Merge pull request #552 from Telecominfraproject/main

Merging  captive portal fixes and strict-forwarding rename

.github/workflows/build-dev.yml

@@ -21,16 +21,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cig_wf660a', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap102', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'sercomm_ap72tip', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: ['actiontec_web7200', 'cig_wf186w', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101_6e', 'edgecore_oap101e', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
 
     steps:
     - uses: actions/checkout@v3
 
-    # Clean unnecessary files to save disk space
-    - name: clean unncessary files to save space
-      run: |
-        docker rmi `docker images -q`
-
     - name: Build image for ${{ matrix.target }}
       id: build
       run: |

.github/workflows/x64_vm-build-test.yml

@@ -29,7 +29,7 @@ jobs:
       run: |
         git config --global user.email "you@example.com"
         git config --global user.name "Your Name"
-        make -j TARGET=${{ matrix.target }}        make -j TARGET=${{ matrix.target }}
+        make -j TARGET=${{ matrix.target }}
 
     - name: Package and upload image for ${{ matrix.target }}
       id: package_and_upload_image

LICENSE

@@ -1,28 +0,0 @@
-BSD 3-Clause License
-
-Copyright (c) 2024, Telecom Infra Project
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

config.yml

@@ -1,7 +1,16 @@
 repo:  https://github.com/openwrt/openwrt.git
-branch: openwrt-23.05
-revision: e92cf0c46ffe3ac7fca936c18577bfb19eb4ce9e
+branch: openwrt-21.02
+revision: c67509efd7d0c43eb3f622f06c8a31aa28d22f6e
 output_dir: ./output
 
 patch_folders:
-  - patches
+  - patches/backports/
+  - patches/base
+  - patches/wifi
+  - patches/ath79
+  - patches/ramips
+  - patches/ipq40xx
+  - patches/ipq806x
+  - patches/ipq807x
+  - patches/rest
+  - patches/x86

feeds/bluetooth/nrf52840/files/etc/init.d/nrf52840

@@ -5,8 +5,7 @@ START=80
 boot() {
 	. /lib/functions/system.sh
 	case $(board_name) in
-	edgecore,eap102|\
-	edgecore,oap102)
+	edgecore,eap102)
 		echo 54 > /sys/class/gpio/export
 		echo out > /sys/class/gpio/gpio54/direction
 		echo 0 > /sys/class/gpio/gpio54/value

feeds/ipq40xx/ath10k-ct-firmware/Makefile

@@ -1,701 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ath10k-ct-firmware
-PKG_VERSION:=2020-10-07
-PKG_RELEASE:=2
-CTVER1=021
-CTVER2=021
-
-# From fw_lede.bash, or can do it manually as well.
-H988XFC=a4c3d1e2fb80f6b8b9738c7189795ab9505e6c09efc12ba5f08ee7f49e934239
-H988XFCH=93108bd0870652860cdb57749f5a12205ecb15bb1f129d916ad73b6f06406c82
-H9887FC=459692deb186a63ab8eeddb7ad5d54779266e68ca686e7c46062554db6dca12b
-H9887FCH=fd126a457d0927d0c8ea10d66ef5b67d5e1e0741f8692bb3016bb602d0af3098
-H9980FC=52300e9d128c3d506e0b133d7a7964df3115f9511f1b574ef2a0767972c063bd
-H9980FCH=9c20c3a44b701f8fef0fe02f156e382b36b717fb56c76d540f6eac2077ec189b
-H9980CH=55f27045e7cf87a6a5656a050771d6d7a6197153a0737288a702c0836d5c6572
-H9980FHQ=add509b2a15ba90869f403c2e4440dbb91bd7037188d8468249cf1263adfd44e
-H9984FC=e6354a1547a308b4b0fe4cbc29693848c234acedd9e7a483a1b4fb5f9bbf0dc0
-H9984FCH=6e19ecd0b001ffb594a8b033deb2007595b8c0402402789b7de55b208639ebec
-H9984CH=7b6fdf3d970f3eff7c34df476c934a9bebb4f289b7968067950d31b82c71bb07
-H9984FHQ=f6a5d5a3a7b2c9267dc31673a19ee3b5312a2f84f26123cb5e8c000428ed76d2
-H4019FC=cde992cb328680e81cf85e195554699bcceef065c0c696ce4ef90c3311ab11fb
-H4019FCH=818afeb1226389357dfde754d641f936fb82ebe78607f10e15efd5c952a54f48
-H4019CH=30ba10f0d82116c6617cb58c3df5cc81e5ed8f29dbc8f95c0ca9c5013ce4f702
-H4019FHQ=8e4161f7bed5bd56513ca5caab582a6eee64e9e14a69f4de67587563b7b4d735
-H9888FC=d24e66bdb2f1098a2e06ff20fe037e31937e1a483e87c68827830513b4233b5d
-H9888FCH=5891e1c184da433ecc12ca0176ca89a77f7bc2b675576698b69bc93d46b77042
-H9888CH=b94f46cdda6171e5f566b1cdd6aafd68ff1a4f7e8a27762b90eb5d4f03839d99
-H9888FHQ=3cc81f8707bf5ba63bc9ffc14578c77637cae0e15766ae146af02eefb9ab7bfd
-
-include $(INCLUDE_DIR)/package.mk
-
-ATH10K_FIRMWARE_REV:=d622d160e9f552ead68d9ae81b715422892dc2ef
-ATH10K_FIRMWARE_URL:=@GITHUB/kvalo/ath10k-firmware/$(ATH10K_FIRMWARE_REV)
-
-QCA9887_BOARD_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca9887-board.bin
-define Download/qca9887-board
-  FILE:=$(QCA9887_BOARD_FILE)
-  URL:=$(ATH10K_FIRMWARE_URL)/QCA9887/hw1.0
-  URL_FILE:=board.bin
-  HASH:=cf4df099f6ee05c181f55ce17297a1d32c61d725eb96246fd315ad5587c42426
-endef
-$(eval $(call Download,qca9887-board))
-
-QCA988X_BOARD_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca988x-board.bin
-define Download/qca988x-board
-  FILE:=$(QCA988X_BOARD_FILE)
-  URL:=$(ATH10K_FIRMWARE_URL)/QCA988X/hw2.0
-  URL_FILE:=board.bin
-  HASH:=5b5b380333c2dd3b6ce67f30e2f7008f4020bf594970d3b464fd8d4a80fcd880
-endef
-$(eval $(call Download,qca988x-board))
-
-QCA99X0_BOARD_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca99x0-board.bin
-define Download/qca99x0-board
-  FILE:=$(QCA99X0_BOARD_FILE)
-  URL:=$(ATH10K_FIRMWARE_URL)/QCA99X0/hw2.0
-  URL_FILE:=boardData_AR900B_CUS239_5G_v2_001.bin
-  HASH:=3bf7561ee373b369025dcd366d276d038a97d3397ccae41ce841d98a58b30aff
-endef
-$(eval $(call Download,qca99x0-board))
-
-QCA99X0_BOARD2_REV:=ddcec9efd245da9365c474f513a855a55f3ac7fe
-QCA99X0_BOARD2_FILE:=ath10k-firmware-$(QCA99X0_BOARD2_REV)-qca99x0-board-2.bin
-define Download/qca99x0-board2
-  FILE:=$(QCA99X0_BOARD2_FILE)
-  URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0
-  URL_FILE:=board-2.bin?id=$(QCA99X0_BOARD2_REV)
-  HASH:=03711ac21e60ef59d3815e235eb721c0c22851b5410299411085aa6f2af45401
-endef
-$(eval $(call Download,qca99x0-board2))
-
-QCA9984_BOARD2_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca9984-board-2.bin
-define Download/qca9984-board2
-  FILE:=$(QCA9984_BOARD2_FILE)
-  URL:=$(ATH10K_FIRMWARE_URL)/QCA9984/hw1.0
-  URL_FILE:=board-2.bin
-  HASH:=0d6d46cf0467185e3959ce3cb69e2415be6e48ab8a4bee3eb400edbe48cb9c25
-endef
-$(eval $(call Download,qca9984-board2))
-
-QCA4019_BOARD2_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca4019-board-2.bin
-define Download/qca4019-board2
-  FILE:=$(QCA4019_BOARD2_FILE)
-  URL:=$(ATH10K_FIRMWARE_URL)/QCA4019/hw1.0
-  URL_FILE:=board-2.bin
-  HASH:=94b66aa4ddbed5110a96364d3c7b4ebcb320e3ac4e8697660b277e76077bc338
-endef
-$(eval $(call Download,qca4019-board2))
-
-QCA9888_BOARD2_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca9888-board-2.bin
-define Download/qca9888-board2
-  FILE:=$(QCA9888_BOARD2_FILE)
-  URL:=$(ATH10K_FIRMWARE_URL)/QCA9888/hw2.0
-  URL_FILE:=board-2.bin
-  HASH:=5b871bb567f64525ca45adb88063211de472015d09e0f9aa3fa61ab71c8fdfd3
-endef
-$(eval $(call Download,qca9888-board2))
-
-CT_FIRMWARE_FILE = $(1)-$($(1)_FIRMWARE_FILE_CT)
-CT_FIRMWARE_FILE_FULL_HTT = $(1)-$($(1)_FIRMWARE_FILE_CT_FULL_HTT)
-CT_FIRMWARE_FILE_HTT = $(1)-$($(1)_FIRMWARE_FILE_CT_HTT)
-
-define Download/ct-firmware
-  URL:=https://www.candelatech.com/downloads/$(2)
-  FILE:=$(call CT_FIRMWARE_FILE,$(1))
-  URL_FILE:=$($(1)_FIRMWARE_FILE_CT)
-endef
-
-define Download/ct-firmware-full-htt
-  URL:=https://www.candelatech.com/downloads/$(2)
-  FILE:=$(call CT_FIRMWARE_FILE_FULL_HTT,$(1))
-  URL_FILE:=$($(1)_FIRMWARE_FILE_CT_FULL_HTT)
-endef
-
-define Download/ct-firmware-htt
-  URL:=https://www.candelatech.com/downloads/$(2)
-  FILE:=$(call CT_FIRMWARE_FILE_HTT,$(1))
-  URL_FILE:=$($(1)_FIRMWARE_FILE_CT_HTT)
-endef
-
-QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.$(CTVER1)
-define Download/ath10k-firmware-qca988x-ct
-  $(call Download/ct-firmware,QCA988X,)
-  HASH:=$(H988XFC)
-endef
-$(eval $(call Download,ath10k-firmware-qca988x-ct))
-
-QCA988X_FIRMWARE_FILE_CT_FULL_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.$(CTVER1)
-define Download/ath10k-firmware-qca988x-ct-full-htt
-  $(call Download/ct-firmware-full-htt,QCA988X,)
-  HASH:=$(H988XFCH)
-endef
-$(eval $(call Download,ath10k-firmware-qca988x-ct-full-htt))
-
-
-QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.$(CTVER1)
-define Download/ath10k-firmware-qca9887-ct
-  $(call Download/ct-firmware,QCA9887,ath10k-9887)
-  HASH:=$(H9887FC)
-endef
-$(eval $(call Download,ath10k-firmware-qca9887-ct))
-
-QCA9887_FIRMWARE_FILE_CT_FULL_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.$(CTVER1)
-define Download/ath10k-firmware-qca9887-ct-full-htt
-  $(call Download/ct-firmware-full-htt,QCA9887,ath10k-9887)
-  HASH:=$(H9887FCH)
-endef
-$(eval $(call Download,ath10k-firmware-qca9887-ct-full-htt))
-
-
-QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca99x0-ct
-  $(call Download/ct-firmware,QCA99X0,ath10k-10-4b)
-  HASH:=$(H9980FC)
-endef
-$(eval $(call Download,ath10k-firmware-qca99x0-ct))
-
-QCA99X0_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca99x0-ct-full-htt
-  $(call Download/ct-firmware-full-htt,QCA99X0,ath10k-10-4b)
-  HASH:=$(H9980FCH)
-endef
-$(eval $(call Download,ath10k-firmware-qca99x0-ct-full-htt))
-
-QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca99x0-ct-htt
-  $(call Download/ct-firmware-htt,QCA99X0,ath10k-10-4b)
-  HASH:=$(H9980CH)
-endef
-$(eval $(call Download,ath10k-firmware-qca99x0-ct-htt))
-
-
-QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca9984-ct
-  $(call Download/ct-firmware,QCA9984,ath10k-9984-10-4b)
-  HASH:=$(H9984FC)
-endef
-$(eval $(call Download,ath10k-firmware-qca9984-ct))
-
-QCA9984_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca9984-ct-full-htt
-  $(call Download/ct-firmware-full-htt,QCA9984,ath10k-9984-10-4b)
-  HASH:=$(H9984FCH)
-endef
-$(eval $(call Download,ath10k-firmware-qca9984-ct-full-htt))
-
-QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca9984-ct-htt
-  $(call Download/ct-firmware-htt,QCA9984,ath10k-9984-10-4b)
-  HASH:=$(H9984CH)
-endef
-$(eval $(call Download,ath10k-firmware-qca9984-ct-htt))
-
-
-QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca4019-ct
-  $(call Download/ct-firmware,QCA4019,ath10k-4019-10-4b)
-  HASH:=$(H4019FC)
-endef
-$(eval $(call Download,ath10k-firmware-qca4019-ct))
-
-QCA4019_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca4019-ct-full-htt
-  $(call Download/ct-firmware-full-htt,QCA4019,ath10k-4019-10-4b)
-  HASH:=$(H4019FCH)
-endef
-$(eval $(call Download,ath10k-firmware-qca4019-ct-full-htt))
-
-QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca4019-ct-htt
-  $(call Download/ct-firmware-htt,QCA4019,ath10k-4019-10-4b)
-  HASH:=$(H4019CH)
-endef
-$(eval $(call Download,ath10k-firmware-qca4019-ct-htt))
-
-
-QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca9888-ct
-  $(call Download/ct-firmware,QCA9888,ath10k-9888-10-4b)
-  HASH:=$(H9888FC)
-endef
-$(eval $(call Download,ath10k-firmware-qca9888-ct))
-
-QCA9888_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca9888-ct-full-htt
-  $(call Download/ct-firmware-full-htt,QCA9888,ath10k-9888-10-4b)
-  HASH:=$(H9888FCH)
-endef
-$(eval $(call Download,ath10k-firmware-qca9888-ct-full-htt))
-
-QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
-define Download/ath10k-firmware-qca9888-ct-htt
-  $(call Download/ct-firmware-htt,QCA9888,ath10k-9888-10-4b)
-  HASH:=$(H9888CH)
-endef
-$(eval $(call Download,ath10k-firmware-qca9888-ct-htt))
-
-
-define Package/ath10k-ct-firmware-default
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=https://www.candelatech.com/ath10k.php
-  DEPENDS:=
-endef
-
-define Package/ath10k-firmware-qca988x-ct
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.1 firmware for QCA988x devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca988x
-endef
-define Package/ath10k-firmware-qca988x-ct-full-htt
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.1 full-htt-mgt fw for QCA988x
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca988x
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-
-define Package/ath10k-firmware-qca9887-ct
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.1 firmware for QCA9887 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9887
-endef
-define Package/ath10k-firmware-qca9887-ct-full-htt
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.1 full-htt-mgt fw for QCA9887
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9887
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-
-define Package/ath10k-firmware-qca99x0-ct
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 firmware for QCA99x0 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca99x0
-endef
-define Package/ath10k-firmware-qca99x0-ct-full-htt
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 full-htt-mgt fw for QCA99x0
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca99x0
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-define Package/ath10k-firmware-qca99x0-ct-htt
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k CT 10.4 htt-mgt fw for QCA99x0
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca99x0
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-
-define Package/ath10k-firmware-qca9984-ct
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 firmware for QCA9984 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9984
-endef
-define Package/ath10k-firmware-qca9984-ct-full-htt
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 full-htt-mgt fw for QCA9984
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9984
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-define Package/ath10k-firmware-qca9984-ct-htt
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9984
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9984
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-
-define Package/ath10k-firmware-qca4019-ct
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 firmware for QCA4018/9
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca4019
-endef
-define Package/ath10k-firmware-qca4019-ct-full-htt
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 full-htt-mgt for QCA4018/9
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca4019
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-define Package/ath10k-firmware-qca4019-ct-htt
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k CT 10.4 htt-mgt for QCA4018/9
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca4019
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-
-define Package/ath10k-firmware-qca9888-ct
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 fw for QCA9886/8 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9888
-endef
-define Package/ath10k-firmware-qca9888-ct-full-htt
-$(Package/ath10k-ct-firmware-default)
-  TITLE:=ath10k CT 10.4 full-htt-mgt fw for QCA9886/8
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9888
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-define Package/ath10k-firmware-qca9888-ct-htt
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9886/8
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  PROVIDES:=ath10k-firmware-qca9888
-  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
-endef
-
-
-define Package/ath10k-firmware-qca9887-ct/description
-Alternative ath10k firmware for QCA9887 from Candela Technologies.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.1.php
-This firmware conflicts with the standard 9887 firmware, so select only
-one.
-endef
-define Package/ath10k-firmware-qca9887-ct-full-htt/description
-Alternative ath10k firmware for QCA9887 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and fixes .11r authentication.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.1.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-
-define Package/ath10k-firmware-qca988x-ct/description
-Alternative ath10k firmware for QCA988X from Candela Technologies.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.1.php
-This firmware will NOT be used unless the standard ath10k-firmware-qca988x
-is un-selected since the driver will try to load firmware-5.bin before
-firmware-2.bin
-endef
-define Package/ath10k-firmware-qca988x-ct-full-htt/description
-Alternative ath10k firmware for QCA988X from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and fixes .11r authentication.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.1.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-
-define Package/ath10k-firmware-qca99x0-ct/description
-Alternative ath10k firmware for QCA99x0 from Candela Technologies.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware conflicts with the standard 99x0 firmware, so select only
-one.
-endef
-define Package/ath10k-firmware-qca99x0-ct-full-htt/description
-Alternative ath10k firmware for QCA99x0 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-define Package/ath10k-firmware-qca99x0-ct-htt/description
-Alternative ath10k firmware for QCA99x0 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-This firmware lacks a lot of features that ath10k does not use, saving
-a lot of resources.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-
-define Package/ath10k-firmware-qca9984-ct/description
-Alternative ath10k firmware for QCA9984 from Candela Technologies.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware conflicts with the standard 9984 firmware, so select only
-one.
-endef
-define Package/ath10k-firmware-qca9984-ct-full-htt/description
-Alternative ath10k firmware for QCA9984 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-define Package/ath10k-firmware-qca9984-ct-htt/description
-Alternative ath10k firmware for QCA9984 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-This firmware lacks a lot of features that ath10k does not use, saving
-a lot of resources.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-
-define Package/ath10k-firmware-qca4019-ct/description
-Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
-Enables IBSS and other features.  Works with standard or ath10k-ct driver.
-See:  http://www.candelatech.com/ath10k-10.4.php
-endef
-define Package/ath10k-firmware-qca4019-ct-full-htt/description
-Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-Enables IBSS and other features.
-See:  http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-define Package/ath10k-firmware-qca4019-ct-htt/description
-Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-This firmware lacks a lot of features that ath10k does not use, saving
-a lot of resources.
-Enables IBSS and other features.
-See:  http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-
-define Package/ath10k-firmware-qca9888-ct/description
-Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware conflicts with the standard 9886 and 9888 firmware, so select only
-one.
-endef
-define Package/ath10k-firmware-qca9888-ct-full-htt/description
-Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-define Package/ath10k-firmware-qca9888-ct-htt/description
-Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
-Uses normal HTT TX data path for management frames, which improves
-stability in busy networks and may be required for .11r authentication.
-This firmware lacks a lot of features that ath10k does not use, saving
-a lot of resources.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.4.php
-This firmware selects and requires the ath10k-ct driver.
-endef
-
-
-define Build/Compile
-
-endef
-
-
-define Package/ath10k-firmware-qca9887-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9887_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
-endef
-define Package/ath10k-firmware-qca9887-ct-full-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA9887) \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/ct-firmware-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9887_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
-endef
-
-define Package/ath10k-firmware-qca988x-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA988X_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA988X) \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
-endef
-define Package/ath10k-firmware-qca988x-ct-full-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA988X_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA988X) \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/ct-firmware-2.bin
-endef
-
-define Package/ath10k-firmware-qca99x0-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA99X0) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
-endef
-define Package/ath10k-firmware-qca99x0-ct-full-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA99X0) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/ct-firmware-5.bin
-endef
-define Package/ath10k-firmware-qca99x0-ct-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA99X0) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/ct-firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca9984-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9984_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9984) \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
-endef
-define Package/ath10k-firmware-qca9984-ct-full-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9984_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA9984) \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/ct-firmware-5.bin
-endef
-define Package/ath10k-firmware-qca9984-ct-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9984_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9984) \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/ct-firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca4019-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA4019_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA4019) \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
-endef
-define Package/ath10k-firmware-qca4019-ct-full-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA4019_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA4019) \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
-endef
-define Package/ath10k-firmware-qca4019-ct-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA4019_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA4019) \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca9888-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
-	ln -s \
-		../../cal-pci-0000:01:00.0.bin \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9888_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9888) \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
-endef
-define Package/ath10k-firmware-qca9888-ct-full-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
-	ln -s \
-		../../cal-pci-0000:01:00.0.bin \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9888_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA9888) \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/ct-firmware-5.bin
-endef
-define Package/ath10k-firmware-qca9888-ct-htt/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
-	ln -s \
-		../../cal-pci-0000:01:00.0.bin \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9888_BOARD2_FILE) \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9888) \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/ct-firmware-5.bin
-endef
-
-
-$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct-full-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct-full-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct-full-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct-full-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-full-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct-full-htt))
-$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct-htt))

