-Index: hostapd-2021-02-20-59e9794c/src/radius/radius_das.c
+ 	os_memcpy(&das->client_addr, conf->client_addr,
-===================================================================
+ 		  sizeof(das->client_addr));
---- hostapd-2021-02-20-59e9794c.orig/src/radius/radius_das.c
+@@ -565,19 +649,15 @@ radius_das_init(struct radius_das_conf *
-+++ hostapd-2021-02-20-59e9794c/src/radius/radius_das.c
+ 	}
-@@ -568,10 +568,9 @@ radius_das_init(struct radius_das_conf *
+ 	das->shared_secret_len = conf->shared_secret_len;
  
- 	das->sock = radius_das_open_socket(conf->port);
+-	das->sock = radius_das_open_socket(conf->port);
- 	if (das->sock < 0) {
+-	if (das->sock < 0) {
--		wpa_printf(MSG_ERROR, "Failed to open UDP socket for RADIUS "
++	das->port = radius_das_open_port(conf->port);
-+		wpa_printf(MSG_ERROR, "Failed to open UDP socket for RADIUS - reusing existing port "
++	if (!das->port) {
+ 		wpa_printf(MSG_ERROR, "Failed to open UDP socket for RADIUS "
  			   "DAS");
--		radius_das_deinit(das);
+ 		radius_das_deinit(das);
--		return NULL;
+ 		return NULL;
-+		return das;
  	}
  
- 	if (eloop_register_read_sock(das->sock, radius_das_receive, das, NULL))
+-	if (eloop_register_read_sock(das->sock, radius_das_receive, das, NULL))
+-	{
+-		radius_das_deinit(das);
+-		return NULL;
+-	}
++	dl_list_add(&das->port->das_data, &das->list);
+ 
+ 	return das;
+ }
+@@ -588,11 +668,14 @@ void radius_das_deinit(struct radius_das
+ 	if (das == NULL)
+ 		return;
+ 
+-	if (das->sock >= 0) {
+-		eloop_unregister_read_sock(das->sock);
+-		close(das->sock);
++	if (das->port) {
++		dl_list_del(&das->list);
++
++		if (dl_list_empty(&das->port->das_data))
++			radius_das_close_port(das->port);
+ 	}
+ 
++	os_free(das->nas_identifier);
+ 	os_free(das->shared_secret);
+ 	os_free(das);
+ }

feeds/wifi-ax/mac80211/patches/pending/203-ath11k-mac.patch

@@ -2,11 +2,22 @@ Index: backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/q
 ===================================================================
 --- backports-20210222_001-4.4.60-b157d2276.orig/drivers/net/wireless/ath/ath11k/qmi.c
 +++ backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/qmi.c
-@@ -3161,6 +3161,12 @@ out_req:
+@@ -3161,6 +3161,23 @@ out_req:
  	return ret;
  }
  
 +static const struct firmware *fw_macs;
++static int fw_macs_num = 0;
++
++int ath11k_get_custom_macs_num(int num)
++{
++	int ret = fw_macs_num;
++
++	fw_macs_num += num;
++
++	return ret;
++}
++
 +const struct firmware* ath11k_get_custom_macs(void)
 +{
 +	return fw_macs;
@@ -15,7 +26,7 @@ Index: backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/q
  static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab)
  {
  	char filename[ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE];
-@@ -3188,6 +3194,8 @@ static int ath11k_qmi_load_bdf_qmi(struc
+@@ -3188,6 +3205,8 @@ static int ath11k_qmi_load_bdf_qmi(struc
  		goto out;
  	}
  
@@ -36,11 +47,12 @@ Index: backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/w
  
  struct wmi_tlv_policy {
  	size_t min_len;
-@@ -7278,11 +7279,14 @@ mem_free:
+@@ -7268,11 +7269,15 @@ mem_free:
  	return ret;
  }
  