feeds/ipq40xx/ath10k-ct/Makefile

@@ -1,122 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ath10k-ct
-PKG_RELEASE=1
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=
-
-PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
-PKG_MIRROR_HASH:=37b4f00231cb0ae00f63da1c94ae53c940c76d047ce0fb081c08a35fffbfd2c0
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-05-22b
-PKG_SOURCE_VERSION:=54a9ac02f1139596ea4361ebbc3e444955d86cfd
-#PKG_MIRROR_HASH:=97cf22a4a57381c7eb7a9b8a8b1e347e9711ce51c89db971b4ab9a35af476ece
-
-# Build the 5.4 ath10k-ct driver version.  Other option is "-4.19".
-# Probably this should match as closely as
-# possible to whatever mac80211 backports version is being used.
-CT_KVER="-5.7"
-
-PKG_MAINTAINER:=Ben Greear <greearb@candelatech.com>
-PKG_BUILD_PARALLEL:=1
-PKG_EXTMOD_SUBDIRS:=ath10k$(CT_KVER)
-
-STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
-
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/ath10k-ct
-  SUBMENU:=Wireless Drivers
-  TITLE:=ath10k-ct driver optimized for CT ath10k firmware
-  DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT @PCI_SUPPORT +kmod-hwmon-core
-  FILES:=\
-	$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_pci.ko \
-	$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_core.ko
-  AUTOLOAD:=$(call AutoProbe,ath10k_pci)
-  PROVIDES:=kmod-ath10k
-  VARIANT:=regular
-endef
-
-define KernelPackage/ath10k-ct/config
-
-       config ATH10K-CT_LEDS
-               bool "Enable LED support"
-               default y
-               depends on PACKAGE_kmod-ath10k-ct || PACKAGE_kmod-ath10k-ct-smallbuffers
-endef
-
-define KernelPackage/ath10k-ct-smallbuffers
-$(call KernelPackage/ath10k-ct)
-  TITLE+= (small buffers for low-RAM devices)
-  VARIANT:=smallbuffers
-endef
-
-NOSTDINC_FLAGS = \
-	-I$(PKG_BUILD_DIR) \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport \
-	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
-	-I$(STAGING_DIR)/usr/include/mac80211 \
-	-include backport/autoconf.h \
-	-include backport/backport.h
-
-ifdef CONFIG_PACKAGE_MAC80211_MESH
-  NOSTDINC_FLAGS += -DCONFIG_MAC80211_MESH
-endif
-
-CT_MAKEDEFS += CONFIG_ATH10K=m CONFIG_ATH10K_PCI=m CONFIG_ATH10K_CE=y
-
-# This AHB logic is needed for IPQ4019 radios
-CT_MAKEDEFS += CONFIG_ATH10K_AHB=m
-NOSTDINC_FLAGS += -DCONFIG_ATH10K_AHB
-
-NOSTDINC_FLAGS += -DSTANDALONE_CT
-
-ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
-  CT_MAKEDEFS += CONFIG_ATH10K_DEBUGFS=y CONFIG_MAC80211_DEBUGFS=y
-  NOSTDINC_FLAGS += -DCONFIG_MAC80211_DEBUGFS
-  NOSTDINC_FLAGS += -DCONFIG_ATH10K_DEBUGFS
-endif
-
-ifdef CONFIG_PACKAGE_ATH_DEBUG
-  NOSTDINC_FLAGS += -DCONFIG_ATH10K_DEBUG
-endif
-
-ifdef CONFIG_PACKAGE_ATH_DFS
-  NOSTDINC_FLAGS += -DCONFIG_ATH10K_DFS_CERTIFIED
-endif
-
-ifdef CONFIG_PACKAGE_ATH_SPECTRAL
-  CT_MAKEDEFS += CONFIG_ATH10K_SPECTRAL=y
-  NOSTDINC_FLAGS += -DCONFIG_ATH10K_SPECTRAL
-endif
-
-ifeq ($(CONFIG_ATH10K-CT_LEDS),y)
-  CT_MAKEDEFS += CONFIG_ATH10K_LEDS=y
-  NOSTDINC_FLAGS += -DCONFIG_ATH10K_LEDS
-endif
-
-ifeq ($(BUILD_VARIANT),smallbuffers)
-  NOSTDINC_FLAGS += -DCONFIG_ATH10K_SMALLBUFFERS
-endif
-
-define Build/Configure
-	cp $(STAGING_DIR)/usr/include/mac80211/ath/*.h $(PKG_BUILD_DIR)
-endef
-
-ifneq ($(findstring c,$(OPENWRT_VERBOSE)),)
-  CT_MAKEDEFS += V=1
-endif
-
-define Build/Compile
-	+$(MAKE) $(CT_MAKEDEFS) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) \
-		M="$(PKG_BUILD_DIR)/ath10k$(CT_KVER)" \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		modules
-endef
-
-$(eval $(call KernelPackage,ath10k-ct))
-$(eval $(call KernelPackage,ath10k-ct-smallbuffers))

feeds/ipq40xx/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch

@@ -1,37 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 26 Feb 2019 08:06:35 +0100
-Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
-
-The rates from mac80211 have to be copied to the state of ath10k-ct or
-otherwise the ath10k_check_apply_special_rates function overwrites
-them again with some default values. This breaks for example the
-mcast_rate set for a wifi-iface.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/ath10k-5.4/mac.c
-+++ b/ath10k-5.4/mac.c
-@@ -6793,6 +6793,7 @@ static void ath10k_bss_info_changed(stru
- 			   "mac vdev %d mcast_rate %x\n",
- 			   arvif->vdev_id, rate);
- 
-+		arvif->mcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->mcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);
-@@ -6801,6 +6802,7 @@ static void ath10k_bss_info_changed(stru
- 				    "failed to set mcast rate on vdev %i: %d\n",
- 				    arvif->vdev_id,  ret);
- 
-+		arvif->bcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->bcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);
-@@ -6827,6 +6829,7 @@ static void ath10k_bss_info_changed(stru
- 			return;
- 		}
- 
-+		arvif->mgt_rate[def.chan->band] = hw_rate_code;
- 		vdev_param = ar->wmi.vdev_param->mgmt_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- 						hw_rate_code);

feeds/ipq40xx/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -1,598 +0,0 @@
-From: Sebastian Gottschall <s.gottschall@newmedia-net.de>
-
-Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
-chipsets with on chipset connected led's using WMI Firmware API.  The LED
-device will get available named as "ath10k-phyX" at sysfs and can be controlled
-with various triggers.  adds also debugfs interface for gpio control.
-
-This patch is specific for OpenWRt base, as is use old backported package
-with old wireless source. Support for QCA9984 is removed.
-Reworked to use ath10k-ct custom source
-
-
-Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
-Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
-[kvalo: major reorg and cleanup]
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
-
-v13:
-
-* only compile tested!
-
-* fix all checkpatch warnings
-
-* fix commit log
-
-* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio)
-
-* unsigned -> unsigned int
-
-* remove GPIOLIB code, that should be added in a separate patch
-
-* rename gpio.c to leds.c
-
-* add leds.h
-
-* rename some functions:
-
-  ath10k_attach_led() -> ath10k_leds_register()
-  ath10k_unregister_led() -> ath10k_leds_unregister()
-  ath10k_reset_led_pin() -> ath10k_leds_start()
-
-* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering
-
-* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c
-
-* rename struct ath10k_gpiocontrol as anonymous function under struct
-  ath10k::leds, no need for memory allocation
-
-* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller
-
-* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it
-
-* Kconfig help text improvement and move it lower in the menu, also don't enable it by default
-
-* switch to set_brightness_blocking() so that the callback can sleep,
-  then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex
-  to access ar->state
-
-* don't touch ath10k_wmi_pdev_get_temperature()
-
-* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface
-
-* remove debugfs interface, that should be added in another patch
-
-* cleanup includes
-
- ath10k-5.4/Kconfig   |  10 +++
- ath10k-5.4/Makefile  |   1 +
- ath10k-5.4/core.c    |  22 +++++++
- ath10k-5.4/core.h    |   9 ++-
- ath10k-5.4/hw.h      |   1 +
- ath10k-5.4/leds.c    | 103 ++++++++++++++++++++++++++++++
- ath10k-5.4/leds.h    |  45 +++++++++++++
- ath10k-5.4/mac.c     |   1 +
- ath10k-5.4/wmi-ops.h |  32 ++++++++++
- ath10k-5.4/wmi-tlv.c |   2 +
- ath10k-5.4/wmi.c     |  54 ++++++++++++++++
- ath10k-5.4/wmi.h     |  35 ++++++++++
- 12 files changed, 314 insertions(+), 1 deletion(-)
- create mode 100644 ath10k-5.4/leds.c
- create mode 100644 ath10k-5.4/leds.h
-
---- a/ath10k-5.4/Kconfig
-+++ b/ath10k-5.4/Kconfig
-@@ -66,6 +66,16 @@ config ATH10K_DEBUGFS
- 
- 	  If unsure, say Y to make it easier to debug problems.
- 
-+config ATH10K_LEDS
-+	bool "Atheros ath10k LED support"
-+	depends on ATH10K
-+	select MAC80211_LEDS
-+	select LEDS_CLASS
-+	select NEW_LEDS
-+	default y
-+	---help---
-+	  This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
-+
- config ATH10K_SPECTRAL
- 	bool "Atheros ath10k spectral scan support"
- 	depends on ATH10K_DEBUGFS
---- a/ath10k-5.4/Makefile
-+++ b/ath10k-5.4/Makefile
-@@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) +=
- ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
- ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
- ath10k_core-$(CONFIG_THERMAL) += thermal.o
-+ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o
- ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
- ath10k_core-$(CONFIG_PM) += wow.o
- ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
---- a/ath10k-5.4/core.c
-+++ b/ath10k-5.4/core.c
-@@ -25,6 +25,7 @@
- #include "testmode.h"
- #include "wmi-ops.h"
- #include "coredump.h"
-+#include "leds.h"
- 
- /* Disable ath10k-ct DBGLOG output by default */
- unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG;
-@@ -67,6 +68,7 @@ static const struct ath10k_hw_params ath
- 		.dev_id = QCA988X_2_0_DEVICE_ID,
- 		.bus = ATH10K_BUS_PCI,
- 		.name = "qca988x hw2.0",
-+		.led_pin = 1,
- 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
- 		.uart_pin = 7,
- 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -137,6 +139,7 @@ static const struct ath10k_hw_params ath
- 		.dev_id = QCA9887_1_0_DEVICE_ID,
- 		.bus = ATH10K_BUS_PCI,
- 		.name = "qca9887 hw1.0",
-+		.led_pin = 1,
- 		.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
- 		.uart_pin = 7,
- 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -344,6 +347,7 @@ static const struct ath10k_hw_params ath
- 		.dev_id = QCA99X0_2_0_DEVICE_ID,
- 		.bus = ATH10K_BUS_PCI,
- 		.name = "qca99x0 hw2.0",
-+		.led_pin = 17,
- 		.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
- 		.uart_pin = 7,
- 		.otp_exe_param = 0x00000700,
-@@ -385,6 +389,7 @@ static const struct ath10k_hw_params ath
- 		.dev_id = QCA9984_1_0_DEVICE_ID,
- 		.bus = ATH10K_BUS_PCI,
- 		.name = "qca9984/qca9994 hw1.0",
-+		.led_pin = 17,
- 		.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
- 		.uart_pin = 7,
- 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -433,6 +438,7 @@ static const struct ath10k_hw_params ath
- 		.dev_id = QCA9888_2_0_DEVICE_ID,
- 		.bus = ATH10K_BUS_PCI,
- 		.name = "qca9888 hw2.0",
-+		.led_pin = 17,
- 		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
- 		.uart_pin = 7,
- 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -3573,6 +3579,10 @@ int ath10k_core_start(struct ath10k *ar,
- 			ath10k_wmi_check_apply_board_power_ctl_table(ar);
- 	}
- 
-+	status = ath10k_leds_start(ar);
-+	if (status)
-+		goto err_hif_stop;
-+
- 	return 0;
- 
- err_hif_stop:
-@@ -3829,9 +3839,18 @@ static void ath10k_core_register_work(st
- 		goto err_spectral_destroy;
- 	}
- 
-+	status = ath10k_leds_register(ar);
-+	if (status) {
-+		ath10k_err(ar, "could not register leds: %d\n",
-+			   status);
-+		goto err_thermal_unregister;
-+	}
-+
- 	set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
- 	return;
- 
-+err_thermal_unregister:
-+	ath10k_thermal_unregister(ar);
- err_spectral_destroy:
- 	ath10k_spectral_destroy(ar);
- err_debug_destroy:
-@@ -3891,6 +3910,8 @@ void ath10k_core_unregister(struct ath10
- 	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
- 		return;
- 
-+	ath10k_leds_unregister(ar);
-+
- 	ath10k_thermal_unregister(ar);
- 	/* Stop spectral before unregistering from mac80211 to remove the
- 	 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
---- a/ath10k-5.4/core.h
-+++ b/ath10k-5.4/core.h
-@@ -14,6 +14,7 @@
- #include <linux/pci.h>
- #include <linux/uuid.h>
- #include <linux/time.h>
-+#include <linux/leds.h>
- 
- #include "htt.h"
- #include "htc.h"
-@@ -1469,6 +1470,13 @@ struct ath10k {
- 	} testmode;
- 
- 	struct {
-+		struct gpio_led wifi_led;
-+		struct led_classdev cdev;
-+		char label[48];
-+		u32 gpio_state_pin;
-+	} leds;
-+
-+	struct {
- 		/* protected by data_lock */
- 		u32 fw_crash_counter;
- 		u32 fw_warm_reset_counter;
---- a/ath10k-5.4/hw.h
-+++ b/ath10k-5.4/hw.h
-@@ -518,6 +518,7 @@ struct ath10k_hw_params {
- 	const char *name;
- 	u32 patch_load_addr;
- 	int uart_pin;
-+	int led_pin;
- 	u32 otp_exe_param;
- 
- 	/* Type of hw cycle counter wraparound logic, for more info
---- /dev/null
-+++ b/ath10k-5.4/leds.c
-@@ -0,0 +1,103 @@
-+/*
-+ * Copyright (c) 2005-2011 Atheros Communications Inc.
-+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
-+ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
-+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/leds.h>
-+
-+#include "core.h"
-+#include "wmi.h"
-+#include "wmi-ops.h"
-+
-+#include "leds.h"
-+
-+static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev,
-+					       enum led_brightness brightness)
-+{
-+	struct ath10k *ar = container_of(led_cdev, struct ath10k,
-+					 leds.cdev);
-+	struct gpio_led *led = &ar->leds.wifi_led;
-+
-+	mutex_lock(&ar->conf_mutex);
-+
-+	if (ar->state != ATH10K_STATE_ON)
-+		goto out;
-+
-+	ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
-+	ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin);
-+
-+out:
-+	mutex_unlock(&ar->conf_mutex);
-+
-+	return 0;
-+}
-+
-+int ath10k_leds_start(struct ath10k *ar)
-+{
-+	if (ar->hw_params.led_pin == 0)
-+		/* leds not supported */
-+		return 0;
-+
-+	/* under some circumstances, the gpio pin gets reconfigured
-+	 * to default state by the firmware, so we need to
-+	 * reconfigure it this behaviour has only ben seen on
-+	 * QCA9984 and QCA99XX devices so far
-+	 */
-+	ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0,
-+			       WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
-+	ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
-+
-+	return 0;
-+}
-+
-+int ath10k_leds_register(struct ath10k *ar)
-+{
-+	int ret;
-+
-+	if (ar->hw_params.led_pin == 0)
-+		/* leds not supported */
-+		return 0;
-+
-+	snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s",
-+		 wiphy_name(ar->hw->wiphy));
-+	ar->leds.wifi_led.active_low = 1;
-+	ar->leds.wifi_led.gpio = ar->hw_params.led_pin;
-+	ar->leds.wifi_led.name = ar->leds.label;
-+	ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
-+
-+	ar->leds.cdev.name = ar->leds.label;
-+	ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
-+
-+	/* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
-+	ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
-+
-+	ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+void ath10k_leds_unregister(struct ath10k *ar)
-+{
-+	if (ar->hw_params.led_pin == 0)
-+		/* leds not supported */
-+		return;
-+
-+	led_classdev_unregister(&ar->leds.cdev);
-+}
-+
---- /dev/null
-+++ b/ath10k-5.4/leds.h
-@@ -0,0 +1,41 @@
-+/*
-+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+#ifndef _LEDS_H_
-+#define _LEDS_H_
-+
-+#include "core.h"
-+
-+#ifdef CONFIG_ATH10K_LEDS
-+void ath10k_leds_unregister(struct ath10k *ar);
-+int ath10k_leds_start(struct ath10k *ar);
-+int ath10k_leds_register(struct ath10k *ar);
-+#else
-+static inline void ath10k_leds_unregister(struct ath10k *ar)
-+{
-+}
-+
-+static inline int ath10k_leds_start(struct ath10k *ar)
-+{
-+	return 0;
-+}
-+
-+static inline int ath10k_leds_register(struct ath10k *ar)
-+{
-+	return 0;
-+}
-+
-+#endif
-+#endif /* _LEDS_H_ */
---- a/ath10k-5.4/mac.c
-+++ b/ath10k-5.4/mac.c
-@@ -24,6 +24,7 @@
- #include "wmi-tlv.h"
- #include "wmi-ops.h"
- #include "wow.h"
-+#include "leds.h"
- 
- /*********/
- /* Rates */
---- a/ath10k-5.4/wmi-ops.h
-+++ b/ath10k-5.4/wmi-ops.h
-@@ -218,7 +218,10 @@ struct wmi_ops {
- 	struct sk_buff *(*gen_bb_timing)
- 			(struct ath10k *ar,
- 			 const struct wmi_bb_timing_cfg_arg *arg);
-+	struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
-+					   u32 input, u32 pull_type, u32 intr_mode);
- 
-+	struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
- };
- 
- int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
-@@ -1105,6 +1108,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
- 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
- }
- 
-+static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num,
-+					 u32 input, u32 pull_type, u32 intr_mode)
-+{
-+	struct sk_buff *skb;
-+
-+	if (!ar->wmi.ops->gen_gpio_config)
-+		return -EOPNOTSUPP;
-+
-+	skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
-+	if (IS_ERR(skb))
-+		return PTR_ERR(skb);
-+
-+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
-+}
-+
-+static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
-+{
-+	struct sk_buff *skb;
-+
-+	if (!ar->wmi.ops->gen_gpio_config)
-+		return -EOPNOTSUPP;
-+
-+	skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
-+	if (IS_ERR(skb))
-+		return PTR_ERR(skb);
-+
-+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
-+}
-+
- static inline int
- ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
- {
---- a/ath10k-5.4/wmi-tlv.c
-+++ b/ath10k-5.4/wmi-tlv.c
-@@ -4364,6 +4364,8 @@ static const struct wmi_ops wmi_tlv_ops
- 	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
- 	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
- 	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
-+	/* .gen_gpio_config not implemented */
-+	/* .gen_gpio_output not implemented */
- };
- 
- static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
---- a/ath10k-5.4/wmi.c
-+++ b/ath10k-5.4/wmi.c
-@@ -8295,6 +8295,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
- 	return skb;
- }
- 
-+static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar,
-+						     u32 gpio_num, u32 input,
-+						     u32 pull_type, u32 intr_mode)
-+{
-+	struct wmi_gpio_config_cmd *cmd;
-+	struct sk_buff *skb;
-+
-+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
-+	if (!skb)
-+		return ERR_PTR(-ENOMEM);
-+
-+	cmd = (struct wmi_gpio_config_cmd *)skb->data;
-+	cmd->pull_type = __cpu_to_le32(pull_type);
-+	cmd->gpio_num = __cpu_to_le32(gpio_num);
-+	cmd->input = __cpu_to_le32(input);
-+	cmd->intr_mode = __cpu_to_le32(intr_mode);
-+
-+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n",
-+		   gpio_num, input, pull_type, intr_mode);
-+
-+	return skb;
-+}
-+
-+static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar,
-+						     u32 gpio_num, u32 set)
-+{
-+	struct wmi_gpio_output_cmd *cmd;
-+	struct sk_buff *skb;
-+
-+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
-+	if (!skb)
-+		return ERR_PTR(-ENOMEM);
-+
-+	cmd = (struct wmi_gpio_output_cmd *)skb->data;
-+	cmd->gpio_num = __cpu_to_le32(gpio_num);
-+	cmd->set = __cpu_to_le32(set);
-+
-+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n",
-+		   gpio_num, set);
-+
-+	return skb;
-+}
-+
- static struct sk_buff *
- ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
- 			     enum wmi_sta_ps_mode psmode)
-@@ -10094,6 +10137,9 @@ static const struct wmi_ops wmi_ops = {
- 	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
- 	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
- 	.gen_echo = ath10k_wmi_op_gen_echo,
-+	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
-+
- 	/* .gen_bcn_tmpl not implemented */
- 	/* .gen_prb_tmpl not implemented */
- 	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -10164,6 +10210,8 @@ static const struct wmi_ops wmi_10_1_ops
- 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
- 	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
- 	.gen_echo = ath10k_wmi_op_gen_echo,
-+	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- 	/* .gen_bcn_tmpl not implemented */
- 	/* .gen_prb_tmpl not implemented */
- 	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -10243,6 +10291,8 @@ static const struct wmi_ops wmi_10_2_ops
- 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
- 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
- 	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
-+	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- 	/* .gen_pdev_enable_adaptive_cca not implemented */
- };
- 
-@@ -10314,6 +10364,8 @@ static const struct wmi_ops wmi_10_2_4_o
- 		ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
- 	.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
- 	.gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
-+	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- 	/* .gen_bcn_tmpl not implemented */
- 	/* .gen_prb_tmpl not implemented */
- 	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -10395,6 +10447,8 @@ static const struct wmi_ops wmi_10_4_ops
- 	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
- 	.gen_echo = ath10k_wmi_op_gen_echo,
- 	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
-+	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
-+	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
- };
- 
- int ath10k_wmi_attach(struct ath10k *ar)
---- a/ath10k-5.4/wmi.h
-+++ b/ath10k-5.4/wmi.h
-@@ -3110,6 +3110,41 @@ enum wmi_10_4_feature_mask {
- 
- };
- 
-+/* WMI_GPIO_CONFIG_CMDID */
-+enum {
-+	WMI_GPIO_PULL_NONE,
-+	WMI_GPIO_PULL_UP,
-+	WMI_GPIO_PULL_DOWN,
-+};
-+
-+enum {
-+	WMI_GPIO_INTTYPE_DISABLE,
-+	WMI_GPIO_INTTYPE_RISING_EDGE,
-+	WMI_GPIO_INTTYPE_FALLING_EDGE,
-+	WMI_GPIO_INTTYPE_BOTH_EDGE,
-+	WMI_GPIO_INTTYPE_LEVEL_LOW,
-+	WMI_GPIO_INTTYPE_LEVEL_HIGH
-+};
-+
-+/* WMI_GPIO_CONFIG_CMDID */
-+struct wmi_gpio_config_cmd {
-+	__le32 gpio_num;             /* GPIO number to be setup */
-+	__le32 input;                /* 0 - Output/ 1 - Input */
-+	__le32 pull_type;            /* Pull type defined above */
-+	__le32 intr_mode;            /* Interrupt mode defined above (Input) */
-+} __packed;
-+
-+/* WMI_GPIO_OUTPUT_CMDID */
-+struct wmi_gpio_output_cmd {
-+	__le32 gpio_num;    /* GPIO number to be setup */
-+	__le32 set;         /* Set the GPIO pin*/
-+} __packed;
-+
-+/* WMI_GPIO_INPUT_EVENTID */
-+struct wmi_gpio_input_event {
-+	__le32 gpio_num;    /* GPIO number which changed state */
-+} __packed;
-+
- struct wmi_ext_resource_config_10_4_cmd {
- 	/* contains enum wmi_host_platform_type */
- 	__le32 host_platform_config;

feeds/ipq40xx/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch

@@ -1,53 +0,0 @@
-From 79c9d7aabae1d1da9eea97d83b61e1517a8a2221 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Fri, 22 Jun 2018 18:59:44 +0200
-Subject: [PATCH] ath10k: use tpt LED trigger by default
-
-Use the tpt LED trigger for each created phy led. Ths way LEDs attached
-to the ath10k GPIO pins are indicating the phy status and blink on
-traffic.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- ath10k-5.4/core.h | 4 ++++
- ath10k-5.4/leds.c | 4 +---
- ath10k-5.4/mac.c  | 2 +-
- 3 files changed, 6 insertions(+), 4 deletions(-)
-
---- a/ath10k-5.4/core.h
-+++ b/ath10k-5.4/core.h
-@@ -1573,6 +1573,10 @@ struct ath10k {
- 	u8 csi_data[4096];
- 	u16 csi_data_len;
- 
-+#ifdef CPTCFG_MAC80211_LEDS
-+	const char *led_default_trigger;
-+#endif
-+
- 	/* must be last */
- 	u8 drv_priv[0] __aligned(sizeof(void *));
- };
---- a/ath10k-5.4/leds.c
-+++ b/ath10k-5.4/leds.c
-@@ -81,9 +81,7 @@ int ath10k_leds_register(struct ath10k *
- 
- 	ar->leds.cdev.name = ar->leds.label;
- 	ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
--
--	/* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
--	ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
-+	ar->leds.cdev.default_trigger = ar->led_default_trigger;
- 
- 	ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
- 	if (ret)
---- a/ath10k-5.4/mac.c
-+++ b/ath10k-5.4/mac.c
-@@ -10367,7 +10367,7 @@ int ath10k_mac_register(struct ath10k *a
- 	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
- 
- #ifdef CPTCFG_MAC80211_LEDS
--	ieee80211_create_tpt_led_trigger(ar->hw,
-+	ar->led_default_trigger = ieee80211_create_tpt_led_trigger(ar->hw,
- 		IEEE80211_TPT_LEDTRIG_FL_RADIO, ath10k_tpt_blink,
- 		ARRAY_SIZE(ath10k_tpt_blink));
- #endif

feeds/ipq40xx/ath10k-ct/patches/205-ath10k-Add-NL80211_EXT_FEATURE_AQL-flag.patch

@@ -1,10 +0,0 @@
---- a/ath10k-5.4/mac.c
-+++ b/ath10k-5.4/mac.c
-@@ -10180,6 +10180,7 @@ int ath10k_mac_register(struct ath10k *a
- 	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
- 	wiphy_ext_feature_set(ar->hw->wiphy,
- 			      NL80211_EXT_FEATURE_SET_SCAN_DWELL);
-+	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_AQL);
- 
- 	if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map) ||
- 	    test_bit(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, ar->wmi.svc_map))

feeds/ipq40xx/ath10k-ct/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch

@@ -1,14 +0,0 @@
---- a/ath10k-5.4/htt.h
-+++ b/ath10k-5.4/htt.h
-@@ -225,7 +225,11 @@ enum htt_rx_ring_flags {
- };
- 
- #define HTT_RX_RING_SIZE_MIN 128
-+#ifndef CONFIG_ATH10K_SMALLBUFFERS
- #define HTT_RX_RING_SIZE_MAX 2048
-+#else
-+#define HTT_RX_RING_SIZE_MAX 512
-+#endif
- #define HTT_RX_RING_SIZE HTT_RX_RING_SIZE_MAX
- #define HTT_RX_RING_FILL_LEVEL (((HTT_RX_RING_SIZE) / 2) - 1)
- #define HTT_RX_RING_FILL_LEVEL_DUAL_MAC (HTT_RX_RING_SIZE - 1)

feeds/ipq40xx/ath10k-ct/patches/960-0011-ath10k-limit-pci-buffer-size.patch

@@ -1,50 +0,0 @@
---- a/ath10k-5.4/pci.c
-+++ b/ath10k-5.4/pci.c
-@@ -131,7 +131,11 @@ static struct ce_attr host_ce_config_wla
- 		.flags = CE_ATTR_FLAGS,
- 		.src_nentries = 0,
- 		.src_sz_max = 2048,
-+#ifndef CONFIG_ATH10K_SMALLBUFFERS
- 		.dest_nentries = 512,
-+#else
-+		.dest_nentries = 128,
-+#endif
- 		.recv_cb = ath10k_pci_htt_htc_rx_cb,
- 	},
- 
-@@ -140,7 +144,11 @@ static struct ce_attr host_ce_config_wla
- 		.flags = CE_ATTR_FLAGS,
- 		.src_nentries = 0,
- 		.src_sz_max = 2048,
-+#ifndef CONFIG_ATH10K_SMALLBUFFERS
- 		.dest_nentries = 128,
-+#else
-+		.dest_nentries = 64,
-+#endif
- 		.recv_cb = ath10k_pci_htc_rx_cb,
- 	},
- 
-@@ -167,7 +175,11 @@ static struct ce_attr host_ce_config_wla
- 		.flags = CE_ATTR_FLAGS,
- 		.src_nentries = 0,
- 		.src_sz_max = 512,
-+#ifndef CONFIG_ATH10K_SMALLBUFFERS
- 		.dest_nentries = 512,
-+#else
-+		.dest_nentries = 128,
-+#endif
- 		.recv_cb = ath10k_pci_htt_rx_cb,
- 	},
- 
-@@ -192,7 +204,11 @@ static struct ce_attr host_ce_config_wla
- 		.flags = CE_ATTR_FLAGS,
- 		.src_nentries = 0,
- 		.src_sz_max = 2048,
-+#ifndef CONFIG_ATH10K_SMALLBUFFERS
- 		.dest_nentries = 128,
-+#else
-+		.dest_nentries = 96,
-+#endif
- 		.recv_cb = ath10k_pci_pktlog_rx_cb,
- 	},
- 

feeds/ipq40xx/ath10k-ct/patches/960-0012-ath10k-add_cmd_processing_time_for_scan_timeout.patch

@@ -1,22 +0,0 @@
-diff -Naur a/ath10k-5.7/mac.c b/ath10k-5.7/mac.c
---- a/ath10k-5.7/mac.c	2021-06-09 16:30:17.793556032 -0400
-+++ b/ath10k-5.7/mac.c	2021-06-09 17:38:08.587733979 -0400
-@@ -7103,13 +7103,15 @@
- 		scan_timeout = min_t(u32, arg.max_rest_time *
- 				(arg.n_channels - 1) + (req->duration +
- 				ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
--				arg.n_channels, arg.max_scan_time + 200);
-+				arg.n_channels, arg.max_scan_time);
- 
- 	} else {
--		/* Add a 200ms margin to account for event/command processing */
--		scan_timeout = arg.max_scan_time + 200;
-+		scan_timeout = arg.max_scan_time;
- 	}
- 
-+	/* Add a 200ms margin to account for event/command processing */
-+	scan_timeout += 200;
-+
- 	ret = ath10k_start_scan(ar, &arg);
- 	if (ret) {
- 		ath10k_warn(ar, "failed to start hw scan: %d\n", ret);

feeds/ipq40xx/ath10k-ct/patches/970-accumulate-survey-info-data

@@ -1,11 +0,0 @@
---- a/ath10k-5.7/mac.c	2021-07-06 11:12:56.022146449 -0700
-+++ b/ath10k-5.7/mac.c	2021-07-06 19:37:52.352753693 -0700
-@@ -8286,7 +8286,7 @@
- 				  struct ieee80211_channel *channel)
- {
- 	int ret;
--	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
-+	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
- 
- 	lockdep_assert_held(&ar->conf_mutex);
- 

feeds/ipq40xx/ath10k-ct/patches/970-add-survey-local-bss-receive-time

@@ -1,31 +0,0 @@
---- a/ath10k-5.7/wmi.c
-+++ b/ath10k-5.7/wmi.c
-@@ -6347,16 +6347,18 @@
- 
- 	survey = &ar->survey[idx];
- 
--	survey->noise     = noise_floor;
--	survey->time      = div_u64(total, cc_freq_hz);
--	survey->time_busy = div_u64(busy, cc_freq_hz);
--	survey->time_rx   = div_u64(rx_bss, cc_freq_hz);
--	survey->time_tx   = div_u64(tx, cc_freq_hz);
--	survey->filled   |= (SURVEY_INFO_NOISE_DBM |
--			     SURVEY_INFO_TIME |
--			     SURVEY_INFO_TIME_BUSY |
--			     SURVEY_INFO_TIME_RX |
--			     SURVEY_INFO_TIME_TX);
-+	survey->noise       = noise_floor;
-+	survey->time        = div_u64(total, cc_freq_hz);
-+	survey->time_busy   = div_u64(busy, cc_freq_hz);
-+	survey->time_rx     = div_u64(rx, cc_freq_hz);
-+	survey->time_bss_rx = div_u64(rx_bss, cc_freq_hz);
-+	survey->time_tx     = div_u64(tx, cc_freq_hz);
-+	survey->filled     |= (SURVEY_INFO_NOISE_DBM |
-+			       SURVEY_INFO_TIME |
-+			       SURVEY_INFO_TIME_BUSY |
-+			       SURVEY_INFO_TIME_RX |
-+			       SURVEY_INFO_TIME_TX |
-+			       SURVEY_INFO_TIME_BSS_RX);
- exit:
- 	spin_unlock_bh(&ar->data_lock);
- 	complete(&ar->bss_survey_done);