 +const struct firmware* ath11k_get_custom_macs(void);
++int ath11k_get_custom_macs_num(int num);
 +
  static int ath11k_wmi_tlv_rdy_parse(struct ath11k_base *ab, u16 tag, u16 len,
  				    const void *ptr, void *data)
@@ -51,17 +63,18 @@ Index: backports-20210222_001-4.4.60-b157d2276/drivers/net/wireless/ath/ath11k/w
  	struct wmi_mac_addr *addr_list;
  	struct ath11k_pdev *pdev;
  	u32 num_mac_addr;
-@@ -7307,6 +7311,19 @@ static int ath11k_wmi_tlv_rdy_parse(stru
+@@ -7297,6 +7302,20 @@ static int ath11k_wmi_tlv_rdy_parse(stru
  		addr_list = (struct wmi_mac_addr *)ptr;
  		num_mac_addr = rdy_parse->num_extra_mac_addr;
  
 +		fw_entry = ath11k_get_custom_macs();
 +		if (fw_entry) {
++			int num = ath11k_get_custom_macs_num(ab->num_radios);
 +			printk("applying ath11k-macs\n");
-+			if (fw_entry->size >= (ab->num_radios * 6)) {
++			if (fw_entry->size >= ((num + ab->num_radios) * 6)) {
 +				for (i = 0; i < ab->num_radios; i++) {
 +					pdev = &ab->pdevs[i];
-+		                        ether_addr_copy(pdev->mac_addr, &fw_entry->data[i * 6]);
++		                        ether_addr_copy(pdev->mac_addr, &fw_entry->data[(num + i) * 6]);
 +				}
 +			}
 +			ab->pdevs_macaddr_valid = true;

patches/ipq807x/0004-ipq807x-add-the-Qualcomm-AX-target-support.patch

@@ -1,16 +1,16 @@
-From 1749748819caa03e249e8a5df1311498550cbd3b Mon Sep 17 00:00:00 2001
+From c931a11e400ddf501f6796c62ba512195a1561ce Mon Sep 17 00:00:00 2001
 From: John Crispin <john@phrozen.org>
 Date: Sat, 18 Jul 2020 08:53:44 +0200
-Subject: [PATCH 68/83] ipq807x: add the Qualcomm AX target support
+Subject: [PATCH] ipq807x: add the Qualcomm AX target support
 
 Signed-off-by: John Crispin <john@phrozen.org>
 ---
  config/Config-kernel.in                   |  9 ++++++
  include/image.mk                          |  6 +++-
  include/kernel-version.mk                 |  2 +-
+ package/boot/uboot-envtools/Makefile      |  5 ---
  package/boot/uboot-envtools/files/ipq807x | 37 +++++++++++++++++++++++
- toolchain/kernel-headers/Makefile         |  8 +++++
+ 5 files changed, 52 insertions(+), 7 deletions(-)
- 5 files changed, 60 insertions(+), 2 deletions(-)
  create mode 100644 package/boot/uboot-envtools/files/ipq807x
 
 diff --git a/config/Config-kernel.in b/config/Config-kernel.in
@@ -70,13 +70,29 @@ index c7aba61cd7..efecf2f919 100644
  LINUX_KERNEL_HASH-4.14.193 = 0b0fb41d4430e1a42738b341cbfd2f41951aa5cd02acabbd53f076119c8b9f03
  LINUX_KERNEL_HASH-5.4.158 = 6e018fecdc8fc24553756e582d83b82d65b10a6b03ef36262a24911f839b8d59
  LINUX_KERNEL_HASH-5.10.27 = d99dc9662951299c53a0a8d8c8d0a72a16ff861d20e927c0f9b14f63282d69d9
+diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile
+index a9eccec0ce..0696c81bea 100644
+--- a/package/boot/uboot-envtools/Makefile
++++ b/package/boot/uboot-envtools/Makefile
+@@ -58,11 +58,6 @@ MAKE_FLAGS += \
+ 	no-dot-config-targets=envtools \
+ 	envtools
+ 
+-define Package/uboot-envtools/conffiles
+-/etc/config/ubootenv
+-/etc/fw_env.config
+-endef
+-
+ define Package/uboot-envtools/install
+ 	$(INSTALL_DIR) $(1)/usr/sbin
+ 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/env/fw_printenv $(1)/usr/sbin
 diff --git a/package/boot/uboot-envtools/files/ipq807x b/package/boot/uboot-envtools/files/ipq807x
 new file mode 100644
-index 0000000000..6c429f1852
+index 0000000000..84ed73f288
 --- /dev/null
 +++ b/package/boot/uboot-envtools/files/ipq807x
 @@ -0,0 +1,37 @@
-+[ -e /etc/config/ubootenv ] && exit 0
++[ -e /etc/config/ubootenv ] && rm /etc/config/ubootenv
 +
 +touch /etc/config/ubootenv
 +