feeds/ipq40xx/ath10k-ct/patches/999-ath10k-threading.patch

@@ -1,14 +0,0 @@
-Index: ath10k-ct-2021-05-22b-54a9ac02/ath10k-5.7/core.c
-===================================================================
---- ath10k-ct-2021-05-22b-54a9ac02.orig/ath10k-5.7/core.c
-+++ ath10k-ct-2021-05-22b-54a9ac02/ath10k-5.7/core.c
-@@ -4146,6 +4146,9 @@ struct ath10k *ath10k_core_create(size_t
- 	INIT_WORK(&ar->stop_scan_work, ath10k_wmi_stop_scan_work);
- 
- 	init_dummy_netdev(&ar->napi_dev);
-+	snprintf(ar->napi_dev.name, sizeof(ar->napi_dev.name), "%s",
-+		 wiphy_name(ar->hw->wiphy));
-+	ar->napi_dev.threaded = 1;
- 
- 	ret = ath10k_coredump_create(ar);
- 	if (ret)

feeds/ipq40xx/ath10k-firmware/Makefile

@@ -1,182 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ath10k-firmware
-PKG_SOURCE_DATE:=2019-10-03
-PKG_SOURCE_VERSION:=d622d160e9f552ead68d9ae81b715422892dc2ef
-PKG_MIRROR_HASH:=2e504e071c3f896d629c4cfffe7ff4b5f1acdb4fecd3f01e8ff8c73e87a67cc7
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git
-
-PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ath10k-firmware-default
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  DEPENDS:=
-endef
-
-define Package/ath10k-firmware-qca9887
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for QCA9887 devices
-endef
-
-define Package/ath10k-firmware-qca9888
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for QCA9888 devices
-endef
-
-define Package/ath10k-firmware-qca988x
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for QCA988x devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-endef
-
-define Package/ath10k-firmware-qca99x0
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for QCA99x0 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-endef
-
-define Package/ath10k-firmware-qca99x0/description
-Standard ath10k firmware for QCA99x0 from QCA
-This firmware conflicts with the CT 99x0 firmware, so select only
-one.
-endef
-
-define Package/ath10k-firmware-qca9984
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for QCA9984 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-endef
-
-define Package/ath10k-firmware-qca4019
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for IPQ/QCA4019 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-endef
-
-define Package/ath10k-firmware-qca6174
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k firmware for QCA6174 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-endef
-
-QCA99X0_BOARD_REV:=ddcec9efd245da9365c474f513a855a55f3ac7fe
-QCA99X0_BOARD_FILE:=board-2.bin.$(QCA99X0_BOARD_REV)
-
-define Download/qca99x0-board
-  URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0
-  URL_FILE:=board-2.bin?id=$(QCA99X0_BOARD_REV)
-  FILE:=$(QCA99X0_BOARD_FILE)
-  HASH:=03711ac21e60ef59d3815e235eb721c0c22851b5410299411085aa6f2af45401
-endef
-$(eval $(call Download,qca99x0-board))
-
-define Build/Compile
-
-endef
-
-define Package/ath10k-firmware-qca4019/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA4019/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00057 \
-		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca9887/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA9887/hw1.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00047 \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-5.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
-endef
-
-define Package/ath10k-firmware-qca9888/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA9888/hw2.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
-		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca988x/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA988X/hw2.0/board.bin \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA988X/hw2.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00047 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca6174/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw2.1
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA6174/hw2.1/board-2.bin \
-		$(1)/lib/firmware/ath10k/QCA6174/hw2.1/
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA6174/hw2.1/firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 \
-		$(1)/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw3.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA6174/hw3.0/board-2.bin \
-		$(1)/lib/firmware/ath10k/QCA6174/hw3.0/
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA6174/hw3.0/4.4.1.c1/firmware-6.bin_RM.4.4.1.c1-00042-QCARMSWP-1 \
-		$(1)/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
-endef
-
-define Package/ath10k-firmware-qca99x0/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA99X0/hw2.0/firmware-5.bin_10.4.1.00030-1 \
-		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
-endef
-
-define Package/ath10k-firmware-qca9984/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/QCA9984/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
-		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
-endef
-
-$(eval $(call BuildPackage,ath10k-firmware-qca9887))
-#$(eval $(call BuildPackage,ath10k-firmware-qca9888))
-$(eval $(call BuildPackage,ath10k-firmware-qca988x))
-#$(eval $(call BuildPackage,ath10k-firmware-qca99x0))
-#$(eval $(call BuildPackage,ath10k-firmware-qca6174))
-#$(eval $(call BuildPackage,ath10k-firmware-qca9984))
-#$(eval $(call BuildPackage,ath10k-firmware-qca4019))

feeds/ipq40xx/batctl/Makefile

@@ -1,231 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=batctl
-PKG_VERSION:=2020.2
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
-PKG_HASH:=d29cdb53ee68abd5027eae07d9fd645b3f154e0d577efa2666c1334bb6d60efd
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
-PKG_LICENSE:=GPL-2.0-only ISC MIT
-PKG_LICENSE_FILES:=LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT LICENSES/deprecated/ISC
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/batctl/Default
-  SECTION:=net
-  CATEGORY:=Network
-  URL:=https://www.open-mesh.org/
-  DEPENDS:=+libnl-tiny +libc +librt
-  PROVIDES:=batctl
-endef
-
-define Package/batctl/description
-  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
-  It is an easier method for configuring batman-adv and provides some
-  additional tools for debugging as well. This package builds
-  version $(PKG_VERSION) of the user space utility.
-endef
-
-define Package/batctl-tiny
-$(call Package/batctl/Default)
-  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Minimal)
-  VARIANT:=tiny
-  ALTERNATIVES:=100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
-endef
-
-define Package/batctl-tiny/description
-$(Package/batctl/description)
-  Only configuration relevant subcommands are enabled.
-endef
-
-define Package/batctl-default
-$(call Package/batctl/Default)
-  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Default)
-  VARIANT:=default
-  ALTERNATIVES:=200:/usr/sbin/batctl:/usr/libexec/batctl-default
-endef
-
-define Package/batctl-default/description
-$(Package/batctl/description)
-  Standard subcommands for configuration and online debugging are enabled.
-endef
-
-define Package/batctl-full
-$(call Package/batctl/Default)
-  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Full)
-  VARIANT:=full
-  ALTERNATIVES:=300:/usr/sbin/batctl:/usr/libexec/batctl-full
-endef
-
-define Package/batctl-full/description
-$(Package/batctl/description)
-  Subcommands for configuration, online and offline debugging are enabled.
-endef
-
-# The linker can identify unused sections of a binary when each symbol is stored
-# in a separate section. This mostly removes unused linker sections and reduces
-# the size by ~3% on mipsel.
-
-TARGET_CFLAGS  += -ffunction-sections -fdata-sections
-TARGET_LDFLAGS += -Wl,--gc-sections
-
-# Link-time optimization allows to move parts of the optimization from the single
-# source file to the global source view. This is done by emitting the GIMPLE
-# representation in each object file and analyzing it again during the link step.
-
-TARGET_CFLAGS  += -flto
-TARGET_LDFLAGS += -fuse-linker-plugin
-
-MAKE_VARS += \
-        LIBNL_NAME="libnl-tiny" \
-        LIBNL_GENL_NAME="libnl-tiny"
-
-MAKE_FLAGS += \
-        REVISION="$(PKG_VERSION)-openwrt-$(PKG_RELEASE)"
-
-config-n := \
-	aggregation \
-	ap_isolation \
-	backbonetable \
-	bisect_iv \
-	bonding \
-	bridge_loop_avoidance \
-	claimtable \
-	dat_cache \
-	distributed_arp_table \
-	elp_interval \
-	event \
-	fragmentation \
-	gateways \
-	gw_mode \
-	hop_penalty \
-	interface \
-	isolation_mark \
-	loglevel \
-	mcast_flags \
-	multicast_fanout \
-	multicast_forceflood \
-	multicast_mode \
-	nc_nodes \
-	neighbors \
-	network_coding \
-	orig_interval \
-	originators \
-	ping \
-	routing_algo \
-	statistics \
-	tcpdump \
-	throughput_override \
-	throughputmeter \
-	traceroute \
-	transglobal \
-	translate \
-	translocal \
-
-config-settings := \
-	aggregation \
-	ap_isolation \
-	bonding \
-	bridge_loop_avoidance \
-	distributed_arp_table \
-	elp_interval \
-	fragmentation \
-	gw_mode \
-	hop_penalty \
-	interface \
-	isolation_mark \
-	loglevel \
-	multicast_fanout \
-	multicast_forceflood \
-	multicast_mode \
-	network_coding \
-	orig_interval \
-	routing_algo \
-	throughput_override \
-
-config-tables := \
-	backbonetable \
-	claimtable \
-	dat_cache \
-	gateways \
-	loglevel \
-	nc_nodes \
-	neighbors \
-	originators \
-	statistics \
-	transglobal \
-	translocal \
-
-config-tools := \
-	event \
-	ping \
-	tcpdump \
-	throughputmeter \
-	traceroute \
-	translate \
-
-config-extratools := \
-	bisect_iv \
-
-ifeq ($(BUILD_VARIANT),tiny)
-
-config-y := \
-	$(config-settings) \
-
-endif
-
-ifeq ($(BUILD_VARIANT),default)
-
-config-y := \
-	$(config-settings) \
-	$(config-tables) \
-	$(config-tools) \
-
-endif
-
-ifeq ($(BUILD_VARIANT),full)
-
-config-y := \
-	$(config-settings) \
-	$(config-tables) \
-	$(config-tools) \
-	$(config-extratools) \
-
-endif
-
-define ConfigVars
-$(subst $(space),,$(foreach opt,$(config-$(1)),CONFIG_$(opt)=$(1)
-))
-endef
-
-define batctl_config
-$(call ConfigVars,n)$(call ConfigVars,y)
-endef
-$(eval $(call shexport,batctl_config))
-
-MAKE_FLAGS += $$$$$(call shvar,batctl_config)
-
-define Package/batctl-tiny/install
-	$(INSTALL_DIR) $(1)/usr/libexec
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-tiny
-endef
-
-define Package/batctl-default/install
-	$(INSTALL_DIR) $(1)/usr/libexec
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-default
-endef
-
-define Package/batctl-full/install
-	$(INSTALL_DIR) $(1)/usr/libexec
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-full
-endef
-
-$(eval $(call BuildPackage,batctl-default))
-$(eval $(call BuildPackage,batctl-tiny))
-$(eval $(call BuildPackage,batctl-full))

feeds/ipq40xx/batman-adv/Config.in

@@ -1,110 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Copyright (C) 2007-2019  B.A.T.M.A.N. contributors:
-#
-# Marek Lindner, Simon Wunderlich
-
-#
-# B.A.T.M.A.N meshing protocol
-#
-
-config BATMAN_ADV_BATMAN_V
-	bool "B.A.T.M.A.N. V protocol"
-	depends on PACKAGE_kmod-batman-adv
-	default y
-	help
-	  This option enables the B.A.T.M.A.N. V protocol, the successor
-	  of the currently used B.A.T.M.A.N. IV protocol. The main
-	  changes include splitting of the OGM protocol into a neighbor
-	  discovery protocol (Echo Location Protocol, ELP) and a new OGM
-	  Protocol OGMv2 for flooding protocol information through the
-	  network, as well as a throughput based metric.
-	  B.A.T.M.A.N. V is currently considered experimental and not
-	  compatible to B.A.T.M.A.N. IV networks.
-
-config BATMAN_ADV_BLA
-	bool "Bridge Loop Avoidance"
-	depends on PACKAGE_kmod-batman-adv
-	select PACKAGE_kmod-lib-crc16
-	default y
-	help
-	  This option enables BLA (Bridge Loop Avoidance), a mechanism
-	  to avoid Ethernet frames looping when mesh nodes are connected
-	  to both the same LAN and the same mesh. If you will never use
-	  more than one mesh node in the same LAN, you can safely remove
-	  this feature and save some space.
-
-config BATMAN_ADV_DAT
-	bool "Distributed ARP Table"
-	depends on PACKAGE_kmod-batman-adv
-	default y
-	help
-	  This option enables DAT (Distributed ARP Table), a DHT based
-	  mechanism that increases ARP reliability on sparse wireless
-	  mesh networks. If you think that your network does not need
-	  this option you can safely remove it and save some space.
-
-config BATMAN_ADV_NC
-	bool "Network Coding"
-	depends on PACKAGE_kmod-batman-adv
-	help
-	  This option enables network coding, a mechanism that aims to
-	  increase the overall network throughput by fusing multiple
-	  packets in one transmission.
-	  Note that interfaces controlled by batman-adv must be manually
-	  configured to have promiscuous mode enabled in order to make
-	  network coding work.
-	  If you think that your network does not need this feature you
-	  can safely disable it and save some space.
-
-config BATMAN_ADV_MCAST
-	bool "Multicast optimisation"
-	depends on PACKAGE_kmod-batman-adv
-	default y
-	help
-	  This option enables the multicast optimisation which aims to
-	  reduce the air overhead while improving the reliability of
-	  multicast messages.
-
-config BATMAN_ADV_DEBUGFS
-	bool "batman-adv debugfs entries"
-	depends on PACKAGE_kmod-batman-adv
-	select KERNEL_DEBUG_FS
-	help
-	  Enable this to export routing related debug tables via debugfs.
-	  The information for each soft-interface and used hard-interface can be
-	  found under batman_adv/
-
-	  If unsure, say N.
-
-config BATMAN_ADV_DEBUG
-	bool "B.A.T.M.A.N. debugging"
-	depends on PACKAGE_kmod-batman-adv
-	help
-	  This is an option for use by developers; most people should
-	  say N here. This enables compilation of support for
-	  outputting debugging information to the debugfs log or tracing
-	  buffer. The output is controlled via the batadv netdev specific
-	  log_level setting.
-
-config BATMAN_ADV_SYSFS
-	bool "batman-adv sysfs entries"
-	depends on PACKAGE_kmod-batman-adv
-	help
-	  Say Y here if you want to enable batman-adv device configuration and
-	  status interface through sysfs attributes. It is replaced by the
-	  batadv generic netlink family but still used by various userspace
-	  tools and scripts.
-
-	  If unsure, say Y.
-
-config BATMAN_ADV_TRACING
-	bool "B.A.T.M.A.N. tracing support"
-	depends on PACKAGE_kmod-batman-adv
-	select KERNEL_FTRACE
-	select KERNEL_ENABLE_DEFAULT_TRACERS
-	help
-	  This is an option for use by developers; most people should
-	  say N here. Select this option to gather traces like the debug
-	  messages using the generic tracing infrastructure of the kernel.
-	  BATMAN_ADV_DEBUG must also be selected to get trace events for
-	  batadv_dbg.

feeds/ipq40xx/batman-adv/Makefile

@@ -1,91 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=batman-adv
-PKG_VERSION:=2020.2
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
-PKG_HASH:=a73f5ce72c6efa9dd7bd7cc8daa667d0982e12e40811c978bb652607bb5666a3
-PKG_EXTMOD_SUBDIRS:=net/batman-adv
-
-PKG_MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
-PKG_LICENSE:=GPL-2.0-only MIT
-PKG_LICENSE_FILES:=LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT
-
-STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
-
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/batman-adv
-  SUBMENU:=Network Support
-  TITLE:=B.A.T.M.A.N. Adv
-  URL:=https://www.open-mesh.org/
-  DEPENDS:=+BATMAN_ADV_BLA:kmod-lib-crc16 +kmod-lib-crc32c +kmod-cfg80211 +batctl
-  FILES:=$(PKG_BUILD_DIR)/net/batman-adv/batman-adv.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoProbe,batman-adv)
-endef
-
-define KernelPackage/batman-adv/description
-  B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
-  a routing protocol for multi-hop ad-hoc mesh networks. The
-  networks may be wired or wireless. See
-  https://www.open-mesh.org/ for more information and user space
-  tools. This package builds version $(PKG_VERSION) of the kernel
-  module.
-endef
-
-define KernelPackage/batman-adv/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/kmod-batman-adv/conffiles
-/etc/config/batman-adv
-endef
-
-PKG_EXTRA_KCONFIG:= \
-	CONFIG_BATMAN_ADV=m \
-	CONFIG_BATMAN_ADV_DEBUG=$(if $(CONFIG_BATMAN_ADV_DEBUG),y,n) \
-	CONFIG_BATMAN_ADV_DEBUGFS=$(if $(CONFIG_BATMAN_ADV_DEBUGFS),y,n) \
-	CONFIG_BATMAN_ADV_BLA=$(if $(CONFIG_BATMAN_ADV_BLA),y,n) \
-	CONFIG_BATMAN_ADV_DAT=$(if $(CONFIG_BATMAN_ADV_DAT),y,n) \
-	CONFIG_BATMAN_ADV_MCAST=$(if $(CONFIG_BATMAN_ADV_MCAST),y,n) \
-	CONFIG_BATMAN_ADV_NC=$(if $(CONFIG_BATMAN_ADV_NC),y,n) \
-	CONFIG_BATMAN_ADV_BATMAN_V=$(if $(CONFIG_BATMAN_ADV_BATMAN_V),y,n) \
-	CONFIG_BATMAN_ADV_SYSFS=$(if $(CONFIG_BATMAN_ADV_SYSFS),y,n) \
-	CONFIG_BATMAN_ADV_TRACING=$(if $(CONFIG_BATMAN_ADV_TRACING),y,n) \
-
-PKG_EXTRA_CFLAGS:= \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(PKG_EXTRA_KCONFIG)))) \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(PKG_EXTRA_KCONFIG)))) \
-
-NOSTDINC_FLAGS = \
-	-I$(PKG_BUILD_DIR)/net/batman-adv \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
-	-I$(STAGING_DIR)/usr/include/mac80211 \
-	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
-	-I$(PKG_BUILD_DIR)/include/ \
-	-include backport/autoconf.h \
-	-include backport/backport.h \
-	-include $(PKG_BUILD_DIR)/compat-hacks.h \
-	-DBATADV_SOURCE_VERSION=\\\"$(PKG_VERSION)-openwrt-$(PKG_RELEASE)\\\"
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) \
-		M="$(PKG_BUILD_DIR)/net/batman-adv" \
-		$(PKG_EXTRA_KCONFIG) \
-		EXTRA_CFLAGS="$(PKG_EXTRA_CFLAGS)" \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		modules
-endef
-
-define KernelPackage/batman-adv/install
-	$(CP) ./files/. $(1)/
-endef
-
-$(eval $(call KernelPackage,batman-adv))

feeds/ipq40xx/batman-adv/files/etc/uci-defaults/99-migrate-batadv_hardif

@@ -1,97 +0,0 @@
-#!/bin/sh
-
-# This UCI-Defaults script will split the batadv proto network interfaces
-# in batadv_hardif and batadv proto. The configuration options from
-# /etc/config/batman-adv will be moved to the latter.
-
-. /lib/functions.sh
-
-proto_batadv_to_batadv_hardif() {
-    local section="$1"
-    local proto
-    local mesh
-    local routing_algo
-
-    config_get proto "${section}" proto
-    config_get mesh "${section}" mesh
-    config_get routing_algo "${section}" routing_algo
-
-    if [ -z "$mesh" -o "${proto}" != "batadv" ]; then
-        continue
-    fi
-
-    uci set network."${section}".proto="batadv_hardif"
-    uci rename network."${section}".mesh="master"
-    uci delete network."${section}".routing_algo
-
-    # create new section or adjust existing one
-    uci set network."${mesh}"=interface
-    uci set network."${mesh}".proto=batadv
-    [ -n "${routing_algo}" ]  && uci set network."${mesh}".routing_algo="${routing_algo}"
-}
-
-mv_batadv_config_section() {
-    local section="$1"
-    local aggregated_ogms
-    local ap_isolation
-    local bonding
-    local bridge_loop_avoidance
-    local distributed_arp_table
-    local fragmentation
-    local gw_bandwidth
-    local gw_mode
-    local gw_sel_class
-    local hop_penalty
-    local isolation_mark
-    local log_level
-    local multicast_mode
-    local network_coding
-    local orig_interval
-
-    config_get aggregated_ogms "${section}" aggregated_ogms
-    config_get ap_isolation "${section}" ap_isolation
-    config_get bonding "${section}" bonding
-    config_get bridge_loop_avoidance "${section}" bridge_loop_avoidance
-    config_get distributed_arp_table "${section}" distributed_arp_table
-    config_get fragmentation "${section}" fragmentation
-    config_get gw_bandwidth "${section}" gw_bandwidth
-    config_get gw_mode "${section}" gw_mode
-    config_get gw_sel_class "${section}" gw_sel_class
-    config_get hop_penalty "${section}" hop_penalty
-    config_get isolation_mark "${section}" isolation_mark
-    config_get log_level "${section}" log_level
-    config_get multicast_mode "${section}" multicast_mode
-    config_get network_coding "${section}" network_coding
-    config_get orig_interval "${section}" orig_interval
-
-    # update section in case it exists
-    [ -n "${aggregated_ogms}" ]  && uci set network."${section}".aggregated_ogms="${aggregated_ogms}"
-    [ -n "${ap_isolation}" ]  && uci set network."${section}".ap_isolation="${ap_isolation}"
-    [ -n "${bonding}" ]  && uci set network."${section}".bonding="${bonding}"
-    [ -n "${bridge_loop_avoidance}" ]  && uci set network."${section}".bridge_loop_avoidance="${bridge_loop_avoidance}"
-    [ -n "${distributed_arp_table}" ]  && uci set network."${section}".distributed_arp_table="${distributed_arp_table}"
-    [ -n "${fragmentation}" ]  && uci set network."${section}".fragmentation="${fragmentation}"
-    [ -n "${gw_bandwidth}" ]  && uci set network."${section}".gw_bandwidth="${gw_bandwidth}"
-    [ -n "${gw_mode}" ]  && uci set network."${section}".gw_mode="${gw_mode}"
-    [ -n "${gw_sel_class}" ]  && uci set network."${section}".gw_sel_class="${gw_sel_class}"
-    [ -n "${hop_penalty}" ]  && uci set network."${section}".hop_penalty="${hop_penalty}"
-    [ -n "${isolation_mark}" ]  && uci set network."${section}".isolation_mark="${isolation_mark}"
-    [ -n "${log_level}" ]  && uci set network."${section}".log_level="${log_level}"
-    [ -n "${multicast_mode}" ]  && uci set network."${section}".multicast_mode="${multicast_mode}"
-    [ -n "${network_coding}" ]  && uci set network."${section}".network_coding="${network_coding}"
-    [ -n "${orig_interval}" ]  && uci set network."${section}".orig_interval="${orig_interval}"
-}
-
-if [ -f /etc/config/batman-adv ]; then
-    config_load network
-    config_foreach proto_batadv_to_batadv_hardif 'interface'
-    uci commit network
-
-    config_load batman-adv
-    config_foreach mv_batadv_config_section 'mesh'
-    uci commit network
-
-    rm -f /etc/config/batman-adv
-fi
-
-exit 0

feeds/ipq40xx/batman-adv/files/lib/netifd/proto/batadv.sh

@@ -1,123 +0,0 @@
-#!/bin/sh
-
-[ -n "$INCLUDE_ONLY" ] || {
-	. /lib/functions.sh
-	. ../netifd-proto.sh
-	init_proto "$@"
-}
-
-proto_batadv_init_config() {
-	no_device=1
-	available=1
-
-	proto_config_add_boolean 'aggregated_ogms:bool'
-	proto_config_add_boolean 'ap_isolation:bool'
-	proto_config_add_boolean 'bonding:bool'
-	proto_config_add_boolean 'bridge_loop_avoidance:bool'
-	proto_config_add_boolean 'distributed_arp_table:bool'
-	proto_config_add_boolean 'fragmentation:bool'
-	proto_config_add_string 'gw_bandwidth'
-	proto_config_add_string 'gw_mode'
-	proto_config_add_int 'gw_sel_class'
-	proto_config_add_int 'hop_penalty'
-	proto_config_add_string 'isolation_mark'
-	proto_config_add_string 'log_level'
-	proto_config_add_int 'multicast_fanout'
-	proto_config_add_boolean 'multicast_mode:bool'
-	proto_config_add_boolean 'network_coding:bool'
-	proto_config_add_int 'orig_interval'
-	proto_config_add_string 'routing_algo'
-}
-
-proto_batadv_setup() {
-	local config="$1"
-	local iface="$config"
-
-	local aggregated_ogms
-	local ap_isolation
-	local bonding
-	local bridge_loop_avoidance
-	local distributed_arp_table
-	local fragmentation
-	local gw_bandwidth
-	local gw_mode
-	local gw_sel_class
-	local hop_penalty
-	local isolation_mark
-	local log_level
-	local multicast_fanout
-	local multicast_mode
-	local network_coding
-	local orig_interval
-	local routing_algo
-
-	json_get_vars aggregated_ogms
-	json_get_vars ap_isolation
-	json_get_vars bonding
-	json_get_vars bridge_loop_avoidance
-	json_get_vars distributed_arp_table
-	json_get_vars fragmentation
-	json_get_vars gw_bandwidth
-	json_get_vars gw_mode
-	json_get_vars gw_sel_class
-	json_get_vars hop_penalty
-	json_get_vars isolation_mark
-	json_get_vars log_level
-	json_get_vars multicast_fanout
-	json_get_vars multicast_mode
-	json_get_vars network_coding
-	json_get_vars orig_interval
-	json_get_vars routing_algo
-
-	set_default routing_algo 'BATMAN_IV'
-
-	batctl routing_algo "$routing_algo"
-	batctl meshif "$iface" interface create
-
-	[ -n "$aggregated_ogms" ] && batctl meshif "$iface" aggregation "$aggregated_ogms"
-	[ -n "$ap_isolation" ] && batctl meshif "$iface" ap_isolation "$ap_isolation"
-	[ -n "$bonding" ] && batctl meshif "$iface" bonding "$bonding"
-	[ -n "$bridge_loop_avoidance" ] &&  batctl meshif "$iface" bridge_loop_avoidance "$bridge_loop_avoidance" 2>&-
-	[ -n "$distributed_arp_table" ] && batctl meshif "$iface" distributed_arp_table "$distributed_arp_table" 2>&-
-	[ -n "$fragmentation" ] && batctl meshif "$iface" fragmentation "$fragmentation"
-
-	case "$gw_mode" in
-	server)
-		if [ -n "$gw_bandwidth" ]; then
-			batctl meshif "$iface" gw_mode "server" "$gw_bandwidth"
-		else
-			batctl meshif "$iface" gw_mode "server"
-		fi
-		;;
-	client)
-		if [ -n "$gw_sel_class" ]; then
-			batctl meshif "$iface" gw_mode "client" "$gw_sel_class"
-		else
-			batctl meshif "$iface" gw_mode "client"
-		fi
-		;;
-	*)
-		batctl meshif "$iface" gw_mode "off"
-		;;
-	esac
-
-	[ -n "$hop_penalty" ] && batctl meshif "$iface" hop_penalty "$hop_penalty"
-	[ -n "$isolation_mark" ] && batctl meshif "$iface" isolation_mark "$isolation_mark"
-	[ -n "$multicast_fanout" ] && batctl meshif "$iface" multicast_fanout "$multicast_fanout"
-	[ -n "$multicast_mode" ] && batctl meshif "$iface" multicast_mode "$multicast_mode" 2>&-
-	[ -n "$network_coding" ] && batctl meshif "$iface" network_coding "$network_coding" 2>&-
-	[ -n "$log_level" ] && batctl meshif "$iface" loglevel "$log_level" 2>&-
-	[ -n "$orig_interval" ] && batctl meshif "$iface" orig_interval "$orig_interval"
-
-	proto_init_update "$iface" 1
-	proto_send_update "$config"
-}
-
-proto_batadv_teardown() {
-	local config="$1"
-	local iface="$config"
-
-	batctl meshif "$iface" interface destroy
-}
-
-add_protocol batadv

feeds/ipq40xx/batman-adv/files/lib/netifd/proto/batadv_hardif.sh

@@ -1,49 +0,0 @@
-#!/bin/sh
-
-[ -n "$INCLUDE_ONLY" ] || {
-	. /lib/functions.sh
-	. ../netifd-proto.sh
-	init_proto "$@"
-}
-
-proto_batadv_hardif_init_config() {
-	proto_config_add_int 'elp_interval'
-	proto_config_add_string "master"
-	proto_config_add_string 'throughput_override'
-}
-
-proto_batadv_hardif_setup() {
-	local config="$1"
-	local iface="$2"
-
-	local elp_interval
-	local master
-	local throughput_override
-
-	json_get_vars elp_interval
-	json_get_vars master
-	json_get_vars throughput_override
-
-	( proto_add_host_dependency "$config" '' "$master" )
-
-	batctl meshif "$master" interface -M add "$iface"
-
-	[ -n "$elp_interval" ] && batctl hardif "$iface" elp_interval "$elp_interval"
-	[ -n "$throughput_override" ] && batctl hardif "$iface" throughput_override "$throughput_override"
-
-	proto_init_update "$iface" 1
-	proto_send_update "$config"
-}
-
-proto_batadv_hardif_teardown() {
-	local config="$1"
-	local iface="$2"
-
-	local master
-
-	json_get_vars master
-
-	batctl meshif "$master" interface -M del "$iface" || true
-}
-
-add_protocol batadv_hardif

feeds/ipq40xx/batman-adv/files/lib/netifd/proto/batadv_vlan.sh

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. ../netifd-proto.sh
-init_proto "$@"
-
-proto_batadv_vlan_init_config() {
-	proto_config_add_boolean 'ap_isolation:bool'
-}
-
-proto_batadv_vlan_setup() {
-	local config="$1"
-	local iface="$2"
-
-	# batadv_vlan options
-	local ap_isolation
-
-	json_get_vars ap_isolation
-
-	[ -n "$ap_isolation" ] && batctl vlan "$iface" ap_isolation "$ap_isolation"
-	proto_init_update "$iface" 1
-	proto_send_update "$config"
-}
-
-add_protocol batadv_vlan

feeds/ipq40xx/batman-adv/src/compat-hacks.h

@@ -1,181 +0,0 @@
-/* Please avoid adding hacks here - instead add it to mac80211/backports.git */
-
-#undef CONFIG_MODULE_STRIPPED
-
-#include <linux/version.h>	/* LINUX_VERSION_CODE */
-#include <linux/types.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
-
-#include <linux/netdevice.h>
-
-#define netdev_master_upper_dev_link(dev, upper_dev, upper_priv, upper_info, extack) ({\
-	BUILD_BUG_ON(extack != NULL); \
-	netdev_master_upper_dev_link(dev, upper_dev, upper_priv, upper_info); \
-})
-
-#endif /* < KERNEL_VERSION(4, 15, 0) */
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 16, 0)
-
-#ifndef sizeof_field
-#define sizeof_field(TYPE, MEMBER) sizeof((((TYPE *)0)->MEMBER))
-#endif
-
-#endif /* < KERNEL_VERSION(4, 16, 0) */
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 1, 0)
-
-#include_next <linux/igmp.h>
-#include_next <net/addrconf.h>
-
-static inline int batadv_ipv6_mc_check_mld1(struct sk_buff *skb)
-{
-	return ipv6_mc_check_mld(skb, NULL);
-}
-
-static inline int batadv_ipv6_mc_check_mld2(struct sk_buff *skb,
-					    struct sk_buff **skb_trimmed)
-{
-	return ipv6_mc_check_mld(skb, skb_trimmed);
-}
-
-#define ipv6_mc_check_mld_get(_1, _2, ipv6_mc_check_mld_name, ...) ipv6_mc_check_mld_name
-#define ipv6_mc_check_mld(...) \
-	ipv6_mc_check_mld_get(__VA_ARGS__, batadv_ipv6_mc_check_mld2, batadv_ipv6_mc_check_mld1)(__VA_ARGS__)
-
-static inline int batadv_ip_mc_check_igmp1(struct sk_buff *skb)
-{
-	return ip_mc_check_igmp(skb, NULL);
-}
-
-static inline int batadv_ip_mc_check_igmp2(struct sk_buff *skb,
-					   struct sk_buff **skb_trimmed)
-{
-	return ip_mc_check_igmp(skb, skb_trimmed);
-}
-
-#define ip_mc_check_igmp_get(_1, _2, ip_mc_check_igmp_name, ...) ip_mc_check_igmp_name
-#define ip_mc_check_igmp(...) \
-	ip_mc_check_igmp_get(__VA_ARGS__, batadv_ip_mc_check_igmp2, batadv_ip_mc_check_igmp1)(__VA_ARGS__)
-
-#endif /* < KERNEL_VERSION(5, 1, 0) */
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
-
-#define batadv_softif_slave_add(__dev, __slave_dev, __extack) \
-	batadv_softif_slave_add(__dev, __slave_dev)
-
-#endif /* < KERNEL_VERSION(4, 15, 0) */
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 0, 0)
-
-static inline int batadv_access_ok(int type, const void __user *p,
-				   unsigned long size)
-{
-	return access_ok(type, p, size);
-}
-
-#ifdef access_ok
-#undef access_ok
-#endif
-
-#define access_ok_get(_1, _2, _3 , access_ok_name, ...) access_ok_name
-#define access_ok(...) \
-	access_ok_get(__VA_ARGS__, access_ok3, access_ok2)(__VA_ARGS__)
-
-#define access_ok2(addr, size)	batadv_access_ok(VERIFY_WRITE, (addr), (size))
-#define access_ok3(type, addr, size)	batadv_access_ok((type), (addr), (size))
-
-#endif /* < KERNEL_VERSION(5, 0, 0) */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 4, 0)
-
-#ifndef fallthrough
-#if __GNUC__ > 7 && !defined(__CHECKER__)
-# define fallthrough                    __attribute__((__fallthrough__))
-#else
-# define fallthrough                    do {} while (0)  /* fallthrough */
-#endif
-#endif
-
-#endif /* < KERNEL_VERSION(5, 4, 0) */
-
-/* <DECLARE_EWMA> */
-
-#include <linux/version.h>
-#include_next <linux/average.h>
-
-#include <linux/bug.h>
-
-#ifdef DECLARE_EWMA
-#undef DECLARE_EWMA
-#endif /* DECLARE_EWMA */
-
-/*
- * Exponentially weighted moving average (EWMA)
- *
- * This implements a fixed-precision EWMA algorithm, with both the
- * precision and fall-off coefficient determined at compile-time
- * and built into the generated helper funtions.
- *
- * The first argument to the macro is the name that will be used
- * for the struct and helper functions.
- *
- * The second argument, the precision, expresses how many bits are
- * used for the fractional part of the fixed-precision values.
- *
- * The third argument, the weight reciprocal, determines how the
- * new values will be weighed vs. the old state, new values will
- * get weight 1/weight_rcp and old values 1-1/weight_rcp. Note
- * that this parameter must be a power of two for efficiency.
- */
-
-#define DECLARE_EWMA(name, _precision, _weight_rcp)			\
-	struct ewma_##name {						\
-		unsigned long internal;					\
-	};								\
-	static inline void ewma_##name##_init(struct ewma_##name *e)	\
-	{								\
-		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
-		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
-		/*							\
-		 * Even if you want to feed it just 0/1 you should have	\
-		 * some bits for the non-fractional part...		\
-		 */							\
-		BUILD_BUG_ON((_precision) > 30);			\
-		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
-		e->internal = 0;					\
-	}								\
-	static inline unsigned long					\
-	ewma_##name##_read(struct ewma_##name *e)			\
-	{								\
-		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
-		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
-		BUILD_BUG_ON((_precision) > 30);			\
-		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
-		return e->internal >> (_precision);			\
-	}								\
-	static inline void ewma_##name##_add(struct ewma_##name *e,	\
-					     unsigned long val)		\
-	{								\
-		unsigned long internal = READ_ONCE(e->internal);	\
-		unsigned long weight_rcp = ilog2(_weight_rcp);		\
-		unsigned long precision = _precision;			\
-									\
-		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
-		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
-		BUILD_BUG_ON((_precision) > 30);			\
-		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
-									\
-		WRITE_ONCE(e->internal, internal ?			\
-			(((internal << weight_rcp) - internal) +	\
-				(val << precision)) >> weight_rcp :	\
-			(val << precision));				\
-	}
-
-/* </DECLARE_EWMA> */