patches/ramips/0017-ramips-add-support-for-YunCore-FAP640.patch

@@ -0,0 +1,301 @@
+From dbd1fbf93aa42f4bd69ec6af4c4741229f5d7005 Mon Sep 17 00:00:00 2001
+From: Volodymyr Puiul <volodymyr.puiul@gmail.com>
+Date: Thu, 8 Dec 2022 15:20:40 +0100
+Subject: [PATCH] ramips: add support for YunCore FAP640
+
+It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A.
+
+Specifications:
+- SoC: MT7621AT (880MHz, 2 Cores)
+- RAM: 128 MB
+- Flash: 16 MB SPI
+- Wi-Fi:
+    - MT7915DN + MT7905DAN: 2.4/5 GHz
+- Ethernet: 5x1GiE via MT7530, 1xWAN with POE and 4xLAN
+- UART: J4 (115200 baud)
+    - Pinout: [3V3] (TXD) (RXD) (GND)
+- Power: 802.11af/at PoE;
+
+- Bootloader: U-Boot
+- Buttons:
+    - Reset
+- LEDs:
+    - Status - RGB controlled by
+      - GPIO 14 LOW - green color
+      - GPIO 15 LOW- red color
+      - GPIO 16 LOW - blue color
+    - WAN - gren color, controlled by switch GPIO 12 LOW
+    - LAN1 - gren color, controlled by switch GPIO 9 HIGH
+    - LAN2 - gren color, controlled by switch GPIO 6 LOW
+    - LAN3 - gren color, controlled by switch GPIO 3 LOW
+    - LAN4 - gren color, controlled by switch GPIO 0 LOW
+
+Installation:
+OEM firmware is based on LEDE with custom UI and support standard sysupgrade
+variant of firmware. However it requires "*.ubin" extension for sysupgrade file.
+Always select "Factory reset" switch on upgrade to OpenWRT, otherwise
+router will not boot.
+
+MAC addresses with OEM firmware:
+vendor   source
+lan      factory 0x4 (label)
+5g       factory 0x4 (label)
+2g       label with flipped bits bit in 1-st byte and bits 5, 6, 7 in
+  4-th byte
+
+Example
+label:  44:xx:xx:b7:xx:xx
+lan:    44:xx:xx:b7:xx:xx
+2g      46:xx:xx:c7:xx:xx
+5g      44:xx:xx:b7:xx:xx
+
+Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
+---
+ .../ramips/dts/mt7621_yuncore_fap640.dts      | 198 ++++++++++++++++++
+ target/linux/ramips/image/mt7621.mk           |  10 +
+ .../etc/hotplug.d/ieee80211/10_fix_wifi_mac   |   5 +
+ 3 files changed, 213 insertions(+)
+ create mode 100644 target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+
+diff --git a/target/linux/ramips/dts/mt7621_yuncore_fap640.dts b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+new file mode 100644
+index 0000000000..b48546d825
+--- /dev/null
++++ b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
+@@ -0,0 +1,198 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include "mt7621.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++	compatible = "yuncore,fap640", "mediatek,mt7621-soc";
++	model = "YunCore FAP640";
++
++	aliases {
++		led-boot = &led_status_blue;
++		led-failsafe = &led_status_red;
++		led-running = &led_status_green;
++		led-upgrade = &led_status_red;
++		label-mac-device = &gmac0;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_green: status_green {
++			label = "green:status";
++			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_red: status_red {
++			label = "red:status";
++			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_blue: status_blue {
++			label = "blue:status";
++			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
++		};
++
++		wan {
++			label = "green:wan";
++			gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:04:link";
++		};
++
++		lan1 {
++			label = "green:lan1";
++			gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "mt7530-0:03:link";
++		};
++
++		lan2 {
++			label = "green:lan2";
++			gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:02:link";
++		};
++
++		lan3 {
++			label = "green:lan3";
++			gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:01:link";
++		};
++
++		lan4 {
++			label = "green:lan4";
++			gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mt7530-0:00:link";