feeds/ipq40xx/ipq-wifi/Makefile

@@ -1,151 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/version.mk
-
-PKG_NAME:=ipq-wifi
-PKG_RELEASE:=1
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-endef
-
-# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
-# to generate the board-* files here.
-#
-# This is intended to be used on an interim basis until device-specific
-# board data for new devices is available through the upstream compilation
-#
-# Please send a mail with your device-specific board files upstream.
-# You can find instructions and examples on the linux-wireless wiki:
-# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-
-ALLWIFIBOARDS:= \
-	8dev_habanero-dvk \
-	aruba_ap-303 \
-	avm_fritzrepeater-1200 \
-	buffalo_wtr-m2133hp \
-	cellc_rtl30vw \
-	devolo_magic-2-wifi-next \
-	dlink_dap2610 \
-	edgecore_ecw5410 \
-	edgecore_ssw2ac2600 \
-	edgecore_oap100 \
-	engenius_eap2200 \
-	engenius_emd1 \
-	engenius_emr3500 \
-	ezviz_cs-w3-wd1200g-eup \
-	glinet_gl-ap1300 \
-	glinet_gl-s1300 \
-	linksys_ea8300 \
-	linksys_mr8300-v0 \
-	luma_wrtq-329acn \
-	mikrotik_hap-ac2 \
-	mikrotik_sxtsq-5-ac \
-	mobipromo_cm520-79f \
-	nec_wg2600hp3 \
-	plasmacloud_pa1200 \
-	plasmacloud_pa2200 \
-	qxwlan_e2600ac \
-	cig_wf610d \
-	wallys_dr40x9 \
-	tp-link_ec420-g1 \
-	udaya-a5-id2 \
-	hfcl_ion4
-
-ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
-
-define Package/ipq-wifi-default
-  SUBMENU:=ath10k Board-Specific Overrides
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
-  TITLE:=Custom Board
-endef
-
-define ipq-wifi-install-one-to
-  $(INSTALL_DIR)  $(2)/lib/firmware/ath10k/$(3)/
-  $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
-endef
-
-define ipq-wifi-install-one
-  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
-    $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
-  $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
-    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
-  $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
-    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
-    $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
-  )))
-
-endef
-# Blank line required at end of above define due to foreach context
-
-define generate-ipq-wifi-package
-  define Package/ipq-wifi-$(1)
-    $(call Package/ipq-wifi-default)
-    TITLE:=board-2.bin Overrides for $(2)
-    CONFLICTS:=$(PREV_BOARD)
-  endef
-
-  define Package/ipq-wifi-$(1)/description
-The $(2) requires board-specific, reference ("cal") data
-that is not yet present in the upstream wireless firmware distribution.
-
-This package supplies board-2.bin file(s) that, in the interim,
-overwrite those supplied by the ath10k-firmware-* packages.
-
-This is package is only necessary for the $(2).
-
-Do not install it for any other device!
-  endef
-
-  define Package/ipq-wifi-$(1)/install-overlay
-    $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
-      $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
-  endef
-
-  PREV_BOARD+=ipq-wifi-$(1)
-endef
-
-# Add board name to ALLWIFIBOARDS
-# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
-# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
-
-$(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
-$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
-$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
-$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
-$(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
-$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
-$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
-$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
-$(eval $(call generate-ipq-wifi-package,edgecore_ssw2ac2600,Edgecore SSW2AC2600))
-$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
-$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
-$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
-$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
-$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
-$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
-$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
-$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
-$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
-$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
-$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
-$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
-$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
-$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
-$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
-$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
-$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
-$(eval $(call generate-ipq-wifi-package,cig_wf610d,CIG WF_610D))
-$(eval $(call generate-ipq-wifi-package,tp-link_ec420-g1,tp-link EC420-G1))
-$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
-$(eval $(call generate-ipq-wifi-package,hfcl_ion4,HFCL ION4))
-$(eval $(call generate-ipq-wifi-package,udaya-a5-id2,udaya A5 ID2))
-
-$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

feeds/ipq40xx/ipq40xx/Makefile

@@ -1,25 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-ARCH:=arm
-BOARD:=ipq40xx
-BOARDNAME:=Qualcomm Atheros IPQ40XX
-FEATURES:=squashfs fpu ramdisk nand
-CPU_TYPE:=cortex-a7
-CPU_SUBTYPE:=neon-vfpv4
-SUBTARGETS:=generic mikrotik
-
-KERNEL_PATCHVER:=5.4
-KERNEL_TESTING_PATCHVER:=5.4
-DEVICE_TYPE:=qsdk
-
-KERNELNAME:=zImage Image dtbs
-
-include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += \
-	kmod-usb-dwc3-qcom \
-	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
-	kmod-ath10k-ct wpad-basic-wolfssl \
-	kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \
-	uboot-envtools
-
-$(eval $(call BuildTarget))

feeds/ipq40xx/ipq40xx/base-files/etc/board.d/01_leds

@@ -1,91 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-alfa-network,ap120c-ac)
-	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
-	;;
-asus,rt-ac58u)
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
-	;;
-avm,fritzbox-4040)
-	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
-	;;
-avm,fritzbox-7530 |\
-glinet,gl-b1300)
-	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
-	;;
-edgecore,oap100 |\
-edgecore,oap100e)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
-	;;
-
-engenius,eap1300)
-	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
-	ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
-	;;
-engenius,eap2200)
-	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
-	;;
-engenius,ens620ext)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
-	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
-	;;
-mikrotik,sxtsq-5-ac)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
-	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
-	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
-	;;
-mobipromo,cm520-79f)
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
-	;;
-netgear,ex6100v2 |\
-netgear,ex6150v2)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
-	;;
-qxwlan,e2600ac-c1 |\
-qxwlan,e2600ac-c2)
-	ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
-	;;
-edgecore,ecw5211 |\
-edgecore,spw2ac1200 |\
-edgecore,spw2ac1200-lan-poe |\
-cig,wf610d |\
-zyxel,nbg6617 |\
-zyxel,wre6606)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
-	;;
-hfcl,ion4)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "yellow:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "red:wlan5g" "phy1tpt"
-	;;
-esac
-
-board_config_flush
-
-exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/board.d/02_network

@@ -1,211 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2015 The Linux Foundation. All rights reserved.
-# Copyright (c) 2011-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ipq40xx_setup_interfaces()
-{
-	local board="$1"
-
-	case "$board" in
-	8dev,habanero-dvk|\
-	8dev,jalapeno|\
-	alfa-network,ap120c-ac|\
-	edgecore,spw2ac1200-lan-poe |\
-	engenius,emr3500|\
-	engenius,ens620ext|\
-	luma,wrtq-329acn|\
-	plasmacloud,pa1200|\
-	plasmacloud,pa2200|\
-	wallys,dr40x9)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
-	aruba,ap-303|\
-	aruba,ap-365|\
-	avm,fritzrepeater-1200|\
-	dlink,dap-2610 |\
-	engenius,eap1300|\
-	engenius,emd1|\
-	meraki,mr33|\
-	mikrotik,sxtsq-5-ac|\
-	netgear,ex6100v2|\
-	netgear,ex6150v2|\
-	tp-link,ec420-g1|\
-	hfcl,ion4|\
-	zyxel,wre6606)
-		ucidef_set_interface_wan "eth0"
-		;;
-	aruba,ap-303h)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
-		;;
-	asus,map-ac2200|\
-	cilab,meshpoint-one|\
-	cig,wf610d|\
-	edgecore,ecw5211|\
-	edgecore,spw2ac1200 |\
-	edgecore,oap100|\
-	edgecore,oap100e|\
-	udaya,a5-id2|\
-	openmesh,a42|\
-	openmesh,a62)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		;;
-	asus,rt-ac58u|\
-	mikrotik,hap-ac2|\
-	zyxel,nbg6617)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	avm,fritzbox-4040|\
-	linksys,ea6350v3|\
-	linksys,ea8300|\
-	linksys,mr8300)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	avm,fritzbox-7530)
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	avm,fritzrepeater-3000)
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "4:lan:1" "5:lan:2"
-		;;
-	compex,wpj419|\
-	compex,wpj428|\
-	engenius,eap2200)
-		ucidef_set_interface_lan "eth0 eth1"
-		;;
-	buffalo,wtr-m2133hp)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	cellc,rtl30vw)
-		ucidef_set_interface_lan "eth0"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan"
-		;;
-	devolo,magic-2-wifi-next)
-		ucidef_set_interface_lan "eth0 eth1 eth2"
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
-		;;
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-s1300)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan"
-		;;
-	mobipromo,cm520-79f)
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan:2" "4:lan:1"
-		ucidef_set_interface_wan "eth1"
-		;;
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
-		;;
-	unielec,u4019-32m)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
-		;;
-	um-325ac |\
-	um-510ac-v3 |\
-	um-550ac) 
-		ucidef_set_interface_wan "eth0"
-		ucidef_set_interface_lan "eth1"
-		;;
-	*)
-		echo "Unsupported hardware. Network interfaces not initialized"
-		;;
-	esac
-}
-
-ipq40xx_setup_macs()
-{
-	local board="$1"
-	local lan_mac=""
-	local wan_mac=""
-	local label_mac=""
-
-	case "$board" in
-	8dev,habanero-dvk)
-		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART=UBI_DEV
-		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
-		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
-		label_mac=$wan_mac
-		;;
-	cilab,meshpoint-one)
-		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
-		;;
-	devolo,magic-2-wifi-next)
-		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
-		label_mac=$lan_mac
-		;;
-	dlink,dap-2610)
-		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
-		label_mac=$lan_mac
-		;;
-	engenius,eap2200|\
-	engenius,emd1)
-		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		label_mac=$lan_mac
-		;;
-	engenius,emr3500)
-		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
-		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		label_mac=$wan_mac
-		;;
-	engenius,ens620ext)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		label_mac=$(mtd_get_mac_binary "ART" 0x6)
-		;;
-	linksys,ea6350v3)
-		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	mikrotik,hap-ac2)
-		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
-		lan_mac=$(macaddr_add $wan_mac 1)
-		label_mac="$wan_mac"
-		;;
-	mikrotik,sxtsq-5-ac)
-		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
-		label_mac="$lan_mac"
-		;;
-	esac
-
-	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
-	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ipq40xx_setup_interfaces $board
-ipq40xx_setup_macs $board
-board_config_flush
-
-exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/board.d/03_gpio_switches

@@ -1,29 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-cellc,rtl30vw)
-	ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
-	ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"
-	ucidef_add_gpio_switch "mcpie_vcc" "LTE power" "400" "0"
-	ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
-	;;
-cilab,meshpoint-one)
-	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1"
-	;;
-compex,wpj428)
-	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
-	;;
-wallys,dr40x9)
-	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "423" "0"
-	;;
-esac
-
-board_config_flush
-
-exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -1,315 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:01:00.0.bin")
-	case "$board" in
-	meraki,mr33)
-		caldata_extract_ubi "ART" 0x9000 0x844
-		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-pci-0000:01:00.0.bin")
-	case "$board" in
-	asus,map-ac2200)
-		caldata_extract_ubi "Factory" 0x9000 0x2f20
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	avm,fritzrepeater-3000)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
-		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x9000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
-		;;
-	engenius,eap2200 |\
-	openmesh,a62 |\
-	plasmacloud,pa2200)
-		caldata_extract "0:ART" 0x9000 0x2f20
-		;;
-	linksys,ea8300 |\
-	linksys,mr8300)
-		caldata_extract "ART" 0x9000 0x2f20
-		# OEM assigns 4 sequential MACs
-		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
-		;;
-	tp-link,ec420-g1)
-		caldata_extract "0:ART" 0x9000 0x2f20
-		;;
-	esac
-	;;
-"ath10k/pre-cal-ahb-a000000.wifi.bin")
-	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	ezviz,cs-w3-wd1200g-eup |\
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-	udaya,a5-id2 |\
-	qcom,ap-dk01.1-c1)
-		caldata_extract "ART" 0x1000 0x2f20
-		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
-		;;
-	asus,map-ac2200)
-		caldata_extract_ubi "Factory" 0x1000 0x2f20
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART=UBI_DEV
-		caldata_extract_ubi "Factory" 0x1000 0x2f20
-		;;
-	avm,fritzbox-4040)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
-		;;
-	avm,fritzbox-7530 |\
-	avm,fritzrepeater-1200 |\
-	avm,fritzrepeater-3000)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
-		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
-		;;
-	cig,wf610d)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +2)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,spw2ac1200 |\
-	edgecore,spw2ac1200-lan-poe |\
-	edgecore,oap100 |\
-	edgecore,oap100e |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m |\
-	wallys,dr40x9)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		;;
-	devolo,magic-2-wifi-next)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
-		;;
-	dlink,dap-2610)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
-		;;
-	engenius,emd1)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
-		;;
-	engenius,emr3500)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		;;
-	engenius,ens620ext)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
-		;;
-	linksys,ea8300 |\
-	linksys,mr8300)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
-		;;
-	meraki,mr33)
-		caldata_extract_ubi "ART" 0x1000 0x2f20
-		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
-		;;
-	mikrotik,hap-ac2)
-		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
-		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
-		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
-		;;
-	netgear,ex6100v2 |\
-	netgear,ex6150v2)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
-		;;
-	zyxel,nbg6617 |\
-	zyxel,wre6606)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
-		;;
-	tp-link,ec420-g1)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		;;
-	hfcl,ion4)
-		caldata_extract "0:ART" 4096 12064
-		ath10k_patch_mac $(mtd_get_mac_ascii 0:ART WLAN0_BASEMAC)
-		;;
-	um-325ac |\
-	um-510ac-v3 |\
-	um-550ac) 
-		caldata_extract "ART" 0x1000 0x2f20
-		;;
-	esac
-	;;
-"ath10k/pre-cal-ahb-a800000.wifi.bin")
-	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	ezviz,cs-w3-wd1200g-eup |\
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-	udaya,a5-id2 |\
-	qcom,ap-dk01.1-c1)
-		caldata_extract "ART" 0x5000 0x2f20
-		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
-		;;
-	asus,map-ac2200)
-		caldata_extract_ubi "Factory" 0x5000 0x2f20
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART=UBI_DEV
-		caldata_extract_ubi "Factory" 0x5000 0x2f20
-		;;
-	avm,fritzbox-4040)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
-		;;
-	avm,fritzbox-7530 |\
-	avm,fritzrepeater-1200 |\
-	avm,fritzrepeater-3000)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
-		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
-		;;
-	cig,wf610d)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +3)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,spw2ac1200 |\
-	edgecore,spw2ac1200-lan-poe |\
-	edgecore,oap100 |\
-	edgecore,oap100e |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m |\
-	wallys,dr40x9)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		;;
-	devolo,magic-2-wifi-next)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
-		;;
-	dlink,dap-2610)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-		;;
-	engenius,emd1)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
-		;;
-	engenius,emr3500)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
-		;;
-	engenius,ens620ext)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
-		;;
-	linksys,ea8300 |\
-	linksys,mr8300)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
-		;;
-	meraki,mr33)
-		caldata_extract_ubi "ART" 0x5000 0x2f20
-		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
-		;;
-	mikrotik,hap-ac2|\
-	mikrotik,sxtsq-5-ac)
-		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
-		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
-		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
-		;;
-	netgear,ex6100v2 |\
-	netgear,ex6150v2)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
-		;;
-	zyxel,nbg6617 |\
-	zyxel,wre6606)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
-		;;
-	hfcl,ion4)
-		caldata_extract "0:ART" 20480 12064
-		ath10k_patch_mac $(mtd_get_mac_ascii 0:ART WLAN1_BASEMAC)
-		;;
-	um-325ac |\
-	um-510ac-v3 |\
-	um-550ac) 
-		caldata_extract "ART" 0x5000 0x2f20
-		;;
-	esac
-	;;
-*)
-	exit 1
-	;;
-esac

feeds/ipq40xx/ipq40xx/base-files/etc/hotplug.d/firmware/40-ct-fw-cfg

@@ -1,32 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-
-fwcfg_symlink() {
-	local chip=$1
-	local path=$2
-
-	ln -s /lib/firmware/ath10k/fwcfg-${chip}.txt /lib/firmware/${FIRMWARE}
-}
-
-case "$FIRMWARE" in                                                         
-ath10k/fwcfg-ahb-a000000.wifi.txt|\
-ath10k/fwcfg-ahb-a800000.wifi.txt)
-	fwcfg_symlink ipq4019
-	
-	;;
-ath10k/fwcfg-pci-0000:01:00.0.txt)
-        case "$(board_name)" in
-        linksys,ea8300)
-                fwcfg_symlink qca9888
-                ;;
-	tp-link,ap2220|\
-	tp-link,ec420-g1)
-		fwcfg_symlink qca9984
-		;;
-	esac
-	;;
-esac
-
-exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/hotplug.d/net/20-smp-tune

@@ -1,67 +0,0 @@
-#!/bin/sh
-[ "$ACTION" = add ] || exit
-
-NPROCS="$(grep -c "^processor.*:" /proc/cpuinfo)"
-[ "$NPROCS" -gt 1 ] || exit
-
-PROC_MASK="$(( (1 << $NPROCS) - 1 ))"
-
-find_irq_cpu() {
-	local dev="$1"
-	local match="$(grep -m 1 "$dev\$" /proc/interrupts)"
-	local cpu=0
-
-	[ -n "$match" ] && {
-		set -- $match
-		shift
-		for cur in `seq 1 $NPROCS`; do
-			[ "$1" -gt 0 ] && {
-				cpu=$(($cur - 1))
-				break
-			}
-			shift
-		done
-	}
-
-	echo "$cpu"
-}
-
-set_hex_val() {
-	local file="$1"
-	local val="$2"
-	val="$(printf %x "$val")"
-	[ -n "$DEBUG" ] && echo "$file = $val"
-	echo "$val" > "$file"
-}
-
-default_ps="$(uci get "network.@globals[0].default_ps")"
-[ -n "$default_ps" -a "$default_ps" != 1 ] && exit 0
-
-exec 512>/var/lock/smp_tune.lock
-flock 512 || exit 1
-
-for dev in /sys/class/net/*; do
-	[ -d "$dev" ] || continue
-
-	# ignore virtual interfaces
-	[ -n "$(ls "${dev}/" | grep '^lower_')" ] && continue
-	[ -d "${dev}/device" ] || continue
-
-	device="$(readlink "${dev}/device")"
-	device="$(basename "$device")"
-	irq_cpu="$(find_irq_cpu "$device")"
-	irq_cpu_mask="$((1 << $irq_cpu))"
-
-	for q in ${dev}/queues/rx-*; do
-		set_hex_val "$q/rps_cpus" "$(($PROC_MASK & ~$irq_cpu_mask))"
-	done
-
-	ntxq="$(ls -d ${dev}/queues/tx-* | wc -l)"
-
-	idx=$(($irq_cpu + 1))
-	for q in ${dev}/queues/tx-*; do
-		set_hex_val "$q/xps_cpus" "$((1 << $idx))"
-		let "idx = idx + 1"
-		[ "$idx" -ge "$NPROCS" ] && idx=0
-	done
-done

feeds/ipq40xx/ipq40xx/base-files/etc/init.d/bootcount

@@ -1,36 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	case $(board_name) in
-	alfa-network,ap120c-ac)
-		[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
-			echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
-		;;
-	linksys,ea6350v3|\
-	linksys,ea8300|\
-	linksys,mr8300)
-		mtd resetbc s_env || true
-		;;
-	edgecore,ecw5211)
-		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | cut -d " " -f1)"
-		case "$part" in
-		rootfs1|\
-		rootfs2)
-			avail=$(fw_printenv -n upgrade_available)
-			[ ${avail} -ne 1 ] && fw_setenv upgrade_available 1
-			fw_setenv bootcount 0
-			;;
-		esac
-		;;
-	edgecore,spw2ac1200|\
-	edgecore,spw2ac1200-lan-poe)
-		avail=$(fw_printenv -n upgrade_available)
-		[ ${avail} -eq 0 ] || {
-			fw_setenv upgrade_available 0
-			fw_setenv bootcount 0
-		}
-		;;
-	esac
-}

feeds/ipq40xx/ipq40xx/base-files/etc/inittab

@@ -1,5 +0,0 @@
-# Copyright (c) 2013 The Linux Foundation. All rights reserved.
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyMSM0::askfirst:/usr/libexec/login.sh
-ttyMSM1::askfirst:/usr/libexec/login.sh

feeds/ipq40xx/ipq40xx/base-files/etc/uci-defaults/04_led_migration

@@ -1,19 +0,0 @@
-. /lib/functions/migrations.sh
-
-board=$(board_name)
-
-case "$board" in
-engenius,emr3500)
-	migrate_leds "emr3500:="
-	;;
-engenius,ens620ext|\
-zyxel,nbg6617)
-	migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
-	;;
-esac
-
-remove_devicename_leds
-
-migrations_apply system
-
-exit 0

feeds/ipq40xx/ipq40xx/base-files/lib/firmware/ath10k/fwcfg-ipq4019.txt

@@ -1,15 +0,0 @@
-vdevs = 8
-peers = 147
-active_peers = 147
-stations = 147
-rate_ctrl_objs = 7
-#regdom = 840
-#fwname = firmware-5-htt-mgt-b.bin
-#fwver = 5
-nohwcrypt = 0
-ct_sta_mode = 0
-tx_desc = 2000
-#max_nss = 3
-tids = 450
-skid_limit = 360
-max_amsdus = 3 

feeds/ipq40xx/ipq40xx/base-files/lib/firmware/ath10k/fwcfg-qca9888.txt

@@ -1,16 +0,0 @@
-# 9888 chip
-vdevs = 8
-peers = 202
-active_peers = 202
-stations = 202
-rate_ctrl_objs = 7
-#regdom = 840
-#fwname = firmware-5-htt-mgt-b.bin
-#fwver = 5
-nohwcrypt = 0
-ct_sta_mode = 0
-tx_desc = 2200
-#max_nss = 3
-tids = 450
-skid_limit = 360
-max_amsdus = 3 

feeds/ipq40xx/ipq40xx/base-files/lib/firmware/ath10k/fwcfg-qca9984.txt

@@ -1,16 +0,0 @@
-# 9984
-vdevs = 8
-peers = 180
-active_peers = 180
-stations = 180
-rate_ctrl_objs = 7
-#regdom = 840
-#fwname = firmware-5-htt-mgt-b.bin
-#fwver = 5
-nohwcrypt = 0
-ct_sta_mode = 0
-tx_desc = 2400
-#max_nss = 3
-tids = 450
-skid_limit = 360
-max_amsdus = 3 

feeds/ipq40xx/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh

@@ -1,39 +0,0 @@
-. /lib/functions.sh
-
-preinit_set_mac_address() {
-	case $(board_name) in
-	asus,map-ac2200)
-		base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
-		ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
-		ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
-		;;
-	cig,wf610d)
-		base_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		ip link set eth0 address "${base_mac}"
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
-		ip link set dev eth1 address $(mtd_get_mac_binary "ART" 0x0)
-		;;
-	engenius,eap2200)
-		base_mac=$(cat /sys/class/net/eth0/address)
-		ip link set dev eth1 address $(macaddr_add "${base_mac}" +1)
-		;;
-	linksys,ea8300|\
-	linksys,mr8300)
-		base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ip link set dev eth0 address "${base_mac}"
-		ip link set dev eth1 address $(macaddr_add "${base_mac}" 1)
-		;;
-	meraki,mr33)
-		mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
-		[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
-		;;
-	zyxel,nbg6617)
-		base_mac=$(cat /sys/class/net/eth0/address)
-		ip link set dev eth0 address $(macaddr_add "$base_mac" +2)
-		ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
-	esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address

feeds/ipq40xx/ipq40xx/base-files/lib/preinit/05_set_threading.sh

@@ -1,7 +0,0 @@
-. /lib/functions.sh
-
-preinit_set_threading() {
-	echo 1 > /sys/class/net/eth0/threaded
-}
-
-boot_hook_add preinit_main preinit_set_threading

feeds/ipq40xx/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh

@@ -1,22 +0,0 @@
-set_preinit_iface() {
-	. /lib/functions.sh
-
-	case $(board_name) in
-	aruba,ap-303| \
-	asus,rt-ac58u| \
-	avm,fritzbox-4040| \
-	ezviz,cs-w3-wd1200g-eup| \
-	glinet,gl-b1300| \
-	linksys,ea8300| \
-	linksys,mr8300| \
-	meraki,mr33| \
-	zyxel,nbg6617)
-		ifname=eth0
-		;;
-	devolo,magic-2-wifi-next)
-		ifname=eth1
-		;;
-	esac
-}
-
-boot_hook_add preinit_main set_preinit_iface

feeds/ipq40xx/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh

@@ -1,108 +0,0 @@
-# The U-Boot loader with the datachk patchset for dualbooting requires image
-# sizes and checksums to be provided in the U-Boot environment.
-# The devices come with 2 main partitions - while one is active
-# sysupgrade will flash the other. The boot order is changed to boot the
-# newly flashed partition. If the new partition can't be booted due to
-# upgrade failures the previously used partition is loaded.
-
-platform_do_upgrade_dualboot_datachk() {
-	local tar_file="$1"
-	local restore_backup
-	local primary_kernel_mtd
-
-	local setenv_script="/tmp/fw_env_upgrade"
-
-	local kernel_mtd="$(find_mtd_index $PART_NAME)"
-	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
-	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
-
-	# detect to which flash region the new image is written to.
-	#
-	# 1. check what is the mtd index for the first flash region on this
-	#    device
-	# 2. check if the target partition ("inactive") has the mtd index of
-	#    the first flash region
-	#
-	#    - when it is: the new bootseq will be 1,2 and the first region is
-	#      modified
-	#    - when it isnt: bootseq will be 2,1 and the second region is
-	#      modified
-	#
-	# The detection has to be done via the hardcoded mtd partition because
-	# the current boot might be done with the fallback region. Let us
-	# assume that the current bootseq is 1,2. The bootloader detected that
-	# the image in flash region 1 is corrupt and thus switches to flash
-	# region 2. The bootseq in the u-boot-env is now still the same and
-	# the sysupgrade code can now only rely on the actual mtd indexes and
-	# not the bootseq variable to detect the currently booted flash
-	# region/image.
-	#
-	# In the above example, an implementation which uses bootseq ("1,2") to
-	# detect the currently booted image would assume that region 1 is booted
-	# and then overwrite the variables for the wrong flash region (aka the
-	# one which isn't modified). This could result in a device which doesn't
-	# boot anymore to Linux until it was reflashed with ap51-flash.
-	local next_boot_part="1"
-	case "$(board_name)" in
-	plasmacloud,pa1200|\
-	openmesh,a42)
-		primary_kernel_mtd=8
-		;;
-	plasmacloud,pa2200|\
-	openmesh,a62)
-		primary_kernel_mtd=10
-		;;
-	*)
-		echo "failed to detect primary kernel mtd partition for board"
-		return 1
-		;;
-	esac
-	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
-	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
-	# rootfs without EOF marker
-	rootfs_length=$((rootfs_length-4))
-
-	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
-	# md5 checksum of rootfs with EOF marker
-	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
-
-	#
-	# add tar support to get_image() to use default_do_upgrade() instead?
-	#
-
-	# take care of restoring a saved config
-	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
-
-	mtd -q erase inactive
-	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
-	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
-
-	# prepare new u-boot env
-	if [ "$next_boot_part" = "1" ]; then
-		echo "bootseq 1,2" > $setenv_script
-	else
-		echo "bootseq 2,1" > $setenv_script
-	fi
-
-	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
-	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
-	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
-	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
-
-	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
-	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
-	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
-	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
-
-	# store u-boot env changes
-	mkdir -p /var/lock
-	fw_setenv -s $setenv_script || {
-		echo "failed to update U-Boot environment"
-		return 1
-	}
-}

feeds/ipq40xx/ipq40xx/base-files/lib/upgrade/linksys.sh

@@ -1,122 +0,0 @@
-linksys_get_target_firmware() {
-	local cur_boot_part mtd_ubi0
-
-	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
-	if [ -z "${cur_boot_part}" ]; then
-		mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
-		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
-		kernel|rootfs)
-			cur_boot_part=1
-			;;
-		alt_kernel|alt_rootfs)
-			cur_boot_part=2
-			;;
-		esac
-		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
-			"${cur_boot_part}" "${mtd_ubi0}"
-	fi
-
-	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
-	#  if test $auto_recovery = no;
-	#      then bootipq;
-	#  elif test $boot_part = 1;
-	#      then run bootpart1;
-	#      else run bootpart2;
-	#  fi
-
-	case "$cur_boot_part" in
-	1)
-		fw_setenv -s - <<-EOF
-			boot_part 2
-			auto_recovery yes
-		EOF
-		printf "alt_kernel"
-		return
-		;;
-	2)
-		fw_setenv -s - <<-EOF
-			boot_part 1
-			auto_recovery yes
-		EOF
-		printf "kernel"
-		return
-		;;
-	*)
-		return
-		;;
-	esac
-}
-
-linksys_get_root_magic() {
-	(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
-}
-
-platform_do_upgrade_linksys() {
-	local magic_long="$(get_magic_long "$1")"
-
-	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
-	local vol
-
-	mkdir -p /var/lock
-	local part_label="$(linksys_get_target_firmware)"
-	touch /var/lock/fw_printenv.lock
-
-	if [ -z "$part_label" ]; then
-		echo "cannot find target partition"
-		exit 1
-	fi
-
-	local target_mtd=$(find_mtd_part "$part_label")
-
-	[ "$magic_long" = "73797375" ] && {
-		CI_KERNPART="$part_label"
-		if [ "$part_label" = "kernel" ]; then
-			CI_UBIPART="rootfs"
-		else
-			CI_UBIPART="alt_rootfs"
-		fi
-
-		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
-		if [ ! "$mtdnum" ]; then
-			echo "cannot find ubi mtd partition $CI_UBIPART"
-			return 1
-		fi
-
-		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
-		if [ ! "$ubidev" ]; then
-			ubiattach -m "$mtdnum"
-			sync
-			ubidev="$(nand_find_ubi "$CI_UBIPART")"
-		fi
-
-		if [ "$ubidev" ]; then
-			for vol in $rm_oem_fw_vols; do
-				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
-			done
-		fi
-
-		# complete std upgrade
-		nand_upgrade_tar "$1"
-	}
-
-	[ "$magic_long" = "27051956" ] && {
-		# This magic is for a uImage (which is a sysupgrade image)
-		# check firmwares' rootfs types
-		local oldroot="$(linksys_get_root_magic "$target_mtd")"
-		local newroot="$(linksys_get_root_magic "$1")"
-
-		if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
-			# we're upgrading from a firmware with UBI to one with UBI
-			# erase everything to be safe
-			# - Is that really needed? Won't remove (or comment) the if,
-			#   because it may be needed in a future device.
-			#mtd erase $part_label
-			#get_image "$1" | mtd -n write - $part_label
-			echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
-			get_image "$1" | mtd write - "$part_label"
-		else
-			echo "writing \"$1\" image to \"$part_label\""
-			get_image "$1" | mtd write - "$part_label"
-		fi
-	}
-}

feeds/ipq40xx/ipq40xx/base-files/lib/upgrade/platform.sh

@@ -1,160 +0,0 @@
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-RAMFS_COPY_BIN='fw_printenv fw_setenv'
-RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
-
-platform_check_image() {
-	case "$(board_name)" in
-	asus,rt-ac58u)
-		CI_UBIPART="UBI_DEV"
-		local ubidev=$(nand_find_ubi $CI_UBIPART)
-		local asus_root=$(nand_find_volume $ubidev jffs2)
-
-		[ -n "$asus_root" ] || return 0
-
-		cat << EOF
-jffs2 partition is still present.
-There's probably no space left
-to install the filesystem.
-
-You need to delete the jffs2 partition first:
-# ubirmvol /dev/ubi0 --name=jffs2
-
-Once this is done. Retry.
-EOF
-		return 1
-		;;
-	esac
-	return 0;
-}
-
-askey_do_upgrade() {
-	local tar_file="$1"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
-
-	nand_do_upgrade "$1"
-}
-
-zyxel_do_upgrade() {
-	local tar_file="$1"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
-
-	if [ -n "$UPGRADE_BACKUP" ]; then
-		tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
-	else
-		tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
-	fi
-}
-
-platform_do_upgrade() {
-	case "$(board_name)" in
-	8dev,jalapeno |\
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365 |\
-	avm,fritzbox-7530 |\
-	avm,fritzrepeater-1200 |\
-	avm,fritzrepeater-3000 |\
-	buffalo,wtr-m2133hp |\
-	cilab,meshpoint-one |\
-	edgecore,oap100 |\
-	edgecore,oap100e |\
-	engenius,eap2200 |\
-	glinet,gl-ap1300 |\
-	luma,wrtq-329acn |\
-	mobipromo,cm520-79f |\
-	qxwlan,e2600ac-c2 |\
-	wallys,dr40x9 |\
-	hfcl,ion4 |\
-	tp-link,ec420-g1)
-		nand_do_upgrade "$1"
-		;;
-	edgecore,ecw5211)
-		mkdir -p /var/lock/
-		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | cut -d " " -f 1)"
-		case "$part" in
-		rootfs1)
-			CI_UBIPART="rootfs2"
-			CI_FWSETENV="active 2"
-			;;
-		rootfs2)
-			CI_UBIPART="rootfs1"
-			CI_FWSETENV="active 1"
-			;;
-		*)
-			# legacy bootloader
-			;;
-		esac
-		nand_do_upgrade "$1"
-		;;
-	alfa-network,ap120c-ac)
-		mkdir -p /var/lock/
-		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
-		if [ "$part" = "rootfs1" ]; then
-			fw_setenv active 2 || exit 1
-			CI_UBIPART="rootfs2"
-		else
-			fw_setenv active 1 || exit 1
-			CI_UBIPART="rootfs1"
-		fi
-		nand_do_upgrade "$1"
-		;;
-	edgecore,spw2ac1200|\
-	edgecore,spw2ac1200-lan-poe)
-		CI_UBIPART="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
-		nand_do_upgrade "$1"
-		;;
-	asus,map-ac2200)
-		CI_KERNPART="linux"
-		nand_do_upgrade "$1"
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART="UBI_DEV"
-		CI_KERNPART="linux"
-		nand_do_upgrade "$1"
-		;;
-	cellc,rtl30vw)
-		CI_UBIPART="ubifs"
-		askey_do_upgrade "$1"
-		;;
-	compex,wpj419)
-		nand_do_upgrade "$1"
-		;;
-	linksys,ea6350v3 |\
-	linksys,ea8300 |\
-	linksys,mr8300)
-		platform_do_upgrade_linksys "$1"
-		;;
-	meraki,mr33)
-		CI_KERNPART="part.safe"
-		nand_do_upgrade "$1"
-		;;
-	mikrotik,hap-ac2|\
-	mikrotik,sxtsq-5-ac)
-		[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
-		default_do_upgrade "$1"
-		;;
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200)
-		PART_NAME="inactive"
-		platform_do_upgrade_dualboot_datachk "$1"
-		;;
-	zyxel,nbg6617)
-		zyxel_do_upgrade "$1"
-		;;
-	*)
-		default_do_upgrade "$1"
-		;;
-	esac
-}