++		};
++	};
++
++	watchdog {
++		compatible = "linux,wdt-gpio";
++		gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		hw_algo = "toggle";
++		hw_margin_ms = <200>;
++		always-running;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++};
++
++&spi0 {
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <80000000>;
++		m25p,fast-read;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "Bootloader";
++				reg = <0x0 0x30000>;
++				read-only;
++			};
++
++			partition@30000 {
++				label = "Config";
++				reg = <0x30000 0x10000>;
++				read-only;
++			};
++
++			/* range 0x40000 to 0x50000 is empty in vendor
++			 * firmware, so we do not use it either
++			 */
++
++			factory: partition@50000 {
++				label = "Factory";
++				reg = <0x50000 0x40000>;
++				read-only;
++			};
++
++			partition@90000 {
++				compatible = "denx,uimage";
++				label = "firmware";
++				reg = <0x90000 0xf60000>;
++			};
++
++			partition@ff0000 {
++				label = "certificates";
++				reg = <0xff0000 0x10000>;
++			};
++		};
++	};
++};
++
++&pcie {
++	status = "okay";
++};
++
++&pcie1 {
++	wifi@0,0 {
++		compatible = "mediatek,mt76";
++		reg = <0x0000 0 0 0 0>;
++		mediatek,mtd-eeprom = <&factory 0x0>;
++		mediatek,disable-radar-background;
++	};
++};
++
++&gmac0 {
++	mtd-mac-address = <&factory 0x4>;
++};
++
++&switch0 {
++	gpio-controller;
++	#gpio-cells = <2>;
++
++	ports {
++		port@0 {
++			status = "okay";
++			label = "lan4";
++		};
++
++		port@1 {
++			status = "okay";
++			label = "lan3";
++		};
++
++		port@2 {
++			status = "okay";
++			label = "lan2";
++		};
++
++		port@3 {
++			status = "okay";
++			label = "lan1";
++		};
++
++		port@4 {
++			status = "okay";
++			label = "wan";
++			mtd-mac-address = <&factory 0x4>;
++			mtd-mac-address-increment = <1>;
++		};
++	};
++};
++
++&state_default {
++	gpio {
++		groups = "jtag", "wdt";
++		function = "gpio";
++	};
++};
+diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
+index 9e1eed024b..a528a257d4 100644
+--- a/target/linux/ramips/image/mt7621.mk
++++ b/target/linux/ramips/image/mt7621.mk
+@@ -1637,6 +1637,16 @@ define Device/youku_yk-l2
+ endef
+ TARGET_DEVICES += youku_yk-l2
+ 
++define Device/yuncore_fap640
++  $(Device/dsa-migration)
++  $(Device/uimage-lzma-loader)
++  IMAGE_SIZE := 15808k
++  DEVICE_VENDOR := YunCore
++  DEVICE_MODEL := FAP640
++  DEVICE_PACKAGES := kmod-mt7915e
++endef
++TARGET_DEVICES += yuncore_fap640
++
+ define Device/zbtlink_zbt-we1326
+   $(Device/dsa-migration)
+   $(Device/uimage-lzma-loader)
+diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+index 157e706534..be7b226c32 100644
+--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
++++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+@@ -38,4 +38,9 @@ case "$board" in
+ 		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+ 		[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+ 		;;
++	yuncore,fap640)
++		hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
++		[ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
++		[ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
++		;;
+ esac
+-- 
+2.25.1
+

profiles/yuncore_fap640.yml

@@ -0,0 +1,8 @@
+---
+profile: yuncore_fap640
+target: ramips
+subtarget: mt7621
+description: Build image for the Yuncore FAP640
+image: bin/targets/ramips/mt7621/openwrt-ramips-mt7621-yuncore_fap640-squashfs-sysupgrade.bin
+include:
+  - ucentral-ap

profiles/yuncore_fap650.yml

@@ -0,0 +1,12 @@
+---
+profile: yuncore_fap650
+target: ipq807x
+subtarget: ipq60xx
+description: Build image for the YunCore FAP650
+image: bin/targets/ipq807x/ipq60xx/openwrt-ipq807x-yuncore_fap650-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x
+include:
+  - wifi-ax
+  - ucentral-ap