feeds/ipq40xx/ipq40xx/config-5.4

@@ -1,470 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APQ_GCC_8084 is not set
-# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR40XX_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_IPQ40XX=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-# CONFIG_ARCH_MDM9615 is not set
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MSM8960 is not set
-# CONFIG_ARCH_MSM8974 is not set
-# CONFIG_ARCH_MSM8X60 is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCH=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_QCOM=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_QCE=y
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
-CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
-CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
-CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
-CONFIG_CRYPTO_DEV_QCOM_RNG=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ESSEDMA=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_WATCHDOG=y
-CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OPTEE=y
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_QUP=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IO_URING=y
-CONFIG_IPQ_GCC_4019=y
-# CONFIG_IPQ_GCC_806X is not set
-# CONFIG_IPQ_GCC_8074 is not set
-# CONFIG_IPQ_LCC_806X is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KPSS_XCC is not set
-# CONFIG_KRAITCC is not set
-CONFIG_LEDS_LP5523=y
-CONFIG_LEDS_LP5562=y
-CONFIG_LEDS_LP55XX_COMMON=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MDIO_IPQ4019=y
-# CONFIG_MDM_GCC_9615 is not set
-# CONFIG_MDM_LCC_9615 is not set
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_QCOM_RPM is not set
-# CONFIG_MFD_SPMI_PMIC is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_MSM=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MSM_GCC_8660 is not set
-# CONFIG_MSM_GCC_8916 is not set
-# CONFIG_MSM_GCC_8960 is not set
-# CONFIG_MSM_GCC_8974 is not set
-# CONFIG_MSM_GCC_8994 is not set
-# CONFIG_MSM_GCC_8996 is not set
-# CONFIG_MSM_GCC_8998 is not set
-# CONFIG_MSM_LCC_8960 is not set
-# CONFIG_MSM_MMCC_8960 is not set
-# CONFIG_MSM_MMCC_8974 is not set
-# CONFIG_MSM_MMCC_8996 is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_BCH=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_QCOM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NLS=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OPTEE=y
-CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_QCOM_APQ8064_SATA is not set
-CONFIG_PHY_QCOM_IPQ4019_USB=y
-# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
-# CONFIG_PHY_QCOM_PCIE2 is not set
-# CONFIG_PHY_QCOM_QMP is not set
-# CONFIG_PHY_QCOM_QUSB2 is not set
-# CONFIG_PHY_QCOM_UFS is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_APQ8064 is not set
-# CONFIG_PINCTRL_APQ8084 is not set
-CONFIG_PINCTRL_IPQ4019=y
-# CONFIG_PINCTRL_IPQ8064 is not set
-# CONFIG_PINCTRL_IPQ8074 is not set
-# CONFIG_PINCTRL_MDM9615 is not set
-CONFIG_PINCTRL_MSM=y
-# CONFIG_PINCTRL_MSM8660 is not set
-# CONFIG_PINCTRL_MSM8916 is not set
-# CONFIG_PINCTRL_MSM8960 is not set
-# CONFIG_PINCTRL_MSM8994 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-# CONFIG_PINCTRL_MSM8998 is not set
-# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
-# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
-# CONFIG_PINCTRL_QCS404 is not set
-# CONFIG_PINCTRL_SC7180 is not set
-# CONFIG_PINCTRL_SDM660 is not set
-# CONFIG_PINCTRL_SDM845 is not set
-# CONFIG_PINCTRL_SM8150 is not set
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_MSM=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_QCA807X_PHY=y
-CONFIG_QCOM_A53PLL=y
-CONFIG_QCOM_BAM_DMA=y
-# CONFIG_QCOM_COMMAND_DB is not set
-# CONFIG_QCOM_EBI2 is not set
-# CONFIG_QCOM_GENI_SE is not set
-# CONFIG_QCOM_GSBI is not set
-# CONFIG_QCOM_HFPLL is not set
-# CONFIG_QCOM_IOMMU is not set
-# CONFIG_QCOM_LLCC is not set
-# CONFIG_QCOM_PDC is not set
-CONFIG_QCOM_PM=y
-CONFIG_QCOM_QFPROM=y
-# CONFIG_QCOM_RMTFS_MEM is not set
-CONFIG_QCOM_SCM=y
-CONFIG_QCOM_SCM_32=y
-# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
-CONFIG_QCOM_SMEM=y
-# CONFIG_QCOM_SMSM is not set
-# CONFIG_QCOM_SOCINFO is not set
-CONFIG_QCOM_TCSR=y
-# CONFIG_QCOM_TSENS is not set
-CONFIG_QCOM_WDT=y
-# CONFIG_QCS_GCC_404 is not set
-# CONFIG_QCS_TURING_404 is not set
-# CONFIG_QRTR is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-CONFIG_REGULATOR_VCTRL=y
-CONFIG_REGULATOR_VQMMC_IPQ4019=y
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_RESET_QCOM_AOSS is not set
-# CONFIG_RESET_QCOM_PDC is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SDM_CAMCC_845 is not set
-# CONFIG_SDM_DISPCC_845 is not set
-# CONFIG_SDM_GCC_660 is not set
-# CONFIG_SDM_GCC_845 is not set
-# CONFIG_SDM_GPUCC_845 is not set
-# CONFIG_SDM_LPASSCC_845 is not set
-# CONFIG_SDM_VIDEOCC_845 is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-# CONFIG_SM_GCC_8150 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_QUP=y
-CONFIG_SPMI=y
-CONFIG_SPMI_MSM_PMIC_ARB=y
-# CONFIG_SPMI_PMIC_CLKDIV is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TEE=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UBIFS_FS_ZSTD=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts

@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: ISC
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "OpenMesh A42";
-	compatible = "openmesh,a42";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_green;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_green;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status_red {
-			label = "red:status";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_green: status_green {
-			label = "green:status";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		status_blue {
-			label = "blue:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		/* hw_margin_ms is actually 300s but driver limits it to 60s */
-		hw_margin_ms = <60000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		/* partitions are passed via bootloader */
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts

@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
-
-	aliases {
-		led-boot = &status;
-		led-failsafe = &status;
-		led-running = &status;
-		led-upgrade = &status;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status: status {
-			label = "blue:status";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wan {
-			label = "amber:wan";
-			gpios = <&ethphy4 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "green:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "red:wlan5g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				phys = <&usb3_hs_phy>;
-				phy-names = "usb2-phy";
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	tpm@29 {
-		compatible = "atmel,at97sc3204t";
-		reg = <0x29>;
-	};
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm  4 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "priv_data1";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition@190000 {
-				label = "priv_data2";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	nand@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "rootfs1";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@4000000 {
-				label = "rootfs2";
-				reg = <0x04000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial0_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&ethphy4 {
-	gpio-controller;
-	#gpio-cells = <2>;
-};
-
-&gmac0 {
-	qcom,forced_duplex = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
-	qcom,forced_duplex = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&tlmm {
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_mdc {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial0_pins: serial0_pinmux {
-		mux_uart {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi0_pins: spi0_pinmux {
-		mux_spi {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio4";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts

@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EZVIZ CS-W3-WD1200G EUP";
-	compatible = "ezviz,cs-w3-wd1200g-eup";
-
-	aliases {
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_green;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <5000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status_red: status_red {
-			label = "red:status";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_green: status_green {
-			label = "green:status";
-			gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_blue: status_blue {
-			label = "blue:status";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition9@580000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00180000 0x00e80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts

@@ -1,241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "D-Link DAP 2610";
-	compatible = "dlink,dap-2610";
-
-	aliases {
-		led-boot = &led_red;
-		led-failsafe = &led_red;
-		led-running = &led_green;
-		led-upgrade = &led_red;
-	};
-
-	soc {
-		edma@c080000 {
-			qcom,num_gmac = <1>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		rng@22000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x20>;
-			switch_wan_bmp = <0x00>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_red: red {
-			label = "red:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-		};
-
-		led_green: green {
-			label = "green:power";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fixed-partitions";
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-			partition@180000 {
-				compatible = "wrg";
-				label = "firmware";
-				reg = <0x180000 0xdc0000>;
-			};
-			partition@fb0000 {
-				label = "rgbd";
-				reg = <0xfb0000 0x10000>;
-				read-only;
-			};
-			partition@fc0000 {
-				label = "bdcfg";
-				reg = <0xfc0000 0x10000>;
-				read-only;
-			};
-			partition@fd0000 {
-				label = "langpack";
-				reg = <0xfd0000 0x20000>;
-				read-only;
-			};
-			partition@ff0000 {
-				label = "certificate";
-				reg = <0xff0000 0x10000>;
-				read-only;
-			};
-			partition@f40000 {
-				label = "captival";
-				reg = <0xf40000 0x70000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x20>;
-};
-
-&mdio {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts

@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Linksys EA6350v3";
-	compatible = "linksys,ea6350v3";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: status {
-			label = "green:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			MBIB@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			QSEE@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			CDT@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			APPSBLENV@d0000 {
-				label = "APPSBLENV";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			APPSBL@e0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000e0000 0x00080000>;
-				read-only;
-			};
-			ART@160000 {
-				label = "ART";
-				reg = <0x00160000 0x00010000>;
-				read-only;
-			};
-			u_env@170000 {
-				label = "u_env";
-				reg = <0x00170000 0x00020000>;
-			};
-			s_env@190000 {
-				label = "s_env";
-				reg = <0x00190000 0x00020000>;
-			};
-			devinfo@1b0000 {
-				label = "devinfo";
-				reg = <0x001b0000 0x00010000>;
-			};
-			/* 0x001c0000 - 0x00200000 unused */
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			kernel@0 {
-				label = "kernel";
-				reg = <0x00000000 0x02800000>;
-			};
-			rootfs@300000 {
-				label = "rootfs";
-				reg = <0x00300000 0x02500000>;
-			};
-			alt_kernel@2800000 {
-				label = "alt_kernel";
-				reg = <0x02800000 0x02800000>;
-			};
-			alt_rootfs@2b00000 {
-				label = "alt_rootfs";
-				reg = <0x02b00000 0x02500000>;
-			};
-			sysdiag@5000000 {
-				label = "sysdiag";
-				reg = <0x05000000 0x00100000>;
-			};
-			syscfg@5100000 {
-				label = "syscfg";
-				reg = <0x05100000 0x02F00000>;
-			};
-			/* 0x00000000 - 0x08000000: 128 MiB */
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts

@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius EAP1300";
-	compatible = "engenius,eap1300";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: orange {
-			label = "orange:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "blue:lan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		mesh {
-			label = "blue:mesh";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "yellow:wlan5g";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio54", "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00090000>;
-				read-only;
-			};
-			partition7@180000 {
-				label = "0:ART";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-			partition8@190000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x190000 0x1dc0000>;
-			};
-			partition9@1f50000 {
-				label = "u-boot-env";
-				reg = <0x01f50000 0x00010000>;
-			};
-			partition10@1f60000 {
-				label = "userconfig";
-				reg = <0x01f60000 0x000a0000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts

@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Edgecore ECW5211";
-	compatible = "edgecore,ecw5211";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-		label-mac-device = &gmac0;
-	};
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "yellow:power";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "green:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "green:wlan5g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				phys = <&usb3_hs_phy>;
-				phy-names = "usb2-phy";
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_mdc {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi0_pins: spi0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio4";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "0:APPSBLENV"; /* uboot env */
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "0:APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	flash@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "rootfs";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@1 {
-				label = "rootfs1";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@4000000 {
-				label = "rootfs2";
-				reg = <0x04000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	tpm@29 {
-		compatible = "atmel,at97sc3204t";
-		reg = <0x29>;
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-};
-
-&gmac0 {
-	qcom,poll_required = <1>;
-	qcom,phy_mdio_addr = <4>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,poll_required = <1>;
-	qcom,phy_mdio_addr = <3>;
-	vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts

@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius EMD1";
-	compatible = "engenius,emd1";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x20>;
-			switch_wan_bmp = <0x00>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "white:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "red:wlan2g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "blue:wlan5g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		mesh {
-			label = "orange:mesh";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio54", "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition7@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition8@180000 {
-				label = "userconfig";
-				reg = <0x00180000 0x00080000>;
-				read-only;
-			};
-			partition9@200000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x200000 0x01e00000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x20>;
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts

@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius EMR3500";
-	compatible = "engenius,emr3500";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2_hs_phy: hsphy@a8000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: white {
-			label = "white:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "blue";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		red {
-			label = "red";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		orange {
-			label = "orange";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio54", "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "userconfig";
-				reg = <0x00180000 0x00080000>;
-				read-only;
-			};
-			partition@200000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x200000 0x1e00000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
-	vlan_tag = <2 0x20>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts

@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius ENS620EXT";
-	compatible = "engenius,ens620ext";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		/*
-		 * Disable the broken restart as a workaround for the buggy
-		 * 3.0.0/3.0.1 U-boots that ship with the device.
-		 * Note: The watchdog is now used to restart this device.
-		 */
-		restart@4ab000 {
-			status = "disabled";
-		};
-	};
-
-	buttons {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "amber:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "green:lan1";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "green:lan2";
-			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "green:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "green:wlan5g";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00090000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "ART";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-			partition@190000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00190000 0x14d0000>;
-			};
-			partition@1660000 {
-				label = "failsafe";
-				reg = <0x01660000 0x008F0000>;
-				read-only;
-			};
-			partition@1f50000 {
-				label = "u-boot-env";
-				reg = <0x01f50000 0x00010000>;
-				read-only;
-			};
-			partition@1f60000 {
-				label = "userconfig";
-				reg = <0x01f60000 0x000a0000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts

@@ -1,31 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-
-/ {
-	model = "Netgear EX6100v2";
-	compatible = "netgear,ex6100v2";
-};
-
-&wifi0 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
-
-&wifi1 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts

@@ -1,31 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-
-/ {
-	model = "Netgear EX6150v2";
-	compatible = "netgear,ex6150v2";
-};
-
-&wifi0 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
-
-&wifi1 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi

@@ -1,312 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Netgear EX61X0v2";
-	compatible = "netgear,ex61x0v2";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	aliases {
-		led-boot = &power_amber;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-		led-upgrade = &power_amber;
-		label-mac-device = &gmac0;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	led_spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <0>;
-
-		led_gpio: led_gpio@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			registers-number = <1>;
-			spi-max-frequency = <1000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_amber: power_amber {
-			label = "amber:power";
-			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power_green {
-			label = "green:power";
-			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		right {
-			label = "blue:right";
-			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
-		};
-
-		left {
-			label = "blue:left";
-			gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		client_green {
-			label = "green:client";
-			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
-		};
-
-		client_red {
-			label = "red:client";
-			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
-		};
-
-		router_green {
-			label = "green:router";
-			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		router_red {
-			label = "red:router";
-			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l12805d@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition8@180000 {
-				label = "config";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition9@190000 {
-				label = "pot";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-
-			partition10@1a0000 {
-				label = "dnidata";
-				reg = <0x001a0000 0x00010000>;
-				read-only;
-			};
-
-			partition11@1b0000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x001b0000 0x00e10000>;
-			};
-
-			partition12@fc0000 {
-				label = "language";
-				reg = <0x00fc0000 0x00040000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts

@@ -1,309 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Box 4040";
-	compatible = "avm,fritzbox-4040";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &flash;
-		led-running = &power;
-		led-upgrade = &flash;
-		label-mac-device = &gmac0;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	switch-leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "green:wlan";
-			gpios = <&ethphy0 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		panic: info_red {
-			label = "red:info";
-			gpios = <&ethphy0 1 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		wan {
-			label = "green:wan";
-			gpios = <&ethphy1 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "green:power";
-			gpios = <&ethphy2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "green:lan";
-			gpios = <&ethphy3 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		flash: info_amber {
-			label = "amber:info";
-			gpios = <&ethphy3 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		status = "okay";
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBLENV"; /* uboot env - empty */
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "urlader"; /* APPSBL */
-				reg = <0x000f0000 0x0002dc000>;
-				read-only;
-			};
-			partition7@11dc00 {
-				/* make a backup of this partition! */
-				label = "urlader_config";
-				reg = <0x0011dc00 0x00002400>;
-				read-only;
-			};
-			partition8@120000 {
-				label = "tffs1";
-				reg = <0x00120000 0x00080000>;
-				read-only;
-			};
-			partition9@1a0000 {
-				label = "tffs2";
-				reg = <0x001a0000 0x00080000>;
-				read-only;
-			};
-			partition10@220000 {
-				label = "uboot";
-				reg = <0x00220000 0x00080000>;
-				read-only;
-			};
-			partition11@2A0000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x002a0000 0x01c60000>;
-			};
-			partition12@1f00000 {
-				label = "jffs2";
-				reg = <0x01f00000 0x00100000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ethphy0 {
-	gpio-controller;
-	#gpio-cells = <2>;
-};
-
-&ethphy1 {
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	enable-usb-power {
-		gpio-hog;
-		line-name = "enable USB3 power";
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&ethphy2 {
-	gpio-controller;
-	#gpio-cells = <2>;
-};
-
-&ethphy3 {
-	gpio-controller;
-	#gpio-cells = <2>;
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts

@@ -1,269 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "GL.iNet GL-AP1300";
-	compatible = "glinet,gl-ap1300";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x18>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "green:power";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		wan {
-			label = "green:wan";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		status = "okay";
-
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	spi-nand@1 {
-		status = "okay";
-
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi0_pins: spi0_pinmux {
-		mux_spi {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio5";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GL-AP1300";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GL-AP1300";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts

@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "MikroTik hAP ac2";
-	compatible = "mikrotik,hap-ac2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x08000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		led-boot = &led_user;
-		led-failsafe = &led_user;
-		led-running = &led_user;
-		led-upgrade = &led_user;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				phys = <&usb3_hs_phy>;
-				phy-names = "usb2-phy";
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		mode {
-			label = "mode";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "green:power";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			panic-indicator;
-		};
-
-		led_user: user {
-			label = "green:user";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <2>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	enable-usb-power {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "enable USB power";
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "Qualcomm";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				compatible = "mikrotik,routerboot-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				label = "RouterBoot";
-				reg = <0x80000 0x80000>;
-				read-only;
-
-				hard_config {
-					read-only;
-					size = <0x2000>;
-				};
-
-				dtb_config {
-					read-only;
-				};
-
-				soft_config {
-				};
-			};
-
-			partition@100000 {
-				compatible = "mikrotik,minor";
-				label = "firmware";
-				reg = <0x100000 0xf00000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-};
-
-&ethphy0 {
-	qcom,single-led-1000;
-	qcom,single-led-100;
-	qcom,single-led-10;
-};
-
-&ethphy1 {
-	qcom,single-led-1000;
-	qcom,single-led-100;
-	qcom,single-led-10;
-};
-
-&ethphy2 {
-	qcom,single-led-1000;
-	qcom,single-led-100;
-	qcom,single-led-10;
-};
-
-&ethphy3 {
-	qcom,single-led-1000;
-	qcom,single-led-100;
-	qcom,single-led-10;
-};
-
-&ethphy4 {
-	qcom,single-led-1000;
-	qcom,single-led-100;
-	qcom,single-led-10;
-};
-
-&wifi0 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
-};
-
-&wifi1 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
-};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts

@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
-	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
-};